Philips 220-230-240V, 380-400-415V User Manual

HID Lamps and Gear

3.2

OEM Catalogue 2009/2010

HID Lamps

HID Lamps

Today, outdoor lighting is expected to do much more than simply enable us to see at night. Lighting has also become an essential tool that is widely used to create a more welcoming environment. Outdoor lighting, therefore now has both functional and decorative roles to play. In addition, the wide choice of lamps available means that there are many outdoor lighting solutions for each application area.

The best choice will depend on your needs, which can be cost of ownership, ambience or environment. Our lamps aim to meet some or all of these values. It provides a reference guide to the light properties of the full range of Philips lamps for outdoor lighting, and also indicates the application areas for which their benefits are most applicable.

Road and tunnel lighting

Improves traffic safety for everyone on the road, and at the same time provides guidance and orientation.. Here, the requirement is for lighting that is both functional and economical, combining optimum safety with the lowest costs of ownership. Lamps must have good lighting performance and energy efficiency, and every lamp must have a long lifetime. Reliability is essential, as traffic congestion during spot replacement of premature failures can be very expensive.

The recommended HID families that anticipate upon these lamp specifications are

MASTER SON PIA, MASTER SOX and Ceramic Metal Halide.

Urban lighting

Covers streets, parks and squares, shopping and leisure areas in city centers and can serve a decorative as well as an amenity role. In addition to safety and orientation, it is capable of providing comfort, ambience, identity and even spectacle, helping to create a new and beautiful nightscape for residents and visitors alike. The primary requirement is good light quality, expressed by the color rendering index and color temperature of the lamp. The choice of lighting for residential areas, once made solely on functional criteria, is increasingly influenced by a perceived need for improved amenity, and improved vision for safety. As a result, high-quality white light is now making an appearance. Because traffic speeds are relatively low, security and comfort for pedestrians and cyclists are as important a requirement as road lighting for motorised traffic.

The ultimate HID choice is MASTER Cosmo White & MASTER City White, next to MASTER SON PIA in case functional requirements prevail.

OEM Catalogue 2009/2010 3.3

3.4


Urban architectural lighting of buildings, bridges, statues and gardens can also help to create a nightscape even more striking than the same area as seen by day.

Today’s architectural lighting does not necessarily involve high light levels but models architectural features with color and shade. High light quality and even colored right sources are appropriate in this application.

Compact HID lamps (Master Colour CDM & CDM Elite) next to Master SON &

Master HPI are most suitable for this application area.

Sports lighting

Increases revenue by extending the activities of a sports club into the hours of darkness.

Special care is needed with lighting design to avoid light entering players’ eyes directly, wherever they may be in the playing area, and also to avoid light pollution in residential areas. In local recreational facilities and small clubs, the requirements are for functional lighting at low initial and running costs. Each lighting point should therefore provide high light output with a reasonable colour quality, and the lamps should have a long lifetime. As well as careful design to avoid glare and light spill, professional sports lighting must cater for the needs of colour TV coverage and photography. This requires extremely high light levels – three times those used in commercial offices – and superb colour rendering. Because of the limited burning period, lamp lifetime is a less important consideration than reliability.

Dedicated lamps for these applications are the MASTER MHN-FC for recreational and MASTER MHN LA & SA for professional sports.

Area lighting

Covers a range of applications, industrial areas, transport and parking facilities, services and care institutes, etc. It has gained in importance with the appearance of large industrial estates outside or at the edges of urban areas. Its role is to provide orientation and safe working conditions in the hours of darkness as well as by day. Area lighting must be, functional, economical and reliable, and provide glare-free illumination without causing light pollution to the surrounding environment. Parking areas and loading and unloading zones often require better colour rendering than the other areas. High light levels with a good efficacy and reasonable colour rendering, together with a long service lifetime are usually the key criteria in area lighting.

Recommended high power lamps are Quartz Metal Halide (MASTER HPI &

MASTER MHN) as well as MASTER SON PIA

HID Lamps


MASTER MHN-SA

MHN-SA X830R

C

O

MHN-SA (P)SFC

3.6


Product Description

●

Compact quartz metal halide lamps with double-pinch

Product Features

●

Very compact source (Short Arc) with high luminous efficacy and

● superior colour rendering

Double-pinch concept results in long lifetime

●

●

Natural white colour appearance, high colour rendering and good colour stability

Daylight colour temperature eases transition from daylight to artificial lighting

Product Benefits

●

Allows compact and very efficient luminaire systems with high

● precision optics for good beam control and minimal spill light

Very good colour rendering creates a pleasant ambience with high

● visual comfort for players and spectators

Continuous spectral distribution offers a superior solution for

(semi-) professional stadiums with regular TV coverage

Application

●

Professional sports lighting and floodlighting

Luminaires

●

MHN-SA lamps require UV-absorbing and protective front glass and correct thermal behaviour for optimal lamp performance

Environment

●

This product is RoHS compliant

● This product is covered by WEEE

Recommended gear page 3.170 www.philips.com/OEM

Type

MASTER MHN-SA 1800W/956 (P)SFC 230V UNP

CMax

364

DMax

41

ONom

25

MHN-SA XW

C

A

O

X

Type

MASTER MHN-SA XW UNP

MASTER MHN-SA

ANom

318

CMax

369

DMax

41

ONom

25

XNom

25

MHN-SA (P)SFC

Technical data

Type

MASTER MHN-SA 1800W/856/956 230V XW/(P)SFC UNP


MASTER MHN-SA 2000W/956 400V XW UNP

Light data

Type

Lamp

Current

EM

(A)

17.3

10.5

11.3

Lamp

Wattage

EM

(W)

1800.0

1850.0

2040.0

Lamp

Voltage

(V)

120

205

205

Voltage

(V)

230

400

400

Rated

Lamp

Wattage

1800

1800

2000

Dimmable

No

No

No

Ignition

Supply

Voltage

(V)

198

342

360


MASTER MHN-SA 1800W/956 230V XW/(P)SFC UNP



Ordering and packing data

Type






Luminous

Flux Lamp

EM

(lm)

170000

155000

160000

200000

Luminous

Efficacy

Lamp EM

(lm/W)

95

86

86

98

Colour

Designation

Daylight

Daylight

Daylight

Daylight

Colour

Temperature

(K)

5600

5600

5600

5600

Colour

Rendering

Index

(Ra)

85

90

90

90

Chromaticity

Coordinate X

330

330

330

330

Chromaticity

Coordinate Y

360

339

339

362

Operating

Position

ILCOS

MN-1800-H-X830R-/H

MN-1800-H-X830R-/H

MN-1800-H-PSFc20=6-/H

MN-1800-E-PSFc20=6-/H

MN-2000-E-X830R-/H

EAN code

1 piece

8711500202680

8711500201065

8711500200754

8711500200761

8711500200792

Weight

0.107 kg

0.107 kg

0.219 kg

0.22 kg

0.107 kg

Qty bulk packing

1

1

1

1

1

Dimensions bulk packing

43 cm x 9.5 cm x 8.5 cm

43 cm x 9.5 cm x 8.5 cm

43 cm x 9.5 cm x 8.5 cm

43 cm x 9.5 cm x 8.5 cm

43 cm x 9.5 cm x 8.5 cm

EAN code bulk packing

8711500202680

8711500201065

8711500200754

8711500200761

8711500200792

EOC

8711500

202680 00

201065 00

200754 00

200761 00

200792 00 p15 p15 p15 p15

Life to

50% failures

(hrs)

5000

5000

5000


MASTER MHN-SA

Spectral power distribution

10

8

6

4

2

400

MHN-SA 1800W 230V

500

20

16

12

8

4

400 500

MHN-SA 2000W /956 400V

Performance diagram

Lamp performance during run up

% 200

160

I la

120

80

40 W

V la la



0

1

MHN-SA

2 3 4 5 t

Lumen maintenance diagram

100

90

80

70

60

50

0 1000 2000

MHN-SA 1800W /856/956 230V/400V

600

600

3000

700

700

[nm]

[nm]

10

8

6

4

2

400 500

MHN-SA 1800W /956 400V

4000 5000

Burning hours

100

90

80

70

60

50

0 1000

MHN-SA 2000W /956 400V

2000

600

3000

700 [nm]

4000 5000

Burning hours

3.8


MASTER MHN-SA

Life expectancy diagram

100

90

80

70

60

50

0 1000 2000

MHN-SA 1800W /856/956 230V/400V

Cap Base

3000 4000 5000

Burning hours

Operating position

100

90

80

70

60

50

0 1000

MHN-SA 2000W /956 400V

2000 3000 4000 5000

Burning hours

(P)SFC

18 p15


MASTER MHN-LA

MHN-LA 2000W


●

Compact quartz metal halide lamps with double-pinch


●

Compact source (Long Arc) with high luminous efficacy

●

●


Natural white colour appearance, high colour rendering and good

● colour stability



●

Allows compact and efficient luminaire systems with precision optics

● for good beam control and minimal spill light

Good colour rendering creates a pleasant ambience with high visual

● comfort for players and spectators

Continuous spectral distribution offers options for semi-professional stadiums and for professional stadiums with regular TV coverage

Application

●

Professional and semi-professional sports lighting and floodlighting

Luminaires

●

MHN-LA lamps require UV-absorbing and protective front glass and correct thermal behaviour for optimal lamp performance

Environment

●

This product is RoHS compliant.

●

This product is covered by WEEE

Recommended gear page 3.170

www.philips.com/OEM

A

O

X

MHN-LA

3.10


Type

MASTER MHN-LA 1000W/842/956 230V XWH UNP

MASTER MHN-LA 2000W/842/956 400V XWH UNP

ANom

294

364

DMax

40

40

ONom

40.5

108

XNom

35

58

MASTER MHN-LA

MHN-LA 1000W

Technical data

Type

MASTER MHN-LA 1000W/842 230V XWH UNP



Light data

Type






Type






10

8

6

4

2

400 500

MHN-LA 1000W /842 230V

600

ILCOS

MN-1000-E-K-/H

MN-1000-E-K-/H

MN-2000-E-K-/H

MN-2000-E-K-/H

Luminous

Flux Lamp

EM

(lm)

100000

90000

220000

190000

700

Lamp

Current

EM

(A)

9.3

9.6

10.3

EAN code

1 piece

8711500200785

8711500200778

8711500200747

8711500200730

[nm]

Lamp

Wattage

EM

(W)

1040.0

2040.0

2040.0

Luminous

Efficacy

Lamp EM

(lm/W)

96.2

86.5

108

93

Colour

Designation

Cool White

Daylight

Cool White

Daylight

Colour

Temperature

(K)

4200

5600

4200

5600

Weight

0.141 kg

0.137 kg

0.172 kg

0.168 kg

Lamp

Voltage

(V)

125

235

225

Voltage

Qty bulk packing

1

1

1

1

(V)

230

400

400

10

8

6

4

2

400 500

MHN-LA 1000W /956 230V

Rated

Lamp

Wattage

1000

2000

2000

Dimmable

Colour

Rendering

Index

(Ra)

80

90

80

90

Chromaticity

Coordinate X

370

330

370

330

Chromaticity

Coordinate Y

370

339

370

339


43 cm x 9.5 cm x 8.5 cm

43 cm x 9.5 cm x 8.5 cm

43 cm x 9.5 cm x 8.5 cm

43 cm x 9.5 cm x 8.5 cm

600

No

No

No


8711500200785

8711500200778

8711500200747

8711500200730

700

Ignition

Supply

Voltage

(V)

198

342

342

[nm]

Operating

Position

EOC

8711500

200785 00

200778 00

200747 00

200730 00

Life to

50% failures

(hrs)

10000

12000

12000 p5 p5 p5 p5


MASTER MHN-LA

25

20

15

10

5

400 500

MHN-LA 2000W /842 400V



% 200

160

120

I la

80

40

W la

0

V la



2

MHN-LA

4 6 8 10 t


100

90

80

70

60

50

0 2000 4000

MHN-LA 1000W /842/956 230V


100

90

80

70

60

50

0 2000 4000

MHN-LA 1000W /842/956 230V

600 p5

6000

6000

700


[nm]

8000 10000

Burning hours

8000 10000

Burning hours

20

16

12

8

4

400 500

MHN-LA 2000W /956 400V

600

100

90

80

70

60

50

0 3000

MHN-LA 2000W /842/956 400V

6000

100

90

80

70

60

50

0 3000

MHN-LA 2000W /842/956 400V

6000

700 [nm]

9000 12000

Burning hours

9000 12000

Burning hours

3.12


MASTER MHN-LA


MHN-SB

MHN-SB


●

Compact quartz metal halide lamp with single pinch


●

Compact source (Short Base lamp dimensions) with short electrode

● distance and high luminous efficacy

Single pinch concept with long lifetime

●

●

Natural white colour appearance, good colour rendering and stability



●

Allows compact and efficient luminaire systems with precision optics

● for good beam control and minimal light spill

Long lifetime and high reliability in Short Base outer dimensions to

● minimise service needs and maintenance costs

Good colour rendering for a pleasant ambience with high visual comfort

Application

●

Semi-professional sports, area and floodlighting

Luminaires

●

Requires UV-absorbing and protective front glass

●

Correct thermal conditions are required for optimal lamp performance



C

A

O

X

MHN-SB

3.14


Type

MHN-SB 2000W/956 400V K12s-7 WH UNP

ANom

157

CMin

187

DMax

41

ONom

25

XNom

50

MHN-SB

Technical data

Type


Light data

Type



Type



20

16

12

8

4

Lamp

Current

EM

(A)

11.5

Luminous

Flux Lamp

EM

(lm)

200000

Luminous

Efficacy

Lamp EM

(lm/W)

100

Colour

Designation

Daylight

Colour

Temperature

(K)

5600

ILCOS

MN-2000-E-Cable-/H

EAN code

1 piece

8711500206732

400

MHN-SB 2000W /956

500 600 700  [nm]


100

90

80

70

60

50

0 1000 2000

MHN-SB 2000W /956



% 200

160

I la

120

80

40

W

V la la



0

1

MHN-SB

2 3 4 5 t

3000 4000 5000

Burning hours

Operating position p15

Lamp

Wattage

EM

(W)

2040

Lamp

Voltage

(V)

205

Voltage

(V)

400

Weight

0.08 kg

Qty bulk packing

8711500206732


43 cm x 9.5 cm x 8.5 cm


100

90

80

70

60

50

0 1000

MHN-SB 2000W /956

Rated

Lamp

Wattage

2000

2000

Dimmable

No

3000

Ignition

Supply

Voltage

(V)

360

Colour

Rendering

Index

(Ra)

90

Chromaticity

Coordinate X

325

Chromaticity

Coordinate Y

355


8711500206732

Life to

50% failures

(hrs)

-

Operating

Position

EOC

8711500

206732 00

4000 5000

Burning hours p15


HPI-T

HPI-T 2000W


●

Quartz metal halide lamps with clear outer bulb


●

Clear tubular outer bulb

●

●

Unique 3-band technology resulting in high luminous efficacy, both initially and over long lifetime

Renders a natural white colour appearance and good colour stability


●

High safety and comfort level, maintained over life

● Minimal maintenance cost

Application

●

Sports lighting, floodlighting of buildings and monuments, area lighting e.g. harbours and building sites

Luminaires

●

HPI-T lamps require a protective front glass



D

HPI-T 1000W

3.16


Type

HPI-T 1000W/643 E40 220V CRP

CMax

382

DMax

66

LNom

240

ONom

80

HPI-T 2000W

D

HPI-T

Type

HPI-T 2000W/642 E40 380V CRP

HPI-T 2000W/646 E40 220V CRP

CMax

430

430

DMax

101.5

101.5

LNom

267

290

ONom

120

89

HPI-T 1000W

Technical data

Type

HPI-T 1000W/643 E40 220V CRP

HPI-T 2000W/642 E40 380V CRP

HPI-T 2000W/646 E40 220V CRP

Lamp

Current

EM

(A)

8.25

9.1

16.5

Lamp

Wattage

EM

(W)

985.0

1955

1960.0

Lamp

Voltage

(V)

130

232

130

Voltage

(V)

220

380

220

Rated

Lamp

Wattage

1000

2000

2000

Dimmable

No

No

No

Ignition

Peak

Voltage

(V)

5000

5000

5000

Light data

Type

HPI-T 1000W/643 E40 220V CRP

HPI-T 2000W/642 E40 380V CRP

HPI-T 2000W/646 E40 220V CRP


Type

HPI-T 1000W/643 E40 220V CRP

HPI-T 2000W/642 E40 380V CRP

HPI-T 2000W/646 E40 220V CRP

ILCOS

MT-1000/43/2B-H-E40-/H

MT-2000/42/2B-H-E40-/H

MT-2000/46/2B-H-E40-/H

Luminous

Flux Lamp

EM

(lm)

85000

210000

189000

EAN code

1 piece

8711500183736

8711500202352

8711500183767

Luminous

Efficacy

Lamp EM

(lm/W)

86

107

96

Weight

0.433 kg

0.616 kg

0.603 kg

Colour

Designation

Cool White

Cool White

Cool White

Colour

Temperature

(K)

4300

3800

4200

Qty bulk packing

4

4

4

Colour

Rendering

Index

(Ra)

65

65

65

Chromaticity

Coordinate X

370

397

375

Chromaticity

Coordinate Y

380

403

385


18.6 cm x 18.6 cm x 42.6 cm

27.3 cm x 25.3 cm x 47.6 cm

27.3 cm x 25.3 cm x 47.3 cm


8711500183743

8711500202369

8711500183774

Ignition

Supply

Voltage

(V)

198

342

198

Operating

Position

EOC

8711500

183736 45

202352 45

183767 45

Life to

50% failures

(hrs)

12000

12000

12000 p20 p20 p75


HPI-T

CRV diagram b* a*

HPI-T 1000W

HPI-T 1000W/2000W




% 200

160

I la

120

80

40

W la

V la



0

1

HPI-T

2 3 4 t

5

100

90

80

70

60

50

0 2000 4000 6000 8000 10000

Burning hours

HPI-T 1000W/2000W /643/646


100

90

80

70

60

50

0 2000 4000 6000 8000 10000

Burning hours

HPI-T 1000W/2000W /643/646

Cap Base Operating position

100

90

80

70

60

50

0

HPI-T 2000W /642

2000

100

90

80

70

60

50

0

HPI-T 2000W /642

2000

4000 6000 8000 10000

Burning hours

4000 6000 8000 10000

Burning hours

E40

40 p20 p75

3.18


HPI-T


MASTER HPI-T Plus

HPI-T

D

Type

MASTER HPI-T Plus 250W/645 E40 SLV



●

Quartz metal halide lamps with clear outer bulb


●


●

●


Renders a natural white colour appearance and good colour stability


●


●

●

Minimal maintenance cost

Initial investment saving options with “Plus”-concept

Application

●

Sports lighting. floodlighting of buildings and monuments, area lighting e.g. harbours and building sites, canopy lighting e.g. petrol stations, horticultural lighting

Luminaires

●

HPI-T Plus lamps require a protective front glass

System

●

Can be run on HPI-gear as well as on SON-gear (“Plus”-concept).

The results in both light output and colour temperature are different

Environment

●

Good environmental choice because of long service life

●

●





CMax

255

286

DMax

46.5

46.5

LNom

158

180

ONom

29

40

HPI-T

3.20


MASTER HPI-T Plus

Technical data

Type



Light data

Type




Type





CRV diagram b*

Lamp

Current

EM

(A)

2.10

3.4

Luminous

Flux Lamp

EM

(lm)

20500

35000

Lamp

Wattage

EM

(W)

245

382

Lamp

Voltage

(V)

128

125

Rated

Lamp

Wattage

250

400

Dimmable

No

No

Luminous

Efficacy

Lamp EM

(lm/W)

84

89

Colour

Designation

Cool White

Cool White

Colour

Temperature

(K)

4500

4500

Ignition

Peak

Voltage

(V)

5000

5000

Colour

Rendering

Index

(Ra)

65

65

Chromaticity

Coordinate X

362

362

Chromaticity

Coordinate Y

373

370

Ignition

Supply

Voltage

(V)

198

198

Life to

50% failures

(hrs)

20000

20000

Operating

Position p20 p20

ILCOS

MT-250/45/2B-H-E40-/H

MT-250/45/2B-H-E40-/H

MT-400/45/2B-H-E40-/H

MT-400/45/2B-H-E40-/H

EAN code

1 piece

8711500179890

8711500179890

8711500179906

8711500179906

Weight

0.161 kg

0.161 kg

0.18 kg

0.18 kg

Qty bulk packing

12

80

12

80


31.7 cm x 19.6 cm x 27.7 cm

49.3 cm x 39.7 cm x 30.1 cm

31.7 cm x 19.6 cm x 30.6 cm

49.3 cm x 39.7 cm x 32.7 cm


8711500182975

8711500210890

8711500182999

8711500210883

EOC

8711500

179890 15

179890 70

179906 15

179906 70 a*

HPI-T 400W

HPI-T 250W/400W


600

500

400

300

200

100

300 400 500

HPI-T Plus 250W/400W

600 700 [nm]


MASTER HPI-T Plus



% 200

160

120

I la

80

40

W la

V la



0

1

HPI-T

2 3 4 5 t


100

90

80

70

60

50

0 4000 8000

HPI-T 250W/400W /643/645

12000 16000 20000

Burning hours


100

90

80

70

60

50

0 4000 8000

HPI-T 250W/400W /643/645

12000 16000 20000

Burning hours

Photometric diagram

HPI-T


E40

40 p20

3.22


MASTER HPI-T Plus


MASTER HPI Plus

HPI


●

Quartz metal halide lamps with opalized outer bulb


●

Ovoid, internally white coated outer bulb

●


●

●

●

Available in cool white and daylight colour appearance demonstrating good colour stability

“S”-type for direct retrofit for HPL lamps

“P”-type for use without protective front shield


●


●

●

Minimal maintenance cost

Initial investment saving options with “Plus”-concept and “S” and

●

“P”-types

Adjustable atmosphere creation by using appropriate colour temperature

Application

●

High bay lighting, e.g. industrial workshops, exhibition halls, hypermarkets, shopping malls, DIY stores, churches, airports and train stations

Luminaires

●

HPI Plus BU-P and BUS-P suitable for use in open luminaires

●

For other HPI Plus lamps a protective front glass is required

System

●

Can be run on HPI-gear as well as on SON-gear (“Plus”-concept).

●

The results in both light output and colour temperature are different

HPI Plus BUS and BUS-P types require an HPL-gear and no ignitor

Environment

●

Good environmental choice because of long service life

●

●





3.24


D

Type

MASTER HPI Plus 250W/745/767 BU E40 CRP

MASTER HPI Plus 250W/745 BU-P E40 SLV

MASTER HPI Plus 400W/745/767 BU E40 CRP

MASTER HPI Plus 400W/745 BU-P E40 CRP


MASTER HPI Plus 400W/745 HOR E40 CRP

MASTER HPI Plus

CMax

284

218

286

226

290

290

DMax

121.5

90

121.5

91

117.5

122

HPI

Technical data

Type

MASTER HPI Plus 250W/745/767 BU E40 CRP/SLV

MASTER HPI Plus 400W/745/767 BU(-P) (BUS) E40 CRP/SLV


MASTER HPI Plus 400W/745 BUS E40 CRP/SLV

Light data

Type

MASTER HPI Plus 250W/745 BU E40 CRP/SLV

MASTER HPI Plus 250W/767 BU E40 CRP

MASTER HPI Plus 400W/745 BU(-P) (BUS) E40 CRP/SLV




Type













MASTER HPI Plus 400W/745 BUS E40 CRP

MASTER HPI Plus 400W/745 BUS-P E40 CRP

MASTER HPI Plus 400W/745 BUS-P E40 SLV

Lamp

Current

EM

(A)

2.2

3.4

3.4

3.4

Luminous

Flux Lamp

EM

(lm)

18000

18000

32500

30000

32500

Lamp

Wattage

EM

(W)

253

395

382

395

Lamp

Voltage

(V)

128

125

125

125

Luminous

Efficacy

Lamp EM

(lm/W)

72

72

82

77

82

Colour

Designation

Cool White

Daylight

Cool White

Cool White

Daylight

Colour

Temperature

(K)

4500

6700

4500

4500

6700

Rated

Lamp

Wattage

250

400

400

400

Dimmable

No

No

No

No

Ignition

Peak

Voltage

(V)

5000

5000

5000

-

Colour

Rendering

Index

(Ra)

69

69

69

69

69

Chromaticity

Coordinate X

380

308

360

361

308

Chromaticity

Coordinate Y

354

318

362

367

318

Ignition

Supply

Voltage

(V)

198

198

198

198

Life to

50% failures

(hrs)

20000

20000

20000

20000

Operating

Position

ILCOS

ME-250/45/2A-H-E40-/V

ME-250/45/2A-H-E40-/V

ME-250/45/2A-H-E40-/V

ME/S-250/45/2A-H-E40-/V

ME/S-250/45/2A-H-E40-/V

ME-250/67/2A-H-E40-90/225/V

ME-400/45/2A-H-E40-/V

ME-400/45/2A-H-E40-/V

ME/S-400/45/2A-H-E40-/V

ME/S-400/45/2A-H-E40-/V

ME-400/45/2A-H-E40-/H

ME-400/67/2A-H-E40-90/225/V

ME-400/45/2A-H/I-E40-/V

ME/S-400/45/2A-H/I-E40-/V

ME/S-400/45/2A-H/I-E40-/V

EAN code

1 piece

8711500181145

8711500181145

8711500181145

8711500202062

8711500211477

8711500207395

8711500182524

8711500182524

8711500194824

8711500211439

8711500181084

8711500207371

8711500181114

8711500193179

8711500211453

Weight

0.392 kg

0.243 kg

0.25 kg

0.25 kg

0.26 kg

0.394 kg

0.192 kg

0.192 kg

0.192 kg

0.19 kg

0.22 kg

0.25 kg

0.25 kg

0.25 kg

0.26 kg

Qty bulk packing

12

20

12

12

24

12

12

6

6

6

6

6

6

6

6


47.5 cm x 30.6 cm x 24.6 cm

58.3 cm x 40.1 cm x 24.6 cm

58.3 cm x 40.1 cm x 24.6 cm

47.5 cm x 30.6 cm x 24.6 cm

47.2 cm x 30.6 cm x 24.6 cm

47.5 cm x 30.6 cm x 24.6 cm

58 cm x 40.2 cm x 29.9 cm

44.1 cm x 27.6 cm x 29.9 cm

44.1 cm x 27.6 cm x 29.9 cm

27.6 cm x 14.1 cm x 29.9 cm

44.1 cm x 27.6 cm x 29.9 cm

44.1 cm x 27.6 cm x 29.9 cm

44.1 cm x 27.6 cm x 29.9 cm

44.1 cm x 27.6 cm x 29.9 cm

44.1 cm x 27.6 cm x 29.9 cm


8711500181152

8711500210852

8711500200709

8711500202079

8711500211484

8711500207401

8711500210838

8711500182531

8711500194855

8711500211446

8711500181091

8711500207388

8711500181121

8711500193261

8711500211460

EOC

8711500

181145 15

181145 05

181145 30

202062 15

211477 15

207395 15

182524 15

182524 10

194824 10

211439 10

181084 10

207371 10

181114 10

193179 10

211453 10 h15 h15 h15 p20 h15


MASTER HPI Plus


600

500

400

300

200

100

300 400 500

HPI 400W



% 200

160

I la

120

HPI

80

40

W la

V la



0

1 2 3 4 5 t

600 700 [nm]


% 200

160

I la

120

HPI

80

40

W la

V la



0

1 2 3 4 t

5


100

90

80

70

60

50

0 4000 8000

HPI 250W/400W /743/767

Cap Base

12000 16000 20000

Burning hours



210 ° 180 ° 150 °

240 ° 120 °

270 °

100 50

90 °

300 ° 60 °

330 ° 0 ° 30 °

HPI

210 ° 180 ° 150 °

240 °

270 °

100 50

120 °

90 °

300 ° 60 °

330 ° 0 ° 30 °


100

90

80

70

60

50

0 4000 8000

HPI 250W/400W /743/767

12000 16000 20000

Burning hours

E40

40 h15 p20

3.26


MASTER HPI Plus


MASTER CityWhite CDO-TT

CDO-TT 150W E40


●

Ceramic metal halide Outdoor with clear tubular outer bulb


●

Robust lamp with long lifetime

●

Directly retrofit on HPS (SON) installations for upgrade from yellow to white light

●

Good colour rendering and harmonized warm white colour temperature


● Reduced cost of ownership compared to predecessor

●

MASTERColour CDM-TT

Comfortable warm colour impression with stable colour over

●

● lifetime

Flexible light levels and reduced energy consumption possible via dimming option

Upgrade for existing HPL installations with gear exchange

Application

●

City centres, shopping centres and pedestrian areas, residential areas, road lighting and floodlighting

Luminaires

●

In the highly unlikely event of lamp breakage by incorrect use, vandalism or end of life effects, the luminaire housing should be able to contain heated glass, metal and / or ceramic particles

System

● Must be used with a SON gear and SON ignitor

●

Warm restart time can be up to fifteen minutes. T15 ignitors are therefore advised

●

●

Dimming only possible with electronic gear, DynaVision 1-10 V

Achieves optimal performance on Philips PrimaVision electronic gear

Environment

●

Good environmental choice because of high energy effficiency in

●

● white light

Products are RoHS compliant

Products are covered by WEEE



3.40


CDO-TT

D

Type

MASTER CityWhite CDO-TT 70W/828 E27 SLV





CMax

156

209

211

255

DMax

32.5

47

47

47

LNom

102

132

132

157

ONom

9

21.3

7

7

CDO-TT 100W E40

Technical data

Type

MASTER CityWhite CDO-TT 70W




Light data

Type

Lamp

Current

EM

(A)

1

1.2

1.8

3

Lamp

Wattage

EM

(W)

72

95

147

244

Lamp

Voltage

(V)

90

95

100

93

Rated

Lamp

Wattage

Dimmable

70

100

150

250

Yes

Yes

Yes

Yes

Ignition

Peak

Voltage

(V)

2500

5000

5000

5000

Ignition

Supply

Voltage

(V)

198

198

198

198

Ignition

Time

(sec)

30

30

30

30

Run-up time

90%

(min)

3

2

3

3

Life to

50% failures

(hrs)

14000

14000

14000

9000






Type





Luminous

Flux Lamp

EM

(lm)

6300

8800

13500

22500

Luminous

Efficacy

Lamp EM

(lm/W)

88

91

92

92

Colour

Designation

Warm White

Warm White

Warm White

Warm White

Colour

Temperature

(K)

2800

2800

2800

2800

Colour

Rendering

Index

(Ra)

83

83

85

85

Chromaticity

Coordinate X

452

460

460

431

Chromaticity

Coordinate Y

402

394

403

375

Operating

Position any any any p5

ILCOS

MT-70/28/1B-H-E27

MT-100/20/1B-H-E40

MT-150/28/1B-H-E40

MT-250/28/1B-H-E40

EAN code

1 piece

8711500205469

8711500206817

8711500205360

8711500209054

Weight

0.046 kg

0.137 kg

0.135 kg

0.161 kg

Qty bulk packing

12

12

12

12


16.6 cm x 13.4 cm x 18.9 cm

31.7 cm x 19.6 cm x 23.6 cm

31.7 cm x 19.6 cm x 23.6 cm

31.7 cm x 19.6 cm x 27.7 cm


8711500205476

8711500206824

8711500205377

8711500209061

EOC

8711500

205469 15

206817 15

205360 15

209054 15




300

250

200

150

100

50

300

CDO-TT /828

400 500


600 700  [nm]

100

90

80

70

60

50

2000 4000 6000 8000 10000 12000 14000 16000 18000

Burning hours

CDO-TT 70W/100W/150W


100

90

80

70

60

50

100 2000 4000 6000 8000 10000 12000 14000 16000 18000

Burning hours

CDO-TT 70W/100W/150W

Cap Base



% 200

160

120

I la

80

40

W la

0

V la



1

CDO-TT

2 3 4 t

5

100

90

80

70

60

50

100

CDO-TT 250W

2000 4000 6000 8000 10000 12000 14000 16000

Burning hours

100

90

80

70

60

50

100

CDO-TT 250W

2000 4000 6000 8000 10000 12000 14000 16000

Burning hours


E27

27

E40

40 any p5

3.42




Artcolour MH-T

MH-T


●

Quartz metal halide lamps rendering coloured light


●

Single-ended lamp with clear tubular outer bulb

●

●

Available in three colours: blue, green and violet

Suitable for direct replacement from regular white HPI-T illumination to coloured flood lighting


●

Brings colourful light on any floodlit object and instant change of

●

● atmosphere

High luminous output in comparison with white metal halide lamps using an additional colour filter

Eliminates the need for expensive and fragile colour filters

Application

●

Decorative lighting of buildings, landmarks, statues, monuments,

● parks, resorts and attractions

Multi-functional lighting for promotional, seasonal and festive purposes, at special events etc.

Luminaires

●

Must be used in a closed luminaire

System

●

ArtColour runs on HPI-gear only



D

MH-T

Type

Artcolour MH-T 400W Blue/Green/Violet E40 SLV

3.28


CNom

283

DNom

46

LMin

164

LNom

168

LMax

172

OMin

43.5

ONom

44.5

OMax

45.5

Artcolour MH-T

Technical data

Type Lamp

Wattage

EM

(W)

380

Lamp

Voltage

(V)

120

Rated

Lamp

Wattage

400

Ignition

Supply

Voltage

(V)

198

Life to

50% failures

(hrs)

5000 Artcolour MH-T 400W Blue/Green/Violet E40 SLV

Light data

Type

300

MH-T Blue

4

3

2

1

Artcolour MH-T 400W Blue E40 SLV

Artcolour MH-T 400W Green E40 SLV

Artcolour MH-T 400W Violet E40 SLV


Type

Artcolour MH-T 400W Blue E40 SLV

Artcolour MH-T 400W Green E40 SLV

Artcolour MH-T 400W Violet E40 SLV


4

3

2

1

400 500

300

MH-T Violet

400 500



% 200

160

I la

120

80

W la

40

V la

0

1



MH-T

2 3 4 5 t

600

600

EAN code

1 piece

8711500201591

8711500201638

8711500201652

Luminous

Flux Lamp

EM

(lm)

10000

29000

10000

Colour

Designation

Chromaticity

Coordinate X

Chromaticity

Coordinate Y

Blue

Green

Violet

2100

2500

3000

1800

5900

2000

Operating

Position p20 p20 p20

Weight

0.201 kg

0.201 kg

0.209 kg

700 [nm]

700 [nm]

Qty bulk packing

6

6

6

4

3

2

1

6

5

300

MH-T Green

400


24.7 cm x 19 cm x 35.6 cm

24.7 cm x 19 cm x 34 cm

24.7 cm x 19 cm x 34 cm

500 600


8711500201607

8711500201645

8711500201669

700 [nm]

EOC

8711500

201591 10

201638 10

201652 10


Artcolour MH-T


100

90

80

70

60

50

0 1000 2000

MH-T 400W BL

3000

100

90

80

70

60

50

0

MH-T 400W VI

1000 2000 3000

4000 5000

Burning hours

4000 5000

Burning hours

100

90

80

70

60

50

0 1000 2000

MH-T 400W GR


100

90

80

70

60

50

0 1000 2000

MH-T 400W BL

3000 4000 5000

Burning hours

3000 4000 5000

Burning hours

100

90

80

70

60

50

0

MH-T 400W GR

Cap Base

1000 2000 3000 4000 5000

Burning hours

100

90

80

70

60

50

0

MH-T 400W VI

1000


2000 3000 4000 5000

Burning hours

E40

40 p20

3.30


Artcolour MH-T


MASTER MHN-FC

MHN-FC 1000W


●

Compact quartz metal halide lamps with double pinch


●


●

●

●

Choice of 1000 W and 2000 W types

Natural white colour appearance

Compact light source allows small luminaire design


●

Allows compact luminaire systems with precision optics for minimal

●

● light spill

Good colour rendering creates a pleasant ambience with high visual comfort for players and spectators

Continuous spectral distribution offers options for semi-professional stadiums and area lighting

Application

●

Recreational sports and area floodlighting

Luminaires

●

MHN-FC lamps require a protective, UV-absorbing front glass and correct thermal behaviour for optimal lamp performance

Environment

●


●




X

L

C

A

O

MHN-FC

3.32


Type

MASTER MHN-FC 1000W/740 230V XW UNP


ANom

226

290

DMax

33

33

ONom

42.5

108

XNom

58

58

MASTER MHN-FC

MHN-FC 2000W

Technical data

Type



Light data

Type




Type




20

16

12

8

4

300 400

MHN-FC 2000W /740

500

6

4

12

10

8

2

300 400

MHN-FC 1000W /740

500

600

600

Lamp

Current

EM

(A)

10

10.11

Lamp

Wattage

EM

(W)

1035

2032

700 � [nm]

Lamp

Voltage

(V)

125

220

Voltage

(V)

230

400

Rated

Lamp

Wattage

1000

2000

Dimmable

No

No

Ignition

Supply

Voltage

(V)

198

342

Luminous

Flux Lamp

EM

(lm)

93000

210000

Luminous

Efficacy

Lamp EM

(lm/W)

91

102

Colour

Designation

White

White

Colour

Temperature

(K)

4100

4200

Colour

Rendering

Index

(Ra)

65

60

Chromaticity

Coordinate X

379

380

Chromaticity

Coordinate Y

383

419

Operating

Position p5 p5

700 � [nm]

Life to

50% failures

(hrs)

10000

14000

ILCOS

MD-1000/40/2B-H-XW

MD-2000/40/2B-H-XW

EAN code

1 piece

8711500214249

8711500213495

Weight

0.14 kg

0.19 kg

Qty bulk packing

1

1


43 cm x 9.5 cm x 8.5 cm

43 cm x 9.5 cm x 8.5 cm


8711500214249

8711500213495

EOC

8711500

214249 00

213495 00

700 � [nm]

6

4

12

10

8

2

300 400

MHN-FC 1000W /750

500 600


MASTER MHN-FC


100

90

80

70

60

50

0 2000 4000

MHN-FC 1000W /740/750

6000 8000 10000

Burning hours


100

90

80

70

60

50

0 2000 4000

MHN-FC 1000W /740/750



% 200

160

120

I la

80

40

W la

0

V la



2

MHN-FC

4 6 8 10 t

6000 8000 10000

Burning hours

Operating position p5

100

90

80

70

60

50

0 2000

MHN-FC 2000W /740

100

90

80

70

60

50

0 2000

MHN-FC 2000W /740

4000 6000 8000 10000

Burning hours

4000 6000 8000 10000

Burning hours

3.34


MASTER MHN-FC


MASTER CosmoWhite CPO-TW

CPO-TW 140W PGZ12

Product Desription

●

New-generation ceramic metal halide lamps for outdoor lighting with white light, using a new lamp base and clear quartz outer bulb


●

Extreme high energy efficiency

●

Unique new burner design and positioning in combination with best lamp fixation (PGZ12)

●

●

Compact size: 50% smaller than SON/HPL systems

New electronic gear platform meets the most demanding public lighting requirements


●

Attractive white light

●

Best optical efficacy allows greater spacing between luminaires, thereby reducing investment

●

●

●

Highest energy saving and lowest cost of ownership

Lower our energy cost with 10-150% compared with todays lightsources for outdoor applications

Compact size & unique burnershape allows optimised optic and

●

● luminaire design

Optimal lamp service lifetime and energy savings initially and over lifetime

Robust, dedicated outdoor electronic Xtreme gear for long and reliable operation, ensuring future-proof outdoor installation

Application

●

Urban Public Lighting for city centres, residential areas and roads

System

●

Designed for use with electronic gear only

●

Lamps and gear developed together to ensure optimal system operation for:

○

○

Lowest system energy initially and over lifetime

Robust, long-life outdoor-proof installation (lightning strike and peak voltage protection)

Environment

●

Philips Green product product with high efficacy minimises

○ environmental impact and CO

2 emission:

Good environmental choice due to highest energy efficiency in

○

○ combination with compact white light

Compact size for low material and packaging use

RoHS compliant (lead-free), very low mercury content (max. 2.5 mg), covered by WEEE



3.36


D

Type

MASTER CosmoWhite CPO-TW 45W/628 PGZ12 1CT

MASTER CosmoWhite CPO-TW 60W 728 PGZ12 1CT




CMax

132

132

143

147

DNom

19

19

19

19

DMax

20

20

20

20

LNom

66

66

59

59

ONom

18

20

15

15

CPO-TW PGZ12

Technical data

Type





Lamp

Current

EL

(A)

0.5

0.65

0.97

1.49

Lamp

Wattage

EL

(W)

45

60

90

140

Lamp

Voltage

(V)

90

92

92

94

Rated

Lamp

Wattage

Dimmable

90

140

45

60

No

No

No

No

Ignition

Peak

Voltage

(V)

5000

5000

5000

5000

Ignition

Supply

Voltage

(V)

160

-

160

-

Ignition

Time

(sec)

30

30

30

30

Run-up time

90%

(min)

4

3

4

4

Light data

Type






Type







% 300

250

I la

200



150

W la

100

V la

50

0

0 2 4 6 t

8

CPO-TW 45W

Luminous

Flux Lamp

EL

(lm)

4300

6800

10450

16500


% 220

I la

180

140

100

R a

W la

60

V la

20



0 0,5 1,0

CPO-TW 60W

1,5 2,0 2,5 3,0 t

Luminous

Efficacy

Lamp EL

(lm/W)

96

114

116

118

Colour

Designation

White

White

White

White

Colour

Temperature

(K)

2720

2730

2880

2860

Colour

Rendering

Index

(Ra)

66

66

60

66

Chromaticity

Coordinate X

458

453

444

444

Chromaticity

Coordinate Y

409

402

403

401

ILCOS

MT-45/28/2B-H-PGZ12

MT-60/28/2B-H-PGZ12

MT-90/28/2B-H-PGZ12

MT-140/28/2B-H-PGZ12

EAN code

1 piece

8711500211194

8711500208514

8711500211217

8711500208538

Weight

0.034 kg

0.034 kg

0.038 kg

0.04 kg

Qty bulk packing

12

12

12

12


20.6 cm x 17.2 cm x 19 cm

20.6 cm x 17.2 cm x 19 cm

20.6 cm x 17.2 cm x 20.7 cm

20.6 cm x 17.2 cm x 20.7 cm


8711500211200

8711500208521

8711500211224

8711500208545

EOC

8711500

211194 15

208514 15

211217 15

208538 15


% 180

160

140

120

100

W la

80

60

40

20

0

0

I la

0,5

V la



1,0 1,5 2,0 2,5 3,0 t

CPO-TW 90W

Operating

Position


% 160

I la

140

120

100

W la

80

60

40

20

V la



0 0,5 1,0 1,5

CPO-TW 140W

2,0 2,5 3,0 t any any any any




��

��

��

��

��

��

��

��

CPO-TW 45W /628

��

��

��

��

��

��

��

��

CPO-TW 60W

��

300

250

200

150

100

50

300

CPO-TW 90W

400 500


100

90

80

70

60

50

0 4000 8000 12000

600

16000

700 [nm]

20000 24000

Burning hours

CPO-TW


��

��

��

��

��

��

��

CPO-TW 140W

��


100

90

80

70

60

50

0 4000 8000

��

12000

��

16000

��

20000 24000

Burning hours

CPO-TW any

3.38




MASTER CityWhite CDO-ET

CDO-ET



D

CDO-ET

3.44



●

Ceramic metal halide Outdoor with opalized ovoid outer bulb


●

Robust lamp with long lifetime

●

Directly retrofit on HPS (SON) installations for upgrade from yellow to white light

●

Good colour rendering and harmonized warm white colour temperature


● Reduced cost of ownership compared to predecessor

●

MASTERColour CDM-ET

Comfortable warm colour impression with stable colour over

●

● lifetime

Flexible light levels and reduced energy consumption possible via dimming option

Upgrade for existing HPL installations with gear exchange

Application

●

City centres, shopping centres and pedestrian areas, residential areas, road lighting and floodlighting

Luminaires

●


System

● Must be used with a SON gear and SON ignitor

●

Warm restart time can be up to fifteen minutes. T15 ignitors are therefore advised

●

●

Dimming only possible with electronic gear, DynaVision 1-10 V

Achieves optimal performance on Philips PrimaVision electronic gear

Environment

●

Good environmental choice because of high energy effficiency in

●

● white light



Type

MASTER CityWhite CDO-ET 70W/828 E27 SLV



CMax

156

186

230

DMax

71

75

91

MASTER CityWhite CDO-ET

Technical data

Type

MASTER CityWhite CDO-ET 70W



Light data

Type





Type





300

250

200

150

100

50

Lamp

Current

EM

(A)

0.980

1.2

1.800

Luminous

Flux Lamp

EM

(lm)

5600

8300

12500

Lamp

Wattage

EM

(W)

71

95

145

ILCOS

ME-70/28/1B-H-E27

ME-100/28/1B-H-E40

ME-150/28/1B-H-E40

300 400 500

CDO-ET /828


100

90

80

70

60

50

600 700

2000 4000 6000 8000 10000 12000 14000 16000 18000

Burning hours

CDO-ET

Cap Base

Lamp

Voltage

(V)

87

90

93

Rated

Lamp

Wattage

70

100

150

Dimmable

Yes

Yes

Yes

Luminous

Efficacy

Lamp EM

(lm/W)

79

87

86

Colour

Designation

Warm White

Warm White

Warm White

Colour

Temperature

(K)

2820

2800

2800

Ignition

Peak

Voltage

(V)

2500

5000

5000

Ignition

Supply

Voltage

(V)

198

198

198

EAN code

1 piece

8711500205445

8711500206794

8711500205483

 [nm]

Weight

0.052 kg

0.128 kg

0.16 kg

Qty bulk packing

24

24

12


45.5 cm x 30.7 cm x 17.2 cm

59.4 cm x 35.6 cm x 20.5 cm

47.5 cm x 30.6 cm x 24.6 cm



% 200

160

120

I la

80

W la

40

0

V la



1 2 3 4

CDO-ET

Life expectancy diagram t

5

100

90

80

70

60

50

100

Ignition

Time

(sec)

30

30

30

Colour

Rendering

Index

(Ra)

78

80

82

Chromaticity

Coordinate X

449

451

460

Chromaticity

Coordinate Y

405

402

403


8711500205452

8711500206800

8711500205490

Run-up time

90%

(min)

3

2

3

Life to

50% failures

(hrs)

14000

14000

14000

Operating

Position

EOC

8711500

205445 30

206794 30

205483 15

2000 4000 6000 8000 10000 12000 14000 16000 18000

Burning hours

CDO-ET

Operating position any any any

E27

27

E40

40 any


MASTERColour CDM-TT

CDM-TT 70W E27

D

Type

MASTERColour CDM-TT 70W/942 E27 SLV



●

High-intensity discharge lamps with a CDM discharge tube inside a

SON lamp clear tubular outer bulb


●

Robust lamp giving a pleasant white light and a stable colour over

● lifetime

Good colour rendering

●

Dimming not recommended because of negative effects on lamp performance (lumen maintenance, colour and life)


●

Runs on SON gear so directly replaces equivalent wattage SON lamp for simple upgrade from yellow to white light

Application

●

City centres, shopping centres and pedestrian areas, residential

● areas, road lighting

City beautification: decorative lighting and floodlighting

Luminaires

●


System

●

Must be used in combination with a gear and an ignitor

●

Must be used with a SON gear and SON ignitor in accordance with

SON IEC standards (ignition pulse between 1.8 kV and 2.5 kV for

●

●

70 W)

For optimum lamp performance, the mains voltage may deviate by maximum +6/-8% from the voltage indicated on the type plate

Warm restart time can be up to fifteen minutes. if the lamp does not start (e.g. with T5 ignitors), the installation must be switched off for fifteen minutes



CMax

156

211

DMax

32.5

46

LNom

102

133

ONom

6

8

CDM-TT

3.46


MASTERColour CDM-TT

Technical data

Type



Light data

Type




Type




300

250

200

150

100

50

400 500 300

CDM-TT /830

300

250

200

150

100

50

300

CDM-TT 150W /942

400 500

Lamp

Current

EM

(A)

0.970

1850

Lamp

Wattage

EM

(W)

73

145

Lamp

Voltage

(V)

91

93

Rated

Lamp

Wattage

Dimmable

70

150

No

No

Ignition

Peak

Voltage

(V)

1800

2800

Ignition

Supply

Voltage

(V)

198

198

Ignition

Time

(sec)

30

30

Run-up time

90%

(min)

4

4

Life to

50% failures

(hrs)

9000

9000

Luminous

Flux Lamp

EM

(lm)

6400

12000

Luminous

Efficacy

Lamp EM

(lm/W)

85

83

Colour

Designation

Cool White

Cool White

Colour

Temperature

(K)

4200

4200

Colour

Rendering

Index

(Ra)

90

90

Chromaticity

Coordinate X

369

386

Chromaticity

Coordinate Y

370

369

Operating

Position any any

ILCOS

MT-70/42/1A-H-E27

MT-150/42/1A-H-E40

EAN code

1 piece

8711500209658

8711500209672

Weight

0.047 kg

0.135 kg

Qty bulk packing

12

12


16.6 cm x 13.4 cm x 18.9 cm

31.7 cm x 19.6 cm x 23.6 cm


8711500209665

8711500209689

EOC

8711500

209658 15

209672 15

600

600

700 [nm]

700 � [nm]

300

250

200

150

100

50

300

CDM-TT 70W /942

400 500 600 700 [nm]


MASTERColour CDM-TT



% 200

160

120

I la

80

40

W la

0

V la



1

CDM-TT /830

2 3 4 5 t


210 ° 180 ° 150 °

240 ° 120 °

270 °

1500 1000 500

90 °

300 °

330 °

CDM-TT 150W

0 °

Cap Base

30 °

60 °


% 200

160

120

I la

80

W la

40

0

V la 

120 240 360 480 600 t (sec.)

CDM-TT 70W /942

210 ° 180 ° 150 °

240 °

270 °

1500 1000 500

120 °

90 °

300 ° 60 °

330 ° 0 ° 30 °


% 200

160

120

I la

80

W la

40

0

V la 

120 240 360 480 600 t (sec.)

CDM-TT 150W /942

210 ° 180 ° 150 °

240 °

270 °

750 500 250

120 °

90 °

300 °

330 °

CDM-TT 70W

0 °


30 °

60 °

210 ° 180 ° 150 °

240 °

270 °

750 500 250

120 °

90 °

300 ° 60 °

330 ° 0 ° 30 °

E27

27

E40

40 any

3.48


MASTERColour CDM-TT


MASTER Agro

SON-T Agro E40

D

SON-T

3.50



●

High Pressure Sodium lamp with clear outer bulb, high lumen maintenance and increased blue radiation


●


●

“Agro” concept with increased blue radiation results in more compact and sturdy plant development

●

●

Ceramic discharge tube with Philips Integrated Antenna (PIA) for a long and reliable lifetime

ZrAl getter ensures high lumen maintenance and few early failures


●

Optimised performance for horticultural applications, especially at

● lower lighting levels

Optimizing plant development and quality with good leaf and bloom colour and extra branching

Application

●

Horticultural applications, plant irradiation

Environment

●

Good environmental choice because of high energy efficiency and

●

● long reliable life





Type

MASTER Agro 400W E40 SLV

CMax

283

DMax

47

LNom

175

ONom

83

MASTER Agro

Technical data

Type Lamp

Current

EM

(A)

4.13

Lamp

Wattage

EM

(W)

423.0

Lamp

Voltage

(V)

116

Voltage

(V)

230

Rated

Lamp

Wattage

Dimmable

400 No

Ignition

Peak

Voltage

(V)

2800

Ignition

Supply

Voltage

(V)

198

Ignition

Time

(sec)

10

Run-up time

90%

(min)

5

Life to

50% failures

(hrs)

30000 MASTER Agro

Light data

Type


Luminous

Flux Lamp

EM

(lm)

55000

Luminous

Efficacy

Lamp EM

(lm/W)

130

Colour

Temperature

(K)

2000

Colour

Rendering

Index

(Ra)

25

Chromaticity

Coordinate X

520

Chromaticity

Coordinate Y

415

Operating

Position any


Type


ILCOS

ST-400-H/E-E40

EAN code

1 piece

8711500707505


600

500

400

300

200

100

300 400

SON-T Agro 400W

500


100

90

80

70

60

50

0 8000 16000

600

SON-T 100W/150W/250W/400W



% 200

160

I la

120

80 W la

40

V la

0



2 4

SON-T Agro 400W

6 8 10 t

Cap Base

E40

700

40

 nm

24000 32000

Burning hours

Weight

0.192 kg

Qty bulk packing

12


16.9 cm x 22.5 cm x 31.1 cm


210 ° 180 ° 150 °

240 ° 120 °

270 °

100 50

90 °

240 °


8711500183019

210 ° 180 ° 150 °

270 ° 100 50

300 ° 60 ° 300 °

SON-T

330 ° 0 ° 30 °


100

90

80

70

60

50

0 8000

SON-T 100W/150W/250W/400W


16000 any

330 ° 0 ° 30 °

EOC

8711500

707505 15

120 °

90 °

60 °

24000 32000

Burning hours


MASTER GreenPower

SON-T Green Power/GreenPower CG T E39/E40 T40/T46


●

High Pressure Sodium lamp with clear outer bulb, high lumen maintenance and optimised micromol output


●


●


●

●


“Green Power” concept with optimised micromol output (growth light)

● “Plus” concept with high efficacy translated into high light output


●

Optimised performance for horticultural applications

●

High lumen maintenance safeguards a constant crop quality and quantity over life

Application

●

Horticultural applications, plant irradiation

Environment

●


●






D

Type

MASTER GreenPower CG T 400W E40 SLV/UNP


MASTER GreenPower 600W 400V E40 SLV/UNP

MASTER GreenPower 600W 480V E40 SLV

SON-T

3.52


CMax

275

275

283

283

DMax

46

46

47

47

LNom

175

166

169

168

ONom

83

102

102

120

MASTER GreenPower

Technical data

Type

MASTER GreenPower CG T 400W E40

MASTER GreenPower CG T 600W E40

MASTER GreenPower 600W 400V E40

MASTER GreenPower 600W 480V E40

Light data

Type

Lamp

Current

EM

(A)

4.230

6.3

3.620

3.620

Lamp

Wattage

EM

(W)

420

605

608

595

Lamp

Voltage

(V)

113

115

191

208

Voltage

(V)

230

230

400

480

Rated

Lamp

Wattage

Dimmable

400

600

600

600

Yes

Yes

Yes

Yes

Ignition

Peak

Voltage

(V)

2800

3500

3500

3500

Ignition

Supply

Voltage

(V)

198

220

398

480

Ignition

Time

(sec)

10

10

10

10



MASTER GreenPower 600W 400V E40 SLV/UNP


Luminous

Flux Lamp

EM

(lm)

58500

88000

87500

84500

Luminous

Efficacy

Lamp EM

(lm/W)

140

147

144

142

Colour

Temperature

(K)

-

2040

-

2040

Colour

Rendering

Index

(Ra)

20

26

33

33

Chromaticity

Coordinate X

533

-

526

526

Chromaticity

Coordinate Y

432

-

420

420

Operating

Position any any any any


Type

MASTER GreenPower CG T 400W E40 SLV

MASTER GreenPower CG T 400W E40 UNP

MASTER GreenPower CG T 600W E40 SLV

MASTER GreenPower CG T 600W E40 UNP


MASTER GreenPower 600W 400V E40 UNP


ILCOS

ST-400-H/S-E40

ST-400-H/S-E40

ST-600-H/S-E40

ST-600-H/S-E40

ST-600-H/S-E40

ST-600-H/S-E40

ST-600-H/S-E40

EAN code

1 piece

8711500201966

8711500202451

8711500202024

8711500202291

8711500203076

8711500203090

8711500206480


600

500

400

300

200

100

300 400 500 600

SON-T Green Power/GreenPower CG T 400W



% 200

160

I la

120

80 W la

40

V la

0



2 4 6

SON-T Green Power 600W

8 10 t

240 °

270 °

100

300 °

SON-T

330 °

50

700


210 ° 180 ° 150 °

0 °

 nm

30 °

120 °

90 °

60 °

Weight

0.18 kg

0.18 kg

0.182 kg

0.182 kg

0.179 kg

0.179 kg

0.18 kg

240 °

300 °

Qty bulk packing

12

60

12

60

12

60

12

900

750

600

450

300

150

300 400

SON-T Green Power 600W

500

210 ° 180 ° 150 °

270 °

100 50

330 ° 0 °


22.5 cm x 16.9 cm x 31.1 cm

60 cm x 40 cm x 32.5 cm

22.5 cm x 16.9 cm x 31.1 cm

60 cm x 40 cm x 32.5 cm

22.5 cm x 16.9 cm x 31.1 cm

60 cm x 40 cm x 32.5 cm

22.5 cm x 16.9 cm x 31.1 cm

30 °

120 °

90 °

60 °

600


8711500201973

8711500202468

8711500202031

8711500202307

8711500203083

8711500203106

8711500206497

700  nm

EOC

8711500

201966 15

202451 75

202024 15

202291 75

203076 15

203090 75

206480 15

Run-up time

90%

(min)

5

5

5

5


MASTER GreenPower


100

90

80

70

60

50

0 8000 16000

SON-T 100W/150W/250W/400W

24000 32000

Burning hours


100

90

80

70

60

50

0 8000

SON-T 100W/150W/250W/400W

Cap Base

16000 24000 32000

Burning hours


100

90

80

70

60

50

0

SON-T 600W

100

90

80

70

60

50

0

SON-T 600W

8000

8000

16000 24000 32000

Burning hours

16000 24000 32000

Burning hours

E40

40 any

3.54


MASTER GreenPower


MASTER SON-T PIA Plus

SON-T Plus E40

D

SON-T

3.56


Type

MASTER SON-T PIA Plus 50W/220 E27 SLV








●

High Pressure Sodium lamp with clear tubular outer bulb, high output and long reliable lifetime


●


●


●

Robust construction with few welding points is highly vibration- and shock-resistant, further reducing early failures and extending lamp life

●

●

●


“Plus” concept with high efficacy translated into high light output

Completely lead-free lamps


●

Superior technology results in a long and reliable lifetime, high

● lumen maintenance and a reliable ignition over lifetime

High energy efficacy and absence of lead (Pb) makes this a sound

● environmental offer

High luminous efficacy makes this the most energy efficient HPS lamp

Application

●

Road and residential lighting

●

●

Decorative floodlighting, illumination

Industrial area lighting

●

●

Recreational sports facilities indoor and outdoor

Horticultural lighting

Environment

●


●






CMax

156

156

210

210

257

283

283

DMax

38

48

48

38

48

48

47

LNom

102

102

132

132

158

175

174.2

ONom

35

83

126

61

64

42

47


Technical data

Type








Technical data

Type








Light data

Type









Type








Lamp

Current

EM

(A)

3

4.5

5.8

0.75

1

1.2

1.8

Lamp

Wattage

EM

(W)

50.0

70.0

100.0

150.0

250.0

400.0

600

Lamp

Voltage

(V)

100

100

115

100

100

91

90

Voltage

(V)

230

230

230

230

230

230

230

Rated

Lamp

Wattage

250

400

600

100

150

50

70

Dimmable

Yes

Yes

No

Yes

Yes

Yes

Yes

Ignition

Peak

Voltage

(V)

1800

1800

2800

2800

2800

2800

3500

Ignition

Supply

Voltage

(V)

198

198

198

198

198

198

198

Ignition

Time

10

10

10

10

(sec)

5

5

5

Run-up time

90%

(min)

4

4

4

5

5

4

5

Life to

50% failures

(hrs)

28000

28000

32000

32000

32000

32000

28000

Luminous

Flux Lamp

EM

(lm)

4400

6600

10700

17500

33200

56500

90000

Luminous

Efficacy

Lamp EM

(lm/W)

88

91

107

110

128

138

150

Colour

Temperature

2000

2000

2000

2000

(K)

2000

2000

2000

Colour

Rendering

Index

(Ra)

25

25

25

25

25

25

25

Chromaticity

Coordinate X

530

525

524

540

540

535

535

Chromaticity

Coordinate Y

420

425

426

420

420

420

420

Operating

Position any any any any any any any

ILCOS

ST-50-H/S-E27

ST-70-H/S-E27

ST-100-H/S-E40

ST-150-H/S-E40

ST-250-H/E-E40

ST-400-H/E-E40

ST-600-H/S-E40

EAN code

1 piece

8711500192653

8711500192660

8711500192301

8711500192295

8711500179876

8711500179883

8711500197429

Weight

0.047 kg

0.046 kg

0.128 kg

0.142 kg

0.17 kg

0.18 kg

0.177 kg

Qty bulk packing

12

12

12

12

12

12

12


16.6 cm x 13.4 cm x 18.9 cm

16.6 cm x 13.4 cm x 18.9 cm

22.5 cm x 16.9 cm x 24.2 cm

24.2 cm x 16.9 cm x 22.5 cm

22.5 cm x 16.9 cm x 29.3 cm

22.5 cm x 16.9 cm x 31.1 cm

22.5 cm x 16.9 cm x 31.1 cm


8711500193094

8711500193131

8711500192745

8711500192721

8711500182937

8711500182951

8711500197436

EOC

8711500

192653 15

192660 15

192301 15

192295 15

179876 15

179883 15

197429 15




300

250

200

150

100

50

500 300 400

SON-T Plus 50W/70W E27

600 700 � [nm]

300

250

200

150

100

50

300 400 500

SON-T Plus 100W/150W/250W E40

600 700 � [nm]

300

250

200

150

100

50

300 400

SON-T Plus 400W E40



% 140

120

I la

100

W la

80

60

40

20

0

V la

5 10 15

SON-T Plus 50W/70W E27

500

20 t


100

90

80

70

60

50

0 8000 16000

SON-T 50W/70W

600 700 � [nm]

300

250

200

150

100

50

300 400

SON-T Plus 600W E39/E40

500


% 140

I la

120

100 W la

80

60

40 V la

20

0 5 10 15 t

SON-T Plus 100W/150W/250W E40


% 140

I la

120

100

80

W la

60

40

20

0

V la

5 10

SON-T Plus 400W E40

15 20 t

24000 32000

Burning hours

100

90

80

70

60

50

0 8000

SON-T 100W/150W/250W/400W

16000

600 700 � [nm]


% 140

I la

120

100 W la

80

60 V la

40

20

0 5 10 15

SON-T Plus 600W E39/E40

20 t

24000 32000

Burning hours

3.58


100

90

80

70

60

50

0

SON-T 600W

8000 16000 24000 32000

Burning hours


100

90

80

70

60

50

0 8000

SON-T 50W/70W

16000


24000 32000

Burning hours

100

90

80

70

60

50

0 8000

SON-T 100W/150W/250W/400W

16000


210 ° 180 ° 150 °

240 ° 120 °

270 ° 100 50

90 °

24000 32000

Burning hours

210 ° 180 ° 150 °

240 °

270 ° 100 50

120 °

90 °

60 ° 300 ° 60 ° 300 °

SON-T

330 °

Cap Base

0 ° 30 ° 330 ° 0 ° 30 °

100

90

80

70

60

50

0

SON-T 600W


8000 16000 24000 32000

Burning hours

E27

27

E40

40 any


MASTER SON PIA Plus

SON PIA Plus E40

D

SON PIA

3.60



●

High Pressure Sodium lamp with opalized ovoid outer bulb, high output and long reliable lifetime


●


●


●


●

●

●


“Plus” concept with high efficacy translated into high light output



●



High energy efficacy and absence of lead (Pb) makes this a sound

● environmental offer

High luminous efficacy makes this the most energy efficient HPS lamp

Application

●


●

●

Industrial lighting both indoor and outdoor


Environment

● Good environmental choice because of high energy efficiency and

●






Type

MASTER SON PIA Plus 70W/220 I E27 SLV

MASTER SON PIA Plus 100W/220 E40 SLV

MASTER SON PIA Plus 150W/250W/220 E40 SLV


CMax

152

186

227

290

DMax

91

121.5

70

76

MASTER SON PIA Plus

Technical data

Type

MASTER SON PIA Plus 70W/220 I E27

MASTER SON PIA Plus 100W/220 E40




Light data

Type

Lamp

Current

EM

(A)

0.980

1.2

1.8

2.85

4.5

Lamp

Wattage

EM

(W)

71.50

100.0

154

260.0

400.0

Lamp

Voltage

(V)

92

100

100

105

105

Rated

Lamp

Wattage

Dimmable

70

100

150

250

400

Yes

Yes

Yes

Yes

Yes







Type







300

250

200

150

100

50

300 400 500

SON PIA



% 200

160

I la

120

80

W la

40

V la

0



2

SON PIA Plus

4 6 8 10 t

ILCOS

SE-70-H/I-E27

SE-100-H/S-E40

SE-150-H/S-E40

SE-250-H/S-E40

SE-400-H/S-E40

600

Luminous

Flux Lamp

EM

(lm)

5900

10200

17000

31100

55500

700

EAN code

1 piece

8711500204264

8711500182258

8711500182289

8711500193445

8711500193452


210 ° 180 ° 150 °

240 ° 120 °

270 ° 100 50

90 °

60 ° 300 °

SON PIA

330 ° 0 ° 30 °

Luminous

Efficacy

Lamp EM

(lm/W)

82

107

114

120

135

Colour

Temperature

(K)

1900

2000

2000

2000

2000

[nm]

Weight

0.055 kg

0.125 kg

0.156 kg

0.17 kg

0.228 kg

Qty bulk packing

24

12

12

12

12

Ignition

Peak

Voltage

(V)

2800

2800

2800

2800

210 ° 180 ° 150 °

240 °

270 ° 100 50

120 °

90 °

300 ° 60 °

330 ° 0 ° 30 °

Ignition

Supply

Voltage

(V)

198

198

198

198

198

Colour

Rendering

Index

(Ra)

20

25

25

25

25

Chromaticity

Coordinate X

535

-

535

530

525

Chromaticity

Coordinate Y

420

-

420

420

425


45.5 cm x 30.7 cm x 16.8 cm

34.3 cm x 26 cm x 23.1 cm

40 cm x 30.5 cm x 26.9 cm

40.3 cm x 30.5 cm x 26.9 cm

51.9 cm x 39.2 cm x 33.1 cm

Ignition

Time

(sec)

10

10

5

10

Run-up time

90%

(min)

Operating

Position


8711500204271

8711500182265

8711500182296

8711500193469

8711500195937 any any any any any

5

5

4

4

EOC

8711500

204264 30

182258 15

182289 15

193445 15

193452 15

Life to

50% failures

(hrs)

28000

32000

32000

32000

32000


MASTER SON PIA Plus


100

90

80

70

60

50

0 8000 16000

SON PIA 50W/70W


100

90

80

70

60

50

0 8000

SON PIA 50W/70W


16000

24000 32000

Burning hours

100

90

80

70

60

50

0 8000

SON PIA 100W/150W/250W/400W

16000 24000 32000

Burning hours

24000 32000

Burning hours

100

90

80

70

60

50

0 8000

SON PIA 100W/150W/250W/400W

16000 24000 32000

Burning hours any

3.62


MASTER SON PIA Plus


MASTER SON-T PIA Hg-Free

SON-T Hg Free E40

D

Type

MASTER SON-T PIA Hg-Free 100W/221 E40 SLV





●

High Pressure Sodium lamp with clear tubular outer bulb, long reliable lifetime and no Mercury


●


●


●


●

●


Completely mercury (Hg) and lead-free lamps


●



Absence of mercury and lead makes this a environmentally sound offer

Application

●


●

●

●

Decorative floodlighting, illumination



Environment

●

Good environmental choice because of high energy efficiency, long reliable life and mercury free

●

●

●

This product is a Philips Green product





CMax

210

211

257

279

DMax

46

48

47

46

LNom

132

132

158

175

ONom

70

73

82

111

SON-T

3.64



Technical data

Type





Technical data

Type





Light data

Type






Type






300

250

200

150

100

50

300 400 500

SON-T Hg Free 100W/150W/250W E40

600

ILCOS

ST-100-H/E-E40

ST-150-H/E-E40

ST-250-H/E-E40

ST-400-H/E-E40

700

Luminous

Flux Lamp

EM

(lm)

9000

15000

28000

48000

Ignition

Time

(sec)

5

10

10

10

Lamp

Current

EM

(A)

1.24

1.8

3

4.6

EAN code

1 piece

8711500201379

8711500200617

8711500200594

8711500200631

� [nm]

Run-up time

90%

(min)

4

4

5

5

Lamp

Wattage

EM

(W)

100.0

150.0

250

400.0

Luminous

Efficacy

Lamp EM

(lm/W)

88

100

110

120

Colour

Temperature

(K)

2150

2150

2150

2150

Weight

0.095 kg

0.132 kg

0.16 kg

0.176 kg

Life to

50% failures

(hrs)

32000

32000

32000

32000

Lamp

Voltage

(V)

100

98

98

98

Voltage

Qty bulk packing

12

12

12

12

(V)

230

230

230

230

Colour

Rendering

Index

(Ra)

25

25

25

25

Chromaticity

Coordinate X

525

525

516

519

Chromaticity

Coordinate Y

436

436

436

436

300

250

200

150

100

50

300 400

SON-T Hg Free 400W E40

Rated

Lamp

Wattage

100

150

250

400

Dimmable


22.5 cm x 16.9 cm x 24.2 cm

22.5 cm x 16.9 cm x 24.2 cm

22.5 cm x 16.9 cm x 29.3 cm

22.5 cm x 16.9 cm x 31.1 cm

500 600

No

No

No

No

Operating

Position


8711500201386

8711500200624

8711500200600

8711500200648

700

Ignition

Peak

Voltage

(V)

2800

2800

2800

2800 any any any any

� [nm]

EOC

8711500

201379 15

200617 15

200594 15

200631 15

Ignition

Supply

Voltage

(V)

198

198

198

198





% 140

I la

120

100 W la

80

60

40 V la

20

0 5 10 15 t

SON-T Hg Free 100W/150W/250W


% 140

I la

120

100 W la

80

60

40

20

0

V la

5 10 15 20 t

SON-T Hg Free 400W E40


100

90

80

70

60

50

0 8000 16000

SON-T 100W/150W/250W/400W

24000 32000

Burning hours


100

90

80

70

60

50

0 8000

SON-T 100W/150W/250W/400W

16000


210 ° 180 ° 150 °

240 ° 120 °

270 °

100 50

90 °

60 ° 300 °

SON-T

330 °

Cap Base

0 ° 30 °

210 ° 180 ° 150 °

240 °

270 ° 100 50

120 °

90 °

300 ° 60 °

330 ° 0 ° 30 °


24000 32000

Burning hours

E40

40 any

3.66




MASTER SON PIA (Hg-Free)

SON PIA E27

D

SON PIA

3.68



●

High Pressure Sodium lamp with opalized ovoid outer bulb, long reliable lifetime and no Mercury


●


●


●


●

●

●


150 W - 400 W mercury free; 50 W / 70 W filled with sodiummercury amalgam



●



Absence of mercury and lead makes this a environmentally sound offer

Application

●


●

●



Environment

●

Good environmental choice because of high energy efficiency, long

●

●

● reliable life and mercury free

Products are Philips Green product





Type

MASTER SON PIA 50W/70W/220 E27 SLV

MASTER SON PIA Hg Free 150W/250W/221 E40 SLV

MASTER SON PIA Hg Free 400W/221 E40 SLV

CMax

156

227

290

DMax

71

91

121.5


Technical data

Type

MASTER SON PIA 50W/220 E27 SLV





Light data

Type

Lamp

Current

EM

(A)

0.76

0.98

1.8

3

4.6

Lamp

Wattage

EM

(W)

50.0

70.0

150.0

250.0

400.0

Lamp

Voltage

(V)

98

100

90

90

98







Type







300

250

200

150

100

50

300 400 500

SON PIA



% 200

160

I la

120

80

40

W la

V la

0



4 8

SON PIA Hg Free

12 16 20 t

ILCOS

SE-50-H/E-E27

SE-70-H/E-E27

SE-150-H/E-E40

SE-250-H/E-E40

SE-400-H/E-E40

600

Luminous

Flux Lamp

EM

(lm)

3500

5600

14500

27000

48000

700

EAN code

1 piece

8711500201447

8711500201461

8711500200570

8711500200556

8711500200532


% 200

160

I la

120

80

40

W la

0

V la



4 8 12

SON PIA ST 50W/70W

16 20 t

Luminous

Efficacy

Lamp EM

(lm/W)

70

80

97

108

120

Colour

Temperature

(K)

2000

2000

2150

2150

2150

[nm]

Weight

0.051 kg

0.052 kg

0.169 kg

0.18 kg

0.24 kg

Rated

Lamp

Wattage

Dimmable

150

250

50

70

400

No

No

No

No

No

Qty bulk packing

24

12

12

24

12

Ignition

Peak

Voltage

(V)

1800

1800

2800

2800

2800

Ignition

Supply

Voltage

(V)

198

198

198

198

198

Colour

Rendering

Index

(Ra)

25

25

25

25

25

Chromaticity

Coordinate X

540

540

525

516

519

Chromaticity

Coordinate Y

415

415

436

436

436


45.5 cm x 30.7 cm x 16.8 cm

45.5 cm x 30.7 cm x 16.8 cm

40.3 cm x 30.5 cm x 26.9 cm

40.3 cm x 30.5 cm x 26.9 cm

51.9 cm x 39.2 cm x 33.1 cm

Ignition

Time

(sec)

10

10

5

5

10

Operating

Position


8711500201454

8711500201478

8711500200587

8711500200563

8711500200549

Run-up time

90%

(min)

4

5

4

4

5 any any any any any

EOC

8711500

201447 30

201461 30

200570 15

200556 15

200532 15

Life to

50% failures

(hrs)

28000

28000

32000

32000

32000




100

90

80

70

60

50

0 8000 16000

SON PIA 50W/70W


100

90

80

70

60

50

0 8000

SON PIA 50W/70W

16000


210 ° 180 ° 150 °

240 ° 120 °

270 ° 100 50

90 °

24000 32000

Burning hours

24000 32000

Burning hours

210 ° 180 ° 150 °

240 °

270 ° 100 50

120 °

90 °

60 ° 300 ° 60 ° 300 °

SON PIA

330 °

Cap Base

0 ° 30 ° 330 ° 0 ° 30 °

100

90

80

70

60

50

0 8000

SON PIA 100W/150W/250W/400W

16000

100

90

80

70

60

50

0 8000

SON PIA 100W/150W/250W/400W

16000


24000 32000

Burning hours

24000 32000

Burning hours

E27

27

E40

40 any

3.70




SON-T

SON-T E40

Applications

●

For use in road and residential lighting

●

Decorative floodlighting

●

Commercial and industrial applications

●

Recreational sports facilities Outdoor and Indoor

Why choose?

●

Energy efficiency

●

SON-T Pro is a cost-efficient and reliable solution in High Pressure

Sodium, offering good value for money

Technical Features

●

High Pressure Sodium lamp with clear outer bulb

●

●


Robust construction is vibration- and shock-resistant leading to a

● reliable life

Dimming possible with dedicated gear



SON-T

3.72


Type

SON-T 70W

SON-T 100W

SON-T 150W

SON-T 250W

SON-T 400W

SON-T 1000W

C

156

210

211

257

283

390

47

47

46

47

66

D

37

L

102

132

132

158

175

240

O

42

70

87

44

61

153

SON-T

Preferred selection

Product ID

SON-T 70W

SON-T 100W

SON-T 150W

SON-T 250W

SON-T 400W

SON-T 1000W

Product ID

SON-T 70W

SON-T 100W

SON-T 150W

SON-T 250W

SON-T 400W

SON-T 1000W

Product ID

SON-T 70W

SON-T 100W

SON-T 150W

SON-T 250W

SON-T 400W

SON-T 1000W

Lamp

Wattage EM

(W)

70

100

150

250

392

1000

Lamp

Voltage

(V)

90

100

100

100

100

105

E

E

E

E

E

E

Ignitor

Kind

Cap/ Base Packing

Configuration

E27

E40

E40

E40

E40

E40

12

12

12

12

12

4

Colour

Rendering

Index

(R a

)

25

25

25

25

25

25

Colour

Temperature

(K)

2000

2000

2000

2000

2000

2000

Luminous

Flux Lamp

EM

(lm)

6000

9000

15000

28000

45000

130000

Operating

Position

ANY

ANY

ANY

ANY

ANY

ANY

Bulb

Shape

T31

T46

T46

T46

T46

T65

Recommended

Ballast

BSN70L33 TS

-

BSN150L33 TS

BSN250L33 TS

BSN400L33 TS

BSN1000L78

Bulb

Finish

Clear

Clear

Clear

Clear

Clear

Clear

Dimmable

Yes

Yes

-

Yes

Yes

Yes

Net weight per piece

(g)

45

134

136

170

175

404

Lamp.

Current EM (A)

0.98

1.2

1.8

3

4.6

10.6

System

Description

External ignitor

External ignitor

External ignitor

External ignitor

External ignitor

External ignitor


Order

Code

8711500

210 42515

9284 815 00091

210 46315

210 52415

210 56215

210 60945

Luminous

Efficacy Lamp EM

(lm/W)

86

90

100

112

120

130

Luminance

Average EM

(cd/cm 2 )

270

-

300

400

550

650

SON

SON E27

Applications

●

For use in road and residential lighting

●


●


Why choose?

●

Energy efficiency

●

SON Pro is a cost-efficient and reliable solution in High Pressure

Sodium, offering good value for money


●


●

Robust construction is vibration- and shock-resistant leading to a

● reliable life

Dimming possible with dedicated gear

●

Require a ballast and ignitor, except for SON 70W I lamps which have an internal ignitor



SON E27

3.74


Type

SON 70W

SON 150W/250W

SON 400W

C

156

227

290

91

122

D

71

SON


Product ID

SON 70W

SON 70W

SON 150W

SON 250W

SON 400W

Product ID

SON 70W

SON 70W

SON 150W

SON 250W

SON 400W

Product ID

SON 70W

SON 70W

SON 150W

SON 250W

SON 400W

Lamp

Wattage EM

(W)

147

250

70

70

400

Lamp

Voltage

(V)

100

100

90

90

105

E

E

E

E

I

Ignitor

Kind

Cap/ Base Packing

Configuration

E27

E27

E40

E40

E40

24

12

12

24

12

Colour

Rendering

Index

(R a

)

25

25

25

25

25

Colour

Temperature

(K)

2000

2000

2000

2000

2000

Luminous

Flux Lamp

EM

(lm)

5600

5600

14500

27000

48000

Operating

Position

ANY

ANY

ANY

ANY

ANY

Bulb

Shape

B70

B70

BD90

BD90

BD120

Recommended

Ballast

BSN70L33 TS

BSN70L33 TS

BSN150L33 TS

BSN250L33 TS

BSN400L33 TS


(g)

180

175

52

57

240

Bulb

Finish

Coated

Coated

Coated

Coated

Coated

Dimmable

Yes

Yes

Yes

Yes

Yes

Lamp.

Current EM (A)

0.98

0.98

1.8

3

4.45

System

Description

External ignitor

External ignitor

External ignitor

External ignitor

External ignitor

Luminance

Average EM

(cd/cm 2 )

6.6

6.6

19

-

24


Order

Code

8711500

210 24130

9284 806 00092

210 28915

210 38815

210 32615

Luminous

Efficacy Lamp EM

(lm/W)

99

108

80

80

120

Ignition Supply

Voltage min.

(V)

198

198

198

198

198

SON-T Comfort

SON-T


●

High Pressure Sodium lamp with clear tubular outer bulb and a comfortable colour impression


●


●

Warm white colour temperature and acceptable colour rendering to create a pleasant ambience

●

Robust construction is vibration- and shock-resistant leading to a reliable life


●

The ideal balance between colour impression and energy efficacy

Application

●

City centres and residential areas

●

●

●






D

Type

SON-T Comfort 150W/621 E40 SLV



SON-T

3.76


CMax

211

257

283

DMax

47

47

47

LNom

132

158

175

ONom

43

53

59

SON-T Comfort

Technical data

Type

SON-T Comfort 150W

SON-T Comfort 250W

SON-T Comfort 400W

Light data

Type





Type





300

250

200

150

100

50

300 400 500

SON-T


100

90

80

70

60

50

0

SON-T

4000


210 ° 180 ° 150 °

6000

Lamp

Current

EM

(A)

1.82

3.05

4.5

Luminous

Flux Lamp

EM

(lm)

13000

23000

38000

Lamp

Wattage

EM

(W)

150.0

250.0

400.0

Lamp

Voltage

(V)

105

105

100

Rated

Lamp

Wattage

Dimmable

150

250

400

Luminous

Efficacy

Lamp EM

(lm/W)

87

92

95

Colour

Temperature

(K)

2150

2150

2150

No

No

No

Ignition

Peak

Voltage

(V)

2800

2800

2250

Ignition

Supply

Voltage

(V)

198

198

198

Colour

Rendering

Index

(Ra)

65

65

65

Chromaticity

Coordinate X

513

514

510

Chromaticity

Coordinate Y

419

420

415

Ignition

Time

(sec)

5

5

10 any any any

Run-up time

90%

(min)

15

6

15

Operating

Position

STM-150-H/E-E40

STM-250-H/E-E40

STM-400-H/E-E40

8000

600

ILCOS

12000

210 °

EAN code

1 piece

8711500192288

8711500179852

8711500179869

700 [nm]

16000 24000

Burning hours

Weight

0.134 kg

0.166 kg

0.177 kg

Qty bulk packing

12

12

12


24 cm x 16.7 cm x 22.1 cm

22.5 cm x 16.9 cm x 29.3 cm

22.5 cm x 16.9 cm x 31.1 cm



% 200

160 I la

120

80

40

W la



0

V la

2 4 6 8

SON-T


10 t

100

90

80

70

60

50

0 4000 6000 8000

SON-T

Cap Base


8711500192707

8711500183187

8711500182913

12000 16000 24000

Burning hours


EOC

8711500

192288 15

179852 15

179869 15

180 ° 150 °

Life to

50% failures

(hrs)

20000

20000

20000

240 ° 120 ° 240 ° 120 °

270 °

100 50

90 ° 270 ° 100 50

90 °

60 ° 300 ° 60 ° 40 300 °

SON-T

330 ° 0 ° 30 ° 330 ° 0 ° 30 °

E40 any


SON Comfort

SON E40


●

High Pressure Sodium lamp with opalized, ovoid outer bulb and a comfortable colour impression


●


●

Warm white colour temperature and acceptable colour rendering to create a pleasant ambience

●



●

The ideal balance between colour impression and energy efficacy

Application

●

City centres and residential areas

●




D

SON

3.78


Type

SON Comfort 150W/250W/621 E40 SLV

SON Comfort 400W/621 E40 SLV

CMax

227

290

DMax

91

121.5

SON Comfort

Technical data

Type




Light data

Type

Lamp

Current

EM

(A)

1.82

3

4.45

Lamp

Wattage

EM

(W)

150.0

250.0

400.0

Lamp

Voltage

(V)

105

105

105

Rated

Lamp

Wattage

Dimmable

150

250

400

No

No

No

Ignition

Peak

Voltage

(V)

2800

2800

2250

Ignition

Supply

Voltage

(V)

198

198

198

Ignition

Time

(sec)

5

5

10

Run-up time

90%

(min)

15

6

15




Luminous

Flux Lamp

EM

(lm)

12500

22000

37000

Luminous

Efficacy

Lamp EM

(lm/W)

83

88

93

Colour

Temperature

(K)

2150

2150

2150

Colour

Rendering

Index

(Ra)

65

65

65

Chromaticity

Coordinate X

513

513

513

Chromaticity

Coordinate Y

419

419

419

Operating

Position any any any


Type




CRV diagram b* a*

SON-C 250W

ILCOS

SEM-150-H/E-E40

SEM-250-H/E-E40

SEM-400-H/E-E40

EAN code

1 piece

8711500182166

8711500182197

8711500182227


300

250

200

150

100

50

300 400 500

SON

Weight

0.172 kg

0.18 kg

0.24 kg

600

Qty bulk packing

12

12

12

700


40.3 cm x 30.5 cm x 26.9 cm

40.3 cm x 30.5 cm x 26.9 cm

51.9 cm x 39.2 cm x 33.1 cm

[nm]


8711500182173

8711500182203

8711500195944

EOC

8711500

182166 15

182197 15

182227 15



% 200

160

I la

120

80

40

W la



0

V la

2

SON

4 6 8 10 t

SON


210 ° 180 ° 150 °

240 ° 120 ° 240 °

210 ° 180 ° 150 °

120 °


Life to

50% failures

(hrs)

20000

20000

20000

270 ° 100 50

90 ° 270 ° 100 50 90 °

60 ° 300 ° 60 ° 300 °

SON

330 ° 0 ° 30 ° 330 ° 0 ° 30 °

40

E40 any


SON H

SON H E40


●

High Pressure Sodium lamp with opalized outer bulb retrofit for

High Pressure Mercury lamps


●

Direct replacement for mercury lamps as they operate on the same

● control gear

High luminous efficacy

●



●

Instant and cost-effective upgrade of light level and reduction of energy use replacing HPL

Application

●


●


System

●

Require an HPL gear without ignitor



D

SON H

3.80


Type

SON H 68W/220 E27 SLV




CMax

164.4

169

227

290

DMax

91

121.5

71

71

SON H

Technical data

Type





Light data

Type

Lamp

Current

EM

(A)

0.815

1.29

2.2

3.6






Type





ILCOS

SEQ-70-H-E27

SEQ-110-H-E27

SEQ-220-H-E40

SEQ-350-H-E40


300

250

200

150

100

50

300 400 500 600

SON H



% 200

160

I la

120

80

40

W la

V la

0



4

SON H

8 12 16 20 t

Luminous

Flux Lamp

EM

(lm)

5400

10400

20000

34000

EAN code

1 piece

8711500213990

8711500201867

8711500182074

8711500182135

700

Lamp

Wattage

EM

(W)

69

113

220.0

350.0

[nm]

Weight

0.055 kg

0.06 kg

0.17 kg

0.236 kg

Lamp

Voltage

(V)

107

109

120

117

Rated

Lamp

Wattage

68

110

220

350

Dimmable

No

No

No

Ignition

Supply

Voltage

(V)

198

198

190

190


45.6 cm x 30.8 cm x 17 cm

45.6 cm x 30.8 cm x 18.7 cm

40.3 cm x 30.5 cm x 26.9 cm

51.9 cm x 39.2 cm x 33.1 cm

Ignition

Time

(sec)

10

10

10

15

Luminous

Efficacy

Lamp EM

(lm/W)

78

92

91

97

Colour

Temperature

(K)

1810

2000

2000

2000

Colour

Rendering

Index

(Ra)

20

25

25

25

Chromaticity

Coordinate X

554

532

530

525

Chromaticity

Coordinate Y

410

416

410

415

Operating

Position any any any any

Qty bulk packing

24

24

12

12


8711500214171

8711500201874

8711500182081

8711500195913

Run-up time

90%

(min)

5

5

5

5

EOC

8711500

213990 30

201867 30

182074 15

182135 15

Life to

50% failures

(hrs)

28000

20000

20000

20000


SON H


100

90

80

70

60

50

0

SON H 110W

4000 8000 12000 16000 20000 24000 28000 32000

Burning hours


100

90

80

70

60

50

0

SON H 110W

4000 8000 12000 16000 20000 24000 28000 32000

Burning hours

Cap Base

100

90

80

70

60

50

0 4000

SON H 220W/350W

6000 8000 12000 16000 24000

Burning hours

100

90

80

70

60

50

0 4000

SON H 220W/350W


6000 8000 12000 16000 24000

Burning hours

E27

27

E40

40 any

3.82


SON H


MASTER SOX-E

SOX E

C

SOX E

3.84



●

Low Pressure Sodium lamp with improved efficacy


●

Uniform sodium distribution in the discharge tube by means of dimples for a more stable discharge, higher efficacy and better lumen maintenance and lamp life

●

●

Special coating of SOX-E outer tube results in higher lamp efficacy than SOX

Monochromatic yellow colour with non-existent colour rendering


●

Extremely high luminous efficacy makes these the most efficient light sources

Application

●

Road lighting, railway marshalling yards and crossings, airports,

● harbours and docks, quarries, foundries and rolling mills

Security and orientation lighting

System

●

On HF electronic gear SOX-E have even higher efficacy, saving up to

40% (system) energy

Environment

●

Good environmental choice because of highest energy efficiciency

●




Type

MASTER SOX-E 18W BY22d 1SL

MASTER SOX-E 26W BY22d SLV





CMax

216

311

425

528

775

1120

DMax

52

66

66

52

52

66

MASTER SOX-E

Technical data

Type







600

Lamp

Current

EM

(A)

0.35

0.45

0.35

0.62

0.62

0.62

700

Lamp

Wattage

EM

(W)

18.0

27

36.0

65.0

90.0

127

[nm]

Lamp

Voltage

(V)

120

123

57

69

173

250

Light data

Type








Type










ILCOS

LSE-E18-BY22d

LSE-E26-BY22d

LSE-E36-BY22d

LSE-E66-BY22d-/H

LSE-E91-BY22d-/H

LSE-E131-BY22d-/H

LSE-E131-BY22d-/H

LSE-E131-BY22d-/H

LSE-E131-BY22d-/H

Luminous

Flux Lamp

EM

(lm)

1800

3600

6200

10500

17500

26200

EAN code

1 piece

8711500192806

8711500179746

8711500179760

8711500179784

8711500179807

8711500179821

8711500196866

8711500196873

8711500196880

Luminous

Efficacy

Lamp EM

(lm/W)

100

141

163

172

194

206

Operating

Position

Weight

150 gr

225 gr

300 gr

483 gr

717 gr

1033 gr

1033 gr

1033 gr

1033 gr h110 h110 p20 p20 p20 p20

Qty bulk packing

6

6

12

6

6

12

12

12

12


2400

2000

1600

1200

800

400

300 400 500

Rated

Lamp

Wattage

91

131

36

66

18

26

Dimmable

No

No

No

No

No

No


24 cm x 18 cm x 27.5 cm

25 cm x 19 cm x 39 cm

25 cm x 19 cm x 50.5 cm

30 cm x 22.5 cm x 61 cm

30 cm x 22.5 cm x 90 cm

120 cm x 22 cm x 15 cm

120 cm x 22 cm x 15 cm

120 cm x 22 cm x 15 cm

120 cm x 22 cm x 15 cm

Life to

50% failures

(hrs)

18000

18000

18000

18000

18000

18000


8711500193407

8711500182692

8711500182739

8711500182777

8711500182814

8711500599995

8711500194916

8711500194923

8711500194862

SOX E 36W

EOC

8711500

192806 15

179746 15

179760 15

179784 15

179807 15

179821 10

196866 10

196873 10

196880 10


MASTER SOX-E il



% 200

160

V la

120

80

W la

I la

40

0

4



8 12 16 20 t


100

90

80

70

60

50

0 6000 12000

SOX E

18000 24000

Burning hours


100

90

80

70

60

50

0 6000

SOX E

12000


210 ° 180 ° 150 °

240 ° 120 °

270 ° 100 50

90 °

60 ° 300 °

SOX E

330 °

Cap Base

0 ° 30 °

210 ° 180 ° 150 °

240 °

270 ° 100 50

120 °

90 °

300 ° 60 °

330 ° 0 ° 30 °


18000 24000

Burning hours

BY22d

22 h110 p20

3.86


MASTER SOX-E


SOX

SOX


●

Low Pressure Sodium lamp


●

Uniform sodium distribution in the discharge tube by means of

● dimples for a more stable discharge, higher efficacy and better lumen maintenance and lamp life

Monochromatic yellow colour with non-existent colour rendering


●

High luminous efficacy leads to low energy consumption

Application

●

Road lighting, railway marshalling yards and crossings, airports,

● harbours and docks, quarries, foundries and rolling mills


System

●

On HF electronic gear SOX have even higher efficacy, saving up to

40% (system) energy



C

SOX

3.88


Type

SOX 35W BY22d 1SL

SOX 55W BY22d 1SL

SOX 90W BY22d 1SL

SOX 135W BY22d 1SL

SOX 180W BY22d 1SL

CMax

311

425

528

775

1120

DMax

52

66

66

52

66

SOX

Technical data

Type

SOX 35W BY22d 1SL

SOX 55W BY22d 1SL

SOX 90W BY22d 1SL

SOX 135W BY22d 1SL

SOX 180W BY22d 1SL

Light data

Type

Lamp

Wattage

EM

(W)

37

56.0

91.0

135.0

180.0

SOX 35W BY22d 1SL

SOX 55W BY22d 1SL

SOX 90W BY22d 1SL

SOX 135W BY22d 1SL

SOX 180W BY22d 1SL


Type ILCOS

SOX 35W BY22d 1SL

SOX 55W BY22d 1SL

SOX 90W BY22d 1SL

SOX 135W BY22d 1SL

SOX 180W BY22d 1SL

SOX 180W BY22d 1SL

SOX 180W BY22d SLV


2400

2000

1600

1200

800

400

LS-35-BY22d

LS-55-BY22d

LS-90-BY22d-/H

LS-135-BY22d-/H

LS-180-BY22d

LS-180-BY22d

LS-180-BY22d

300 400 500 600

SOX 55W



% 200

160

V la

120

80

W la

I la

40

0

4

SOX



8 12 16 20 t

Luminous

Flux Lamp

EM

(lm)

4550

7800

13700

22600

32000

EAN code

1 piece

8711500179739

8711500179753

8711500179777

8711500179791

8711500179814

8711500599940

8711500179814

700 [nm]

Luminous

Efficacy

Lamp EM

(lm/W)

129

140

152

167

176

Lamp

Voltage

(V)

70

109

112

164

240

Weight

217 gr

300 gr

483 gr

708 gr

1033 gr

1033 gr

1033 gr

Operating

Position

Lamp

Current

(A)

0.6

0.59

0.94

0.95

0.91

h110 h110 p20 p20 p20

Qty bulk packing

12

12

6

6

12

12

9

Rated

Lamp

Wattage

90

135

35

55

180

Dimmable

No

No

No

No

No


25 cm x 19 cm x 39 cm

25 cm x 19 cm x 50.5 cm

30 cm x 22.5 cm x 61 cm

30 cm x 22.5 cm x 90 cm

120 cm x 22 cm x 15 cm

120 cm x 22 cm x 15 cm

120 cm x 30 cm x 22.5 cm

Life to

50% failures

(hrs)

18000

18000

18000

18000

18000


8711500182678

8711500182715

8711500182753

8711500182791

8711500600004

8711500599957

8711500182838


EOC

8711500

179739 15

179753 15

179777 15

179791 15

179814 10

599940 10

179814 37

3.89

SOX


100

90

80

70

60

50

0 6000 12000

SOX


18000 24000

Burning hours


100

90

80

70

60

50

0 6000

SOX

12000 18000 24000

Burning hours

BY22d

22 h110 p20

3.90


SOX


HPL Comfort

HPL E26/E27


●

High pressure mercury lamp with improved colour properties and light output


●

Equipped with one or two auxiliary electrodes to ensure quick and

● reliable ignition

Special internal coating, providing warm white light with increased

● colour rendering

Higher efficacy than standard HPL


●

Creates a comfortable atmosphere at limited investment

●

High safety level thanks high light output

Application

●

Public roads and residential areas, factories, transport sector and industrial area lighting



D

HPL E26/E27/E40

3.92


Type

HPL Comfort 50W/534 E27 SG SLV



HPL Comfort 250W E40 HG CRP


CMax

130

155

173

226

286

DMax

76

91

56

71

121.5

HPL Comfort

Technical data

Type






Light data

Type







Type






CRV diagram b*

ILCOS

QE-50/35/3-H-E27

QE-80/35/3-H-E27

QE-125/34/3-H-E27

QE-250/33/3-H-E40

QE-400/35/3-H-E40

Luminous

Flux Lamp

EM

(lm)

1800

3600

6200

14200

24200 b*

Lamp

Current

EM

(A)

0.61

0.8

1.15

2.13

3.25

EAN code

1 piece

8711500180872

8711500180902

8711500180995

8711500181022

8711500181053

Lamp

Wattage

EM

(W)

50.0

80.0

125.0

250.0

400.0

Luminous

Efficacy

Lamp EM

(lm/W)

36

45

49.5

57

61

Colour

Designation

White

White

White

White

White

Colour

Temperature

(K)

3400

3400

3400

3300

3500

Weight

0.045 kg

0.05 kg

0.07 kg

0.198 kg

0.253 kg

Lamp

Voltage

(V)

95

115

125

135

140

Qty bulk packing

24

24

24

12

6

Rated

Lamp

Wattage

125

250

50

80

400 b*

Dimmable

No

No

No

No

No


24.5 cm x 18.5 cm x 27 cm

34 cm x 26.8 cm x 33.4 cm

48 cm x 32.4 cm x 19.5 cm

40.5 cm x 30.5 cm x 25.8 cm

38.4 cm x 25.9 cm x 33.9 cm

Ignition

Supply

Voltage

(V)

180

180

180

180

180

Colour

Rendering

Index

(Ra)

58

57

55

51

47

Chromaticity

Coordinate X

405

403

408

419

413

Chromaticity

Coordinate Y

383

380

385

392

392


8711500194077

8711500180919

8711500181008

8711500181039

8711500181060

Life to

50% failures

(hrs)

16000

16000

16000

16000

20000

Operating

Position

EOC

8711500

180872 30

180902 30

180995 30

181022 15

181053 10 any any any any any a*

HPL-C 80W a*

HPL-C 400W a*

HPL-C 125W

HPL Comfort 80W


600

500

400

300

200

100

300 400 500

HPL Comfort

HPL Comfort 400W

600 700 [nm]

HPL Comfort 50W/125W/250W


HPL Comfort



% 200

160 I la

120

80

HPL

40

W la

0

V la



2 4 6 8 10 t


100

90

80

70

60

50

0 4000 8000

HPL 50W/80W/125W/250W/400W

12000 16000 20000

Burning hours


100

90

80

70

60

50

0 4000 8000

HPL 50W/80W/125W/250W/400W

12000 16000 20000

Burning hours


210 ° 180 ° 150 °

240 ° 120 °

270 °

100 50

90 °

60 ° 300 °

330 ° 0 °

HPL Comfort 250W

Cap Base

30 °

210 ° 180 ° 150 °

240 °

270 °

100 50

120 °

90 °

300 ° 60 °

330 ° 0 ° 30 °


E27

27

E40

40 any

3.94


HPL Comfort


HPL-N Standard

HPL E40

Burning position

Universal

HPL-N

3.96


Type

HPL-N 50W

HPL-N 80W

HPL-N 125W

HPL-N 250W

HPL-N 400W

Applications

●

All outdoor applications, factories, transport sector and industrial area lighting

Why choose?

●

Low initial costs (higher lifetime costs)


●

Standard High Pressure Mercury lamp

●

Equipped with 1 electrode to ensure quick and reliable ignition

●

Single-ended gas-filled glass bulb (HG-SG) with a quartz mercury

● vapour discharge tube

Internally coated ovoid outer bulb, providing a cool, bluish white light with reasonable colour qualities



C

129

154

172

227

289

90

121

70

75

55

D

HPL-N Standard


Product ID

HPL-N 50W/542

HPL-N 80W/542

HPL-N 125W/542

HPL-N 250W/542

HPL-N 400W/542

Product ID

HPL-N 50W/542

HPL-N 80W/542

HPL-N 125W/542

HPL-N 250W/542

HPL-N 400W/542

Product ID

HPL-N 50W/542

HPL-N 80W/542

HPL-N 125W/542

HPL-N 250W/542

HPL-N 400W/542

Lamp

Voltage

(V)

95

115

125

135

140

Cap/ Base Packing

Configuration

E27

E27

E27

E40

E40

24

12

6

24

24

Colour

Rendering

Index

(R a

)

49

45

45

48

46

Colour

Temperature

(K)

4200

4200

4100

4100

3900

Lamp.

Current EM (A)

0.61

0.8

1.15

2.1

3.25

Recommended

Ballast

BHL50L202

BHL80L202

BHL125L202

BHL250L02

??

Bulb

Finish

Coated

Coated

Coated

Coated

Coated

Luminous

Efficacy Lamp EM

(lm/W)

36

44.5

50

51

55

Luminous

Flux Lamp

EM

(lm)

1800

3700

6200

12700

22000


(g)

63

184

45

57

??

Lamp

Wattage EM

(W)

125

250

50

84

400

Operating

Position

ANY

ANY

ANY

ANY

ANY

Order

Code

9280 505 07396

9280 510 07396

9280 520 07396

9280 530 07496

9280 535 07496

Colour

Designation

Cool White

Cool White

Cool White

Cool White

??

Soft Glass/

Hard Glass

SG

SG

SG

HG

HG


ML High Pressure Mercury

ML E27

ML E27/E40

ML B22

3.98


Type

160W B22

100W E27

160W E27

250W E27

250W E40

500W E40

Type

160W B22

100W E27

160W E27

250W E27

250W E40

500W E40

Applications

●

Public outdoor lighting, car parks, workshops, garages and shops

Why choose?

●

Direct retrofit for incandescent lamps

●

Higher efficacy and lifetime than incandescent


●

High-pressure mercury tube in series with a tungsten filament

●

Runs on mains voltage without additional gear

●

●

●

Combines a continuous spectrum from the incandescent source and a line spectrum from the high-pressure mercury source

It is recommended to protect ML against water splashes

ML lamps are not dimmable



C

165

154

172

216

226

289

90

90

70

75

120

75

D

C

165

154

172

216

226

289

90

90

70

75

120

75

D

Universal

Burning position Burning position Burning position

ML 100 W ML 160 W ML 250 W ML 500 W

ML High Pressure Mercury

ML100W

ML160W

ML160W

ML250W

ML250W

ML250W

ML500W

ML500W


Product ID

ML100W

ML160W

ML160W

ML250W

ML250W

ML250W

ML500W

Product ID

220-230V

220-230V

220-230V

225-235V

220-230V

220-230V

220-230V

225-235V lamp

Base

Packaging

Configuration

E40

E40

E40

E27

B22

E27

E27

12

12

6

24

12

24

24

Soft Glass/

Hard glass

HG

SG

HG

SG

SG

SG

SG

Colour

Rendering

Index (R a

)

72

65

65

65

65

65

48

Voltage Bulb

Finish coated coated coated coated coated coated coated coated

Lamp Current

EM (A)

1.2

1.2

2.3

2.3

0.46

0.76

0.76

1.2

Luminous Efficacy lamp EM

(Lm/W)

26

26

21

21

10.5

19

19

21

Colour

Temperature

(K)

3300

3600

3600

3400

3400

3400

3700


(g)

184

184

230

230

61

184

52

64

Luminous flux lamp EM

(lm)

1100

3150

3150

5400

5400

5400

13000

Order Code

9280 900 57296

9286 010 11401

9286 010 08988

9280 960 56898

9280 962 57296

9286 010 09288

9280 970 57796

Ignition Supply

Voltage min. (V)

180

180

180

180

180

180

180

180


HID Control Gear

The Philips HID electronic gear range was designed for total compatibility with

Philips HID lamps.

Philips is leader in the field of electronic technology and we have applied this knowledge to our developments of control gear for lighting products. Each lamp and gear combination requires extensive life testing before being released as a complete system. The result is an optimal light performance.

Our products are rapidly gaining years of proven reliability in running HID lamps, even in extreme outdoor environments. Our portfolio includes products to operate Low Pressure Sodium, High Pressure Sodium, Metal Halide, Compact

HID, and CosmoPolis gear.

Electronic HID gear

Many of the latest lamps can only be operated on modern electronic control gear. The use of electronic gear is generally advised for most lamp types because of the many advantages it brings to our end users

• High system efficiency to save energy

• Lower maintenance costs due to enhanced lumen maintenance and practical lamp life

• Compact size and low weight provide design flexibility and easy installation

• Constant lamp power; mains voltage fluctuations do not affect light output and give maximum lamp life

• No power factor correction needed so no capacitors to fail further reducing maintenance costs.

• Only one component to simplify installation and servicing.

• Above all, an electronic installation is future proofed, ready for the addition of centralised control systems.

• Electronic outdoor gear designed to resist physical stress (vibrations) and aggressive air contaminations (dust, moisture, etc)

HID Control Gear


MASTERColour

New

3.102


Besides electronics a broad selection of electromagnetic gear is offered for wide range of lamp types and powers from 35W up to 2000W. You can rely on the experience of Philips and the fact that all Philips lamps are fully released that performance of Philips lamps are best on Philips gear.

Electromagnetic HID gear

Depending on the specific application and/or economic considerations, Philips can supply two types of electromagnetic ballasts; Heavy Duty and Basic gear types.

Heavy Duty gear is fully encapsulated and have a special protected bottom-plate for humid or aggressive environment conditions or were extra long lifetime and high reliability is needed.

HID-Basic gear is impregnated for general use in enclosed applications and should not be exposed to humid environments. All electromagnetic gear has been designed for a problem-free lifetime of 10 years continuous operation.

For both MH and high-pressure Sodium gear Philips offers conventional ballasts with internal thermal protection. These types can be recognised by the TS indication.

For the whole range of lamps, a full range of electronic ignitors is offered. Philips prefers and advice customers to use the so-called by Philips developed semi-parallel ignitors (also called impulser type). Together with the gear these ignitors induces ignition-pulses which takes care for reliable lamp-ignition under all conditions for both new and old lamps. The advances of the semi-parallel systems is that gear can be installed remotely (typically 20 meter between gear and lamp is possible). Furthermore has the system much lower watt losses and the ignitor is not in the lamp-current leads and thereby becomes very reliable.

Next step to reliability are the digital ignitors, these ignitor-types detect faulty lamps in an early stage and prevent cycling and unnecessary stress on the system, for CDM lamps these ignitors are obligatory.

Philips gear is designed for lowest watt losses and for ease of use tapping possibilities to select mains-voltages 230/240V, 50Hz and 220/230V, to limit the tables in this OEM-guide only

230/240V types are given.

HID Control Gear


HID-PrimaVision SON and CDO

HID-PV


●

Compact, one-piece, electronic drivers for high-pressure sodium

(SON) lamps and metal halide (CDO) lamps

Features and Benefits

●

Lamp power independent of lamp life and mains voltage 203-254V

●

Low-frequency, electronic gear for stable, flicker-free lamp operation; increases lamp life by 20 – 30% depending on application

●

●

Self-stopping facility prevents cycling of old lamps

Full protection of driver and installation against fault conditions such as overtemperature and end of lamp life

●

●

●

Suitable for use in outdoor luminaires

Cage clamp terminal connections with push-button release

Simple installation and cabling

Applications

●

Road / tunnel lighting

●

●

Residential lighting

Indoor and outdoor applications, recommended outdoor luminaire classification > IP 23

Quality

Philips Quality assures optimum quality regarding:

●

System supplier: As manufacturers of lamps and electronic control gear, Philips ensures that, from the earliest development stage,

● optimum lamp/driver performance is maintained.

European standards: Philips HID electronic drivers comply with all relevant international rules and regulations.

Compliances and approvals

Safety

Performance

RFI

Harmonics

EMC immunity

Approval marking

CE-marking

Environmental standard

Recommended lamp page 3.170

EN 61347-2-1/2-3/2-9

EN 60927 / EN 60929

EN 55015 / EN 55022

EN 61000-3-2

EN 61547

KEMA/VDE

ISO 14001 www.philips.com/OEM

3.104


A2 Type

HID-PrimaVision SON/CDO


A1Nom

150.0

A2Nom

134.0

A3Nom

136.0

B1Nom

90.0

B2Nom

70.0

C1Nom D1Nom

40.0

4.5

A3

HID-PV

Inrush current

Type

A1

HID-P 70 /S SON/CDO 220-240V 50/60Hz

HID-P 100/150 /S SON/CDO 220-240V 50/60Hz

Electrical data

Type Number of

Lamps

(x)

1

1

1

HID-P 70 /S SON/CDO 220-240V




Type

HID-P 70 /S SON/CDO 220-240V 50/60Hz

HID-P 100 /S SON/CDO 220-240V 50/60Hz

HID-P 150 /S SON/CDO 220-240V 50/60Hz

Maximum gear number on MCB

(x)

8

8

Rated

Gear-

Lamp

Power

70

100

150

EAN code

1 piece

8711500930248

8711500928986

8711500929006

Line

Frequency

(Hz)

50/60

50/60

50/60

Inrush current

Peak

(A)

35

50

Weight

0.725 kg

0.725 kg

0.725 kg

Line

Voltage

(V)

220-240

220-240

220-240

Inrush current

Width

(ms)

0.5

0.50

Qty bulk packing

10

10

10

T-case life

(ºC)

90

90

90

T-case maximum

(ºC)

100

100

100


39.8 cm x 16 cm x 11.1 cm

39.8 cm x 16 cm x 11.1 cm

39.8 cm x 16 cm x 11.1 cm

T-ambient

50

50

50


8711500930255

8711500928993

8711500929013

Ignition

Voltage

(kV)

4.5

4.50

4.50

Cable-Cap outputwires mutual

(pF)

120

120

120

EOC

8711500

930248 30

928986 30

929006 30



Electrical installation notes

Mains operation

Rated mains voltage

With tolerances for performance

+6%-8

With tolerances for operation

Mains frequency

Power factor

Earth leakage current

Overvoltage protection

220 - 240 V

203 - 254 V

180 - 264 V

50/60 Hz

> 0.98

< 0.5 mA per driver

48 hrs at 325 Vac

2 hrs at 366 Vac

5 min. at 400 Vac

Lamp operation

Operation frequency (typical)

Ignition voltage 100/150W

70W

Cable capacity

SON

CDO

Air and creepage distance from any

125 Hz

3 - 4 kV

2 - 2.5 kV

Max. 1 nF

Max. 200 pF

> 4 mm

(metal) part that may become live, to earthed environment (class I) or test finger (class II)

Notes:

1. With three-phase mains supply, neutral should never be disconnected; otherwise circuitry could be damaged.

2. For proper EMC, wiring inside luminaire should be as straight and as short as possible; mains wires should not run parallel to lamp wires.

3. Driver should be mounted in luminaire > min IP 23.

4. Thermo-protected circuit incorporates self-resetting facility; ignition attempts stop after 7 min.; mains supply must be switched off and on to reset driver.

5. Automatic restart after lamp replacement or voltage dip, lamp may take up to 18 min. to restart.

6. Insulation resistance test: 500 Vdc from Line/Neutral to Earth (not between Line and Neutral). Ensure that the Neutral is reconnected again after abovementioned test is carried out and before the installation is put into operation.

B

C

C

L, I

Inrush current

Conversion table for max. quantities of drivers on other types of

Miniature Circuit Breaker

MCB type Rating Relative number of drivers

B 16 A

10 A

16 A

10 A

16 A

100% (see table above)

63%

170%

104%

108%

L, I

G, U, II

G, U, II

K, III

10 A

16 A

10 A

16 A

10 A

65%

212%

127%

254%

154% K, III

Notes:

1. Data is based on a mains supply with an impedance of 400 mΩ

(equal to 15 m cable of 2.5 mm 2 and other 20 m to the middle of the power distribution), under worst case conditions. With an impedance of 800 mΩ the number of drivers can be increased by 10%.

2. Measurements will be verified in real installations; therefore data are subject to change.

3. In some cases the maximum number of drivers is not determined by the MCB but by the maximum electrical load of the installation.

4. Note that the maximum number of drivers is given when these are all switched on at the same moment, i.e. by a wall switch.

5. Measurements were carried out on single-pole MCB’s. For multipole MCB’s it is advisable to reduce the number of drivers by 20%.

6. The maximum number of drivers which can be connected to one

Residual Current Detector of 30 mA is 30.

Mechanical installation notes

Wire cross-section:

On the mains side 0.75…2.5 mm 2

On the lamp side 0.75…2.5 mm 2 advised rating: Uo/U

= 250/250V advised rating: Uo/U

= 250/250V

Strip length 6 mm

HID-PV

3.106




HID-DynaVision SON and CDO

HID-DV


●

Compact, one-piece, electronic dimming driver for built-in or standalone applications with high-pressure sodium (SON) and metal halide lamps (CDO)


●

1-10V input for dim-control signal

●

●

Lamp power independent of lamp life and mains voltage 203-254V

Low-frequency, electronic, dimmable gear for stable, flicker-free lamp

● operation; increases lamp life by 20 – 30% depending on application

SON lamps can be dimmed between 100 - 35% of power (100 - 20%

●

●

●

●

●

● light output)

CDO lamps can be dimmed between 100 - 60% of power (100 - 50% light output)






Applications

●


●

●



Quality


●

●

System supplier: As manufacturers of lamps and electronic control gear, Philips ensures that, from the earliest development stage, optimum lamp/driver performance is maintained.



Safety

Performance

RFI

Harmonics

EMC immunity

Approval marking

CE-marking



EN 61347-2-1/2-3/2-9

EN 60927 / EN 60929

EN 55015 / EN 55022

EN 61000-3-2

EN 61547

KEMA/VDE


3.108


A2


Type

HID-DynaVision 1-10V SON/CDO

A1Nom

150.0

A2Nom

134.0

A3Nom

136.0

B1Nom

90.0

B2Nom

70.0

C1Nom D1Nom

40.0

4.5

A3

HID-DV

Inrush current

Type

A1

HID-D 1-10V 100/150 SON/CDO

HID-D 1-10V 70 SON/CDO


(x)

8

12

Inrush current

Peak

(A)

50

35

Inrush current

Width

(ms)

0.5

0.5

Electrical data

Type

HID-D 1-10V 100 /S CDO 220-240V

HID-D 1-10V 100 /S SON 220-240V

HID-D 1-10V 150 /S CDO 220-240V

HID-D 1-10V 150 /S SON 220-240V

HID-D 1-10V 70 /S CDO 220-240V

HID-D 1-10V 70 /S SON 220-240V

Number of

Lamps

(x)

1

1

1

1

1

1

Rated

Gear-

Lamp

Power

100

100

150

150

70

70


Type Weight

HID-D 1-10V 100 /S CDO 220-240V 50/60Hz

HID-D 1-10V 100 /S SON 220-240V 50/60Hz

HID-D 1-10V 150 /S CDO 220-240V 50/60Hz

HID-D 1-10V 150 /S SON 220-240V 50/60Hz

HID-D 1-10V 70 /S CDO 220-240V 50/60Hz

HID-D 1-10V 70 /S SON 220-240V 50/60Hz


Mains operation

Rated mains voltage


+6%-8%


Mains frequency

Power factor 100% power

Power factor 35%, SON, 60%,

CDO, power



220 - 240 V

203 - 254 V

180 - 264 V

50/60 Hz

> 0.98

> 0.93

< 0,5 mA per driver

48 hrs at 325 Vac

2 hrs at 366 Vac

5 min. at 400 Vac

0.725 kg

0.725 kg

0.725 kg

0.725 kg

0.725 kg

0.725 kg

Line

Frequency

(Hz)

50/60

50/60

50/60

50/60

50/60

50/60

Qty bulk packing

10

10

10

10

10

10

Line

Voltage

(V)

220-240

220-240

220-240

220-240

220-240

220-240

T-case life

90

90

90

90

(ºC)

90

90


39.8 cm x 16 cm x 11.1 cm

39.8 cm x 16 cm x 11.1 cm

39.8 cm x 16 cm x 11.1 cm

39.8 cm x 16 cm x 11.1 cm

39.8 cm x 16 cm x 11.1 cm

39.8 cm x 16 cm x 11.1 cm

T-case maximum

(ºC)

100

100

100

100

100

100

T-ambient

Lamp operation


Ignition voltage

Cable capacity

SON

CDO



125 Hz

3 - 4 kV

Max. 1 nF

Max. 200 pF

> 4 mm

50

50

45

45

50

50


8711500931337

8711500749062

8711500538109

8711500538086

8711500931351

8711500927330

Ignition

Voltage

(kV)

4.00

4.00

4.00

4.00

2.50

2.50


(pF)

200

1000

200

1000

200

1000

EOC

8711500

931320 30

749055 30

538093 30

538079 30

931344 30

927323 30



Notes:



3. Driver should be mounted in luminaire > min IP 23.

4. Thermo-protected circuit incorporates self-resetting facility; ignition attempts stop after 7 min.; mains supply must be switched off and on to reset driver.


Control Characteristics

Control input

Control potentiometer (to be connected on 1-10V input)

1-10V

0-100 kΩ

Input is protected against mains voltage connection

Dimming fading rates are implemented to guarantee optimal lamp

Behaviour for SON Lamps:

Run up time before dimming*

Fade down time** (100%-20%)

Fade up time** (20%-100%)

Power indication

Corresponding light level (see

5 minutes

< 1.5 minutes

< 1 minute

35 - 100%

20% - 100% graph)

Behaviour for CDO Lamps:

Run up time before dimming* 10 minutes



Power indication

Regulating light level (see graph)

< 1.5 minutes

< 1 minute

60 - 100%

50% - 100%

* EMC attention should be given with cable > 3 mtr.

** Run-up time, and fading down/up rates are determined to guarantee reliable lamp operations.

B

C

C

L, I

Inrush current




B 16 A

10 A

16 A

10 A

16 A


63%

170%

104%

108%

L, I

G, U, II

G, U, II

K, III

On the lamp side

10 A

16 A

10 A

16 A

10 A



Wire cross-section:


0.75…2.5 mm 2

65%

212%

127%

254%

154% K, III

Notes:


(equal to 15 m cable of 2.5 mm 2 and other 20 m to the middle of the power distribution), under worst case conditions. With an impedance of 800 mΩ the number of driver can be increased by 10%.





6. The maximum number of drivers which can be connected to one advised rating: Uo/U


= 250/250V

Strip length 6 mm

HID-DV 1-10V HID-DV 1-10V

3.110




HID-DynaVision DALI SON and CDO

HID-DV


●

Compact, one-piece, electronic dimming driver for built-in or stand-

● alone applications with high-pressure sodium (SON) and metal halide lamps (CDO)

Digital DALI interface to communicate with and program the driver


●

DALI interface enables two way communication

●

●

Lamp power independent of lamp life and mains-voltage 203-254V

Low-frequency, electronic, dimmable gear for stable, flicker-free lamp operation; increases lamp life by 20 – 30% depending on application

●

●

●

●

●

●

●

●

SON lamps can be dimmed between 100% - 35% of power (100 - 20% light output)

CDO lamps can be dimmed between 100 - 60% of power (100 - 50% light output)






Can operate SDW 100W lamps but only 100% power (no dimming possible)

Applications

●


●

●



Quality


●





Safety

Performance

RFI

Harmonics

EMC immunity

Approval marking

CE-marking


EN 61347-2-1/2-3/2-9

EN 60927 / EN 60929

EN 55015 / EN 5 5022

EN 61000-3-2

EN 61547

KEMA/VDE

ISO 14001



3.112


A2 Type

HID-DynaVision DALI


A1Nom

150.0

A2Nom

134.0

A3Nom

136.0

B1Nom

90.0

B2Nom

70.0

C1Nom D1Nom

40.0

4.5

A3

HID-DV

Inrush current

Type

A1


(x)

6

Inrush current

Peak

(A)

50

Inrush current

Width

(ms)

0.45

HID-D DALI 100-150 /S CDO/SON/SDW

Electrical data

Type Number of

Lamps

(x)

1 HID-D DALI 100-150 /S CDO/SON/SDW


Type

HID-D DALI 100-150 /S CDO/SON/SDW

EAN code

1 piece

8711500928733


Mains operation

Rated mains voltage


+6%-8%


Mains frequency





220-240 V

203-254 V

180-264 V

50/60 Hz

>0.98

>0.93

<0.2 mA per driver

48 hrs at 325 Vac

2 hrs at 366 Vac

5 min. at 400 Vac

Lamp operation


Ignition voltage

Cable capacity

SON-100-150W lamps (2.7 kV)

CDO-lamps (3.3 kV)



125 Hz

3-4 kV

Max. 1 nF

Max. 0.5 nF

>4 mm

Rated

Gear-

Lamp

Power

100-150

Line

Frequency

(Hz)

50/60

Weight

0.725 kg

Line

Voltage

(V)

220-240

Qty bulk packing

10

T-case life

(ºC)

90

T-case maximum

(ºC)

100

T-ambient

45


39.8 cm x 16 cm x 11.1 cm


8711500928740

Ignition

Voltage

(kV)

4.00


(pF)

1000

EOC

8711500

928733 30

Notes:



3. Driver should be mounted in luminaire >min IP 23.

4. Thermo-protected circuit incorporates self-resetting facility; ignition attempts stop after seven minutes; mains supply must be switched off and on to reset driver.




Control characteristics

Control input DALI

Input is protected against mains voltage connection

Dimming fading rates are implemented to guarantee optimal lamp

Behaviour for SON Lamps:




Power indication

Corresponding light level (see graph)

5 minutes

< 1.5 minutes

< 1 minute

35 - 100%

20% - 100%

Behaviour for CDO Lamps:




Power indication

Regulating light level (see graph)

10 minutes

< 1.5 minutes

< 1 minute

60 - 100%

50% - 100%

* EMC attention should be given with cable > 3 mtr.

** Run-up time, and fading down/up rates are determined to guarantee reliable lamp operations.

Notes:


(equal to 15 m cable of 2.5 mm 2 and other 20 m to the middle of the power distribution), under worst case conditions. With an impedance of 800 mΩ the number of drivers can be increased by 10%.





6. The maximum number of drivers which can be connected to one



Wire cross-section:


On the lamp side 0.75…2.5 mm 2 advised rating: Uo/U


= 250/250V

C

C

L, I

L, I

G, U, II

G, U, II

K, III

K, III

Inrush current




B

B

16 A

10 A


63%

16 A

10 A

16 A

10 A

16 A

10 A

16 A

10 A

170%

104%

108%

65%

212%

127%

254%

154%

Strip length 6 mm

HID-DV DALI HID-DV DALI

3.114




HID-EXC for SOX lamps

EXC


●

One-piece, compact, lightweight high-frequency electronic driver


●

Replaces electromagnetic gear, ignitor and capacitor

●

Provides equivalent light output at up to 36% lower energy consumption

●

●

●

One multi-voltage unit gives constant light output at mains voltages between approximately 200 and 255 V

Slim cross-section and light weight facilitate luminaire design

Single-insert contacts

● Simple installation and cabling

Applications

●

Public lighting outdoor, e.g. road, residential, tunnels

●

Climatic suitability: restricted to built-in situations where relative humidity is limited (luminaire classification min. IP 54)

Quality


●





Safety

Performance

RFI

Harmonics

EMC immunity

Approval marking

CE-marking



EN 61347-2-1/2-3/2-9

EN 60927 / EN 60929

EN 55015 / EN 55022

EN 61000-3-2

EN 61547

KEMA/VDE


3.116


A2

Type

EXC 35/36/55/66 SOX(-E)

EXC 91 SOX-E

HID-EXC for SOX lamps

A1Nom

280.0

335.0

A2Nom

265.0

325.0

B1Nom

39.0

39.0

C1Nom D1Nom

28.0

28.0

4.2

4.2

EXC

Inrush current

Type

A1

EXC 35/36 SOX(-E)

EXC 55/66 SOX(-E)

EXC 91 SOX-E

Inrush current

Peak

(A)

30

40

50

Inrush current

Width

(ms)

0.15

0.15

0.22

Electrical data

Type

EXC 35 SOX 220-240V 50/60Hz

EXC 36 SOX-E 220-240V 50/60Hz

EXC 55 SOX 220-240V 50/60Hz

EXC 66 SOX-E 220-240V 50/60Hz

EXC 91 SOX-E 220-240V 50/60Hz

Number of

Lamps

(x)

1

1

1

1

1

Rated

Gear-

Lamp

Power

35

66

91

36

55


Type

EXC 35 SOX 220-240V 50/60Hz

EXC 36 SOX-E 220-240V 50/60Hz

EXC 55 SOX 220-240V 50/60Hz

EXC 66 SOX-E 220-240V 50/60Hz

EXC 91 SOX-E 220-240V 50/60Hz

Weight

0.266 kg

0.267 kg

0.289 kg

0.289 kg

0.333 kg

Qty bulk packing

25

25

25

25

10


Note:

In order to reset stop circuit of electronic driver, mains supply must be switched off for ten seconds when replacing defective lamp.

Power losses gear

(W)

4

5

7

4

4

Line

Frequency

(Hz)

50/60

50/60

50/60

50/60

50/60

Line

Voltage

(V)

220-240

220-240

220-240

220-240

220-240


31.3 cm x 22.5 cm x 21.4 cm

31.3 cm x 22.5 cm x 21.4 cm

31.3 cm x 22.5 cm x 21.4 cm

31.3 cm x 22.5 cm x 21.4 cm

37.6 cm x 20.6 cm x 7.6 cm

T-case life

(ºC)

65

65

65

65

65

T-case maximum

(ºC)

65

65

65

65

65

T-ambient

50

50

50

50

50


(nF)

1

0.5

2

2

1


8711500062390

8711500062413

8711500062437

8711500062451

8711500741097

EOC

8711500

062383 30

062406 30

062420 30

062444 30

741080 30

EXC


HID-PrimaVision CPO-TW Xtreme

HID-PVXT45


●

Compact, robust, outdoor, one-piece, electronic gears for

CosmoPolis White (CPO-TW) lamps


●

Single easily-installed, self-contained component

●

●

High system efficiency – up to 92%

Xtreme long lifetime gear: 60,000 hours 95% survival rate (or

●

80,000 hours with 90% survival rate) at nominal temperature

Peak voltage protection safeguards the lamp; surge protection safeguards the gear (differential mode/common mode 2kV/4kV)

●

●

●

●

●

●

●

●

Full lightning protection (10kV L/N to GND)

Guaranteed system performance at all mains voltages from 198-

254 V

Double insulated so easy to use in Class 2 applications

Stable, flicker-free lamp operation


Size suitable for both luminaire and pole mounting and also for retrofit installations (same footprint as electromagnetic systems)

Cage clamp terminal connections with pushbutton release

Compact and environment-friendly system

Applications

●

Road and street lighting

●

●


City beautification

●


Environment

●

Philips Green product with high efficacy minimises environmental

●

● impact and CO

2

RoHS compliant emission

ENEC or KEMA/VDE approved

Quality


●


● optimum lamp/gear performance is maintained

European standards: Philips HID electronic gears comply with all relevant international rules and regulations



3.118


A2

HID-PrimaVision CPO-TW Xtreme

Type

HID-PrimaVision Xtreme 45/60 /S CPO-TW

HID-PrimaVision Xtreme 90/140 /S CPO-TW

A1Nom

135.0

150.0

A2Nom

125.7

140.7

B1Nom

65.0

65.0

B2Nom

46.8

46.8

C1Nom

65.0

65.0

D1Nom

4.8

4.8

A1

HID-PV Xt

Inrush current

Type

HID-PrimaVision Xtreme 45/60 /S CPO-TW 220-240V 50/60Hz

HID-PrimaVision Xtreme 90/140 /S CPO-TW 220-240V 50/60Hz


(x)

11

5

Inrush current

Peak

(A)

37

56

Inrush current

Width

(ms)

0.29

0.42

Electrical data

Type

HID-PXt 45 /S CPO-TW 220-240V





Type

HID-PXt 45 /S CPO-TW 220-240V 50/60Hz




Number of

Lamps

(x)

1

1

1

1

Rated

Gear-

Lamp

Power

45

60

90

140

Power losses gear

(W)

6.5

7.3

9.0

12.7

Line

Frequency

(Hz)

50/60

50/60

50/60

50/60

Line

Voltage

(V)

220-240

220-240

220-240

220-240

T-case life

(ºC)

80

80

80

80

T-case maximum

(ºC)

90

90

90

90

T-ambient

50

50

50

50

Ignition

Voltage

(kV)

2.4

2.4

2.1

2.1


(pF)

1000

1000

1000

1000

Weight

0.95 kg

0.85 kg

0.95 kg

0.95 kg

Qty bulk packing

12

12

12

12


40.1 cm x 15.6 cm x 16.3 cm

40.1 cm x 15.6 cm x 16.3 cm

27.5 cm x 17.1 cm x 22.8 cm

27.5 cm x 17.1 cm x 22.8 cm


8711500915078

8711500914910

8711500914934

-

EOC

8711500

915061 30

914903 30

914927 30

-

HID-PV Xt


HID DynaVision LumiStep

HID-DV

3.120



●

Stand-alone dimming, lightweight, one-piece electronic gear for

CosmoWhite lamps


●

Step dimming from 100% down to 60% within three preprogrammed cycles - 6, 8 and 10 hours – at start times determined in the dimming cycle

●

●

No external control components nor additional signal wiring required

Single easily-installed, self-contained component

●

●

●

●

●

●

●

●

●

●

●

High system efficiency – up to 92%

Xtreme long lifetime gear: 60,000 hours 95% survival rate (or

80,000 hours with 90% survival rate) at nominal temperature

Peak voltage protection safeguards the lamp; surge protection safeguards the gear (differential mode/common mode 2kV/4kV)

Full lightning protection (10kV L/N to GND)

Guaranteed system performance at all mains voltages from 198-

254 V

Double insulated so easy to use in Class 2 applications

Stable, flicker-free lamp operation


Size suitable for both luminaire and pole mounting and also for retrofit installations (same footprint as electromagnetic systems)

Cage clamp terminal connections with pushbutton release

Compact and environment-friendly system

Applications

●

Road and street lighting

●

●

●


City beautification


Environment

●

Philips Green product with high efficacy minimises environmental

●

● impact and CO

2

RoHS compliant emission

ENEC or KEMA/VDE approved

Quality


●


● optimum lamp/gear performance is maintained

European standards: Philips HID electronic gears comply with all relevant international rules and regulations



A2 Type

HID-DLS Xt 60 CPO-TW

HID DynaVision LumiStep

A1Nom

135.0

A2Nom

120.9

B1Nom

65.0

B2Nom

46.8

C1Nom D1Nom

65.0

4.8

HID-DV

Inrush current

Type

A1


(x)

11

Inrush current

Peak

(A)

37

Inrush current

Width

(ms)

0.29

HID-DLS Xt 60 CPO-TW

Electrical data

Type

HID-DLS

Number of

Lamps

(x)

1


Type

HID-DLS-6 Xt 60 /S CPO-TW 220-240V



Rated

Gear-

Lamp

Power

60

Power losses gear

(W)

7.3

Line

Frequency

(Hz)

50/60

Line

Voltage

(V)

220-240

Weight

0.85 kg

0.85 kg

0.85 kg

Qty bulk packing

12

12

12

T-case life

(ºC)

70

T-case maximum

(ºC)

70

T-ambient

50

Ignition

Voltage

(kV)

2.4


(pF)

1000


40.1 cm x 15.6 cm x 16.3 cm

40.1 cm x 15.6 cm x 16.3 cm

40.1 cm x 15.6 cm x 16.3 cm


8711500915092

8711500915115

8711500915153

EOC

8711500

915085 30

915108 30

915122 30

HID-DV


HID-DynaVision Control SON

HID-DVC


●

HID-DynaVision Controller for combination with dimming gear

(BSH), electromagnetic gear (BSN) and ignitor


●

Offers the possibility of creating 250W and 400W SON dimming

● systems with electromagnetic gear

Can be added on to existing luminaires, practically no cable-length

● restrictions

Light level can be continuously dimmed from 100 to 20% (approx.

35% system power)

●

●

●

●

1-10V input for dim-control signal

Constant lamp power for mains overvoltage, power control at all dimming levels

HID-DV Controller in Aluminium house, M8 stud for mounting, screw connectors for wiring

Electromagnetic gears equipped with screw terminal blocks

Applications

●

Similar to those of the related lamps (SON), for continuous dimming

● in telecontrol or telemanagement system

Can also be used as two-level dimming system with switched line

● control when used in combination with an SDU

Climatic suitability: use in luminaries or poles under normal humid conditions (IP > 23)

Quality


●

System supplier: As manufacturers of lamps and electronic control

● gear, Philips ensures that, from the earliest development stage, optimum lamp/gear performance is maintained.

European standards: Philips HID electronic gears comply with all relevant international rules and regulations.


HID-em

Safety

Performance

RFI

Harmonics

EMC immunity

Approval marking

CE-marking


HID-ignitors

Safety

Performance

RFI

Harmonics

EMC immunity

Approval marking

EN 61347-2-9

EN 60923

EN 55015

EN 61000-3-2

EN 61547

ENEC

ISO 14001

EN 61347-2-1

EN 60927

EN 55015

EN 61000-3-2

EN 61547

ENEC

3.122


CE-marking


HID-electronics

Safety

Performance

RFI

Harmonics

EMC immunity

ISO 14001

EN 61347-2-1/2-3/2-9

EN 60927 / EN 60929

EN 55015 / EN 55022

EN 61000-3-2

EN 61547


Approval marking

CE-marking



KEMA/VDE


BSH

Inrush current

Type

HID-DVC 250/400 SON 220-240V 50/60Hz

BSH 250/400 L36 220/240V 50/60Hz

Electrical data

Type

HID-DVC 250 SON 220-240V 50/60Hz

HID-DVC 400 SON 220-240V 50/60Hz

BSH 250/400 L36 220/240V 50/60Hz

Electrical data

Type

HID-DVC 250 SON 220-240V 50/60Hz

HID-DVC 400 SON 220-240V 50/60Hz

BSH 250/400 L36 220/240V 50/60Hz


Type

HID-DVC 250 SON 220-240V 50/60Hz

BSH 250/400 L36 220/240V 50/60Hz HD1-118

HID-DVC 400 SON 220-240V 50/60Hz

Inrush current

Peak

(A)

3.6

-

Inrush current

Width

(ms)

0.10

-

Number of

Lamps

(x)

1

1

1

Rated

Gear-

Lamp

Power

250

400

250/400

Power losses gear

(W)

40

50

11.0-20.0

Line

Frequency

(Hz)

50/60

50/60

50/60

Line

Voltage

(V)

220-240

220-240

220/240

T-case life

(ºC)

85

85

-

T-case maximum

(ºC)

85

85

-

T-ambient

50

50

-

T-winding

130

-

-

Delta-T normal conditions

(ºC)

75

-

-

Weight

0.363 kg

1.265 kg

0.363 kg

Qty bulk packing

6

6

6


15.5 cm x 13.7 cm x 8.5 cm

20.8 cm x 13.9 cm x 11.4 cm

15.5 cm x 13.7 cm x 8.5 cm


8711500748553

8711500539854

8711500748652

EOC

8711500

748546 30

539847 31

748645 30




Mains operation

Rated mains voltage 220 - 240 V

With tolerances for performance 203 - 254 V


Mains frequency


Power factor* (nominal power)

Power factor* (35% power)

* With rated PF capacitor value

Earth leakage current (per gear)

180 - 264 V

50/60 Hz

50 Hz

> 0.92

> 0.7

< 0.5 mA

Overvoltage protection 48 hrs at 325 Vac

2 hrs at 366 Vac

5 min at 400 Vac

No limit.

Cable length to normal gear

Notes:


2. Gear must be earthed.

3. Power factor correction capacitor should be connected directly on the mains; when installing this device in front of existing gear, the original capacitor has to be removed.

Control characteristics

Control input

Control voltage input

Protected against mains voltage

1-10 V

Yes connection

Control resistance (to be connected on 1-10V input)

Regulating light level SON

0 - 100 kΩ

20 - 100%

250/400 W

After ignition or lamp restrike allways 100% level for 5 min

Gear dimming fading rates are:

SON 250/400 W

Fade up (35-100%)

Fade down (100-35%)

< 1.0 min

< 1.5 min


Wire cross-section:

On the mains side

On the lamp side

Strip length

0.75…2.5 mm 2

0.75…2.5 mm 2

6 mm

HID-DVC

3.124




HID-SDU for regulating systems

SDU

Type

SDU-01/H /L 220-240V 50/60Hz


●

Interface for two-level control of electronic gears with 1-10V dim input with 230V switched line signal


In combination with

●

●

HF-Regulator for Fluorescent lamps: dimming from 100 to 50%

In combination with HID-DynaVision drivers for SON (SDU-01/H)

● or CDO (SDU-01/L) lamps: dimming from 100 to 50%

When SDU is connected the dim-input of the electronic gear is not galvanically isolated anymore!

● SDU in synthetic ’standard’ ignitor house with M8 stud, screw connectors for wiring

Applications

●

Public lighting where two-level dimming is required combined with the advantages of electronic operation

Quality


●


● optimum lamp/gear performance is maintained.

European standards: Philips HID electronic gears comply with all relevant international rules and regulations.


Safety

Performance

RFI

Harmonics

EMC immunity

Approval marking

CE-marking



EN 61347-2-1/2-3/2-9

EN 60927 / EN 60929

EN 55015 / EN 55022

EN 61000-3-2

EN 61547

KEMA/VDE


A1Nom

89.0

A2Nom

70.0

B1Nom

41.0

C1Nom D1Nom

38.0

4.3

A2

A1

SDU-01/H /L

3.126


HID-SDU for regulating systems

Electrical data

Type

SDU-01/H /L


Type

SDU-01/H

SDU-01/L


Mains operation


-8%…+6%

Control voltage

Max input current

220 - 240 V

198 - 260 V

160 mA

Weight

0.043 kg

0.043 kg

Number of

Lamps

(x)

1-4

Rated

Gear-

Lamp

Power

13-600

Line

Frequency

(Hz)

50/60

Line

Voltage

(V)

220-240

T-case maximum

(ºC)

85

T-ambient

80

Qty bulk packing

20

20


20 cm x 17.5 cm x 11 cm

20 cm x 17.5 cm x 11 cm

Operation frequency


8711500747297

8711500747273

50/60 Hz


Wire cross-section:

On the mains side

Strip length

0.75…2.5 mm 2

6 mm

EOC

8727900

800845 00

800869 00

SDU


HID-Basic BSN/BMH semi-parallel ignitor

BSN


●

Impregnated electromagnetic copper/iron gears for use with an external semi parallel ignitor for CDM, CDO, MH, HPI (Plus) and

SON lamps


●

Compact dimensions and light weight with minimal watt losses,

● thanks to orthocyclic winding process

Control gear can be installed remotely; substantial distance allowed

● between gear/ignitor & lamp

Equipped as standard with screw terminal blocks; insert contact on

●

●

● request

Earthing-while-mounting facility

Gear can also be used in combination with series (superimposed) ignitor

Versions with ThermoSwitch available for protection against end- of

-lamp- life phenomena (TS mandatory for operation of CDM lamps).

Applications

●

Ideal for the following applications:

○

○

Recreational sports lighting, indoor and outdoor


●

○

○

○

○

Floodlighting of buildings and monuments

Area lighting, e.g. harbors, building sites

Canopy lighting, e.g. petrol stations

Horticulture

Climatic suitability: restricted to built-in situations where relative humidity is limited

Quality


●

System supplier: As manufacturers of lamps and electromagnetic control gear, Philips ensures that, from the earliest development

● stage, optimum lamp/gear performance is maintained.

European standards: Philips HID electromagnetic gears comply with all relevant international rules and regulations.


Safety

Performance

RFI

Harmonics

EMC immunity

Approval marking

CE-marking


EN 61347-2-9

EN 60923

EN 55015

EN 61000-3-2

EN 61547

ENEC

ISO 14001



3.128


A2

BMH/BSN

A1

A2

BSN

A1

Type

BMH 35/70

BSN 50

BSN 100

BSN 150

BSN 250

Type

BSN 400/600


A1Nom

118.0

118.0

123.0

134.0

160.0

A2Nom

94.0

94.0

98.0

113.0

139.0

B1Nom

61.0

61.0

61.0

76.0

76.0

C1Nom D1Nom

52.0

52.0

52.0

65.0

65.0

6.2

6.2

6.2

6.2

6.2

A1Nom

166.0

A2Nom

145.0

B1Nom

97.0

B2Nom

78.5

C1Nom D1Nom

83.0

6.5

BMH

Electrical data

Type

BMH35L407ITS

BMH70L407ITS

BSN50L407ITS

BSN70L407ITS

BSN100L302I

BSN100L407ITS

BSN150L407I

BSN150L407ITS

BSN250L407I

BSN250L407ITS

BSN400L302I

BSN400L407ITS

BSN600L407ITS

BSN600L309ITS

Number of

Lamps

(x)

1

1

1

1

1

1

1

1

1

1

1

1

1

1

Power losses gear

(W)

8.1/8.3

12.7/13.9

11.3 / 11.9

12.8 / 13.2

14.9

13.5 / 14.1

16.3

16.3

25.2 / 26.3

25.2 / 26.3

29.0

30.0

34.0

37.0

Rated

Gear-

Lamp

Power

35

70

100

100

50

70

150

150

250

250

400

400

600

600

Line

Frequency

50

50

50

50

(Hz)

50

50

50

50

50

50

50

50

50

50

Line

Voltage

(V)

230/240

230/240

230/240

230/240

230

230/240

230/240

230/240

230/240

230/240

230

230/240

230/240

400

T-winding

130

130

130

130

130

130

130

130

130

130

130

130

130

130


(ºC)

65/70

65/70

70/75

65

75

70/75

70

70

70

70

70

75

75

75

Input current with PF-correct.

(A)

0.24

0.45

0.3

0.6

0.6

0.6

0.85

0.85

1.31

1.31

2.2

2.2

3.1

1.87




Type

BMH35L407ITS

BMH70L407ITS

BSN50L407ITS

BSN70L407ITS

BSN100L302I

BSN100L407ITS

BSN150L407I

BSN150L407ITS

BSN250L407I

BSN250L407ITS

BSN400L302I

BSN400L407ITS

BSN600L407ITS

BSN600L309ITS


Mains operation

With tolerances for performance -8% / +6%

With tolerances for operation -10% / +10%


Power factor with specified capacitor (minimum)

50 Hz

0.85

Weight

1.82

2.9

2.9

4.3

1.2

1.1

1.22

1.82

4.3

5.2

5.2

1.01

1.1

0.87

Qty bulk packing

6

6

6

6

2

6

6

6

6

6

6

2

2

2


19.6 cm x 13.3 cm x 11.1 cm

19.6 cm x 13.3 cm x 11.1 cm

19.6 cm x 13.3 cm x 11.1 cm

19.6 cm x 13.3 cm x 11.1 cm

19.6 cm x 13.8 cm x 11.1 cm

19.6 cm x 13.8 cm x 11.1 cm

24.2 cm x 14.9 cm x 13.7 cm

24.2 cm x 14.9 cm x 13.7 cm

24.2 cm x 17.5 cm x 13.7 cm

24.2 cm x 17.5 cm x 13.7 cm

21 cm x 17.9 cm x 9 cm

21 cm x 17.9 cm x 9 cm

21 cm x 17.9 cm x 9 cm

21 cm x 17.9 cm x 9 cm


8711500749208

8711500061355

8711500536129

8711500535832

8711500739865

8711500747754

8711500738479

8711500739094

8711500738516

8711500739179

8711500746221

8711500934406

8711500538819

8711500748362


Wire cross-section:

On the mains side

Strip length

0.75-2.5 mm 2

6 mm

EOC

8711500

749192 30

739704 30

536129 30

535832 30

739865 31

747747 30

738479 30

739087 30

738516 30

739162 30

746221 30

538635 31

538802 30

748355 30

BMH/BSN

3.130




HID-Basic Multi-Wattage series ignitor

BSN


●

Impregnated electromagnetic copper/iron double-wattage gears for use with an external series (superimposed) ignitor for CDO, MH,

HPI (Plus) and SON lamps


●

Double wattage & double voltage gears

●

●

Possibility of step-dimming with an external controller

All gears are equipped with ThermoSwitch protection against end-

● of-lamp-life phenomena


●


Equipped as standard with screw terminal blocks; insert contact on request


Applications

●


○

○



●

○

○

○


Area lighting, e.g. harbors, building sites, city centres, shopping centres, pedestrian areas



Quality


●

●

System supplier: As manufacturers of lamps and electromagnetic control gear, Philips ensures that, from the earliest development stage, optimum lamp/gear performance is maintained.



Safety

Performance

RFI

Harmonics

EMC immunity

Approval marking

CE-marking



EN 61347-2-9

EN 60923

EN 55015

EN 61000-3-2

EN 61547

ENEC


3.132


Type

BSN 50/70

BSN 70/100

BSN 100/150

HID-Basic Multi-Wattage series ignitor

A1Nom

118.0

123.0

134.0

A2Nom

94.0

98.0

113.0

B1Nom

61.0

61.0

76.0

C1Nom D1Nom

52.0

52.0

65.0

6.2

6.2

6.2

A2

A1

BSN

Type

BSN 150/250 & 250/400

A1Nom

166.0

A2Nom

145.0

B1Nom

97.0

B2Nom

78.5

C1Nom D1Nom

83.0

6.5

A2

A1

BSN

Electrical data

Type

BSN 50/70 L407-TS 230/240V 50Hz

BSN 70/100 L407-TS 230/240V 50Hz

BSN 100/150 L407-TS 230/240V 50Hz

BSN 150/250 L407-TS 230/240V 50Hz

BSN 250/400 L407-TS 230/240V 50Hz


Type

BSN 50/70 L407-TS 230/240V 50Hz

BSN 70/100 L407-TS 230/240V 50Hz

BSN 100/150 L407-TS 230/240V 50Hz

BSN 150/250 L407-TS 230/240V 50Hz

BSN 250/400 L407-TS 230/240V 50Hz


Mains operation





50 Hz

0.85


Wire cross-section:

On the mains side

Strip length

0.75-2.5 mm 2

6 mm

Number of

Lamps

(x)

1

1

1

1

1

Rated

Gear-

Lamp

Power

50/70

70/100

100/150

150/250

250/400

Weight

1.2 kg

1.31 kg

2.17 kg

3.365 kg

5.36 kg

Qty bulk packing

6

6

6

2

2

BSN

Power losses gear

(W)

10.3/11.6

11.2/15.3

10.0/17.7

13.2/27.1

18.7/32.4

Line

Frequency

(Hz)

50

50

50

50

50


19.6 cm x 13.3 cm x 11.1 cm

19.6 cm x 13.8 cm x 11.1 cm

24.2 cm x 14.9 cm x 13.7 cm

21 cm x 17.9 cm x 9 cm

21 cm x 17.9 cm x 9 cm

Line

Voltage

(V)

230/240

230/240

230/240

230/240

230/240

T-winding

130

130

130

130

130


(ºC)

60/70

60/75

40/65

40/80

40/60


(A)

0.30/0.45

0.45/0.6

0.6/0.85

0.85/1.4

1.40/2.20


8711500539410

8711500060501

8711500063922

8711500736369

8711500060440

EOC

8711500

539403 31

060495 30

063915 30

736352 30

060433 30


HID-HeavyDuty BSN semi-parallel ignitor

BSN


●

Encapsulated electromagnetic copper/iron gears for use with an external semi-parallel ignitor for CDM, CDO, MH, HPI (Plus) and

SON lamps (no ignitor needed for SON-I lamps)


●

Outstanding product life

●

Excellent resistance to chemical attack, humid conditions and high environmental stress crack resistance

●

●

Separate earth terminal

All gears are equipped with ThermoSwitch protection against end-

●

●

●

● of-lamp-life phenomena

Compact dimensions and light weight with minimal watt losses, thanks to orthocyclic winding process

Equipped as standard with screw terminal blocks

Gear can also be used in combination with a series (superimposed) ignitor

Gears for alternative mains voltages/frequencies on request

Applications

●


○

○

Outdoor: tunnels and parking areas

Outside luminaire: in the pole or electrical cabinet

●

○

○


Area lighting, e.g. harbors, building sites, city centres, shopping centres, pedestrian areas

Climatic suitability: use in luminaires under normal humidity conditions (not drip-proof)

Quality


●





Safety

Performance

RFI

Harmonics

EMC immunity

Approval marking

CE-marking


EN 61347-2-9

EN 60923

EN 55015

EN 61000-3-2

EN 61547

ENEC

ISO 14001

Recommended ballast page 3.170


3.134


A2

BSN

Electrical data

Type

A1

BSN 50 L33-TS 230V 50Hz

BSN 50 L34 240V 50Hz

BSN 70 L33-TS 230V 50Hz

BSN 70 L34-TS 240V 50Hz

BSN 100 L33-TS 230V 50Hz

BSN 100 L34-TS 240V 50Hz

BSN 150 L33-TS 230V 50Hz

BSN 150 L34-TS 240V 50Hz

BSN 250 L33-TS 230V 50Hz

BSN 250 L34-TS 240V 50Hz

BSN 400 L33-TS 230V 50Hz

BSN 400 L34-TS 240V 50Hz


Type

BSN 50 L33-TS 230V 50Hz

BSN 50 L34 240V 50Hz

BSN 70 L33-TS 230V 50Hz

BSN 70 L34-TS 240V 50Hz

BSN 100 L33-TS 230V 50Hz

BSN 100 L34-TS 240V 50Hz

BSN 150 L33-TS 230V 50Hz

BSN 150 L34-TS 240V 50Hz

BSN 250 L33-TS 230V 50Hz

BSN 250 L34-TS 240V 50Hz

BSN 400 L33-TS 230V 50Hz

BSN 400 L34-TS 240V 50Hz

Type

BSN 50/70

BSN 100

BSN 150 L33

BSN 150 L34

BSN 250 L33

BSN 250 L34

BSN 400

Number of

Lamps

(x)

1

1

1

1

1

1

1

1

1

1

1

1


A1Nom

118.0

123.0

126.0

134.0

151.0

160.0

166.0

A2Nom

103.0

108.0

107.5

115.5

132.5

141.5

147.5

B1Nom

81.0

81.0

102.0

65.0

65.0

81.0

81.0

C1Nom D1Nom

66.0

66.0

84.0

53.0

53.0

66.0

66.0

6.2

6.2

6.2

6.2

6.2

6.2

6.2

Weight

1 kg

1 kg

1.28 kg

1.28 kg

1.3 kg

1.3 kg

1.8 kg

1.8 kg

2.7 kg

3.05 kg

4.55 kg

4.55 kg

Rated

Gear-

Lamp

Power

50

50

100

100

70

70

150

150

250

250

400

400

Qty bulk packing

6

6

6

6

6

6

6

6

4

4

6

6

Power losses gear

(W)

10.9

10.0

11.0

11.5

13.6

13.8

19.0

20.0

29.0

27.0

28.0

32.0

Line

Frequency

50

50

50

50

(Hz)

50

50

50

50

50

50

50

50

Line

Voltage

240

230

240

230

(V)

230

240

230

240

230

240

230

240

T-winding

130

130

130

130

130

130

130

130

130

130

130

130


(ºC)

60

65

70

75

55

55

75

70

80

80

70

70


(A)

0.30

0.30

0.45

0.45

0.60

0.60

0.85

0.85

1.40

1.40

2.20

2.20


20.8 cm x 13.4 cm x 11.4 cm

20.8 cm x 13.4 cm x 11.4 cm

20.8 cm x 13.9 cm x 11.4 cm

20.8 cm x 13.9 cm x 11.4 cm

20.8 cm x 13.4 cm x 11.4 cm

20.8 cm x 13.4 cm x 11.4 cm

25.3 cm x 14.2 cm x 13.9 cm

25.3 cm x 15 cm x 13.9 cm

25.3 cm x 16.7 cm x 13.9 cm

25.3 cm x 17.6 cm x 13.9 cm

21.6 cm x 18.2 cm x 17.7 cm

21.6 cm x 18.2 cm x 17.7 cm


8711500748232

8711500062093

8711500062154

8711500062161

8711500061614

8711500061621

8711500059611

8711500059635

8711500059659

8711500059673

8711500059772

8711500059796

EOC

8711500

748225 30

915399 31

059680 31

059703 31

059727 31

059741 31

059604 30

059628 30

059642 30

059666 30

059765 30

059789 30




Mains operation





50 Hz

0.85


Wire cross-section:

On the mains side

Strip length

0.75-2.5 mm 2

6 mm

BSN

3.136




HID-Basic BHL (HPL/HPI)

BHL


●

Impregnated electromagnetic copper/iron gears for HPL and HPI

(Plus) lamps


●



Equipped as standard with screw terminal blocks; insert contacts on

●

● request



●

●

ThermoSwitch added for maximum safety


Applications

●


○

High-bay lighting, e.g. industrial workshops, exhibition halls, hypermarkets, shopping malls, DIY stores, churches, airports,

○

○

○ railway stations




●

○

○




Quality


●

●




Safety

Performance

RFI

Harmonics

EMC immunity

Approval marking

CE-marking



EN 61347-2-9

EN 60923

EN 55015

EN 61000-3-2

EN 61547

ENEC


3.138


A2

BHL

Electrical data

Type

A1

BHL50L307

BHL80L307

BHL125L202

BHL125L307

BHL250L200

BHL250L202

BHL250L307

BHL400L200

BHL400L202

BHL400L307

Type

BHL 50

BHL 80

BHL 125 L202/L307

BHL 250 L200/L202

BHL 250 L307

BHL 400 L200/L202

BHL 400 L307


A1Nom

117.0

117.0

117.0

126.0

134.0

150.0

160.0

A2Nom

94.0

94.0

94.0

105.0

112.0

130.0

139.0

B1Nom

76.0

76.0

76.0

61.0

61.0

61.0

76.0

C1Nom D1Nom

65.0

65.0

65.0

52.0

52.0

52.0

65.0

6.2

6.2

6.2

6.2

6.2

6.2

6.2

Number of

Lamps

(x)

1

1

1

1

1

1

1

1

1

1

Rated

Gear-

Lamp

Power

250

400

400

400

125

125

250

250

50

80

Power losses gear

(W)

8.7

11.6

18.5

20.4

21.5

21.4

14.0

14.0

17.2

17.9

Line

Frequency

(Hz)

50

50

50

50

50

50

50

50

50

50

Line

Voltage

(V)

230/240

230/240

230

230/240

220

230

230/240

220

230

230/240

T-winding

130

130

130

130

130

130

130

130

130

130


(ºC)

65

70

70

65

70

70

85

85

55

75

1.35

2.15

2.15

2.15

0.70

0.70

1.35

1.35

Input current with PFcorrect.

(A)

0.30

0.45




Type

BHL50L307

BHL80L307

BHL125L202

BHL125L307

BHL250L200

BHL250L202

BHL250L307

BHL400L200

BHL400L202

BHL400L307


Mains operation





-10% / +10%

50 Hz

0.85

Weight

0.86 kg

0.87 kg

1.05 kg

1.05 kg

1.85 kg

1.85 kg

1.85 kg

2.95 kg

2.95 kg

2.95 kg

Qty bulk packing

6

6

6

6

6

6

6

6

6

6


19.6 cm x 13.3 cm x 11.1 cm

19.6 cm x 13.3 cm x 11.1 cm

19.6 cm x 13.3 cm x 11.1 cm

19.6 cm x 13.3 cm x 11.1 cm

24.2 cm x 14.1 cm x 13.7 cm

24.2 cm x 14.1 cm x 13.7 cm

24.2 cm x 14.1 cm x 13.7 cm

24.2 cm x 14.1 cm x 13.7 cm

24.2 cm x 16.6 cm x 13.7 cm

24.2 cm x 16.6 cm x 13.7 cm


8711500060891

8711500061348

8711500060938

8711500060921

8711500737441

8711500738172

8711500737236

8711500737502

8711500739216

8711500737267


Wire cross-section:

On the mains side

Strip length

0.75-2.5 mm 2

6 mm

EOC

8711500

919076 30

919083 30

919434 31

919090 31

737434 30

738165 30

737229 30

737496 30

739209 30

737250 30

BHL 50, 50/80, 80, 80/125, 125 BHL 250/400

3.140




HID-HeavyDuty BHL (HPL/HPI)

BHL


●

Encapsulated electromagnetic copper/iron gears for HPL and HPI

(Plus) lamps


●


●


●

●



●

●

●

Separate earth terminal (HID ‘Heavy Duty’)



Applications

●


○

○



○

○

○



High bay lighting, e.g. industrial workshops, exhibition halls, hypermarkets, shopping malls, DIY stores, churches, airports,

● railway stations

Climatic suitability: use in luminaires under normal humidity conditions (not drip-proof)

Quality


●

●




Safety

Performance

RFI

Harmonics

EMC immunity

Approval marking

CE-marking



EN 61347-2-9

EN 60923

EN 55015

EN 61000-3-2

EN 61547

ENEC


3.142


A2

Type

BHL 50/80/125

BHL 250 L32

BHL 250 L40

BHL 400 L32

BHL 400 L40


A1Nom

118.0

134.0

126.0

160.0

151.0

A2Nom

103.0

115.5

107.5

141.5

132.5

B1Nom

65.0

81.0

81.0

81.0

81.0

C1Nom D1Nom

53.0

66.0

66.0

66.0

66.0

6.2

6.2

6.2

6.2

6.2

BHL

Electrical data

Type

A1

BHL 50/80 L48 230V 50Hz

BHL 80 L32 240V 50Hz

BHL 80 L40 230V 50Hz

BHL 80/125 L48 230V 50Hz

BHL 125 L32 240V 50Hz

BHL 125 L40 230V 50Hz

BHL 250 L32 240V 50Hz

BHL 250 L40 230V 50Hz

BHL 400 L32 240V 50Hz

BHL 400 L40 230V 50Hz


Type

BHL 50/80 L48 230V 50Hz

BHL 80 L32 240V 50Hz

BHL 80 L40 230V 50Hz

BHL 80/125 L48 230V 50Hz

BHL 125 L32 240V 50Hz

BHL 125 L40 230V 50Hz

BHL 250 L32 240V 50Hz

BHL 250 L40 230V 50Hz

BHL 400 L32 240V 50Hz

BHL 400 L40 230V 50Hz

Number of

Lamps

(x)

1

1

1

1

1

1

1

1

1

1

Rated

Gear-

Lamp

Power

50/80

80

80

80/125

125

125

250

250

400

400

Power losses gear

(W)

7.0/10.0

10.5

10.5

9.6/12.2

13.2

12.7

20.5

19.5

23.0

22.0

Line

Frequency

50

50

50

50

(Hz)

50

50

50

50

50

50

Line

Voltage

230

240

230

240

(V)

230

240

230

230

240

230

T-winding

130

130

130

130

130

130

130

130

130

130


(ºC)

55

60

70

70

60

75

85

85

85

80


(A)

0.30/0.45

0.45

0.45

0.45/0.70

0.70

0.70

1.35

1.35

2.15

2.15

Weight

1.25 kg

1 kg

1 kg

1.25 kg

1.26 kg

1.26 kg

2.1 kg

1.84 kg

3.05 kg

2.75 kg

Qty bulk packing

6

6

6

6

6

6

6

6

6

6


20.8 cm x 13.9 cm x 11.4 cm

20.8 cm x 13.4 cm x 11.4 cm

20.8 cm x 13.4 cm x 11.4 cm

20.8 cm x 13.9 cm x 11.4 cm

20.8 cm x 13.9 cm x 11.4 cm

20.8 cm x 13.9 cm x 11.4 cm

25.3 cm x 15 cm x 13.9 cm

25.3 cm x 14.2 cm x 13.9 cm

25.3 cm x 17.6 cm x 13.9 cm

25.3 cm x 16.7 cm x 13.9 cm


8711500061768

8711500061690

8711500061683

8711500061782

8711500061720

8711500061744

8711500932709

8711500934604

8711500932440

8711500934703

EOC

8711500

919649 31

919373 31

919359 31

919694 31

919441 31

915146 31

944894 30

919502 30

919557 30

919533 30




Mains operation





50 Hz

0.85


Wire cross-section:

On the mains side

Strip length

0.75-2.5 mm 2

6 mm

BHL 50/80, 80, 80/125, 125 BHL 250/400

3.144




HID-HighPower MH, HPI, HPL, SON

BHD



A1

A3

A2

D1

BHD/BMH/BML

3.146


Type

BHD 2000 L76/L77

BMH 1800 L43/L78 & 2000 L76

BHL 1000 L02/L78

BHL 2000 L50

BHL 2000 L76/L78

BSN 1000 L02/L43/L78


●

Encapsulated gears for use with SON (T) (Plus), HPL, HPI and MH lamps with rated wattages of 1000W and above


●

Class I rated (i.e. with earthing facility)

●

Compact dimensions and minimal watt losses (typically 5% of system power), thanks to orthocyclic winding process

●

●

Both single-phase (220-230-240V) and 3-phase (380-400-415V) models


●

●

●

Encapsulated design for excellent protection against moisture ingress

Narrow cross-section is ideal for pole-mounting situations


Applications

●


○

○

○

Floodlighting of large buildings, facades and monuments

Sports lighting, e.g. stadiums, arenas

Area lighting, e.g. harbors, building sites, industrial complexes

Quality


●





Safety

Performance

RFI

Harmonics

EMC immunity

Approval marking

CE-marking


EN 61347-2-9

EN 60923

EN 55015

EN 61000-3-2

EN 61547

ENEC

ISO 14001

A1Nom A2Nom A3Nom B1Nom B2Nom C1Nom D1Nom

317.0

317.0

207.0

257.0

317.0

257.0

282.0

282.0

172.0

222.0

282.0

222.0

306.0

306.0

196.0

246.0

306.0

246.0

117.0

117.0

117.0

117.0

117.0

117.0

88.0

88.0

88.0

88.0

88.0

88.0

102.0

102.0

102.0

102.0

102.0

102.0

6.5

6.5

6.5

6.5

6.5

6.5


Electrical data

Type

BHL 1000 L02 220V 50Hz

BHL 1000 L78 230/240V 50Hz

BSN 1000 L02 220V 50Hz

BSN 1000 L43 220V 60Hz

BSN 1000 L78 230/240V 50Hz

BMH 1800 L43 220V 60Hz

BMH 1800 L78 230/240V 50Hz

BHD 2000 L76 380/400/415V 50Hz

BHD 2000 L77 400/415/430V 50Hz

BHL 2000 L50 380/400V 50Hz

BHL 2000 L76 380/400/415V 50Hz

BHL 2000 L78 230/240V 50Hz

BMH 2000 L76 380/400/415V 50Hz


Type

BHL 1000 L02 220V 50Hz

BHL 1000 L78 230/240V 50Hz

BSN 1000 L02 220V 50Hz

BSN 1000 L43 220V 60Hz

BSN 1000 L78 230/240V 50Hz

BMH 1800 L43 220V 60Hz

BMH 1800 L78 230/240V 50Hz

BHD 2000 L76 380/400/415V 50Hz

BHD 2000 L77 400/415/430V 50Hz

BHL 2000 L50 380/400V 50Hz

BHL 2000 L76 380/400/415V 50Hz

BHL 2000 L78 230/240V 50Hz

BMH 2000 L76 380/400/415V 50Hz


Mains operation

With tolerances for performance -8%...+6%

With tolerances for operation -10%...+10%

Operation frequency (typical) 50 Hz


0.85

Number of

Lamps

(x)

1

1

1

1

1

1

1

1

1

1

1

1

1

Weight

8.5 kg

8.5 kg

12.5 kg

12.5 kg

12.5 kg

17.5 kg

17.5 kg

17.3 kg

17.5 kg

8.5 kg

15.5 kg

16.5 kg

17.5 kg

Rated

Gear-

Lamp

Power

1000

1800

1800

2000

2000

1000

1000

1000

1000

2000

2000

2000

2000

Line

Frequency

(Hz)

50

50

50

60

50

60

50

50

50

50

50

50

50

Power losses gear

(W)

40.0

80.0

86.0

80.0

85.0

35.0

56.0

56.0

54.0

48.0

77.0

92.0

72.0

Line

Voltage

(V)

220

230/240

220

220

230/240

220

230/240

380-415

400-430

380/400

380-415

230/240

380-415

T-winding

Qty bulk packing

1

1

1

1

1

1

1

1

1

1

1

1

1


22 cm x 13 cm x 10.5 cm

22 cm x 13 cm x 10.5 cm

27 cm x 13 cm x 10.5 cm

27 cm x 13 cm x 10.5 cm

27 cm x 13 cm x 10.5 cm

33 cm x 16 cm x 18.1 cm

33 cm x 16 cm x 18.1 cm

33 cm x 16 cm x 18.1 cm

33 cm x 16 cm x 18.1 cm

27 cm x 13 cm x 10.5 cm

33 cm x 16 cm x 18.1 cm

33 cm x 16 cm x 18.1 cm

33 cm x 16 cm x 18.1 cm


8711500062314

8711500062376

8711500062284

8711500062277

8711500062369

8711500062352

8711500059901

8711500742766

8711500538178

8711500062291

8711500063847

8711500063854

8711500060129


Wire cross-section:

On the mains side

Strip length

0.75…2.5 mm 2

6 mm

130

130

130

130

130

130

130

130

130

130

130

130

130


(ºC)

70

65

75

80

80

70

70

70

70

70

65

70

70

EOC

8711500

062314 00

062376 00

062284 00

062277 00

062369 00

062352 00

059901 00

742766 00

538178 00

062291 00

063847 00

063854 00

060129 00

Input current with PFcorrect.

(A)

5.60

9.80

9.80

6.60

6.60

5.40

5.70

5.50

5.50

6.30

6.30

10.60

6.60



SN 56/SN 59

SI 52

Series ignitor

SN 61

SI 54

3.148




HID-Basic gears BSX (SOX)

BSX


●

Impregnated electromagnetic copper/iron gears for use with an external ignitor for SOX and SOX-E lamps


●



Equipped with double-insert contacts

●

●



Applications

●


○

Road lighting, railway marshalling yards and crossings, airports, harbors and docks, quarries, foundries and rolling mills

●

○


Climatic suitability: use in luminaires or poles under normal humidity conditions (not drip-proof)

Quality


●





Safety

Performance

RFI

Harmonics

EMC immunity

Approval marking

CE-marking



EN 61347-2-9

EN 60923

EN 55015

EN 61000-3-2

EN 61547

ENEC


3.150


HID-Basic gears BSX (SOX)

A2

D1

A3

A1

BSX

Type

BSX 26/35 + 35/55

Electrical data

Type

A4

A1Nom

196.0

A2Nom

180.0

A3Nom

54.0

A4Nom

54.0

B1Nom

39.0

B2Nom

20.0

C1Nom

28.0

C3Nom D1Nom

1.5

4.2

BSX 26 L80 220V 50Hz

BSX 26 L81 230V 50Hz

BSX 26 L82 240V 50Hz

BSX 35 L80 220V 50Hz

BSX 35 L81 230V 50Hz

BSX 35/55 L204 240V 50Hz

BSX 35/55 L82 240V 50Hz


Type

BSX 26 L80 220V 50Hz

BSX 26 L81 230V 50Hz

BSX 26 L82 240V 50Hz

BSX 35 L80 220V 50Hz

BSX 35 L81 230V 50Hz

BSX 35/55 L204 240V 50Hz

BSX 35/55 L82 240V 50Hz


Mains operation





50 Hz

0.85


Wire cross-section:

On the mains side

Strip length

0.75-2.5 mm 2

6 mm

Weight

0.77 kg

0.77 kg

0.77 kg

0.925 kg

0.925 kg

0.87 kg

0.925 kg

Number of

Lamps

(x)

1

1

1

1

1

1

1

35

35/55

26

35

35/55

Rated

Gear-

Lamp

Power

26

26

Qty bulk packing

24

24

24

6

24

24

24

9.8

11.3

11.7

9.3

12.0

Power losses gear

(W)

9.1

9.4

Line

Frequency

50

50

50

50

(Hz)

50

50

50

BSX


27.8 cm x 23 cm x 13.5 cm

27.8 cm x 23 cm x 13.5 cm

27.8 cm x 23 cm x 13.5 cm

27.8 cm x 23 cm x 13.5 cm

27.8 cm x 23 cm x 13.5 cm

19.6 cm x 13.3 cm x 11.1 cm

27.8 cm x 23 cm x 13.5 cm

Line

Voltage

220

230

240

240

(V)

220

230

240

T-winding

130

130

130

130

130

130

130


(ºC)

55

55

60

60

55

60

65


(A)

0.16

0.16

0.16

0.22

0.22

0.23

0.22


8711500943965

8711500943996

8711500944023

8711500944054

8711500944085

8711500061300

8711500944115

EOC

8711500

920461 30

920492 30

920515 30

920478 30

920508 30

915177 30

920539 30


HID-HeavyDuty BSX (SOX)

BSX


●

Encapsulated electromagnetic copper/iron gears for use with an external ignitor for SOX and SOX-E lamps


●


●


●

●


Equipped with screw terminal blocks

●

●



Applications

●


○


●

○


Climatic suitability: use in luminaires or poles under normal humidity conditions (not drip-proof)

Quality


●





Safety

Performance

RFI

Harmonics

EMC immunity

Approval marking

CE-marking



EN 61347-2-9

EN 60923

EN 55015

EN 61000-3-2

EN 61547

ENEC


3.152


Type

HID-HeavyDuty BSX 50Hz HD1-118

HID-HeavyDuty BSX (SOX)

A1Nom

118.0

A2Nom

103.0

B1Nom

65.0

C1Nom D1Nom

53.0

6.2

A2

BSX

Electrical data

Type

A1

BSX 35 L40 230V 50Hz

BSX 35/55 L32 240V 50Hz

BSX 90 L32 240V 50Hz

BSX 90 L40 230V 50Hz


Type

BSX 35 L40 230V 50Hz

BSX 35/55 L32 240V 50Hz

BSX 90 L32 240V 50Hz

BSX 90 L40 230V 50Hz


Mains operation





50 Hz

0.85

Number of

Lamps

(x)

1

1

1

1

Weight

0.9 kg

0.9 kg

1.26 kg

1.26 kg

Rated

Gear-

Lamp

Power

35

35/55

90

90

Power losses gear

(W)

9.2

9.6

13.3

12.2

Line

Frequency

(Hz)

50

50

50

50

Line

Voltage

(V)

230

240

240

230

T-winding

130

130

130

130


(ºC)

55

65

65

65


(A)

0.23

0.23

0.50

0.50

Qty bulk packing

6

6

6

6


20.8 cm x 13.4 cm x 11.4 cm

20.8 cm x 13.4 cm x 11.4 cm

20.8 cm x 13.9 cm x 11.4 cm

20.8 cm x 13.9 cm x 11.4 cm


8711500061911

8711500061928

8711500061874

8711500061867


Wire cross-section:

On the mains side

Strip length

0.75-2.5 mm 2

6 mm

EOC

8711500

919991 31

920003 31

915344 31

919939 31

BSX


HID-Constant wattage BSX (SOX)

BSX


●

Constant-wattage (potted) electromagnetic copper/iron gears for use with an external ignitor for SOX and SOX-E lamps


●



Series capacitor required in circuits with constant-wattage gears

●

●

Equipped with screw terminal blocks


Applications

●


○


●

○



Quality


●





Safety

Performance

RFI

Harmonics

EMC immunity

Approval marking

CE-marking




EN 61347-2-9

EN 60923

EN 55015

EN 61000-3-2

EN 61547

ENEC

ISO 14001

3.154


A1

A2

Type

BSX 36 H66/55 H26 230-240V 50Hz

BSX 90 H26 220-230V 50Hz

BSX 91 135 H96 220-240V 50Hz

BSX 131 H96 220-240V 50Hz

BSX 180 H96 220-240V 50Hz

HID-Constant wattage BSX (SOX)

A1Nom

173.0

173.0

149.0

178.0

178.0

A2Nom

157.0

157.0

135.0

162.0

162.0

B1Nom

64.0

64.0

80.0

100.0

100.0

B2Nom

42.0

42.0

42.0

42.0

42.0

C1Nom D1Nom

44.0

52.0

67.0

74.0

78.0

4.2

4.2

4.2

4.2

4.2

D1

BSX

Electrical data

Type

BSX 36 H66 230-240V 50Hz

BSX 55 H26 220-230V 50Hz

BSX 90 H26 220-230V 50Hz

BSX 91 H96 220-240V 50Hz

BSX 131 H96 220-240V 50Hz

BSX 131 H96 220-240V 50Hz

BSX 135 H96 230-240V 50Hz

BSX 180 H96 220-240V 50Hz


Type Weight

BSX 36 H66 230-240V 50Hz

BSX 55 H26 220-230V 50Hz

BSX 90 H26 220-230V 50Hz

BSX 91 H96 220-240V 50Hz

BSX 131 H96 220-240V 50Hz

BSX 131 H96 220-240V 50Hz

BSX 135 H96 230-240V 50Hz

BSX 180 H96 220-240V 50Hz


Mains operation





50 Hz

0.85

1.7 kg

1.7 kg

2.16 kg

2.9 kg

3.183 kg

4.35 kg

2.9 kg

4.2 kg

Number of

Lamps

(x)

1

1

1

1

1

1

1

1

Rated

Gear-

Lamp

Power

131

131

135

180

90

91

36

55

Power losses gear

(W)

20.0

22.5

22.5

32.0

10.5

19.5

18.7

16.5

Line

Frequency

(Hz)

50

50

50

50

50

50

50

50

Line

Voltage

(V)

230-240

220-230

220-230

220-240

220-240

220-240

230-240

220-240

T-winding

Qty bulk packing

12

12

10

4

8

8

6

4


27.5 cm x 21 cm x 17.5 cm

27.5 cm x 21 cm x 17.5 cm

33 cm x 20 cm x 13.5 cm

35 cm x 18.5 cm x 15 cm

27.5 cm x 20 cm x 12 cm

42 cm x 20 cm x 8.2 cm

35 cm x 18.5 cm x 15 cm

42 cm x 20 cm x 8.2 cm


Wire cross-section:

On the mains side

Strip length

0.75-2.5 mm 2

6 mm


8711500938411

8711500932129

8711500932068

8711500932242

8711500932280

8711500932204

8711500932228

8711500932167

130

130

130

130

130

130

130

130

EOC

8711500

920034 30

919960 30

919908 30

920393 30

915245 30

919786 30

920072 30

939005 30


(ºC)

70

70

55

55

70

55

55

70

BSX


HID-Basic ballasts for SON and HPI (plus) lamps with Semi-parallel ignitor

HID-Basic BSN

Definition

Impregnated (HID standard) electromagnetic ballasts, of copper/iron construction, for use in combination with an external ignitor; for HID lamps.

Description

●

Orthocyclic winding process results in limited ballast coil volume

● and reduced weight, with minimum watt losses

Ballasts standard equipped with screw terminal blocks

●

●

Earthing while-mounting facility (HID Standard ballasts)

Simple installation and cabling.


●




●

●

Earthing while-mounting facilrty (HID Standard ballasts)


Applications

●

For application with SON, HPI (PLUS) which are used in road

● lighting, public lighting, industry lighting

HID basic ballasts should be restricted to built-in situations where relative humid is limited.


●

Safety EN 60922

●

●

Perfonmance

Quality standard

EN 60923

ISO 9001

●

●

Environmental standard ISO 14001

CE Marking


www.philips.com/OEM,

HPL-N

3.156


Type

BSN70W

BSNI00W

BSNI50W

BSN250W

BSN400W

A1

117

117

125

150

165

A2

102

102

110

135

150

C1

51.5

51.5

64.5

64.5

82.0

D1

6.2

6.2

6.2

6.2

6.2

W

57.1

57.1

75.5

75.5

96.5


Data valid for typical lamps

Ballast

BSN70L3001

BSN70L300ITS

BSN70L301I

BSN70L302I

BSN70L304I

BSN100L300I

BSN100L301I

BSN100L302I

BSN100L304I

BSN150L300I

BSN150L301I

BSN150L301ITS

BSN150L302I

BSN150L302ITS

BSN150L304I

BSN 150L304ITS

BSN250L300I

BSN250L300I

BSN250L301I

BSN250L301I

BSN250L302I

BSN250L304I

BSN400L300I

For lamps Ignitor

SN58TI5

SN58(T5)

SN58

SN58(T5)

SN58

SN58(T5)

SN58

SN58(T5)

SN58

SN58(T5)

SN58TI5

SN58(T5)

SN58(T5)

SN58TI5

SN58TI5

SN58(T5)

SN58(T5)

SN58TI5

SN57

SN58(T5)

SN58(T5)

SN58(T5)

SN57

SN57

SN57

SN57

SN58(T5)

SN58(T5)

SN58(T5)

SN58(T5)

SN58TI5

MH... 150W

SON 250W

HPI-Plus 250W

SON 250W

HPI-Plus 250W

SON 250W

HPI-Plus 250W

SON 250W

HPI-Plus 250W

SON400W

MH... 150W

SON 150W

SON 150W

CDM 150W

MH... 150W

SON 150W

SON 150W

CDM 150W

SON 70W

SON 70W

SON 70W

SON 70W

SON 70W

SON 100W

SON 100W

SON 100W

SON 100W

SON 150W

SON 150W

SON 150W

CDM 150W

Mains

Vol./Freq.

Without PF Correction

V/Hz

Current Nom

A cos Φ

220/50

220/50

220/60

230/50

240/50

220/50

220/60

230/50

240/50

220/50

220/60

220/60

0.98

0.98

0.98

0.98

0.98

1.20

1.20

1.20

1.20

1.80

1.80

1.80

0.35

0.45

0.45

0.45

0.40

0.40

0.35

0.35

0.45

0.45

0.40

0.40

230/50

230/50

230/50

230/50

220/50

220/50

220/60

220/60

230/50

230/50

240/50

240/50

220/50

1.80

1.80

1.80

1.80

BSN400L300I

BSN400L301I

BSN400L302I

HPI-Plus 400W

SON400W

HPI-Plus 400W

SON400W

HPI-Plus 400W

SON400W

SN58

SN58(T5)

SN58

SN58(T5)

SN58

SN58(T5)

220/50

220/60

220/60

230/50

230/50

240/50 BSN400L304I

HPI-Plus 400W SN58 240/50 t.b.a.

For compatibility reasons we advice to use ignitors with Chinese orgin

(those are available on request) t.b.a.

4.45

t.b.a.

4.45

t.b.a.

4.45

3.00

t.b.a.

3.00

t.b.a.

4.45

3.00

t.b.a.

3.00

t.b.a.

0.40

0.40

0.40

0.40

0.45

0.40

0.45

0.45

0.45

0.45

0.40

0.40

0.45

0.40

0.45

0.40

0.45

0.45

0.40

0.45

With PF correction

Cap.

µF/V

12/250

12/250

10/250

12/250

12/250

12/250

12/250

12/250

12/250

18/250

16/250

16/250

Mains

Max.

A.

0.60

0.90

0.90

0.90

0.60

0.60

0.60

0.60

0.90

1.20

1.20

1.20

18/250

18/250

18/250

18/250

1.20

1.20

1.20

1.20

50/250

40/250

40/250

50/250

50/250

50/250

50/250

32/250

32/250

28/250

28/250

32/250

32/250

32/250

32/250

50/250

3.60

3.60

3.60

3.60

3.60

3.60

3.60

2.30

2.30

2.30

2.30

3.60

2.30

2.30

2.30

2.30

0.85

0.85

0.85

0.85

30.0

33.0

33.0

26.5

25.5

25.5

30.0

22.7

22.7

24.5

24.5

26.5

22.2

22.2

21.0

21.0

2.40

2.40

2.40

2.40

2.40

2.40

2.40

1.40

1.40

1.40

1.40

2.40

1.40

1.40

1.40

1.40

Current

Nom.

A.

0.45

0.60

0.60

0.60

0.45

0.45

0.45

0.45

0.60

0.85

0.85

0.85

Ballast Losses

14.2

13.9

13.5

14.8

13.5

13.5

13.0

13.5

15.8

16.3

16.0

16.0

Tw= 130°C

Δt

C

70

70

75

70

70

70

75

75

70

70

70

70

Wiring diagram

Fig.

I

I

I

I

I

I

I

I

I

I

I

I

17.0

17.0

18.0

18.0

70

70

70

70

I

I

I

I t.b.a.

65 t.b.a.

70 t.b.a.

75 t.b.a.

70 t.b.a.

70 t.b.a.

65

70 t.b.a.

70 t.b.a.

I

I

I

I

I

I

I

I

I

I

I

I

I

I

I

I



BSN150L301I

BSN150L301ITS

BSN250L301I

BSN400L301I

BSN70L302I

BSN100L302I

BSN150L302I

BSN150L302ITS

BSN250L302I

BSN400L302I

BSN70L304I

BSN100L304I

BSN150L304I

BSN150L304ITS

BSN250L304I

BSN400L304I

Marking “designed by Philips Lighting B.V. , the Netherlands”


Type Weight Carton packing

Qty pcs

Carton packing

Dimensions l x w x h cm

BSN70L300I

BSN100L300I

BSN150L300I

BSN250L300I

BSN400L300I

BSN70L301I

BSN100L301I

1.1

?

1.2

1.1

1.2

1.85

4.5

4

6

6

6

4

6

6

18.2 x 12.5 x 13.3

18.2 x 12.5 x 13.3

26.0 x 15.0 x 16.1

26.0 x 17.5 x 16.1

22.6 x 19.0 x 19.8

18.2 x 12.5 x 13.3

18.2 x 12.5 x 13.3

1.85

1.85

2.7

4.3

2.7

4.3

1.1

1.2

1.1

1.2

1.85

1.85

1.85

1.85

2.7

4.45

6

4

6

6

6

6

6

4

6

6

6

6

6

4

6

6

26.0 x 15.0 x 16.1

26.0 x 15.0 x 16.1

26.0 x 17.5 x 16.1

22.6 x 19.0 x 19.8

21.0 x 14.8 x 14.2

18.2 x 12.5 x 13.3

26.0 x 15.0 x 16.1

26.0 x 15.0 x 16.1

26.0 x 17.5 x 16.6

22.6 x 19.0 x 19.8

21.0 x 14.8 x 14.2

18.2 x 12.5 x 13.3

26.0 x 15.0 x 16.1

26.0 x 15.0 x 16.1

26.0 x 15.0 x 16.1

22.6 x 19.0 x 19.8

11.5

11.5

17.8

19

16.5

19

7

7.5

7

7.5

11.5

11.5

11.5

11.5

16.5

19

Weight gross kg

7

7.5

11.5

16.5

18.5

7

7.5

EOC

871016303161330

871016303151430

871016303088330

871016303091330

871016303094430

871016303477530

871016303476830

871016303470630

871016303472030

871016303471330

871016303473730

871016303142230

871016303129330

871016303103330

871016303131630

871016303134730

871016303148430

871016303105730

871016303115630

871016303107130

871016303109530

Pallet unit carton/pcs

630

630

504

288

630

630

504

504

288

192

288

192

630

630

630

630

504

504

504

504

288

192

3.158



Marking “Made in China”


Type Weight

BSN70L300I

BSN100L300I

BSN150L300I

BSN250L300I

BSN400L300I

BSN70L301I

BSN100L301I

BSN150L301I

BSN150L301ITS

BSN250L301I

BSN400L301I

BSN100L302I

BSN150L302I

BSN150L302ITS

BSN250L302I

BSN400L302I

BSN1000L302I

BSN70L304I

BSN100L304I

BSN150L304I

BSN150L304ITS

BSN250L304I

BSN400L304I

1.1

1.2

1.2

1.85

1.85

2.7

4.3

1.85

1.85

2.7

4.45

1.1

1.2

1.85

4.5

1.1

1.2

1.85

1.85

2.7

4.3

Carton packing

Qty pcs

6

6

6

4

6

6

6

6

4

6

4

6

6

6

6

6

6

6

6

6

4

Carton packing


18.2 x 12.5 x 13.3

18.2 x 12.5 x 13.3

26.0 x 15.0 x 16.1

26.0 x 17.5 x 16.1

22.6 x 19.0 x 19.8

18.2 x 12.5 x 13.3

18.2 x 12.5 x 13.3

26.0 x 15.0 x 16.1

26.0 x 15.0 x 16.1

26.0 x 17.5 x 16.1

22.6 x 19.0 x 19.8

21.0 x 14.8 x 14.2

18.2 x 12.5 x 13.3

26.0 x 15.0 x 16.1

26.0 x 15.0 x 16.1

26.0 x 17.5 x 16.6

21.0 x 14.8 x 14.2

18.2 x 12.5 x 13.3

26.0 x 15.0 x 16.1

26.0 x 15.0 x 16.1

26.0 x 15.0 x 16.1

22.6 x 19.0 x 19.8

7.5

11.5

11.5

16.5

19

11.5

11.5

16.5

19

Weight gross kg

7

7.5

11.5

16.5

18.5

7

7.5

7

7.5

11.5

11.5

17.8

19


630

504

504

288

192

504

504

288

192

192

630

630

630

630

504

288

630

630

504

504

288

192

871016303147730

871016303104030

871016303114930

871016303106430

871016303108830

EOC

871016303160630

871016303150730

871016303087630

871016303090630

871016303093730

871016303162030

871016303155230

871016303119430

871016303121730

871016303120030

871016303132330

871016303141530

871016303128630

871016303102630

871016303130930

871016303133030

For full information on ignitors mentioned, please refer to separate product data sheet.


HID -Basic ballasts for HPL, HPI (plus) lamps

HID-Basic BHL

Definition

Impregnated (HID standard) electromagnetic ballasts, of copper/ iron construction, for use in combination with an external ignitor, for

HID lamps.

Description

●




●

●

Earthing while-mounting facility (HID Standard ballasts)


Applications

●

For application with HPL, HPI and HPI (plus) lamps such as: industry lighting, flood lighting, sports lighting, shop lighting, public lighting, road lighting

●

HID basic ballasts should be restricted to built-in situations where relative humidity is limited.


●

Safety EN 60922

●

●

Perfonmance

Quality standard

EN 60923

ISO 900I

●

●

Environmental standard ISO 14001

CE Marking,



3.160


Type

BHL 125W

BHL 250W

BHL 400W

A1

117

125

150

A2

102

110

135

C1

51.5

64.5

64.5

D1

6.2

6.2

6.2

W

57.1

75.5

75.5


Data valid for typical lamps

Ballast

BHL 125L200

BHL 125L202

BHL 125L204

BHL 250L200

BHL 250L201

BHL 250L202

BHL 250L204

BHL 400L200

BHL 400L201

BHL 400L202

For lamps

HPL 125W

HPL 125W

HPL 125W

HPL 250W

HPL 250W

HPL 250W

HPL 250W

HPL 250W

HPL 250W

HPL 250W

HPL 250W

HPI 400W

HPI 400W

HPI 400W

HPI 400W

HPI 400W

HPI 400W

HPI 400W

Ignitor

SI51

N.A.

SI51

N.A.

N.A.

N.A.

N.A.

N.A.

SI51

N.A.

SI51

N.A.

SI51

N.A.

SI51

N.A.

SI51

N.A.

Mains

Vol./Freq.

Without PF Correction

V/Hz

Current Nom

A cos Φ

220/50

230/50

240/50

220/50

220/50

220/60

220/60

230/50

230/50

240/50

240/50

220/50

220/50

1.15

1.15

1.15

2.13

2.15

2,13

2,15

2,13

2,15

2,13

2,15

3,25

3,40

0,55

0,0,55

0,55

0,55

0,55

0,55

0,55

0,55

0,55

0,55

0,55

0,60

0,55

220/60

220/60

230/50

230/50

240/50 BHL 400L204

HPI 400W SI51 240/50 3,40

For compatibility reasons we advice to use ignitors with Chinese orgin

(those are available on request)

3,25

3,40

3,25

3,40

3,25

0,60

0,55

0,60

0,55

0,60

0,55

With PF correction

Cap.

µF/V

10/250

10/250

10/250

18/250

18/250

15/250

15/250

18/250

18/250

18/250

18/250

25/250

28/250

20/250

25/250

25/250

28/250

25/250

28/250

Mains

Max.

A.

2,2

2,2

2,2

2,2

1,1

1,1

1,1

2,2

2,2

2,2

2,2

3,9

3,9

3,9

3,9

3,9

3,9

3,9

3,9

Current

Nom.

A.

1,35

1,35

1,35

1,35

0,7

0,7

0,7

1,35

1,35

1,35

1,35

2,15

2,15

2,15

2,15

2,15

2,15

2,15

2,15

Ballast Losses Tw= 130°C

Δt

C

65

75

65

65

70

65

70

70

75

70

75

75

75

70

75

70

75

70

75

17,0

15,5

15,5

18,5

12,2

13,0

13,7

17,0

18,5

20,0

20,0

21,8

23,8

20,0

22,0

21,8

23,8

23,0

25,0

Wiring diagram

Fig.

2

1

2

1

1

1

1

1

2

1

2

1

2

1

2

1

2

1

2

Fig. 1

For full information on ignitors mentioned, please refer to separate product data sheet.

Fig. 2



BHL125L200

BHL250L200

BHL400L200

BHL250L201

BHL400L201

BHL125L202

BHL250L202

BHL400L202

BHL125L204

BHL250L204

BHL400L204

Marking “designed by Philips Lighting B.V. , the Netherlands”


Type Weight Carton packing

Qty pcs

Carton packing


BHL125L200

BHL250L200

BHL400L200

BHL250L201

BHL400L201

BHL125L202

BHL250L202

2.75

1.9

1.9

1.2

1.85

2.9

1.9

6

6

6

6

6

6

6

18.2 x 12.5 x 13.3

27.0 x 16.0 x 17.0

26.0 x 17.5 x 16.1

26.0 x 15.0 x 16.1

26.0 x 17.5 x 16.1

21.0 x 14.8 x 13.3

26.0 x 15.0 x 16.1

BHL400L202

BHL125L204

BHL250L204

BHL400L204

BHL1000L202

2.95

1.22

1.95

2.95

6

6

6

6

6

1

26.0 x 17.5 x 16.1

18.2 x 12.5 x 13.3

26.0 x 15.0 x 16.1

26.0 x 17.5 x 16.1

16.5 x 12.5 x 13.3

Marking “Made in China”


Type Weight

2.75

1.9

1.9

2.95

1.2

1.85

2.9

1.9

1.22

1.95

2.95

Carton packing

Qty pcs

6

6

6

6

6

6

6

6

6

6

6

Carton packing


18.2 x 12.5 x 13.3

27.0 x 16.0 x 17.0

26.0 x 17.5 x 16.1

26.0 x 15.0 x 16.1

26.0 x 17.5 x 16.1

21.0 x 14.8 x 13.3

26.0 x 15.0 x 16.1

26.0 x 17.5 x 16.1

18.2 x 12.5 x 13.3

26.0 x 15.0 x 16.1

26.0 x 17.5 x 16.1

Weight gross kg

12.76

9

17.8

12

18

9

12

12

18

18

9

7


288

630

504

630

504

288

504

288

630

504

288

EOC

871016303168230

871016303097530

871016303100230

871016303468330

871016303469030

871016303169930

871016303125530

871016303113230

871016303170530

871016303111830

871016303127930

871016305800930

Weight gross kg

12

18

18

9

12.76

9

17.8

12

12

9

18


288

630

504

288

630

504

288

504

630

504

288

EOC

871016303167530

871016303096830

871016303099930

871016303117030

871016303118730

871016303169930

871016303124830

871016303112530

871016303170530

871016303110130

871016303126230

3.162




HID ignitors

SUD 10-S/40-S

A3

3.164



●

Electronic ignitors for HID lamps


●

Available in semi-parallel (Pulse), series (Superimposed pulse) and

● parallel versions

Ignitors ensure reliable and smooth starting behaviour

●

●

●

Ignitors equipped as standard with screw terminal blocks

Digital ignitors for highest reliability

All T5 and T15 types incorporate timer to switch off ignitor after 5 or 15 minutes with failing lamp to prevent cycling

●

●

Compact dimensions and light weight

Simple screw or click-fit mounting, or stud mounting for rapid assembly

Applications

●

Similar to those of the related lamps and gears


Safety

Performance

RFI

Harmonic current emissions

EMC immunity

Approval marking

CE-marking


EN 61347-2-1

EN 60927

EN 55015

EN 61000-3-2

EN 61547

ENEC

ISO 14001



Type

SU 10-S \ SU 40-S

SUD 10-S \ SU 40-S

A1Nom

78.0

78.0

A3Nom

62.0

62.0

B1Nom C1Nom

36.0

36.0

32.0

32.0

Type

SI 51 / SI 52 / SN 57 / SN 57T5 / SN 57T15 /

SND 57 / SN 58 / SN 58T5 / SN 58T15 / SND 58

SX 131

HID ignitors

A1Nom

84.5

A2Nom

65.0

B1Nom

41.0

C1Nom D1Nom

38.0

4.3

85.5

41.5

38.5

-

A2

A1

Type

SND 57-S / SN 57T15-S / SI 51-S / SN 57-S

A2

A1

A2

A1

Type

SN 56 / SI 54 / SN 61 / SX 26 / SND 88

A1Nom

89.0

A2Nom

70.0

B1Nom

41.5

C1Nom D1Nom

38.5

4.3

A1Nom

114.5

A2Nom

95.0

B1Nom

41.0

C1Nom D1Nom

38.0

4.3

SND 88/89 SN 58T5-S


HID ignitors

SN 57T5 220-240V

SN 58T15 220-240V

SN 58T15-S 220-240V

SN 58T5 220-240V

SN 58T5-S 220-240V

SN 61 220-240V

SU 10-S 220-240V

SU 40-S 220-240V

SUD 10-S 220-240V

SUD 40-S 220-240V

SX 131 220-240V

SX 26 220-240V

SX 70 220-240V

SX 72 220-240V

SX 73 220-240V

SX 74 220-240V

SI 51 220-240V

SI 51-S 220-240V

SI 52 220-240V

SI 54 360-415V

SN 56 220-240V

SN 57 220-240V

SN 58 220-240V

SN 59 220-240V

SND 57-S 220-240V

SND 57 220-240V

SND 58 220-240V

SND 88 400V

SND 90 480V

SN 57T15 220-240V

Electrical data

Type Rated

Gear-

Lamp

Power

250/400

1000

250/400

2000

1000/1800

50/70

35-400

1000/1800

50/70

50/70

35-600

600

600

50/70

50/70

100-400

131

26/35

90

36/55

180

91/135

50/70

35-250

35-250

100-600

100-400

1000/1800

50/70

100-400

Number of

Lamps

(x)

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1

Line

Frequency

(Hz)

50/60

50/60

50/60

50/60

60

50/60

50/60

50/60

50/60

50/60

50/60

50/60

50/60

50/60

50/60

50/60

50/60

50/60

50/60

50/60

50/60

50/60

50/60

50/60

50/60

50/60

50/60

50/60

50/60

50/60

Power losses gear

(W)

1.0

0.5

1.0

1.5

1.5

1.0

1.0

0.5

0.5

1.0

1.0

1.0

1.0

1.0

1.0

1.0

1.0

1.0

1.0

3.0

1.0

1.0

1.0

1.5

1.0

3.0

1.0

1.0

1.0

1.0

Response voltage

(V)

195

195

195

290

370

195

198

195

190

196

190

190

190

330

198

198

198

198

198

198

-

-

195

190

198

198

195

195

195

195

Line

Voltage

(V)

220-240

220-240

220-240

400

480

220-240

220-240

220-240

220-240

360-415

220-240

220-240

220-240

220-240

220-240

220-240

220-240

220-240

220-240

220-240

220-240

220-240

220-240

220-240

220-240

220-240

220-240

220-240

220-240

220-240

T-case maximum

(ºC)

80

80

80

90

80

80

90

80

60

80

80

80

80

80

80

80

80

80

105

105

80

80

105

105

80

80

80

80

80

80

T-ambient

-20/70

-20/70

-20/75

-20/75

-20/75

-20/75

-20/75

-20/75

-20/75

-20/75

-20/75

-20/75

-20/75

-20/75

-20/70

-20/70

-20/75

-20/85

-20/75

-20/75

-20/75

-20/75

-20/75

-20/75

-20/75

-20/75

-20/55

-20/75

-20/85

-20/75

Cable-Cap wires device/lamp

(nF)

-

-

-

-

1

-

2

4

10

2

150

150

35

120

5

2

5

5

5

5

-

-

0.2

0.2

2

4

1

2

2

1

Number of ignition pulses

(x)

-

-

-

-

2

-

2

2

2

2

1

1

1

1

-

-

-

-

-

-

-

-

2

2

2

1

2

2

2

2

Ignition

Voltage

(kV)

2.5

5.0

5.0

5.0

5.0

2.50

5.00

2.50

5.00

5.00

0.75

0.75

0.75

1.5

1.2

1.0

1.4

1.4

2.3

5.0

1.4

1.0

5.00

5.00

2.50

5.00

2.50

5.00

5.00

5.00

3.166


HID ignitors


Type

SI 51 220-240V 50/60Hz

SI 51-S 220-240V 50/60Hz

SI 52 220-240V 50/60Hz

SI 54 360-415V 50/60Hz

SN 56 220-240V 50/60Hz

SN 57 220-240V 50/60Hz

SN 57-S 220-240V 50/60Hz

SN 58 220-240V 50/60Hz

SN 58-S 220-240V 50/60Hz

SN 59 220-240V 50/60Hz

SND 57 220-240V 50/60Hz

SND 57-S 220-240V 50/60Hz

SND 58 220-240V 50/60Hz

SND 58-S 220-240V 50/60Hz

SND 88 400V 50/60Hz

SND 89 400V 50/60Hz

SND 90 480V 60Hz

SND 91 480V 60Hz

SND 91 480V 60Hz

SN 57T15 220-240V 50/60Hz

SN 57T15-S 220-240V 50/60Hz

SN 57T5 220-240V 50/60Hz

SN 58T15 220-240V 50/60Hz

SN 58T15-S 220-240V 50/60Hz

SN 58T5 220-240V 50/60Hz

SN 58T5-S 220-240V 50/60Hz

SN 61 220-240V 50/60Hz

SU 10-S 220-240V 50/60Hz

SU 40-S 220-240V 50/60Hz

SUD 10-S 220-240V 50/60Hz

SUD 40-S 220-240V 50/60Hz

SX 131 220-240V 50/60Hz

SX 26 220-240V 50/60Hz

SX 70 220-240V 50/60Hz

SX 72 220-240V 50/60Hz

SX 73 220-240V 50/60Hz

SX 74 220-240V 50/60Hz

SX 76 220-240V 50/60Hz

EAN code

1 piece

8711500915535

8711500747495

8711500915542

8711500915481

8711500915603

8711500915559

8711500060525

8711500915566

8711500741752

8711500915573

8711500930668

8711500930729

8711500930682

8711500930705

8711500910349

8711500910363

8711500931740

8711500934062

8711500934062

8711500744692

8711500745972

8711500743152

8711500743176

8711500745934

8711500742995

8711500745958

8711500916396

8711500537836

8711500537911

8711500931443

8711500930354

8711500915894

8711500915900

8711500915498

8711500915610

8711500920058

8711500915696

8711500916402

Weight

0.047 kg

0.051 kg

0.06 kg

0.05 kg

0.05 kg

0.053 kg

0.07 kg

0.07 kg

0.062 kg

0.064 kg

0.064 kg

0.046 kg

0.048 kg

0.083 kg

0.078 kg

0.04 kg

0.042 kg

0.04 kg

0.044 kg

0.072 kg

0.05 kg

0.15 kg

0.15 kg

0.065 kg

0.081 kg

0.086 kg

0.081 kg

0.06 kg

0.09 kg

0.094 kg

0.046 kg

0.049 kg

0.049 kg

0.046 kg

0.049 kg

0.066 kg

0.14 kg

0.15 kg


25.2 cm x 18 cm x 17.4 cm

20 cm x 17.5 cm x 11 cm

25.2 cm x 18 cm x 17.4 cm

23.5 cm x 22.5 cm x 10 cm

23.5 cm x 22.5 cm x 10 cm

25.2 cm x 18 cm x 17.4 cm

20 cm x 17.5 cm x 11 cm

25.2 cm x 18 cm x 17.4 cm

20 cm x 17.5 cm x 11 cm

23.5 cm x 22.5 cm x 10 cm

25.2 cm x 18 cm x 17.4 cm

20 cm x 17.5 cm x 11 cm

25.2 cm x 18 cm x 17.4 cm

20 cm x 17.5 cm x 11 cm

43 cm x 23.5 cm x 26 cm

43 cm x 23.5 cm x 26 cm

43 cm x 23.5 cm x 26 cm

23.5 cm x 22.5 cm x 10 cm

43 cm x 23.5 cm x 26 cm

25.2 cm x 18 cm x 17.4 cm

20 cm x 17.5 cm x 11 cm

25.2 cm x 18 cm x 17.4 cm

25.2 cm x 18 cm x 17.4 cm

20 cm x 17.5 cm x 11 cm

25.2 cm x 18 cm x 17.4 cm

20 cm x 17.5 cm x 11 cm

23.5 cm x 22.5 cm x 10 cm

23 cm x 17 cm x 13 cm

23 cm x 17 cm x 13 cm

23 cm x 17 cm x 13 cm

22.5 cm x 17 cm x 13 cm

25.2 cm x 18 cm x 17.4 cm

23.5 cm x 22.5 cm x 10 cm

23.5 cm x 22.5 cm x 10 cm

23.5 cm x 22.5 cm x 10 cm

25.2 cm x 18 cm x 17.4 cm

23.5 cm x 22.5 cm x 10 cm

23.5 cm x 22.5 cm x 10 cm

Qty bulk packing

48

20

48

120

120

20

120

20

120

20

48

48

20

20

48

48

20

48

20

20

20

48

20

20

20

20

48

20

30

30

30

30

20

20

20

48

48

48

EOC

8711500

915535 30

747495 30

915542 30

930729 30

930682 30

930705 30

910349 40

910363 40

931740 40

934062 30

934062 40

744692 30

745972 30

915481 30

915603 30

915559 30

060525 30

915566 30

741752 30

915573 30

930668 30

931443 30

930354 30

915894 30

915900 30

915498 30

915610 30

920058 30

915696 30

916402 30

743152 30

743176 30

745934 30

742995 30

745958 30

916396 30

537836 30

537911 30


8711500908353

8711500747501

8711500908377

8711500908339

8711500907530

8711500907547

8711500060532

8711500907554

8711500741769

8711500913487

8711500930675

8711500930736

8711500930699

8711500930712

8711500910356

8711500910370

8711500932006

8711500934079

8711500934697

8711500744708

8711500745989

8711500743169

8711500743183

8711500745941

8711500743008

8711500745965

8711500907585

8711500537843

8711500537928

8711500931450

8711500930361

8711500908230

8711500914385

8711500914378

8711500914361

8711500908209

8711500914354

8711500914330


HID ignitors

SX 131/73

SND

SI 52

SU/SUD

3.168


SN 61

SI 51/51-S/54

SN 50/56/57/57-S/58/58-S/59

SX 70/72/74/76

HID ignitors


Recommended HID Lamp and Gear combination

Lamp

Commercial name


MASTER Colour City CDO-T(T)/ET

MASTER SON-T PIA PLUS

MASTER SON PIA PLUS

MASTER SON-T PIA

SON-I

SON-H

MASTER HPI PLUS

HPI-T

HPL-N

MASTER MHN-SA

MASTER MHN-LA

SOX

MASTER SOX-E

Technical name

CPO-TW 45W

CPO-TW 60W

CPO-TW 90W

CPO-TW 140W

CDO 70W

CDO 100W

CDO 150W

SON 50W

SON 70W

SON 100W

SON 150W

SON 250W

SON 400W

SON 600W

SON 600W-400V

SON 1000W

SON-I 50W

SON-I 70W

SON-H 110W

SON-H 220W

SON-H 350W

HPI PLUS 250W BU

HPI PLUS 400W BU

HPI PLUS 400W BUS

HPI-T 1000W/230V

HPI-T 2000W/220-240V

HPI-T 2000W/380-415V

HPL-N 50W

HPL-N 80W

HPL-N 125W

HPL-N 250W

HPL-N 400W

HPL-N 1000W/230V

MHN-SA 1800W/230V

MHN-SA 1800W/400V

MHN-SA 2000W/400V

MHN-LA 1000W/230V

MHN-LA 2000W/400V

SOX 35W

SOX 55W

SOX 90W

SOX 135W

SOX 180W

SOX-E 18W

SOX-E 26W

SOX-E 36W

SOX-E 66W

SOX-E 91W

SOX-E 131W

EXC 035

EXC 055

EXC 036

EXC 066

EXC 091

Electronic solution

Dimmable electronic

HID-DV LS-6/8/10 Xt 60 S CPO-TW

HID-DV 1-10V 070 S CDO

HID-DV 1-10V 100 S CDO or HID-DV DALI 100-150 S CDO/SON/SDW

HID-DV 1-10V 150 S CDO or HID-DV DALI 100-150 S CDO/SON/SDW

HID-DV 1-10V 070 S SON



Fixed-output electronic

HID-PV Xt 45 S CPO

HID-PV Xt 60 S CPO

HID-PV Xt 90 S CPO

HID-PV Xt 140 S CPO

HID-PV 070 SON/CDO

HID-PV 100 SON/CDO

HID-PV 150 SON/CDO

HID-PV 070 SON/CDO

HID-PV 100 SON/CDO

HID-PV 150 SON/CDO

* no Philips ignitor

3.170


Electro-magnetic solution

Electro-magnetic gear

BSX 35

BSX 55

BSX 90

BSX 135

BSX 180

BSX 18

BSX 26

BSX 36

BSX 66

BSX 91

BSX 131

BSN 70 TS

BSN 100 TS

BSN 150 TS

BSN 50

BSN 70

BSN 100

BSN 150

BSN 250

BSN 400

BSN 600 TS

BSN 600 L 309 ITS

BSN 1000

BSN 50

BSN 70

BHL 125

BHL 250

BHL 400

BHL 250

BHL 400

BHL 400

BHL 1000

BHL 2000 L78

BHL 2000 L76

BHL 50

BHL 80

BHL 125

BHL 250

BHL 400

BHL 1000

BMH 1800 L78

BHD 2000 L76

BHD 2000 L76

BSN 1000

BHD 2000 L76

Ignitor

SX 26

SX 72

SX 76

SX 74

SX 73

SX 26

SX 26

SX 26

SX 76

SX 74

SX 131

-

-

-

-

-

SN56/SN59

380MZN2000 *

380MZN2000 *

SN56/SN59

380MZN2000 *

-

-

-

-

-

-

SI 51

SI 51

SI 52

SI 52

SI 54

SN(D) 57

SN(D) 58

SN(D) 58

SN(D) 57

SN(D) 57

SN(D) 58

SN(D) 58

SN(D) 58

SN(D) 58

SN(D) 58

SND 88 / SND 89

SN 56 / SN 59

Recommended HID Lamp and Gear combination

Capacitor

10uF/250V

12uF/250V

10uF/250V

18uF/250V

25uF/250V

18uF/250V

25uF/250V

25uF/250V

65uF/250V

125uF/250V

35uF/250V

7uF/250V

8uF/250V

10uF/250V

18uF/250V

25uF/250V

65uF/250V

200uF/250V

75uF/450V

70uF/450V

100uF/250V

65uF/450V

12uF/250V

12uF/250V

18uF/250V

10uF/250V

12uF/250V

12uF/250V

18uF/250V

32uF/250V

45uF/250V

60uF/250V

20uF/450V

100uF/250V

“

“

“

“

“

“

“

“

“ ballasttype dependend, see technical data

“


Philips 220-230-240V, 380-400-415V User Manual

HID Lamps and Gear

HID Lamps

HID Control Gear

Related manuals

Table of contents

Philips 220-230-240V, 380-400-415V User Manual

HID Lamps and Gear

HID Lamps

HID Control Gear

Related manuals

Saxby Lighting

92515

Saxby Lighting

92311

SLV

175160

Qazqa

Corda HL 45

Case Logic

UNP0B

BEGA

13 192

Hydro Crunch

315WAIRCOOL-KIT

Hydro Crunch

K1-B1-R01-NL01

Hydro Crunch

KDCMHR17-630-3K

Toshiba

LDRA0940MU5EU

Toshiba

LDRA0930WU5EU

Philips

MASTER SOX-E 18W BY22d 1SL

Table of contents