Man & Machine Really Cool User Manual
Man & Machine Really Cool is a water-resistant and contaminant-proof keyboard designed for use in industrial, marine, and medical settings, as well as other applications where moisture, cleaning, and durability are important. It features tactile feedback keys, a sealed and rigid surface, and is compatible with standard keyboard layouts without requiring drivers.
PDF
Download
Document
Advertisement
Advertisement
Specifications subject to change without notice Composition: 100% Silicone Rubber PVC Cable 100% Latex free System requirements: USB interface PS/2 interface (USB to PS/2 Adapter Not Included) Number of keys: 104 = US Layout with Windows™ keys plus 4 additional function keys Warranty period: Limited lifetime warranty You can email us at: [email protected] or call us at: (301) 341-4900 In Europe, contact +31-23-5450185 www.man-machine.com USB: Attach the keyboard cable to a USB computer port. (You do not have to turn off your computer. There is no software to install.) PS2: Turn off your computer before attaching devices. If you have another keyboard attached, disconnect it. Attach the PS2 keyboard Adapter (sold separately) to USB cable connector. Attach cable to the keyboard port. Turn on your computer to activate the keyboard. (There is no software to install.) Installing Your Really Cool Keyboard Weight: 780 g (1.7 lb.) Dimensions: 381 mm x 140 mm x 15.3 mm 15” x 5.5” x 0.6” Cable length: 1.83 m (6’) Storage temperature: -20 °C - 70 °C -4 ° F - 158 °F Operating temperature: 0 °C - 70 °C 32 °F – 158 ° F Voltage: 5 Volt Current input: 26 mA The Really Cool is a water-resistant and contaminant proof keyboard with tactile feedback keys. The sealed and rigid surface is ideal for industrial, marine, and medical use, as well as other applications where moisture, cleaning, and durability are a consideration. Because the Really Cool is also quieter than "standard" keyboards, they are great for applications where noise generated from “key-clicks” is a problem. The Really Cool is compatible with standard keyboard layouts and drivers are not needed. RReeaallllyy CCooooll KKeeyybbooaarrdd Chlorine based (max 10% solution) – Chlorox, Novalsan, etc. Formaldehyde based - Formaldehyde Solution 37%, Vinco Formaldegen, etc. Glutaraldehyde based – Aldacide 200, Lysofume, Wavicide, etc. Phenol based – Lysol I.C., Beaucoup, Magna Clean, Tek-Trol, etc. Alcohol based – Cavicide, Isopropyl Alcohol, Medicide, etc. Oxidizing – Hydrogen Peroxide 3% Solution, Lifegard Series, etc. Quaternary Ammonium – Roccal-D, Bacto-Sep, Parvosol, etc. Soap and water Acetone Over 10% bleach solutions Temperature or pressure sterilization Buffing pads or scrubbing pads • • • • Copyright Man & Machine, Inc. 2007 THESE INSTRUCTIONS AND RECOMMENDATIONS HAVE BEEN PREPARED TO ADVISE THE PROPER METHODS FOR CLEANING YOUR PRODUCT. MAN & MACHINE, INC. OR THE LOCAL DISTRIBUTOR CANNOT ASSUME ANY RESPONSIBILITY FOR THE APPLICATION OF THEM. IF THERE ARE ANY QUESTIONS, PLEASE CONTACT PLACE OF PURCHASE OR MMI PRIOR TO CLEANING. Petroleum based cleaning fluids, such as Gasoline • DO NOT USE: • • • • • • • • Disinfectants recommended by Man & Machine, Inc.: 1. Clean the surface of the product by wiping, brushing, spraying or dipping it. Use only rags, sponges or soft bristle brushes. DO NOT place the USB or PS/2 connector into the fluid. 2. Either wipe with dry cloth or allow to air dry. Cleaning Instructions for Waterproof Keyboards and Mice: ">
Advertisement