Rosewill 80 PLUS HIVE-550 User Manual
Rosewill 80 PLUS HIVE-550
The Rosewill HIVE-550 is a reliable and efficient power supply unit designed to deliver stable power to your computer system. With its 80 PLUS Bronze certification, this power supply offers up to 85% energy efficiency, reducing your energy consumption and saving you money on your electricity bills.
The HIVE-550 features a full modular cable design, providing you with the flexibility to use only the cables you need, reducing clutter and improving airflow within your system. It is equipped with a 135mm fan with automatic speed control, ensuring optimal cooling and reducing noise levels.
PDF
Download
Document
Advertisement
Advertisement
Package Content Connector Installation Easy Trouble shooting Features •Contents If your PCmake system sure the power not respond, supplyplease is not connected make following to thechecks: AC power cord. • Please ATX12V v2.31 &does EPS12V v2.92 HIVE-550 HIVE-550 HIVE-650 •1. makesure sure the theI/O ACswitch powerofcord the is PSU connected is at off firmly “O” position. and the AC power HIVE-750 switch is • Make 80PLUS BRONZE Certified • Power Supply •Full Modular Cable Set Range Active-PFC •• Install turned the on.power supply into the 1chassis. (refer to your 1chassis manual) 1 ATX 20+4 pin Features P. 2 • Eup Ready • User Manual 2x PCI-E 6+2-pin cable • Please 2. Make sure refer all to DC youroutput motherboard connectors userare manual connected to confirm in the20-pin right direction or 24-pinand main • Multi-GPU Support - 2/4 x PCI-E1 6+2-pin Connector • 1AC Power Cord 2x Four SATA cable ATX/EPS12V 4/8 pinIf 24-pin, you connector plugged firmly. it needs. can plug the 24-pin main connector onto1the • Silent 135mm Fan with Auto Speed • Cable Ties 2x Two Molex + One Floppy cableControl P. 2 Input & Ouput Rating 3. motherboard. Check whether If 20-pin, there is please any short detach circuit theproblem 4-pin to or have defective a 20-pin peripherals main connector by • Modular Cable Design • Mounting Screws 1 EPS12V 8 pin then unplugging plug it onto each the peripheral motherboard. device one at a time. • High Quality Japanese Primary Capacitor • Bag for Modular Cables Package Content P. 3and Over Current/Voltage/Temperature/Power Protection, Voltage Protection •• Please 4. If one of refer the to above your motherboard mentioned problems user manual occurs, to confirm please remove 4-pin ATX12V the fault orand 2 2Under 4 PCI-E 6+2 pin Short Circuit Protection 8-pin wait for EPS12V 1-2 minutes connector before it needs. you turnIf on 8-pin, the you PSUcan again. plug This the 8-pin is necessary EPS12Vtoconnector Connector • SATA 3-Year Warranty - One to One Replacement 8 protection 8P. 4 onto release the the motherboard. latch condition If 4-pin, of the please detachcircuit. the 4-pin8 to have a 4-pin ATX12V 5.connector If the PSUthen is still plug unable it onto to the power motherboard. upHIVE-650 after above checks, please contact with 4 4 6P. 4 Molex 4& pinOutput Rating Input Caution • Connect your dealer the PCI-E for service. connector to the VGA card if needed. Please refer to VGA card • Power Supply • Modular Cable Set manual HIVE-550 to confirm 6-pin or 8-pin2needed. 2 Floppy • 2User Manual 2x PCI-E 6+2-pin cable Installation P. 5 • Connect the SATA connector to the SATA HDD, Optical device if any. +12V OUTPUT +3.3V +5V -12V • AC Power Cord+5VSB 2x FourDC SATA cable • Connect the Molex connector devices22A such as Optical device, • Cable Ties 2x TwoMAX.Current Molex + One Floppytocable 38A 22A 0.3A 3.0A Information Easy Trouble Shooting P. 6 HDD, fan…etc. • Mounting6W Screws15W Combined Power 130W 456W Caution • Connect thefor Floppy disk connector to the floppy Rosewill drive• ifBag any.Product. Modular Cables Thank you purchasing a High-Quality Total Power 550W for Information P. 7 ••Please not store power in a high humid or to be Pleasedo connect thethe other sidesupply of the cable to the PSUtemperature according toplace, the instruction Please register product at : www.rosewill.com for complete warranty BRONZE used in PSU suchyour condition. on the information HIVE-650 and future support for your product.If you have any question while •using voltages in the Unless authorized personnel, please •High Make sure allexist the connectors fully seated. our products, please feelpower free are to supply. contact us at [email protected] +12V not open PSU cover. warranty will be void if the cover is removed. DC OUTPUT +5V -12V +5VSB HIVE-750 •do Connect thethe AC power cordThe to +3.3V the power supply. •Support Do not insert any objects into the22A open ventilation or fan grill area of the 3.0A power supply. MAX.Current 22A 0.3A Phone Number: • Turn on the power supply by800-575-9885 pushing the I/O switch46A to the “I” position. • Power Supply • Modular Cable Set •Support Please use [email protected] genuine modular cables. Third party3.6W cables might Email: Combined PowerRosewill 130W 15W not be 552W • User Manual 4x PCI-E 6+2-pin cable compatible and could cause serious damage to your system and power supply. Power 650W • AC Power Cord 2x FourTotal SATA cable The warranty will be voided with the use of third party cables. • Cable Ties 2x Three Molex + One Floppy cable • The 24 pin main power connector has a detachable 4 pin connector. • Mounting Screws This 4 pinHIVE-750 connector is not a P4 or ATX12V connector. • Bag for Modular Cables Please DO force this cable in the P4 or ATX12V socket on the motherboard. +12V DCNOT OUTPUT +3.3V +5V -12V +5VSB MAX.Current 22A Combined Power 54A 22A 0.3A 3.0A POWER SUPPLY 3.6W 15W 648W 130W Total Power 750W 61 2 3 4 5 www.rosewill.com User’s Manual HIVE-550 HIVE-650 POWER SUPPLY HIVE-750 All rights reserved by Rosewill Package Content Connector Installation Easy Trouble shooting Features •Contents If your PCmake system sure the power not respond, supplyplease is not connected make following to thechecks: AC power cord. • Please ATX12V v2.31 &does EPS12V v2.92 HIVE-550 HIVE-550 HIVE-650 •1. makesure sure the theI/O ACswitch powerofcord the is PSU connected is at off firmly “O” position. and the AC power HIVE-750 switch is • Make 80PLUS BRONZE Certified • Power Supply •Full Modular Cable Set Range Active-PFC •• Install turned the on.power supply into the 1chassis. (refer to your 1chassis manual) 1 ATX 20+4 pin Features P. 2 • Eup Ready • User Manual 2x PCI-E 6+2-pin cable • Please 2. Make sure refer all to DC youroutput motherboard connectors userare manual connected to confirm in the20-pin right direction or 24-pinand main • Multi-GPU Support - 2/4 x PCI-E1 6+2-pin Connector • 1AC Power Cord 2x Four SATA cable ATX/EPS12V 4/8 pinIf 24-pin, you connector plugged firmly. it needs. can plug the 24-pin main connector onto1the • Silent 135mm Fan with Auto Speed • Cable Ties 2x Two Molex + One Floppy cableControl P. 2 Input & Ouput Rating 3. motherboard. Check whether If 20-pin, there is please any short detach circuit theproblem 4-pin to or have defective a 20-pin peripherals main connector by • Modular Cable Design • Mounting Screws 1 EPS12V 8 pin then unplugging plug it onto each the peripheral motherboard. device one at a time. • High Quality Japanese Primary Capacitor • Bag for Modular Cables Package Content P. 3and Over Current/Voltage/Temperature/Power Protection, Voltage Protection •• Please 4. If one of refer the to above your motherboard mentioned problems user manual occurs, to confirm please remove 4-pin ATX12V the fault orand 2 2Under 4 PCI-E 6+2 pin Short Circuit Protection 8-pin wait for EPS12V 1-2 minutes connector before it needs. you turnIf on 8-pin, the you PSUcan again. plug This the 8-pin is necessary EPS12Vtoconnector Connector • SATA 3-Year Warranty - One to One Replacement 8 protection 8P. 4 onto release the the motherboard. latch condition If 4-pin, of the please detachcircuit. the 4-pin8 to have a 4-pin ATX12V 5.connector If the PSUthen is still plug unable it onto to the power motherboard. upHIVE-650 after above checks, please contact with 4 4 6P. 4 Molex 4& pinOutput Rating Input Caution • Connect your dealer the PCI-E for service. connector to the VGA card if needed. Please refer to VGA card • Power Supply • Modular Cable Set manual HIVE-550 to confirm 6-pin or 8-pin2needed. 2 Floppy • 2User Manual 2x PCI-E 6+2-pin cable Installation P. 5 • Connect the SATA connector to the SATA HDD, Optical device if any. +12V OUTPUT +3.3V +5V -12V • AC Power Cord+5VSB 2x FourDC SATA cable • Connect the Molex connector devices22A such as Optical device, • Cable Ties 2x TwoMAX.Current Molex + One Floppytocable 38A 22A 0.3A 3.0A Information Easy Trouble Shooting P. 6 HDD, fan…etc. • Mounting6W Screws15W Combined Power 130W 456W Caution • Connect thefor Floppy disk connector to the floppy Rosewill drive• ifBag any.Product. Modular Cables Thank you purchasing a High-Quality Total Power 550W for Information P. 7 ••Please not store power in a high humid or to be Pleasedo connect thethe other sidesupply of the cable to the PSUtemperature according toplace, the instruction Please register product at : www.rosewill.com for complete warranty BRONZE used in PSU suchyour condition. on the information HIVE-650 and future support for your product.If you have any question while •using voltages in the Unless authorized personnel, please •High Make sure allexist the connectors fully seated. our products, please feelpower free are to supply. contact us at [email protected] +12V not open PSU cover. warranty will be void if the cover is removed. DC OUTPUT +5V -12V +5VSB HIVE-750 •do Connect thethe AC power cordThe to +3.3V the power supply. •Support Do not insert any objects into the22A open ventilation or fan grill area of the 3.0A power supply. MAX.Current 22A 0.3A Phone Number: • Turn on the power supply by800-575-9885 pushing the I/O switch46A to the “I” position. • Power Supply • Modular Cable Set •Support Please use [email protected] genuine modular cables. Third party3.6W cables might Email: Combined PowerRosewill 130W 15W not be 552W • User Manual 4x PCI-E 6+2-pin cable compatible and could cause serious damage to your system and power supply. Power 650W • AC Power Cord 2x FourTotal SATA cable The warranty will be voided with the use of third party cables. • Cable Ties 2x Three Molex + One Floppy cable • The 24 pin main power connector has a detachable 4 pin connector. • Mounting Screws This 4 pinHIVE-750 connector is not a P4 or ATX12V connector. • Bag for Modular Cables Please DO force this cable in the P4 or ATX12V socket on the motherboard. +12V DCNOT OUTPUT +3.3V +5V -12V +5VSB MAX.Current 22A Combined Power 54A 22A 0.3A 3.0A POWER SUPPLY 3.6W 15W 648W 130W Total Power 750W 61 2 3 4 5 www.rosewill.com User’s Manual HIVE-550 HIVE-650 POWER SUPPLY HIVE-750 All rights reserved by Rosewill Package Content Connector Installation Easy Trouble shooting Features •Contents If your PCmake system sure the power not respond, supplyplease is not connected make following to thechecks: AC power cord. • Please ATX12V v2.31 &does EPS12V v2.92 HIVE-550 HIVE-550 HIVE-650 •1. makesure sure the theI/O ACswitch powerofcord the is PSU connected is at off firmly “O” position. and the AC power HIVE-750 switch is • Make 80PLUS BRONZE Certified • Power Supply •Full Modular Cable Set Range Active-PFC •• Install turned the on.power supply into the 1chassis. (refer to your 1chassis manual) 1 ATX 20+4 pin Features P. 2 • Eup Ready • User Manual 2x PCI-E 6+2-pin cable • Please 2. Make sure refer all to DC youroutput motherboard connectors userare manual connected to confirm in the20-pin right direction or 24-pinand main • Multi-GPU Support - 2/4 x PCI-E1 6+2-pin Connector • 1AC Power Cord 2x Four SATA cable ATX/EPS12V 4/8 pinIf 24-pin, you connector plugged firmly. it needs. can plug the 24-pin main connector onto1the • Silent 135mm Fan with Auto Speed • Cable Ties 2x Two Molex + One Floppy cableControl P. 2 Input & Ouput Rating 3. motherboard. Check whether If 20-pin, there is please any short detach circuit theproblem 4-pin to or have defective a 20-pin peripherals main connector by • Modular Cable Design • Mounting Screws 1 EPS12V 8 pin then unplugging plug it onto each the peripheral motherboard. device one at a time. • High Quality Japanese Primary Capacitor • Bag for Modular Cables Package Content P. 3and Over Current/Voltage/Temperature/Power Protection, Voltage Protection •• Please 4. If one of refer the to above your motherboard mentioned problems user manual occurs, to confirm please remove 4-pin ATX12V the fault orand 2 2Under 4 PCI-E 6+2 pin Short Circuit Protection 8-pin wait for EPS12V 1-2 minutes connector before it needs. you turnIf on 8-pin, the you PSUcan again. plug This the 8-pin is necessary EPS12Vtoconnector Connector • SATA 3-Year Warranty - One to One Replacement 8 protection 8P. 4 onto release the the motherboard. latch condition If 4-pin, of the please detachcircuit. the 4-pin8 to have a 4-pin ATX12V 5.connector If the PSUthen is still plug unable it onto to the power motherboard. upHIVE-650 after above checks, please contact with 4 4 6P. 4 Molex 4& pinOutput Rating Input Caution • Connect your dealer the PCI-E for service. connector to the VGA card if needed. Please refer to VGA card • Power Supply • Modular Cable Set manual HIVE-550 to confirm 6-pin or 8-pin2needed. 2 Floppy • 2User Manual 2x PCI-E 6+2-pin cable Installation P. 5 • Connect the SATA connector to the SATA HDD, Optical device if any. +12V OUTPUT +3.3V +5V -12V • AC Power Cord+5VSB 2x FourDC SATA cable • Connect the Molex connector devices22A such as Optical device, • Cable Ties 2x TwoMAX.Current Molex + One Floppytocable 38A 22A 0.3A 3.0A Information Easy Trouble Shooting P. 6 HDD, fan…etc. • Mounting Screws15W Combined Power 3.6W 130W 456W Caution • Connect thefor Floppy disk connector to the floppy Rosewill drive• ifBag any.Product. Modular Cables Thank you purchasing a High-Quality Total Power 550W for Information P. 7 ••Please not store power in a high humid or to be Pleasedo connect thethe other sidesupply of the cable to the PSUtemperature according toplace, the instruction Please register product at : www.rosewill.com for complete warranty BRONZE used in PSU suchyour condition. on the information HIVE-650 and future support for your product.If you have any question while •using voltages in the Unless authorized personnel, please •High Make sure allexist the connectors fully seated. our products, please feelpower free are to supply. contact us at [email protected] +12V not open PSU cover. warranty will be void if the cover is removed. DC OUTPUT +5V -12V +5VSB HIVE-750 •do Connect thethe AC power cordThe to +3.3V the power supply. •Support Do not insert any objects into the22A open ventilation or fan grill area of the 3.0A power supply. MAX.Current 22A 0.3A Phone Number: • Turn on the power supply by800-575-9885 pushing the I/O switch46A to the “I” position. • Power Supply • Modular Cable Set •Support Please use [email protected] genuine modular cables. Third party cables 15W might not be Email: Combined PowerRosewill 130W 3.6W 552W • User Manual 4x PCI-E 6+2-pin cable compatible and could cause serious damage to your system and power supply. Power 650W • AC Power Cord 2x FourTotal SATA cable The warranty will be voided with the use of third party cables. • Cable Ties 2x Three Molex + One Floppy cable • The 24 pin main power connector has a detachable 4 pin connector. • Mounting Screws This 4 pinHIVE-750 connector is not a P4 or ATX12V connector. • Bag for Modular Cables Please DO force this cable in the P4 or ATX12V socket on the motherboard. +12V DCNOT OUTPUT +3.3V +5V -12V +5VSB MAX.Current 22A Combined Power 54A 22A 0.3A 3.0A POWER SUPPLY 3.6W 15W 648W 130W Total Power 750W 61 2 3 4 5 www.rosewill.com User’s Manual HIVE-550 HIVE-650 POWER SUPPLY HIVE-750 All rights reserved by Rosewill Package Content Connector Installation Easy Trouble shooting Features •Contents If your PCmake system sure the power not respond, supplyplease is not connected make following to thechecks: AC power cord. • Please ATX12V v2.31 &does EPS12V v2.92 HIVE-550 HIVE-550 HIVE-650 •1. makesure sure the theI/O ACswitch powerofcord the is PSU connected is at off firmly “O” position. and the AC power HIVE-750 switch is • Make 80PLUS BRONZE Certified • Power Supply •Full Modular Cable Set Range Active-PFC •• Install turned the on.power supply into the 1chassis. (refer to your 1chassis manual) 1 ATX 20+4 pin Features P. 2 • Eup Ready • User Manual 2x PCI-E 6+2-pin cable • Please 2. Make sure refer all to DC youroutput motherboard connectors userare manual connected to confirm in the20-pin right direction or 24-pinand main • Multi-GPU Support - 2/4 x PCI-E1 6+2-pin Connector • 1AC Power Cord 2x Four SATA cable ATX/EPS12V 4/8 pinIf 24-pin, you connector plugged firmly. it needs. can plug the 24-pin main connector onto1the • Silent 135mm Fan with Auto Speed • Cable Ties 2x Two Molex + One Floppy cableControl P. 2 Input & Ouput Rating 3. motherboard. Check whether If 20-pin, there is please any short detach circuit theproblem 4-pin to or have defective a 20-pin peripherals main connector by • Modular Cable Design • Mounting Screws 1 EPS12V 8 pin then unplugging plug it onto each the peripheral motherboard. device one at a time. • High Quality Japanese Primary Capacitor • Bag for Modular Cables Package Content P. 3and Over Current/Voltage/Temperature/Power Protection, Voltage Protection •• Please 4. If one of refer the to above your motherboard mentioned problems user manual occurs, to confirm please remove 4-pin ATX12V the fault orand 2 2Under 4 PCI-E 6+2 pin Short Circuit Protection 8-pin wait for EPS12V 1-2 minutes connector before it needs. you turnIf on 8-pin, the you PSUcan again. plug This the 8-pin is necessary EPS12Vtoconnector Connector • SATA 3-Year Warranty - One to One Replacement 8 protection 8P. 4 onto release the the motherboard. latch condition If 4-pin, of the please detachcircuit. the 4-pin8 to have a 4-pin ATX12V 5.connector If the PSUthen is still plug unable it onto to the power motherboard. upHIVE-650 after above checks, please contact with 4 4 6P. 4 Molex 4& pinOutput Rating Input Caution • Connect your dealer the PCI-E for service. connector to the VGA card if needed. Please refer to VGA card • Power Supply • Modular Cable Set manual HIVE-550 to confirm 6-pin or 8-pin2needed. 2 Floppy • 2User Manual 2x PCI-E 6+2-pin cable Installation P. 5 • Connect the SATA connector to the SATA HDD, Optical device if any. +12V OUTPUT +3.3V +5V -12V • AC Power Cord+5VSB 2x FourDC SATA cable • Connect the Molex connector devices22A such as Optical device, • Cable Ties 2x TwoMAX.Current Molex + One Floppytocable 38A 22A 0.3A 3.0A Information Easy Trouble Shooting P. 6 HDD, fan…etc. • Mounting6W Screws15W Combined Power 130W 456W Caution • Connect thefor Floppy disk connector to the floppy Rosewill drive• ifBag any.Product. Modular Cables Thank you purchasing a High-Quality Total Power 550W for Information P. 7 ••Please not store power in a high humid or to be Pleasedo connect thethe other sidesupply of the cable to the PSUtemperature according toplace, the instruction Please register product at : www.rosewill.com for complete warranty BRONZE used in PSU suchyour condition. on the information HIVE-650 and future support for your product.If you have any question while •using voltages in the Unless authorized personnel, please •High Make sure allexist the connectors fully seated. our products, please feelpower free are to supply. contact us at [email protected] +12V not open PSU cover. warranty will be void if the cover is removed. DC OUTPUT +5V -12V +5VSB HIVE-750 •do Connect thethe AC power cordThe to +3.3V the power supply. •Support Do not insert any objects into the22A open ventilation or fan grill area of the 3.0A power supply. MAX.Current 22A 0.3A Phone Number: • Turn on the power supply by800-575-9885 pushing the I/O switch46A to the “I” position. • Power Supply • Modular Cable Set •Support Please use [email protected] genuine modular cables. Third party3.6W cables might Email: Combined PowerRosewill 130W 15W not be 552W • User Manual 4x PCI-E 6+2-pin cable compatible and could cause serious damage to your system and power supply. Power 650W • AC Power Cord 2x FourTotal SATA cable The warranty will be voided with the use of third party cables. • Cable Ties 2x Three Molex + One Floppy cable • The 24 pin main power connector has a detachable 4 pin connector. • Mounting Screws This 4 pinHIVE-750 connector is not a P4 or ATX12V connector. • Bag for Modular Cables Please DO force this cable in the P4 or ATX12V socket on the motherboard. +12V DCNOT OUTPUT +3.3V +5V -12V +5VSB MAX.Current 22A Combined Power 54A 22A 0.3A 3.0A POWER SUPPLY 3.6W 15W 648W 130W Total Power 750W 61 2 3 4 5 www.rosewill.com User’s Manual HIVE-550 HIVE-650 POWER SUPPLY HIVE-750 All rights reserved by Rosewill Package Content Connector Installation Easy Trouble shooting Features •Contents If your PCmake system sure the power not respond, supplyplease is not connected make following to thechecks: AC power cord. • Please ATX12V v2.31 &does EPS12V v2.92 HIVE-550 HIVE-550 HIVE-650 •1. makesure sure the theI/O ACswitch powerofcord the is PSU connected is at off firmly “O” position. and the AC power HIVE-750 switch is • Make 80PLUS BRONZE Certified • Power Supply •Full Modular Cable Set Range Active-PFC •• Install turned the on.power supply into the 1chassis. (refer to your 1chassis manual) 1 ATX 20+4 pin Features P. 2 • Eup Ready • User Manual 2x PCI-E 6+2-pin cable • Please 2. Make sure refer all to DC youroutput motherboard connectors userare manual connected to confirm in the20-pin right direction or 24-pinand main • Multi-GPU Support - 2/4 x PCI-E1 6+2-pin Connector • 1AC Power Cord 2x Four SATA cable ATX/EPS12V 4/8 pinIf 24-pin, you connector plugged firmly. it needs. can plug the 24-pin main connector onto1the • Silent 135mm Fan with Auto Speed • Cable Ties 2x Two Molex + One Floppy cableControl P. 2 Input & Ouput Rating 3. motherboard. Check whether If 20-pin, there is please any short detach circuit theproblem 4-pin to or have defective a 20-pin peripherals main connector by • Modular Cable Design • Mounting Screws 1 EPS12V 8 pin then unplugging plug it onto each the peripheral motherboard. device one at a time. • High Quality Japanese Primary Capacitor • Bag for Modular Cables Package Content P. 3and Over Current/Voltage/Temperature/Power Protection, Voltage Protection •• Please 4. If one of refer the to above your motherboard mentioned problems user manual occurs, to confirm please remove 4-pin ATX12V the fault orand 2 2Under 4 PCI-E 6+2 pin Short Circuit Protection 8-pin wait for EPS12V 1-2 minutes connector before it needs. you turnIf on 8-pin, the you PSUcan again. plug This the 8-pin is necessary EPS12Vtoconnector Connector • SATA 3-Year Warranty - One to One Replacement 8 protection 8P. 4 onto release the the motherboard. latch condition If 4-pin, of the please detachcircuit. the 4-pin8 to have a 4-pin ATX12V 5.connector If the PSUthen is still plug unable it onto to the power motherboard. upHIVE-650 after above checks, please contact with 4 4 6P. 4 Molex 4& pinOutput Rating Input Caution • Connect your dealer the PCI-E for service. connector to the VGA card if needed. Please refer to VGA card • Power Supply • Modular Cable Set manual HIVE-550 to confirm 6-pin or 8-pin2needed. 2 Floppy • 2User Manual 2x PCI-E 6+2-pin cable Installation P. 5 • Connect the SATA connector to the SATA HDD, Optical device if any. +12V OUTPUT +3.3V +5V -12V • AC Power Cord+5VSB 2x FourDC SATA cable • Connect the Molex connector devices22A such as Optical device, • Cable Ties 2x TwoMAX.Current Molex + One Floppytocable 38A 22A 0.3A 3.0A Information Easy Trouble Shooting P. 6 HDD, fan…etc. • Mounting6W Screws15W Combined Power 130W 456W Caution • Connect thefor Floppy disk connector to the floppy Rosewill drive• ifBag any.Product. Modular Cables Thank you purchasing a High-Quality Total Power 550W for Information P. 7 ••Please not store power in a high humid or to be Pleasedo connect thethe other sidesupply of the cable to the PSUtemperature according toplace, the instruction Please register product at : www.rosewill.com for complete warranty BRONZE used in PSU suchyour condition. on the information HIVE-650 and future support for your product.If you have any question while •using voltages in the Unless authorized personnel, please •High Make sure allexist the connectors fully seated. our products, please feelpower free are to supply. contact us at [email protected] +12V not open PSU cover. warranty will be void if the cover is removed. DC OUTPUT +5V -12V +5VSB HIVE-750 •do Connect thethe AC power cordThe to +3.3V the power supply. •Support Do not insert any objects into the22A open ventilation or fan grill area of the 3.0A power supply. MAX.Current 22A 0.3A Phone Number: • Turn on the power supply by800-575-9885 pushing the I/O switch46A to the “I” position. • Power Supply • Modular Cable Set •Support Please use [email protected] genuine modular cables. Third party3.6W cables might Email: Combined PowerRosewill 130W 15W not be 552W • User Manual 4x PCI-E 6+2-pin cable compatible and could cause serious damage to your system and power supply. Power 650W • AC Power Cord 2x FourTotal SATA cable The warranty will be voided with the use of third party cables. • Cable Ties 2x Three Molex + One Floppy cable • The 24 pin main power connector has a detachable 4 pin connector. • Mounting Screws This 4 pinHIVE-750 connector is not a P4 or ATX12V connector. • Bag for Modular Cables Please DO force this cable in the P4 or ATX12V socket on the motherboard. +12V DCNOT OUTPUT +3.3V +5V -12V +5VSB MAX.Current 22A Combined Power 54A 22A 0.3A 3.0A POWER SUPPLY 3.6W 15W 648W 130W Total Power 750W 61 2 3 4 5 www.rosewill.com User’s Manual HIVE-550 HIVE-650 POWER SUPPLY HIVE-750 All rights reserved by Rosewill Package Content Connector Installation Easy Trouble shooting Features •Contents If your PCmake system sure the power not respond, supplyplease is not connected make following to thechecks: AC power cord. • Please ATX12V v2.31 &does EPS12V v2.92 HIVE-550 HIVE-550 HIVE-650 •1. makesure sure the theI/O ACswitch powerofcord the is PSU connected is at off firmly “O” position. and the AC power HIVE-750 switch is • Make 80PLUS BRONZE Certified • Power Supply •Full Modular Cable Set Range Active-PFC •• Install turned the on.power supply into the 1chassis. (refer to your 1chassis manual) 1 ATX 20+4 pin Features P. 2 • Eup Ready • User Manual 2x PCI-E 6+2-pin cable • Please 2. Make sure refer all to DC youroutput motherboard connectors userare manual connected to confirm in the20-pin right direction or 24-pinand main • Multi-GPU Support - 2/4 x PCI-E1 6+2-pin Connector • 1AC Power Cord 2x Four SATA cable ATX/EPS12V 4/8 pinIf 24-pin, you connector plugged firmly. it needs. can plug the 24-pin main connector onto1the • Silent 135mm Fan with Auto Speed • Cable Ties 2x Two Molex + One Floppy cableControl P. 2 Input & Ouput Rating 3. motherboard. Check whether If 20-pin, there is please any short detach circuit theproblem 4-pin to or have defective a 20-pin peripherals main connector by • Modular Cable Design • Mounting Screws 1 EPS12V 8 pin then unplugging plug it onto each the peripheral motherboard. device one at a time. • High Quality Japanese Primary Capacitor • Bag for Modular Cables Package Content P. 3and Over Current/Voltage/Temperature/Power Protection, Voltage Protection •• Please 4. If one of refer the to above your motherboard mentioned problems user manual occurs, to confirm please remove 4-pin ATX12V the fault orand 2 2Under 4 PCI-E 6+2 pin Short Circuit Protection 8-pin wait for EPS12V 1-2 minutes connector before it needs. you turnIf on 8-pin, the you PSUcan again. plug This the 8-pin is necessary EPS12Vtoconnector Connector • SATA 3-Year Warranty - One to One Replacement 8 protection 8P. 4 onto release the the motherboard. latch condition If 4-pin, of the please detachcircuit. the 4-pin8 to have a 4-pin ATX12V 5.connector If the PSUthen is still plug unable it onto to the power motherboard. upHIVE-650 after above checks, please contact with 4 4 6P. 4 Molex 4& pinOutput Rating Input Caution • Connect your dealer the PCI-E for service. connector to the VGA card if needed. Please refer to VGA card • Power Supply • Modular Cable Set manual HIVE-550 to confirm 6-pin or 8-pin2needed. 2 Floppy • 2User Manual 2x PCI-E 6+2-pin cable Installation P. 5 • Connect the SATA connector to the SATA HDD, Optical device if any. +12V OUTPUT +3.3V +5V -12V • AC Power Cord+5VSB 2x FourDC SATA cable • Connect the Molex connector devices22A such as Optical device, • Cable Ties 2x TwoMAX.Current Molex + One Floppytocable 38A 22A 0.3A 3.0A Information Easy Trouble Shooting P. 6 HDD, fan…etc. • Mounting6W Screws15W Combined Power 130W 456W Caution • Connect thefor Floppy disk connector to the floppy Rosewill drive• ifBag any.Product. Modular Cables Thank you purchasing a High-Quality Total Power 550W for Information P. 7 ••Please not store power in a high humid or to be Pleasedo connect thethe other sidesupply of the cable to the PSUtemperature according toplace, the instruction Please register product at : www.rosewill.com for complete warranty BRONZE used in PSU suchyour condition. on the information HIVE-650 and future support for your product.If you have any question while •using voltages in the Unless authorized personnel, please •High Make sure allexist the connectors fully seated. our products, please feelpower free are to supply. contact us at [email protected] +12V not open PSU cover. warranty will be void if the cover is removed. DC OUTPUT +5V -12V +5VSB HIVE-750 •do Connect thethe AC power cordThe to +3.3V the power supply. •Support Do not insert any objects into the22A open ventilation or fan grill area of the 3.0A power supply. MAX.Current 22A 0.3A Phone Number: • Turn on the power supply by800-575-9885 pushing the I/O switch46A to the “I” position. • Power Supply • Modular Cable Set •Support Please use [email protected] genuine modular cables. Third party3.6W cables might Email: Combined PowerRosewill 130W 15W not be 552W • User Manual 4x PCI-E 6+2-pin cable compatible and could cause serious damage to your system and power supply. Power 650W • AC Power Cord 2x FourTotal SATA cable The warranty will be voided with the use of third party cables. • Cable Ties 2x Three Molex + One Floppy cable • The 24 pin main power connector has a detachable 4 pin connector. • Mounting Screws This 4 pinHIVE-750 connector is not a P4 or ATX12V connector. • Bag for Modular Cables Please DO force this cable in the P4 or ATX12V socket on the motherboard. +12V DCNOT OUTPUT +3.3V +5V -12V +5VSB MAX.Current 22A Combined Power 54A 22A 0.3A 3.0A POWER SUPPLY 3.6W 15W 648W 130W Total Power 750W 61 2 3 4 5 www.rosewill.com User’s Manual HIVE-550 HIVE-650 POWER SUPPLY HIVE-750 All rights reserved by Rosewill Package Content Connector Installation Easy Trouble shooting Features •Contents If your PCmake system sure the power not respond, supplyplease is not connected make following to thechecks: AC power cord. • Please ATX12V v2.31 &does EPS12V v2.92 HIVE-550 HIVE-550 HIVE-650 •1. makesure sure the theI/O ACswitch powerofcord the is PSU connected is at off firmly “O” position. and the AC power HIVE-750 switch is • Make 80PLUS BRONZE Certified • Power Supply •Full Modular Cable Set Range Active-PFC •• Install turned the on.power supply into the 1chassis. (refer to your 1chassis manual) 1 ATX 20+4 pin Features P. 2 • Eup Ready • User Manual 2x PCI-E 6+2-pin cable • Please 2. Make sure refer all to DC youroutput motherboard connectors userare manual connected to confirm in the20-pin right direction or 24-pinand main • Multi-GPU Support - 2/4 x PCI-E1 6+2-pin Connector • 1AC Power Cord 2x Four SATA cable ATX/EPS12V 4/8 pinIf 24-pin, you connector plugged firmly. it needs. can plug the 24-pin main connector onto1the • Silent 135mm Fan with Auto Speed • Cable Ties 2x Two Molex + One Floppy cableControl P. 2 Input & Ouput Rating 3. motherboard. Check whether If 20-pin, there is please any short detach circuit theproblem 4-pin to or have defective a 20-pin peripherals main connector by • Modular Cable Design • Mounting Screws 1 EPS12V 8 pin then unplugging plug it onto each the peripheral motherboard. device one at a time. • High Quality Japanese Primary Capacitor • Bag for Modular Cables Package Content P. 3and Over Current/Voltage/Temperature/Power Protection, Voltage Protection •• Please 4. If one of refer the to above your motherboard mentioned problems user manual occurs, to confirm please remove 4-pin ATX12V the fault orand 2 2Under 4 PCI-E 6+2 pin Short Circuit Protection 8-pin wait for EPS12V 1-2 minutes connector before it needs. you turnIf on 8-pin, the you PSUcan again. plug This the 8-pin is necessary EPS12Vtoconnector Connector • SATA 3-Year Warranty - One to One Replacement 8 protection 8P. 4 onto release the the motherboard. latch condition If 4-pin, of the please detachcircuit. the 4-pin8 to have a 4-pin ATX12V 5.connector If the PSUthen is still plug unable it onto to the power motherboard. upHIVE-650 after above checks, please contact with 4 4 6P. 4 Molex 4& pinOutput Rating Input Caution • Connect your dealer the PCI-E for service. connector to the VGA card if needed. Please refer to VGA card • Power Supply • Modular Cable Set manual HIVE-550 to confirm 6-pin or 8-pin2needed. 2 Floppy • 2User Manual 2x PCI-E 6+2-pin cable Installation P. 5 • Connect the SATA connector to the SATA HDD, Optical device if any. +12V OUTPUT +3.3V +5V -12V • AC Power Cord+5VSB 2x FourDC SATA cable • Connect the Molex connector devices22A such as Optical device, • Cable Ties 2x TwoMAX.Current Molex + One Floppytocable 38A 22A 0.3A 3.0A Information Easy Trouble Shooting P. 6 HDD, fan…etc. • Mounting6W Screws15W Combined Power 130W 456W Caution • Connect thefor Floppy disk connector to the floppy Rosewill drive• ifBag any.Product. Modular Cables Thank you purchasing a High-Quality Total Power 550W for Information P. 7 ••Please not store power in a high humid or to be Pleasedo connect thethe other sidesupply of the cable to the PSUtemperature according toplace, the instruction Please register product at : www.rosewill.com for complete warranty BRONZE used in PSU suchyour condition. on the information HIVE-650 and future support for your product.If you have any question while •using voltages in the Unless authorized personnel, please •High Make sure allexist the connectors fully seated. our products, please feelpower free are to supply. contact us at [email protected] +12V not open PSU cover. warranty will be void if the cover is removed. DC OUTPUT +5V -12V +5VSB HIVE-750 •do Connect thethe AC power cordThe to +3.3V the power supply. •Support Do not insert any objects into the22A open ventilation or fan grill area of the 3.0A power supply. MAX.Current 22A 0.3A Phone Number: • Turn on the power supply by800-575-9885 pushing the I/O switch46A to the “I” position. • Power Supply • Modular Cable Set •Support Please use [email protected] genuine modular cables. Third party3.6W cables might Email: Combined PowerRosewill 130W 15W not be 552W • User Manual 4x PCI-E 6+2-pin cable compatible and could cause serious damage to your system and power supply. Power 650W • AC Power Cord 2x FourTotal SATA cable The warranty will be voided with the use of third party cables. • Cable Ties 2x Three Molex + One Floppy cable • The 24 pin main power connector has a detachable 4 pin connector. • Mounting Screws This 4 pinHIVE-750 connector is not a P4 or ATX12V connector. • Bag for Modular Cables Please DO force this cable in the P4 or ATX12V socket on the motherboard. +12V DCNOT OUTPUT +3.3V +5V -12V +5VSB MAX.Current 22A Combined Power 54A 22A 0.3A 3.0A POWER SUPPLY 3.6W 15W 648W 130W Total Power 750W 61 2 3 4 5 www.rosewill.com User’s Manual HIVE-550 HIVE-650 POWER SUPPLY HIVE-750 All rights reserved by Rosewill Package Content Connector Installation Easy Trouble shooting Features •Contents If your PCmake system sure the power not respond, supplyplease is not connected make following to thechecks: AC power cord. • Please ATX12V v2.31 &does EPS12V v2.92 HIVE-550 HIVE-550 HIVE-650 •1. makesure sure the theI/O ACswitch powerofcord the is PSU connected is at off firmly “O” position. and the AC power HIVE-750 switch is • Make 80PLUS BRONZE Certified • Power Supply •Full Modular Cable Set Range Active-PFC •• Install turned the on.power supply into the 1chassis. (refer to your 1chassis manual) 1 ATX 20+4 pin Features P. 2 • Eup Ready • User Manual 2x PCI-E 6+2-pin cable • Please 2. Make sure refer all to DC youroutput motherboard connectors userare manual connected to confirm in the20-pin right direction or 24-pinand main • Multi-GPU Support - 2/4 x PCI-E1 6+2-pin Connector • 1AC Power Cord 2x Four SATA cable ATX/EPS12V 4/8 pinIf 24-pin, you connector plugged firmly. it needs. can plug the 24-pin main connector onto1the • Silent 135mm Fan with Auto Speed • Cable Ties 2x Two Molex + One Floppy cableControl P. 2 Input & Ouput Rating 3. motherboard. Check whether If 20-pin, there is please any short detach circuit theproblem 4-pin to or have defective a 20-pin peripherals main connector by • Modular Cable Design • Mounting Screws 1 EPS12V 8 pin then unplugging plug it onto each the peripheral motherboard. device one at a time. • High Quality Japanese Primary Capacitor • Bag for Modular Cables Package Content P. 3and Over Current/Voltage/Temperature/Power Protection, Voltage Protection •• Please 4. If one of refer the to above your motherboard mentioned problems user manual occurs, to confirm please remove 4-pin ATX12V the fault orand 2 2Under 4 PCI-E 6+2 pin Short Circuit Protection 8-pin wait for EPS12V 1-2 minutes connector before it needs. you turnIf on 8-pin, the you PSUcan again. plug This the 8-pin is necessary EPS12Vtoconnector Connector • SATA 3-Year Warranty - One to One Replacement 8 protection 8P. 4 onto release the the motherboard. latch condition If 4-pin, of the please detachcircuit. the 4-pin8 to have a 4-pin ATX12V 5.connector If the PSUthen is still plug unable it onto to the power motherboard. upHIVE-650 after above checks, please contact with 4 4 6P. 4 Molex 4& pinOutput Rating Input Caution • Connect your dealer the PCI-E for service. connector to the VGA card if needed. Please refer to VGA card • Power Supply • Modular Cable Set manual HIVE-550 to confirm 6-pin or 8-pin2needed. 2 Floppy • 2User Manual 2x PCI-E 6+2-pin cable Installation P. 5 • Connect the SATA connector to the SATA HDD, Optical device if any. +12V OUTPUT +3.3V +5V -12V • AC Power Cord+5VSB 2x FourDC SATA cable • Connect the Molex connector devices22A such as Optical device, • Cable Ties 2x TwoMAX.Current Molex + One Floppytocable 38A 22A 0.3A 3.0A Information Easy Trouble Shooting P. 6 HDD, fan…etc. • Mounting Screws15W Combined Power 3.6W 130W 456W Caution • Connect thefor Floppy disk connector to the floppy Rosewill drive• ifBag any.Product. Modular Cables Thank you purchasing a High-Quality Total Power 550W for Information P. 7 ••Please not store power in a high humid or to be Pleasedo connect thethe other sidesupply of the cable to the PSUtemperature according toplace, the instruction Please register product at : www.rosewill.com for complete warranty BRONZE used in PSU suchyour condition. on the information HIVE-650 and future support for your product.If you have any question while •using voltages in the Unless authorized personnel, please •High Make sure allexist the connectors fully seated. our products, please feelpower free are to supply. contact us at [email protected] +12V not open PSU cover. warranty will be void if the cover is removed. DC OUTPUT +5V -12V +5VSB HIVE-750 •do Connect thethe AC power cordThe to +3.3V the power supply. •Support Do not insert any objects into the22A open ventilation or fan grill area of the 3.0A power supply. MAX.Current 22A 0.3A Phone Number: • Turn on the power supply by800-575-9885 pushing the I/O switch46A to the “I” position. • Power Supply • Modular Cable Set •Support Please use [email protected] genuine modular cables. Third party cables 15W might not be Email: Combined PowerRosewill 130W 3.6W 552W • User Manual 4x PCI-E 6+2-pin cable compatible and could cause serious damage to your system and power supply. Power 650W • AC Power Cord 2x FourTotal SATA cable The warranty will be voided with the use of third party cables. • Cable Ties 2x Three Molex + One Floppy cable • The 24 pin main power connector has a detachable 4 pin connector. • Mounting Screws This 4 pinHIVE-750 connector is not a P4 or ATX12V connector. • Bag for Modular Cables Please DO force this cable in the P4 or ATX12V socket on the motherboard. +12V DCNOT OUTPUT +3.3V +5V -12V +5VSB MAX.Current 22A Combined Power 54A 22A 0.3A 3.0A POWER SUPPLY 3.6W 15W 648W 130W Total Power 750W 61 2 3 4 5 www.rosewill.com User’s Manual HIVE-550 HIVE-650 POWER SUPPLY HIVE-750 All rights reserved by Rosewill ">

Public link updated
The public link to your chat has been updated.
Advertisement