Arkon RM60802T Slim-Grip Ultra Windshield Mount for iPhone 11, XS, XR, X, 8, Galaxy 7.0, 8.0 Tablets Product Manual

RM60802T | Robust Mount Series – Slim-Grip® Ultra™ Windshield Suction Mount
RM60802T
rev.111517
Package Contents:
RM0802T – Heavy-Duty 80mm Suction Mounting Pedestal
SM060-2 – Slim-Grip® Ultra™ Universal Smartphone
and Midsize Tablet Holder
IMPORTANT:
Select the appropriate size support legs and install to holder. For large smartphones, midsize tablets, or devices with cases, use included long support legs.
1 Attach pedestal to windshield, engage suction lock to secure.
2 Attach Slim-Grip Ultra holder by sliding the Dual T-Tabs on the
pedestal head into the Dual T-Slots of the holder.
SSuction Lock
Lever
3 Insert smartphone or midsize tablet by placing it on the 2 lower legs
and pushing down on the spring-loaded bottom of the holder. Loosen
adjustment knob to adjust position and angle. Retighten to set.
Optional: For dashboard mounting, use the included adhesive
mounting disk. NOTE: Make sure surface is dry and clean prior to
adhering disk. Allow disk to cure for 24 hours prior to use.
Adjustment Knob
Push down on
lower legs to
mount device
!
Safety Precautions
Do not install Arkon products over an air bag cover or within the air
bag deployment zone. Arkon Resources, Inc. assumes no responsibility of liability for injury or death as a result of car crashes and / or air
bag deployment.
Arkon is not responsible for any damages caused to your vehicle, your
device, or yourself due to the installation or use of this mount.
The Mobile Mounting Specialists™
Consumer Hotline:
USA (800) 841-0884
INT’L (626) 254-9005
Monday - Friday 9 am - 5 pm, PST
www.arkon.com
Arcadia, CA 91006 USA
Designed in USA | Made in Taiwan
© Copyright 2017 Arkon Resources, Inc.

* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project