LZR®-MICROSCAN T
STAND-ALONE, DOOR-MOUNTED,
SWING DOOR SAFETY SYSTEM
DESCRIPTION
BEA’s LZR ® -MICROSCAN T is a LASER-based sensor system designed for automatic swing doors.
Utilizing Time-of-Flight technology, the LZR ® -MICROSCAN T eliminates the limitations of infrared-based devices. Its background independence eliminates nuisance detections caused by changing weather and floor conditions, while gyroscopes sense the movement of the door for accurate positioning.
The LZR ® -MICROSCAN T provides adjustable pattern depths that exceed the ANSI 156.10 8.2.2.3 standard and offer 100 percent coverage in all door states (fully open, fully closed, opening and closing).
APPLICATIONS
Fully Closed In Motion – Self Adapting Curtain
TECHNICAL SPECIFICATIONS
Technology
Detection Mode
Min. / Max. Door Width
Mounting Height
LASER scanner, Time-of-Flight measurement
Presence
20 – 48”
(measured from leading edge to sensor LED)
75 – 98”
(measured from finished floor to sensor LED)
> 2% Remission Factor
Angular Resolution
Testbody
Emission Characteristics
IR LASER
Supply Voltage
Power Consumption
Response Time
Output Rating
Input Rating
Test Input*
Temperature Range
Degree of Protection
2.56°
28" (H) × 12" (W) × 8" (D)
Wavelength 905 nm; Maximum Output Pulse Power
35 W (Class I)
12 – 30 VDC (15 W Class II)
< 15 W
Typ. 40 ms; Max. 80 ms
4 electro-mechanic relays
(galvanic isolated - polarity free)
All outputs Class 2 supply, 12 – 24 VAC, 12 – 30 VDC,
Max. 15 W
2 optocouplers (galvanic isolated - polarity free)
12 – 24 VAC, 50 / 60 HZ, 12 – 30 VDC, Max. 15 W
8 – 15 VDC
-13 – 121 °F (-25 – 55 °C)
Hub: IP20 / NEMA 1
Sensor: IP53 / NEMA 3
Humidity
Vibrations
Material
0 – 95% Non-condensing
< 2 G
PC / ASA
Norm Conformity EN 60825-1-Eye-safety class 1 IR LASER (905 nm),
UL 10B/C Fire Rated 3 hrs (file #R39071)
Mounting Angle (rotational) 35° fixed
Tilt Angle
Pollution on Front Screens
0 – 5° (for angles less than 5° contact Technical
Support)
Maximum 30%; Homogenous
5”
In Motion – Learns Guiderails Fully Open With Threshold Protection 2”
2 11 ∕
16
”
DISCLAIMER Information is supplied upon the condition that the persons receiving it will make their own determination as to its suitability for their purposes prior to use. In no event will BEA be responsible for damages of any nature whatsoever resulting from the use of or reliance upon information from this document or the products to which the information refers. BEA has the right without liability to change descriptions and specifications at any time.
WWW.BEASENSORS.COM
BEA AMERICAS / RIDC Park West / 100 Enterprise Drive / Pittsburgh, PA
T 1-800-523-2462 / F 1-888-523-2462 / E [email protected]
