Mfg. No: 8892-0
580.328350, 5,000 Watt Craftsman
Copyright © Briggs & Stratton. All Rights reserved
23-Jul-2021
Control Panel No. 68872-A. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Generator No. 68871-A. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Mounting Base No. 68873-A. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
8
Wiring Diagram & Schematic No. 68729. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
12
4
6
Torque Specification Chart. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
14 or
Not F
Reproduction
Copyright © Briggs & Stratton. All Rights reserved
3 23-Jul-2021
Note: Unless noted otherwise, use the standard torque specifications Mfg. No: 8892-0 or
Not F
Reproduction
Copyright © Briggs & Stratton. All Rights reserved
4 23-Jul-2021
14
15
16
17
10
11
12
13
8
9
6
7
4
5
1
3
26
27
28
18
19
20
25
QTY DESCRIPTION
68866E
66817
66819
68759
60824
68868
68867
36917
23365
22264
A/R
A/R
A/R
A/R
A/R
A/R
A/R
A/R
A/R
A/R
PANEL, Receptacle (Silkscreened)
-Contact Generac for quantity required
SWITCH, Engine and LAMP, Power Indicator
-Contact Generac for quantity required
BREAKER, Circuit- 20 ampere
-Contact Generac for quantity required
RECEPTACLE - 120 volts, 20 amp DUPLEX
-Contact Generac for quantity required
BREAKER, Circuit - 30 amp
-Contact Generac for quantity required
RECEPTACLE - 120 volts, 30 amp
-Contact Generac for quantity required
RECEPTACLE - 120/240 volts, 20 amp
-Contact Generac for quantity required
SCREW - No. 8-32 x 3/8"
-Contact Generac for quantity required
WASHER, Serrated - No. 8
-Contact Generac for quantity required
WASHER, Lock - No. 8
-Contact Generac for quantity required
22471
69254
63036
68746
A/R NUT, Hex - No. 8-32
-Contact Generac for quantity required
A/R SCREW (Crimptite) - 1/4"-20 x 1/2"
A/R
A/R or -Contact Generac for quantity required
SCREW (Crimptite) - No. 8-18 x 1/4"
-Contact Generac for quantity required
PANEL, Back
-Contact Generac for quantity required
67107 A/R REGULATOR, Voltage
-Contact Generac for quantity required
A/R BRACKET, Holddown
-Contact Generac for quantity required
68795 A/R BRACKET, Regulator Reproduction
65511 A/R BUTTON, Plug - 1/2"
-Contact Generac for quantity required
36261 A/R
65795
22158
22152
36935
68799
37806
43483
A/R
A/R
A/R
A/R
A/R
A/R
A/R
RIVET, Pop - 1/8"
-Contact Generac for quantity required
RECTIFIER, Battery Charge
-Contact Generac for quantity required
NUT, Hex - No. 10-32
-Contact Generac for quantity required
WASHER, Lock - No. 10
-Contact Generac for quantity required
SCREW - No. 10-32 x 3/4"
-Contact Generac for quantity required
COVER, Connector Plug
-Contact Generac for quantity required
PLUG, Connector- 120 volts, 30 ampere
-(For use with Item 7) Contact Generac for quantity required
PLUG, Connector- 120/240 volts, 20 ampere
-(For use with Item 8) Contact Generac for quantity required
NOT SHOWN
Not Shown
Copyright © Briggs & Stratton. All Rights reserved
5 23-Jul-2021
Note: Unless noted otherwise, use the standard torque specifications Mfg. No: 8892-0 or
Not F
Reproduction
Copyright © Briggs & Stratton. All Rights reserved
6 23-Jul-2021
19
21
22
23
15
16
17
18
24
25
26
27
7
9
5
6
3
4
1
2
QTY DESCRIPTION
43873
22097
22129
44392B
24489
68749C
44338
44395B
23152
22237
A/R
A/R
A/R
A/R
A/R
A/R
A/R
A/R
A/R
A/R
HOUSING, Engine Adapter
-Contact Generac for quantity required
WASHER, Lock - 1/4"
-Contact Generac for quantity required
WASHER, Lock - 5/16"
-Contact Generac for quantity required
SUPPORT, Rear Generator
-Contact Generac for quantity required
SCREW (Taptite)- No. 10-32 x 3/8"
-Contact Generac for quantity required
STATOR ASSEMBLY
-Contact Generac for quantity required
BAR, Stator Bolt
-Contact Generac for quantity required
BOLT, Stator
-Contact Generac for quantity required
SCREW- 3/8"-16 x 3/4"
-Contact Generac for quantity required
WASHER, Lock - 3/8"
-Contact Generac for quantity required
68748A
24049
44943
A24044A
23877D A/R HOLDER, Brush
-Contact Generac for quantity required
A/R SCREW (Sims) - No. 6-32 x 1/4"
-Contact Generac for quantity required
25254 A/R BOLT, Rotor Reproduction
50190 A/R WASHER, Fan Retaining
-Contact Generac for quantity required
44357
44331
A/R ROTOR ASSEMBLY
-Contact Generac for quantity required
A/R BEARING, Rotor
A/R
A/R or -Contact Generac for quantity required
CARRIER, Bearing
-Contact Generac for quantity required
BRUSH
-Contact Generac for quantity required
A/R
A/R
COVER, Fan
-Contact Generac for quantity required
FAN, Cooling
-Contact Generac for quantity required
Not Shown
Copyright © Briggs & Stratton. All Rights reserved
7 23-Jul-2021
Note: Unless noted otherwise, use the standard torque specifications Mfg. No: 8892-0 or
Not F
Reproduction
Copyright © Briggs & Stratton. All Rights reserved
8 23-Jul-2021
23
24
25
26
29
30
19
20
21
22
14C
15
16
17
13A
13B
14A
14B
9
10
11
12
7
8
5
6
3
4
1
2
66391B
52749
36933
22152
48031C
48013B
68736
68861
68339C
68340
68890A
68890
66431
64680B
66802A
24489
25433
44392B
22142
67210A
68876
47662AA
69254
66831
66450
44624
22129
22128
68893
Copyright © Briggs & Stratton. All Rights reserved
QTY DESCRIPTION
A/R
A/R
A/R
A/R
A/R
A/R
A/R
A/R
A/R
A/R
ENGINE- Briggs & Stratton 252415-0742-01
-Contact Generac for quantity required
BASE, Mounting- w/Battery Tray
-Contact Generac for quantity required
LOOP, Cradle End
-Contact Generac for quantity required
SUPPORT, Fuel Tank - Right
-Contact Generac for quantity required
SUPPORT, Fuel Tank - Left
-Contact Generac for quantity required
TANK, Fuel - 4.5 Gallons (17.0 Liters)
-Contact Generac for quantity required
COVER, Spark Plug Access
-Contact Generac for quantity required
CAP, Fuel Tank
-Contact Generac for quantity required
GAUGE, Fuel Level
-Contact Generac for quantity required
SCREW - M5-0.80 x 12mm
-Contact Generac for quantity required
A/R SCREW - No. 10-32 x 3/8"
-Contact Generac for quantity required
A/R WASHER, Lock - No. 10
A/R
-Contact Generac for quantity required or Reproduction
A/R CLAMP, Fuel Hose - 3/16"
-Contact Generac for quantity required
A/R
A/R
A/R
A/R
A/R
A/R
A/R
A/R
A/R
A/R
A/R
A/R
A/R
A/R
A/R
A/R
HOSE, Fuel - 3" long x 3/16" Diameter
-Contact Generac for quantity required
HOSE, Fuel - 3" long x 1/4" Diameter
-Contact Generac for quantity required
HOSE, Fuel - 14" long x 1/4" Diameter
-Contact Generac for quantity required
SCREW (Crimptite) - 1/4"-20 x 1/2"
-Contact Generac for quantity required
RIVET - 4mm
-Contact Generac for quantity required
HANDLE - Plastic
-Contact Generac for quantity required
MOUNT, Vibration
-Contact Generac for quantity required
WASHER, Lock - 5/16"
-Contact Generac for quantity required
SCREW - 5/16"-18 x 1-1/4"
-Contact Generac for quantity required
ADAPTER, Fuel Hose - 1/4" to 3/16"
-Contact Generac for quantity required
SCREW (taptite) - No. 10-32 x 3/8"
-Contact Generac for quantity required
LUG, Grounding
-Contact Generac for quantity required
SUPPORT, Rear Generator
-Contact Generac for quantity required
SCREW - 5/16"-18 x 3/4"
-Contact Generac for quantity required
DECAL - Ground
-Contact Generac for quantity required
DECAL - Fuel Caution
-Contact Generac for quantity required
9 23-Jul-2021
Note: Unless noted otherwise, use the standard torque specifications Mfg. No: 8892-0 or
Not F
Reproduction
Copyright © Briggs & Stratton. All Rights reserved
10 23-Jul-2021
38
39
40
41
42
31
35
36
37
68740
45000
44951
27529
53030
65121
22287
22097
22127
68870A
QTY DESCRIPTION
A/R
A/R
A/R
A/R
A/R
A/R
A/R
A/R
A/R
A/R
FILTER, Fuel
-Contact Generac for quantity required
SCREW - 1/4"-20 x 7" long
-Contact Generac for quantity required
BRACKET, Battery Retaining
-Contact Generac for quantity required
NUT, Hex (Nylok) - 1/4"-20
-Contact Generac for quantity required
CONTACTOR, Starter
-Contact Generac for quantity required
BRACKET, Starter Contactor
-Contact Generac for quantity required
SCREW - 1/4"-20 x 3/4"
-Contact Generac for quantity required
WASHER, Lock - 1/4"
-Contact Generac for quantity required
NUT, Hex - 1/4"-20
-Contact Generac for quantity required
MANUAL, Owner's
-Contact Generac for quantity required
Not F or Reproduction
Copyright © Briggs & Stratton. All Rights reserved
11 23-Jul-2021
Note: Unless noted otherwise, use the standard torque specifications Mfg. No: 8892-0 or
Not F
Reproduction
Copyright © Briggs & Stratton. All Rights reserved
12 23-Jul-2021
--
--
-----
-----
QTY DESCRIPTION
Wiring Diagram/Schematic only
WARNING - Generator Voltage Could Cause Electrical Shock or Burn Resulting in Death Or Serious Injury. To Avoid Electrical Shock Or Burn Hazard, Please
Refer Service To Qualified Personnel.
Not F or Reproduction
Copyright © Briggs & Stratton. All Rights reserved
13 23-Jul-2021
Hardware Identification & Torque Specifications
Torque Specification Chart
FOR STANDARD METRIC MACHINE HARDWARE (Tolerance ± 20%)
Torque Specification Chart
FOR STANDARD MACHINE HARDWARE (Tolerance ± 20%)
0
Property
Class
5.6
8.8
10.9
12.9
Class 5.6
Class 8.8
Class 10.9
Class 12.9
Size Of
Hardware in/lbs ft/lbs Nm.
in/lbs ft/lbs Nm.
in/lbs ft/lbs Nm.
in/lbs ft/lbs Nm.
M12
M14
M16
M18
M20
M22
M24
M27
M3
M4
M5
M6
M7
M8
M10
M30
M33
M36
M39
5.88
.56
13.44
1.28
26.4
2.50
44.64
4.3
5.2
7.1
7.7
10.5
15
26
21
36
42 58
64 88
89 121
126 171
169 230
217 295
320 435
435 590
590 800
759 1030
988 1340
13.44
30.72
60.96
7.3
12.1
17.7
35
61
101
147
202
290
390
497
733
995
1349
1740
2249
1.28
2.90
5.75
9.9
16.5
24
48
83
132
200
275
390
530
375
995
1350
1830
2360
3050
1032
1401
1902
2441
3163
287
405
559
708
19.2
43.44
5.97
10.3
16.9
25
50
86.2
136
210
550
745
960
1400
117
185
285
390
1.80
4.10
8.10
14
23
34
67
1900
2580
3310
4290
22.92
2.15
52.56
4.95
7.15
9.7
12.1
16.5
19.9
29
59
27
40
81
103 140
162 220
250 340
346 470
486 660
656 890
840 1140
1239 1680
1681 2280
2278 3090
2935 3980
3798 5150
The guides and ruler furnished below are designed to help you select the appropriate hardware.
10 20 30 40 50 60 70 80 90 100
Nut, M8
Body
Diameter
Body Length
Screw, M8- 1.25 x 25
0
Thread
Diameter (mm)
Inside
Diameter (in)
Threads per inch
1/4
Nut, 1/2-16
1/2
3/4
1
1/4
Thread
Diameter (mm)
Body
Diameter
1/2
3/4
Distance between threads (mm)
Threads per inch
Body
Length (mm)
Body
Length (in)
2
Screw, 1/2- 16 x 2
1/4
1/2
3/4
3
1/4
1/2
3/4
4
Hardware
Grade
No
Marks
SAE Grade 2
Size Of in/lbs
Hardware ft/lbs Nm.
SAE Grade 5 in/lbs ft/lbs Nm.
SAE Grade 8 in/lbs ft/lbs Nm.
8-32
8-36
10-24
10-32
1/4-20
1/4-28
5/16-18
5/16-24
3/8-16
3/8-24
7/16-14
7/16-20
1/2-13
1/2-20
9/16-12
9/16-18
5/8-11
5/8-18
3/4-10
3/4-16
7/8-9
7/8-14
1-8
1-12
19
20
27
31
66
76
140
7.6
8.6
11 15.0
12
20
23
30
35
50
55
65
75
90
100
160 217.6
180 244.8
155
220
240
2.1
2.3
3.1
3.5
16.3
27.2
31.3
40.8
47.6
68.0
74.8
88.4
102.0
122.4
136
190.4
210.8
299.2
326.4
30
31
43
49
8
19
30
35
50
55
75
90
110
3.4
3.5
4.9
5.5
10.9
10 13.6
17 23.1
25.8
40.8
47.6
68.0
74.8
102.0
122.4
149.6
41
43
60
68
12
14
25
29
45
50
70
34.0
61.2
68.0
95.2
80 108.8
110 149.6
120 163.2
150 204.0
4.6
4.9
6.8
7.7
16.3
19.0
34.0
120 163.2
150 204.0
180 244.8
260 353.6
300 408.0
170
220
240
231.2
299.2
326.4
386 525.0
420 571.2
400 544.0
440 598.4
600 816.0
660 897.6
580 788.8
900 1,244.0
640 870.4
1,000 1,360.0
NOTES
1. These torque values are to be used for all hardware excluding: locknuts, self-tapping screws, thread forming screws, sheet metal screws and socket head setscrews.
2. Recommended seating torque values for locknuts: a. for prevailing torque locknuts - use 65% of grade 5 torques.
b. for flange whizlock nuts and screws - use 135% of grade 5 torques.
3. Unless otherwise noted on assembly drawings, all torque values must meet this specification.
Common Hardware Types
Hex Head Capscrew
Washer
Standard Hardware Sizing
When a washer or nut is identified as 1/2” (M8), this is the Nominal size , meaning the inside diameter is 1/2 inch
(8mm metric thread diameter); if a second number is present it represents the threads per inch (distance between threads).
When bolt or capscrew is identified as 1/2 - 16 x 2” (M8 - 1.25 x 50), this means the Nominal size , or body diameter is 1/2 inch (8mm metric thread diameter), the second number,16, represents the threads per inch, (distance between threads). The final number is the body length of the bolt or screw, 2 inches (50mm).
Carriage Bolt
Wrench & Fastener Size Guide
Lockwasher
Hex Nut
1/4” Bolt or Nut
Wrench—7/16”
M6 Bolt or Nut
Wrench—10mm
5/16” Bolt or Nut
Wrench—1/2”
M8 Bolt or Nut
Wrench—13mm
3/8” Bolt or Nut
Wrench—9/16”
M10 Bolt or Nut
Wrench—17mm
7/16” Bolt or Nut
Wrench (Bolt)—5/8”
Wrench (Nut)—11/16”
1/2” Bolt or Nut
Wrench—3/4”
M12 Bolt or Nut
Wrench—19mm
M14 Bolt or Nut
Wrench—22 mm
Copyright © Briggs & Stratton. All Rights reserved
23-Jul-2021
