Optoma TX565UT Specification

Projector Expert

TX565UT-3D

− Ultra Short Throw Projector

Datasheet

– TX565UT-3D

Bring Presentations and Lessons to Life

Optoma’s TX565UT-3D brings together high brightness and contrast with 3D capabilities to allow presenters and educators to deliver sharp, crystal-clear images and bring content to life. Sophisticated optics technology allows the projector to be placed above and just inches from a whiteboard, screen or wall to reduce on-screen shadows and eye glare. Meanwhile, the sleek and sophisticated design provides streamlined installation.

Features

 Ultra short throw design minimizes shadows

 3D-capable via DLP® Link™ technology – Up to 720p resolution**

 Natively-embedded Crestron RoomView® delivers built-in connectivity and control

 Powerful audio – Built-in 10-Watt speaker system

 Environmentally-friendly design uses less than 0.5 watt of power in standby mode

Specifications

Display Technology

Single 0.55" DC3 DMD DLP by

Texas Instruments

Native Resolution

XGA (1024x768)

Maximum Resolution

UXGA (1600 x 1200)

Brightness (Typical)

2500 ANSI Lumens

Contrast Ratio

3000:1 (Full On/Full Off)

Lamp Life and Type*

4000/3000 Hours (STD/Bright)

230W P-VIP

Throw Ratio

0.38 (Distance/Width)

Projection Distance

18.5” to 25.8“ From Projector Mirror to Screen

Image Size (Diagonal)

63” to 85” (1.96m to 2.16m)

Aspect Ratio

4:3 Native, 16:9 Compatible

Offset

128%

Displayable Colors

1.07 Billion

Uniformity

85%

Audio

Two 5-Watt Speakers

Variable Audio Out

HDMI Audio Pass-Thru

Noise Level (STD/BRIGHT)

30dB/32dB

Remote Control

IR Remote with Mouse Control

Computer Compatibility

UXGA, WXGA, SXGA+, SXGA, XGA, SVGA,

VGA Resized, VESA, PC and Macintosh

Compatible

Video Compatibility

NTSC, PAL, SECAM, SDTV (480i), EDTV

(480p), HDTV (720p, 1080i/p)

3D Compatibility**

120Hz Frame Sequential 3D for

Resolutions Up to 720p, 60Hz Field

Sequential 3D for Resolutions Up to 480i

Monitor Loop Through

D-Sub 15 pin VGA Output (Functional in

Both Normal and Standby Modes)

Projection Lens

F=2.71, f=4.423mm, Manual Focus

Digital Zoom=0.8~2.0

Closed Captioning

Enabled Via On-Screen Menu

User Controls

Complete On-Screen Menu Adjustments in

26 Languages

I/O Connectors

HDMI v1.3, Two VGA-In, VGA-Out,

S-Video, Composite Video, RCA Stereo

Audio-In, Stereo Audio-In, Stereo

Audio-Out, Microphone-In, 12v Trigger,

RJ45 and RS-232

Security

Kensington® Lock Port, Security Bar and

Keypad Lock

Projection Method

Front, Front Ceiling, Rear, Rear Ceiling

Weight

16.76 lbs (7.6kg)

Dimensions (W x H x D)

16.8” x 8.27” x 16”

(426.5 x 210 x 407 mm)

Horizontal Scan Rate

15.3, 30 - 91.1 KHz

Vertical Refresh Rate

24 – 85, 120 Hz

Operating Temperature

41 to 104°F (5 to 40°C), 85% Max Humidity

Power Supply

AC Input 100-240V, 50-60Hz,

Auto-Switching

Power Consumption

330 Watts (Bright), 255 Watts (STD), 14

Watts (Active Standby), <0.5 Watt

(Standby)

Standard Accessories

AC Power Cord, VGA to VGA Cable,

Remote Control, Batteries for Remote,

Multilingual CD-ROM User’s Manual, Quick

Start Card and Warranty Card

Optional Accessories

HDMI Cable, Microphone, Component to

VGA Cable, Composite Video Cable,

RS-232 Cable and Panoview™ Series

Screens, DLPLink 3D glasses, 3D scaler box

Warranty

3-Year Optoma Express Replacement

Service, 1-Year Lamp

UPC

796435 41 750 5

* Lamp life is dependent upon many factors, including lamp mode, display mode, usage, environmental conditions and more. Lamp brightness may decrease over time.

**3D content can be viewed with active LCD shutter glasses when the projector is connected to a computer with a compatible 3D graphics card.

www.

optomausa

.com

© Copyright 2012 Optoma Technology, Inc. DLP ® and the DLP logo are registered trademarks of Texas Instruments. All other trademarks are the property of their

respective owners. All specifications subject to change at any time. The Optoma Express Program is only valid in the U.S.