Brother DSmobile DS-640, DSmobile DS-740D Quick Setup Manual

DSmobile DS-640/DS-740D/DS-940DW
Quick Setup Guide
The latest manuals are available at support.brother.com/manuals.
• Not all models are available in all countries.
• Thank you for choosing Brother. Your support
is important to us and we value your business.
Your Brother product is engineered and
manufactured to the highest standards to deliver
reliable performance, day-in and day-out.
Please read the Product Safety Guide, located in this document, before you set up your machine. After
reading this guide, keep it in a safe place.
WARNING
1
WARNING indicates a potentially hazardous situation which, if not avoided, could result in
death or serious injuries.
Unpack the machine and check the components
The components included in the box may differ depending on your country. Remove the protective tape
and film covering the machine.
WARNING
This product is packaged in a plastic bag. To avoid suffocation, keep
plastic bags away from babies and children. Do not use the bag in
cribs, beds, carriages, or play pens. The bag is not a toy.
NOTE
USB 3.0
(Micro) Cable
Calibration Sheet
2
Quick Setup
Guide/Product
Safety Guide
Warranty Card
• To establish a local connection to a computer, use the included
USB 3.0 (Micro) cable.
• For detailed instructions, see the Online User’s Guide at
support.brother.com/manuals.
• We recommend saving the original packaging in case you must ship
your machine.
For Network Users
Best practice is to configure a unique admin password for any network
device.
We recommend changing your machine's default password, initpass,
in order to use network tools/utilities securely.
Connect your machine to the computer using a USB cable
DSmobile DS-640/DS-740D
The scanner powers on when you connect the USB cable.
DSmobile
DS-640
DSmobile
DS-740D
DSmobile DS-940DW
The scanner starts charging when you connect the USB cable.
Please use the scanner after the rechargeable Li-ion battery is fully charged (the
Battery LED blinks in green).
Press
to turn on the machine.
3
Insert a microSD memory card into the machine
(microSD memory card not included; DSmobile DS-940DW only)
If you plan to save files to an external microSD memory card (optional),
gently insert the microSD memory card into the scanner's Memory Card
Slot with the metal contact points facing upward.
NOTE
A microSD memory card is not required for use. If you plan to save scans directly to a memory card, you must
purchase a microSD memory card separately and insert it into the device. For microSD memory card specifications,
see the Online User's Guide at support.brother.com/manuals.
USA Version A
1
4
Install software
A Using your scanner with your computer
NOTE
Make sure that your computer is ON and you are logged on with Administrator rights.
Mac and Windows
Download the full driver and software package.
For Windows: support.brother.com/windows
For Mac: support.brother.com/mac
Follow the on-screen
instructions to continue
installation.
Finish
NOTE
• When finished, restart your computer.
• For detailed scanning instructions, see the Online User’s Guide at support.brother.com/manuals.
• (USA only) For Mac and Windows computers, internet connection is required. If necessary, contact Brother Customer
Support at 1-877-BROTHER (877-276-8437) to request a Brother Installation Disc to install the driver and software package.
B Using your scanner with your mobile device (Wi-Fi® connection to network - DSmobile DS-940DW only)
Download our free application,
Brother iPrint&Scan, from your favorite
app store using your mobile device.
Activate the Wi-Fi
function on your
mobile device and
search for the
scanner.
On your mobile device,
select your scanner's
SSID DIRECT-xxDS940DW_BRxxxx.
Slide the Mode Select Switch to
Enter the Network Key (Password)
when it is requested.
(SSID and Network Key are
printed on the label attached to
the bottom of the scanner.)
.
Finish
Confirm the scan mode before scanning (DSmobile DS-940DW only)
Before you start scanning, confirm the scan mode is correct.
microSD Mode
: sends scanned data to the microSD memory card inserted
USB Mode
: sends scanned data to the computer using a USB cable
Wi-Fi Mode
: sends scanned data to the computer or mobile device using a wireless connection
LED Indications
For more information about troubleshooting your machine, see the Online User’s Guide.
DSmobile DS-640/DS-740D
• Cover is open
• Paper Jam
Blinks in orange
DSmobile DS-940DW
• Cover is open
• Paper Jam
• Connection Error
Blinks in orange
MicroSD memory card
is not inserted (only
when the machine is
in microSD Mode)
Blinks in white
Wi-Fi Connection Error
(only when the machine
is in Wi-Fi Mode)
Blinks in orange
Blinks in blue
NOTE
Brother SupportCenter is a mobile app that provides the latest support information for your Brother product.
Visit the App Store or Google Play™ to download and install it on your mobile device.
2
Product Safety Guide
Failure to follow these instructions may result in
an increased risk of personal injury or damage to
property, including through fire, electrical shock,
burns or suffocation.
Compilation and Publication
Symbols and conventions
used in the documentation
The contents of this manual and the specifications of
this product are subject to change without notice.
The following symbols and conventions are used
throughout the documentation.
DANGER
DANGER indicates an imminently hazardous situation
which, if the product is handled without following the
warnings and instructions, will result in death or serious
injuries.
WARNING
WARNING indicates a potentially hazardous situation
which, if not avoided, could result in death or serious
injuries.
CAUTION
Under the supervision of Brother Industries, Ltd., this
manual has been compiled and published, covering
the latest product descriptions and specifications.
Brother reserves the right to make changes without
notice in the specifications and materials contained
herein and shall not be responsible for any damages
(including consequential) caused by reliance on
the materials presented, including but not limited
to typographical and other errors relating to the
publication.
Choosing a location
Put your machine on a flat, level, stable surface
that is free of vibration and shocks, such as a
desk. Choose a location where the temperature
remains between 41 °F and 95 °F (5 °C and 35 °C)
and the humidity is between 20 to 80% (without
condensation).
CAUTION indicates a potentially hazardous situation
which, if not avoided, may result in minor or moderate
injuries.
IMPORTANT
IMPORTANT indicates a potentially hazardous situation
which, if not avoided, may result in damage to property
or loss of product functionality.
NOTE
Notes tell you how you should respond to a situation that
may arise or give tips about how the operation works
with other features.
Prohibition icons indicate actions that must not
be performed.
This icon indicates that flammable sprays may
not be used.
This icon indicates that organic solvents, alcohol,
or other liquids may not be used.
Electrical Hazard icons alert you to possible
electrical shock.
Fire Hazard icons alert you to the possibility of
fire.
Follow all warnings and instructions marked on the
machine.
3
Product Safety Guide
DANGER
(DSmobile DS-940DW only)
Use the rechargeable Li-ion battery only for its
intended purpose.
(DSmobile DS-940DW only)
To charge the rechargeable Li-ion battery, connect
your scanner to your computer using the Micro
USB cable (included).
(DSmobile DS-940DW only)
DO NOT charge the rechargeable Li-ion battery
near a fire or in direct sunlight. This could activate
the protection circuitry, which is designed to prevent
danger from high heat. Activation of the protection
circuitry could cause charging to stop, charging
to occur with excessive current or voltage if the
protection circuitry fails, or an abnormal chemical
reaction within the rechargeable Li-ion battery.
(DSmobile DS-940DW only)
Do not connect the + and - terminals with metal
objects such as wire. Do not carry or store the
rechargeable Li-ion battery with metal objects.
(DSmobile DS-940DW only)
Keep the rechargeable Li-ion battery away from
heat and fire.
(DSmobile DS-940DW only)
DO NOT use or leave a scanner with the
rechargeable Li-ion battery installed near fire,
heaters, or other high-temperature (above
140 °F/60 °C) locations.
(DSmobile DS-940DW only)
DO NOT allow the rechargeable Li-ion battery to
come into contact with liquids.
DO NOT use in corrosive environments, such as
areas where salty air, salt water, acids, alkalis,
corrosive gases, chemicals, or any corrosive liquid
are present.
4
(DSmobile DS-940DW only)
DO NOT use the rechargeable Li-ion battery if it is
damaged or leaking.
(DSmobile DS-940DW only)
DO NOT solder any connections to the
rechargeable Li-ion battery.
(DSmobile DS-940DW only)
DO NOT directly connect the rechargeable Li-ion
battery to a household electrical supply.
(DSmobile DS-940DW only)
Liquid (electrolyte) leaking from the scanner or
rechargeable Li-ion battery may indicate that the
rechargeable Li-ion battery is damaged. If the
rechargeable Li-ion battery leaks, immediately
discontinue use of the scanner, unplug the cable,
and isolate the scanner by putting it in a bag.
Do not touch the electrolyte. If liquid from the
rechargeable Li-ion battery gets into your eyes,
wash them immediately with clean water. Contact
emergency services immediately. If left alone, the
electrolyte could cause eye damage. If electrolyte
contacts your skin or clothing, immediately rinse
them with water.
(DSmobile DS-940DW only)
DO NOT put the rechargeable Li-ion battery, or
a scanner with the rechargeable Li-ion battery
installed, into a microwave oven or a high
pressure container.
(DSmobile DS-940DW only)
If the scanner can only be used for a short
period of time, even though the rechargeable
Li-ion battery is fully charged, the rechargeable
Li-ion battery may have reached the end of
its service life. When removing and disposing
the rechargeable Li-ion battery, cover the
rechargeable Li-ion battery terminals with tape
to avoid creating a short in the battery. DO NOT
dispose the rechargeable Li-ion battery with
household waste.
Product Safety Guide
(DSmobile DS-940DW only)
DO NOT disassemble or modify the rechargeable
Li-ion battery.
(DSmobile DS-940DW only)
DO NOT dispose of the rechargeable Li-ion
battery in fire or intentionally overheat. This could
cause the internal insulation to melt, gas to be
emitted, or safety mechanisms to fail. Additionally,
the electrolyte solution could catch fire.
(DSmobile DS-940DW only)
DO NOT puncture the rechargeable Li-ion
battery with any objects, subject it to severe
shocks or throw it. Damage to the rechargeable
Li-ion battery's protection circuit could cause the
rechargeable Li-ion battery to be recharged at an
abnormal current/voltage or cause an abnormal
chemical reaction within the rechargeable Li-ion
battery.
(DSmobile DS-940DW only)
DO NOT incinerate the rechargeable Li-ion battery
or dispose of it with household waste.
WARNING
(DSmobile DS-940DW only)
Keep the rechargeable Li-ion battery away from
infants. If ingested, contact emergency services
immediately.
Store the USB cable bundled and out of the reach
of children to avoid the risk of injury.
DO NOT disassemble or modify the scanner,
otherwise a fire or electric shock may occur. If
the scanner requires repair, contact your Brother
dealer or Brother customer service.
(DSmobile DS-940DW only)
Stop using the rechargeable Li-ion battery if there
are noticeable abnormalities such as smell, heat,
deformities, or discoloration. Turn the power
switch off immediately and remove the USB cable
from the power source.
In the event that foreign material enters the
scanner, turn the power switch off immediately and
remove the USB cable. Contact the store where
this scanner was purchased. This may result in a
fire, electric shock, or device failure.
DO NOT place the scanner near radiators,
heaters, air conditioners, water, chemicals
or devices that contain magnets or generate
magnetic fields. Doing so may create the risk
of a short circuit or fire should water come into
contact with the scanner (including condensation
from heating, air conditioning, and/or ventilation
equipment that may be sufficient to create a short
circuit or fire).
DO NOT place the scanner near chemicals or in
a place where chemical spillage could occur. In
particular, organic solvents or liquids may cause
the casing and/or cables to melt or dissolve,
risking a fire or electrical shock. They may also
cause the scanner to malfunction or become
discolored.
Plastic bags are used in the packaging of the
scanner. To avoid danger of suffocation, keep
these plastic bags away from babies and children.
Plastic bags are not toys.
DO NOT expose the scanner to direct sunlight,
excessive heat, open flames, corrosive gasses,
moisture or dust. DO NOT place the scanner on a
carpet or rug, as this will expose it to dust. Doing
so may create a risk of an electrical short or fire.
It may also damage the scanner and/or render it
inoperable.
5
Product Safety Guide
If the scanner becomes unusually hot, releases
smoke, generates any strong smells, or if you
accidentally spill any liquid on it, immediately
unplug the scanner from the power source.
Contact your Brother dealer or Brother customer
service.
DO NOT place the scanner on an unstable or
tilted cart, stand, or table, or on any tilted/slanted
surface. The machine may fall, causing injury to
you and serious damage to the scanner. There is
an added risk of injury if the scanner glass should
break.
DO NOT use flammable substances, any type of
spray, or an organic solvent/liquid that contains
alcohol or ammonia to clean the inside or outside
of the scanner. Doing this may cause a fire or
electrical shock.
Do not place heavy objects on the scanner. It may
cause unbalance and the device may fall down.
This may result in injury.
CAUTION
Strong jolts, i.e. drop, being stepped on, etc., may
damage the scanner. This may result in injury. In
the event that the scanner is damaged, turn the
power switch off immediately, remove the USB
cable from the outlet. Contact the store where this
scanner was purchased.
Avoid placing the scanner in a high-traffic area. If
you must place it in a high-traffic area, ensure that
the scanner is in a safe location where it cannot
be accidentally knocked over, which could cause
injury to you or others and serious damage to the
scanner.
Ensure that cables and cords leading to the
scanner are secured so as not to pose a tripping
hazard.
Make sure that no part of the scanner protrudes
from the desk or stand where the scanner is
located. Make sure that the scanner is located on
a flat, level, and stable surface free from vibration.
Failure to observe these precautions could cause
the scanner to fall, causing an injury.
6
Be cautious when you handle paper. Edges of
paper may cut your hands.
IMPORTANT
• If the machine does not operate normally when
the operating instructions are followed, adjust
only those controls that are covered by the
operating instructions. Improper adjustment of
other controls may result in damage or minor
exposure to electromagnetic waves and will
often require extensive work by a qualified
technician to restore the machine to normal
operation.
• Do not use the device in locations where
temperature changes are extreme. The
resulting condensation may result in device
failure or malfunction. In the event of
condensation, use only after drying the device
naturally.
(DSmobile DS-940DW only)
ATTENTION:
The product you have purchased is
powered by a Lithium Ion battery that
is recyclable. At the end of its useful
life, under various state and local laws,
it is illegal to dispose of this battery into
your municipal waste stream. Please
call 1-800-8-BATTERY for information
on how to recycle this battery.
Product Safety Guide
Important safety
instructions
DO NOT attempt to service the scanner yourself
because disassembling the scanner may expose you
to dangerous voltage points and other risks and may
void your warranty. Refer all servicing to a Brother
Authorized Service Center. For the location of your
nearest Brother Authorized Service Center, contact:
In USA: 1-877-BROTHER (1-877-276-8437)
In Canada: www.brother.ca/support
Rechargeable Li-ion
battery (DSmobile
DS-940DW only)
• At the time of purchase, the rechargeable Li-ion
battery is slightly charged so that the operation
of the scanner can be verified; however, the
rechargeable Li-ion battery should be fully charged
via the USB port before the scanner is used.
• If the scanner will not be used for a long period
of time, store it in a location where it is not
exposed to high humidity or high temperatures
(temperatures between 59 °F/15 °C and
77 °F/25 °C and 40 to 60% humidity are
recommended). In order to maintain the efficiency
and life of the rechargeable Li-ion battery, charge it
at least every three months.
• If you notice anything unusual about the
rechargeable Li-ion battery the first time it is used,
for example overheating or rust, DO NOT continue
to use the battery. Contact your Brother dealer or
Brother customer service.
Tips on using the
rechargeable Li-ion battery
(DSmobile DS-940DW
only)
• Charge the rechargeable Li-ion battery before use.
Do not use the scanner until the rechargeable Liion battery has been fully charged.
• The rechargeable Li-ion battery charging can take
place in 41~102 °F (5~39 °C) environments. If the
surrounding temperature is out of this range, the
rechargeable Li-ion battery will not be charged,
and the battery indicator will remain lit.
• If the scanner is used when both the rechargeable
Li-ion battery is installed and the scanner is
connected to your computer, charging may stop
even if the rechargeable Li-ion battery has not
been fully charged.
Rechargeable Li-ion
battery characteristics
(DSmobile DS-940DW
only)
Understanding the properties of the rechargeable
Li-ion battery will allow you to optimize its usage.
• Using or storing the rechargeable Li-ion battery
in a location exposed to high or low temperatures
may accelerate its deterioration. In particular,
using a rechargeable Li-ion battery with a high
charge (90% or more) in a location exposed to
high temperatures will considerably accelerate
battery deterioration.
• Using the scanner while the rechargeable Li-ion
battery is installed and charging may accelerate
the battery’s deterioration.
• We recommend charging the scanner every
three months to maintain the efficiency and life of
the rechargeable Li-ion battery.
• If you touch a part of the scanner while the
rechargeable Li-ion battery is charging, that part
of the scanner may feel warm. This is normal, and
the scanner may be used safely. If the scanner
becomes extremely hot, discontinue use.
Surroundings temperature range
Charge
32~113 °F
(0~45 °C)
Standard discharge current 0.24 A
14~140 °F
(-10~60 °C)
Maximum discharge current 1.2 A
32~140 °F
(0~60 °C)
Battery
(Installed)
Less than
1 month
-4~113 °F
(-20~45 °C)
Less than
3 month
-4~95 °F
(-20~35 °C)
Less than
1 year
-4~77 °F
(-20~25 °C)
Charging parameters
Maximum charging voltage
4.35 Vdc
Maximum charging current
1200 mA
7
Product Safety Guide
How to remove
and dispose of the
rechargeable Li-ion battery
(DSmobile DS-940DW only)
Turn off the machine and remove the USB cable from the
machine before removing the rechargeable Li-ion battery.
1. Place the machine face down and remove the Side
Cover using a flathead screwdriver.
2. Disconnect the rechargeable Li-ion battery connector
from the Printed Circuit Board Assembly (PCBA). Do
not disconnect the Flexible Flat Cable (FFC).
3. Push the release tab (as illustrated) to remove the
rechargeable Li-ion battery from the Side Cover.
4. Cover the rechargeable Li-ion battery terminals with
tape and dispose according to your local recycling laws.
1
2
3
4
NOTE
• We do not recommend removing the rechargeable
Li-ion battery unless disposing the scanner.
• For more information about handling the
rechargeable Li-ion battery, see the applicable
instructions and warnings in this guide.
Regulation
IMPORTANT
• Brother cannot accept any financial or other
responsibilities that may be the result of your use
of this information, including direct, special or
consequential damages. There are no warranties
extended or granted by this document.
• This machine has been certified to comply with
FCC standards, which are applied to the USA only.
8
Federal Communications
Commission (FCC)
supplier’s Declaration of
Conformity (For USA Only)
Responsible Party:
Brother International Corporation
200 Crossing Boulevard
Bridgewater, NJ 08807-0911 USA
TEL: (908) 704-1700
declares, that the products
Product Name: DSmobile DS-640, DSmobile DS-740D,
DSmobile DS-940DW
complies with Part 15 of the FCC Rules. Operation is
subject to the following two conditions: (1) This device
may not cause harmful interference, and (2) this device
must accept any interference received, including
interference that may cause undesired operation.
This equipment has been tested and found to comply with
the limits for a Class B digital device, pursuant to Part 15
of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in
a residential installation. This equipment generates,
uses, and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions,
may cause harmful interference to radio communications.
However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception,
which can be determined by turning the equipment
off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
„„ Reorient or relocate the receiving antenna.
„„ Increase the separation between the equipment
and receiver.
„„ Connect the equipment into an outlet on a
circuit different from that to which the receiver
is connected.
„„ Consult the dealer or an experienced radio/TV
technician for help.
(DSmobile DS-940DW only)
„„ This transmitter must not be co-located or
operated in conjunction with any other antenna
or transmitter.
IMPORTANT
• Changes or modifications not expressly
approved by Brother Industries, Ltd. could void
the user’s authority to operate the equipment.
• A specific shielded interface cable should be
used to ensure compliance with the limits for a
Class B digital device.
Product Safety Guide
Industry Canada
Compliance Statement
(Canada only)
This device complies with Industry Canada's licence-exempt
RSSs. Operation is subject to the following two conditions:
(1) this device may not cause interference, and (2) this
device must accept any interference, including interference
that may cause undesired operation of the device.
Le present appareil est conforme aux CNR d’Industrie
Canada applicables aux appareils radio exempts de
licence. L’exploitation est autorisee aux deux conditions
suivantes : (1) l’appareil ne doit pas produire de
brouillage, et (2) l’utilisateur de l’appareil doit accepter
tout brouillage radioelectrique subi, meme si le brouillage
est susceptible d’en compromettre le fonctionnement.
For use in the USA or
Canada only
Avis d’exposition aux
RF (États-Unis/Canada
uniquement) (DSmobile
DS-940DW uniquement)
Cet équipement est conforme aux limites d’exposition aux
rayonnements énoncées pour un environnement non contrôlé
et respecte les lignes directrices d'exposition aux fréquences
radioélectriques (RF) de la FCC et les règles d’exposition
aux fréquences radioélectriques (RF) CNR-102 de l’IC. Cet
équipement doit être installé et utilisé en gardant une distance
de 20 cm ou plus entre le radiateur et le corps humain.
Trademarks
BROTHER is either a trademark or a registered
trademark of Brother Industries, Ltd.
These machines are made for use in the USA and Canada
only. We cannot recommend using them overseas because the
power requirements of your machine may not be compatible with
the power available in foreign countries. Using USA or Canada
models overseas is at your own risk and may void your warranty.
International ENERGY
STAR® Qualification
Statement
Android and Google Play are trademarks of Google
LLC.
Apple, App Store and Mac are trademarks of Apple
Inc., registered in the U.S. and other countries.
Wi-Fi is a registered trademark of Wi-Fi Alliance®.
Each company whose software title is mentioned
in this manual has a Software License Agreement
specific to its proprietary programs.
The purpose of the International ENERGY STAR
Program is to promote the development and
popularization of energy-efficient equipment.
As an ENERGY STAR® Partner, Brother Industries, Ltd.
has determined that this product meets the ENERGY
STAR® specifications for energy efficiency.
®
Any trade names and product names of companies
appearing on Brother products, related documents
and any other materials are all trademarks
or registered trademarks of those respective
companies.
Copyright and License
© 2019 Brother Industries, Ltd. All rights reserved.
Open Source Licensing
Remarks
RF Exposure Notice (USA
/Canada only) (DSmobile
DS-940DW only)
This product includes open-source software.
Please visit support.brother.com to see the open
source licensing remarks.
This equipment complies with FCC/IC radiation exposure
limits set forth for an uncontrolled environment and meets
the FCC radio frequency (RF) Exposure Guidelines and
RSS-102 of the IC radio frequency (RF) Exposure rules.
This equipment should be installed and operated keeping
the radiator at least 20 cm or more away from person’s body.
9
www.brotherearth.com

* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project