Panasonic DMP-BD85 Operating Instructions Manual

Add to my manuals
44 Pages

advertisement

Panasonic DMP-BD85 Operating Instructions Manual | Manualzz

VQT2H83~Safety_mst.fm 1 ページ 2010年2月8日 月曜日 午後3時53分

Operating Instructions

Blu-ray Disc Player

Model No.

DMP-BD85

Dear customer

Thank you for purchasing this product.

For optimum performance and safety, please read these instructions carefully.

Before connecting, operating or adjusting this product, please read the instructions completely.

Please keep this manual for future reference.

GN GC GA until

2010/2/7

VQT2H83

DMP-BD85GN&GA&GC-VQT2H83_eng.book 2 ページ 2010年2月5日 金曜日 午後12時39分

CAUTION!

THIS PRODUCT UTILIZES A LASER.

USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE

OF PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN

MAY RESULT IN HAZARDOUS RADIATION EXPOSURE.

DO NOT OPEN COVERS AND DO NOT REPAIR YOURSELF.

REFER SERVICING TO QUALIFIED PERSONNEL.

WARNING:

TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK OR

PRODUCT DAMAGE,

≥ DO NOT EXPOSE THIS APPARATUS TO RAIN, MOISTURE,

DRIPPING OR SPLASHING AND THAT NO OBJECTS FILLED

WITH LIQUIDS, SUCH AS VASES, SHALL BE PLACED ON

THE APPARATUS.

≥ USE ONLY THE RECOMMENDED ACCESSORIES.

≥ DO NOT REMOVE THE COVER (OR BACK); THERE ARE NO

USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO

QUALIFIED SERVICE PERSONNEL.

CAUTION!

≥ DO NOT INSTALL OR PLACE THIS UNIT IN A BOOKCASE,

BUILT-IN CABINET OR IN ANOTHER CONFINED SPACE.

ENSURE THE UNIT IS WELL VENTILATED. TO PREVENT RISK

OF ELECTRIC SHOCK OR FIRE HAZARD DUE TO

OVERHEATING, ENSURE THAT CURTAINS AND ANY OTHER

MATERIALS DO NOT OBSTRUCT THE VENTILATION VENTS.

≥ DO NOT OBSTRUCT THE UNIT’S VENTILATION OPENINGS

WITH NEWSPAPERS, TABLECLOTHS, CURTAINS, AND

SIMILAR ITEMS.

≥ DO NOT PLACE SOURCES OF NAKED FLAMES, SUCH AS

LIGHTED CANDLES, ON THE UNIT.

≥ DISPOSE OF BATTERIES IN AN ENVIRONMENTALLY

FRIENDLY MANNER.

CAUTION

Danger of explosion if battery is incorrectly replaced.

Replace only with the same or equivalent type recommended by the manufacturer. Dispose of used batteries according to the manufacturer’s instructions.

This product may receive radio interference caused by mobile telephones during use. If such interference is apparent, please increase separation between the product and the mobile telephone.

The socket outlet shall be installed near the equipment and easily accessible.

The mains plug of the power supply cord shall remain readily operable.

To completely disconnect this apparatus from the AC Mains, disconnect the power supply cord plug from AC receptacle.

[For[Australia[and[New[Zealand]

THIS UNIT IS INTENDED FOR USE IN MODERATE

CLIMATES.

[For]Asia]and]Middle]East]

THIS UNIT IS INTENDED FOR USE IN TROPICAL

CLIMATES.

Caution for AC Mains Lead

(For Saudi Arabia)

For your safety, please read the following text carefully.

This appliance is supplied with a moulded three pin mains plug for your safety and convenience.

A 5-ampere fuse is fitted in this plug.

Should the fuse need to be replaced please ensure that the replacement fuse has a rating of 5-ampere and that it is approved by ASTA or BSI to BS1362.

Check for the ASTA mark Ï or the BSI mark Ì on the body of the fuse.

If the plug contains a removable fuse cover you must ensure that it is refitted when the fuse is replaced.

If you lose the fuse cover the plug must not be used until a replacement cover is obtained.

A replacement fuse cover can be purchased from your local dealer.

CAUTION!

IF THE FITTED MOULDED PLUG IS UNSUITABLE FOR

THE SOCKET OUTLET IN YOUR HOME THEN THE

FUSE SHOULD BE REMOVED AND THE PLUG CUT

OFF AND DISPOSED OF SAFELY.

THERE IS A DANGER OF SEVERE ELECTRICAL

SHOCK IF THE CUT OFF PLUG IS INSERTED INTO

ANY 13-AMPERE SOCKET.

If a new plug is to be fitted please observe the wiring code as stated below.

If in any doubt please consult a qualified electrician.

IMPORTANT

The wires in this mains lead are coloured in accordance with the following code:

Blue: Neutral, Brown: Live.

As these colours may not correspond with the coloured markings identifying the terminals in your plug, proceed as follows:

The wire which is coloured Blue must be connected to the terminal which is marked with the letter N or coloured Black or Blue.

The wire which is coloured Brown must be connected to the terminal which is marked with the letter L or coloured Brown or Red.

WARNING: DO NOT CONNECT EITHER WIRE TO

THE EARTH TERMINAL WHICH IS MARKED WITH

THE LETTER E, BY THE EARTH SYMBOL

Ó

OR

COLOURED GREEN OR GREEN/YELLOW.

THIS PLUG IS NOT WATERPROOF—KEEP DRY.

Before use

Remove the connector cover.

How to replace the fuse

The location of the fuse differ according to the type of AC mains plug (figures A and B). Confirm the AC mains plug fitted and follow the instructions below.

Illustrations may differ from actual AC mains plug.

1. Open the fuse cover with a screwdriver.

Figure A Figure B

Fuse cover

2. Replace the fuse and close or attach the fuse cover.

Figure A Figure B

2

VQT2H83

DMP-BD85GN&GA&GC-VQT2H83_eng.book 3 ページ 2010年2月5日 金曜日 午後12時39分

Table of contents

Getting started

Caution for AC Mains Lead . . . . . . . . . . .2

Accessory. . . . . . . . . . . . . . . . . . . . . . . . .4

Unit and media care . . . . . . . . . . . . . . . . .4

Control reference guide . . . . . . . . . . . . . .5

Playable discs/Cards/USB devices . . . . .6

Connections and settings

STEP 1 : Connecting to a TV . . . . . . . . . .8

STEP 2 : Connecting to an amplifier/receiver . . . . . . . .9

STEP 3 : Connecting to a broadband network. . . . . . .10

STEP 4 : Connecting AC mains lead . . .11

STEP 5 : Setting. . . . . . . . . . . . . . . . . . .12

STEP 6 : Reprogramming the remote control . . . . . . . . . . . . . . . . . .14

Playback

Inserting or removing a media . . . . . . . .15

FUNCTION menu. . . . . . . . . . . . . . . . . .15

Playing video contents . . . . . . . . . . . . . .16

Playing still pictures . . . . . . . . . . . . . . . .20

Playing music . . . . . . . . . . . . . . . . . . . . .21

Linked operations with the TV

(VIERA Link “HDAVI Control ™ ”) . . . . . . .22

Enjoying VIERA CAST ™ . . . . . . . . . . . . .23

DLNA feature . . . . . . . . . . . . . . . . . . . . .24

Settings

Playback menu. . . . . . . . . . . . . . . . . . . .26

Setup menu . . . . . . . . . . . . . . . . . . . . . .28

Reference

Troubleshooting guide. . . . . . . . . . . . . . 32

Messages . . . . . . . . . . . . . . . . . . . . . . . 34

Audio Information . . . . . . . . . . . . . . . . . 35

About MP3/JPEG/DivX/AVCHD/MPEG2 files . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37

Specifications . . . . . . . . . . . . . . . . . . . . 39

Supplemental information . . . . . . . . . . . 40

Glossary . . . . . . . . . . . . . . . . . . . . . . . . 41

Safety precautions. . . . . . . . . . . . . . . . . 43

Index . . . . . . . . . . . . . . . . . . . . .Backcover

About descriptions in these operating instructions

≥ Instructions for operations are generally described using the remote control.

Firmware updating (

>

14)

3

VQT2H83

DMP-BD85GN&GA&GC-VQT2H83_eng.book 4 ページ 2010年2月8日 月曜日 午後1時22分

Getting started

Accessory

Check the supplied accessories before using this unit.

[For[Australia[and[New[Zealand]

1 Remote control ( N2QAKB000082 )

2 Batteries for remote control

1 AC mains lead

1 Audio/Video cable

1 Wireless LAN Adaptor (DY-WL10* 2 )

(C5ZZZ0000049)

1 USB extension cable (DY-WL10* 2 )

(K2KYYYY00064)

[For\Middle\East\and\Asia[

1 Remote control ( N2QAKB000082 )

2 Batteries for remote control

1 Audio/Video cable

2 AC mains lead* 1

*1

*2

See page 11 for more information.

DY-WL10 is supplied as a kit containing Wireless LAN Adaptor

(C5ZZZ0000049) and USB extension cable (K2KYYYY00064), also available for sale as an optional accessory.

≥ Product numbers correct as of February 2010. These may be subject to change.

≥ Do not use AC mains lead and Wireless LAN Adaptor with other equipment. Wireless LAN Adaptor is not designed to use with PC.

≥ MAC address is stated on the bottom of Wireless LAN Adaptor.

Using the remote control

Insert so the poles ( i and j ) match those in the remote control.

R6/LR6, AA

(Alkaline or manganese batteries)

Point it at remote control signal sensor on this unit. ( > 5)

Mishandling of batteries can cause electrolyte leakage which can damage items the fluid contacts and may cause a fire.

≥ Do not mix old and new batteries or different types at the same time.

≥ Do not heat or expose to flame.

≥ Do not leave the battery(ies) in an automobile exposed to direct sunlight for a long period of time with doors and windows closed.

≥ Do not take apart or short circuit.

≥ Do not attempt to recharge alkaline or manganese batteries.

≥ Do not use batteries if the covering has been peeled off.

Remove batteries if the remote control is not going to be used for a long period of time. Store in a cool, dark place.

Unit and media care

Clean this unit with a soft, dry cloth

≥ Never use alcohol, paint thinner or benzine to clean this unit.

≥ Before using chemically treated cloth, carefully read the instructions that came with the cloth.

Clean the lens with the lens cleaner

Lens cleaner: RP-CL720E

≥ This lens cleaner may not be for sale depending on the region.

≥ This lens cleaner is primarily for use on Panasonic DVD recorders (DIGA), but it is also suitable for use on this unit.

Clean discs

DO DO NOT

Wipe with a damp cloth and then wipe dry.

Disc and card handling precautions

≥ Handle discs by the edges to avoid inadvertent scratches or fingerprints on the disc.

≥ Do not attach labels or stickers to discs.

≥ Do not use record cleaning sprays, benzine, thinner, static electricity prevention liquids or any other solvent.

≥ Clean any dust, water, or foreign matter from the terminals on the rear side of the card.

≥ Do not use the following discs:

– Discs with exposed adhesive from removed stickers or labels (rented discs etc).

– Discs that are badly warped or cracked.

– Irregularly shaped discs, such as heart shapes.

To dispose or transfer this unit

The unit may keep the user settings information in the unit. If you discard this unit either by disposal or transfer, then follow the procedure to return all the settings to the factory presets to delete the user settings. ( > 32, “To return all settings to the factory preset.”)

≥ The operation history may be recorded in the memory of this unit.

4

VQT2H83

DMP-BD85GN&GA&GC-VQT2H83_eng.book 5 ページ 2010年2月5日 金曜日 午後12時39分

Control reference guide

12

1

2

3

4

5

6

13

14

15

16

17

18

7

8

9

10

11

19

20

21

22

1 Turn the unit on and off ( > 12)

2 TV operation buttons ( > 14)

You can operate the TV through the unit’s remote control.

[ Í TV] : Turn the television on and off

[AV] : Switch the input select

[ i j VOL] : Adjust the volume

[ W X CH] : Channel select

3 Select title numbers, etc./Enter numbers or characters

( > 23)

[CANCEL] : Cancel

4 Show playback menu ( > 26)

5 Switch on/off Secondary Video (Picture-in-picture) ( > 18)

6 Basic playback control buttons ( > 16)

7 Show status messages ( > 16)

8 Show Pop-up menu ( > 16)

9 Show Top menu/DIRECT NAVIGATOR ( > 16)

10 Show OPTION menu ( > 17)

11 Coloured buttons (red, green, yellow, blue)

These buttons are used when;

≥ Operating a BD-Video disc that includes Java TM applications (BD-J).

≥ Displaying “Title View” and “Album View” screens.

( > 20)

≥ Operating contents of VIERA CAST. ( > 23)

12 Transmit the remote control signal

13 Open or close the disc tray ( > 15)

CAUTION

Do not place objects in front of the unit. The disc tray may collide with objects when it is opened, and this may cause injury.

14 Adjust the volume of an amplifier/receiver.

( > 14)

15 Select audio ( > 16)

16 Reproduce more natural audio ( > 17)

17 Select drive (BD/DVD/CD, SD card or USB device)

( > 15)

18 Displays the Home screen of the VIERA CAST ( > 23)

19 Exit the menu screen

20 Show FUNCTION menu ( > 15)

21 Selection/OK, Frame-by-frame ( > 16)

22 Return to previous screen

1 2 3 4 5 6 7

8

1 Standby/on switch ( Í /I ) ( > 12)

Press to switch the unit from on to standby mode or vice versa. In standby mode, the unit is still consuming a small amount of power.

2 Display

Disc indicator

The indicator blinks when reading data from a disc, a card or a USB device, or writing data to a card.

3 Disc tray ( > 15)

4 Remote control signal sensor

Distance: Within approx. 7 m

Angle: Approx. 20 e up and down, 30 e left and right

Pull to flip down the front panel.

9 10

5 Stop ( > 16)

6 Start play ( > 16)

7 Open or close the disc tray ( > 15)

8 SD Card LED

≥ It is possible to set the LED to turn on/off. ( > 30)

9 SD card slot ( > 15)

10 USB port ( > 15)

≥ There is another port at the back of the main unit.

Two USB ports cannot be used simultaneously.

[For[Australia[and[New[Zealand]

USB ports can be used simultaneously only with the supplied Wireless LAN Adaptor ( > 10).

Rear panel terminals ( > 8–11)

5

VQT2H83

DMP-BD85GN&GA&GC-VQT2H83_eng.book 6 ページ 2010年2月5日 金曜日 午後12時39分

Playable discs/Cards/USB devices

Type

Logo examples

Type detail

BD-Video

BD-RE

BD

BD-R

DVD-Video

DVD-RAM

DVD

DVD-R

DVD-R DL

DVD-RW

Video

AVCHD

+R/+RW/+R DL

Music CD

Music [CD-DA]

CD

SD

USB

CD-R

CD-RW

USB device

(up to 128 GB)

DivX

Music [CD-DA]

MP3

JPEG

SD Memory Card (from 8 MB to 2 GB)

(Including miniSD Card and microSD Card)

SDHC Memory Card (from 4 GB to 32 GB)

(Includes microSDHC Card)

SDXC Memory Card (48 GB, 64 GB)

(Includes microSDXC Card)

MPEG2

AVCHD

JPEG

DivX

MP3

JPEG

* See page 7, 37–38 for more information on the types of content that can be played.

Playable contents*

Video

Video

JPEG

Video

DivX ®

Video

Video

AVCHD

JPEG

Video

AVCHD

DivX

MP3

JPEG

6

VQT2H83

DMP-BD85GN&GA&GC-VQT2H83_eng.book 7 ページ 2010年2月8日 月曜日 午後1時22分

Discs that cannot be played in this unit

Any other disc that is not specifically supported or previously described.

≥ 2.6 GB and 5.2 GB DVD-RAM

≥ DVD-RAM that cannot be removed from their cartridges

≥ Super Audio CD

≥ Photo CD

≥ DVD-Audio

≥ Video CD and Super Video CD

≥ WMA discs

≥ HD DVD

Region management information

[For[Australia[and[New[Zealand]

BD-Video:

This unit plays BD-Video marked with labels containing the region code “ B ”.

Example:

DVD-Video:

This unit plays DVD-Video marked with labels containing the region number “ 4 ” or “ ALL ”.

Example:

4 ALL

2

3

4

[For]Middle]East]

BD-Video:

This unit plays BD-Video marked with labels containing the region code “ B ”.

Example:

DVD-Video:

This unit plays DVD-Video marked with labels containing the region number “ 2 ” or “ ALL ”.

Example:

2 ALL

2

3

4

[For[Asia]

BD-Video:

This unit plays BD-Video marked with labels containing the region code “ A ”.

Example:

DVD-Video:

This unit plays DVD-Video marked with labels containing the region number “ 3 ” or “ ALL ”.

Example:

3 ALL

2

3

4

Finalize

DVD-R/RW/R DL, +R/+RW/+R DL and CD-R/RW recorded by a recorder, etc. needs to be finalized by the recorder to play on this unit. Please refer to the recorder’s instructions.

BD-Video

This unit supports high bit rate audio (Dolby Digital Plus,

Dolby TrueHD, DTS-HD High Resolution Audio and DTS-HD

Master Audio) adopted in BD-Video. In order to enjoy these audio formats, refer to page 35.

Music CD

Operation and sound quality of CDs that do not conform to

CD-DA specifications (copy control CDs, etc.) cannot be guaranteed.

SD card

≥ MiniSD Cards, microSD Cards, microSDHC

Cards and microSDXC Cards can be used, but must be used with an adaptor card. These are usually supplied with such cards, or otherwise customer provided.

≥ Keep the Memory Card out of reach of children to prevent swallowing.

≥ To protect the card’s contents, move the record prevention tab (on the SD card) to “LOCK”.

≥ This unit is compatible with SD Memory Cards that meet SD

Card Specifications FAT12 and FAT16 formats, as well as

SDHC Memory Cards in FAT32 format (Does not support long file name.) and SDXC Memory Cards in exFAT.

≥ If the SD card is used with incompatible computers or devices, recorded contents may be erased due to the card being formatted etc.

≥ Useable memory may be slightly less than the card capacity.

USB device

≥ This unit supports connecting a USB memory, digital camera and video camera produced by Panasonic, etc. It is not warranted that all USB devices will work with this unit.

≥ This unit does not support USB device charging.

≥ FAT12, FAT16 and FAT32 file systems are supported.

≥ This unit supports USB 2.0 High Speed.

BD-RE, BD-R

Discs recorded in DR mode using Panasonic Blu-ray Disc recorders may not playback the audio etc., correctly.

≥ It may not be possible to play the above media in some cases due to the type of media, the condition of the recording, the recording method and how the files were created.

≥ The producers of the disc can control how discs are played. So you may not always be able to control play as described in these operating instructions. Read the disc’s instructions carefully.

7

VQT2H83

DMP-BD85GN&GA&GC-VQT2H83_eng.book 8 ページ 2010年2月5日 金曜日 午後12時39分

STEP 1 : Connecting to a TV

≥ Do not place the unit on amplifiers/receiver or equipment that may become hot. The heat can damage the unit.

≥ Before making any connections we suggest you temporarily disconnect all the units from AC power.

≥ Do not connect video signals through a video recorder. Due to copy guard protection the picture may not be displayed properly.

≥ Refer to page 36, about recommended settings for each piece of connected equipment.

≥ Please use High Speed HDMI Cables that have the HDMI logo (as shown on the cover). It is recommended that you use Panasonic’s HDMI cable. When outputting 1080p signal, please use HDMI cables 5.0 meters or less.

Recommended part number:

RP-CDHS15 (1.5 m), RP-CDHS30 (3.0 m),

RP-CDHS50 (5.0 m), etc.

Highest Quality

(VIDEO)

Standard Quality

(VIDEO)

Via an HDMI AV OUT terminal

Via a COMPONENT VIDEO

OUT terminal

Via a VIDEO OUT terminal

HDMI IN

HDMI cable

COMPONENT

VIDEO IN

AUDIO IN

R L

Component

Video cable

Audio/Video cable

(supplied)

AUDIO IN

R L VIDEO IN

Audio/Video cable

(supplied)

≥ The HDMI connection supports

VIERA Link “HDAVI Control” ( > 22) when used with a compatible

Panasonic TV.

≥ Set “HDMI Video Mode” and “HDMI

Audio Output” to “On” ( > 30).

≥ Connect terminals of the same colour.

≥ Set “Component Resolution” to

“576p/480p”, “720p” or “1080i”.

( > 30)

≥ Set “HDMI Video Mode” to “Off”

( > 30).

≥ Connect terminals of the same colour.

8

VQT2H83

DMP-BD85GN&GA&GC-VQT2H83_eng.book 9 ページ 2010年2月5日 金曜日 午後12時39分

STEP 2 : Connecting to an amplifier/receiver

Digital Audio

Via an HDMI AV OUT terminal

Via a COAXIAL or OPTICAL terminal

Amplifier/receiver

Analogue Audio

Via a 5.1/7.1ch AUDIO OUT terminal

Multi channel speakers

HDMI cable

HDMI IN

HDMI OUT

HDMI IN

Multi channel speakers

Amplifier/receiver

HDMI IN

HDMI cable

COAXIAL IN OPTICAL IN

Coaxial cable

OR

Optical cable

Amplifier/receiver

Connect Audio cables to terminals corresponding to the speakers you have connected.

  

 

≥ The HDMI connection supports

VIERA Link “HDAVI Control” ( > 22) when used with a compatible

Panasonic TV.

≥ Set “HDMI Video Mode” and “HDMI

Audio Output” to “On” ( > 30).

≥ Set “Digital Audio Output” depending on the used terminal and connected amplifier/receiver ( > 29).

≥ When connecting a TV ( > 8) with

HDMI AV OUT terminal, set “HDMI

Audio Output” to “Off” ( > 30).

≥ Set “Digital Audio Output” depending on the used terminal and connected amplifier/receiver ( > 29).

Cable connections a Surround back speaker (L/R)

(Only for 7.1ch AUDIO OUT) b Front speaker (L/R) c Surround speaker (L/R) d Subwoofer e Centre speaker

≥ Set “Analog Audio Output” to “7.1ch” or “2ch (Downmix) + 5.1ch”, depending on the used terminal

( > 30).

≥ You can set the “Analog Audio

Output” from the “Easy Setting”

( > 12).

≥ When connecting equipment with

HDMI AV OUT terminal, set “HDMI

Audio Output” to “Off” ( > 30).

9

VQT2H83

DMP-BD85GN&GA&GC-VQT2H83_eng.book 10 ページ 2010年2月8日 月曜日 午後1時22分

STEP 3 : Connecting to a broadband network

The following services can be used when this unit is connected to broadband.

≥ Firmware can be updated ( > 14)

≥ You can enjoy BD-Live ( > 18)

≥ You can enjoy VIERA CAST ( > 23)

≥ DLNA feature ( > 24)

For details about connection method, refer to the instructions supplied with the connected equipment.

∫ Using LAN (ethernet) cable

[For[Australia[and[New[Zealand]

∫ Using Wireless LAN Adaptor DY-WL10

LAN Cable

(Straight)

Broadband router, etc.

Internet

Wireless LAN Adaptor

(supplied)

Wireless router

(Access point), etc.

Internet

≥ Use shielded LAN cables when connecting to peripheral devices.

≥ Inserting any cable other than a LAN cable in the LAN terminal can damage the unit.

≥ Wireless LAN Adaptors other than the supplied Wireless

LAN Adaptor cannot be used.

≥ When connection conditions are poor, use the supplied

USB extension cable to connect the Wireless LAN Adaptor provided with this unit.

≥ Do not use any other USB extension cables except the supplied one.

≥ For up to date compatibility information on your Wireless router (Access Point) refer to http://panasonic.jp/support/global/cs/

≥ The unit is not compatible with public wireless LAN services provided in airports, stations, cafes etc.

10

VQT2H83

DMP-BD85GN&GA&GC-VQT2H83_eng.book 11 ページ 2010年2月5日 金曜日 午後12時39分

[For[Australia[and[New[Zealand]

Precautions of Wireless LAN Adaptor

The following limits are in place regarding the usage of this device. You must be aware of these limits before using this device.

Panasonic will in no way be responsible for any incidental damage which may arise due to a failure to obey these limits, or to any condition of use or disuse of this device.

≥ Do not use this device to connect to any wireless network for which you do not have usage rights.

During automatic searches in a wireless network environment, wireless networks (SSID*) for which you do not have usage rights may be displayed; however, using these networks may be regarded as illegal access.

* An SSID (Service Set IDentification) is a name used by wireless LAN to identify a particular network. Transmission is possible if the SSID matches for both devices.

≥ Data transmitted and received over radio waves may be intercepted and monitored.

≥ This wireless LAN adaptor contains delicate electronic components.

Please use this adaptor in the manner in which it was intended and follow the following points .

–Do not expose the adaptor to high temperatures or direct sunlight.

–Do not bend, or subject the adaptor to strong impacts.

–Keep the adaptor away from moisture.

–Do not disassemble or alter the adaptor in any way.

–Do not attempt to install the adaptor in any incompatible device.

≥ Wireless LAN Adaptor is prohibited from export or bringing into nations* upon which the United States place embargoes. Wireless LAN Adaptor is subject to Export Administration Regulations (EAR) due to the installation of encryption device made in the United States.

(Current as of November 2009)

* Cuba, Iran, Syria, North Korea, Sudan etc.

STEP 4 : Connecting AC mains lead

To a household mains socket

AC mains lead (supplied)

[For]Middle]East]

Use the AC mains lead that matches the socket for the area you live in.

[For\Saudi\Arabia[ BE SURE TO READ THE

CAUTION FOR THE AC MAINS

LEAD ON PAGE 2 BEFORE

CONNECTION.

[For[Asia]

AC mains lead with a label is for Thailand.

AC mains lead without a label is for areas other than

Thailand.

≥ This unit consumes a small amount of AC power (“Quick

Start”: “Off”, approx. 0.2 W) even when turned off. In the interest of power conservation, if you will not be using this unit for an extended period of time, it can be disconnected.

11

VQT2H83

DMP-BD85GN&GA&GC-VQT2H83_eng.book 12 ページ 2010年2月8日 月曜日 午後1時22分

STEP 5 : Setting

Easy Setting

After connecting your new player for the first time and pressing [ Í ], a screen for the basic settings will appear.

Preparation

Turn on the television and select the appropriate video input on the television.

1

Press [

Í

].

Setup screen appears.

If this unit is connected to a Panasonic TV (VIERA) supporting HDAVI Control 2 or later via an HDMI cable, then the setting information on the TV is acquired by this TV.

2

Follow the on-screen instructions and make the settings with [

3

,

4

] and press [OK].

“On-Screen Language” [For[Asia] , “TV Aspect”, “Analog

Audio Output” and “Quick Start” are set.( > 29 – 31)

After completing “Easy Setting”, you can perform “Network

Easy Setting”.

≥ You can perform this setup anytime by selecting “Easy Setting” in the

Setup menu. ( > 31)

≥ You can also change these settings individually. ( > 29 – 31)

≥ Initial setting is set to “2ch (Downmix) + 5.1ch”, so you will need to select

“7.1ch” if using the 7.1ch output.

Analog Audio Output

Set unit’s analog audio output.

Select “7.1ch” only when connected to an audio receiver through 7.1ch analog connections.

Otherwise, select “2ch (Downmix) + 5.1ch”.

2ch (Downmix) + 5.1ch

7.1ch

OK

RETURN

Network Easy Setting

For Australia and New Zealand

After completing “Easy Setting”, you will be asked to perform

“Network Easy Setting”.

Select “Wired” or “Wireless” and press [OK].

Network Easy Setting (Connection Test)

Select a connection mode.

Current setting : Wired

LAN cable connection:

Connect a LAN cable to the unit and select “Wired”.

Wireless LAN connection:

Connect the Wireless LAN Adaptor (DY-WL10) to the USB

port and select “Wireless”.

Wired

Wireless

OK

RETURN

“Wired” connection

Follow the on-screen instructions to make your connection settings.

≥ When you experience problems ( > 13)

12

VQT2H83

“Wireless” connection

If you select “Wireless” and “Wireless LAN Adaptor is not connected.” is displayed, check that the Wireless LAN

Adaptor is fully inserted. Alternatively, disconnect and reconnect it. If there is still no change in the display, consult your dealer for advice.

Select “WPS (PUSH button)” or “Search for access point” and then follow the on-screen instructions and make the settings.

Access Point Connection Setting

Select a connection method for access to

Wireless LAN.

Please refer to the operating instructions of the access point about connection methods.

WPS (PUSH button)

Search for access point

WPS (PUSH button): e.g.

If your Wireless router (Access point) supports WPS (PUSH button), you can easily perform the settings by pressing WPS button on it.

WPS (Wi-Fi Protected Setup) is a standard that facilitates settings relating to the connection and security of wireless LAN devices.

1 Press WPS button or corresponding button of Wireless router (Access point) until the lamp starts flashing.

≥ For details, refer to the operating instruction of Wireless router (Access point).

2 Press [OK].

* Wi-Fi Protected Setup-compatible Wireless router (Access point) may have the mark.

Search for access point:

Available Wireless routers (Access points) are searched and listed. You can select the one to use from the list.

1 Press [ 3 , 4 ] to select SSID of Wireless router (Access point) you want to connect with. Then press [OPTION] to show information of the selected router, make a note of the authentication and encryption type.

Access Point Connection Setting

Select an access point to connect with.

To search for access point again, please select "Search again" below.

SSID

XXXXXXXXXX

XXXXXXXXXX

XXXXXXXXXX

XXXXXXXXXX

XXXXXXXXXX

XXXXXXXXXX

Reception

:XXXXXXXXXXXXXXX

:802.11n/g/b (2.4GHz)

:WPA-PSK

:AES

XXXXXXXXXX

Search again

≥ If you can not find the SSID, select “Search again”.

2 Press [RETURN] and then press [OK].

Then select an item on the following screen which corresponds to the authentication type noted down in step

1 above.

Access Point Connection Setting

Select authentication type.

WPA2-PSK (AES/TKIP)

WPA-PSK (AES/TKIP)

Open/Shared Key (WEP)

Open system

Follow the on-screen instructions to make the settings.

≥ Input your encryption key code in “Encryption Key” supplied with your Wireless router (Access point).

DMP-BD85GN&GA&GC-VQT2H83_eng.book 13 ページ 2010年2月5日 金曜日 午後12時39分

When you experience problems with settings

Access Point Connection Setting

Access Point Connection Setting

Failed to connect to the access point.

A conflict with other devices occurred.

Do you wish to setup Access Point

Connection Setting again ?

1. LAN cable connection or

Connection to access point

2. IP address setting

3. Connection to gateway

1. LAN cable connection or

Connection to access point

:Pass

:Fail

:Fail

:Pass

2. IP address setting

:Home network available

:Fail 3. Connection to gateway

1. LAN cable connection or

Connection to access point

2. IP address setting

3. Connection to gateway

:Pass

:Pass

:Fail

≥ Connection and settings of the hub and router

≥ Settings of

“IP Address /

DNS

Settings”

( > 31)

OK

Yes No

Display

A conflict with another device occurred.

Check the following

≥ Please wait a few moments, and then try again.

A time out error occurred.

An authentication error or a time out error occurred.

≥ Setting of the Wireless router

(Access point) for MAC Address etc.

≥ The signal may be weak. Using the supplied USB extension cable, adjust the position of the

Wireless LAN Adaptor. Do not use any other USB extension cables except the supplied one.

≥ The SSID and the encryption key of the Wireless router

(Access point).

≥ Please wait a few moments, and then try again.

A device error occurred.

≥ Connection of Wireless LAN

Adaptor

If there is no improvement in symptom, consult your dealer.

Network Easy Setting (Connection Test)

Network Easy Setting (Connection Test)

Complete.

1. LAN cable connection

2. IP address setting

3. Connection to gateway

: Fail

: Fail

: Fail

LAN cable is not connected.

Please check the connection.

Select “Yes” and press [OK] to check network connection again.

Select “No” and press [OK] to finish Network

Easy Setting.

Yes

OK

No

Display

1. LAN cable connection or

Connection to access point

2. IP address setting

3. Connection to gateway

:Fail

:Fail

:Fail

Network Easy Setting (Internet Connection Test)

Network Easy Setting (Internet Connection Test)

Complete.

- Connection to the Internet : Fail(B019)

Failed the connection test.

Cannot find the server.(B019)

Please refer to the operating instructions for the cause of the error and the solution for it.

Press [OK].

OK

Check the following

≥ Connection of the LAN cables

( > 10)

Failed to connect to the server.

(B020)

Display

Cannot find the server.

(B019)

Check the following

≥ “Primary DNS” and “Secondary

DNS” settings of “IP Address /

DNS Settings” ( > 31)

≥ The server may be busy or the service may have been suspended. Please wait a few moments, and then try again.

≥ Settings of “Proxy Server

Settings” ( > 31) and the router

≥ Refer to the operating instructions of the hub or router.

≥ You can perform this setup anytime by selecting “Network Easy Setting” in the Setup menu. ( > 31)

≥ You can redo these settings individually using “Network Settings”. ( > 31)

≥ Do not connect to a wireless network for which you do not have usage rights. Wireless networks for which you do not have usage rights (SSID) may appear during the automatic search for a wireless network environment. However, if you connect, there is a risk that it will be regarded as illegal access.

≥ After performing network settings on this unit, the settings (encryption level, etc.) of the Wireless router (Access point) might change.

When you have trouble getting online on your PC, perform the network settings on your PC in accordance with the settings of Wireless router

(Access point).

13

VQT2H83

DMP-BD85GN&GA&GC-VQT2H83_eng.book 14 ページ 2010年2月5日 金曜日 午後12時39分

Network Easy Setting

For Middle East and Asia

After completing “Easy Setting”, you can continuously perform

“Network Easy Setting”.

Follow the on-screen instructions and make the settings with [

2

,

1

] and press [OK].

Network Easy Setting (Connection Check)

LAN setup and testing of home network and Internet connections are required for Internet functions

(BD-Live etc.).

Broadband Internet connection is necessary for

BD-Live.

Is a LAN cable already connected ?

Please refer to the operating instructions about network connection.

Press [OK] to proceed.

OK

RETURN

≥ When you experience problems ( > 13)

Firmware updating

Occasionally, Panasonic may release updated firmware for this unit that may add or improve the way a feature operates.

These updates are available free of charge.

This unit is capable of checking the firmware automatically when connected to the Internet via a broadband connection.

When a new firmware version is available, the following screen is displayed.

Firmware Update

Latest Online Version: x.xx

Current Installed Version: x.xx

Do you want to start firmware update?

For the update information, please visit the following website: http://panasonic.net/support/

Yes No

OK

RETURN

DO NOT DISCONNECT the unit from the AC power or perform any operation while the update takes place.

After the firmware is installed, “FINISH” will be displayed on the unit’s display. Unit will restart and the following screen will be displayed.

The firmware has been updated.

Current Installed Version : x.xx

OK

RETURN

≥ You can perform update anytime by selecting “Firmware Update” in the

Setup menu . ( > 31)

≥ If downloading on this unit fails or this unit is not connected to the

Internet, then you can download the latest firmware from the following website and burn it to a CD-R to update the firmware.

http://panasonic.jp/support/global/cs/

(This site is in English only.)

To show the firmware version on this unit. ( > 31, “System

Information”)

≥ Downloading will require several minutes. It may take longer or may not work properly depending on the connection environment.

≥ If you do not want to check for the latest firmware version, set “Automatic

Update Check” to “Off”. ( > 31)

14

VQT2H83

STEP 6 :

Reprogramming the remote control

For other Panasonic products

If you have more than one Panasonic player/recorder and the remote control operates both products at once, you will need to change the remote control code on one product to prevent this occurrence. After changing the remote control code on this product, you will need to change the code of the remote control. ( > 31, “Remote Control”)

For TV or amplifier/receiver

You can operate the TV or amplifier/receiver using the unit’s remote control.

1

For televisions

Input the 2-digit code (

>

40) with the numbered buttons while pressing [

Í

TV].

For amplifiers/receivers

Input the 2-digit code (

>

40) with the numbered buttons while pressing

[RECEIVER

j

VOL].

e.g., 01: [0] B [1]

2

Test by turning on the television or adjusting the volume of the amplifier/ receiver.

≥ If your television or amplifier/receiver brand has more than one code listed, select the one that allows correct operation.

DMP-BD85GN&GA&GC-VQT2H83_eng.book 15 ページ 2010年2月5日 金曜日 午後12時39分

Inserting or removing a media

FUNCTION menu

Major functions of this unit can be operated from the

FUNCTION menu.

Press [ 3 , 4 ] to select the item and press [OK].

Blu-ray Disc Player

FUNCTION MENU

BD-Video

Playback

Top Menu

SD CARD

≥ When inserting a media, ensure that it is facing the right way up.

≥ When indicator on this unit's display blinks, do not turn off the unit or remove the media. Such action may result in loss of the media's contents.

≥ When removing the SD card, press on the centre of the card and pull it straight out.

≥ If you connect a Panasonic product with a USB connection cable, setup screen may be displayed on connected equipment. For details, refer to the instructions for the connected equipment.

To switch drives

Press [DRIVE SELECT] to select “BD/DVD/CD”, “SD card” or “USB device”.

≥ If a media is inserted while the unit is stopped, the drive switches automatically depending on the inserted media.

Network

SD card

USB device

To Others

OK

RETURN

Playback

Top Menu

Menu

Viewing Picture

Viewing Video

Listening Music

Play back the contents.

( > 16)

( > 16)

( > 20)

( > 16)

( > 21)

[For[Australia[and[New[Zealand]

Home Network (DLNA)( > 24)

Internet Content: Displays the Home screen of the VIERA CAST ( > 23 )

Network

[For]Asia]and]Middle]East]

Displays the Home screen of the VIERA CAST

( > 23)

BD/DVD/CD

SD card

USB device

Switches to each drive.

To

Others

Playlists

Setup

Card

Management

(

You can play playlists created on DVD-VR.

( > 28)

> 18)

To exit the screen

Press [FUNCTION MENU].

≥ Items to be displayed may vary with the media.

≥ If FUNCTION screen is not displayed, press [FUNCTION MENU].

15

VQT2H83

DMP-BD85GN&GA&GC-VQT2H83_eng.book 16 ページ 2010年2月5日 金曜日 午後12時39分

Playing video contents

BD DVD CD SD USB

Preparation

Turn on the television and select the appropriate video input on the television.

1

1

Press [

Í

] to turn on the unit.

2

Insert the media.

Play starts.

≥ If the menu is displayed, press [ 3 , 4 , 2 , 1 ] to select the item and press [OK].

≥ If play does not start, press [ 1 ] (PLAY).

To show menus

You can display Top Menu, DIRECT NAVIGATOR or Pop-up

Menu.

Press [TOP MENU/DIRECT NAVIGATOR] or [POP-UP

MENU].

≥ Press [ 3 , 4 , 2 , 1 ] to select the item and press [OK].

≥ Pop-up menu also appears by pressing [OPTION] and selecting “Pop-up Menu”.

To show the status messages

While playing, press [STATUS].

The status messages give you information about what is currently being played. Each time you press [STATUS], the display information may change or will disappear from the screen.

e.g.BD-Video

T: Title, C: Chapter, PL: Playlist

Elapsed time in the title

 T1 C1 0:05.14

0:20.52

BD-Video

PLAY

Current position Total time

≥ Signal from PAL discs is output as PAL. Signal from NTSC discs is output as “NTSC” or “PAL60”. You can select “NTSC” or “PAL60” in “NTSC

Contents Output” for NTSC discs. ( > 29)

≥ DISCS CONTINUE TO ROTATE WHILE MENUS ARE DISPLAYED.

Press [ ∫ ] when you have finished playback to protect the unit’s motor, your television screen and so on.

≥ Depending on media and contents, the display may change or may not appear.

≥ DivX: Successive play is not possible.

≥ It is not possible to playback AVCHD and MPEG2 video which have   been dragged and dropped, copied and pasted to the media.

Other operations during play

These functions may not work depending on the media and contents.

Stop

Press [ ∫ ].

The stopped position is memorized.

Resume play function

Press [ 1 ] (PLAY) to restart from this position.

≥ The position is cleared if the tray is opened or you press [ ∫ ] several times to display “STOP” on unit’s display.

≥ On BD-Video discs including BD-J ( > 41), the resume play function does not work.

Pause

Press [ ; ].

≥ Press [ ; ] again or [ 1 ] (PLAY) to restart play.

Search/Slow-motion

Search

While playing, press [ 6 ] or [ 5 ].

≥ Music and MP3: The speed is fixed to a single step.

Slow-motion

While paused, press [ 6 ] or [ 5 ].

≥ BD-Video and AVCHD: Forward direction [ 5 ] only.

The speed increases up to 5 steps.

≥ Press [ 1 ] (PLAY) to revert to normal playback speed.

Skip

While playing or paused, press [ : ] or [ 9 ].

Skip to the title, chapter or track you want to play.

≥ Each press increases the number of skips.

Frame-by-frame

While paused, press [ 2 ] ( 2; ) or [ 1 ] ( ;1 ).

≥ Press and hold to change in succession forward or backward.

≥ Press [ 1 ] (PLAY) to revert to normal playback speed.

≥ BD-Video and AVCHD: Forward direction [ 1 ] ( ;1 ) only.

Changing audio

Press [AUDIO].

You can change the audio channel number or soundtrack language ( > 26), etc.

16

VQT2H83

DMP-BD85GN&GA&GC-VQT2H83_eng.book 17 ページ 2010年2月5日 金曜日 午後12時39分

Enhancing the brilliance of audio playback

(Discs recorded at 48 kHz or less)

Press [RE-MASTER] to select an item.

This feature gives you brighter sound by increasing the high frequency portion of the audio.

Recommended setting

Re-master 1

Re-master 2

Re-master 3

Pop and rock

Jazz

Classical

≥ This function is effective for audio from the HDMI terminal or the COAXIAL

/OPTICAL terminal only when “Digital Audio Output” is set to “PCM”

( > 29). (However, in this case, audio is output as 2ch from the COAXIAL /

OPTICAL terminal.)

Useful functions

1

Press [OPTION].

2

Select an item, then press [OK].

While DIRECT NAVIGATOR screen is displayed

Properties

To display the title properties (recording date, etc.)

Chapter

View

To select the chapter

To Picture

Folder

Playing still pictures ( > 20)

To switch to another folder

While playing

Screen

Aspect

When black bars are shown at the top and bottom or left and right sides of the screen, you can enlarge the image to fill the screen.

To display Top Menu.

Top Menu

Pop-up

Menu

Menu

To display Pop-up Menu.

To display Menu.

≥ Depending on the played contents if you perform “Screen

Aspect”, there may be not effect.

≥ When “TV Aspect” ( > 30) is set to “4:3 Pan & Scan” or “4:3

Letterbox”, the “Zoom” effect in “Screen Aspect” is disabled.

≥ Depending on the media and contents, displayed items are different.

17

VQT2H83

DMP-BD85GN&GA&GC-VQT2H83_eng.book 18 ページ 2010年2月5日 金曜日 午後12時39分

Enjoying BD-Live or

BONUSVIEW in BD-Video

What is BONUSVIEW?

BONUSVIEW allows you to enjoy functions such as picture-in-picture or secondary audio etc.

What is BD-Live?

In addition to the BONUSVIEW function, BD-Live allows you to enjoy more functions such as subtitles, exclusive images and online games by connecting this unit to the Internet.

]

≥ The usable functions and the operating method may vary with each disc, please refer to the instructions on the disc and/or visit their website.

Playing picture-in-picture

To turn on/off secondary video

Press [PIP].

Secondary video

Enjoying BD-Live discs with

Internet

Some BD-Live content available on the Blu-ray discs may require an Internet account to be created in order to access the BD-Live content. Follow the screen display or instruction manual of the disc for information on acquiring an account.

1

Connect to the network. (

>

10)

2

Insert an SD card

(with 1 GB or more free space).

SD card is used as the local storage ( > 41).

3

Insert the disc.

Deleting data/Formatting SD cards

There are various functions in BD-Video that you can enjoy by copying data to the SD card. If you no longer need data recorded on the SD card, you can delete data with the following operation.

1 Insert an SD card.

2 Press [FUNCTION MENU].

3 Press [ 3 , 4 ] to select “To Others” and press [OK].

4 Press [ 3 , 4 ] to select “Card Management” and press

[OK].

5 Press [ 3 , 4 ] to select “BD-Video Data Erase” or “Format

SD Card” and press [OK].

Card Management

SD CARD

No. of Files 6

Free space 300 MB

BD-Video Data Erase

Format SD Card

Primary video

To turn on/off secondary audio

[DISPLAY]

>

select “Disc”

>

[

1

]

>

select

“Signal Type”

>

[OK]

>

set “Soundtrack” in

“Secondary Video” to “On” or “Off”

≥ During search/slow-motion or frame-by-frame, only the primary video is displayed.

≥ When “BD-Video Secondary Audio” in “Digital Audio Output” is set to “Off”, secondary audio will not be played ( > 29).

OK

RETURN

Format this SD Card.

6 Press [ 2 , 1 ] to select “Yes” and press [OK].

7 Press [ 2 , 1 ] to select “Start” and press [OK].

≥ To use the above functions, it is recommended that you format the card on this unit. If the SD card you use is formatted, all data on the card will be erased. It cannot be recovered.

≥ “BD-Live Internet Access” may need to be changed for certain discs

( > 28).

≥ When discs supporting BD-Live are played back, the player or disc IDs may be sent to the content provider via the Internet.

18

VQT2H83

VQT2H83~Body_mst.fm 19 ページ 2010年2月8日 月曜日 午後9時20分

Regarding DivX

ABOUT DIVX VIDEO:

DivX ® is a digital video format created by DivX, Inc. This is an official DivX Certified device that plays DivX video. Visit www.divx.com for more information and software tools to convert your files into DivX video.

ABOUT DIVX VIDEO-ON-DEMAND:

This DivX Certified ® device must be registered in order to play

DivX Video-on-Demand (VOD) content.

To generate the registration code, locate the DivX VOD section in the device setup menu.

Go to vod.divx.com with this code to complete the registration process and learn more about DivX VOD.

≥ It is not possible to playback DivX VOD content recorded on the USB device.

Display the unit’s registration code.

( > 31, “DivX Registration” in “General”)

DivX Registration

You must register this unit to play protected DivX videos.

The registration code is necessary to register this unit.

Registration Code: XXXXXXXXXX

Please register at www.divx.com/vod/

10 alphanumeric characters

∫ Displaying subtitles text

[Except\for\Asia[

You can display subtitles text on the DivX video disc on this unit.

This function has no relation to the subtitles specified in DivX standard specifications and has no clear standard. The operation might be different or it may not operate properly depending on the way the file was made or the state of this unit (playing, stopped, etc.).

Set “Subtitle” in “Disc” ( > 26 )

≥ DivX video files that do not display “Text” do not contain subtitles text.

≥ If the subtitles text are not displayed correctly, try changing the language settings. ( > 28)

≥ After playing DivX VOD content for first time, the registration code is not displayed.

≥ If you purchase DivX VOD content using a registration code different from this unit’s code, you will not be able to play this content. (“Authorisation Error.” is displayed.)

Cancel the unit’s registration.

( > 31, “DivX Registration” in “General”)

Press [ 2 , 1 ] to select “Yes” in “DivX Registration”.

Use the deregistration code to cancel the registration in www.divx.com.

Regarding DivX VOD content that can only be played a set number of times

Some DivX VOD content can only be played a set number of times. When you play this content, the remaining number of plays is displayed. You cannot play this content when the number of remaining plays is zero. (“Rental Expired.” is displayed.)

≥ The remaining number of plays decreases each time a program is played. However, when playing from the point where play was previously stopped, the remaining number of plays does not decrease due to the resume play function.

19

VQT2H83

DMP-BD85GN&GA&GC-VQT2H83_eng.book 20 ページ 2010年2月8日 月曜日 午後1時22分

Playing still pictures

BD DVD CD SD USB

(BD-RE, DVD-RAM/-R/-R DL, CD-R/RW, SD Card,

USB device)

1

Insert a disc, SD card or USB device.

If the menu is displayed, press [ 3 , 4 ] to select the item and press [OK].

2

BD-RE, DVD-RAM

Press [

3

,

4

,

2

,

1

] to select the album and press [OK].

Album View DIRECT NAVIGATOR

DVD-RAM(VR) Video

Picture

106_DVD

Total 8

2006 9 12

Total 13

OPTION

 Previous

OK

RETURN

Video

 Next

Picture

 Slideshow Page 02/02

Press OK to go to Picture View.

3

Press [

3

,

4

,

2

,

1

] to select the still picture and press [OK].

DIRECT NAVIGATOR

DVD-RAM(VR)

Picture View

0001

2006 9 12

0002 0003

Video Picture

0004

0006 0007 0008 0005

0009

Page 001/001

OPTION

Play

RETURN

Press [ 2 , 1 ] to display the previous or next still picture.

To show DIRECT NAVIGATOR screen or exit the screen

Press [TOP MENU/DIRECT NAVIGATOR].

To show the picture properties

While playing, press [STATUS] twice.

e.g. JPEG on DVD-RAM

Shooting date

Date 11.12.2007 Total 3/9

To exit the screen

Press [STATUS].

Useful functions

1

Press [OPTION].

2

Select an item, then press [OK].

While “Album View” or “Picture View” screen is displayed

Start Slide

Show

You can display still pictures one by one at a constant interval.

Slide Show

Setting

Display interval

Change the display interval.

Transition Effect

Set display method.

Repeat Play

Repeat slideshow.

Soundtrack

The MP3 that is recorded on the USB device or the music CD can be played back as background music during the slideshow.

Soundtrack Folder

A folder to playback can be selected when a

USB device with MP3 recorded is connected to this unit.

Select

Folder

Folder

To Video

To album view

Press [ 3 , 4 , 2 , 1 ] to select “Set” and press [OK].

To switch to another higher folder

≥ Only if there is a multiple number of higher folders recognizable

To select the still pictures in another folder

Playing video contents ( > 16)

To display album view.

While playing (except for slideshow)

Rotate

RIGHT

Rotate LEFT

Rotate the still picture.

Zoom out

Zoom in

Reduce the still picture

≥ This function is only available for small-sized still pictures.

Cancel “Zoom out”

≥ Depending on the media and contents, displayed items are different.

≥ When a still picture with large number of pixels is played, the display interval may become longer. Even if the setting is changed, the display interval may not become shorter.

≥ When both the music CD and the USB device with MP3 recorded is inserted to this unit, the music CD has a priority to be played back as background music.

20

VQT2H83

DMP-BD85GN&GA&GC-VQT2H83_eng.book 21 ページ 2010年2月5日 金曜日 午後12時39分

Playing music

DVD CD USB

(DVD-R/-R DL, music CD, CD-R/RW, USB device)

1

Insert a disc or USB device.

If the menu is displayed, press [ 3 , 4 ] to select the item and press [OK].

2

Press [

3

,

4

] to select the track and press

[OK].

DIRECT NAVIGATOR

CD

No.

01

02

03

04

05

Music list

0.09

Track1

5 Tracks / Total Play Time 20min54sec

Track Name

Track1

Track2

Track3

Track4

Track5

Play Time

4min30sec

3min41sec

4min30sec

3min11sec

5min 2sec

4.30

OPTION

Play

RETURN

“ ” indicates the track currently playing.

To show DIRECT NAVIGATOR screen or exit the screen

Press [TOP MENU/DIRECT NAVIGATOR].

Playing a track in another folder

While the “Music list” is displayed

Press [OPTION], press [

3

,

4

] to select

“Select Folder” and press [OK].

≥ You cannot select folders that contain no compatible tracks.

21

VQT2H83

DMP-BD85GN&GA&GC-VQT2H83_eng.book 22 ページ 2010年2月5日 金曜日 午後12時39分

Linked operations with the TV

(VIERA Link “HDAVI Control

”)

What is VIERA Link “HDAVI Control”?

VIERA Link “HDAVI Control” is a convenient function that offers linked operations of this unit, and a

Panasonic TV (VIERA) or other device under “HDAVI

Control”.

You can use this function by connecting the equipment with an HDMI cable. See the operating instructions for connected equipment for operational details.

Preparation

1 Set “VIERA Link” to “On” ( > 30).

(The default setting is “On”.)

2 Set the “HDAVI Control” operations on the connected equipment (e.g., TV).

3 Turn on all “HDAVI Control” compatible equipment and select this unit’s input channel on the connected TV so that the “HDAVI Control” function works properly.

Also when the connection or settings are changed, repeat this procedure.

Automatic input switching

Power on link

When the following operations are performed, the television will automatically switch the input channel and display the corresponding action. When the television is off, the television will automatically turn on.

– When play starts on the unit

– When an action that uses the display screen is performed

(e.g., DIRECT NAVIGATOR screen)

Power off link

All connected equipment compatible with “HDAVI Control”, including this unit, automatically turns off when you switch the television off.

Playing music continuously even after turning off power to the television

When the unit is connected to a Panasonic TV (VIERA) that supports HDAVI Control 2 or later and an amplifier/receiver supports VIERA Link.

1 While playing music

Press [OPTION].

2 Press [ 3 , 4 ] to select “TV Power” and press [OK].

Easy control only with VIERA remote control

Only TV supports “HDAVI Control 2” or later

By using the TV remote control, you can play discs using the

“Control Panel” and display the Top Menu or Pop-up Menu, etc.

1

2

Press [OPTION].

Select an item, then press [OK].

Control Panel

Screen Aspect

Top Menu

Pop-up Menu

OPTION

OK

RETURN

≥ The OPTION menu may not appear while the Top Menu for

BD-Video or DVD-Video is displayed.

≥ The buttons that you can use for this unit vary depending on the TV. For details, refer to the operating instructions of the TV.

≥ The operation of this unit may be interrupted when you press incompatible buttons on the TV remote control.

≥ This unit supports “HDAVI Control 5” function.

“HDAVI Control 5” is the newest standard (current as of December, 2009) for Panasonic’s HDAVI Control compatible equipment. This standard is compatible with Panasonic’s conventional HDAVI equipment.

≥ VIERA Link “HDAVI Control”, based on the control functions provided by

HDMI which is an industry standard known as HDMI CEC (Consumer

Electronics Control), is a unique function that we have developed and added. As such, its operation with other manufacturers’ equipment that supports HDMI CEC cannot be guaranteed.

≥ Please refer to individual manuals for other manufacturers’ equipment supporting VIERA Link function.

22

VQT2H83

DMP-BD85GN&GA&GC-VQT2H83_eng.book 23 ページ 2010年2月5日 金曜日 午後12時39分

Enjoying VIERA CAST

You can access a selection of Internet services from the

Home screen with VIERA CAST, for example YouTube,

Picasa Web Albums. (Current as of December 2009)

Preparation

≥ Network connection ( > 10)

≥ Network setting ( > 12)

1

Press [VIERA CAST].

Message is displayed. Please read these instructions carefully and then press [OK].

2

Press [

3

,

4

,

2

,

1

] to select the item and press [OK].

Operable buttons:

[ 3 , 4 , 2 , 1 ], [OK], [RETURN], coloured buttons, numbered buttons

VIERA CAST Home screen;

London, United Kingdom

3 °

Weather

WSW 21 km/h

COMING SOON Setup

≥ In the following cases, settings are possible using “Internet Content

Settings” ( > 31)

–When restricting the use of VIERA CAST.

–When the audio is distorted.

–When wrong time is displayed

≥ If using slow Internet connection, the video may not be displayed correctly. A high-speed Internet service with a speed of at least 6 Mbps is recommended.

≥ Be sure to update the firmware when a firmware update notice is displayed on the screen. If the firmware is not updated, you will not be able to use the VIERA CAST ™ function. ( > 14)

≥ VIERA CAST ™ home screen is subject to change without notice.

≥ The services through VIERA CAST ™ are operated by their respective service providers, and service may be discontinued either temporarily or permanently without notice. Therefore, Panasonic will make no warranty for the content or the continuity of the services.

≥ All features of websites or content of the service may not be available.

≥ Some content may be inappropriate for some viewers.

≥ Some content may only be available for specific countries and may be presented in specific languages.

Featured Videos

COMING

SOON

Featured Photos

COMING

SOON

Bloomberg

TELEVISION

XXX

XXX

XXX

7465.95

778.94

1442.82

15min. delay

-89.68

-9.47998

-25.15

Images are for illustration purposes, contents may change without notice.

To return to VIERA CAST Home screen

Press [VIERA CAST].

To exit from VIERA CAST

Press [EXIT], [FUNCTION MENU] or [TOP MENU/DIRECT

NAVIGATOR].

23

VQT2H83

DMP-BD85GN&GA&GC-VQT2H83_eng.book 24 ページ 2010年2月8日 月曜日 午後1時22分

DLNA feature

[For[Australia[and[New[Zealand]

You can enjoy viewing video and pictures saved on a DLNA

Certified media server (such as a PC with Windows 7 installed etc.) connected to the home network with this unit.

You also can enjoy viewing them with Panasonic DLNA compatible recorders (DIGA).

≥ The countries where DIGA is available are limited. Refer to following site for availability.

http://panasonic.jp/support/global/cs/

≥ For the operation of equipment connected to the network, refer their respective operating instructions.

Preparation

1 Perform network connection ( > 10) and network setting

( > 12).

2 Connect a DLNA Certified media server to the network.

Viewing of video and pictures on the equipment connected to this unit via the network

1

Press [FUNCTION MENU].

2

Press [

3

,

4

] to select “Network” and press [OK].

3

Press [

3

,

4

] to select “Home Network

(DLNA)” and press [OK].

≥ A list of equipment connected via the network is displayed.

≥ This list can be updated by pressing the red button on the remote control.

e.g.

Home Network (DLNA)

DIGA DIGA

PC name

Internet

Broadband router, Wireless router

(Access point), etc.

LAN Cable

(Straight)

OK

RETURN

Update

Servers found on the network are displayed.

Please select one.

4

Press [

3

,

4

] to select the equipment to playback the contents, and press [OK]

5

Press [

3

,

4

,

2

,

1

] to select the item to playback (folder), and press [OK]

≥ Menu structure will be different depending on the equipment connected to this unit. Select the contents by repeating the operation.

≥ Control Panel is displayed once the playback starts.

Operation can be performed with [ 3 , 4 , 2 , 1 ], [OK],

[RETURN] and [EXIT].

Control Panel e.g.

Exit

DLNA Certified media server

When connected to a Panasonic DLNA compatible recorder (DIGA)

Perform the Home Network (DLNA) setup.

When a message requesting operation of the equipment to be registered is displayed, perform the operations in steps

1-4 of “Viewing of video and pictures on the equipment connected to this unit via the network” ( > right).

≥ Press [OK] if the Control Panel is not displayed.

≥ Discs or music cannot be played back. Also, depending on the equipment, playback of pictures may not be possible.

≥ Items displayed in grey on the display cannot be played back by this unit.

≥ This unit cannot be played back via connected equipment.

≥ Depending on the performance of the connected PC, video frames may be dropped during playback, or it may not playback at all.

24

VQT2H83

DMP-BD85GN&GA&GC-VQT2H83_eng.book 25 ページ 2010年2月5日 金曜日 午後12時39分

Useful functions for when playing back pictures

The following operations are possible when playing back pictures from connected equipment.

While picture list screen or folder with picture list screen is displayed

1 Press [OPTION].

2 Select an item, then press [OK].

Start

Slideshow

Slideshow

Settings

You can display still pictures one by one at a constant interval.

Display interval

Change the display interval.

Repeat Play

Repeat slideshow.

Press [ 3 , 4 , 2 , 1 ] to select “Set” and press [OK].

While playing

1 Press [OPTION].

2 Select an item, then press [OK].

Show the picture properties ( > 20).

Status

Rotate

RIGHT

(except for slideshow)

Rotate LEFT

(except for slideshow)

Rotate the still picture.

25

VQT2H83

DMP-BD85GN&GA&GC-VQT2H83_eng.book 26 ページ 2010年2月5日 金曜日 午後12時39分

Playback menu

1

Press [DISPLAY].

e.g., BD-Video

Disc

Play

Picture

Sound

Signal Type

Subtitle

Subtitle Style

Off

-

Main

Angle

1ENG

-

Menus Items Settings

2

Press [

3

,

4

] to select the menu and press

[

1

].

3

Press [

3

,

4

,

2

,

1

] to select the item and press [

1

].

4

Press [

3

,

4

] to select the setting.

Some items can be changed by pressing [OK].

To exit the screen

Press [DISPLAY].

Depending on the condition of the unit (playing, stopped, etc.) and media contents, there may be some items that you cannot select or change.

Regarding Language, Audio attribute and video attribute:

( > 40)

Disc

Signal Type

Primary Video

Video

The recording method of original video appears.

Soundtrack Select the type of audio or language.

Secondary Video

Video

Select on/off of images. The recording method of original video appears.

Soundtrack Select on/off of audio and the language.

Video

The recording method of original video appears.

Soundtrack

Show or change the soundtrack.

Subtitle

Turn the subtitle on/off, and change the language depending on the media.

Subtitle Style

Select the subtitle style.

Audio channel

Select the audio channel number.

( > 16, Changing audio)

Angle

Select the number of the angle.

Some items may be changed only on the disc specific menu.

( > 16)

Play

Repeat Play

(Only when the elapsed time is being displayed on the unit’s display.)

Select the item which you want to repeat. The items displayed differ depending on the type of media.

Select “Off” to cancel.

Random

Select whether or not to play random.

Playback Information Window

Displays the following.

*&/+

Audio/video attribute information of disc.

Settings status of “Digital Audio Output“( > 29).

HDMI output information.

Press [RETURN] to exit.

26

VQT2H83

DMP-BD85GN&GA&GC-VQT2H83_eng.book 27 ページ 2010年2月5日 金曜日 午後12時39分

Picture

Mode

Select the picture quality mode during play.

≥ If you select “User”, you can make further adjustments.

Press [ 1 ] to select “Picture Adjustment” and press [OK].

≥ 3D NR: Reduces the rough noise in the background to give a greater feeling of depth.

When “24p Output” is set to “On”, this function may not operate. ( > 30)

≥ Integrated NR: Smoothes block noise and reduces the smudging that appears around contrasting sections of the picture.

Advanced Settings

Chroma Process

The high-resolution processing of HDMI chroma signals produces a high-resolution picture with rich picture quality.

Detail Clarity

The picture is sharp and detailed.

Progressive

Select the method of conversion for progressive output to suit the type of material being played.

≥ If the video is disrupted when "Auto" is selected, select either "Video" or "Film" depending on the material to be played back.

24p

Movies and other material recorded on DVD-Video at 24p are output at 24p.

≥ Only when you have selected “On” in “24p Output” ( > 30) and play discs recorded at a rate of 60 fields per second.

Sound

Sound Effects

*1 *2

Select the sound effect.

≥ Digital Tube Sound :

This feature gives you warm sound, like that produced by a vacuum tube amplifier.

≥ Re-master : ( > 17)

≥ Night Surround :

Enjoy a movie with powerful sound even when the volume is kept low at night. The audio is set in such a way that it can be heard easily.

Dialog Enhancer

*2

The volume of the centre channel is raised to make dialog easier to hear.

High Clarity Sound

When connected to TV via HDMI terminal for outputting image, it produces clearer sound.

≥ Only when you have selected “Enable” in “High Clarity

Sound”. ( > 29)

*1

*2

Not every function can be set individually.

This function is effective for audio from the HDMI terminal or the COAXIAL

/OPTICAL terminal only when “Digital Audio Output” is set to “PCM”

( > 29). (However, in this case, audio is output as 2ch from the COAXIAL /

OPTICAL terminal.)

27

VQT2H83

VQT2H83~Body_mst.fm 28 ページ 2010年2月8日 月曜日 午後9時21分

Setup menu

Change the unit’s settings if necessary. The settings remain intact even if you switch the unit to standby.

1

Press [FUNCTION MENU] and press [

3

,

4

] to select “To Others” and press [OK].

2

Press [

3

,

4

] to select “Setup” and press

[OK].

Setup

Disc

Picture

Sound

Display

TV / Device Connection

Network

General

OK

RETURN

3

Press [

3

,

4

] to select the menu and press

[OK].

4

Press [

3

,

4

] to select the item and press

[OK].

If there are any other items, repeat these steps.

5

Press [

3

,

4

,

2

,

1

] to select the option and press [OK].

≥ There may be differences in operation methods. If this happens, follow the on-screen instructions for the operation.

About the password

The following items use the same password.

Don’t forget your password.

≥ “DVD-Video Ratings”

≥ “BD-Video Ratings”

≥ “Lock” ( > 31)

Disc

DVD-Video Ratings

Set a ratings level to limit DVD-Video play.

≥ Follow the on-screen instructions. Enter the 4-digit password with the numbered buttons when the password screen is shown.

BD-Video Ratings

Set an age limit of BD-Video play.

≥ Follow the on-screen instructions. Enter the 4-digit password with the numbered buttons when the password screen is shown.

Soundtrack Preference

Choose the language for audio.

≥ If “Original” is selected, the original language of each disc will be selected.

≥ Enter a code ( > 40) with the numbered buttons when you select “Other ¢¢¢¢ ”.

Subtitle Preference

Choose the language for subtitle.

≥ If “Automatic” is selected and the language selected for

“Soundtrack Preference” is not available, subtitles of that language will automatically appear if available on that disc.

≥ Enter a code ( > 40) with the numbered buttons when you select “Other ¢¢¢¢ ”.

Menu Preference

Choose the language for disc menus.

≥ Enter a code ( > 40) with the numbered buttons when you select “Other ¢¢¢¢ ”.

BD-Live Internet Access (

>

18)

You can restrict Internet access when BD-Live functions are used.

≥ If “Limit” is selected, Internet access is permitted only for

BD-Live contents which have content owner certificates.

DivX Subtitle Text

[Except\for\Asia[

Select a suitable item according to the language used for DivX subtitles text ( > 19).

≥ This item is displayed only after playing back a file.

28

VQT2H83

DMP-BD85GN&GA&GC-VQT2H83_eng.book 29 ページ 2010年2月5日 金曜日 午後12時39分

Picture

Still Mode

Select the type of picture shown when you pause playback.

Automatic

Field

Frame

Automatically selects the type of picture shown.

Select if jittering occurs when “Automatic” is selected.

Select if small text or fine patterns cannot be seen clearly when “Automatic” is selected.

Seamless Play

The chapters segment in playlists are played seamlessly.

≥ Select “On”, when the picture freezes for a moment at the chapters segment in playlists.

NTSC Contents Output

Select PAL60 or NTSC output when playing NTSC discs.

Sound

Dynamic Range Compression

You can listen at low volumes but still hear dialog clearly.

(Dolby Digital, Dolby Digital Plus and Dolby TrueHD only)

≥ “Auto” is effective only when playing Dolby TrueHD.

Digital Audio Output (

>

35)

Press [OK] to show the following settings.

Dolby D/Dolby D +/Dolby TrueHD

DTS/DTS-HD

MPEG Audio

Select the audio signal to output.

≥ Select “PCM”, when the connected equipment cannot decode the respective audio format.

≥ Not making the proper settings may result in noise.

BD-Video Secondary Audio

Select whether to mix or not mix the primary audio and secondary audio (including the button click sound).

( > 18)

≥ If “Off” is selected, the unit outputs the primary audio only.

PCM Down Conversion

Select how to output audio with a sampling frequency of

96 kHz for the PCM output from the DIGITAL AUDIO OUT.

≥ If “On” is selected, the signals that are converted to 48 kHz are output.

≥ If “Off” is selected, and the connected equipment does not support 96 kHz, the sound will not be output normally.

≥ Signals are converted to 48 kHz despite the settings across in the following cases:

– when the signals have a sampling frequency of 192 kHz

– when the disc has copy protection

– when “BD-Video Secondary Audio” is set to “On”

Downmix

Select the downmix system of multi-channel to 2-channels sound.

≥ Select “Surround encoded”, when the connected equipment supports the virtual surround function.

≥ There is no effect on “Bitstream” via HDMI AV OUT and

DIGITAL AUDIO OUT.

≥ The audio will be output in “Stereo” in the following cases.

– AVCHD playback

– Playback of secondary audio (including the button click sound).

7.1ch Audio Reformatting

Surround sound with 6.1ch or less is automatically expanded and played back at 7.1ch.

≥ If “Off” is selected, sound is played over the original number of channels.

(Note that in the case of 6.1ch audio, playback will be at

5.1ch.)

Audio reformatting is enabled in the following cases:

≥ When you have selected “PCM” in “Digital Audio Output”.

≥ When the audio is Dolby Digital, Dolby Digital Plus, Dolby

TrueHD or LPCM.

High Clarity Sound

When connected to TV via HDMI terminal for outputting image, it produces clearer sound.

≥ Set to “Enable” and then set “High Clarity Sound” on the playback menu to “On”. ( > 27)

Audio Delay

Mis-sync between the video and audio is corrected by delaying the audio output.

Display

On-Screen Messages

Choose whether to show status messages automatically.

[For[Asia]

On-Screen Language

Choose the language for these menus and on-screen messages.

Screen Saver Function

This is to prevent burn-in on the screen.

≥ When this is set to “On”:

If there is no operation for 10 minutes or more, DIRECT

NAVIGATOR screen switches to FUNCTION screen automatically.

≥ While playing and pausing, etc., this function is not available.

≥ As for Music [CD-DA] or MP3, regardless of the setting, if there is no operation for a while, DIRECT NAVIGATOR screen switches to the other states automatically.

FL Display

Changes the brightness of the unit’s display.

≥ If “Automatic” is selected the display is dimmed during playback and bright except during playback.

29

VQT2H83

DMP-BD85GN&GA&GC-VQT2H83_eng.book 30 ページ 2010年2月5日 金曜日 午後12時39分

SD Card LED Control

Set the lighting method for the SD card LED.

≥ If “SD inserted” is selected, and this unit is turned on and

SD card is inserted, the lamp is lit.

Software Licence

Information about the software used by this unit is displayed.

TV / Device Connection

TV Aspect

Set to match the type of television connected.

When connected to a 4:3 aspect television and playing 16:9 ratio image:

4:3 Pan &

Scan

4:3

Letterbox

The sides are cut off so the picture fills the screen.

When playing BD-Video, video is output as “4:3

Letterbox”.

Black bands appear at the top and bottom of the picture.

When connected to a 16:9 widescreen television and playing 4:3 ratio image:

16:9

16:9 full

Video is displayed as a 4:3 ratio image in the centre of the screen.

Video is displayed as a horizontally stretched 16:9 image.

HDMI Connection

Press [OK] to show the following settings.

HDMI Video Mode

Select “On” when video is output from HDMI AV OUT terminal.

On

Off

Images are output from the HDMI terminal in the resolution set in “HDMI Video Format”.

Images are output in the resolution set in

“Component Resolution”.

HDMI Video Format

The items supported by the connected devices are indicated on the screen as “ ¢ ”. When any item without “ ¢ ” is selected, the images may be distorted.

≥ If “Automatic” is selected, automatically selects the output resolution best suited to the connected television.

≥ To enjoy high definition video up-converted to 1080p, you need to connect the unit directly to 1080p compatible

HDTV (High Definition Television). If this unit is connected to an HDTV through other equipment, the other must also be 1080p compatible.

24p Output

When this unit is connected to a TV supporting 1080/24p output using an HDMI cable, movies and other material recorded at 24p are output at 24p.

≥ When playing DVD-Video, set to “On” and then set “24p” in “Picture” ( > 27) to “On”

≥ When BD-Video images other than 24p are played, images are output at 60p.

30

VQT2H83

HDMI Colour Mode

This setting is for selecting colour-space conversion of the image signal when the unit is connected using an HDMI cable.

HDMI Audio Output

This setting selects whether or not to output audio from

HDMI.

≥ Select “Off” when the TV is connected to this unit via an

HDMI terminal, and this unit is also connected to other devices, such as an amplifier/receiver via a COAXIAL or an OPTICAL terminal.

VIERA Link

Set to use “HDAVI Control” function when connected with an HDMI cable to a device that supports “HDAVI Control”.

≥ Select “Off” when you do not want to use “HDAVI Control”.

Deep Colour Output

This setting is for selecting whether to use Deep Colour

Output when a television that supports Deep Colour is connected.

Contents Type Flag

Depending on the playback content, the TV will output adjusting to the optimal method when a TV that supports

Contents Type Flag is connected.

Component Resolution

This sets the video output resolution when using the component video terminal.

480i, 480p: When playing NTSC discs

576i, 576p: When playing PAL discs

≥ Even if you select “720p” or “1080i”, the video output resolution is restricted to “576p/480p” when DVD-Video discs, DivX and BD-Video discs recorded at a rate of 50 field per second are output from the COMPONENT VIDEO

OUT terminals.

Analog Audio Output

You can set the optimum multi-channel surround sound for your speakers from this unit when the settings cannot be adjusted from a connected amplifier/receiver with AUDIO

OUT terminals.

Select “2ch (Downmix) + 5.1ch” or “7.1ch” and press [OK], and then set the following options.

– Speaker presence and size (

L C R

SW

LS RS LB RB

)

– Delay time ( ms

0.0

)

– Channel balance ( dB

0.0

)

To finish the speaker setting

Press [ 3 , 4 , 2 , 1 ] to select “Complete” and press [OK].

TV System

Perform the setup so it matches the TV System of the connected TV.

≥ When NTSC contents are played, they are outputted in the signal format specified in the “NTSC Contents Output”, irrespective of the settings here.

VQT2H83~Body_mst.fm 31 ページ 2010年2月8日 月曜日 午後2時11分

Network

Network Easy Setting(

>

12)

Network Settings

Perform network-related settings individually.

Press [OK] to show the following settings.

[For[Australia[and[New[Zealand]

LAN Connection Mode

Select connection method.

[For[Australia[and[New[Zealand]

Access Point Connection Setting

This allows the Wireless router (Access point) and connection settings to be set and the current connection settings and connection state to be checked when a wireless connection is used.

Connection Setting

The Wireless router (Access point) connection wizard will be displayed.

Double Speed Mode Setting (2.4GHz)

When a 2.4 GHz wireless format is used, this setting sets the connection speed.

≥ If you connect using the "Double Speed Mode(40MHz)", two channels use the same frequency band, and there is consequently a greater risk of reception interference.

This can cause the connection speed to drop or the connection to become unstable.

IP Address / DNS Settings

This is for checking the state of the network connection and setting the IP address and DNS-related.

Press [OK] to show the respective setting.

≥ “Connection Speed Setting” is enabled only when

“Connection Speed Auto-Config” is turned “Off”.

Proxy Server Settings

This is for checking the state of connection with the Proxy server and performing settings.

Press [OK] to show the respective setting.

Internet Content Settings (

>

23) (VIERA CAST)

Press [OK] to show the following settings.

Lock

You can restrict the usage of VIERA CAST.

≥ Follow the on-screen instructions. Enter the 4-digit password with the numbered buttons when the password screen is shown.

Audio Auto Gain Control

Volume that is different depending on the contents is adjusted automatically to the standard volume while using the VIERA CAST.

≥ Depending on contents, this function effect will not work.

≥ Select “Off” when the audio is warped.

Time Zone

By selecting the time zone, it is possible to set the unit’s time to match your location.

≥ Some VIERA CAST contents require the time zone to be set. Set the time zone if necessary.

Summer Time

≥ Select “On” when using Daylight Saving time.

MAC Address

Displays the MAC address of this unit.

General

Remote Control

Change the remote control code if other Panasonic products react to this remote control.

Quick Start

Speed of startup from standby mode is increased.

≥ Internal control unit will be powered when it is set to “On” so compared to when the setting is“Off” the following will occur.

– Idle power consumption will increase. (about the power consumption > 39)

Easy Setting

You can execute basic settings (“On-Screen Language” [For[Asia] ,

“TV Aspect”, “Analog Audio Output”, “Quick Start”)

Default Settings

This returns all values in the Setup menu and the playback menu, except for “Remote Control”, “On-Screen Language” [For[Asia] ,

“IP Address / DNS Settings”, “Proxy Server Settings”, “Lock”,

“DVD-Video Ratings” and “BD-Video Ratings” to the default settings.

DivX Registration (

>

19)

You need this registration code to purchase and play DivX

Video-on-Demand (VOD) content.

System Information

Display firmware version of this unit.

[For[Australia[and[New[Zealand]

Also displays the wireless LAN module of your Wireless LAN

Adaptor.

Firmware Update (

>

14)

Press [OK] to show the following settings.

Automatic Update Check

When this equipment remains connected to the Internet, it will check for the latest firmware version when it is turned on and you can update it if necessary.

Update Now

You can update the firmware manually if a firmware update is available.

31

VQT2H83

DMP-BD85GN&GA&GC-VQT2H83_eng.book 32 ページ 2010年2月5日 金曜日 午後12時39分

Troubleshooting guide

Before requesting service, please perform the following steps.

Do you have the latest firmware installed?

Firmware updates may be released to correct operating irregularities that are discovered with certain movies.

( > 14)

4

Make the following checks.

If the problem remains unresolved, consult your dealer for instructions.

The following do not indicate a problem with this unit:

≥ Regular disc rotating sounds.

≥ Image disturbance during search.

Unit doesn’t respond to remote control or front panel buttons.

Press and hold [ Í /I] on the main unit for 3 seconds.

– If still unable to turn the unit off, disconnect the AC mains lead, wait 1 minute, then reconnect the AC mains lead.

Cannot eject disc.

The unit may have a problem.

1 While the unit is off, press and hold [OK], the yellow button and the blue button on the remote control at the same time for more than 5 seconds.

– “00 RET” is displayed on the unit’s display.

2 Repeatedly press [ 1 ](right) on the remote control or [ Í /I] on the unit until “06 FTO” is displayed on the unit's display.

3 Press [OK] on the remote control or [ < OPEN/CLOSE] on the unit.

General operation

To return to the factory preset.

¾ Select “Yes” in “Default Settings” in the Setup menu. ( > 31)

To return all settings to the factory preset.

¾ Reset the unit as follows:

1 While the unit is off, press and hold [OK], the yellow button and the blue button on the remote control at the same time for more than 5 seconds.

– “00 RET” is displayed on the unit’s display.

2 Repeatedly press [ 1 ](right) on the remote control or [ Í /I] on the unit until “08 FIN” is displayed on the unit's display.

3 Press and hold [OK] on the remote control or [ < OPEN/

CLOSE] on the unit for at least 3 seconds.

Power of this unit is turned off when the input for the TV is switched.

¾ This is a normal phenomenon when using VIERA Link

(HDAVI Control 4 or later). For details please read the operating instructions for the TV.

The remote control doesn’t work properly.

¾ The remote control and main unit are using different codes. If “SET 1” , “SET 2” or “SET 3” is displayed when a button is pressed on the remote control, change the code on the remote control. ( > 31)

¾ It may be necessary to set the manufacturer code or the remote control code again after changing the batteries for remote control. ( > 14)

The TV tuner mode is not displayed when the

TV is switched on.

¾ This phenomenon may occur, depending on the TV setting, when “Quick Start” is set to “On”.

– Depending on the TV, this phenomenon may be prevented by reconnecting the HDMI cable to a different HDMI input terminal or by changing the HDMI auto connection setting.

You have forgotten your ratings password.

You want to cancel the ratings level.

¾ The ratings level returns to the factory preset.

1 While the unit is on, press and hold [OK], the yellow button and the blue button on the remote control at the same time for more than 5 seconds.

– “00 RET” is displayed on the unit’s display.

2 Repeatedly press [ 1 ] (right) on the remote control or [ Í /

I] on the unit until “03 VL” is displayed on the unit's display.

3 Press [OK] on the remote control or [ < OPEN/CLOSE] on the unit.

Picture

The images from this unit do not appear on the television.

Picture is distorted.

¾ An incorrect resolution is selected in “Component

Resolution” or “HDMI Video Format”. Reset the setting as follows:

1 While the unit is on, press and hold [OK], the yellow button and the blue button on the remote control at the same time for more than 5 seconds.

– "00 RET” is displayed on the unit’s display.

2 Repeatedly press [ 1 ](right) on the remote control or [ Í /I] on the unit until “04 PRG” is displayed on the unit's display.

3 Press and hold [OK] on the remote control or [ < OPEN/

CLOSE] on the unit for at least 3 seconds.

Set the item again. ( > 30)

– When Dolby Digital Plus, Dolby TrueHD, and DTS-HD audio are not output in bitstream, select “Yes” in “Default Settings” and make proper settings. ( > 31)

¾ The unit and television are using different video systems.

While stopped, keep pressing [ ∫ ] and [ < OPEN/CLOSE] on the main unit for 5 or more seconds. The system switches from PAL to NTSC or vice versa.

¾ The system used on the disc doesn’t match your television.

– PAL discs cannot be correctly viewed on an NTSC television.

– This unit can convert NTSC signals to PAL60 for viewing on a PAL television (“NTSC Contents Output” in the

“Picture”).

Video is not output

.

¾ Set the “High Clarity Sound” in the playback menu to “Off” to use the COMPONENT VIDEO OUT terminal or the

VIDEO OUT terminal. ( > 27)

32

VQT2H83

DMP-BD85GN&GA&GC-VQT2H83_eng.book 33 ページ 2010年2月5日 金曜日 午後12時39分

Video is not output in high definition.

¾ Confirm that the “HDMI Video Mode”, “HDMI Video

Format”, and “Component Resolution” in the Setup menu are set properly. ( > 30)

¾ The video output resolution is restricted to “576p/480p” when DVD-Video discs, DivX and BD-Video discs recorded at a rate of 50 field per second are output from the COMPONENT VIDEO OUT terminals.

A black band is displayed around the edge of the screen.

The aspect ratio of the screen is abnormal.

¾ Confirm the “TV Aspect” is set properly. ( > 30)

¾ Adjust the aspect setting on the television.

(Adjustment using “Screen Aspect” ( > 17) on the unit is also possible.)

Audio

Cannot switch audio.

¾ When connecting an amplifier/receiver using a COAXIAL /

OPTICAL terminal or an HDMI terminal, you cannot switch the audio if “Digital Audio Output” is set to

“Bitstream”. Set “Digital Audio Output” to “PCM” or connect using AUDIO OUT terminal. ( > 9, 29)

Cannot hear the desired audio type.

¾ Check the connections and the “Digital Audio Output” settings. ( > 29)

¾ When the unit is connected to an amplifier/receiver with the AUDIO OUT terminal, set “Analog Audio Output”.

( > 30)

¾ To output audio from a device connected with an HDMI cable, set “HDMI Audio Output” to “On” in the Setup menu. ( > 30)

Still pictures (JPEG) do not playback normally.

¾ The images that were edited on the PC, such as

Progressive JPEG, etc., may not playback.

I can’t play back BD-Live.

¾ The SD card is write-protected. ( > 7)

¾ Confirm that this unit is connected to the broadband

Internet. ( > 10, 31)

¾ Confirm the “BD-Live Internet Access” settings. ( > 28)

¾ Confirm an SD Card is inserted into the SD Card slot.

( > 15)

Network

I can’t connect to the network.

¾ Confirm the network connection and settings. ( > 10, 31)

¾ Check the operating instructions for each device and connect accordingly.

[For[Australia[and[New[Zealand]

When using Wireless LAN connection, video from the DLNA Certified media server is not played back or video frames are dropped during playback.

¾ Higher transfer rate router such as 802.11n (2.4 GHz or 5

GHz) Wireless router (Access Point) may solve the problem. If you use 802.11n (2.4 GHz or 5 GHz) Wireless router (Access Point), it is necessary to set the encryption type to “AES”.

Simultaneous use with a microwave, cordless telephone etc. at 2.4 GHz may result in connection interruptions or other problems.

¾ On the “Access Point Connection Setting” screen ( > 31), the continuous lighting of at least 4 “Reception” indicators is the target for a stable connection. If 3 or fewer indicators are lit or the connection is being interrupted, change the position or angle of your Wireless router

(Access point) and see if the connection state improves. If there is no improvement, connect to a wired network and perform the “Network Easy Setting”( > 12) again.

Playback

Disc cannot be played.

¾ The disc is dirty. ( > 4)

¾ Check the region code.

The contents of the USB device cannot be read.

¾ USB devices connected using USB extension cable or a

USB hub may not be recognized by this unit.

[For[Australia[and[New[Zealand]

The supplied USB extension cable is available for use.

¾ If inserted during playback the USB device may not be recognized by this unit.

¾ If two USB devices are connected simultaneously, they will not be recognized by this unit.

[For[Australia[and[New[Zealand]

USB ports can be used simultaneously only with the supplied Wireless LAN Adaptor ( > 10).

33

VQT2H83

DMP-BD85GN&GA&GC-VQT2H83_eng.book 34 ページ 2010年2月5日 金曜日 午後12時39分

Messages

The following messages or service numbers appear on the television or unit’s display when something unusual is detected during startup and use.

On the television

Cannot play.

¾ You inserted an incompatible disc.

Cannot play on this unit.

¾ You tried to play a non-compatible image.

¾ Confirm “SD” on the unit’s display is not blinking and re-insert the card.

No disc is inserted.

¾ The disc may be upside down.

$

This operation is not available.

¾ Some operations are unsupported by the unit. For example;

– BD-Video: During playback, reverse slow-motion or reverse frame-by-frame is not possible.

IP address is not set.

¾ The “IP Address” in “IP Address / DNS Settings” is “---. ---.

---. ---”. Set the “IP Address”, “Subnet Mask”, and

“Gateway Address”. (Select the automatic address acquisition if necessary.)

[For[Australia[and[New[Zealand]

The current security setting of Wireless LAN is low. It is recommended to change the setting.

¾ Authentication type for the Wireless LAN is set to “Open system”, or the encryption type is set to “No encryption”. It is recommended to encrypt for safety reasons. For details, refer to the instructions of the Wireless router being used. Encryption is required when playing back video, etc., from DLNA compatible devices.

On the unit’s display

F99

¾ The unit fails to operate properly. Press [ Í /I] on the main unit for 3 seconds to switch the unit to standby, then switch back on.

HDMI ONLY

¾ Some BD-Video discs can only be output with HDMI.

NET

¾ Displays while VIERA CAST is starting up.

No PLAY

¾ There is a viewing restriction on a BD-Video or

DVD-Video. ( > 28)

No READ

¾ The media is dirty or badly scratched. The unit cannot play.

34

VQT2H83

PLEASE WAIT

¾ The unit is carrying out internal process.This is not a malfunction. You cannot operate the unit while “PLEASE

WAIT” is displayed.

REMOVE

¾ The USB device is drawing too much power. Remove the

USB device.

SET

(“  ” stands for a number.)

¾ The remote control and main unit are using different codes. Change the code on the remote control.

Press and hold [OK] and the indicated number button at the same time for more than 5 seconds.

U59

¾ The unit is hot.

The unit switches to standby for safety reasons. Wait for about 30 minutes until the message disappears.

Select a position with good ventilation when installing the unit. Do not block the ventilation hole on the rear and side of the unit.

U72

U73

¾ The HDMI connection acts unusually.

– Turn the unit and TV off.

– Disconnect the HDMI cable between the player and the

TV.

– Please use HDMI cables that have the HDMI logo.

– The connected equipment may not be compatible. If connecting through an amplifier/receiver, try connecting directly to the TV to see if message clears.

H



or F



(“  ” stands for a number.)

¾ There is something unusual.

¾ Check the unit using the troubleshooting guide. If the service number does not disappear, do the following.

1 Disconnect the plug from the household mains socket wait a few seconds, then reconnect it.

2 Press [ Í /I] to turn the unit on. (The unit may be fixed.)

If the service number does not disappear despite doing the above, request service from the dealer. Inform the dealer of the service number when requesting service.

START

¾ The system is being restarted during the firmware update.

Please do not turn off the unit

UPD

/

(“  ” stands for a number.)

¾ The firmware is being updated.

Please do not turn off the unit.

FINISH

¾ The firmware update is complete.

DMP-BD85GN&GA&GC-VQT2H83_eng.book 35 ページ 2010年2月5日 金曜日 午後12時39分

Audio Information

About audio from audio output terminal

The audio output differs depending on which terminals are connected to the amplifier/receiver, and the settings on the unit. ( > 29,

Digital Audio Output)

≥ The number of channels listed is the maximum possible number of output channels.

HDMI AV OUT/DIGITAL AUDIO OUT (Coaxial/Optical)

Terminal

“Dolby D/Dolby D +/Dolby

TrueHD”/“DTS/DTS-HD”

“BD-Video Secondary Audio”

“Bitstream” *1

“On” *3

HDMI AV OUT

“Off”

“PCM” *2

“On” *4 “Off”

DVD-Video : 5.1ch PCM

Dolby Digital/

Dolby Digital EX *5

Dolby Digital

BD-Video : 7.1ch PCM *7

Dolby Digital Plus/

Dolby TrueHD

7.1ch PCM

DTS Digital Surround/

DTS-ES *5

Outputs using original audio

DVD-Video : 5.1ch PCM

BD-Video : 7.1ch PCM *8

DTS Digital

Surround

DTS-HD High Resolution

Audio/

DTS-HD Master Audio

7.1ch LPCM 7.1ch PCM

7.1ch PCM *8

AUDIO OUT

Terminal

“BD-Video Secondary Audio”

Dolby Digital/

Dolby Digital EX

7.1ch AUDIO OUT

“On” *4 /“Off”

DVD-Video : 5.1ch

BD-Video : 7.1ch

*7

5.1ch AUDIO

OUT

“On”/“Off”

2ch AUDIO

OUT

“On”/“Off”

Dolby Digital Plus/

Dolby TrueHD

7.1ch

DTS Digital Surround/

DTS-ES

DTS-HD High Resolution

Audio/

DTS-HD Master Audio

7.1ch LPCM

DVD-Video : 5.1ch

BD-Video : 7.1ch

*8

7.1ch

*8

7.1ch

5.1ch

2ch

DIGITAL AUDIO OUT

“Bitstream” “PCM”

“On”/“Off” “On”/“Off”

Dolby Digital/

Dolby Digital

EX *6

Dolby Digital

DTS Digital

Surround/

DTS-ES *6

DTS Digital

Surround

Down-mixed

2ch PCM

Down-mixed 2ch PCM

*1

*2

*3

*4

*5

*6

*7

*8

When the connected equipment is not supported with these audio formats, the audio is output as Dolby Digital bitstream, DTS Digital Surround bitstream or down-mixed 2ch PCM (e.g., TV).

When the connected equipment is not supported with multi channel surround, the audio is output as down-mixed 2ch PCM.

When playing BD-Video without secondary audio or button click sound, the audio is output as the same format as if “BD-Video Secondary Audio” was set to

“Off”.

When playing BD-Video with secondary audio or button click sound, the audio is output as 5.1ch.

With PCM output, Dolby Digital EX becomes PCM audio decoded as Dolby Digital, DTS-ES recorded to DVD-Video becomes PCM audio decoded as DTS

Digital Surround, and DTS-ES recorded to BD-Video becomes PCM audio decoded as DTS-ES.

When “BD-Video Secondary Audio” is set to “On”, Dolby Digital EX is output as Dolby Digital and DTS-ES is output as DTS Digital Surround, however if playing BD-Video without secondary audio or button click sound, the audio is output as the original format.

When BD-Video is played and “7.1ch Audio Reformatting” is set to “Off”, the audio is output as 5.1ch.

The audio output is amplified from 5.1ch or 6.1ch to 7.1ch depending on the DTS, Inc. specifications.

35

VQT2H83

DMP-BD85GN&GA&GC-VQT2H83_eng.book 36 ページ 2010年2月5日 金曜日 午後12時39分

Recommended audio output setting

The settings of the audio output vary depending on the connected equipment. Refer to the table below and set each of items.

Press [FUNCTION MENU]

>

select “To Others”

>

“[OK]”

>

select “Setup”

>

“[OK]”

>

“Sound”

>

Set each item

For details of the each item, refer to page 29.

Setup menu

TV via HDMI *1

Example of connected equipment

Receiver with

HD audio *2 decoder via

HDMI

Receiver without

HD audio *2 decoder via

HDMI

Receiver via

COAXIAL or

OPTICAL

“Digital

Audio

Output”

“Dolby D/Dolby

D +/Dolby

TrueHD”

“DTS/DTS-HD”

“BD-Video

Secondary

Audio”

“PCM Down Conversion”

“PCM”

“PCM”

“Off”

“Bitstream”

“Bitstream”

“Off”

“PCM”

“PCM”

“Off”

“PCM”

“PCM”

“Off”

No effect No effect No effect “Off” *4

“Downmix”

“High Clarity Sound”

“Stereo”

“Enable”

No effect

“Disable” *6

No effect

“Disable” *6

“Stereo” *5

“Disable” *6

≥ Because underlined items are the factory presets, it is not necessary to change these settings.

*1

*2

*3

*4

*5

*6

If connected to TV via except HDMI, these settings have no effect.

HD audio: Dolby Digital Plus, Dolby TrueHD, DTS-HD High Resolution Audio and DTS-HD Master Audio

Set “Analog Audio Output” to “7.1ch” or “2ch (Downmix) + 5.1ch”. (Press [FUNCTION MENU]

>

“To Others”

>

“Setup”)

If the connected equipment that does not support 96 kHz, set to “On”.

If the connected equipment that supports the virtual surround function, set to “Surround encoded”.

When connected to TV via HDMI terminal for outputting image, set to “Enable”.

Receiver via analogue output *3

No effect

No effect

“Off”

No effect

No effect

“Disable” *6

36

VQT2H83

VQT2H83~Body_mst.fm 37 ページ 2010年2月8日 月曜日 午後9時55分

About MP3/JPEG/DivX/

AVCHD/MPEG2 files

MP3

File format

Extension

MP3

Files must have the extension “.mp3” or

“.MP3”.

Compression rate

32 kbps to 320 kbps

Sampling rate 44.1 kHz/48 kHz

Reference

ID3 tags: version 1, 2.2, 2.3, 2.4

(Only titles and the names of artists)

JPEG

File format

Extension

Picture resolution

JPEG

Files must have the extension “.jpg” or

“.JPG”.

between 34 k 34 and 8192 k 8192 pixels

(sub sampling is 4:2:2 or 4:2:0)

Reference

JPEG conforming DCF* is supported.

≥ MOTION JPEG and Progressive JPEG is not supported.

* Design rule for Camera File system: unified standard established by Japan Electronics and Information

Technology Industries Association (JEITA).

≥ DVD-RAM must conform to UDF 2.0.

≥ BD-RE must conform to UDF 2.5.

DivX

File format

Extension

DivX

Files must have the extension “.DIVX”,

“.divx”, “.AVI” or “.avi”.

Picture resolution

Up to 1920 k 1080 pixels

Reference

≥ DivX certified to play DivX video up to HD

1080p, including premium content.

Video

– Number of stream: Up to 1

– Codec: DIV3, DIV4, DIVX, DX50, DIV6

– FPS (Frame Per Second): Up to 60 fps

Audio

– Number of stream: Up to 8

– Format: MP3, MPEG, Dolby Digital

– Multi channel: Dolby Digital is possible.

MPEG multi is 2 ch conversion.

≥ GMC (Global Motion Compensation) is not supported.

≥ DVD-R and DVD-R DL must conform to UDF 1.02 without

ISO9660 and UDF 1.5 with ISO9660.

≥ BD-R must conform to UDF 2.5.

Subtitles text file of DivX

[Except\for\Asia[

File format

File format

Extension

Reference

Subtitles text file of DivX

MicroDVD, SubRip, or TMPlayer

Files must have the extension “.SRT”,

“.srt”, “.SUB”, “.sub”, “.TXT”, or “.txt”

≥ The DivX video file and subtitles text file are inside the same folder, and the file names are the same except for the file extensions.

≥ Depending on the methods used to create the file or the state of the recording, only parts of the subtitles may be displayed, or the subtitles may not be displayed at all.

AVCHD

File format

AVCHD format (V1.0) used on High

Definition Video Camera

(Panasonic and some other’s)

Codec MPEG-4 AVC/H.264

≥ Discs must conform to UDF 2.5.

MPEG2

File format

SD-Video format * used on Standard

Definition Video Camera

(Panasonic and some other’s)

Codec MPEG2

* SD-Video Entertainment Video Profile

≥ With certain recording states and folder structures, the play order may differ or playback may not be possible.

≥ CD-R, CD-RW : ISO9660 level 1 or 2 (except for extended formats), Joliet

This unit is compatible with multi-session.

This unit is not compatible with packet writing.

≥ DVD-R, DVD-R DL (except for AVCHD) : ISO9660 level 1 or 2 (except for extended formats), Joliet, UDF bridge (UDF 1.02/ISO9660)

This unit is not compatible with multi-session.

This unit is not compatible with packet writing.

37

VQT2H83

DMP-BD85GN&GA&GC-VQT2H83_eng.book 38 ページ 2010年2月5日 金曜日 午後12時39分

Structure of folders that can be played in this unit

You can play files on this unit by structure of folders as shown below. However depending on the method of writing data (writing software), play may not be in the order you numbered the folders.

: Folder which can be displayed with this unit

¢¢¢ : Numbers

XXX: Letters

*1

*2

*3

¢¢¢ : from 001 to 999

¢¢¢ : from 100 to 999

XXXXX: 5 figures

¢¢¢¢ : from 0001 to 9999

XXXX: 4 figures

Structures of still picture (JPEG) folders in DVD-R * 4 /DVD-R DL * 4 /CD-R * 5 /CD-RW * 5

Files inside a folder are displayed in the order they were updated or taken.

Root e.g.,

P0000001 .jpg

P0000002 .jpg

Folder A

P0000003 .jpg

P0000004 .jpg

P0000005 .jpg

Folder B

P0000006 .jpg

P0000007 .jpg

P0000008 .jpg

P0000009 .jpg

Folder C

P0000010 .jpg

P0000011 .jpg

P0000012 .jpg

in BD-RE * 6 /DVD-RAM * 4

≥ Folder structure is not displayed.

Root e.g.,

P0000001 .jpg

P0000002 .jpg

JPEG

DCIM



*1

 XXXXX

*2

XXXX  .jpg

*3

DCIM

 XXXXX

*2

XXXX  .jpg

*3 in SD card * 4 /USB device * 4

Displays JPEG files in all folders.

≥ Folder structure is not displayed.

Root e.g.,

P0000001 .jpg

P0000002 .jpg

DCIM



XXXXX

*2

XXXX  .jpg

Folder A

P0000003 .jpg

P0000004 .jpg

*3

Structure of MP3 folders in DVD-R/DVD-R DL/CD-R/CD-RW/USB device

Prefix the file names with 3-digit numbers in the order you want to play them.

Root e.g.,

001 XXXX .mp3

002 XXXX .mp3

001

Folder A

003 XXXX .mp3

004 XXXX .mp3

005 XXXX .mp3

Folder B

006 XXXX .mp3

007 XXXX .mp3

008 XXXX .mp3

009 XXXX .mp3

Folder C

010 XXXX .mp3

011 XXXX .mp3

012 XXXX .mp3

Structure of DivX folders in BD-R * 7 /DVD-R * 7 /DVD-R DL * 7 /CD-R * 7 /CD-RW * 7 /USB device * 7

Files inside a folder are displayed in the order they were updated or taken.

Root e.g.,

P0000001 .divx

P0000002 .divx

Folder A

P0000003 .divx

P0000004 .divx

P0000005 .divx

Folder B

P0000006 .divx

P0000007 .divx

P0000008 .divx

P0000009 .divx

Folder C

P0000010 .divx

P0000011 .divx

P0000012 .divx

*4

*5

*6

*7

The total combined maximum number of recognizable picture contents and folders: 3000 picture contents and 300 folders.

The total combined maximum number of recognizable picture contents and folders: 999 picture contents and 99 folders.

The total combined maximum number of recognizable picture contents and folders: 9999 picture contents and 300 folders.

The total combined maximum number of recognizable file contents and folders: 200 file contents and 300 folders.

38

VQT2H83

DMP-BD85GN&GA&GC-VQT2H83_eng.book 39 ページ 2010年2月8日 月曜日 午後1時22分

Specifications

Signal system:

Operating temperature range:

PAL/NTSC i 5 o C to i 35 o C

Operating humidity range:

10 % to 80 % RH (no condensation)

Video output: 1.0 Vp-p (75 ≠ )/Pin jack :1 system

Component video output (Y: green, P

B

: blue

,

P

R

: red):

Y :1.0 Vp-p (75 ≠ )/P

B

, P

R

: 0.7 Vp-p (75 ≠ )/

Pin jack:1 system

Audio output:

Number of connectors :

2 Vrms (1 kHz, 0 dB)/Pin jack

7.1 channel discrete output:1 system

(2 channel + 5.1 channel discrete output)

Digital audio output:

Optical digital output : Optical terminal

Coaxial digital output:Pin jack

HDMI AV output: Type A (19 pin)

HDMI (Deep Colour, x.v.Colour

™ , High Bit rate Audio)

This unit supports “HDAVI Control 5” function.

SD card slot:

USB slot:

Ethernet:

LASER Specification

Connector : 1 system

USB2.0 : 2 system

10BASE-T/100BASE-TX:1 system

Class 1 LASER Product:

Wave length:790 nm (CDs)/655 nm (DVDs)/405 nm (BDs)

Laser power: No hazardous radiation is emitted with the safety protection

Power supply: [For[Australia[and[New[Zealand]

AC 220 to 240 V, 50 Hz

Power consumption:

[For]Asia]and]Middle]East]

AC 220 to 240 V, 50 Hz/60 Hz

Approx. 27 W

Power consumption in standby mode: Approx. 0.2 W

Power consumption in quick start standby mode:Approx. 8.4 W

Dimensions (W k D k H) : Including the projecting parts

430 mm k 249 mm k 55 mm

Mass: Approx. 2.6 k g

[For[Australia[and[New[Zealand]

Wireless LAN Adaptor (DY-WL10)

Dimensions (W k D k H)

Mass:

Antenna:

Interface:

Standard Compliance:

44 mm k 72 mm k 27 mm

Approx. 29 g

Tx 1, Rx 2

USB2.0

IEEE802.11n / IEEE802.11a / IEEE802.11g / IEEE802.11b

Transmission system:

MISO-OFDM system, OFDM system, DSSS system

Frequency Range:

IEEE802.11n / IEEE802.11a:

5.15 GHz - 5.35 GHz / 5.47 GHz - 5.725 GHz/

5.725 GHz - 5.825 GHz

IEEE802.11g / IEEE802.11b / IEEE802.11n:

2.4 GHz - 2.4835 GHz

Transfer rate (standard)*:

IEEE802.11n: Tx Max. 150 Mbps, Rx Max. 300 Mbps

IEEE802.11g / IEEE802.11a:

Access Mode:

Security:

Max. 54 Mbps

IEEE802.11b: Max.

Infrastructure mode

WPA2-PSK (TKIP/AES)

WPA-PSK (TKIP/AES)

WEP (64 bit / 128 bit)

(This unit supports WPA and WPA2 encryption.)

* Transfer rates are theoretical values; however, actual communication rate will vary according to communication environment or connected equipment.

Product Identification Marking is located on the bottom of adaptor.

Specifications are subject to change without notice.

39

VQT2H83

DMP-BD85GN&GA&GC-VQT2H83_eng.book 40 ページ 2010年2月5日 金曜日 午後12時39分

Panasonic

TECHNICS

ADCOM

AIWA

ALPINE

ARCAM

BOSE

DENON

HARMAN

KARDON

JVC

KENWOOD

KLH

LG

LUXMAN

Supplemental information

TV Code

01/02/03/04

35

27/30

05/71/72/73/74

58/59

10/15

05

05

05

05

66

05

64/65

10/34

61

21

53

63/67

05/50/51

05

36

09

05/22/23/40/41

30

25

17/30/39/70

52

45

62

05/50/51

07/46

52

05/28

05/19/20/47

24

TV/Amplifier/Receiver code list

Brand

Panasonic

AIWA

AKAI

BEKO

BENQ

BRANDT

BUSH

CENTREX

CURTIS

DAEWOO

DESMET

DUAL

ELEMIS

FERGUSON

FINLUX

FISHER

FUJITSU

FUNAI

GOLDSTAR

GOODMANS

GRADIENTE

GRUNDIG

HITACHI

IRRADIO

ITT

JVC

KDS

KOLIN

KONKA

LG

LOEWE

MAG

METZ

MITSUBISHI

MIVAR

Brand TV Code

NEC

NOBLEX

NOKIA

NORDMENDE

OLEVIA

ONWA

ORION

PEONY

PHILCO

PHILIPS

PHONOLA

PIONEER

PROVIEW

PYE

RADIOLA

SABA

SALORA

SAMSUNG

SANSUI

SANYO

SCHNEIDER

SEG

SELECO

SHARP

SIEMENS

SINUDYNE

SONY

TCL

TELEFUNKEN

TEVION

THOMSON

TOSHIBA

WHITE

WESTINGHOUSE

YAMAHA

05

18/41

36

33

25/26/27/60/61

10

45

30/39/70

05

49/69

41/48/64

05/06/46

05

37/38

52

05

05

10

26

32/42/43/65/68

05

21/54/55/56

05/29/30

05/69/75/76/77/78

05/25

18

09

05

08

31/33/66/67/69

10/11/12/13/14

52

10/15/44

16/57

Brand

Amplifier/

Receiver Code

01/02/03

35

62

04/05/06/48/49

63

57/58

07

08/09/10/11/50/51/52

12

12

13/14

15/16/17

18

19

59

Brand

MARANTZ

MCINTOSH

NAD

NAKAMICHI

ONKYO

OUTLAW

PREAMP

PHILIPS

PIONEER

SAMSUNG

SONY

TEAC

THOMSON

YAMAHA

Amplifier/

Receiver Code

20/21

54

22/55

60/61

23

56

24/44

25/26/27/28

45/46/47

29/30/31

32/33/34

43/53

36/37/38/39/40/41/42

Video attribute

DIsplay

MPEG-2/MPEG-4 AVC/VC-1

480/576/720/1080

24p/50i/60i/50p/60p

YCbCr4:2:2/YCbCr4:4:4/RGB bps (bit per second)

Meaning

Video recording method

Video Format

Video Frame rate

Colour Space

Transfer rate of bit

Audio attribute

DIsplay Meaning

LPCM/ Digital/ Digital+/

TrueHD/DTS/DTS 96/DTS-HD HI RES/

DTS-HD MSTR/MPEG ch (channel) k (kHz) b (bit) bps (bit per second)

Signal type

Number of channels

Sampling frequency

Number of bits

Transfer rate of bit

Display languages list

DIsplay Language DIsplay Language DIsplay Language

ENG

FRA

DEU

ITA

ESP

NLD

SVE

NOR

DAN

POR

RUS

English

French

German

Italian

Spanish

Dutch

Swedish

Norwegian

Danish

Portuguese

Russian

JPN

CHI

KOR

MAL

VIE

THA

POL

CES

SLK

HUN

FIN

Japanese

Chinese

Korean

Malay

Vietnamese

Thai

Polish

Czech

Slovak

Hungarian

Finnish

ARA

HIN

PER

IND

MRI

BUL

RUM

GRE

TUR

Arabic

Hindi

Persian

Indonesian

Maori

Bulgarian

Romanian

Greek

Turkish

Others

Language code list

Language Code Language Code Language Code

Chinese:

Corsican:

Croatian:

Czech:

Danish:

Dutch:

English:

Esperanto:

Estonian:

Faroese:

Fiji:

Finnish:

French:

Frisian:

Galician:

Georgian:

German:

Greek:

Greenlandic:

Guarani:

Abkhazian 6566

Afar: 6565

Afrikaans:

Albanian:

Amharic:

6570

8381

6577

Arabic:

Armenian:

Assamese:

Aymara:

Azerbaijani:

Bashkir:

6582

7289

6583

6589

6590

6665

Basque:

Bengali; Bangla:

6985

6678

Bhutani:

Bihari:

Breton:

6890

6672

6682

Bulgarian:

Burmese:

6671

7789

Byelorussian: 6669

Cambodian:

Catalan:

7577

6765

9072

6779

7282

6783

6865

7876

6978

6979

6984

7079

7074

7073

7082

7089

7176

7565

6869

6976

7576

7178

Gujarati:

Hausa:

Hebrew:

Hindi:

Hungarian:

Icelandic:

Indonesian:

Interlingua:

Irish:

Italian:

Japanese:

Javanese:

Kannada:

Kashmiri:

Kazakh:

Kirghiz:

Korean:

7487

7578

7583

7575

7589

7579

Kurdish:

Laotian:

Latin:

7585

7679

7665

Latvian, Lettish: 7686

Lingala: 7678

Lithuanian: 7684

Macedonian: 7775

Malagasy: 7771

7185

7265

7387

7273

7285

7383

7378

7365

7165

7384

7465

Malay:

Malayalam:

Maltese:

Maori:

Marathi:

Moldavian:

7783

7776

7784

7773

7782

7779

Mongolian:

Nauru:

Nepali:

7778

7865

7869

Norwegian:

Oriya:

7879

7982

Pashto, Pushto: 8083

Persian:

Polish:

Portuguese:

Punjabi:

Quechua:

7065

8076

8084

8065

8185

Telugu:

Thai:

Tibetan:

Tigrinya:

Tonga:

Turkish:

Turkmen:

Twi:

Ukrainian:

Urdu:

Uzbek:

Vietnamese:

Volapük:

Welsh:

Wolof:

Xhosa:

Yiddish:

Yoruba:

Zulu:

Rhaeto-Romance:

8277

Romanian:

Russian:

Samoan:

8279

8285

8377

Sanskrit: 8365

Scots Gaelic: 7168

Serbian: 8382

Serbo-Croatian: 8372

Shona: 8378

Sindhi: 8368

Singhalese:

Slovak:

Slovenian:

Somali:

Spanish:

Sundanese:

Swahili:

Swedish:

Tagalog:

Tajik:

Tamil:

Tatar:

8373

8375

8376

8379

6983

8385

8387

8386

8476

8471

8465

8484

8469

8472

6679

8473

8479

8482

8475

8487

8575

8582

8590

8673

8679

6789

8779

8872

7473

8979

9085

40

VQT2H83

DMP-BD85GN&GA&GC-VQT2H83_eng.book 41 ページ 2010年2月8日 月曜日 午後1時22分

Glossary

AVCHD

AVCHD is a new format (standard) for high definition video cameras that can be used to record and play high-resolution

HD images.

BD-J

Some BD-Video discs contain Java applications, and these applications are called BD-J. You can enjoy various interactive features in addition to playing normal video.

Deep Colour

This unit incorporates HDMI (Deep Colour) technology that can reproduce greater colour gradation (4096 steps) when connected to a compatible TV.

You can enjoy exceptionally rich, natural-looking colours, with smooth, detailed gradation and minimal colour banding.

[A lower colour gradation (256 steps), without Deep Colour, will be reproduced if connected to a TV which does not support Deep Colour.

The unit will automatically set appropriate output to suit the connected TV.]

DLNA (Digital Living Network Alliance)

DLNA is a standard that makes DLNA Certified digital electronics easier and more convenient to use on a home network.

Dolby Digital

This is a method of coding digital signals developed by Dolby

Laboratories. Apart from stereo (2-channel) audio, these signals can also be multi-channel audio.

Dolby Digital Plus

Multi-channel audio and higher audio quality is made possible using Dolby Digital Plus. BD-Video supports up to 7.1 channel output.

Dolby TrueHD

Dolby TrueHD is a very high quality audio format that reproduces the studio master audio. BD-Video supports up to

7.1 channel output.

DTS (Digital Theater Systems)

This surround system is used in many movie theatres. There is good separation between the channels, so realistic sound effects are possible.

DTS-HD

DTS-HD is a high-quality, sophisticated audio format used in movie theatres. Previous DTS Digital Surround-compatible equipment can play DTS-HD as DTS Digital Surround audio.

BD-Video supports up to 7.1 channel output.

DTS-HD High Resolution Audio

This is a signal format achieved by improving the previous

DTS, DTS-ES and DTS 96/24 formats. It is compatible with sampling frequency 96 kHz/48 kHz. BD-Video supports up to

7.1 channel output.

DTS-HD Master Audio

This is a lossless audio format and compatible with 96 kHz/

7.1ch or less. In addition, faithful reproduction of the master audio is enabled using lossless audio encoding technology.

BD-Video supports up to 7.1 channel output.

HDMI (High-Definition Multimedia Interface)

HDMI is a digital interface for consumer electronic products.

Unlike conventional connections, it transmits uncompressed digital video and audio signals on a single cable.

Local storage

This storage area is used as a destination for sub contents for playing BD-Live on BD-Video.

LPCM (Linear PCM)

These are a kind of PCM format.

These are uncompressed digital signals, similar to those found on CDs.

P4HD (Pixel Precision Progressive Processing for HD)

This is a processor which makes use of an exclusive

Panasonic algorithm. Various processing is supported, including a high-level conversion of the TV scanning format from interlace to progressive and a high-level conversion of standard resolution (480i or 576i) video signal to a 1080 High

Definition video signal.

Consequently, this unit is able to provide video of optimal resolution to the connected TV.

PCM (Pulse Code Modulation)

This is one format for converting analogue audio into digital audio, enabling you to enjoy digital audio with no hassle.

x.v.Colour

™ x.v.Colour

™ is a name for devices that are compatible with the xvYCC format, an international standard for expanded colour in motion pictures, and that follow the rules for signal transmission.

You can enjoy vivid colours of wider colour ranges for a more realistic picture when connected to a TV that supports the x.v.Colour

™ with HDMI cable.

24p

This is a progressive image recorded at a rate of 24 frames per second (motion-picture film). Many BD-Video movie contents are recorded in 24 frames/second in accordance with the film materials .

41

VQT2H83

DMP-BD85GN&GA&GC-VQT2H83_eng.book 42 ページ 2010年2月5日 金曜日 午後12時39分

Java and all Java-based trademarks and logos are trademarks or registered trademarks of Sun Microsystems,

Inc. in the United States and other countries.

Manufactured under license from Dolby Laboratories. Dolby and the double-D symbol are trademarks of Dolby

Laboratories.

Manufactured under license under U.S. Patent #’s:

5,451,942; 5,956,674; 5,974,380; 5,978,762; 6,226,616;

6,487,535; 7,392,195; 7,272,567; 7,333,929; 7,212,872 & other U.S. and worldwide patents issued & pending.

DTS and the Symbol are registered trademarks, & DTS-HD,

DTS-HD Master Audio | Essential and the DTS logos are trademarks of DTS, Inc.

Product includes software. © DTS, Inc. All Rights Reserved.

This product incorporates copyright protection technology that is protected by U.S. patents and other intellectual property rights. Use of this copyright protection technology must be authorized by Macrovision, and is intended for home and other limited viewing uses only unless otherwise authorized by Macrovision. Reverse engineering or disassembly is prohibited.

HDMI, the HDMI Logo, and High-Definition Multimedia

Interface are trademarks or registered trademarks of HDMI

Licensing LLC in the United States and other countries.

This product is licensed under the AVC patent portfolio license and VC-1 patent portfolio license for the personal and non-commercial use of a consumer to (i) encode video in compliance with the AVC Standard and VC-1 Standard

(“AVC/VC-1 Video”) and/or (ii) decode AVC/VC-1 Video that was encoded by a consumer engaged in a personal and non-commercial activity and/or was obtained from a video provider licensed to provide AVC/VC-1 Video. No license is granted or shall be implied for any other use. Additional information may be obtained from MPEG LA, LLC. See http://www.mpegla.com.

HDAVI Control ™ is a trademark of Panasonic Corporation.

x.v.Colour

™ is a trademark.

VIERA CAST ™ is a trademark of Panasonic Corporation.

“AVCHD” and the “AVCHD” logo are trademarks of

Panasonic Corporation and Sony Corporation.

SDXC Logo is a trademark of SD-3C, LLC.

DivX ® is a registered trademark of DivX, Inc., and is used under license.

“Blu-ray Disc” is a trademark.

“BD-LIVE” logo is a trademark of Blu-ray Disc Association.

“BONUSVIEW” is a trademark of Blu-ray Disc Association.

YouTube and Picasa are trademarks of Google, Inc.

The Wi-Fi CERTIFIED Logo is a certification mark of the

Wi-Fi Alliance.

DLNA ® , the DLNA Logo and DLNA CERTIFIED TM are trademarks, service marks, or certification marks of the

Digital Living Network Alliance.

Windows is a registered trademark of Microsoft Corporation in the United States and other countries.

This product incorporates the following software:

(1) the software developed independently by or for

Panasonic Corporation,

(2) the software owned by third party and licensed to

Panasonic Corporation,

(3) the software licensed under the GNU General Public

License, Version 2 (GPL v2),

(4) the software licensed under the GNU LESSER General

Public License, Version 2.1 (LGPL v2.1) and/or,

(5) open sourced software other than the software licensed under the GPL v2 and/or LGPL v2.1

For the software categorized as (3) and (4), please refer to the terms and conditions of GPL v2 and LGPL v2.1, as the case may be at http://www.gnu.org/licenses/old-licenses/gpl-2.0.html and http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.

In addition, the software categorized as (3) and (4) are copyrighted by several individuals. Please refer to the copyright notice of those individuals at http://www.am-linux.jp/dl/JPRCBW98

The GPL/LGPL software is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY, without even the implied warranty of MERCHANTABILITY or FITNESS

FOR A PARTICULAR PURPOSE.

At least three (3) years from delivery of products, Panasonic will give to any third party who contacts us at the contact information provided below, for a charge no more than our cost of physically performing source code distribution, a complete machine-readable copy of the corresponding source code covered under GPL v2/LGPL v2.1.

Contact Information [email protected]

Source code is also freely available to you and any other member of the public via our website below.

http://www.am-linux.jp/dl/JPRCBW98

42

VQT2H83

DMP-BD85GN&GA&GC-VQT2H83_eng.book 43 ページ 2010年2月5日 金曜日 午後12時39分

Safety precautions

Placement

Set the unit up on an even surface away from direct sunlight, high temperatures, high humidity, and excessive vibration.

These conditions can damage the cabinet and other components, thereby shortening the unit’s service life. Do not place heavy items on the unit.

Voltage

Do not use high voltage power sources. This can overload the unit and cause a fire. Do not use a DC power source. Check the source carefully when setting the unit up on a ship or other place where DC is used.

AC mains lead protection

Ensure the AC mains lead is connected correctly and not damaged. Poor connection and lead damage can cause fire or electric shock. Do not pull, bend, or place heavy items on the lead.

Grasp the plug firmly when unplugging the lead. Pulling the

AC mains lead can cause electric shock. Do not handle the plug with wet hands. This can cause electric shock.

Foreign matter

Do not let metal objects fall inside the unit. This can cause electric shock or malfunction.

Do not let liquids get into the unit. This can cause electric shock or malfunction. If this occurs, immediately disconnect the unit from the power supply and contact your dealer.

Do not spray insecticides onto or into the unit. They contain flammable gases which can ignite if sprayed into the unit.

Service

Do not attempt to repair this unit by yourself. If sound is interrupted, indicators fail to light, smoke appears, or any other problem that is not covered in these instructions occurs, disconnect the AC mains lead and contact your dealer or an authorized service centre. Electric shock or damage to the unit can occur if the unit is repaired, disassembled or reconstructed by unqualified persons.

Extend operating life by disconnecting the unit from the power source if it is not to be used for a long time.

-If you see this symbol-

Information on Disposal in other Countries outside the European Union

This symbol is only valid in the European

Union.

If you wish to discard this product, please contact your local authorities or dealer and ask for the correct method of disposal.

43

VQT2H83

DMP-BD85GN&GA&GC-VQT2H83_eng.book 44 ページ 2010年2月8日 月曜日 午後1時22分

Index

A AC mains lead. . . . . . . . . . . . . . . 11

Angle . . . . . . . . . . . . . . . . . . . . . . 26

Audio

Changing audio . . . . . . . . . . . . 16

Channel . . . . . . . . . . . . . . . . . . 26

Language . . . . . . . . . . . . . . 26, 28

AVCHD. . . . . . . . . . . . . . . . . . . . . 37

B BD-Live . . . . . . . . . . . . . . . . . . . . 18

BD-Video Ratings . . . . . . . . . . . . 28

BONUSVIEW . . . . . . . . . . . . . . . . 18

C Chapter . . . . . . . . . . . . . . . . . . . . 17

Cleaning . . . . . . . . . . . . . . . . . . . . 4

Connection . . . . . . . . . . 8, 9, 10, 11

D Deep Colour . . . . . . . . . . . . . . . . 41

Default Settings . . . . . . . . . . . . . 31

DIRECT NAVIGATOR . . . . . . . . . 16

DivX . . . . . . . . . . . . . . . . . . . . 19, 37

DLNA . . . . . . . . . . . . . . . . . . . . . . 24

DNS Server . . . . . . . . . . . . . . . . . 31

Dolby Digital . . . . . . . . . . . . . 29, 35

Dolby Digital Plus. . . . . . . . . 29, 35

Dolby TrueHD . . . . . . . . . . . . 29, 35

DTS . . . . . . . . . . . . . . . . . . . . 29, 35

DTS-HD . . . . . . . . . . . . . . . . . 29, 35

DVD-Video Ratings. . . . . . . . . . . 28

F Finalize . . . . . . . . . . . . . . . . . . . . . 7

Firmware update. . . . . . . . . . . . . 14

Frame-by-frame . . . . . . . . . . . . . 16

H HDMI . . . . . . . . . . . . . . . . . . . . . 8, 9

I IP address. . . . . . . . . . . . . . . . . . 31

J JPEG . . . . . . . . . . . . . . . . . . . 20, 37

L LAN . . . . . . . . . . . . . . . . . . . . . . . 10

Language

Audio . . . . . . . . . . . . . . . . . 26, 28

Menu . . . . . . . . . . . . . . . . . . . . 28

On-Screen . . . . . . . . . . . . . . . . 29

Soundtrack. . . . . . . . . . . . . . . . 26

Subtitle . . . . . . . . . . . . . . . . 26, 28

Local storage . . . . . . . . . . . . . . . 41

M MPEG2 . . . . . . . . . . . . . . . . . . . . 37

MP3 . . . . . . . . . . . . . . . . . . . . 21, 37

N Network

Connection. . . . . . . . . . . . . . . . 10

Setting . . . . . . . . . . . . . . . . 12, 31

O On-Screen Language. . . . . . . . . 29

P Picture-in-picture . . . . . . . . . . . . 18

Playback

AVCHD . . . . . . . . . . . . . . . . . . 16

DivX . . . . . . . . . . . . . . . . . . . . . 16

JPEG . . . . . . . . . . . . . . . . . . . . 20

MPEG2 . . . . . . . . . . . . . . . . . . 16

MP3 . . . . . . . . . . . . . . . . . . . . . 21

Playlists . . . . . . . . . . . . . . . . . . . 15

Pop-up menu . . . . . . . . . . . . . . . 16

Proxy Server. . . . . . . . . . . . . . . . 31

P4HD . . . . . . . . . . . . . . . . . . . . . . 41

Q Quick Start . . . . . . . . . . . . . . . . . 31

R Random play . . . . . . . . . . . . . . . 26

Re-master. . . . . . . . . . . . . . . 17, 27

Remote control . . . . . . . . . 4, 5, 14

Repeat play . . . . . . . . . . . . . . . . 26

Resume play function . . . . . . . . 16

S SD card . . . . . . . . . . . . . . . . . . 7, 18

Setup menu . . . . . . . . . . . . . . . . 28

Slideshow. . . . . . . . . . . . . . . . . . 20

Slow-motion . . . . . . . . . . . . . . . . 16

Soundtrack. . . . . . . . . . . . . . . . . 26

Status Message . . . . . . . . . . . . . 16

Still picture . . . . . . . . . . . . . . . . . 20

Subtitle . . . . . . . . . . . . . . . . . . . . 26

U USB device. . . . . . . . . . . . . . . . . . 7

V VIERA CAST TM . . . . . . . . . . . . . . 23

VIERA Link

“HDAVI Control TM ” . . . . . . . . . . 22

W Wireless LAN . . . . . . . . . . . . . . . 10

X x.v.Colour

TM . . . . . . . . . . . . . . . . 41

24p . . . . . . . . . . . . . . . . . . . . 27, 30

(Inside of product)

Panasonic Corporation

Web Site: http://panasonic.net

C Panasonic Corporation 2010 p

VQT2H83

F0210SS0

advertisement

Was this manual useful for you? Yes No
Thank you for your participation!

* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project

Related manuals