Asus ProArt StudioBook Pro X W730 Laptop User Manual
advertisement
Assistant Bot
Need help? Our chatbot has already read the manual and is ready to assist you. Feel free to ask any questions about the device, but providing details will make the conversation more productive.
E16331
Revised Edition V2 / January 2020
E-Manual
COPYRIGHT INFORMATION
No part of this manual, including the products and software described in it, may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language in any form or by any means, except documentation kept by the purchaser for backup purposes, without the express written permission of ASUSTeK COMPUTER INC. (“ASUS”).
ASUS PROVIDES THIS MANUAL “AS IS” WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS OR IMPLIED,
INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OR CONDITIONS OF MERCHANTABILITY OR
FITNESS FOR A PARTICULAR PURPOSE. IN NO EVENT SHALL ASUS, ITS DIRECTORS, OFFICERS, EMPLOYEES
OR AGENTS BE LIABLE FOR ANY INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES
(INCLUDING DAMAGES FOR LOSS OF PROFITS, LOSS OF BUSINESS, LOSS OF USE OR DATA, INTERRUPTION
OF BUSINESS AND THE LIKE), EVEN IF ASUS HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES
ARISING FROM ANY DEFECT OR ERROR IN THIS MANUAL OR PRODUCT.
Products and corporate names appearing in this manual may or may not be registered trademarks or copyrights of their respective companies, and are used only for identification or explanation and to the owners’ benefit, without intent to infringe.
SPECIFICATIONS AND INFORMATION CONTAINED IN THIS MANUAL ARE FURNISHED FOR INFORMATIONAL
USE ONLY, AND ARE SUBJECT TO CHANGE AT ANY TIME WITHOUT NOTICE, AND SHOULD NOT BE
CONSTRUED AS A COMMITMENT BY ASUS. ASUS ASSUMES NO RESPONSIBILITY OR LIABILITY FOR ANY
ERRORS OR INACCURACIES THAT MAY APPEAR IN THIS MANUAL, INCLUDING THE PRODUCTS AND
SOFTWARE DESCRIBED IN IT.
Copyright © 2020 ASUSTeK COMPUTER INC. All Rights Reserved.
LIMITATION OF LIABILITY
Circumstances may arise where because of a default on ASUS’ part or other liability, you are entitled to recover damages from ASUS. In each such instance, regardless of the basis on which you are entitled to claim damages from ASUS, ASUS is liable for no more than damages for bodily injury (including death) and damage to real property and tangible personal property; or any other actual and direct damages resulted from omission or failure of performing legal duties under this Warranty Statement, up to the listed contract price of each product.
ASUS will only be responsible for or indemnify you for loss, damages or claims based in contract, tort or infringement under this Warranty Statement.
This limit also applies to ASUS’ suppliers and its reseller. It is the maximum for which ASUS, its suppliers, and your reseller are collectively responsible.
UNDER NO CIRCUMSTANCES IS ASUS LIABLE FOR ANY OF THE FOLLOWING: (1) THIRD-PARTY CLAIMS
AGAINST YOU FOR DAMAGES; (2) LOSS OF, OR DAMAGE TO, YOUR RECORDS OR DATA; OR (3) SPECIAL,
INCIDENTAL, OR INDIRECT DAMAGES OR FOR ANY ECONOMIC CONSEQUENTIAL DAMAGES (INCLUDING
LOST PROFITS OR SAVINGS), EVEN IF ASUS, ITS SUPPLIERS OR YOUR RESELLER IS INFORMED OF THEIR
POSSIBILITY.
SERVICE AND SUPPORT
Visit our multi-language website at https://www.asus.com/support/
2 Notebook PC E-Manual
Table of Contents
Chapter 1: Hardware Setup
Chapter 2: Using your Notebook PC
Notebook PC E-Manual 3
4
Chapter 3: Working with Windows® 10
Chapter 4: Power-On Self-Test (POST)
Using POST to access BIOS and Troubleshoot......................................................64
Notebook PC E-Manual
Chapter 5: RAID Configuration
Tips and FAQs
Appendices
Federal Communications Commission Interference Statement ...................93
FCC Radio Frequency (RF) Exposure Caution Statement .................................94
Compliance Statement of Innovation, Science and
Déclaration de conformité de Innovation, Sciences et
Développement économique Canada (ISED) ......................................................96
Déclaration relative à l’exposition aux radiations ...............................................97
Notebook PC E-Manual 5
Nordic Lithium Cautions (for lithium-ion batteries) ...........................................100
CTR 21 Approval (for Notebook PC with built-in Modem) ..............................101
Declaration of Compliance for Product Environmental Regulation.............103
Rechargeable Battery Recycling Service in North America.............................104
6 Notebook PC E-Manual
About this manual
This manual provides information about the hardware and software features of your Notebook PC, organized through the following chapters:
Chapter 1: Hardware Setup
This chapter details the hardware components of your Notebook
PC.
Chapter 2: Using your Notebook PC
This chapter shows you how to use the different parts of your
Notebook PC.
Chapter 3: Working with Windows® 10
This chapter provides an overview of using Windows® 10 in your
Notebook PC.
Chapter 4: Power-On Self-Test (POST)
This chapter shows you how to use POST to change the settings of your Notebook PC.
Notebook PC E-Manual 7
Chapter 5: RAID Configuration
This chapter describes the RAID configurations.
Tips and FAQs
This section presents some recommended tips, hardware FAQs, and software FAQs you can refer to for maintaining and fixing common issues with your Notebook PC.
Appendices
This section includes notices and safety statements for your
Notebook PC.
8 Notebook PC E-Manual
Conventions used in this manual
To highlight key information in this manual, some text are presented as follows:
IMPORTANT!
This message contains vital information that must be followed to complete a task.
NOTE: This message contains additional information and tips that can help complete tasks.
WARNING!
This message contains important information that must be followed to keep you safe while performing tasks and prevent damage to your Notebook PC's data and components.
Icons
The icons below indicate the devices you can use for completing a series of tasks or procedures on your Notebook PC.
= Use the touchpad.
= Use the keyboard.
Typography
Bold = This indicates a menu or an item that must be selected.
Italic = This indicates sections that you can refer to in this manual.
Notebook PC E-Manual 9
Safety precautions
Using your Notebook PC
This Notebook PC should only be used in environments with ambient temperatures between
5°C (41°F) and 35°C (95°F).
Refer to the rating label on the bottom of your
Notebook PC and ensure that your power adapter complies with this rating.
Your Notebook PC can get warm to hot while in use or while charging the battery pack. Do not leave your Notebook PC on your lap or near any part of your body to prevent injury from heat. When working on your Notebook PC, do not place it on surfaces that can block the vents.
Do not use damaged power cords, accessories, and other peripherals with your Notebook PC.
10
While powered on, ensure that you do not carry or cover your Notebook PC with any materials that can reduce air circulation.
Do not place your Notebook PC on uneven or unstable work surfaces.
You can send your Notebook PC through x-ray machines (used on items placed on conveyor belts), but do not expose them to magnetic detectors and wands.
Contact your airline provider to learn about related in-flight services that can be used and restrictions that must be followed when using your Notebook
PC in-flight.
Notebook PC E-Manual
Caring for your Notebook PC
Disconnect the AC power and remove the battery pack (if applicable) before cleaning your Notebook
PC. Use a clean cellulose sponge or chamois cloth dampened with a solution of nonabrasive detergent and a few drops of warm water. Remove any extra moisture from your Notebook PC using a dry cloth.
Do not use strong solvents such as thinners, benzene, or other chemicals on or near your
Notebook PC.
Do not place objects on top of your Notebook PC.
Do not expose your Notebook PC to strong magnetic or electrical fields.
Do not use or expose your Notebook PC near liquids, rain, or moisture.
Do not expose your Notebook PC to dusty environments.
Do not use your Notebook PC near gas leaks.
Notebook PC E-Manual 11
Proper disposal
Do not throw your Notebook PC in municipal waste.
This product has been designed to enable proper reuse of parts and recycling. The symbol of the crossed out wheeled bin indicates that the product
(electrical, electronic equipment and mercurycontaining button cell battery) should not be placed in municipal waste. Check local regulations for disposal of electronic products.
Do not throw the battery in municipal waste. The symbol of the crossed out wheeled bin indicates that the battery should not be placed in municipal waste.
12 Notebook PC E-Manual
Chapter 1:
Hardware Setup
Notebook PC E-Manual 13
Getting to know your Notebook PC
Top View
NOTE: The keyboard's layout may vary per region or country. The
Notebook view may also vary in appearance depending on the Notebook
PC model.
14 Notebook PC E-Manual
Array microphones
The array microphones feature echo canceling, noise suppression, and beam forming functions for better voice recognition and audio recording.
Camera
The built-in camera allows you to take pictures or record videos using your Notebook PC.
Camera indicator
The camera indicator lights up when the built-in camera is in use.
Display panel
This high-definition display panel provides excellent viewing features for photos, videos, and other multimedia files on your
Notebook PC.
Air vents
The air vents allow cool air to enter and warm air to exit the
Notebook PC.
WARNING!
Ensure that paper, books, clothing, cables, or other objects do not block any of the air vents or else overheating may occur.
Notebook PC E-Manual 15
16
Microphone indicator
This indicator lights up when the microphone is turned off.
Keyboard
The keyboard provides full-sized QWERTY keys with a comfortable travel depth for typing. It also enables you to use the function keys, allows quick access to Windows®, and controls other multimedia functions.
NOTE: The keyboard layout differs by model or territory.
Capital lock indicator
This indicator lights up when the capital lock function is activated. Using capital lock allows you to type capitalized letters
(such as A, B, C) using your Notebook PC’s keyboard.
Function key lock indicator
This indicator lights up when the function keys feature is activated.
NOTE: For more details, refer to the Using the keyboard section in this manual.
Notebook PC E-Manual
Touchpad
The touchpad allows the use of multi-gestures to navigate onscreen, providing an intuitive user experience. It also simulates the functions of a regular mouse.
NOTE: For more details, refer to the Using the touchpad section in this manual.
Screenpad (on selected models)
The screenpad allows you to toggle another screen for the touchpad, providing more adaptive controls.
NOTE: For more details, refer to the Using the keyboard section in this manual.
Notebook PC E-Manual 17
18
Power indicator
The power indicator lights up when the Notebook PC is turned on and blinks slowly when the Notebook PC is in sleep mode.
Power button
Press the power button to turn your Notebook PC on or off. You can also use the power button to put your Notebook PC to sleep or hibernate mode and wake it up from sleep or hibernate mode.
In the event that your Notebook PC becomes unresponsive, press and hold the power button for at least four (4) seconds until your Notebook PC shuts down.
Numeric keypad
The numeric keypad toggles between these two functions: for numeric input and as pointer direction keys.
NOTE: For more details, refer to the Using the numeric keypad section in this manual.
Fingerprint sensor
This built-in fingerprint sensor captures your fingerprint and uses it as biometric authentication for logging on to your Notebook
PC’s system.
Notebook PC E-Manual
Bottom View
NOTE: The bottom view may vary in appearance depending on model.
WARNING!
Your Notebook PC can get warm to hot while in use or while charging the battery pack. Do not leave your Notebook PC on your lap or near any part of your body to prevent injury from heat. When working on your Notebook PC, do not place it on surfaces that can block the vents.
IMPORTANT!
• Battery time varies by usage and by the specifications for this
Notebook PC. The battery pack cannot be disassembled.
• Purchase components from authorized retailers to ensure maximum compatibility and reliability. Consult an ASUS service center or authorized retailers for product service or assistance on proper disassembly or assembly of the product.
Notebook PC E-Manual 19
Air vents
The air vents allow cool air to enter and warm air to exit the
Notebook PC.
WARNING!
Ensure that paper, books, clothing, cables, or other objects do not block any of the air vents or else overheating may occur.
Audio speakers
The built-in audio speakers allow you to hear audio straight from your Notebook PC. Audio features are software-controlled.
20 Notebook PC E-Manual
Right View
Audio speakers
The built-in audio speakers allow you to hear audio straight from your Notebook PC. Audio features are software-controlled.
USB 3.2 Gen 2 Type-C®/Thunderbolt 3 combo port
The USB 3.2 (Universal Serial Bus 3.2) Gen 2 Type-C® port provides a transfer rate of up to 40 Gbit/s and is backward compatible to USB 2.0. Use a Thunderbolt 3 adapter to connect your Notebook PC to a DisplayPort, VGA, DVI, or HDMI external display and experience high-resolution display features via Intel®
Thunderbolt™ technology.
NOTE: Transfer rate of this port may vary per model.
Notebook PC E-Manual 21
USB 3.2 Gen 2 port
The USB 3.2 (Universal Serial Bus 3.2) Gen 2 port provides a transfer rate of up to 10 Gbit/s and is backward compatible to
USB 2.0.
LAN port
Insert the network cable into this port to connect to a local area network.
Kensington® security slot
The Kensington® security slot allows you to secure your
Notebook PC using Kensington® compatible Notebook PC security products.
22 Notebook PC E-Manual
Left View
Power (DC) input port
Insert the bundled power adapter into this port to charge the battery pack and supply power to your Notebook PC.
WARNING!
The adapter may become warm to hot while in use.
Do not cover the adapter and keep it away from your body while it is connected to a power source.
IMPORTANT!
Use only the bundled power adapter to charge the battery pack and supply power to your Notebook PC.
Notebook PC E-Manual 23
24
HDMI port
This port is for the HDMI (High-Definition Multimedia Interface) connector and is HDCP compliant for HD DVD, Blu-ray, and other protected content playback.
USB 3.2 Gen 2 port
The USB 3.2 (Universal Serial Bus 3.2) Gen 2 port provides a transfer rate of up to 10 Gbit/s and is backward compatible to
USB 2.0.
Headphone/Headset/Microphone jack
This port allows you to connect amplified speakers or headphones. You can also use this port to connect your headset or an external microphone.
Memory card reader
This built-in memory card reader supports SD card formats.
Audio speakers
The built-in audio speakers allow you to hear audio straight from your Notebook PC. Audio features are software-controlled.
Notebook PC E-Manual
Front View
Status indicators
The status indicators help identify the current hardware status of your Notebook PC.
Power indicator
The power indicator lights up when the Notebook PC is turned on and blinks slowly when the Notebook
PC is in sleep mode.
Notebook PC E-Manual 25
26
Two-color battery charge indicator
The two-color LED provides a visual indication of the battery’s charge status. Refer to the following table for details:
Color
Solid White
Status
The Notebook PC is plugged to a power source and the battery power is between 95% and
100%.
Solid Orange The Notebook PC is plugged to a power source, charging its battery, and the battery power is less than 95%.
Blinking Orange The Notebook PC is running on battery mode and the battery power is less than 10%.
Lights off The Notebook PC is running on battery mode and the battery power is between 10% to 100%.
Drive activity indicator
This indicator lights up when your Notebook PC is accessing the internal storage drives.
Notebook PC E-Manual
Chapter 2:
Using your Notebook PC
Notebook PC E-Manual 27
Getting started
Charge your Notebook PC
A. Connect the AC power cord to the AC/DC adapter.
B. Connect the DC power connector into your Notebook PC’s power
(DC) input port.
C. Plug the AC power adapter into a 100V~240V power source.
Charge the Notebook PC for 3 hours before using it in battery mode for the first time.
NOTE: The power adapter may vary in appearance, depending on models and your region.
28
IMPORTANT!
Power adapter information:
• Input voltage: 100-240Vac
• Input frequency: 50-60Hz
• Rating output current: 14A (280W)
• Rating output voltage: 20V
Notebook PC E-Manual
IMPORTANT!
• Locate the input/output rating label on your Notebook PC and ensure that it matches the input/output rating information on your power adapter. Some Notebook PC models may have multiple rating output currents based on the available SKU.
• Ensure that your Notebook PC is connected to the power adapter before turning it on for the first time. We strongly recommend that you use a grounded wall socket while using your Notebook PC on power adapter mode.
• The socket outlet must be easily accessible and near your Notebook
PC.
• To disconnect your Notebook PC from its main power supply, unplug your Notebook PC from the power socket.
WARNING!
Read the following precautions for your Notebook PC’s battery:
• Only ASUS-authorized technicians should remove the battery inside the device (for non-removable battery only).
• The battery used in this device may present a risk of fire or chemical burn if removed or disassembled.
• Follow the warning labels for your personal safety.
• Risk of explosion if battery is replaced by an incorrect type.
• Do not dispose of in fire.
• Never attempt to short-circuit your Notebook PC’s battery.
• Never attempt to disassemble and reassemble the battery
(for non-removable battery only).
• Discontinue usage if leakage is found.
• The battery and its components must be recycled or disposed of properly.
• Keep the battery and other small components away from children.
Notebook PC E-Manual 29
Lift to open the display panel
Press the power button
30 Notebook PC E-Manual
Using the touchpad
Moving the pointer
You can tap anywhere on the touchpad to activate its pointer, then slide your finger on the touchpad to move the pointer onscreen.
Slide horizontally
Slide vertically
Slide diagonally
Notebook PC E-Manual 31
One-finger gestures
Tap/Double-tap
•
•
Tap an app to select it.
Double-tap an app to launch it.
Drag and drop
Double-tap an item, then slide the same finger without lifting it off the touchpad. To drop the item to its new location, lift your finger from the touchpad.
32 Notebook PC E-Manual
Left-click Right-click
•
•
Click an app to select it.
Double-click an app to launch it.
Click this button to open the rightclick menu.
NOTE: The areas inside the dotted line represent the locations of the left mouse button and the right mouse button on the touchpad.
Two-finger gestures
Tap
Tap two fingers on the touchpad to simulate the right-click function.
Notebook PC E-Manual 33
Two-finger scroll (up/down) Two-finger scroll (left/right)
Slide two fingers to scroll up or down.
Slide two fingers to scroll left or right.
Zoom out Zoom in
Bring together your two fingers on the touchpad.
Spread apart your two fingers on the touchpad.
34 Notebook PC E-Manual
Drag and drop
Select an item then press and hold the left button. Using your other finger, slide on the touchpad to drag the item, lift your finger off the button to drop the item.
Three-finger gestures
Tap
Tap three fingers on the touchpad to invoke Cortana.
Notebook PC E-Manual 35
Swipe left/Swipe right
If you opened multiple apps, swipe three fingers left or right to switch between these apps.
Swipe up Swipe down
Swipe up to see an overview of all the apps currently opened.
Swipe down to show the desktop.
36 Notebook PC E-Manual
Four-finger gestures
Tap
Tap four fingers on the touchpad to invoke Action Center.
Customizing your touchpad
1. Launch All settings from the Action Center.
2. Select , then select Mouse & touchpad .
3. Adjust the settings to your preference.
Notebook PC E-Manual 37
Using the keyboard
HotKeys
The HotKeys on your Notebook PC’s keyboard can trigger the following commands:
Turns the speaker on or off
Turns the speaker volume down
Turns the speaker volume up
Decreases display brightness
Increases display brightness
Enables or disables the touchpad/screenpad*
Adjusts brightness for the backlit keyboard
Toggles the display mode
NOTE: Ensure that the second display is connected to your Notebook PC.
* On selected models
38 Notebook PC E-Manual
Activates the Lock screen
Turns the microphone on or off
Turns the camera on or off
Activates screen capture tool
Function keys
Press to enable or disable the function keys feature.
When the function keys feature is enabled, you can also access HotKeys by holding down in combination with the top row keys.
Windows® 10 keys
There are two special Windows® keys on your Notebook PC’s keyboard used as below:
Launches the Start menu
Displays the drop-down menu*
* On selected models
Notebook PC E-Manual 39
Using the numeric keypad
NOTE: The numeric keypad layout may differ by model or territory but the usage procedures remain the same.
A numeric keypad is available on selected Notebook PC models. You can use this keypad for numeric input or as pointer direction keys.
Press to toggle between using the keypad as number keys or as pointer direction keys.
40 Notebook PC E-Manual
Chapter 3:
Working with Windows® 10
Notebook PC E-Manual 41
Starting for the first time
When you start your Notebook PC for the first time, a series of screens appear to guide you in configuring your Windows® 10 operating system.
To start your Notebook PC for the first time:
1. Press the power button on your Notebook PC. Wait for a few minutes until the setup screen appears.
2. From the setup screen, pick your region and a language to use on your Notebook PC.
3. Carefully read the License Terms. Select I accept .
4. Follow the onscreen instructions to configure the following basic items:
• Personalize
• Get online
• Settings
• Your account
5. After configuring the basic items, Windows® 10 proceeds to install your apps and preferred settings. Ensure that your Notebook PC is kept powered on during the setup process.
6. Once the setup process is complete, the Desktop appears.
NOTE: The screenshots in this chapter are for reference only.
42 Notebook PC E-Manual
Start menu
The Start menu is the main gateway to your Notebook PC’s programs,
Windows® apps, folders, and settings.
Change account settings, lock, or sign out from your account
Launch an app from the Start screen
•
•
•
•
•
•
Launch Taskview
Launch Search
Launch the Start menu
Launch an app from the taskbar
Launch All apps
Shut down, restart, or put your Notebook PC to sleep
Launch Settings
Launch File Explorer
You can use the Start menu to do these common activities:
Start programs or Windows® apps
Open commonly used programs or Windows® apps
Adjust Notebook PC settings
Get help with the Windows operating system
Turn off your Notebook PC
Log off from Windows or switch to a different user account
Notebook PC E-Manual 43
Launching the Start menu
Position your mouse pointer over the Start button in the lower-left corner of your desktop then click it.
Press the Windows logo key on your keyboard.
Opening programs from the Start menu
One of the most common uses of the Start menu is opening programs installed on your Notebook PC.
Position your mouse pointer over the program then click to launch it.
Use the arrow keys to browse through the programs.
Press to launch it.
NOTE: Select All apps at the bottom of the left pane to display a full list of programs and folders on your Notebook PC in alphabetical order.
44 Notebook PC E-Manual
Windows ® apps
These are apps pinned on the right pane of the Start menu and displayed in tiled-format for easy access.
NOTE: Some Windows® apps require signing in to your Microsoft account before they are fully launched.
Notebook PC E-Manual 45
Working with Windows® apps
Use your Notebook PC’s touchpad or keyboard to launch, customize, and close apps.
Launching Windows® apps from the Start menu
Position your mouse pointer over the app then click to launch it.
Use the arrow keys to browse through the apps. Press
to launch an app.
Customizing Windows® apps
You can move, resize, unpin, or pin apps to the taskbar from the Start menu using the following steps:
Moving apps
Position your mouse pointer over the app, then drag and drop the app to a new location.
46 Notebook PC E-Manual
Resizing apps
Position your mouse pointer over the app and right-click it, then click Resize and select an app tile size.
Use the arrow keys to navigate to the app.
Press or (on selected models), then select Resize and select an app tile size.
Unpinning apps
Position your mouse pointer over the app and right-click it, then click Unpin from Start .
Use the arrow keys to navigate to the app.
Press or (on selected models), then select Unpin from Start .
Notebook PC E-Manual 47
Pinning apps to the taskbar
Position your mouse pointer over the app and right-click it, then click Pin to taskbar .
Use the arrow keys to navigate to the app.
Press or (on selected models), then select Pin to taskbar .
Pinning more apps to the Start menu
From All apps , position your mouse pointer over the app you want to add to the Start menu and right-click it, then click Pin to Start .
From All apps , press or (on selected models) on the app that you want to add to the Start menu, then select Pin to Start .
48 Notebook PC E-Manual
Task view
Quickly switch between opened apps and programs using the task view feature, you can also use task view to switch between desktops.
Launching task view
Position your mouse pointer over the taskbar and click it.
Press on your keyboard.
icon on the
Notebook PC E-Manual 49
Snap feature
The Snap feature displays apps side-by-side, allowing you to work or switch between apps.
Snap hotspots
You can drag and drop apps to these hotspots to snap them into place.
50 Notebook PC E-Manual
Using Snap
1. Launch the app you wish to snap.
2. Drag the title bar of your app and drop the app to the edge of the screen to snap.
3. Launch another app and repeat the above steps to snap another app.
1. Launch the app you wish to snap.
2. Press and hold the keys to snap the app.
key, then use the arrow
3. Launch another app and repeat the above steps to snap another app.
Notebook PC E-Manual 51
Action Center
Action Center consolidates notifications from apps and presents a single place where you can interact with them. It also has a really useful Quick
Actions section at the bottom.
Launching Action Center
Position your mouse pointer over the icon on the taskbar and click it.
Press on your keyboard.
52 Notebook PC E-Manual
Other keyboard shortcuts
Using the keyboard, you can also use the following shortcuts to help you launch applications and navigate Windows® 10.
Launches Start menu
Launches Action Center
Launches the desktop
Launches the File Explorer
Launches Settings
Launches Connect panel
Activates the Lock screen
Minimizes all currently active windows
Notebook PC E-Manual 53
Launches Search
Launches Project panel
Opens the Run window
Opens Ease of Access Center
Opens the context menu of the Start button
Launches the magnifier icon and zooms in your screen
Zooms out your screen
54 Notebook PC E-Manual
Connecting to wireless networks
Wi-Fi
Access emails, surf the Internet, and share applications via social networking sites using your Notebook PC’s Wi-Fi connection.
IMPORTANT!
Airplane mode disables this feature. Ensure that Airplane mode is turned off before enabling the Wi-Fi connection of your
Notebook PC.
Connecting Wi-Fi
Connect your Notebook PC to a Wi-Fi network by using the following steps:
1. Select the icon from the taskbar.
2. Select the icon to enable Wi-Fi.
3. Select an access point from the list of available Wi-Fi connections.
4. Select to start the network connection.
NOTE: You may be prompted to enter a security key to activate the Wi-Fi connection.
Notebook PC E-Manual 55
Bluetooth
Use Bluetooth to facilitate wireless data transfers with other Bluetoothenabled devices.
IMPORTANT!
Airplane mode disables this feature. Ensure that Airplane mode is turned off before enabling the Bluetooth connection of your
Notebook PC.
Pairing with other Bluetooth-enabled devices
You need to pair your Notebook PC with other Bluetooth-enabled devices to enable data transfers. Connect your devices by using the following steps:
1. Launch from the Start menu.
2. Select , then select Bluetooth to search for
Bluetooth-enabled devices.
3. Select a device from the list. Compare the passcode on your Notebook PC with the passcode sent to your chosen device. If they are the same, select
Yes to successfully pair your Notebook PC with the device.
NOTE: For some Bluetooth-enabled devices, you may be prompted to key in the passcode of your Notebook PC.
56 Notebook PC E-Manual
Airplane mode
Airplane mode disables wireless communication, allowing you to use your Notebook PC safely while in-flight.
NOTE: Contact your airline provider to learn about related in-flight services that can be used and restrictions that must be followed when using your Notebook PC in-flight.
Turning Airplane mode on
1. Launch from the taskbar.
2. Select the icon to enable Airplane mode.
Turning Airplane mode off
1. Launch from the taskbar.
2. Select the icon to disable Airplane mode.
Notebook PC E-Manual 57
Connecting to wired networks
You can also connect to wired networks, such as local area networks and broadband Internet connection, using your Notebook PC’s LAN port.
NOTE: Contact your Internet Service Provider (ISP) for details or your network administrator for assistance in setting up your Internet connection.
To configure your settings, refer to the following procedures.
IMPORTANT!
Ensure that a network cable is connected between your
Notebook PC’s LAN port and a local area network before performing the following actions.
Configuring a dynamic IP/PPPoE network connection
1. Launch .
2. Select .
3. Select .
4. Select your LAN then select Properties .
5. Select then select Properties .
6. Select then select OK .
NOTE: Proceed to the next steps if you are using PPPoE connection.
58 Notebook PC E-Manual
7. Return to the Network and Sharing Center window then select Set up a new connection or network .
8. Select then select Next .
9. Select .
10. Type your User name, Password, and Connection name then select Connect .
11. Select to finish the configuration.
12. Select on the taskbar then select the connection you just created.
13. Type your user name and password then select
Connect to start connecting to the Internet.
Configuring a static IP network connection
1. Repeat steps 1 to 5 under Configuring a dynamic
IP/PPPoE network connection .
2. Select .
3. Type the IP address, Subnet mask and Default gateway from your service provider.
4. If needed, you can also type the preferred DNS server address and alternate DNS server address then select OK .
Notebook PC E-Manual 59
Turning your Notebook PC off
You can turn off your Notebook PC by doing either of the following procedures:
•
•
Launch the Start menu, then select
Shut down to do a normal shutdown.
>
From the log-in screen, select > Shut down .
•
•
Press to launch Shut down
Windows. Select Shut down from the drop-down list then select OK .
If your Notebook PC is unresponsive, press and hold the power button for at least four (4) seconds until your Notebook PC turns off.
60 Notebook PC E-Manual
Putting your Notebook PC to sleep
To put your Notebook PC to Sleep mode:
•
•
Launch the Start menu, then select
Sleep to put your Notebook PC to sleep.
From the log-in screen, select > Sleep .
>
Press to launch Shut down
Windows. Select Sleep from the drop-down list then select OK .
NOTE: You can also put your Notebook PC to Sleep mode by pressing the power button once.
Notebook PC E-Manual 61
62 Notebook PC E-Manual
Chapter 4:
Power-On Self-Test (POST)
Notebook PC E-Manual 63
•
•
The Power-On Self-Test (POST)
The POST (Power-On Self-Test) is a series of software-controlled diagnostic tests that run when you turn on or restart your Notebook PC.
The software that controls the POST is installed as a permanent part of the Notebook PC’s architecture.
Using POST to access BIOS and Troubleshoot
During POST, you can access the BIOS settings or run troubleshooting options using the function keys of your Notebook PC. You may refer to the following information for more details.
BIOS
The BIOS (Basic Input and Output System) stores system hardware settings that are needed for system startup in the Notebook PC.
The default BIOS settings apply to most conditions of your Notebook
PC. Do not change the default BIOS settings except in the following circumstances:
An error message appears onscreen during system bootup and requests you to run the BIOS Setup.
You have installed a new system component that requires further
BIOS settings or updates.
WARNING!
Using inappropriate BIOS settings may result to system instability or boot failure. We strongly recommend that you change the
BIOS settings only with the help of a trained service personnel.
Accessing BIOS
Enter the BIOS settings by using any of the following methods:
64 Notebook PC E-Manual
• Restart your Notebook PC then press during POST.
• Launch the Start menu, and choose Settings > Update & security > Recovery , then select Restart now under Advanced startup. When you enter the Advanced startup screen, select
Troubleshoot > Advanced options > UEFI Firmware Settings >
Restart .
BIOS Settings
NOTE: The BIOS screens in this section are for reference only. The actual screens may differ by model and territory.
EZ Mode
This menu appears when you enter the BIOS setup program and provides you an overview of the basic system information. To access the Advanced Mode for the advanced BIOS settings, select Advanced
Mode (F7) or press .
Notebook PC E-Manual 65
Boot
This menu allows you to set your boot option priorities. You may refer to the following procedures when setting your boot priority.
1. On the Boot screen, select Boot Option #1 .
2. Press and select a device as the Boot Option #1 .
66 Notebook PC E-Manual
Security
This menu allows you to set up the administrator and user password of your Notebook PC. It also allows you to control the access to your
Notebook PC’s hard disk drive, input/output (I/O) interface, and USB interface.
NOTE:
• If you install a User Password , you will be prompted to input this before entering the operating system.
• If you install an Administrator Password , you will be prompted to input this before entering BIOS.
Notebook PC E-Manual 67
To set the password:
1. On the Security screen, select Administrator Password or User
Password .
2. Type in a password then press .
3. Re-type to confirm the password then select OK .
To clear the password:
1. On the Security screen, select Administrator Password or User
Password .
2. Type in the current password then press .
3. Leave other fields blank then select OK to continue.
4. Select to clear the old password.
NOTE: A keyboard is required to type in the password.
68 Notebook PC E-Manual
Save & Exit
To keep your configuration settings, select Save Changes and Exit before exiting the BIOS.
Notebook PC E-Manual 69
To update the BIOS:
1. Verify the Notebook PC’s exact model then download the latest
BIOS file for your model from the ASUS website.
2. Save a copy of the downloaded BIOS file to a flash disk drive.
3. Connect your flash disk drive to your Notebook PC.
4. Restart your Notebook PC then access the BIOS settings.
5. From the BIOS menu, select Advanced > ASUS EZ Flash 3 Utility , then press .
70 Notebook PC E-Manual
6. Locate your downloaded BIOS file in the flash disk drive then press . Follow the onscreen instructions to complete the update.
Notebook PC E-Manual 71
Recovering your system
Using recovery options on your Notebook PC allows you to restore the system to its original state or simply refresh its settings to help improve performance.
IMPORTANT!
• Backup all your data files before doing any recovery option on your
Notebook PC.
• Note down important customized settings such as network settings, user names, and passwords to avoid data loss.
• Ensure that your Notebook PC is plugged in to a power source before resetting your system.
Windows® 10 allows you to do any of the following recovery options:
•
•
Keep my files - This option allows you refresh your Notebook
PC without affecting personal files (photos, music, videos, documents).
Using this option, you can restore your Notebook PC to its default settings and delete other installed apps.
Remove everything - This option resets your Notebook PC to its factory settings. You must backup your data before doing this option.
72 Notebook PC E-Manual
•
•
Go back to an earlier build - This option allows you to go back to an earlier build. Use this option if this build is not working for you.
Advanced startup - Using this option allows you to perform other advanced recovery options on your Notebook PC such as:
- Using a USB drive, network connection or Windows recovery
DVD to startup your Notebook PC.
- Using to enable any of these advanced recovery options: System Restore, System Image Recovery,
Startup Repair, Command Prompt, UEFI Firmware Settings, and Startup Settings.
Performing a recovery option
Refer to the following steps if you want to access and use any of the available recovery options for your Notebook PC.
1. Launch and select Update and security .
Notebook PC E-Manual 73
2. Under the Update and security option, select Recovery then select the recovery option you would like to perform.
74 Notebook PC E-Manual
Chapter 5:
RAID Configuration
Notebook PC E-Manual 75
Intel
®
RAID configurations
If your device supports Intel® Rapid Storage Technology, you can create
RAID 0 or RAID 1 configurations.
RAID definitions
RAID 0 (Data striping) optimizes two identical storage devices to read and write data in parallel, interleaved stacks. Two storage devices perform the same work as a single drive but at a sustained data transfer rate, double that of a single storage device alone, thus improving data access and storage. Use of two new identical storage devices is required for this setup.
RAID 1 (Data mirroring) copies and maintains an identical image of data from one drive to a second drive. If one drive fails, the disk array management software directs all applications to the surviving drive as it contains a complete copy of the data in the other drive. This RAID configuration provides data protection and increases fault tolerance to the entire system. Use two new drives or use an existing drive and a new drive for this setup. The new drive must be of the same size or larger than the existing drive.
76 Notebook PC E-Manual
Creating a RAID set
1. Enter the BIOS Setup during POST.
2. Select or press F7 .
3. Go to Advanced > Intel(R) Rapid Storage Technology .
4. From the Intel(R) Rapid Storage Technology menu, select Create
RAID Volume and press <Enter>.
Notebook PC E-Manual 77
5. When the Name item is selected, enter a name for the RAID set and press <Enter>.
6. When the RAID Level item is selected, press <Enter> to select the
RAID level to create, and then press <Enter>.
7. Under , press <Enter> and select X for the disks you want to include in the RAID set.
8. When the Strip Size item is selected, press <Enter> to select strip size for the RAID array, and then press <Enter>. The available strip size values range from 4 KB to 128 KB.
NOTE: We recommend a lower strip size for server systems, and a higher strip size for multimedia computer systems used mainly for audio and video editing.
78 Notebook PC E-Manual
9. When the Capacity (MB) item is selected, enter the RAID volume capacity that you want and press <Enter>. The default value indicates the maximum allowed capacity.
10. When the Create Volume item is selected, press <Enter> to create the RAID volume and return to the Intel(R) Rapid Storage
Technology menu.
11. Save your changes and exit the BIOS Setup.
Notebook PC E-Manual 79
Deleting a RAID set
WARNING!
Be cautious when deleting a RAID set. You will lose all data on the storage devices when you delete a RAID set.
1. From the Intel(R) Rapid Storage Technology menu, select the
RAID volume you want to delete and press <Enter>. The following screen appears:
2. When the Delete item is selected, press <Enter>, then select
Yes to delete the RAID volume and return to the Intel(R) Rapid
Storage Technology menu, or select No to cancel.
80 Notebook PC E-Manual
Tips and FAQs
Notebook PC E-Manual 81
•
•
•
•
•
•
Useful tips for your Notebook PC
To help you maximize the use of your Notebook PC, maintain its system performance, and ensure all your data are kept secured, here are some useful tips that you can follow:
Update Windows® periodically to ensure that your applications have the latest security settings.
Use an anti-virus software to protect your data and keep this updated too.
Unless absolutely necessary, refrain from using force shutdown to turn off your Notebook PC.
Always backup your data and make it a point to create a backup data in an external storage drive.
Refrain from using the Notebook PC at extremely high temperatures. If you are not going to use your Notebook PC for a long period of time (at least a month), we recommend that you take out the battery if the battery is removable.
Disconnect all external devices and ensure you have the following items prior to resetting your Notebook PC:
- Product key for your operating systems and other installed applications
- Backup data
- Log in ID and password
- Internet connection information
82 Notebook PC E-Manual
Hardware FAQs
1. A black dot, or sometimes a colored dot, appears onscreen when I turn on the Notebook PC. What should I do?
Although these dots normally appear onscreen, they will not affect your system. If the incident continues and subsequently affects system performance, consult an authorized ASUS service center.
2. My display panel has an uneven color and brightness. How can I fix this?
The color and brightness of your display panel may be affected by the angle and current position of your Notebook PC. The brightness and color tone of your Notebook PC may also vary per model. You may use the function keys or the display settings in your operating system to adjust the appearance of your display panel.
3. How can I maximize my Notebook PC‘s battery life?
You can try doing any of the following suggestions:
• Use the function keys to adjust the display brightness.
• If you are not using any Wi-Fi connection, switch your system into Airplane mode .
• Disconnect unused USB devices.
• Close unused applications, especially those that take up too much system memory.
Notebook PC E-Manual 83
4. My battery charge indicator does not light up. What’s wrong?
• Check whether the power adapter or battery pack is attached correctly. You may also disconnect the power adapter or battery pack, wait for a minute, then reconnect them again to the power outlet and Notebook PC.
• If the problem still exists, contact your local ASUS service center for assistance.
5. Why is my touchpad not working?
Press to enable your touchpad.
6. When I play audio and video files, why can’t I hear any sound from my Notebook PC’s audio speakers?
You can try doing any of the following suggestions:
• Press to turn up the speaker volume.
• Check if your speakers were set to mute.
• Check if a headphone jack is connected to your Notebook
PC and remove it.
7. What should I do if my Notebook PC’s power adapter gets lost or my battery stops working?
Contact your local ASUS service center for assistance.
84 Notebook PC E-Manual
8. My Notebook PC cannot do keystrokes correctly because my cursor keeps on moving. What should I do?
Make sure that nothing accidentally touches or presses on your touchpad while you type on the keyboard. You can also disable your touchpad by pressing .
Notebook PC E-Manual 85
Software FAQs
1. When I turn on my Notebook PC, the power indicator lights up but nothing appears on my screen. What can I do to fix this?
You can try doing any of the following suggestions:
• Force shutdown your Notebook PC by pressing the power button for at least four (4) seconds. Check if the power adapter and battery pack are inserted correctly then turn on your Notebook PC.
• If the problem still exists, contact your local ASUS service center for assistance.
2. What should I do when my screen displays this message:
“Remove disks or other media. Press any key to restart.”?
You can try doing any of the following suggestions:
• Remove all connected USB devices then restart your
Notebook PC.
• Remove any optical discs that are left inside the optical drive then restart.
• If the problem still exists, your Notebook PC might have a memory storage problem. Contact your local ASUS service center for assistance.
3. My Notebook PC boots slower than usual and my operating system lags. How can I fix this?
Delete the applications you recently installed or were not included with your operating system package then restart your system.
86 Notebook PC E-Manual
4. My Notebook PC does not boot up. How can I fix this?
You can try doing any of the following suggestions:
• Remove all connected devices to your Notebook PC then restart your system.
• If the problem still exists, contact your local ASUS service center for assistance.
5. Why can’t my Notebook PC wake up from sleep mode?
• You need to press the power button to resume your last working state.
• Your system might have completely used up its battery power. Connect the power adapter to your Notebook PC and connect to a power outlet then press the power button.
Notebook PC E-Manual 87
88 Notebook PC E-Manual
Appendices
Notebook PC E-Manual 89
Internal Modem Compliancy
The Notebook PC with internal modem model complies with JATE (Japan), FCC
(US, Canada, Korea, Taiwan), and CTR21. The internal modem has been approved in accordance with Council Decision 98/482/EC for pan-European single terminal connection to the public switched telephone network (PSTN). However due to differences between the individual PSTNs provided in different countries, the approval does not, of itself, give an unconditional assurance of successful operation on every PSTN network termination point. In the event of problems you should contact your equipment supplier in the first instance.
Overview
On 4th August 1998 the European Council Decision regarding the CTR 21 has been published in the Official Journal of the EC. The CTR 21 applies to all non voice terminal equipment with DTMF-dialling which is intended to be connected to the analogue PSTN (Public Switched Telephone Network).
CTR 21 (Common Technical Regulation) for the attachment requirements for connection to the analogue public switched telephone networks of terminal equipment (excluding terminal equipment supporting the voice telephony justified case service) in which network addressing, if provided, is by means of dual tone multi-frequency signalling.
90 Notebook PC E-Manual
Network Compatibility Declaration
Statement to be made by the manufacturer to the Notified Body and the vendor:
“This declaration will indicate the networks with which the equipment is designed to work and any notified networks with which the equipment may have interworking difficulties.”
Statement to be made by the manufacturer to the user: “This declaration will indicate the networks with which the equipment is designed to work and any notified networks with which the equipment may have inter-working difficulties.
The manufacturer shall also associate a statement to make it clear where network compatibility is dependent on physical and software switch settings. It will also advise the user to contact the vendor if it is desired to use the equipment on another network.”
Up to now the Notified Body of CETECOM issued several pan-European approvals using CTR 21. The results are Europe’s first modems which do not require regulatory approvals in each individual European country.
Non-Voice Equipment
Answering machines and loud-speaking telephones can be eligible as well as modems, fax machines, auto-dialers and alarm systems. Equipment in which the end-to-end quality of speech is controlled by regulations (e.g. handset telephones and in some countries also cordless telephones) is excluded.
Notebook PC E-Manual 91
This table shows the countries currently under the CTR21 standard.
Country
Austria 1
Belgium
Czech Republic
Denmark 1
Finland
France
Germany
Greece
Hungary
Iceland
Ireland
Italy
Israel
Lichtenstein
Luxemburg
The Netherlands 1
Norway
Poland
Portugal
Spain
Sweden
Switzerland
United Kingdom
Applied
Yes
Yes
Yes
Yes
Yes
Yes
No
Yes
No
Yes
Yes
No
Yes
Yes
Yes
Yes
Yes
No
No
Still Pending
No
Yes
Yes
More Testing
No
No
No
No
No
No
Not Applicable
Yes
Not Applicable
No
No
Still Pending
No
No
No
Yes
No
Not Applicable
Not Applicable
Not Applicable
No
No
No
92 Notebook PC E-Manual
This information was copied from CETECOM and is supplied without liability. For updates to this table, you may visit http://www.cetecom.de/technologies/ctr_21.html.
1 National requirements will apply only if the equipment may use pulse dialling
(manufacturers may state in the user guide that the equipment is only intended to support DTMF signalling, which would make any additional testing superfluous).
In The Netherlands additional testing is required for series connection and caller
ID facilities.
Federal Communications Commission
Interference Statement
This device complies with FCC Rules Part 15. Operation is subject to the following two conditions:
•
•
• This device may not cause harmful interference.
• This device must accept any interference received, including interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a class
B digital device, pursuant to Part 15 of the Federal Communications Commission
(FCC) rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Notebook PC E-Manual 93
•
•
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
WARNING!
The use of a shielded-type power cord is required in order to meet
FCC emission limits and to prevent interference to the nearby radio and television reception. It is essential that only the supplied power cord be used. Use only shielded cables to connect I/O devices to this equipment. You are cautioned that changes or modifications not expressly approved by the party responsible for compliance could void your authority to operate the equipment.
(Reprinted from the Code of Federal Regulations #47, part 15.193, 1993.
Washington DC: Office of the Federal Register, National Archives and Records
Administration, U.S. Government Printing Office.)
FCC Radio Frequency (RF) Exposure Caution
Statement
WARNING!
Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment.
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. To maintain compliance with FCC RF exposure compliance requirements, please avoid direct contact to the transmitting antenna during transmitting. End users must follow the specific operating instructions for satisfying RF exposure compliance.
94 Notebook PC E-Manual
RF Exposure Information (SAR)
This device meets the government’s requirements for exposure to radio waves.
This device is designed and manufactured not to exceed the emission limits for exposure to radio frequency (RF) energy set by the Federal Communications
Commission of the U.S. Government.
The exposure standard for wireless device employs a unit of measurement known as the Specific Absorption Rate, or SAR. The SAR limit set by the FCC is 1.6 W/kg.
Tests for SAR are conducted using standard operating positions accepted by the
FCC with the device transmitting at its highest certified power level in all tested frequency bands.
Coating Notice
IMPORTANT!
To provide electrical insulation and maintain electrical safety, a coating is applied to insulate the device except on the areas where the I/O ports are located.
Notebook PC E-Manual 95
Compliance Statement of Innovation, Science and Economic Development Canada (ISED)
This device complies with Innovation, Science and Economic Development
Canada license exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device.
Operation in the band 5150-5250 MHz is only for indoor use to reduce the potential for harmful interference to co-channel mobile satellite systems
CAN ICES-3(B)/NMB-3(B)
Déclaration de conformité de Innovation,
Sciences et Développement économique Canada
(ISED)
Le présent appareil est conforme aux CNR d’ Innovation, Sciences et Développement
économique Canada applicables aux appareils radio exempts de licence.
L’exploitation est autorisée aux deux conditions suivantes: (1) l’appareil ne doit pas produire de brouillage, et (2) l’utilisateur de l’appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d’en compromettre le fonctionnement.
La bande 5150-5250 MHz est réservée uniquement pour une utilisation à l’intérieur afin de réduire les risques de brouillage préjudiciable aux systèmes de satellites mobiles utilisant les mêmes canaux.
CAN ICES-3(B)/NMB-3(B)
96 Notebook PC E-Manual
Radiation Exposure Statement
The product comply with the Canada portable RF exposure limit set forth for an uncontrolled environment and are safe for intended operation as described in this manual. The further RF exposure reduction can be achieved if the product can be kept as far as possible from the user body or set the device to lower output power if such function is available.
Déclaration relative à l’exposition aux radiations
Le produit est conforme aux limites d’exposition pour les appareils portables RF pour les États-Unis et le Canada établies pour un environnement non contrôlé.
Le produit est sûr pour une utilisation telle que décrite dans ce manuel. Le niveau d’exposition aux ondes radio peut être réduit en plaçant l’appareil aussi loin que possible du corps de l’utilisateur ou que le dispositif est réglé sur la puissance de sortie la plus faible si une telle fonction est disponible.
Notebook PC E-Manual 97
•
•
UL Safety Notices
Required for UL 1459 covering telecommunications (telephone) equipment intended to be electrically connected to a telecommunication network that has an operating voltage to ground that does not exceed 200V peak, 300V peak-to-peak, and 105V rms, and installed or used in accordance with the National Electrical
Code (NFPA 70).
When using the Notebook PC modem, basic safety precautions should always be followed to reduce the risk of fire, electric shock, and injury to persons, including the following:
• DO NOT use the Notebook PC near water, for example, near a bath tub, wash bowl, kitchen sink or laundry tub, in a wet basement or near a swimming pool.
• DO NOT use the Notebook PC during an electrical storm. There may be a remote risk of electric shock from lightning.
• DO NOT use the Notebook PC in the vicinity of a gas leak.
Required for UL 1642 covering primary (non-rechargeable) and secondary
(rechargeable) lithium batteries for use as power sources in products. These batteries contain metallic lithium, or a lithium alloy, or a lithium ion, and may consist of a single electrochemical cell or two or more cells connected in series, parallel, or both, that convert chemical energy into electrical energy by an irreversible or reversible chemical reaction.
DO NOT dispose the Notebook PC battery pack in a fire, as they may explode. Check with local codes for possible special disposal instructions to reduce the risk of injury to persons due to fire or explosion.
DO NOT use power adapters or batteries from other devices to reduce the risk of injury to persons due to fire or explosion. Use only UL certified power adapters or batteries supplied by the manufacturer or authorized retailers.
98 Notebook PC E-Manual
Power Safety Requirement
Products with electrical current ratings up to 6A and weighing more than 3Kg must use approved power cords greater than or equal to: H05VV-F, 3G, 0.75mm
H05VV-F, 2G, 0.75mm
2 .
2 or
TV Notices
Note to CATV System Installer—Cable distribution system should be grounded
(earthed) in accordance with ANSI/NFPA 70, the National Electrical Code (NEC), in particular Section 820.93, Grounding of Outer Conductive Shield of a Coaxial
Cable – installation should include bonding the screen of the coaxial cable to the earth at the building entrance.
Macrovision Corporation Product Notice
This product incorporates copyright protection technology that is protected by method claims of certain U.S.A. patents and other intellectual property rights owned by Macrovision Corporation and other rights owners. Use of this copyright protection technology must be authorized by Macrovision Corporation, and is intended for home and other limited viewing uses only unless otherwise authorized by Macrovision Corporation . Reverse engineering or disassembly is prohibited.
Prevention of Hearing Loss
To prevent possible hearing damage, do not listen at high volume levels for long periods.
Notebook PC E-Manual 99
Nordic Lithium Cautions (for lithium-ion batteries)
CAUTION! Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type recommended by the manufacturer. Dispose of used batteries according to the manufacturer’s instructions. (English)
ATTENZIONE! Rischio di esplosione della batteria se sostituita in modo errato.
Sostituire la batteria con un una di tipo uguale o equivalente consigliata dalla fabbrica. Non disperdere le batterie nell’ambiente. (Italian)
VORSICHT! Explosionsgefahr bei unsachgemäßen Austausch der Batterie. Ersatz nur durch denselben oder einem vom Hersteller empfohlenem ähnlichen Typ.
Entsorgung gebrauchter Batterien nach Angaben des Herstellers. (German)
ADVARSELI! Lithiumbatteri - Eksplosionsfare ved fejlagtig håndtering. Udskiftning må kun ske med batteri af samme fabrikat og type. Levér det brugte batteri tilbage til leverandøren. (Danish)
VARNING! Explosionsfara vid felaktigt batteribyte. Använd samma batterityp eller en ekvivalent typ som rekommenderas av apparattillverkaren. Kassera använt batteri enligt fabrikantens instruktion. (Swedish)
VAROITUS! Paristo voi räjähtää, jos se on virheellisesti asennettu. Vaihda paristo ainoastaan laitevalmistajan sousittelemaan tyyppiin. Hävitä käytetty paristo valmistagan ohjeiden mukaisesti. (Finnish)
ATTENTION! Danger d’explosion si la batterie n’est pas correctement remplacée.
Remplacer uniquement avec une batterie de type semblable ou équivalent, recommandée par le fabricant. Jeter les batteries usagées conformément aux instructions du fabricant. (French)
ADVARSEL! Eksplosjonsfare ved feilaktig skifte av batteri. Benytt samme batteritype eller en tilsvarende type anbefalt av apparatfabrikanten. Brukte batterier kasseres i henhold til fabrikantens instruksjoner. (Norwegian)
(Japanese)
ВНИМАНИЕ! При замене аккумулятора на аккумулятор иного типа возможно его возгорание. Утилизируйте аккумулятор в соответствии с инструкциями производителя. (Russian)
100 Notebook PC E-Manual
English
Finnish
French
CTR 21 Approval (for Notebook PC with built-in
Modem)
Danish
Dutch
Notebook PC E-Manual 101
German
Greek
Italian
Portuguese
Spanish
Swedish
102 Notebook PC E-Manual
Declaration of Compliance for Product
Environmental Regulation
ASUS follows the green design concept to design and manufacture our products, and makes sure that each stage of the product life cycle of ASUS product is in line with global environmental regulations. In addition, ASUS disclose the relevant information based on regulation requirements.
Please refer to http://csr.asus.com/Compliance.htm for information disclosure based on regulation requirements ASUS is complied with.
EU REACH and Article 33
Complying with the REACH (Registration, Evaluation, Authorization, and
Restriction of Chemicals) regulatory framework, we publish the chemical substances in our products at ASUS REACH website at http://csr.asus.com/english/REACH.htm.
EU RoHS
This product complies with the EU RoHS Directive. For more details, see http://csr.asus.com/english/article.aspx?id=35.
Japan JIS-C-0950 Material Declarations
Information on Japan RoHS (JIS-C-0950) chemical disclosures is available on http://csr.asus.com/english/article.aspx?id=19.
India RoHS
This product complies with the “India E-Waste (Management) Rules, 2016” and prohibits use of lead, mercury, hexavalent chromium, polybrominated biphenyls
(PBBs) and polybrominated diphenyl ethers (PBDEs) in concentrations exceeding
0.1% by weight in homogenous materials and 0.01% by weight in homogenous materials for cadmium, except for the exemptions listed in Schedule II of the Rule.
Notebook PC E-Manual 103
Vietnam RoHS
ASUS products sold in Vietnam, on or after September 23, 2011, meet the requirements of the Vietnam Circular 30/2011/TT-BCT.
Các sản phẩm ASUS bán tại Việt Nam, vào ngày 23 tháng 9 năm2011 trở về sau, đều phải đáp ứng các yêu cầu của Thông tư 30/2011/TT-BCT của Việt Nam.
ASUS Recycling/Takeback Services
ASUS recycling and takeback programs come from our commitment to the highest standards for protecting our environment. We believe in providing solutions for you to be able to responsibly recycle our products, batteries, other components as well as the packaging materials.
Please go to http://csr.asus.com/english/Takeback.htm for detailed recycling information in different regions.
Rechargeable Battery Recycling Service in
North America
For US and Canada customers, you can call 1-800-822-8837
(toll-free) for recycling information of your ASUS products’ rechargeable batteries.
Ecodesign Directive
European Union announced a framework for the setting of ecodesign requirements for energy-related products (2009/125/EC). Specific Implementing
Measures are aimed at improving environmental performance of specific products or across multiple product types. ASUS provides product information on the CSR website. Further information could be found at https://csr.asus.com/english/article.aspx?id=1555.
104 Notebook PC E-Manual
ENERGY STAR Qualified Product
ENERGY STAR is a joint program of the U.S. Environmental
Protection Agency and the U.S. Department of Energy helping us all save money and protect the environment through energy efficient products and practices.
All ASUS products with the ENERGY STAR logo comply with the ENERGY STAR standard, and the power management feature is enabled by default. The monitor is automatically set to sleep within 10 minutes of user inactivity; the computer is automatically set to sleep within 30 minutes of user inactivity. To wake your computer, click the mouse, press any key on the keyboard, or press the power button.
Please visit http://www.energystar.gov/powermanagement for detail information on power management and its benefits to the environment. In addition, please visit http://www.energystar.gov for detail information on the ENERGY STAR joint program.
NOTE: Energy Star is NOT supported on FreeDOS and Linux-based operating systems.
EPEAT Registered Products
The public disclosure of key environmental information for ASUS EPEAT (Electronic
Product Environmental Assessment Tool) registered products is available at https://csr.asus.com/english/article.aspx?id=41. More information about EPEAT program and purchase guidance can be found at www.epeat.net.
Notebook PC E-Manual 105
Regional notice for Singapore
Complies with
IMDA Standards
DB103778
This ASUS product complies with IMDA Standards.
•
•
Notices for removable batteries
Risk of explosion if battery is replaced by an incorrect type.
The battery and its component must be recycled or disposed of properly.
•
•
Avis concernant les batteries remplaçables
La batterie de l’appareil peut présenter un risque d’incendie ou de brûlure si celle-ci est retirée ou désassemblée.
La batterie et ses composants doivent être recyclés de façon appropriée.
106 Notebook PC E-Manual
Simplified EU Declaration of Conformity
ASUSTek Computer Inc. hereby declares that this device is in compliance with the essential requirements and other relevant provisions of Directive 2014/53/EU. Full text of EU declaration of conformity is available at https://www.asus.com/support/.
The WiFi operating in the band 5150-5350 MHz shall be restricted to indoor use for countries listed in the table below:
AT
DE
LV
NO
FI
BE
IS
LI
PL
SE
BG
IE
LT
PT
CH
CZ
IT
LU
RO
UK
DK
EL
HU
SI
HR
EE
ES
MT
SK
FR
CY
NL
TR
Notebook PC E-Manual 107
108 Notebook PC E-Manual
advertisement
Related manuals
advertisement
Table of contents
- 7 About this manual
- 9 Conventions used in this manual
- 9 Icons
- 9 Typography
- 10 Safety precautions
- 10 Using your Notebook PC
- 11 Caring for your Notebook PC
- 12 Proper disposal
- 13 Chapter 1: Hardware Setup
- 14 Getting to know your Notebook PC
- 14 Top View
- 19 Bottom View
- 21 Right View
- 23 Left View
- 25 Front View
- 27 Chapter 2: Using your Notebook PC
- 28 Getting started
- 28 Charge your Notebook PC
- 30 Lift to open the display panel
- 30 Press the power button
- 31 Using the touchpad
- 38 Using the keyboard
- 38 HotKeys
- 39 Function keys
- 39 Windows® 10 keys
- 40 Using the numeric keypad
- 41 Chapter 3: Working with Windows® 10
- 42 Starting for the first time
- 43 Start menu
- 45 Windows® apps
- 46 Working with Windows® apps
- 46 Customizing Windows® apps
- 49 Task view
- 50 Snap feature
- 50 Snap hotspots
- 52 Action Center
- 53 Other keyboard shortcuts
- 55 Connecting to wireless networks
- 55 Wi-Fi
- 56 Bluetooth
- 57 Airplane mode
- 58 Connecting to wired networks
- 60 Turning your Notebook PC off
- 61 Putting your Notebook PC to sleep
- 63 Chapter 4: Power-On Self-Test (POST)
- 64 The Power-On Self-Test (POST)
- 64 Using POST to access BIOS and Troubleshoot
- 64 BIOS
- 64 Accessing BIOS
- 65 BIOS Settings
- 72 Recovering your system
- 73 Performing a recovery option
- 75 Chapter 5: RAID Configuration
- 76 Intel® RAID configurations
- 76 RAID definitions
- 77 Creating a RAID set
- 80 Deleting a RAID set
- 81 Tips and FAQs
- 82 Useful tips for your Notebook PC
- 83 Hardware FAQs
- 86 Software FAQs
- 89 Appendices
- 90 Internal Modem Compliancy
- 90 Overview
- 91 Network Compatibility Declaration
- 91 Non-Voice Equipment
- 93 Federal Communications Commission Interference Statement
- 94 FCC Radio Frequency (RF) Exposure Caution Statement
- 95 RF Exposure Information (SAR)
- 95 Coating Notice
- 96 Compliance Statement of Innovation, Science and Economic Development Canada (ISED)
- 96 Déclaration de conformité de Innovation, Sciences et Développement économique Canada (ISED)
- 97 Radiation Exposure Statement
- 97 Déclaration relative à l’exposition aux radiations
- 98 UL Safety Notices
- 99 Power Safety Requirement
- 99 TV Notices
- 99 Macrovision Corporation Product Notice
- 99 Prevention of Hearing Loss
- 100 Nordic Lithium Cautions (for lithium-ion batteries)
- 101 CTR 21 Approval (for Notebook PC with built-in Modem)
- 103 Declaration of Compliance for Product Environmental Regulation
- 103 EU REACH and Article 33
- 103 EU RoHS
- 103 Japan JIS-C-0950 Material Declarations
- 103 India RoHS
- 104 Vietnam RoHS
- 104 ASUS Recycling/Takeback Services
- 104 Rechargeable Battery Recycling Service in North America
- 104 Ecodesign Directive
- 105 ENERGY STAR Qualified Product
- 105 EPEAT Registered Products
- 106 Regional notice for Singapore
- 106 Notices for removable batteries
- 106 Avis concernant les batteries remplaçables
- 107 Simplified EU Declaration of Conformity