Universal Furniture 414-280 Instruction Sheet

Universal Furniture 414-280 is a poster bed designed with good, affordable, and smart features. It's easy to assemble, with the help of another person to prevent damage to parts and for safety. The bed is made of sturdy materials and features a headboard, footboard, side rails, support legs, and finials. It's designed to be durable and can withstand everyday use. The bed also comes with a hardware pack that includes nuts, spring washers, curved washers, bolts, and a wrench for easy assembly.

PDF

Document

GOOD, AFFORDABLE, SMART DESIGN.

INSTRUCTION SHEET

414-280/28F/28R

414-290/29F/29R

Poster Bed 5/0 6/6

Thank you for purchasing this quality product. Be sure to check all packing material carefully for small parts that may have come loose inside the carton during shipment.

Caution: (1) These parts are cumbersome and heavy. This product can best be assembled with the assistance of one or more persons in order to prevent personal injury and to insure parts are not damaged during the assembly process. If dirty, clean finished parts with mild dishwashing liquid and water solution applied on damp cloth. Cloth should not be excessively wet. Polish finish with soft cloth and an industry recognized furniture polish.

(2) To prevent damage to your floor or carpet, please check the bottom of each piece of furniture for stain residue and rough surfaces and also check for staples or nails left after removing the packaging material.

The manufacturer will not be held responsible if preventative steps are not taken prior to installation.

(3) Unpack and dispose of all packing material but be careful not to throw away any assembly parts or hardware. Read the instruction sheet and parts list carefully. Remove all staples and screws used for packaging carefully using pliers and or screwdrivers to prevent injury and scratching or damaging flooring.

(4) During normal use everyday, screws, bolts, nuts and wooden plugs may loosen up. They should be periodically inspected and re-tightened to prevent damage to the furniture and (or) personal property or cause injury. Always check to be sure all hardware on this list and the above mentioned components is attached to the furniture properly and kept tightened at all times.

PARTS LIST:

# Description

A Headboard

C Bed Foot

E Slat

G Lower Post

I Finial

Qty. # Description

1pc B Footboard

2pcs D Side rail

3pcs F Support leg

2pcs H Center Post

4pcs J Upper Post

Qty.

2pcs

3pcs

4pcs

K Mushroom cap 2pcs L Hardware Pack

Assembly Procedure : (Please follow the sketches below.)

1bag

Step 1: Unpack, inspect, and read assembly instruction carefully. Lay out the parts and hardware.

Make sure the quantity of each is correct.

Step 2: Put the footboard (B) upright down on a soft and smooth surface to avoid damage or being scratched. Then attach the bed feet (C) to footboard (B) by hand.

Step 3: Attach the side rails (D) to the headboard (A) and footboard (C) with nut (1), spring washer

(2), curved washer (3) and bolts (4) using wrench (5). And attach the support leg (F) to the

Slat (E) by hand. Then screw the slats (E) to the side rails (D) using screwdriver (not provided).

Step 4: Attach the posts (G&H&J) and finial (I) to the top of headboard (A) and footboard (B). And also you can use mushroom cap (K) for footboard (C) as below shown.

Note: 1. 414-290/29F/29R has 6 pieces support legs.

There are several options for the posts assembled. You can freely change it according to your habit.

Assembly is now complete.

GOOD, AFFORDABLE, SMART DESIGN.

INSTRUCTION SHEET

414-280/28F/28R

414-290/29F/29R

Poster Bed 5/0 6/6

HARDWARE LIST(L)

NUT

5/16"

SPRING WASHER

5/16"

3 CURVED WASHER

4 BOLT

5/16"L32*13*8mm

5/16"*3"

5 WRENCH

87*19*2.5mmT

6 WOOD SCREW

#8*1-1/4"

Q'TY

8 PCS

1 PC

6 PCS

Step 2

1 5

Step 3

GOOD, AFFORDABLE, SMART DESIGN.

INSTRUCTION SHEET

414-280/28F/28R

414-290/29F/29R

Poster Bed 5/0 6/6

Step 4

Hello! I am an AI chatbot specifically trained to assist you with the Universal Furniture 414-280 Instructions. I have thoroughly reviewed the document and can help you locate the exact information you need or explain the content in clear and simple terms. Whether you’re looking for guidance on specific features, troubleshooting steps, or general usage, feel free to ask your questions. The more details you provide about your concerns or needs, the more accurately and effectively I can assist you!