Neptune E4000 Operator's Manual

Below you will find brief information for E4000 LPG Dispensing Register. This guide provides comprehensive instructions for operating the Neptune E4000 LPG Dispensing Register, focusing on "NON-PRESET" BATCH mode deliveries. Users can learn how to initiate a delivery, select products, monitor gross price and volume, control the security valve, and complete deliveries. The document also covers procedures for printing delivery tickets and generating shift reports.

PDF

Document

QSG-303-3

Rev. B 1/05

Operators Guide for LPG, with security valve

(“NON-PRESET” BATCH mode).

How to make a delivery

1. Insert ticket in the printer

2. From the “ NEPTUNE ” root menu, press either of the white buttons or on the four button front control panel, until “ ROUTE ” is flashing. Then press the green

START/ENTER button.

NEPTUNE

ROUTE SUPERVISOR W&M

3. Press or until “ DELIVERY ” is flashing, then press the START/ENTER button.

DELIVERY VOL REPORTS

Press or until the product that you intend to deliver is displaying in the “ SELECT

PRODUCT ” menu, then press the START/ENTER button to confirm the correct product.

For a priced product the display will show the gross price, confirm this is the correct price by pressing the START/ENTER button, or press STOP/CANCEL to return to the

“ SELECT PRODUCT ” menu.

SELECT PRODUCT

FUEL #1

GROSS PRICE $/VOL

__ $/ GAL

5. The display will reset and after 10 seconds the register will open the security valve.

NET/TOT $/VOL

NET 60 F 0.0 GAL

6. You can now open the manual valve to begin delivering product.

7. When the delivery is complete close the manual valve.

8. Press the STOP/CANCEL button to close the security valve.

Note : pressing the START/ENTER button again will re-open the security valve to continue the delivery.

To print a delivery ticket for LPG, “NON-PRESET” BATCH mode

1. Insert the ticket in the printer.

2. When the delivery is completed press the red STOP/CANCEL button to close the security valve (if you didn’t do it for the step 8 ).

3. Press the STOP/CANCEL button again to print the delivery ticket. If additional copies of the delivery ticket are required press the START/ENTER button once for each copy required (each copy will have “ DUPLICATE ” printed at the bottom).

4. After printing the ticket, press the STOP/CANCEL button to complete the delivery and return to the “ SELECT PRODUCT ” menu. To return to the NEPTUNE root menu press the STOP/CANCEL button 2 times.

Note : The delivery ticket will be printed automatically, three minutes after the delivery is completed, without pressing any buttons if “ MULTIPLE DELIVERIES ” is disabled.

To print a shift report

1. From the NEPTUNE root menu, press either or , on the four button front panel, until “ ROUTE ” is flashing, then press the START/ENTER button.

NEPTUNE

ROUTE SUPERVISOR W&M

2. Press or until “ REPORTS ” is flashing, then press the START/ENTER button.

DELIVERY VOL REPORTS

3. Press or until “ SHIFT ” is flashing, then press the START/ENTER button.

SHIFT CALIBRATION

4. Press the START/ENTER button when the display reads “ PRINT-END-OF SHIFT

REPORT ?”

PRINT END-OF-SHIFT

REPORT?

The end of shift report will now print.

Hello! I'm your AI assistant and I've carefully reviewed the Operators Guide for the Neptune E4000 LPG Dispensing Register. This document provides detailed steps on how to make a delivery in "NON-PRESET" BATCH mode, including how to handle the security valve, print delivery tickets, and generate essential shift reports. Feel free to ask me any questions you have about operating your Neptune E4000 device, and I'll do my best to provide clear and accurate answers based on the guide's content.

Show related prompts

Assistant typing

Assistant is out of keyboard. Please, try again later.

Key features

LPG delivery with security valve
Non-preset batch mode operation
Product selection and gross price display
Volume tracking during delivery (NET/TOT, GAL)
Manual valve control integration
Automated and manual delivery ticket printing
Shift report generation

Frequently asked questions

From the "NEPTUNE" root menu, press the white buttons until "ROUTE" is flashing, then press START/ENTER. Next, press until "DELIVERY" is flashing and press START/ENTER. Select your product and confirm the price, then the register will open the security valve after 10 seconds, allowing you to open the manual valve to begin.

After completing the delivery, press the red STOP/CANCEL button to close the security valve. Press STOP/CANCEL again to print the delivery ticket. For additional copies, press START/ENTER once for each duplicate needed.

From the "NEPTUNE" root menu, press the white buttons until "ROUTE" is flashing, then press START/ENTER. Continue pressing the appropriate buttons until "REPORTS" is flashing, then select it. Next, select "SHIFT" and confirm when the display reads "PRINT-END-OF SHIFT REPORT?" by pressing START/ENTER.

If you have closed the security valve by pressing STOP/CANCEL but need to continue the delivery, simply press the START/ENTER button again to re-open the security valve.