Panasonic DMP-BDT220, DMP-BDT221 Operating Instructions Manual


Add to my manuals
44 Pages

advertisement

Panasonic DMP-BDT220, DMP-BDT221 Operating Instructions Manual | Manualzz

DMP-BDT220GNGCGAGW-VQT3V64.book 1 ページ 2012年2月6日 月曜日 午前9時52分

Operating Instructions

Blu-ray Disc

TM

Player

Model No. DMP-BDT220

Thank you for purchasing this product.

For optimum performance and safety, please read these instructions carefully.

Please keep this manual for future reference.

GN GC GA GW until

2012/2/20

VQT3V64

DMP-BDT220GNGCGAGW-VQT3V64.book 2 ページ 2012年2月6日 月曜日 午前9時52分

Safety precautions

WARNING

Unit

To reduce the risk of fire, electric shock or product damage,

≥ Do not expose this unit to rain, moisture, dripping or splashing.

≥ Do not place objects filled with liquids, such as vases, on this unit.

≥ Use only the recommended accessories.

≥ Do not remove covers.

≥ Do not repair this unit by yourself. Refer servicing to qualified service personnel.

≥ Do not let metal objects fall inside this unit.

≥ Do not place heavy items on this unit.

AC mains lead

To reduce the risk of fire, electric shock or product damage,

≥ Ensure that the power supply voltage corresponds to the voltage printed on this unit.

≥ Insert the mains plug fully into the socket outlet.

≥ Do not pull, bend, or place heavy items on the lead.

≥ Do not handle the plug with wet hands.

≥ Hold onto the mains plug body when disconnecting the plug.

≥ Do not use a damaged mains plug or socket outlet.

Install this unit so that the AC mains lead can be unplugged from the socket outlet immediately if any problem occurs.

SD card

Keep the Memory Card out of reach of children to prevent swallowing.

CAUTION

Unit

≥ This unit utilizes a laser. Use of controls or adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure.

≥ Do not place sources of naked flames, such as lighted candles, on this unit.

≥ This unit may receive radio interference caused by mobile telephones during use. If such interference occurs, please increase separation between this unit and the mobile telephone.

[For[Australia[and[New[Zealand]

≥ This unit is intended for use in moderate climates.

[Except[Australia[and[New[Zealand]

≥ This unit is intended for use in tropical climates.

Placement

Place this unit on an even surface.

To reduce the risk of fire, electric shock or product damage,

≥ Do not install or place this unit in a bookcase, built-in cabinet or in another confined space. Ensure this unit is well ventilated.

≥ Do not obstruct this unit’s ventilation openings with newspapers, tablecloths, curtains, and similar items.

≥ Do not place the unit on amplifiers/receivers or equipment that may become hot. The heat can damage the unit.

≥ Do not expose this unit to direct sunlight, high temperatures, high humidity, and excessive vibration.

Batteries

Mishandling of batteries can cause electrolyte leakage and may cause a fire.

≥ Danger of explosion if battery is incorrectly replaced.

Replace only with the type recommended by the manufacturer.

≥ When disposing the batteries, please contact your local authorities or dealer and ask for the correct method of disposal.

≥ Do not mix old and new batteries or different types at the same time.

≥ Do not heat or expose to flame.

≥ Do not leave the battery(ies) in a car exposed to direct sunlight for a long period of time with doors and windows closed.

≥ Do not take apart or short circuit.

≥ Do not recharge alkaline or manganese batteries.

≥ Do not use batteries if the covering has been peeled off.

Remove batteries if you do not intend to use the remote control for a long period of time. Store in a cool, dark place.

2 VQT3V64

DMP-BDT220GNGCGAGW-VQT3V64.book 3 ページ 2012年2月6日 月曜日 午前9時52分

(For Saudi Arabia)

How to replace the fuse

The location of the fuse differ according to the type of AC mains plug (figures A and B). Confirm the AC mains plug fitted and follow the instructions below.

Illustrations may differ from actual AC mains plug.

1. Open the fuse cover with a screwdriver.

Figure A Figure B

Fuse cover

2. Replace the fuse and close or attach the fuse cover.

Figure A

Fuse

(5 ampere)

Figure B

Fuse

(5 ampere)

Table of contents

Getting started

Safety precautions . . . . . . . . . . . . . . . . . . . . . . . 2

Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

Unit and media care. . . . . . . . . . . . . . . . . . . . . . 4

Playable media . . . . . . . . . . . . . . . . . . . . . . . . . 5

Control reference guide . . . . . . . . . . . . . . . . . . . 8

Connections and settings

STEP 1 : Connecting to a TV. . . . . . . . . . . . . . . 9

STEP 2 : Connecting to an amplifier/receiver . . . . . . . . . . . . . 10

STEP 3 : Connecting to the network . . . . . . . . 11

STEP 4 : Connecting the AC mains lead. . . . . 11

STEP 5 : Settings . . . . . . . . . . . . . . . . . . . . . . 12

STEP 6 : Reprogramming the remote control. . . . . . . . . . . . . . . 14

Playback

Inserting or removing media . . . . . . . . . . . . . . 15

HOME menu . . . . . . . . . . . . . . . . . . . . . . . . . . 15

Multi User Mode. . . . . . . . . . . . . . . . . . . . . . . . 16

Playback . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17

VIERA Connect (Enjoying Internet

Service) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20

Home Network feature. . . . . . . . . . . . . . . . . . . 21

VIERA Link “HDAVI Control™” . . . . . . . . . . . . 23

Settings

Option menu . . . . . . . . . . . . . . . . . . . . . . . . . . 24

Setup menu . . . . . . . . . . . . . . . . . . . . . . . . . . . 27

Reference

Troubleshooting guide . . . . . . . . . . . . . . . . . . . 33

Messages . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37

Supplemental information . . . . . . . . . . . . . . . . 39

Specifications. . . . . . . . . . . . . . . . . . . . . . . . . . 40

Precautions of wireless LAN connection . . . . . 41

≥ Restriction on use of unauthorized copied content ( > 38)

≥ Firmware updates ( > 13)

VQT3V64 3

DMP-BDT220GNGCGAGW-VQT3V64.book 4 ページ 2012年2月6日 月曜日 午前9時52分

Getting started

Accessories

Check the supplied accessories before using this unit.

[For[Australia[and[New[Zealand]

1 Remote control

(N2QAYB000726)

2 Batteries for remote control

1 Audio/Video cable

1 AC mains lead

[For]the]Middle]East]

1 Remote control

(N2QAYB000726)

2 Batteries for remote control

2 AC mains lead*

1 HDMI Cable

[For[South[East[Asia]

1 Remote control

(N2QAYB000726)

2 Batteries for remote control

2 AC mains lead*

1 HDMI Cable

[For[India]

1 Remote control

(N2QAYB000726)

2 Batteries for remote control

1 AC mains lead

1 HDMI Cable

* See page 11 for more information.

≥ Product numbers provided in these operating instructions correct as of January 2012. These may be subject to change.

≥ Do not use AC mains lead with other equipment.

Using the remote control

Insert so the poles ( i and j ) match those in the remote control.

R6/LR6, AA

(Alkaline or manganese batteries)

Point it at the remote control signal sensor on this unit. ( > 8)

Unit and media care

Clean this unit with a soft, dry cloth

≥ Never use alcohol, paint thinner or benzine to clean this unit.

≥ Before using chemically treated cloth, carefully read the instructions that came with the cloth.

This unit’s lens

Lens cleaner: RP-CL720AE

≥ This lens cleaner may not be for sale depending on the region.

≥ This lens cleaner is sold as specific for DIGA, but can be used on this unit as well.

Clean discs

DO DO NOT

Wipe with a damp cloth and then wipe dry.

Disc and card handling precautions

≥ Handle discs by the edges to avoid inadvertent scratches or fingerprints on the disc.

≥ Do not attach labels or stickers to discs.

≥ Do not use disc cleaning sprays, benzine, thinner, static electricity prevention liquids or any other solvent.

≥ Clean any dust, water, or foreign matter from the terminals on the rear side of the card.

≥ Do not use the following discs:

– Discs with exposed adhesive from removed stickers or labels (rented discs, etc.).

– Discs that are badly warped or cracked.

– Irregularly shaped discs, such as heart shapes.

To dispose or transfer this unit

The unit may keep the user settings information in the unit. If you discard this unit either by disposal or transfer, then follow the procedure to return all the settings to the factory presets to delete the user settings. ( > 33, “To return all settings to the factory preset.”)

≥ The operation history may be recorded in the memory of this unit.

4 VQT3V64

DMP-BDT220GNGCGAGW-VQT3V64.book 5 ページ 2012年2月6日 月曜日 午前9時52分

Playable media

Device Disc markings

BD

Device types

BD-Video

BD-RE

BD-R

DVD-Video

Contents format

Video

Video, JPEG, MPO

Video, DivX ® , MKV

Video

DVD-R

DVD

Video, AVCHD, DivX ® ,

MKV, JPEG, MPO,

FLAC, MP3, WAV

DVD-R DL

DVD-RW

Video, AVCHD

— +R/+RW/+R DL

Music CD Music [CD-DA]

CD

SD

CD-R

CD-RW

DivX ® , MKV, JPEG,

MPO, FLAC, MP3,

Music [CD-DA], WAV

SD Memory Card (from 8 MB to 2 GB)

SDHC Memory Card (from 4 GB to 32 GB)

SDXC Memory Card (48 GB, 64 GB)

(Compatible with both mini and micro types)

AVCHD, AVCHD 3D,

MP4, MPEG2, JPEG,

MPO

USB

USB devices

(up to 2 TB)

DivX ® , MKV, MP4,

MPEG, JPEG, MPO,

FLAC, MP3, WAV

≥ See pages 6–7 and 40 for more information on the types of content that can be played.

VQT3V64 5

DMP-BDT220GNGCGAGW-VQT3V64.book 6 ページ 2012年2月6日 月曜日 午前9時52分

Discs that cannot be played by this unit

≥ DVD-RAM

≥ Super Audio CD

≥ Photo CD

≥ DVD-Audio

≥ Video CD and Super Video CD

≥ WMA discs

≥ DivX Plus HD discs

≥ HD DVD

Region management information

BD-Video:

[For[South[East[Asia]

This unit can play BD-Video discs supporting the region code

“ A ”.

Example:

[For[Australia[and[New[Zealand]

[For]the]Middle]East]

This unit can play BD-Video discs supporting the region code

“ B ”.

Example:

[For[India]

This unit can play BD-Video discs supporting the region code

“ C ”.

Example:

DVD-Video:

[For]the]Middle]East]

This unit can play DVD-Video discs supporting the region number “ 2 ” or

“ ALL ”.

Example:

2 ALL

2

3

5

[For[South[East[Asia]

This unit can play DVD-Video discs supporting the region number “ 3 ” or

“ ALL ”.

Example:

3 ALL

2

3

4

[For[Australia[and[New[Zealand]

This unit can play DVD-Video discs supporting the region number “ 4 ” or

“ ALL ”.

Example:

4 ALL

2

3

4

[For[India]

This unit can play DVD-Video discs supporting the region number “ 5 ” or

“ ALL ”.

Example:

5 ALL

2

3

5

6 VQT3V64

DMP-BDT220GNGCGAGW-VQT3V64.book 7 ページ 2012年2月6日 月曜日 午前9時52分

Finalize

DVD-R/RW/R DL, +R/+RW/+R DL and CD-R/RW recorded by a recorder, etc. needs to be finalized by the recorder to play on this unit. Please refer to the recorder’s instructions.

BD-Video

≥ This unit supports high bit rate audio (Dolby

Digital Plus, Dolby TrueHD, DTS-HD High

Resolution Audio and DTS-HD Master Audio) adopted in BD-Video.

≥ If “Dolby D/Dolby D +/Dolby TrueHD” is set to

“PCM”, the maximum possible number of Dolby sound is 5.1ch PCM.

( > 28)

3D

≥ 3D videos and 3D still pictures can be played back when this unit is connected to a 3D compatible TV using a High Speed HDMI

Cable.

≥ 2D video can be enjoyed as 3D virtually. ( > 26)

Music CD

Operation and sound quality of CDs that do not conform to CD-DA specifications (copy control

CDs, etc.) cannot be guaranteed.

SD card

≥ miniSD Cards, microSD Cards, microSDHC Cards and microSDXC Cards can be used, but must be used with an adaptor card. These are usually supplied with such cards, or otherwise customer provided.

≥ To protect the card’s contents, move the record prevention tab (on the SD card) to “LOCK”.

≥ This unit is compatible with SD Memory Cards that meet SD Card Specifications FAT12 and

FAT16 formats, as well as SDHC Memory

Cards in FAT32 format and SDXC Memory

Cards in exFAT.

≥ If the SD card is used with incompatible computers or devices, recorded contents may be erased due to the card being formatted etc.

≥ Useable memory may be slightly less than the card capacity.

USB device

≥ This unit does not guarantee connection with all

USB devices.

≥ This unit does not support USB device charging.

≥ FAT12, FAT16, FAT32 and NTFS file systems are supported.

≥ This unit supports USB2.0 High Speed.

≥ This unit can support an HDD formatted to

FAT32 and NTFS.

Some types of HDD may require the use of its external power supply unit.

BD-RE, BD-R

Discs recorded in DR mode using Panasonic

Blu-ray Disc recorders may not play back the audio etc., correctly.

≥ It may not be possible to play the above media in some cases due to the type of media, the condition of the recording, the recording method and how the files were created.

≥ The producers of the disc can control how discs are played, so you may not always be able to control play as described in these operating instructions. Read the disc’s instructions carefully.

VQT3V64 7

DMP-BDT220GNGCGAGW-VQT3V64.book 8 ページ 2012年2月6日 月曜日 午前9時52分

Control reference guide

10

1

1

2

3

4

5

6

7

8

9

11

12

13

14

15

16

17

18

19

20

21

22

5

1 Turn the unit on and off

2 TV operation buttons ( > 14)

You can operate the TV through the unit’s remote control.

[ Í TV] : Turn the television on and off

[AV] : Switch the input select

[ i j VOL] : Adjust the volume

3 Select title numbers, etc./Enter numbers or characters

4 Cancel

5 Basic playback control buttons ( > 17)

6 Show status messages ( > 18)

7 Show Top menu ( > 18)

8 Show Option menu ( > 24)

9 Coloured buttons (red, green, yellow, blue)

Used for various purposes depending on the display

10 Transmit the remote control signal

11 Open or close the disc tray ( > 15)

12 Show the Home screen of the VIERA

Connect ( > 20)

13 Start up a video communication ( > 20)

14 Set up 3D effects ( > 26)

15 Switch on/off Secondary Video

(Picture-in-picture) ( > 24)

16 Switch on/off Secondary Audio ( > 24)

17 Select audio ( > 17)

18 Exit the menu screen

19 Show Pop-up menu ( > 18)

20 Show HOME menu ( > 15)

21 [ 3 , 4 , 2 , 1 ] : Move the highlight for selection

[OK] : Confirm the selection

( 2; )( ;1 ) : Frame-by-frame ( > 17)

22 Return to previous screen

10

CALL

SD CARD

2 3 4

1 Standby/on switch ( Í /I ) ( > 12)

Press to switch the unit from on to standby mode or vice versa. In standby mode, the unit is still consuming a small amount of power.

2 Disc tray ( > 15)

3 SD card slot ( > 15)

4 USB port ( > 15)

5 CALL LED

The LED will light up when this unit receives incoming call etc. of the video communication. ( > 20)

6 7 8 9

Pull to flip down the front panel.

6 Remote control signal sensor

Distance: Within approx. 7 m

Angle: Approx. 20 e up and down, 30 e left and right

7 Display

8 Stop ( > 17)

9 Start play ( > 17)

10 Open or close the disc tray ( > 15)

Rear panel terminals ( > 9–11)

8 VQT3V64

DMP-BDT220GNGCGAGW-VQT3V64.book 9 ページ 2012年2月6日 月曜日 午前9時52分

Connections and settings

STEP 1 : Connecting to a TV

Perform either one of the following connections in accordance with your TV input terminal.

≥ Before making any connections, we recommend that you temporarily disconnect all the units from AC power.

≥ Do not connect video signals through a video recorder. Due to copy guard protection the picture may not be displayed properly.

≥ Use the High Speed HDMI cables. Non-HDMI-compliant cables cannot be utilized.

[For[the[Middle[East,[South[East[Asia[and[India] The HDMI-compliant cable is supplied with this unit.

It is recommended that you use Panasonic’s HDMI cable. When outputting 1080p signal, please use

HDMI cables 5.0 meters or less.

Recommended part number (High Speed HDMI Cable):

RP-CDHS15 (1.5 m), RP-CDHS30 (3.0 m), RP-CDHS50 (5.0 m), etc.

HDMI AV OUT (High quality)

HDMI IN

HDMI cable

(only supplied for the Middle East, South East Asia and India)

VIDEO OUT (Standard quality)

VIDEO IN

L

AUDIO IN

R

Audio/Video cable

(only supplied for Australia and New Zealand)

≥ Connect terminals of the same colour.

VQT3V64 9

DMP-BDT220GNGCGAGW-VQT3V64.book 10 ページ 2012年2月6日 月曜日 午前9時52分

STEP 2 : Connecting to an amplifier/receiver

Perform either one of the following connections in accordance with your amplifier/receiver input terminal.

HDMI AV OUT

HDMI cable

(only supplied for the Middle East, South East Asia and India) HDMI cable

HDMI IN

HDMI OUT

(ARC)

HDMI IN

(ARC)

Amplifier/receiver

≥ Set “Digital Audio Output” ( > 28).

≥ When connecting to a non-3D compatible amplifier/receiver, connect this unit to a TV via HDMI AV

OUT, then connect the TV and the amplifier/receiver. Please note, however, that the audio can only be up to 5.1ch.

≥ When using the TV or amplifier/receiver that does not have the indication of “(ARC)”

(non-ARC-compatible) on the HDMI terminal, in order to enjoy TV’s sound by amplifier/receiver it is also required to connect the amplifier/receiver and TV using an optical digital cable.

OPTICAL

Optical digital cable

OPTICAL IN

Amplifier/receiver

≥ Set “HDMI Audio Output” to “Off” ( > 28).

≥ Set “Digital Audio Output” ( > 28).

10 VQT3V64

DMP-BDT220GNGCGAGW-VQT3V64.book 11 ページ 2012年2月6日 月曜日 午前9時52分

STEP 3 : Connecting to the network

The following services can be used when this unit is connected to broadband.

≥ Firmware can be updated ( > 13)

≥ You can enjoy BD-Live ( > 18)

(

You can enjoy VIERA Connect (

> 21)

> 20)

≥ You can access other devices (Home Network)

≥ This unit supports Wi-Fi Direct TM and can make a wireless connection to wireless devices without router.

You can use this function when enjoying Home Network feature, etc. Internet access is not available while connected via Wi-Fi Direct TM . ( > 21, 30)

For details about connection method, refer to the instructions supplied with the connected equipment.

Wireless LAN connection

This unit can be connected to a wireless router wirelessly.

Wireless router, etc.

Internet

≥ For up-to-date compatibility information on your wireless router, refer to http://panasonic.jp/support/global/cs/

(This site is in English only.)

≥ The unit is not compatible with public wireless LAN services provided in airports, stations, cafes, etc.

≥ See page 41 for the precautions of wireless LAN connection.

LAN cable connection

LAN Cable

Broadband router, etc.

Internet

≥ Use category 5 or above straight LAN cables (STP) when connecting to peripheral devices.

≥ Inserting any cable other than a LAN cable in the LAN terminal can damage the unit.

STEP 4 : Connecting the AC mains lead

[For]the]Middle]East] Use the AC mains lead that matches the socket for the area you live in.

[For\Saudi\Arabia]

BE SURE TO READ THE CAUTION FOR THE AC MAINS LEAD ON PAGE 3 BEFORE

CONNECTION.

[For[South[East[Asia]

AC mains lead with a label is for Thailand.

AC mains lead without a label is for areas other than Thailand.

To a household mains socket

AC mains lead (supplied)

≥ This unit consumes a small amount of AC power ( > 40) even when turned off. In the interest of power conservation, if you will not be using this unit for an extended period of time, it can be disconnected.

VQT3V64 11

DMP-BDT220GNGCGAGW-VQT3V64.book 12 ページ 2012年2月6日 月曜日 午前9時52分

STEP 5 : Settings

Easy Setting

After connecting your new player for the first time and pressing [ Í ], a screen for the basic settings will appear.

Preparation

Turn on the television and select the appropriate video input on the television.

1

Press [ Í ].

Setup screen appears.

2

Follow the on-screen instructions and apply the settings.

Easy Network Setting

After completing “Easy Setting”, you can perform

“Easy Network Setting”.

Select “Wired” or “Wireless” and press [OK].

Easy Network Setting

Select a connection mode.

Current setting : Wired

≥ You can perform this setup anytime by selecting “Easy

Setting” in the Setup menu. ( > 31)

≥ If this unit is connected to a Panasonic TV (VIERA) supporting HDAVI Control 2 or later via an HDMI cable, then the setting information on the TV is acquired by this unit.

Wired

Wireless

OK

RETURN

“Wired” connection

Follow the on-screen instructions to apply your connection settings.

“Wireless” connection

Before beginning wireless connection setup

≥ Obtain your network name (SSID* 1 ).

≥ If your wireless connection is encrypted, please be sure that you know your encryption key.

Select “Search for wireless network” or “WPS

(PUSH button)” and press [OK], then follow the on-screen instructions and apply the settings.

e.g.,

Wireless Settings

Select a connection method to wireless access point.

Please refer to the operating instructions of your wireless access point about connection methods.

Search for wireless network

WPS (PUSH button)

WPS (PUSH button):

If your wireless router supports

WPS (PUSH button), you can easily perform the settings by pressing WPS button on it.

e.g.

* 2

12 VQT3V64

DMP-BDT220GNGCGAGW-VQT3V64.book 13 ページ 2012年2月6日 月曜日 午前9時52分

WPS (Wi-Fi Protected Setup TM ) is a standard that facilitates settings relating to the connection and security of wireless LAN devices.

1 Press WPS button or corresponding button of the wireless router until the lamp starts flashing.

≥ For details, refer to the operating instruction of the wireless router.

2 Press [OK].

Search for wireless network:

≥ When you select “Search for wireless network”, the available wireless networks will be displayed. Select your network name and press

[OK].

– If your network name is not displayed, search again by pressing the red button on the remote control.

– Stealth SSID will not be displayed when you select “Search for wireless network”. Enter manually by using “Manual setting”.

(Press [HOME] > select “Setup” > [OK] > select “Player Settings” > select “Network” >

[OK] > select “Network Settings” > [OK] > select “Wireless Settings” > [OK] > select

“Connection Setting” > [OK] > select

“Manual setting” > [OK])

≥ If your wireless network is encrypted,

Encryption Key input screen will be displayed.

Input the encryption key of your network.

≥ Refer to the operating instructions of the hub or router.

≥ You can perform this setup anytime by selecting “Easy

Network Setting” in the Setup menu. ( > 30)

≥ You can redo these settings individually using “Network

Settings”. ( > 30)

≥ Do not use this unit to connect to any wireless network for which you do not have usage rights.

During automatic searches in a wireless network environment, wireless networks (SSID) for which you do not have usage rights may be displayed; however, using these networks may be regarded as illegal access.

≥ After performing network settings on this unit, the settings

(encryption level, etc.) of the wireless router might change.

When you have trouble getting online on your PC, perform the network settings on your PC in accordance with the settings of the wireless router.

≥ Please be aware that connecting to a network without encryption may result in the content of the communication being illegitimately viewed by a third party, or the leaking of data such as personal or secret information.

*1

*2

An SSID (Service Set IDentification) is a name used by wireless LAN to identify a particular network. Transmission is possible if the SSID matches for both devices.

The wireless router compatible with Wi-Fi Protected

Setup TM may have the mark.

Firmware updates

Occasionally, Panasonic may release updated firmware for this unit that may add or improve the way a feature operates. These updates are available free of charge.

This unit is capable of checking the firmware automatically when connected to the Internet via a broadband connection.

When a new firmware version is available, the following message is displayed.

New firmware is available.

Please update firmware in Setup.

To update the firmware

Press [HOME] > select “Setup” > [OK] > select “Player Settings” > select “System” >

[OK] > select “Firmware Update” > [OK] > select “Update Now” > [OK]

DO NOT DISCONNECT the unit from the AC power or perform any operation while the update takes place.

After the firmware is installed, “FINISH” will be displayed on the unit’s display. Unit will restart and the following screen will be displayed.

The firmware has been updated.

Current Version: x.xx

≥ If downloading on this unit fails or this unit is not connected to the Internet, then you can download the latest firmware from the following website and burn it to a CD-R to update the firmware.

http://panasonic.jp/support/global/cs/

(This site is in English only.)

To show the firmware version on this unit. ( > 32,

“Firmware Version Information”)

≥ Downloading will require several minutes. It may take longer or may not work properly depending on the connection environment.

≥ If you do not want to check for the latest firmware version, set “Automatic Update Check” to “Off”. ( > 32)

VQT3V64 13

DMP-BDT220GNGCGAGW-VQT3V64.book 14 ページ 2012年2月6日 月曜日 午前9時52分

STEP 6 : Reprogramming the remote control

For other Panasonic products

If you have more than one Panasonic player/ recorder and the remote control operates both products at once, you will need to change the remote control code to prevent this occurrence.

( > 32, “Remote Control”)

For TV

You can operate the TV using the unit’s remote control.

1

Input the 2-digit code ( > 39) while pressing [ Í TV].

e.g., 01: [0] B [1]

2

Test by turning on the television.

≥ If your television brand has more than one code listed, select the one that allows correct operation.

14 VQT3V64

DMP-BDT220GNGCGAGW-VQT3V64.book 15 ページ 2012年2月6日 月曜日 午前9時52分

Playback

Inserting or removing media

HOME menu

Major functions of this unit can be operated from the HOME menu.

Preparation

Turn on the television and select the appropriate video input on the television.

1

Press [ Í ] to turn on the unit.

2

Press [OK] or [ 3 , 4 , 2 , 1 ] to select the item.

≥ If there are any other items, repeat this step.

Notes

≥ When inserting a media item, ensure that it is facing the right way up.

≥ When removing the SD card, press the centre of the card and pull it straight out.

≥ If you connect a Panasonic product with a USB connection cable, the setup screen may be displayed on the connected equipment. For details, refer to the instructions for the connected equipment.

≥ Use the front USB port when you connect a

USB memory or a USB HDD. The USB port on the rear panel is only for the Communication

Camera.

CAUTION

Do not place objects in front of the unit. The disc tray may collide with objects when it is opened, and this may cause malfunction.

HOME

Blu-ray Disc Player

Photos

Register

1st user

Network

Setup

Videos

Music

Videos/Photos/Music

Disc

SD Card

USB

Play back the contents.

( > 17)

≥ When multiple contents are recorded, select the types of contents or the title.

Network

Network

Service

Home Network

Displays the Home screen of

VIERA Connect. ( > 20)

DLNA Client ( > 21)

Media Renderer ( > 22)

Setup

Player Settings ( > 27)

SD Card

Management

( > 18)

Wallpaper

Changes the background of

HOME menu.

To show the HOME menu

Press [HOME].

≥ Items to be displayed may vary with the media.

VQT3V64 15

DMP-BDT220GNGCGAGW-VQT3V64.book 16 ページ 2012年2月6日 月曜日 午前9時52分

Multi User Mode

Multi User Mode is a function that enables switching of multiple settings easily.

Up to 4 people can use the unit with their own settings.

The following settings can be personalized.

≥ The user icon

≥ The wallpaper of HOME menu

≥ The audio and picture settings ( > 24, 27)

A

HOME

User 1

Blu-ray Disc Player

Network

Photos Setup Music

Videos

B

User 1 Register

2nd user

A The user name and icon currently selected

B Personalize a new user and switch the users with coloured buttons.

Personalizing a new user

1

Press [HOME].

2

Press a coloured button that indicates new user personalization.

3

Select an item and change the settings according to the indications.

The following items can be set.

Input

Nickname

Personalize a user name.

Select Icon

Select

Wallpaper

Personalize a user icon.

Select from Illustrations

The image can be selected from prepared illustrations.

Create from Photos

If the Communication Camera is connected, you can shoot and personalize your photo.

≥ You can also select a photo in recording media as an icon.

( > 24, “Icon Registration”)

Personalize a background of the

HOME menu.

≥ Other than prepared wallpapers, you can also select a photo in recording media as a wallpaper. ( > 24, “Wallpaper”)

16 VQT3V64

Register

Smartphone

Smartphone used as a remote control can be registered with respect to each user.

≥ Multiple users cannot be registered for one smartphone.

4

Select “Confirm” and press [OK].

To change the personalized user information

Select “Edit User Information” from Setup menu.

( > 32)

Switching the user

There are three ways to switch the user as follows.

Using coloured buttons

Press the coloured buttons in the HOME menu to switch to the user corresponding to the button.

Using facial recognition

(Only when connected to Communication

Camera > 20)

This is a function for fun using the Communication

Camera and enables user switching by facial recognition. Perform “Create from Photos” ( > left) to personalize your facial photo before using this function.

1

Press [OPTION] in the HOME menu, select

“Facial Recognition” and press [OK].

2

Turn the face to Communication Camera.

The camera captures your face and determines the closest face from the personalized user photos, and then displays the results.

≥ Accuracy of the recognition may be reduced depending on the captured image.

3

Follow the indications on the screen.

≥ To redo the facial recognition, press

[RETURN].

Using registered smartphones

When the unit is turned on using the registered smartphone, the user who registered the smartphone will automatically be selected.

≥ Perform the “Remote Device Settings”. ( > 30)

≥ To use smartphones as a remote control, installation of dedicated software is required. For more details, refer to the following website.

http://panasonic.jp/support/global/cs/

(This site is in English only.)

DMP-BDT220GNGCGAGW-VQT3V64.book 17 ページ 2012年2月6日 月曜日 午前9時52分

Playback

1

Insert the media.

Playback starts depending on the media.

2

Select the item to play and press [OK].

Repeat this procedure if necessary.

≥ Signal from PAL discs is output as PAL. Signal from NTSC discs is output as “NTSC” or “PAL60”. You can select

“NTSC” or “PAL60” in “NTSC Contents Output” for NTSC discs. ( > 27)

≥ DISCS CONTINUE TO ROTATE WHILE MENUS ARE

DISPLAYED. Press [ ∫ STOP] when you have finished playback to protect the unit’s motor, your television screen and so on.

≥ DivX and MKV: Successive play is not possible.

≥ It is not possible to play back AVCHD and MPEG2 video which have been dragged and dropped, copied and pasted to the media.

≥ To save on electricity, the unit is turned off automatically if there is no button operation for about 30 minutes when not playing back (such as when paused, displaying the menu, displaying still pictures, etc.).

Operations during playback

Following functions may not work depending on the media and contents.

Stop

Press [ ∫ STOP].

The stopped position is memorized.

Resume play function

Press [ 1 PLAY] to restart from this position.

≥ The position is cleared if the tray is opened or you press [ ∫ STOP] several times to display

“STOP” on the unit’s display.

≥ On BD-Video discs including BD-J, the resume play function does not work.

Pause

Press [ ; PAUSE].

≥ Press [ ; PAUSE] again or [ 1 PLAY] to restart play.

Search/Slow-motion

Search

While playing, press [SEARCH 6 ] or

[SEARCH 5 ].

≥ Music and MP3: The speed is fixed to a single step.

Slow-motion

While paused, press [SEARCH 6 ] or

[SEARCH 5 ].

≥ BD-Video and AVCHD: [SEARCH 5 ] only.

The speed increases up to 5 steps.

≥ Press [ 1 PLAY] to revert to normal playback speed.

Skip

While playing or paused, press [ : ] or

[ 9 ].

Skip to the title, chapter or track.

Frame-by-frame

While paused, press [ 2 ] ( 2; ) or [ 1 ] ( ;1 ).

≥ Press and hold to change in succession forward or backward.

≥ Press [ 1 PLAY] to revert to normal playback speed.

≥ BD-Video and AVCHD: [ 1 ] ( ;1 ) only.

Changing audio

Press [AUDIO].

You can change the audio channel number or soundtrack language, etc.

VQT3V64 17

DMP-BDT220GNGCGAGW-VQT3V64.book 18 ページ 2012年2月6日 月曜日 午前9時52分

Displaying menus and playback information

Show top menu/pop-up menu

Press [TOP MENU] or [POP-UP MENU].

Select the item and press [OK].

Show the status messages

While playing, press [STATUS].

The status messages give you information about what is currently being played. Each time you press [STATUS], the display information may change or will disappear from the screen.

≥ Depending on media and contents, the display may change or may not appear.

e.g., BD-Video

Enjoying 3D video and photos

Preparation

Connect 3D compatible TV to an HDMI AV OUT terminal of this unit using a High Speed HDMI

Cable. ( > 9, 10)

≥ Perform the necessary preparations for the TV.

≥ Play back following the instructions displayed on the screen.

≥ 3D Settings ( > 26, 29)

≥ Please refrain from viewing 3D images if you do not feel well or are experiencing visual fatigue.

In the event that you experience dizziness, nausea, or other discomfort while viewing 3D images, discontinue use and rest your eyes.

≥ 3D video might not output the way it is set in “HDMI Video

Format” or “24p Output” ( > 27).

≥ When playing back 3D photos from “Photos” screen, select from the “3D” list. (Still pictures in “2D” are played back in

2D.)

If “2D” and “3D” indications are not displayed, press the red button to switch the view of playback contents.

BD-Video

Play

A T: Title, C: Chapter, PL: Playlist

B Elapsed time in the title

C Current position

D Total time e.g., JPEG

Date 11.12.2007

Size 500 x 375

Manufacturer

Equipment

Enjoying BD-Live

With “ BD-Live ” discs, you can enjoy bonus contents that use Internet access.

For this BD-Live function, insertion of an SD card is necessary along with Internet connection.

1

Perform network connection and settings.

( > 11, 12)

2

Insert an SD card with 1 GB or more free space.

≥ The SD card is used as the local storage.

3

Insert the disc.

Deleting data/Formatting SD cards

Select “SD Card Management” in the HOME menu ( > 15), then select “BD-Video Data

Erase” or “Format SD Card” and press [OK].

≥ The usable functions and the operating method may vary with each disc, please refer to the instructions on the disc and/or visit their website.

≥ “BD-Live Internet Access” may need to be changed for certain discs ( > 31).

18 VQT3V64

DMP-BDT220GNGCGAGW-VQT3V64.book 19 ページ 2012年2月6日 月曜日 午前9時52分

Slideshow

Play a slideshow of photos and make various settings during the playback.

1

Insert the media.

2

Select “Photos”.

3

Select an item and press the green button.

The following items can be set.

Start

Slideshow

Interval

Transition

Effect

Repeat Play

Soundtrack

Soundtrack

Folder

Random

Soundtrack

Start the slideshow.

You can display still pictures in the selected folder one by one at a constant interval.

Change the display interval.

Select the effect when sliding pictures.

Set whether to repeat the slideshow.

Set whether to play background music.

≥ FLAC, MP3 and WAV on the

USB device can be played back during the slideshow of

JPEG on the USB device or the SD card.

≥ A music CD can also be played back during the slideshow of JPEG on the

SD card.

Select the folder from which the music files are played.

Background music is played in random order.

≥ Still pictures displayed as “ ” cannot be played back with this unit.

≥ When both the music CD and the USB device with recorded music are inserted into this unit, the music CD has priority to be played back as background music.

VQT3V64 19

DMP-BDT220GNGCGAGW-VQT3V64.book 20 ページ 2012年2月6日 月曜日 午前9時52分

VIERA Connect (Enjoying

Internet Service)

VIERA Connect allows you to access some specific websites supported by Panasonic, and enjoy Internet contents such as photos, videos, etc. from VIERA Connect home screen. This unit has no full browser function and all features of websites may not be available.

1

Press [INTERNET].

≥ The video communication service can be accessed directly by pressing [ ] button.

2

Select the item and press [OK].

VIERA Connect provides a variety of selected Internet services such as the following.

Online movie rental service

Video communication service

Video browsing service

XXX  XXXX  XXXXXXXX  XXX

XXXX

MORE

BACK

XXXXXXXXXXXXXXXX

*

Internet

* Images are for illustration purposes, contents may change without notice.

Preparation

≥ Network connection ( > 11)

≥ Network setting ( > 12)

To enjoy video communication (ex. Skype TM ) :

≥ Connect this unit with optional Communication

Camera (TY-CC20W or TY-CC10W).

Depending on your location, this optional camera may not be available. Please consult your local Panasonic dealer for advice.

To exit from VIERA Connect

Press [EXIT], [HOME] or [TOP MENU].

≥ When playing content in the media, VIERA Connect cannot be accessed by pressing [INTERNET].

≥ In the following cases, settings are possible using the

Setup menu items.

– When restricting the use of VIERA Connect

( > 31, “Network Service Lock”)

– When the audio is distorted

( > 30, “Audio Auto Gain Control”)

– When wrong time is displayed

( > 30, “Time Zone”, “Summer Time”)

≥ If using slow Internet connection, the video may not be displayed correctly. A high-speed Internet service with a speed of at least 6 Mbps is recommended.

≥ Be sure to update the firmware when a firmware update notice is displayed on the screen. If the firmware is not updated, you will not be able to use the VIERA Connect function. ( > 13)

≥ VIERA Connect Home screen is subject to change without notice.

≥ The services through VIERA Connect are operated by their respective service providers, and service may be discontinued either temporarily or permanently without notice. Therefore, Panasonic will make no warranty for the content or the continuity of the services.

≥ All features of websites or content of the service may not be available.

≥ Some content may be inappropriate for some viewers.

≥ Some content may only be available for specific countries and may be presented in specific languages.

Communication Camera

TY-CC20W or TY-CC10W

≥ For operating method refer to the following website.

http://panasonic.jp/support/global/cs/

(This site is in English only.)

20 VQT3V64

DMP-BDT220GNGCGAGW-VQT3V64.book 21 ページ 2012年2月6日 月曜日 午前9時52分

Home Network feature

Playing back contents on the

DLNA server

You can share photos, videos and music stored in the DLNA Certified media server (PC with

Windows 7 installed, smartphone, etc.) connected to your home network, and enjoy the contents with this player.

You can also enjoy viewing the video and photos recorded in Panasonic DLNA compatible recorders (DIGA).

Refer to our website about the sales area, etc.

( > 22)

1

Press [HOME].

2

Select “Network”.

3

Select “Home Network”.

4

Select “DLNA Client”.

≥ The list can be updated by pressing the red button on the remote control.

≥ The connection method can be switched to

Wi-Fi Direct by pressing the green button on the remote control.

5

Select the equipment and press [OK].

6

Select the item to play and press [OK].

≥ You may be able to use convenient functions depending on the content by pressing [OPTION].

≥ Control Panel ( > 25) is displayed once the playback starts. Press [OK] if the Control

Panel is not displayed, and press

[RETURN] to hide the Control Panel.

Player

Server

Preparation

1 Perform network connection ( > 11) and network settings ( > 12) of this unit.

2 Perform Home Network settings of the connected equipment.

When connected to other than DIGA,

3 Add the contents and folder to the libraries of the Windows Media ® Player or the smartphone, etc.

≥ Playlist of Windows Media ® Player can play back only the contents that are stored in the libraries.

When connected to DIGA,

3 Register this unit to your DIGA.

To exit from Home Network

Press [EXIT], [HOME] or [TOP MENU].

VQT3V64 21

DMP-BDT220GNGCGAGW-VQT3V64.book 22 ページ 2012年2月6日 月曜日 午前9時52分

Using the Digital Media Controller

You can use the smartphone, etc. as the Digital

Media Controller (DMC) to play back contents from DLNA server on the Renderer (this unit).

Possible applications:

Renderer

Server

*

To exit from Media Renderer screen

Press [HOME].

For more details, refer to the following website and the operating instructions for each of the equipment.

http://panasonic.jp/support/global/cs/

(This site is in English only.)

≥ Wi-Fi Direct connection while using Home Network feature is only temporary, and the network connection method returns to the original setting when exiting.

≥ Depending on the contents and the connected equipment, playback may not be possible.

≥ Items displayed in grey on the display cannot be played back by this unit.

≥ This unit can be played back via connected equipment only when controlled using DMC.

*

Controller

Server i

Controller

*

Renderer

* DMC compatible software should be installed.

Preparation

Perform steps 1 and 2 . ( > 21)

3 Add the contents and folder to the libraries of the Windows Media ® Player or the smartphone, etc.

≥ Playlist of Windows Media ® Player can play back only the contents that are stored in the libraries.

4 Perform the “Remote Device Settings”.

( > 30)

≥ You can register up to 16 devices.

1

Press [HOME].

2

Select “Network”.

3

Select “Home Network”.

4

Select “Media Renderer”.

5

Select “Home Network” or “Wi-Fi Direct” and press [OK], then follow the indications on the screen.

6

Operate the DMC compatible devices.

22 VQT3V64

DMP-BDT220GNGCGAGW-VQT3V64.book 23 ページ 2012年2月6日 月曜日 午前9時52分

VIERA Link

“HDAVI Control™”

What is VIERA Link “HDAVI Control”?

VIERA Link “HDAVI Control” is a convenient function which will link the operations of this unit and a Panasonic

TV (VIERA) or other device under

“HDAVI Control”.

You can use this function by connecting the equipment with an HDMI cable. See the operating instructions for connected equipment for operational details.

Power off link

All connected equipment compatible with

“HDAVI Control”, including this unit, automatically turns off when you switch the television off.

Playing music continuously even after turning off the television

When the unit is connected to a Panasonic TV

(VIERA) that supports HDAVI Control 2 or later and an amplifier/receiver supports VIERA Link.

1 While playing music

Press [OPTION].

2 Select “TV Power” and press [OK].

Preparation

1 Set “VIERA Link” to “On” ( > 32).

(The default setting is “On”.)

2 Set the “HDAVI Control” operations on the connected equipment (e.g., TV).

3 Turn on all “HDAVI Control” compatible equipment and select this unit’s input channel on the connected TV so that the

“HDAVI Control” function works properly.

Also when the connection or settings are changed, repeat this procedure.

Automatic input switching

Power on link

When the following operations are performed, the input channel of the television will be automatically switched and the screen of this unit will be displayed.

When the television is off, the television will automatically turn on.

– When play starts on the unit

– When an action that uses the display screen is performed

(e.g., HOME menu)

Easy control only with VIERA remote control

Only when TV supports “HDAVI Control 2” or later

By using the TV remote control, you can perform various playback operations and settings.

See the operating instructions of the TV for more details.

≥ The buttons that you can use for this unit vary depending on the TV. For details, refer to the operating instructions of the TV.

≥ The operation of this unit may be interrupted when you press certain buttons on the TV remote control.

≥ This unit supports “HDAVI Control 5” function.

“HDAVI Control 5” is the newest standard (current as of

November, 2011) for Panasonic’s HDAVI Control compatible equipment. This standard is compatible with

Panasonic’s conventional HDAVI equipment.

≥ VIERA Link “HDAVI Control”, based on the control functions provided by HDMI which is an industry standard known as HDMI CEC (Consumer Electronics Control), is a unique function that we have developed and added. As such, its operation with other manufacturers’ equipment that supports HDMI CEC cannot be guaranteed.

≥ Please refer to individual manuals for other manufacturers’ equipment supporting VIERA Link function.

VQT3V64 23

DMP-BDT220GNGCGAGW-VQT3V64.book 24 ページ 2012年2月6日 月曜日 午前9時52分

Settings

Option menu

A variety of playback operations and settings can be performed from this menu.

Available options differ depending on the playing contents and the condition of the unit.

About Multi User Mode

: Settings of the items with this indication are saved by the respective users registered in the

HOME menu.

Please refer to page 16 for details about user registration and switching.

1

Press [OPTION].

≥ When playing music, select “Playback

Settings” and press [OK].

e.g., BD-Video

Operation Menu

Soundtrack

Subtitle

Angle

Repeat Play

Status

Primary Video

Secondary Video

Control Panel

Top Menu

Pop-up Menu

Off

2

Select an item and change the settings.

To exit the screen

Press [OPTION].

Regarding Language : ( > 39)

Operation Menu

∫ Soundtrack

Show or change the soundtrack.

∫ Audio channel

Select the audio channel number.

∫ Subtitle

Change the subtitle settings.

∫ Angle

Select the number of the angle.

∫ Repeat Play

(Only when the elapsed time is being displayed on the unit’s display.)

Select the item that you want to repeat.

≥ The items displayed differ depending on the type of media.

≥ Select “Off” to cancel.

∫ Random

Select whether or not to play random.

∫ Start Slideshow

Start the slideshow.

∫ Status

Show the status messages.

∫ Rotate RIGHT

∫ Rotate LEFT

Rotate the still picture.

∫ Wallpaper

Set the still picture to the wallpaper of HOME menu.

( > 15)

∫ Icon Registration

Set the still picture as your user icon. ( > 16)

∫ Video

The recording method of original video appears.

∫ Primary Video

The recording method of original primary video appears.

∫ Secondary Video

Video

Soundtrack

Select on/off of images. The recording method of original video appears.

≥ During search/slow-motion or frame-by-frame, only the primary video is displayed.

Select on/off of audio and the language.

24 VQT3V64

DMP-BDT220GNGCGAGW-VQT3V64.book 25 ページ 2012年2月6日 月曜日 午前9時52分

∫ Control Panel

Display the Control Panel.

Playing back while using VIERA Link, etc.

e.g.,

Personal Taste

You can access settings to enjoy special features of this unit from this category.

Refer to “Picture Settings” and “Sound Settings”

( > 26) for more details on each setting item.

Picture Settings

EXIT

Press [RETURN] to hide the Control Panel.

∫ Top Menu

Display Top Menu.

∫ Pop-up Menu

Display Pop-up Menu.

∫ Menu

Display Menu.

∫ Picture Mode

Select the picture quality mode during play.

≥ If you select “User”, you can change settings in

“Picture Adjustment”.

∫ Picture Adjustment

Specific picture quality settings can be performed.

≥ 3D NR:

Reduces the rough noise in the background to give a greater feeling of depth.

When “24p Output” is set to “On”, this function may not operate. ( > 27)

≥ Integrated NR:

Smoothes block noise and reduces the smudging that appears around contrasting sections of the picture.

∫ Chroma Process

The high-resolution processing of HDMI chroma signals produces a high-resolution picture with rich picture quality.

∫ Detail Clarity

The picture is sharp and detailed.

∫ Super Resolution

Pictures of normal image quality are corrected to sharp and detailed images when output as 1080i/

1080p from HDMI AV OUT.

∫ Progressive

Select the method of conversion for progressive output to suit the type of material being played.

≥ If the video is disrupted when “Auto” is selected, select either “Video” or “Film” depending on the material to be played back.

∫ 24p

Movies and other material recorded on

DVD-Video at 24p are output at 24p.

≥ Only when you have selected “On” in “24p

Output” ( > 27) and play discs recorded at a rate of 60 fields per second.

≥ This may not work with the PAL contents.

∫ Screen Aspect

Switch the screen mode.

∫ Reset to Default Picture Settings

Return picture settings to the factory preset.

VQT3V64 25

DMP-BDT220GNGCGAGW-VQT3V64.book 26 ページ 2012年2月6日 月曜日 午前9時52分

Sound Settings

∫ Sound Effects *1, *2

Select the sound effect.

≥ Night Surround :

Enjoy a movie with powerful sound even when the volume is kept low at night. The audio is set in such a way that it can be heard easily.

≥ Re-master :

This feature gives you brighter sound by increasing the high frequency portion of the audio. (Discs recorded at 48 kHz or less)

Recommended setting

Re-master 1

Re-master 2

Re-master 3

Pop and rock

Jazz

Classical

∫ Dialogue Enhancer *2

The volume of the centre channel is raised to make dialog easier to hear.

*1

*2

Not every function can be set individually.

This function is effective for audio from the HDMI terminal or the OPTICAL terminal only when “Digital Audio Output” is set to “PCM” ( > 28). (However, in this case, audio is output as 2ch from the OPTICAL terminal.)

3D Settings

These settings are also displayed by pressing

[ ].

∫ Signal Format

Original

Side by side

2D to 3D

Keep original picture format.

3D picture format comprising of left and right screens.

Converts 2D pictures to 3D effect.

∫ 3D Picture Mode

Normal

Soft

Manual

Play back pictures with normal

3D effects.

You can enjoy 3D pictures with a feeling of broadness, holding back the depth perception.

Play back 3D pictures with settings of “Manual Settings”.

∫ Manual Settings

Distance

Screen Type

Frame Width

Frame Colour

Set the amount of depth perception.

Selects how the screen appears during 3D playback

(flat or round).

Set the amount of feathering at the edge of screen.

Set the colour of feathering at the edge of screen.

∫ Graphic Display Level

(Only when “Full HD” is selected in “3D Type”

( > 29).)

3D position for the Option menu or message screen, etc. can be adjusted during 3D playback.

26 VQT3V64

DMP-BDT220GNGCGAGW-VQT3V64.book 27 ページ 2012年2月6日 月曜日 午前9時52分

Setup menu

Change the unit’s settings if necessary. The settings remain intact even if you switch the unit to standby.

Some items in the Setup menu are common to the Option menu. You can get the same effect with both menus.

About Multi User Mode

: Settings of the items with this indication are saved by the respective users registered in the

HOME menu.

Please refer to page 16 for details about user registration and switching.

1

Press [HOME].

2

Press [OK] to select “Setup”.

3

Select “Player Settings”.

Player Settings

Picture

Sound

3D

Language

Network

Ratings

System

Picture Mode

Picture Adjustment

Chroma Process

Detail Clarity

Super Resolution

HDMI Output

NTSC Contents Output

Still Mode

Seamless Play

Normal

Advanced

Automatic

On

4

Select an item and change the settings.

To exit the screen

Press [HOME].

Picture

∫ Picture Mode ( > 25)

∫ Picture Adjustment ( > 25)

∫ Chroma Process ( > 25)

∫ Detail Clarity ( > 25)

∫ Super Resolution ( > 25)

∫ HDMI Output

Press [OK] to show the following settings:

¾ HDMI Video Format

The items supported by the connected devices are indicated on the screen as “ ¢ ”. When any item without “ ¢ ” is selected, the images may be distorted.

≥ If “Automatic” is selected, the best suited output resolution to the connected television is automatically selected.

≥ To enjoy high-definition video up-converted to

1080p, you need to connect the unit directly to 1080p compatible HDTV (High Definition

Television). If this unit is connected to an

HDTV through other equipment, the other equipment must also be 1080p compatible.

¾ 24p Output

When this unit is connected to a TV supporting

1080/24p output using an HDMI cable, movies and other material recorded at 24p are output at

24p.

≥ When playing DVD-Video, set to “On” and then set “24p” in “Picture Settings” ( > 25) to

“On”.

≥ When BD-Video images other than 24p are played, images are output at 60p.

≥ 24p : A progressive image recorded at a rate of 24 frames per second (motion-picture film).

Many BD-Video movie contents are recorded in 24 frames/second in accordance with the film materials.

¾ HDMI Colour Mode

This setting is for selecting colour-space conversion of the image signal when the unit is connected using an HDMI cable.

¾ Deep Colour Output

This setting is for selecting whether to use Deep

Colour output when a television that supports

Deep Colour is connected.

¾ Contents Type Flag

Depending on the playback content, the TV will output adjusting to the optimal method when a

TV that supports this function is connected.

∫ NTSC Contents Output

(This works only for video output from the VIDEO

OUT terminal.)

Select PAL60 or NTSC output when playing

NTSC discs.

VQT3V64 27

DMP-BDT220GNGCGAGW-VQT3V64.book 28 ページ 2012年2月6日 月曜日 午前9時52分

∫ Still Mode

Select the type of picture shown when you pause playback.

Automatic

Field

Frame

Automatically selects the type of picture shown.

Select if jittering occurs when

“Automatic” is selected.

Select if small text or fine patterns cannot be seen clearly when “Automatic” is selected.

∫ Seamless Play

The chapter segments in playlists are played seamlessly.

≥ Select “On”, when the picture freezes for a moment at the chapters segment in playlists.

Sound

∫ Sound Effects ( > 26)

∫ Dialogue Enhancer ( > 26)

∫ Dynamic Range Compression

You can listen at low volumes but still hear dialog clearly.

(Dolby Digital, Dolby Digital Plus and Dolby

TrueHD only)

≥ “Automatic” is effective only when playing Dolby

TrueHD.

∫ Digital Audio Output

Press [OK] to show the following settings:

¾ Dolby D/Dolby D +/Dolby TrueHD

¾ DTS/DTS-HD

¾ MPEG Audio

Select the audio signal to output.

≥ Select “PCM”, when the connected equipment cannot decode the respective audio format. This unit decodes the audio format and transmits to the connected equipment.

≥ Not making the proper settings may result in noise.

¾ BD-Video Secondary Audio

Select whether or not to mix the primary and secondary audio (including the button click sound).

If “Off” is selected, the unit outputs the primary audio only.

¾ HDMI Audio Output

This setting selects whether or not to output audio from HDMI.

≥ Select “Off” when the TV is connected to this unit via an HDMI terminal, and this unit is also connected to other devices, such as an amplifier/receiver via an OPTICAL terminal.

∫ PCM Down Conversion

Select how to output audio with a sampling frequency of 96 kHz for the PCM output from the

DIGITAL AUDIO OUT.

≥ If “On” is selected, the signals that are converted to 48 kHz are output.

≥ If “Off” is selected, and the connected equipment does not support 96 kHz, the sound will not be output normally.

≥ Signals are converted to 48 kHz despite the settings in the following cases:

– when the signals have a sampling frequency of 192 kHz

– when the disc has copy protection

– when “BD-Video Secondary Audio” is set to

“On”

∫ Downmix

Select the downmix system of multi-channel to

2-channel sound.

≥ Select “Surround encoded”, when the connected equipment supports the virtual surround function.

≥ There is no effect on “Bitstream” via HDMI AV

OUT and DIGITAL AUDIO OUT.

≥ The audio will be output in “Stereo” in the following cases:

– AVCHD playback

– Playback of secondary audio (including the button click sound).

28 VQT3V64

DMP-BDT220GNGCGAGW-VQT3V64.book 29 ページ 2012年2月6日 月曜日 午前9時52分

∫ Audio Delay

Synchronization between picture and sound is corrected by adjusting the delay time of the audio output.

3D

∫ 3D BD-Video Playback

Select the playback method of 3D compatible video software.

∫ 3D AVCHD Output

Select the output method of 3D AVCHD videos.

∫ 3D Type

Select the format of the connected TV.

≥ Change the settings for 3D on the TV also when “Side by side” is selected.

∫ 3D Playback Message

Set to display or hide the 3D viewing warning screen when playing back the 3D compatible video software.

∫ Manual Settings ( > 26)

∫ Graphic Display Level ( > 26)

Language

∫ Soundtrack Preference

Choose the language for audio.

≥ If “Original” is selected, the original language of each disc will be selected.

≥ Enter a code ( > 39) when you select “Other

¢¢¢¢ ”.

∫ Subtitle Preference

Choose the language for the subtitle.

≥ If “Automatic” is selected and the language selected for “Soundtrack Preference” is not available, subtitles of that language will automatically appear if available on that disc.

≥ Enter a code ( > 39) when you select “Other

¢¢¢¢ ”.

∫ Menu Preference

Choose the language for the disc menus.

≥ Enter a code ( > 39) when you select “Other

¢¢¢¢ ”.

[Except[South[East[Asia]

∫ Subtitle Text

Select a suitable item according to the language used for DivX or MKV subtitles text.

≥ This item is displayed only after playing back a file.

[For[South[East[Asia]

∫ On-Screen Language

Choose the language for menus and on-screen messages.

VQT3V64 29

DMP-BDT220GNGCGAGW-VQT3V64.book 30 ページ 2012年2月6日 月曜日 午前9時52分

Network

∫ Easy Network Setting ( > 12)

∫ Network Settings

Perform network-related settings individually.

Press [OK] to show the following settings:

¾ LAN Connection Mode

Select the LAN connection method.

≥ Select “Wireless Master” when you make a direct wireless connection between this unit and a Home Network device. Internet connection is not available when this item is selected.

¾ Wireless Settings

This allows the wireless router and connection settings to be set. Current connection settings and connection state can be checked.

Connection Setting

The wireless router connection wizard will be displayed.

Double Speed Mode Setting (2.4GHz)

When a 2.4 GHz wireless format is used, this sets the connection speed.

≥ If you connect using the “Double Speed

Mode (40MHz)”, 2 channels use the same frequency band, and there is consequently a greater risk of reception interference. This can cause the connection speed to drop or become unstable.

¾ IP Address / DNS Settings

This is for checking the state of the network connection and setting the IP address and

DNS-related.

Press [OK] to show the respective setting.

¾ Proxy Server Settings

This is for checking the state of connection with the Proxy server and performing settings.

Press [OK] to show the respective setting.

¾ Network Service Settings ( > 20)

(VIERA Connect)

Press [OK] to show the following settings:

Audio Auto Gain Control

Volume that is different depending on the contents is adjusted automatically to the standard volume while using the VIERA

Connect.

≥ Depending on contents, this function effect will not work.

≥ Select “Off” when the audio is warped.

Time Zone

By selecting the time zone, it is possible to set the unit’s time to match your location.

≥ Some VIERA Connect contents require the time zone to be set. Set the time zone if necessary.

Summer Time

Select “On” when using Daylight Saving time.

[Except[South[East[Asia]

¾ Network Drive Connection

It is possible to access the shared folder of equipment not compatible with DLNA, such as the Windows XP operating system, and play back video, still pictures, and music on this unit.

For the setting and operation method of connected equipment, refer to the following

Website.

http://panasonic.jp/support/global/cs/

(This site is in English only.)

¾ Remote Device Settings ( > 22)

Press [OK] to show the following settings:

Remote Device Operation

Enable to operate by DMC.

≥ If “On” is selected, “Quick Start” is fixed to

“On”.

Device Name Entry

Set the name of this unit to be displayed on the connected equipment.

30 VQT3V64

DMP-BDT220GNGCGAGW-VQT3V64.book 31 ページ 2012年2月6日 月曜日 午前9時52分

Registration Type

Automatic

Manual

Allow connection to all the equipment that is accessing this unit.

Set the permission of the connection individually for the equipment that is accessing this unit.

Remote Device List

Registering/deregistering of the displayed equipment can be performed when “Manual” in “Registration Type” is selected.

¾ BD-Live Internet Access ( > 18)

You can restrict Internet access when BD-Live functions are used.

≥ If “Limit” is selected, Internet access is permitted only for BD-Live contents which have content owner certificates.

Ratings

The following items use the same password.

Don’t forget your password.

∫ DVD-Video Ratings

Set a ratings level to limit DVD-Video play.

∫ BD-Video Ratings

Set an age limit of BD-Video play.

∫ Network Service Lock

You can restrict the usage of VIERA Connect.

System

∫ Easy Setting

You can execute basic settings.

∫ TV Settings

Press [OK] to show the following settings:

¾ TV Aspect

Set to match the type of television connected.

When connected to a 4:3 aspect television and playing 16:9 ratio image:

4:3 Pan & Scan

4:3 Letterbox

The sides are cut off so the picture fills the screen.

When playing BD-Video, video is output as “4:3

Letterbox”.

Black bands appear at the top and bottom of the picture.

When connected to a 16:9 widescreen television and playing 4:3 ratio image:

16:9

16:9 full

Video is displayed as a 4:3 ratio image in the centre of the screen.

Video is displayed as a horizontally stretched 16:9 image.

¾ TV System

Perform the setup so it matches the TV System of the connected TV.

≥ When NTSC contents are played, they are outputted in the signal format specified in the

“NTSC Contents Output”, irrespective of the settings here. ( > 27)

¾ Screen Saver Function

This is to prevent burn-in on the screen.

≥ When this is set to “On”:

If a list of playback content is displayed and there is no operation for 10 minutes or more, the screen switches to HOME menu automatically.

≥ While playing and pausing, etc., this function is not available.

¾ On-Screen Messages

Choose whether to show status messages automatically.

VQT3V64 31

DMP-BDT220GNGCGAGW-VQT3V64.book 32 ページ 2012年2月6日 月曜日 午前9時52分

¾ VIERA Link

Set to use “HDAVI Control” function when connected via HDMI cable to a device that supports “HDAVI Control”.

≥ Select “Off” when you do not want to use

“HDAVI Control”.

∫ Unit Settings

Press [OK] to show the following settings:

¾ Front Panel Display

Changes the brightness of the unit’s display.

≥ If “Automatic” is selected, the display is set to bright and only dimmed during playback.

¾ Edit User Information

Change the user information registered in the

HOME menu.

∫ Quick Start

Speed of startup from standby mode is increased.

≥ When set to “On”, the internal control unit will be powered and the idle power consumption will increase so compared to when set to “Off”.

(About the power consumption > 40)

∫ Remote Control

Change the remote control code if other

Panasonic products react to this remote control.

∫ Firmware Update ( > 13)

Press [OK] to show the following settings:

¾ Automatic Update Check

When this equipment remains connected to the

Internet, it will check for the latest firmware version when it is turned on and you can update it if necessary.

¾ Update Now

You can update the firmware manually if a firmware update is available.

∫ System Information

Press [OK] to show the following settings:

¾ Software Licence

Information about the software used by this unit is displayed.

¾ Firmware Version Information

Display firmware version of this unit and wireless LAN module.

∫ DivX Registration

You need this registration code to purchase and play DivX Video-on-Demand (VOD) content.

∫ Default Settings

This returns all values in the Setup menu and the

Option menu to the default settings, except for some settings of network, ratings, remote control code, language, etc.

32 VQT3V64

DMP-BDT220GNGCGAGW-VQT3V64.book 33 ページ 2012年2月6日 月曜日 午前9時52分

Reference

Troubleshooting guide

Before requesting service, please perform the following checks.

If the problem remains unresolved, consult your dealer for instructions.

Do you have the latest firmware installed?

Firmware updates may be released to correct operating irregularities that are discovered with certain movies. ( > 13)

The following do not indicate a problem with this unit:

– Regular disc rotating sounds.

– Image disturbance during search.

– Image disturbance when replacing 3D discs.

Unit doesn’t respond to remote control or front panel buttons.

Press and hold [ Í /I] on the main unit for

3 seconds.

– If still unable to turn the unit off, disconnect the

AC mains lead, wait 1 minute, then reconnect the AC mains lead.

Cannot eject disc.

The unit may have a problem.

1 While the unit is off, press and hold [OK], the yellow button and the blue button on the remote control at the same time for more than

5 seconds.

– “00 RET” is displayed on the unit’s display.

2 Repeatedly press [ 1 ] (right) on the remote control or [ Í /I] on the unit until “06 FTO” is displayed on the unit’s display.

3 Press [OK] on the remote control or

[ < OPEN/CLOSE] on the unit.

General operation

To return to the factory preset.

¾ Select “Yes” in “Default Settings” in the Setup menu. ( > 32)

To return all settings to the factory preset.

¾ Reset the unit as follows:

1 While the unit is off, press and hold [OK], the yellow button and the blue button on the remote control at the same time for more than

5 seconds.

– “00 RET” is displayed on the unit’s display.

2 Repeatedly press [ 1 ] (right) on the remote control or [ Í /I] on the unit until “08 FIN” is displayed on the unit’s display.

3 Press and hold [OK] on the remote control or

[ < OPEN/CLOSE] on the unit for at least

3 seconds.

This unit is turned off when the input for the

TV is switched.

¾ This is a normal phenomenon when using

VIERA Link (HDAVI Control 4 or later). For details please read the operating instructions for the TV.

The remote control doesn’t work properly.

¾ Change the batteries in the remote control.

( > 4)

¾ The remote control and main unit are using different codes. If “SET  ” is displayed on the unit’s display when a button is pressed on the remote control, change the code on the remote control. ( > 32, 37)

The TV tuner mode is not displayed when the

TV is switched on.

¾ This phenomenon may occur, depending on the TV setting, when “Quick Start” is set to

“On”.

¾ Depending on the TV, this phenomenon may be prevented by reconnecting the HDMI cable to a different HDMI input terminal or by changing the HDMI auto connection setting.

VQT3V64 33

DMP-BDT220GNGCGAGW-VQT3V64.book 34 ページ 2012年2月6日 月曜日 午前9時52分

You have forgotten your ratings password.

You want to cancel the ratings level.

¾ The ratings level returns to the factory preset.

1 While the unit is on, press and hold [OK], the yellow button and the blue button on the remote control at the same time for more than

5 seconds.

– “00 RET” is displayed on the unit’s display.

2 Repeatedly press [ 1 ] (right) on the remote control or [ Í /I] on the unit until “03 VL” is displayed on the unit’s display.

3 Press [OK] on the remote control or

[ < OPEN/CLOSE] on the unit.

This unit does not recognize the USB connection correctly.

¾ Disconnect and reconnect the USB cable. If it still does not recognize the connection, turn this unit off and on again.

¾ USB devices may not be recognized by this unit when connected using the following :

– a USB hub

– a USB extension cable

¾ If you connect USB HDD to this unit, use the

USB cable that is supplied with the HDD.

¾ The unit and television are using different video systems.

1 While the unit is on, press and hold [OK], the yellow button and the blue button on the remote control at the same time for more than

5 seconds.

– “00 RET” is displayed on the unit’s display.

2 Repeatedly press [ 1 ] (right) on the remote control or [ Í /I] on the unit until “05 P/N” is displayed on the unit’s display.

3 Press and hold [OK] on the remote control or

[ < OPEN/CLOSE] on the unit for at least

3 seconds.

The system switches from PAL to NTSC or vice versa.

¾ The system used on the disc doesn’t match your television.

– PAL discs cannot be correctly viewed on an

NTSC television.

– This unit can convert NTSC signals to

PAL60 for viewing on a PAL television

( > 27, “NTSC Contents Output”).

¾ When “3D BD-Video Playback” in the Setup menu is set to “Automatic”, images may not be output depending on the connection method. After removing the disc from this unit, select “Set before play” in the Setup menu, and select “2D Playback” in the setup screen displayed when playing 3D discs. ( > 29)

Picture

The images from this unit do not appear on the television.

Picture is distorted.

¾ An incorrect resolution is selected in “HDMI

Video Format”. Reset the setting as follows:

1 While the unit is on, press and hold [OK], the yellow button and the blue button on the remote control at the same time for more than

5 seconds.

– “00 RET” is displayed on the unit’s display.

2 Repeatedly press [ 1 ] (right) on the remote control or [ Í /I] on the unit until “04 PRG” is displayed on the unit’s display.

3 Press and hold [OK] on the remote control or

[ < OPEN/CLOSE] on the unit for at least

3 seconds.

Set the item again. ( > 27)

– When Dolby Digital Plus, Dolby TrueHD, and DTS-HD audio are not output in bitstream, select “Yes” in “Default Settings” and make proper settings. ( > 32)

34 VQT3V64

DMP-BDT220GNGCGAGW-VQT3V64.book 35 ページ 2012年2月6日 月曜日 午前9時52分

Video is not output in high-definition.

¾ Confirm that “HDMI Video Format” in the

Setup menu is set properly. ( > 27)

3D video is not output.

¾ Change the settings as required by the connected TV format. ( > 29, “3D Type”)

¾ Is there a non-3D compatible amplifier/ receiver connected between this unit and a

TV? ( > 10)

¾ Are the settings on this unit and the TV correct? ( > 18)

¾ Is the amplifier/receiver that is connected between this unit and TV on?

¾ Depending on the connected TV, the video being played back might switch to 2D video due to changes in resolution etc. Check the

3D setting on the TV.

3D video is not output correctly as 2D.

¾ Select “Set before play” in the Setup menu, and select “2D Playback” in the setup screen displayed when playing 3D discs. ( > 29, “3D

BD-Video Playback”)

¾ Discs that have recorded titles with Side by side (2 screen structure) and that can be enjoyed in 3D are played back in accordance with the settings of the TV.

A black band is displayed around the edge of the screen.

The aspect ratio of the screen is abnormal.

¾ Confirm the “TV Aspect” is set properly.

( > 31)

¾ Adjust the aspect setting on the television.

Audio

Cannot switch audio.

¾ When connecting an amplifier/receiver using an OPTICAL terminal or an HDMI terminal, you cannot switch the audio if “Digital Audio

Output” is set to “Bitstream”. Set “Digital

Audio Output” to “PCM”. ( > 28)

Cannot hear the desired audio type.

¾ Check the connections and the “Digital Audio

Output” settings. ( > 10 , 28)

¾ To output audio from a device connected with an HDMI cable, set “HDMI Audio Output” to

“On” in the Setup menu. ( > 28)

VQT3V64 35

DMP-BDT220GNGCGAGW-VQT3V64.book 36 ページ 2012年2月6日 月曜日 午前9時52分

Playback

Disc cannot be played.

¾ The disc is dirty. ( > 4)

Still pictures (JPEG) do not play back normally.

¾ The images that were edited on the PC, such as Progressive JPEG, etc., may not be played back.

I can’t play back BD-Live.

¾ The SD card is write-protected. ( > 7)

¾ Confirm that this unit is connected to the broadband Internet. ( > 11)

¾ Confirm the “BD-Live Internet Access” settings. ( > 31)

¾ Confirm an SD card is inserted into the SD card slot. ( > 15)

Network

I can’t connect to the network.

¾ Confirm the network connection and settings.

( > 11, 12, 30)

¾ Check the operating instructions for each device and connect accordingly.

When using wireless LAN connection, video from the DLNA Certified media server is not played back or video frames are dropped during playback.

¾ Higher transfer rate router such as 802.11n

(2.4 GHz) wireless router may solve the problem. If you use 802.11n (2.4 GHz) wireless router, it is necessary to set the encryption type to “AES”.

Simultaneous use with a microwave, cordless telephone etc. at 2.4 GHz may result in connection interruptions or other problems.

¾ On the “Wireless Settings” screen ( > 30), the continuous lighting of at least 4 “Reception” indicators is the target for a stable connection. If 3 or fewer indicators are lit or the connection is being interrupted, change the position or angle of your wireless router and see if the connection state improves. If there is no improvement, connect to a wired network and perform the “Easy Network

Setting” ( > 12) again.

36 VQT3V64

DMP-BDT220GNGCGAGW-VQT3V64.book 37 ページ 2012年2月6日 月曜日 午前9時52分

Messages

The following messages or service numbers may appear on the TV or unit’s display.

On the television

Cannot play.

¾ You inserted an incompatible disc.

Cannot play on this unit.

¾ You tried to play a non-compatible image.

¾ Confirm “SD” on the unit’s display is not displayed and re-insert the card.

No disc inserted.

¾ The disc may be upside down.

$ This operation is not available.

¾ Some operations are unsupported by the unit.

For example;

– BD-Video: During playback, reverse slow-motion or reverse frame-by-frame is not possible.

IP address is not set.

¾ The “IP Address” in “IP Address / DNS

Settings” is “---. ---. ---. ---”. Set the “IP

Address”, “Subnet Mask”, and “Gateway

Address”. (Select the automatic address acquisition if necessary.)

The wireless access point currently has a low network security setting. It is recommended to change to a higher setting.

¾ Authentication type for the wireless LAN is set to “Open system”, or the encryption type is set to “No encryption”. It is recommended to encrypt for safety reasons. For details, refer to the instructions of the wireless router being used. Encryption is required when playing back video, etc., from DLNA compatible devices.

On the unit’s display

F99

¾ The unit fails to operate properly. Press [ Í /I] on the main unit for 3 seconds to switch the unit to standby, then switch back on.

HDMI ONLY

¾ Some BD-Video discs can only be output with

HDMI.

NET

¾ While connecting to a network.

No PLAY

¾ There is a viewing restriction on a BD-Video or DVD-Video. ( > 31)

No READ

¾ The media is dirty or badly scratched. The unit cannot play.

PLEASE WAIT

¾ The unit is carrying out internal process. This is not a malfunction. You cannot operate the unit while “PLEASE WAIT” is displayed.

REMOVE

¾ The USB device is drawing too much power.

Remove the USB device.

SET 

(“  ” stands for a number.)

¾ The remote control and main unit are using different codes. Change the code on the remote control.

Press and hold [OK] and the indicated number button at the same time for more than 5 seconds.

U59

¾ The unit is hot.

The unit switches to standby for safety reasons. Wait for about 30 minutes until the message disappears.

Select a position with good ventilation when installing the unit.

VQT3V64 37

DMP-BDT220GNGCGAGW-VQT3V64.book 38 ページ 2012年2月6日 月曜日 午前9時52分

H  or F 

(“  ” stands for a number.)

¾ There is something unusual.

¾ Check the unit using the troubleshooting guide. If the service number remains displayed, do the following.

1 Disconnect the plug from the household mains socket, wait a few seconds, then reconnect it.

2 Press [ Í /I] to turn the unit on.

If the service number remains displayed despite doing the above, request service from the dealer.

Inform the dealer of the service number when requesting service.

START

¾ The system is being restarted during the firmware update. Please do not turn off the unit.

UPD  / 

(“  ” stands for a number.)

¾ The firmware is being updated.

Please do not turn off the unit.

FINISH

¾ The firmware update is complete.

Restriction on use of unauthorized copied content

This unit adopts the following technology for copyright protection.

Cinavia Notice

This product uses Cinavia technology to limit the use of unauthorized copies of some commercially-produced film and videos and their soundtracks. When a prohibited use of an unauthorized copy is detected, a message will be displayed and playback or copying will be interrupted.

More information about Cinavia technology is provided at the Cinavia Online Consumer

Information Center at http://www.cinavia.com.

To request additional information about Cinavia by mail, send a postcard with your mailing address to:

Cinavia Consumer Information Center, P.O.

Box 86851, San Diego, CA, 92138, USA.

38 VQT3V64

DMP-BDT220GNGCGAGW-VQT3V64.book 39 ページ 2012年2月6日 月曜日 午前9時52分

Supplemental information

TV code list

Brand TV Code

ELEMIS

FERGUSON

FINLUX

FISHER

FUJITSU

FUNAI

GOLDSTAR

GOODMANS

GRADIENTE

GRUNDIG

HITACHI

IRRADIO

ITT

JVC

KDS

KOLIN

KONKA

LG

LOEWE

MAG

METZ

MITSUBISHI

MIVAR

Panasonic

AIWA

AKAI

BEKO

BENQ

BRANDT

BUSH

CENTREX

CURTIS

DAEWOO

DESMET

DUAL

01/02/03/04

35

27/30

05/71/72/73/74

58/59

10/15

05

66

05

64/65

05

05

25

17/30/39/70

52

45

62

05/50/51

07/46

52

05/28/79

05/19/20/47

24

05

10/34

61

21

53

63/67

05/50/51

05

36

09

05/22/23/40/41

30

Brand TV Code

NEC 36

NOBLEX

NOKIA

33

25/26/27/60/61

NORDMENDE 10

OLEVIA

ONWA

ORION

PEONY

PHILCO

PHILIPS

PHONOLA

PIONEER

45

30/39/70

05

49/69

41/48/64

05/06/46

05

37/38

PROVIEW

PYE

RADIOLA

SABA

SALORA

SAMSUNG

SANSUI

SANYO

52

05

05

10

26

32/42/43/65/68

05

21/54/55/56

SCHNEIDER

SEG

SELECO

SHARP

SIEMENS

SINUDYNE

05/29/30

05/69/75/76/77/78

05/25

18

09

05

SONY

TCL

08

31/33/66/67/69

TELEFUNKEN 10/11/12/13/14

TEVION 52

THOMSON

TOSHIBA

WHITE

WESTINGHOUSE

YAMAHA

10/15/44

16/57

05

18/41

Language code list

Language Code Language Code Language Code

Abkhazian 6566

Afar: 6565

Afrikaans:

Albanian:

6570

8381

Amharic:

Arabic:

Armenian:

Assamese:

6577

6582

7289

6583

Aymara:

Azerbaijani:

Bashkir:

Basque:

6589

6590

6665

6985

Bengali; Bangla:

6678

Bhutani:

Bihari:

6890

6672

Breton:

Bulgarian:

6682

6671

Burmese: 7789

Byelorussian: 6669

Cambodian: 7577

Catalan: 6765

Chinese:

Corsican:

9072

6779

Croatian:

Czech:

7282

6783

Danish:

Dutch:

English:

Esperanto:

Estonian:

Faroese:

Fiji:

Finnish:

French:

Frisian:

Galician:

Georgian:

7082

7089

7176

7565

German:

Greek:

6869

6976

Greenlandic: 7576

Guarani: 7178

6865

7876

6978

6979

6984

7079

7074

7073

Gujarati:

Hausa:

Hebrew:

Hindi:

Hungarian:

Icelandic:

Indonesian:

Interlingua:

Irish:

Italian:

Japanese:

Javanese:

Kannada:

Kashmiri:

Kazakh:

Kirghiz:

Korean:

Kurdish:

Laotian:

Latin:

7579

7585

7679

7665

Latvian, Lettish: 7686

Lingala: 7678

Lithuanian: 7684

Macedonian: 7775

Malagasy:

Malay:

7771

7783

7165

7384

7465

7487

7578

7583

7575

7589

7185

7265

7387

7273

7285

7383

7378

7365

Malayalam:

Maltese:

Maori:

Marathi:

Moldavian:

Mongolian:

Nauru:

Nepali:

Norwegian:

Oriya:

7879

7982

Pashto, Pushto: 8083

Persian: 7065

Polish: 8076

Portuguese: 8084

Punjabi:

Quechua:

8065

8185

7776

7784

7773

7782

7779

7778

7865

7869

Rhaeto-Romance:

8277

Romanian:

Russian:

8279

8285

Samoan:

Sanskrit:

8377

8365

Scots Gaelic: 7168

Serbian: 8382

Serbo-Croatian: 8372

Shona: 8378

Sindhi:

Singhalese:

8368

8373

Slovak:

Slovenian:

Somali:

Spanish:

8375

8376

8379

6983

Sundanese: 8385

Swahili: 8387

Swedish:

Tagalog:

8386

8476

Tajik:

Tamil:

Tatar:

Telugu:

8471

8465

8484

8469

Thai:

Tibetan:

Tigrinya:

8472

6679

8473

Tonga:

Turkish:

Turkmen:

Twi:

8479

8482

8475

8487

Ukrainian:

Urdu:

8575

8582

Uzbek: 8590

Vietnamese: 8673

Volapük:

Welsh:

Wolof:

Xhosa:

Yiddish:

Yoruba:

Zulu:

8679

6789

8779

8872

7473

8979

9085

Display languages list

Display Language Display Language Display Language

ENG

FRA

DEU

ITA

ESP

NLD

SVE

NOR

DAN

POR

RUS

English

French

German

Italian

Spanish

Dutch

Swedish

Norwegian

Danish

Portuguese

Russian

JPN

CHI

KOR

MAL

VIE

THA

POL

CES

SLK

HUN

FIN

Japanese

Chinese

Korean

Malay

Vietnamese

Thai

Polish

Czech

Slovak

Hungarian

Finnish

ARA

HIN

PER

IND

MRI

BUL

RUM

GRE

TUR

Arabic

Hindi

Persian

Indonesian

Maori

Bulgarian

Romanian

Greek

Turkish

Others

VQT3V64 39

DMP-BDT220GNGCGAGW-VQT3V64.book 40 ページ 2012年2月6日 月曜日 午前9時52分

Specifications

Signal system

Operating temperature range

Operating humidity range

Video output

Audio output

Digital audio output

HDMI AV output

SD card slot

USB slot

Ethernet

Wireless LAN

LASER Specification

Power supply

PAL/NTSC i 5 o C to i 35 o C

10 % to 80 % RH (no condensation)

Output level: 1.0 Vp-p (75 ≠ )

Output connector: Pin jack

(1 system)

Output level: 2 Vrms (1 kHz,

0 dB)

Output connector: Pin jack

Number of connectors:

2 channel

1 system

Optical digital output (Optical terminal)

Output connector: Type A

(19 pin) 1 system

1 system

USB2.0

2 system

10BASE-T/100BASE-TX

1 system

Standard Compliance:

IEEE802.11 b/g/n

Frequency range: 2.4 GHz band

Security: WPA TM /WPA2 TM

(Encryption Type: TKIP/AES,

Authentication Type: PSK),

WEP (64 bit/128 bit)

Class 1 LASER Product

Wave length: 790 nm (CDs)/

660 nm (DVDs)/405 nm (BDs)

Laser power: No hazardous radiation is emitted with the safety protection

[For[Australia[and[New[Zealand]

AC 220 to 240 V, 50 Hz

[Except[Australia[and[New[Zealand]

AC 220 to 240 V, 50 Hz/60 Hz

Power consumption

Power consumption in standby mode

Power consumption in quick start standby mode

Dimensions (W k H k D)

Including the projecting parts

Mass

Approx. 9.9 W

Approx. 0.1 W

Approx. 3.2 W

430 mm k 38 mm k 185 mm

Approx. 1.5 k g

≥ Specifications are subject to change without notice.

File format

File format

MP3

JPEG

DivX

MKV

FLAC

WAV

MPO

“.MP3”, “.mp3”

“.JPG”, “.jpg”

“.DIVX”, “.divx”, “.AVI”,

“.avi”

[Except[South[East[Asia]

Subtitles text file

“.SRT”, “.srt”, “.SUB”,

“.sub”, “.TXT”, “.txt”

“.MKV”, “.mkv”

[Except[South[East[Asia]

Subtitles text file

“.SRT”, “.srt”, “.SSA”,

“.ssa”, “.ASS”, “.ass”

“.flac”

“.wav”

Extension

“.mpo”

Reference

This unit supports ID3 tags, but only titles, artist names and album names can be displayed.

≥ MOTION JPEG and

Progressive JPEG are not supported.

≥ You may not be able to play back the file if you have edited the folder structure or the file name on a

PC or other device.

≥ [Except[South[East[Asia]

The video file and subtitles text file are inside the same folder, and the file names are the same except for the file extensions.

≥ Some DivX and

MKV file may not play back, depending on the video resolution and frame rate condition.

Maximum sampling rate: 192 kHz/24 bit

Maximum sampling rate: 48 kHz/16 bit

3D still picture

≥ With certain recording states and folder structures, the play order may differ or playback may not be possible.

40 VQT3V64

DMP-BDT220GNGCGAGW-VQT3V64.book 41 ページ 2012年2月6日 月曜日 午前9時52分

Audio information

The audio output differs depending on which terminals are connected to the amplifier/receiver, and the settings on the unit. ( > 28, Digital Audio

Output)

≥ The number of channels listed is the maximum possible number of output channels when connected to amplifier/ receiver compatible with the respective audio format.

Terminal

HDMI AV

OUT

OPTICAL

“Digital Audio Output”

“Bitstream” “PCM”

Outputs using original audio *1

Dolby Digital/

DTS Digital Surround

BD-Video :

7.1ch PCM *1*2*3

DVD-Video :

5.1ch PCM

Down-mixed 2ch

PCM

*1

*2

*3

When “BD-Video Secondary Audio” is set to “On”, the audio will be output as Dolby Digital, DTS Digital Surround or 5.1ch PCM.

The maximum possible number of Dolby sound is 5.1ch

PCM.

The audio output is amplified from 5.1ch or 6.1ch to 7.1ch depending on the DTS, Inc. specifications.

Precautions of wireless

LAN connection

The following limits are in place regarding the usage of this unit. You must be aware of these limits before using this unit.

Panasonic will in no way be responsible for any incidental damage which may arise due to a failure to obey these limits, or to any condition of use or disuse of this unit.

≥ Data transmitted and received over radio waves may be intercepted and monitored.

≥ This unit contains delicate electronic components.

Please use this unit in the manner in which it was intended and follow the following points:

– Do not expose this unit to high temperatures or direct sunlight.

– Do not bend, or subject this unit to strong impacts.

– Keep this unit away from moisture.

– Do not disassemble or alter this unit in any way.

VQT3V64 41

DMP-BDT220GNGCGAGW-VQT3V64.book 42 ページ 2012年2月6日 月曜日 午前9時52分

“AVCHD”, “AVCHD 3D”, “AVCHD Progressive” and “AVCHD 3D/Progressive” are trademarks of Panasonic Corporation and Sony

Corporation.

Java is a registered trademark of Oracle and/or its affiliates.

Manufactured under license from Dolby Laboratories.

Dolby and the double-D symbol are trademarks of Dolby Laboratories.

Manufactured under license under U.S. Patent Nos: 5,956,674; 5,974,380; 6,226,616; 6,487,535; 7,392,195; 7,272,567; 7,333,929;

7,212,872 & other U.S. and worldwide patents issued & pending. DTS-HD, the Symbol, & DTS-HD and the Symbol together are registered trademarks & DTS-HD Master Audio | Essential is a trademark of DTS, Inc. Product includes software. © DTS, Inc. All

Rights Reserved.

This item incorporates copy protection technology that is protected by U.S. patents and other intellectual property rights of Rovi

Corporation. Reverse engineering and disassembly are prohibited.

HDMI, the HDMI Logo, and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI   Licensing LLC in the United States and other countries.

This product is licensed under the AVC patent portfolio license and VC-1 patent portfolio license for the personal and non-commercial use of a consumer to (i) encode video in compliance with the AVC Standard and VC-1 Standard (“AVC/VC-1 Video”) and/or (ii) decode AVC/VC-1 Video that was encoded by a consumer engaged in a personal and non-commercial activity and/or was obtained from a video provider licensed to provide AVC/VC-1 Video. No license is granted or shall be implied for any other use. Additional information may be obtained from MPEG LA, LLC.

See http://www.mpegla.com.

HDAVI Control™ is a trademark of Panasonic Corporation.

VIERA Connect is a trademark of Panasonic Corporation.

MPEG Layer-3 audio coding technology licensed from Fraunhofer IIS and Thomson.

SDXC Logo is a trademark of SD-3C, LLC.

“DVD Logo” is a trademark of DVD Format/Logo Licensing Corporation.

The Wi-Fi CERTIFIED Logo is a certification mark of the Wi-Fi Alliance.

The Wi-Fi Protected Setup Mark is a mark of the Wi-Fi Alliance.

“Wi-Fi”, “Wi-Fi Protected Setup”, “Wi-Fi Direct”, “WPA” and “WPA2” are marks or registered marks of the Wi-Fi Alliance.

DivX

®

, DivX Certified

®

and associated logos are trademarks of Rovi Corporation or its subsidiaries and are used under license.

ABOUT DIVX VIDEO:

DivX

®

is a digital video format created by DivX, LLC, a subsidiary of Rovi Corporation. This is an official DivX Certified

®

device that plays DivX video. Visit divx.com for more information and software tools to convert your files into DivX videos.

ABOUT DIVX VIDEO-ON-DEMAND:

This DivX Certified ® device must be registered in order to play purchased DivX Video-on-Demand (VOD) movies.

To obtain your registration code, locate the DivX VOD section in your device setup menu.

Go to vod.divx.com for more information on how to complete your registration.

42 VQT3V64

DMP-BDT220GNGCGAGW-VQT3V64.book 43 ページ 2012年2月6日 月曜日 午前9時52分

DLNA, the DLNA Logo and DLNA CERTIFIED are trademarks, service marks, or certification marks of the Digital Living Network

Alliance.

Windows is a trademark or a registered trademark of Microsoft Corporation in the United States and other countries.

Skype, associated trade marks and logos and the “ ” logo are trade marks of Skype Limited.

This product incorporates the following software:

(1) the software developed independently by or for Panasonic Corporation,

(2) the software owned by third party and licensed to Panasonic Corporation,

(3) the software licensed under the GNU General Public License, Version 2 (GPL v2),

(4) the software licensed under the GNU LESSER General Public License, Version 2.1 (LGPL v2.1) and/or,

(5) open sourced software other than the software licensed under the GPL v2 and/or LGPL v2.1

For the software categorized as (3) and (4), please refer to the terms and conditions of GPL v2 and LGPL v2.1, as the case may be at http://www.gnu.org/licenses/old-licenses/gpl-2.0.html and http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.

In addition, the software categorized as (3) and (4) are copyrighted by several individuals. Please refer to the copyright notice of those individuals at http://panasonic.net/avc/oss/bdplayer/AWBPP12.html

The GPL/LGPL software is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY, without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.

At least three (3) years from delivery of products, Panasonic will give to any third party who contacts us at the contact information provided below, for a charge no more than our cost of physically performing source code distribution, a complete machine-readable copy of the corresponding source code covered under GPL v2/LGPL v2.1.

Contact Information [email protected]

Source code is also freely available to you and any other member of the public via our website below.

http://panasonic.net/avc/oss/bdplayer/AWBPP12.html

For the software categorized as (5) includes as follows.

1. This product includes software developed by the OpenSSL Project for use in the OpenSSL Toolkit.

(http://www.openssl.org/)

2. This product includes software developed by the University of California, Berkeley and its contributors.

3. FreeType code.

4. The Independent JPEG Group's JPEG software.

(1) MS/WMA

This product is protected by certain intellectual property rights of Microsoft Corporation and third parties. Use or distribution of such technology outside of this product is prohibited without a license from Microsoft or an authorized Microsoft subsidiary.

(2) Vorbis, FLAC, WPA Supplicant

The software licenses are displayed when “Software Licence” in the Setup menu is selected. ( > 32)

Copyright 2004-2010 Verance Corporation. Cinavia TM is a Verance Corporation trademark. Protected by U.S. Patent 7,369,677 and worldwide patents issued and pending under license from Verance Corporation. All rights reserved.

VQT3V64 43

DMP-BDT220GNGCGAGW-VQT3V64.book 44 ページ 2012年2月6日 月曜日 午前9時52分

Information on Disposal in other Countries outside the European Union

This symbol is only valid in the European Union.

If you wish to discard this product, please contact your local authorities or dealer and ask for the correct method of disposal.

(Inside of product)

Panasonic Corporation

Web Site: http://panasonic.net

C Panasonic Corporation 2012 p

VQT3V64

F0212ST0

advertisement

Was this manual useful for you? Yes No
Thank you for your participation!

* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project

Related manuals