Hisense PDH4217, PDH4217EU User Manual

Add to My manuals
25 Pages

advertisement

Hisense PDH4217, PDH4217EU User Manual | Manualzz

R

PDP COLOUR TV

USER'S MANUAL

PDH4217EU

Part No: IES051024

OSD language Settings

When you start using your set for the first time, the Plug & play menu will be displayed on the screen as shown on the right.

1.Press the [CH+ or CH-] button to

select the OSD language.

2.Press the [VOL+ or VOL-] button to

select the language that you want

to use.

Plug & Play

OSD language

Teletext Language

Colour system

Sound system

English

West Europe

SECAM

AUTO

Auto search

Notes: The Plug & Play menu is only displayed once when you

turn on the TV. If you want to select this menu, please follow the

instructions below:

1).Press the [Menu] button to enter

the main menu.

2).Press the [VOL+ or VOL-] button

to slect the item General

settings as shown on the right.

3).Press the [CH+ or CH-] button to

select the Plug & play and press

the [VOL+ ] button to select this

function.

4).Turn on your TV again, the Plug &

Play menu will be displayed on the

Screen.

General settings

Colour system

Noise reduce

Deinterlace

Factory reset

Sleep timer

Plug & Play

Language english

SAFETY CLASS

This is an IEC safety class I product and must be grounded for safety.

Important safeguard

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

1

Stand installation

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

2

Preparation for your new TV

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

3

Selecting a location for the TV

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

3

Learning about your TV

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

3

Connecting your TV

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

5

Connecting to A / V equipments

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

5

Connecting to a computer

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

5

Connecting to an antenna

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

6

Using the remote control

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

7

Preparing the remote control for use

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

7

Learning about the remote control

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

8

Using the TV features

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

9

Understanding the TV features

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

9

Basic operations

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

9

Using the TV settings menu

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

11

Using the Picture menu

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

12

Using the Audio settings menu

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

12

Using the PIP menu

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

12

Using the OSD setting menu

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

13

Using the General settings menu

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

14

Teletext operations

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

15

Appendix

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

17

The Scart Interface

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

17

Cleaning and Care

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

18

Troubleshooting

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

19

Specifications

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

20

PDP wall-mounting bracket installation gudie

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

21

Design and specifications are subject to change without notice.

The symbol of the dustbin barred means that this apparatus cannot be put at the rebus with not sorted waste domestic running.

It is interdict to throw with not sorted waste domestic running, of deposited on the public thoroughfare or at any other place not envisaged to this end. This apparatus contains substances being able to be harmful for the environment.

CAUTION

The lightning flash with arrowhead symbol, within an equilateral triangle is intended to alert the user to the presence of uninsulated dangerous voltage within the to constitute a risk of electric shock.

CAUTION: TO REDUCE THE RISK OF ELEC-

TRIC SHOCK, DO NOT REMOVE

COVER(OR BACK).NO USER-

SERVICEABLE PARTS INSIDE.

REFER SERVICING TO QUALIFIED

SERVICE PERSONNEL.

The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance( servicing ) instructions in the literature accompanying the set.

FIRE AND SHOCK PRECAUTIONS

Adequate ventilation must be provided to prevent heat build up inside unit. Keep the inside of unit free from foreign objects, such as hairpins, nails, paper, etc. Do not build the set into a bookcase or other enclosures in which it would be poorly ventilated. Do not place it on carpet or a bed as low ventilation boles could become obstructed.

Do not set liquids, including flower vases and vessels filled with chemicals or water etc., On top of the unit as liquid could get inside the unit. If a hazardous object falls inside the TV set, unplug it immediately and call a qualified technician for removal.

When placing or moving the TV set, take care to insure that the power cord is fitted into the allocated slot.

To avoid damage to the power cord, never allow heavy objects such as the TV set itself to be placed on

the power cord. Keep cord away from radiating appliances. Do not allow cord to become knotted or

tangled. Do not lengthen the cord. When removing the power plug from the socket, always hold onto the

plug, never pull by the cord.

This TV set shall be connected to a main socket outlet with a protective earthing contaction

The main plug and main switch should be remain readily operable after installation

No nacked flame sources, such as lighted candles, should be placed on the apparatus

Minimum distances around the apparatus for sufficient ventilation

The use of apparatus in moderate climates

WARNING

Do not remove the back cover of the TV set. Accidental contact with high voltage components could result in electric shock. When internal adjustment is necessary, please contact your distributor.

If your set produces sound but no picture, or it emits smoke or produces a strange sound or smell, continue operation is dangerous. Immediately turn off power and remove the power plug from the socket and contact your distributor.

During vacation or other occasions when you will not be using the set for an extended period, remove the power plug from the socket.

This appliance should not be operated by children or infirm persons without adequate supervision.

-1-

Stand installation

Fig.1

Fig.2

Fig.3

- 2 -

Preparation for Using your new TV

Selecting a location for the TV

1)Place the TV on the floor or on a sturdy platform in a location where light does not directly hit the screen.

2)Place the TV far enough from the walls to allow proper ventilation. Inadequate ventilation may cause

overheating, which may damage the TV.

NOTE: Please contact local dealer for wall mounting.

Learning about your TV

You can operate your TV by using the buttons on the front panel or the remote control. The terminals on the back panel provide all the connections you will need to connect other equipment to your TV.

Front Controls

- 3 -

Preparation for Using your new TV

1

13 26

14

15

11

12

24

23

20

25

19

SCART1

CVBS/RGB

SCART2

CVBS/YC

10 9

Remote Sensing Window

Power indicator

Menu button

INPUT Selcection

Volume down / cursor left

Volume up / cursor right

Channel down / cursor down

Channel up / cursor up

Power Switch (ON/OFF)

AC Power Socket

16 17 18

DVI input

VGA input

RS232C DEBUG input

PIP headphone output

PC audio input

Audio 3 Input(For S-Video)

YP

B

P

R

/YC

B

C

R

input

Audio 1 Input(For Video)

audio output

VIDEO OUTPUT

Scart1 connector

Scart2 connector

CATV antenna input

S-video input

Video input

Audio 2 Input(For YPbPr)

Speaker Connector

Note: The above figures are for reference only, please refer to the actual units to determine their appearance.

- 4 -

1

Preparation for Using your new TV

1

Connecting your TV

Caution: Do not plug the TV in until you have finished connecting all of your equipment.

Connecting to A/V equipments

To enjoy its multimedia features, you can connect your TV to A/V equipments such as VCR, DVD, STB, Satellite receiver, Camcorder, Audio amplifier etc., and select signal sources using your remote control. Connect the devices as shown below.

SCART1

CVBS/RGB

SCART2

CVBS/YC

SCART1 SCART2

LANGUAGE ENGLISH

1

STB

ANT

S/PDIF

LEFT

CENTER

S.L

VGA

Y

P

P R C V

B

S-VIDEO

B R

VCD, DVD

Notes: Modes that YP

B

P

R

/YC

B

C

R

can display include:480P/60Hz,480I/60Hz,576P/50Hz,576I/50Hz

720P/50Hz,720P/60Hz,1080I/50Hz,1080I/60Hz

Connecting to a Computer

You can use your TV as a monitor/speakers for your computer by connecting through its 15pin standard RGB

interface and PC audio interface. Connect the devices as shown below.

- 5-

Preparation for Using your new TV

PC/NB

To speaker

To VGA

Audio line

RGB line

PC AUDIO IN

VGA

Connecting to an antenna

To enjoy the terrestrial signal transmitted by your local TV station, you need an indoor or outdoor antenna

(not supplied). Perfect picture quality requires a good signal and generally means that an outdoor antenna must be used. The exact type and location of the antenna will depend on your particular area. Consult your

local dealer or service personnel for best advice. If you are a subscriber of your local CATV net, the outdoor or indoor antenna is not needed. Connect the equipments as the following figure.

Plug(not supplied)

COAXIAL CABLE (75

W

)

TWIN-LEAD FEEDER(300

W

)

The signal comes from:

An outdoor antenna

An indoor antenna

CATV net

Adaptor (not supplied)

Loosen the screw Insert the feeder in Tighten the screw

ANTENNA SOCKET

ANT 75 ¦¸

- 6-

Using the remote control

Preparing the remote control for use

Installing the remote control batteries

1. Open the battery cover on the back of the remote control.

2. Install two AAA size(1.5V) batteries. Match the + and - signs on the batteries to the signs on the battery compartment.

3. Close the battery cover.

Note:

1.Dispose of your batteries in a designated disposal area. Do not throw batteries into fire.

2.Do not mix battery types or combine used batteries with new ones.

3.Remove dead batteries immediately to prevent battery acid from leaking into the battery compartment.

4.If you do not intend to use the remote control for a long time, remove the batteries.

5.The effective range of remote control is suggested in the figure.

6m

15

8m

15

6m

30

6m 8m

30

6m

- 7-

Using the remote control

Learning about the remote control

Power

:Power on/off

Channel number:

Direct channel selection

Recall : Return to previous channel

P.Mode

:Select picture mode

CH+:

Channel up

VOL -:Volume down

CH

-:Channel down

S.Mode

:Select sound mode

Still

:Snapshooting

Zoom :Ajust zoom ration

Video

:Switch to Video source

Source

:Switch input source

YP

B

P

R :Switch to YP

B

P

R

source

PIP Source

:Switch input PIP source

Sub.Code

Index

Video

Reveal

Source

Source

Still

Hold

S-Video

Cancel

YP

B

P

R

PIP

CH-

Size

PC

Mix

Swap

CH+

Text

Teletext select

Display

:Display current input

Teletext

VOL+

:Volume up

Menu

:Call up the main menu

Mute

:Mute the sound

S-VIDEO

:Switch to S-VIDEO source

: Mono/Stereo operation

PC

:Switch to VGA/DVI source

SWAP

:Exchange main source and PIP source

PIP CH+

: PIP Channel up

PIP CH: PIP Channel down

- 8-

Using the TV features

Understanding the TV features

Multimedia - TV receiver, Video monitor and PC display, all in one.

Wider viewing angle, 16:9 display - 160 ¡ã

Digital display device - truthfully reproducing the images, without distortion or blurring, irrespective

of magnetic or geomagnetic effect.

200 channels storage

Sleep timer

Teletext with 252 pages memory

NICAM

Two SCART interface

Multi-language OSD

Basic Operations

Power ON/OFF

1) Connect the TV to power outlet and turn on the power switch, the power

indicator will be red and then turn blue.Several seconds later, TV picture

will display on the screen.

2) Press the Power button on the front control or on the remote control to make

the TV on standby.Press the power switch to turn off power.

3) If you decide to shut off the TV for a long time, it is recommended that you unplug the power from the outlet.

Signal source selection

Press [CH+/CH- ] button to select TV main source input; press the [SOURCE] button to select TV ,YP

B

P

R

,Video,

S-video,VGA,DVI, scart1,scart2 input; press the [VIDEO] button to select VIDEO input; press the

[S-VIDEO] button to select S-VIDEO input; press the [ YP

B

P

R

button to select YP

B

P

R

input; press the [PC] button to select VGA or DVI input; press the [PIP SOURCE] button to select TV ,YP

B

P

R

,video,vga,dvi,scart1,scart2 input of pip source input;press [PIP CH+/CH- ] button to select TV input; press the [SWAP] button to swap main source input and pip source input.

Select channels by [ CH+/CH]

- 9-

Using the TV features

Select channels by [ CH+/CH]

You can also use[CH+ / CH-] to select channels. [CH+] i ndicates channel number increase; [CH-] indicates channel number decrease.

Select channels by numbers

To select a channel : Press the channel numbers in series to select channel directly.

For example, to seclect channel 120, Press the button 1, and 1 will display on the top right corner of the screen,

then press the button 2, 12 will display, press the button zero, you can enjoy the program of channel 120.

NOTE:

1) When you changing the channel, the sound state graphics can be displayed below the channel number. There

are 3 sound states in this TV. If the sound is mono, the graphics is , If the sound is stereo, the graphics is

If the sound is NICAM dual I/II, the graphics is .

There are two symbol at right of the sound state graphics,

Which indicate preset of picture system and sound system.

2) When you changing the channel, the sound of current channel will be firstly changed to stereo or NICAM dual I

according to the sound state of current channel. You can press the

I/II

button on the remote control to change

current sound type.

Adjust Volume

When menu is not displayed on the screen, press [VOL+ or VOL-] to adjust the volume.

Use [Recall] button

Power ON/OFF

Press the [ Recall ] button repeatedly to alternate between the present channel and the previous channel.

Display channel number

Press [Display] button to display the present channel number, but it will also disappear 3 seconds after your pressing.

Select picture modes

You can select the picture mode from among three preset modes and one user-set mode. Press the [ P.mode ] button repeatedly to select the desired picture mode.

Normal

User

Soft

Bright

Select sound modes

You can select the sound mode from among three preset modes and one user-set mode. Press the [ S.mode ] button repeatedly to select the desired sound mode.

Use [Still] button

Press the [ Still ] button to snapshot the present picture, and press again to return to normal watching.

Speech

Nomal

User

Music

Use [ Zoom ] button

Press the [ Zoom ] button to adjust the screen aspect ratio and zoom ratio

Mute function

Press [ Mute ] button repeatedly to switch between mute and unmute mode.

- 10-

Using the TV features

Using the TV settings menu

Program

Tv settings

1) Press the [MENU] button to enter the main menu.

2) Press the [VOL+ or VOL-] button to select the item TV settings .

3) Press the [CH+ or CH-] button to select Program.

4) Press the [VOL+ or VOL-]

Sound system

You can set sound syetem.

button to select the present channel.

1) Press the [MENU] button to enter the main menu.

2) Press the [VOL+ or VOL-] button to select the item TV settings

3) Press the [CH+ or CH-] button to select sound system.and press

the [VOL+] button to enter sound system

4) Press the [VOL+ ] button to switch among AUTO I D/K B/G L/L`

Program

Sound system

Auto search

Manual search

Fine tune

Skip

Program edit

AUTO-Search

1) Press the MENU button to enter the main menu.

2) Press the [VOL+ or VOL-] button to select the item TV settings.

3) Press the [CH+ or CH-] button to select Auto search and press

the [ VOL+ ] button to enter Auto search .

4) Press the [ VOL+ ] button to switch among Normal and Auto +L/L`.

Notes:If you want to select L/L` and else sound system,

please select [auto search +L/L`] as right shown.

Manual search

1) Press the MENU button to enter the main menu.

2) Press the [VOL+ or VOL-] button to select the item TV settings.

3) Press the [CH+ or CH-] button to select Manual search.

4) Press the [ VOL+ or VOL-] button to start Manual searching.

Tv settings

Program

Sound system

Auto search

Manual search

Fine tune

Skip

Program edit

Normal

Auto + L/L`

Fine tune

1) Press the MENU button to enter the main menu.

2) Press the [VOL+ or VOL-] button to select the item TV settings.

3) Press the [CH+ or CH-] button to select Fine tune.

4) Press the [ VOL+ or VOL-] button to start Fine searching.

Skip

1) Press the [MENU] button to enter the main menu.

2) Press the [VOL+ or VOL-] button to select the item TV settings

3) Press the [CH+ or CH-] button to select Skip.

4) Press the [VOL+] button to skip or unskip the present channel.

NOTE: The 'skipped' channels cannot be accessed by [CH+ or CH-] , but you can access them by digit (direct select)

button.

11-

Using the TV features

Program edit

1) Press the MENU button to enter the main menu.

2) Press the [VOL+ or VOL-] button to select the item TV settings.

3) Press the [CH+ or CH-] button to select Channel edit.

4) Press the [ VOL+] button to start Channel edit.

5)Channel edit can carry out program1 and program2 to be interchanged by the button [SWAP],or copy program1 to

program2 by the button [COPY].

Using the Picture menu

Picture parameters

1) Press the [MENU] button to enter the main menu.

2) Press the [VOL+ or VOL-] button to select the item Picture

Parameters.

3) Press the [CH+ or CH-] button to select the item you want to adjust.

4) Press the [VOL+ or VOL-] button to adjust the level.

.

5) The adjusted data is stored automatically in the user mode.

NOTE : The Colour temp is only to adjust in the PC mode.

Using the Audio setting menu

Brightness

Contrast

Saturation

Hue

Colour temp

Sharpness

Adjust audio settings

Audio settings

1) Press the [MENU] button to enter the main menu.

2) Press the [VOL+ or VOL-] button to select the item Audio settings.

3) Press the [CH+ or CH-] button to select the item you want to adjust.

4) Press the [VOL+ or VOL-] button to adjust the level.

5) The adjusted data is stored automatically in the user mode.

Bass

Treble

Balance

Sorround

Using the PIP menu

1) Press the MENU button to enter the main menu ,press the

[VOL+ or VOL-] to select the Picture in picture.

2) Press the [CH+ or CH-] button to select the PIP size, and

press the [ VOL+] button to enter the PIP size, Press the

Picture in picture

PIP position

[CH+ or CH-] button to select the Off/Small/Medium/Large/PBP .

3) Press the [CH+ or CH-] button to select the PIP saturation, and

press the [ VOL+] button to enter the PIP saturation, Press the

PIP size

PIP brightness

PIP contrast

[CH+ or CH-] button to select the PIP saturation.

4) Press the [CH+ or CH-] button to select the PIP position or PIP

PIP saturation

Volume

brightness or PIP contrast, press the [VOL+ or VOL-] button to adjust the value.

Note: 1) When main picture is TV/ VIDEO/SCART/S-VIDEO. pip picture is HDTV/VGA.

2) When main picture is HDTV/VGA. pip picture is TV/ VIDEO /SCART .

-12 -

Using the TV features

Using the OSD settings menu

OSD position

1) Press the [MENU] button to enter the main menu.

2) Press the [VOL+ or VOL-] button to select the item OSD

settings.

3) Press the [CH+ or CH-] button to select OSD position

4) Press the [VOL+ or VOL- or CH+ or CH-] button to

adjust the OSD POSITION

OSD timeout

1) Press the [MENU] button to enter the main menu.

2) Press the [VOL+ or VOL-] button to select the item OSD settings.

3) Press the [CH+ or CH-] button to select OSD timeout

4) Press the [VOL+ or VOL- or CH+ or CH-] button to

adjust the OSD TIMEOUT

OSD settings

OSD position

OSD timeout

OSD language

OSD lock

Transparency

OSD language

1) Press the MENU button to enter the main menu.

2) Press the [VOL+ or VOL-] button to select the item OSD settings.

CHANGE PASSWORD

to enter the OSD language

4) Press the [ VOL+] button to select the language what you want use.

OSD lock

1) Press the MENU button to enter the main menu.

2) Press the [VOL+ or VOL-] button to select the item OSD settings.

CHANGE PASSWORD

to enter the OSD lock

4) Press the [ VOL+] button to select Yes, then OSD locked.

At that time you press MENU again,the screen will display as right shown.

Notes: If you want to unlock the OSD, please press [9] when the screen

display as right shown.

OSD locked!

Transparency

1) Press the MENU button to enter the main menu.

2) Press the [VOL+ or VOL-] button to select the item OSD settings

3) Press the [CH+ or CH-] button to select Transparency

4) Press the [ VOL+ or VOL-] button to adjust the ITEM

-13 -

Using the TV features

Using the General settings menu

Colour system

You can set colour syetem.

1) Press the [MENU] button to enter the main menu.

2) Press the [VOL+ or VOL-] button to select the item

General settings

3) Press the [CH+ or CH-] button to select colour system and press

the [VOL+] button to enter colour system

4) Press the [VOL+ ] button to switch among Auto, Pal ,Secam.

General settings

Language english

Colour system

Noise reduce

Deinterlace

Factory reset

Sleep timer

Plug & Play

Noise reduce

1) Press the MENU button to enter the main menu.

2) Press the [VOL+ or VOL-] button to select the item General settings

3) Press the [CH+ or CH-] button to select Noise reduce.

4) Press the [ VOL+ ] button to enter the Noise reduce.

5) Press the [ CH+ or CH-] button to select Low / Middle / High .

Deinterlace

1) Press the MENU button to enter the main menu.

2) Press the [VOL+ or VOL-] button to select the item General settings

3) Press the [CH+ or CH-] button to select Deinterlacer

4) Press the [ VOL+ ] button to enter the Deinterlacer

5) Press the [ CH+ or CH-] button to select the feature

Factory reset

1) Press the MENU button to enter the main menu.

2) Press the [VOL+ or VOL-] button to select the item General settings

3) Press the [CH+ or CH-] button to select Factory reset.

4) Press the [ VOL+-] button to select Yes or No .

Sleep timer

1) Press the MENU button to enter the main menu.

2) Press the [VOL+ or VOL-] button to select the item General settings

3) Press the [CH+ or CH-] button to select Sleep timer

4) Press the [ VOL+-] button to adjust the Sleep timer

-14-

Using the TV features

Using the PC menu

1) Press the MENU button to enter the main menu.

2) Press the [VOL+ or VOL-] button to select the item

PC Parameters.

3) Press the [CH+ or CH-] button to select the item you

PC Parameters

want to adjust.

NOTE: 1)The menu is useful only on VGA/DVI and HDTV mode.

It is useless in others mode.

2) The button [AUTO] is used to adjust position of picture automatic and it is effective only on VGA/DVI mode.

The button [ AUTO COLOUR] is used to adjust quality of picture manually when signal is not good sometimes.

The button [POSITION] is used to adjust the position of

Clock

Phase

Position

I/p info picture.

The button [CLOCK] and [PHASE] can adjust quality of picture minutely, and they are used less.

3) In HDTV mode ,Clock can not be selected.

4) In DVI mode,I/P info can be selected only.

Teletext Operations

Selecting teletext mode

Select the channel that is broadcasting the desired Teletext program.

Press [ TEXT ] button and alternate between Teletext mode and normal mode.

Note: All the operations below should be under the Teletext mode except TIME operation.

Page selection

Hold

Some Teletext information is contained on more than one page, the pages automatically changing after a given reading time.

Press [ S-Video ] button to stop the page changing.

Press [ S-Video ] button again to allow the page to change.

Reveal

Some Teletext pages contain quiz or questions with hidden answers.

Press the [ Source ] button to see the answers.

Press the [ Source ] button again to hide the answers.

Cancel

When a page is selected in Teletext mode it may take some time before it becomes available.

Press the [ YPbPr ] button to switch to the TV mode.

When the required page is found, the page number will appear at the top of the TV picture, press the [ YPbPr ] button to return to the selected Teletext page.

Note: You can not change TV program while in this mode.

-15-

Using the TV features

Teletext Operations

Sub code

Some Teletext pages contain sub page that require you to input the sub code.

Press [ Zoom ] button until ***|**** is displayed, and enter last four-digit sub code for the sub page you need.

Mix

You can mix Teletext with TV pictures, which means transparent teletext.

Press [ Swap ] to mix, and press [ Swap ] again to cancel the mixed effect.

Size (top/bottom/full)

Press the [ PC ] button to display the TOP HALF of the page.

Press again to display the BOTTOM HALF of the page.

Press again to return to a FULL PAGE display.

Note: Changing pages reverts to a FULL PAGE display.

Index

Teletext index page guides you quickly to your desired page.

Press [ Vedio ] button to enter index page.

Fast text

The RED, GREEN, YELLOW & CYAN buttons are used for quick access to colour coded pages

transmitted by FAST TEXT broadcast.

-16-

Appendix

The SCART interface

Also known as Peritel, this standard provides a cheap multi-signal connector to domestic TV and other video equipment.

Arrangement 1 is the original and allows for composite video input/output,

RGB inputs and stereo audio input/output.

Arrangement 2 allows for composite video input/output, and stereo audio

input/output.

Cation:The output of video and audio are always from turner of R F.

TV can auto check aspect ratio in scart.

Scart Connector Pinout Details

Pin Signal

1 Audio output B (right)

2 Audio input B (right)

3 Audio output A (left)

4 Ground (audio)

5 Ground (blue)

SCART arrangement 1

Signal level

0.5V rms

0.5V rms

0.5V rms

-

-

0.5V rms

Impedance

<1kohm

>10kohm

<1kohm

-

-

>10kohm 6 Audio input A (left)

7 Blue input

8 Function select (AV control)

9 Ground (green)

10 -

0.7V

75ohms

High (5 12V) AV mode

Mid(5-8V)-Wide-screen

Low (0 2V) TV mode

>10kohm

-

-

11 Green input

12 -

13 Ground (red)

-

0.7V

75ohms

-

14 Ground (blanking)

15 Red input

-

-

0.7V

-

-

75ohms

16 RGB switching control

High (1-3V) - RGB

Low (0 -0.4V) Composite

75ohms

17 Ground (video input & output) -

18 Ground(RGB Switching Control) -

19 Video output (composite) 1V including sync

20 Video input (composite)

21 Common ground (shield)

1V including sync

-

-

75ohms

75ohms

-

-17 -

Appendix

Pin Signal

1 Audio output B (right)

2 Audio input B (right)

3 Audio output A (left)

4 Ground (audio)

5 Ground

6 Audio input A (left)

7 -

8

SCART arrangement 2

Signal level

0.5V rms

0.5V rms

0.5V rms

-

-

0.5V rms

Function select (AV control)

Impedance

<1kohm

>10kohm

<1kohm

-

-

>10kohm

-

-

-

-

High (5

-

12V) AV mode

Mid(5-8V)-Wide-screen

Low (0 2V) TV mode

-

-

-

>10kohm

-

-

-

9 Ground

10 -

11 -

12 -

13 Ground

14 Ground (blanking)

15 -

16 -

17 Ground

18 Ground

19 Video output

20 Video input

21 Common ground (shield)

-

-

-

-

-

0.3V

1V including sync

1V including sync

-

-

-

-

-

-

75ohms

75ohms

75ohms

-

WARNING: Do NOT attempt to work on ANY equipment unless you KNOW what you are doing.

Notes: Y/C can not be displayed in the PIP source.

Cleaning and care

WARNING: Do not try to remove the cabinet back. Refer servicing to qualified service technicians.

To clean the TV screen:

1) Unplug the TV to avoid possible shock hazard.

2) Use a clean cellulose sponge or chamois cloth dampened with a solution of mild detergent and warm

water to clean the TV screen and trim. Do not use too much water as water spilled into the cabinet

can cause damage to the TV.

3) Wipe off any excess moisture with a clean dry cloth.

4) Polish the cabinet with a quality furniture polish to maintain the finish and appearance of the cabinet.

Caution

: Never use strong solvents such as thinner, benzene, or other chemicals on or near the cabinet.

These chemicals can damage the finish of the cabinet.

-18 -

Appendix

Troubleshooting

Before calling a service technician, please check the following table for a possible cause of the problem and some solutions.

Symptoms

TV will not turn on

No picture, no sound

No sound, picture OK

Poor sound, picture OK

Poor picture, sound OK

Unable to select a certain channel

Possible Solutions

Make sure the power cord is plugged in, then press [Power].

The remote control batteries may be dead. Replace the batteries.

Check if you have set the off timer.

Check the antenna/cable connections.

Press [Display] to see if you have select the right signal source.

The sound may be muted. Press [ >] on the remote control or .

The station may have broadcast difficulties. Try another channel.

Check the speakers cable connections.

The station may have broadcast difficulties. Try another channel

Check the speakers cable connections.

Check the antenna connections.

The station may have broadcast difficulties. Try another channel.

Adjust the picture from the menu.

The channel may be skipped. See SKIP on page 11.

Poor colour or no colour

The remote control does not operate

Disorder display at power on

The station may have broadcast difficulties. Try another channel.

Adjust the HUE and COLOUR in the menu.

There may be an obstruction between the remote control and the

remote control sensor.

The batteries may be installed with a wrong polarity.

The remote control batteries may be dead. Replace the batteries.

Check if you have entered Teletext mode. Press [ Text ] to quit.

This may be caused by too short interval between power off and on.

Unplug the power and restart.

Customer important notice : When the TV can not be operationed in some special situation,please unplug the power and restart.

-19 -

Specifications

panel

Television system

Channel coverage

Analog RGB mode

Y P

B

/C

B

P

R

/C

R

mode

Resolution

Contrast

Brightness (Peak)

Viewing angle

Power source

Power consumption

Audio output

42 INCH PDP

Multi- system(PAL,SECAM)

VHF-L: E2-S8

VHF-H: S9-S37

UHF: S38-E69

640X480/60Hz,800X600/60Hz,1024X768/60Hz,1280X1024/60Hz

480I/60Hz,480P/60Hz,576I/50Hz,576P/50Hz,720P/50Hz,720P/60Hz,

1080I/50Hz,1080I/60Hz

1024X768

10000:1

1500cd/m 2 o

AC100V--240V, 50/60Hz

350W

Connection interface

RF input: Cable/ antenna RF 1

VIDEO input: YP

B

P

R

1 1.0/0.286Vp-p

W

,CVBS 1,Y/C 1,

GRAPHIC input: Analog RGB 15pin(VGA) 1(0.7Vp-p 75

W

)

Digital RGB(DVI-D) X1

AUDIO input: SCART 1 audio 1,SCART 2 audio 1 and

Audio in 3 ,Mini-jack for PC (3.5 )X1

AUDIO output: SCART 1 audio 1,SCART 2 audio 1 and

PIP headpohone 1,Rca jack audio 1

SCART INPUT: SCART1 ( forCVBS, RGB andCANAL+ )

SCART2 ( for CVBS and Y/C)

OTHER: RS232C X 1 ( for software updating )

Dimensions

1114mm X 690mm X 89mm ( LXWXH )

Weight

32.5kg

Supplied accessories Remote control, AC Power cord

Design and specifications are subject to change without notice.

-20-

Appendix

1.

Do NOT attempt to install the TV by yourself to avoid mistakes or hazard. Refer all

1.

Take out the brackets from the package, and check if there are serious defects

-21 -

Appendix mm

-22-

advertisement

Related manuals

Download PDF

advertisement