Target Windham Accent cabinet WNCBSHBK Assembly Instructions Manual 19 Pages

Target Windham Accent cabinet WNCBSHBK: With its stylish and functional design, this piece is a great addition to any home. The cabinet features adjustable shelves, making it easy to customize the storage space to fit your needs. It also includes an anti-tip kit for added safety. The Windham Accent Cabinet is the perfect solution for organizing your belongings.

This includes all the features mentioned in the instruction manual.

advertisement

Ask Al about Target Windham Accent cabinet WNCBSHBK Assembly Instructions Manual

Chatbot has read manual and is ready to answer your questions.

Manual
Target Windham Accent cabinet WNCBSHBK Assembly Instructions Manual | Manualzz

windham

accent cabinet style # WNCBSHGY (grey) dpci # 249-16-0012 tcin # 14646619 style # WNCBSHRD (red) dpci # 249-16-0014 tcin # 14646618 style # WNCBSHBK (black) dpci # 249-16-0015 tcin # 14646617 style # WNCBSHBL (teal) dpci # 249-16-0024 tcin # 14646616 style # WNCBSHWH (shell) dpci # 249-16-0025 tcin # 14646615 style # WNCBSH2DOV (overcast) dpci # 249-16-4303 tcin # 50077424

>> assembly instructions

© 2019 Target. The Bullseye Design is a trademark of Target Brands, Inc. All rights reserved.

2

Congratulations on your latest Target purchase.

Now what? Don’t start sweating over this box of parts. This will be easy. We did the hard work for you.

All you need to do is follow our simple instructions and you’ll be on your way to transforming your room in no time. Good luck—though we’re confident you won’t need it.

before you begin

1. Check for damaged or missing parts. Call 1-855-MYTGTHOME (855-698-4846) to order missing supplies.

2. Use the carton as a working surface to prevent product damage during assembly.

3. Read through and review assembly steps.

4. Gather all tools prior to assembly.

tools needed

table of contents

introduction

hardware

parts list

how to use the cam lock system

assembly

how to adjust door alignment

7-16

17

5

6

2

4

QUESTIONS? Just call 1-855-MYTGTHOME (855-698-4846) for parts and service. For faster service, have the style number and dpci number ready when calling. 3

hardware

(H1) x 16 wooden dowel

(H2) x12 cam bolt

(H3) x 12 cam

(H4) x 27 short pan-head screw

(H5) x 8 short flat-head screw

(H6) x 16 shelf support

(H7) x 2 knob

(H8) x 2 knob bolt

(H9) x 2 magnet

(H10) x 4 allen head bolt

(H11) x 4 lock washer

(H12) x 6 washer

4

(H13) x 1 allen wrench

(H14) x 1 long pan-head screw

(H15) x 1 wall strap

(H16) x 1 wall anchor

(H17) x 1 wall screw

exploded diagram

8

9

6

7

10

ITEM DESCRIPTION QUANTITY

1 top panel 1

2

3

4 left side frame right side frame bottom panel

1

1

1

5 partition panel 2 back panel left door right door side adjustable shelf center adjustable shelf

1

2

1

1

2

5

how to use the cam lock system

Screw cam bolt into panel Align cam bolt(s) with cam(s) and insert all the way into cross-bored hole(s)

Push cam into panel - arrow feature on cam top points to panel edge

6

Rotate cam(s) clockwise 180° to lock panels together

Panels should be tight against each other and connection should be rigid

step 1: attach partition panels to bottom panel

finished edge position cams outside

(H1) x 4 wooden dowel

(H2) x 4 cam bolt

(H3) x 4 cam

1.1. Carefully tap small wooden dowels into place. Leave 12mm of the dowels sticking out.

1.2. Screw-In cam bolts must be screwed down flush.

1.3. Refer to page 6 for instructions on how to use the cam lock system.

finished edge position cams outside

7

step 2: attach right side frame

(H1) x 2 wooden dowel

(H2) x 2 cam bolt

(H3) x 2 cam

8

2.1. Carefully tap small wooden dowels into place. Leave 12mm of the dowels sticking out.

2.2. Screw-In cam bolts must be screwed down flush.

2.3. Refer to page 6 for instructions on how to use the cam lock system.

step 3: attach left side frame

(H1) x 2 wooden dowel

(H2) x 2 cam bolt

(H3) x 2 cam

3.1. Carefully tap small wooden dowels into place. Leave 12mm of the dowels sticking out.

3.2. Screw-In cam bolts must be screwed down flush.

3.3. Refer to page 6 for instructions on how to use the cam lock system.

9

step 4: prepare top panel

(H2) x 4 cam bolt

(H9) x 2 magnet

(H4) x 4 short pan head screw

10

4.1. Screw-In cam bolts must be screwed down flush.

4.2. Do not over tighten screws.

step 5: attach top panel

(H1) x 8 wooden dowel

(H3) x 4 cam

(H13) x 1 allen wrench

(H10) x 4 allen head bolt

(H11) x 4 lock washer

(H12) x 4 washer

5.1. Carefully tap small wooden dowels into place. Leave 12mm of the dowels sticking out.

5.2. Align bolts with pre-drilled holes.

5.3. Do not over tighten bolts

11

step 6: attach back panel

**FAILURE TO FOLLOW ALL DIRECTIONS ON THIS PAGE MAY RESULT IN UNEVEN DOOR ALIGNMENT** hole for anti-tip kit

Begin by installing all of the screws along one edge of the back panel. Next, using a square or tape measure, make sure that the cabinet is square. (If using a tape measure, the distance from one corner, diagonally to the other corner should be the same in both directions.) If not, apply gentle pressure to the diagonally opposite corners to shift case into alignment. Re-measure to ensure equal distances. Install the remaining screws, starting with the corners.

(H4) x 23 short pan head screw

12

6.1. Make sure the screws go through the pre-drilled holes properly.

6.2. Do not over tighten screws.

step 7: attach knobs to left and right doors

(H7) x 2 knob

(H8) x 2 knob bolt

7.1. Do not over tighten bolts.

13

step 8: attach doors

14

(H5) x 8 short flat head screw

step 9: install side and center adjustable shelves

(H6) x 16 shelf support

9.1. Insert shelf supports into desired hole.

Different holes accommodate different shelf heights.

9.2. Angle shelf to fit between vertical panels and set on top of shelf supports.

15

step 10: install anti-tip kit

(H12)

(H15)

(H14)

Position against wall

Mark position of strap hole on wall

Drill 7mm hole

Tap in wall anchor

(H16)

16

(H14) x 1

19mm pan head screw

(H15) x 1 wall strap

(H16) x 1 wall anchor

(H17 ) x 1 wall screw

(H12) x 2 washer

Fasten anti-tip strap with wall screw provided

(H17)

how to adjust door alignment

Tips for proper door alignment:

-Adjustable levelers will reduce minor door mis-alignments

caused by an uneven floor.

-Use a level to determine if the cabinet top is level. If not, start

with the levelers retracted and adjust them as needed.To

retract the levelers turn them counterclockwise. To extend

the levelers turn them clockwise.

-If door mis-alignment persists, refer back to page 10

for additional information. If the cabinet is not square you will

need to repeat this step.

adjustable leg levelers

17

WARNING

Serious or fatal crushing injuries can occur from furniture tip-over. To help prevent tip-over:

• Install tip-over restraint provided.

• Place heaviest items in the lowest drawers.

• Do not set TV's or other heavy objects on top of this product, unless the product is specifically designed to accommodate them.

• Never allow children to climb or hang on drawers, doors, or shelves.

• Never open more than one drawer at a time.

(OR)

• Do not defeat or remove the drawer interlock system.

Use of tip-over restraints may only reduce, but not eliminate, the risk of tip-over.

This is a permanent label. Do not remove.

75 lbs.

center shelf weight limit is 25 lbs.

18

1. This unit has been designed for the weight shown. Exceeding this recommended weight could result in

excessive “sagging” of the top. Extreme overloading can cause failure of the top and possible injury.

2. Furniture Care Instructions: Dust with a clean, lint-free cloth. Use a spray furniture polish as needed.

QUESTIONS? Just call 1-855-MYTGTHOME (855-698-4846) for parts and service. For faster service, have the style number and DPCI number ready when calling.

© 2019 Target. The Bullseye Design is a trademark of Target Brands, Inc. All rights reserved.

advertisement

Related manuals

Download PDF

advertisement