Creda Heating Solution Brochure

2008/2009 Product Directory

Heating Solutions

Uniclass L7522

Cl/SfB

(56)

EPIC L22

2

Creda Heating

Introducing the fuel of the future!

“

For over 40 years Creda has been dedicated to heating the nation. In the future low carbon electricity will make electric heating the first choice for a lower carbon footprint and low lifetime cost of ownership.

”

Our heating technology has been developed with today’s lifestyles in mind, so attention to style as well as efficiency and economy are paramount. At Creda we never forget, however, that safety is the number one concern.

With a renowned safety record, ease of installation or upgrade, virtually no maintenance and low cost of ownership, electric heating continues to grow in popularity in the UK and across the world.

As electricity generation gets ever greener, the world is turning to electric heating. In the UK our heating products are designed to comply with Part L of the Building Regulations which focuses on reducing carbon emissions and the conservation of fuel and power. For more details on meeting these regulations see pages

6 & 7 of this brochure. For advice on helping to save the Earth by saving energy and saving money too - see the guide at the back of this brochure.

Our advanced heating control options assist in achieving the best possible SAP ratings. (SAP is the Standard Assessment

Procedure for energy ratings and is also used within Part L).

As pioneers in electric heating, we continue to lead the field with innovative and contemporary product design, backed by nationwide after-sales support and a dedicated specification team.

We are here to help you develop the most effective, economical and environmental heating solution.

Welcome to the fuel of the future!

TPRIII Electronic pilot plus panel heaters with plug-in timer options or 4 zone central control.

Proline II Ladder style electric towel rails with fast response heating technology.

Eco-Response storage radiant heaters offer advanced heating technology with rapid response, touch temperature control.

Index

Introduction

Advanced control heating systems

Electric storage heating

3

Underfloor heating

& fan heaters

Commercial space heating

Technical information

43

Towel rails & bathroom warmers

Creda Heating Introducing the fuel of the future!

Creda Heating A low carbon future

Creda Heating Design application support

Meeting Part L The quick start guide!

Eco-Response Intelligent heating technology / Storage radiant heaters

Contour100 Electronic panels

TPRIII E Electronic pilot plus panel heaters

TPRIII M / MT Mechanical thermostatic panel heaters

TPRIII NC No controls panels

Newera Style Panel heaters

Newera Electronic Panel heaters

Newera Plus Panel heaters

RF Electronic radio frequency panels and control options

Control Options

Sensair Automatic Electric storage fan heaters

TSR Supaslim Combi Storage fan heaters

TSR Sensor Plus & Slimline Electric storage heaters

TSF Turbo Commercial storage fan heaters

Storage Heater Accessories

Outline Thermostatic integral control towel rails

Proline II PL Fast response electric ladder towel rails

TD Traditional style electric towel rails

Solarail and LRC Electric towel rails

CDF Compact Downflow fan heaters

PH2 Electric plinth heaters for base units

Soleglow Underfloor electric heating

Sunplus Outdoor patio heaters

Sunquartz Shortwave infra-red radiant heaters

Ceramic Emitters Long wave infra-red heaters

Sunslim Commercial radiant heaters

Suntube Tubular heaters

Sunfan High level fan heater

Sunscreen Warm air curtains

Creda Heating Cable and connection points

Sizing Guide Storage and panel heaters

Sizing Guide Commercial space heaters

Design Request Application Design Survey Information Sheet

Good Practice Helping you save energy

27

28-29

30

31

32

33

34

22

23

24

25

26

8-9

10-11

12-13

14

15

16

17

17

18-19

20-21

5

6-7

2

4

42-43

44

45

46

47

39

40

41

35

36

37

38

+44 (0) 1733 456789 www.creda-heating.co.uk

3

Creda Heating

A low carbon future

a low carbon future.

“

Creda continues to invest in the bright future of electric heating. The 2008 Energy Bill promoted the production of heating from low carbon electricity, as ever more central generation flows from low carbon sources.

”

4

Low carbon electricity, generated here in the UK and not imported from around the world, gives us security of energy supplies and contributes to reducing the devastating impact of climate change.

Low carbon electricity provides low carbon heating from electric panel and storage heaters. Creda are at the forefront of these developments with the latest technology, advanced energy-saving controls and contemporary styling to suit the homes of today.

Part L and SAP

(Standard Assessment Procedure)

The April 2006 revision to Part L of the Building Regulations requires that all new buildings do not exceed a Target Carbon

Emission Rate (TER) as measured by a Standard Assessment

Procedure (SAP). For more details on how to comply see our

‘quick start’ guide on pages 6 & 7 of this brochure.

Every day, across the country, we design electric heating systems that improve SAP scores and achieve full compliance with Part L of the Building Regulations for buildings of all shapes and sizes.

See page 5 for information on how!

Decent Homes and Sustainable Communities

By 2010, the government has committed to bring 95% of all social housing in the UK into a decent condition and the remainder are to be improved soon after.

The new Housing and Regeneration Bill has also committed the government to building 3 million new affordable and sustainable homes by 2020. The provision of modern facilities are along with the building improvements required to meet this legal obligation, brings energy efficiency to the fore. Improved air-tightness combined with new heating systems, kitchen and bathroom facilities and effective ventilation strategies will all be needed.

Our sister brand Redring has a successful track record in providing affordable hot water and showering into Decent Homes projects (see www.redring.co.uk) and Xpelair are experts in the field of low carbon ventilation, with the Xpelair Carbonlite boasting a range of low energy and long-life product

(see www.xpelair.co.uk). Here at Creda we are the heating experts.

Warmth is a pre-requisite of decent housing and low carbon electricity is the route to sustainable communities. We believe electricity is the fuel of the future; homes built today may well last

60 to 100 years, so we must build for the future today!

Creda electric heating can meet and exceed the needs of the

Decent Homes Standard. Our website provides on-line help, tutorials and CPD accredited courses for those wishing to ensure their development is compliant with the regulations.

Creda on the web

Visit www.creda-heating.co.uk for downloads, brochures, product specifications and more information on Part L, SAP and the

Decent Homes Standard.

+44 (0) 1733 456789 www.creda-heating.co.uk

Creda Heating

Design application support

Electric heating is cheaper than gas In recent times the proliferation of environmental legislation and revisions to Building Regulations, all designed to reduce carbon intensity and improve energy efficiency, have made the design process more complex. We are here to help with two levels of design service.

Level 1:

Our standard design service is free of charge and will provide a clear and simple indication of the products required and the associated costs. This service can be provided from basic plans and drawings.

Level 2:

Our enhanced design service incurs a very competitive fee to cover third-party costs and a small contribution to the work of our accredited SAP assessors. In return a dedicated assessor will provide schematic designs and confirmation of regulatory compliance including Part L of the Building Regulations and a

SAP score, as well as the product requirements and costs to achieve this. Full architectural drawings are required to complete this service and work cannot commence without them.

For further information send a description of your project, contact details and drawings to [email protected]

Annualised installation costs (based on manufacturers’ quoted average lifetimes and typical installation costs for 6 electric panels or 6 wet-radiators and a gas boiler).

Annual safety check and maintenance costs (to comply with manufacturers’ conditions of guarantee - using lowest priced British Gas service contract to include boiler, controls and radiators).

Annual fuel costs (based on guidance from the Energy Saving Trust publication

CE185 and Npower standard gas and electricity prices on Feb 10th 2008).

Low carbon electricity from renewable sources makes electric heating the fuel of the future; but already electric heating is cheaper than gas.

In recent times all energy prices have risen but none more so than gas. Creda electric heating is now cheaper over its entire lifetime than gas, when all the facts are considered.

Electric heating products cost less to buy in the first place and are quick and easy to install or upgrade. They offer total flexibility in the building design, with no complicated pipe runs, which also leave gaps in the building fabric; a problem when air-tightness is a key factor in improving the carbon footprint of a building and meeting Part L of the building regulations. Once installed, electric heating requires virtually no maintenance. Unlike gas there is no legal requirement for an annual landlord safety certificate.

Year in and year out, electric heating provides instant, responsive and safe heating on demand. Recent calculations have shown that when all these factors are taken into account there is a minimum overall cost saving of at least 13% a year in comparison to gas central heating.

Apartments and flats often favour electric heating for all these reasons. It is the simplest and most cost effective solution for many hotels, gyms, crèches, nurseries, surgeries, care homes, offices and shops all over the UK.

Technical services

Our technical services call centre is staffed by a team trained in diagnosing and rectifying potential concerns over the phone.

If for any reason they are unable to solve a problem by phone, they will brief an engineer on your behalf prior to the service visit to ensure that, wherever possible, the problem is fixed first time.

The team also provides advice on product selection, application, installation and operation; ensuring maximum value is gained from selecting a Creda heating product.

For further information:

Tel: 08709 000430 Fax: 08709 000530

The Building Centre

Building specifiers within easy reach of Central London can see a permanent exhibition of selected Creda products at the Building

Centre in Store Street, WC1E 7BT. The centre also offers a full library support and literature distribution service for visitors, to assist them in identifying the most appropriate products for any given application.

Details of the Building Centre can be seen by the following the link at www.creda-heating.co.uk

Application design

We have over 40 years experience in designing and supporting electrical heating installations. We are able to offer an expert application design service for all our products, helping new and existing customers alike to specify Creda products into real buildings and live projects, either off-plan, commenced new-build or refurbishments.

+44 (0) 1733 456789 www.creda-heating.co.uk

5

Meeting Part L

The quick start guide!

Xpelair Xcell 270

“

Electric heating continues to grow in popularity. In April 2006 the revision to Part L of the Building Regulations meant the way you comply for new buildings changed. This is the quick-start guide to complying with Part L.

”

All the old methods of compliance have been abolished and

What changed?

replaced with a Target Carbon Emission Rate (TER).

Block Assessment

Part L 2006 has important rules for setting and achieving the targets in flats and apartments. So called ‘Block Assessment’ allows for all the flats or apartments in a building to be assessed in one go.

Whatever fuel type you choose for the heating and hot water of your new building - gas, oil, LPG or electric - you have to show that the overall carbon emission rate is less than the target for that building type.

Each flat or apartment can be dealt with as the developer or specifier feels appropriate for meeting the overall TER, across the different floors and sides of the building. Any given flat or apartment does not have to meet an individual TER as long as the whole building does.

There are also new minimum standards for U-values and airtightness, which must be tested on completion of the building.

However, even meeting all the minimum standards will not guarantee a pass.

The biggest change is that under the new rules the whole building is taken into consideration. Every factor that can influence carbon emissions is relevant and it’s the whole building that must pass.

So just building to minimum standards may not guarantee a pass because the whole building may still exceed the target carbon emission rate.

This allows the developer or specifier flexibility in how to achieve the target. For example, mechanical ventilation with heat recovery

(see picture above) may be installed which would create carbon savings which can be shared out across the whole building.

It also reduces running costs and becomes a major selling feature. For more advice on saving energy see the guide at the back of this brochure.

What’s my target?

The target is set in terms of Kilograms of carbon dioxide for every square metre of the building, over the course of a year

(KgCO2/m 2 /yr).

A range of sample buildings is used to set the target, which is then adjusted for the size and shape of the actual design and the heating and hot water plan.

The complex calculation of both the target and the actual score of your new building can be performed within special SAP 2005 approved software. (The government’s adopted Standard

Assessment Procedure). An accredited SAP assessor is required to complete this.

Can you comply using electric heating and hot water?

Yes.

The only test for compliance is that the building does not exceed the target carbon emission rate. We continue to supply electric heating and hot water solutions into fully compliant buildings.

Electric heating has also been shown to have lower lifetime costs of ownership than gas, is easier and quicker to install, is maintenance free, offers great design flexibility and has lower initial capital costs.

Electric heating is the fuel of the future. Low carbon electricity from UK sources produces low carbon heating only with electric products.

The targets created under Part L 2006 demand a 20% reduction in carbon emissions compared with the previous rules. This new tougher target was set to improve the country’s energy efficiency and dependence on imported fuel and to reduce the devastating effects of climate change.

The tougher target applies to all relevant buildings, all products and all fuel types. It’s the whole building that must comply, not any given product or building service.

6

How do I reduce the carbon emission rate of a building?

There are a number approaches that are proving most effective at reducing the carbon emission rate of a building. We recommend you consider the following options. In isolation or in combination, all of these options have been used in conjunction with modern electric heating.

+44 (0) 1733 456789 www.creda-heating.co.uk

Meeting Part L

The quick start guide!

Creda Eco-Response

1 Improve the air-tightness:

It is now mandatory to test the air-tightness of a building on its completion.

There are minimum levels required under the new regulations but improving on these has been shown to be one of the best ways to reduce the carbon emission rate and therefore comply with Part L. Electric heating is helpful in this regard as it results in less holes and gaps in the building fabric than gas heating systems. The regulations require a minimum air-tightness of 10 cubic metres per hour per square metre of floor area at 50 Pascals of pressure.

(10m 3 /h/m 2 @ 50Pa). Many developments can now achieve 7 or 5 and some even 3m 3 /h/m 2 @ 50Pa.

2 Install mechanical ventilation with heat recovery:

Used in conjunction with improved air-tightness, so called MVHR recovers otherwise wasted heat and is a great advantage to the ventilation strategy.

There are specific provisions within SAP (Appendix Q) which show how using

MVHR can reduce the carbon emissions rate and help compliance with Part L.

Xpelair offers leading MVHR systems as part of the Carbonlite range, see www.xpelair.co.uk.

3 Improve the building fabric:

There are minimum U-values for all elements of the building fabric. U-values are a measure of how much heat energy can escape through a given element of a building. However, simply meeting these alone does not guarantee compliance.

By exceeding the minimum requirement significant improvements can be made on the carbon emission rate. It is possible to show compliance with Part L just by improving building fabric U-values. However, a combination of improved airtightness, MVHR and modest improvements in building fabric U-values has proved most cost effective in many building developments. Consider reducing

U-values for roofs to 0.14, walls to 0.3, floors to 0.2 and glazing to 1.8 but, generally speaking, the lower the better.

4 Consider glazing as a percentage of the building floor area:

The regulations assume that glazing coverage is equivalent to 25% of the floor area, which is more than most developments. Where this can be sensibly reduced it will improve the carbon emission rate of the building. If the specification of glazing is also improved the impact is increased. Consider gas filled or triple glazing.

5 Go renewable:

The installation of solar thermal hot water systems, heat-pumps or micro wind-turbines can have a number of major benefits. Often the installation of some of these products can turn an otherwise non-compliant building into a fully compliant one. However, many developers now also see this as the preferred route to meeting other planning requirements or aspirational targets for the use of micro-generation technologies. They can significantly reduce running costs and can be a great selling point. Redring offers one of the most efficient solar thermal hot water systems in the UK see www.redring.co.uk - and Xpelair has a world-class micro wind-turbine

(see www.xpelair.co.uk).

6 Improve the lighting plan:

In some buildings the carbon impact of the lighting can be significant and expert advice can assist in demonstrating compliance with Part L.

Modular lighting strategies should be considered. The traditional rules of thumb based on the number of rooms should give way to a recommended number of lighting points by square metre of floor area. It is good practice to install low energy fittings as standard indoors, with consideration given to highly effective control. Externally the regulations require a maximum 150W with automatic switch-off via PIR, photocell and timers.

7 Controllability reduces emissions:

It has been shown that easy to use, highly responsive heating systems actually reduce carbon emissions. When heating responds quickly it tends, in practice, to be used more effectively. Where controls are simple to use, people make better use of them. Modern electric heating is highly controllable and responsive. This is recognised within SAP. We offer leading edge electric heating with our Eco-Response technology. Integrated and sensitive thermostats within Creda electric heating products allow precise control room by room, ensuring solar gain is taken into account in maintaining a desired temperature and reducing carbon emissions.

8 Background heat:

By ensuring there is a low level background heat throughout the common walkways, like stairwells and landings in apartment blocks, adjoining walls are only considered semi-exposed for calculation purposes, reducing heat losses and improving the carbon emission rate. We offer modern electric heating solutions designed for this purpose.

9 Size the cylinder:

The regulations now assume a 170l water cylinder. By ensuring the cylinder is not oversized for its application, heat losses are reduced. If the cylinder size is reduced below 170l then the carbon emission rate is improved. Redring offers cylinders at 90, 125, 150 and 170 litre capacities, as well as larger sizes where necessary. See www.redring.co.uk for a full range of instant water heating products that have no standing losses at all!

Redring LWSS Stainless Steel Cylinder

+44 (0) 1733 456789 www.creda-heating.co.uk

7

Eco-Response

Intelligent heating technology

Advanced control heating systems

“

Eco-Response offers advanced electric heating for the future, challenging expected norms with superior efficiency and controllability.

”

Warmth where it's needed, when it's needed...

in a single room or across the house. A constant low level of background heat prevents the fabric of the building from cooling. On demand, this fast-acting appliance raises the temperature to meet your needs, providing total control and the peace of mind that comes with low running costs.

Key features

• Economical use of energy utilising the best of stored and direct acting heating technologies

• Contemporary design - looks good in any home

• Unobtrusive - takes up no more space than a traditional wet radiator

• One-touch electronic controls with child lock facility

• Simple ‘+ or -’ touch temperature control for accuracy and flexibility

• Rapid response to changing temperature demands

• Pre-wired with 2 x 1.6 metre lengths of cable for storage and direct acting power supplies - for ease of connection

• Designed for rapid assembly to keep installation costs down

• Requires no annual maintenance

• Optional central controller for 4 zone pilot wire linked heating system

Stored heat - maintains low level background heat to keep the fabric of the building warm, utilising economy off-peak electricity

Simple integral control on top of the heater - allows easy adjustment to achieve the user’s preferred comfort temperature

Radiant heat - rapidly raises temperature to required comfort level on demand

PART L and SAP 2005

The Creda Eco-Response has been developed to help meet the needs of Part L 2006 Building Regulations and provides enhanced

SAP scores.

Specifiers will benefit from the ‘integrated storage/direct acting heater’ category within table 4a of SAP 2005 which rewards the enhanced controllability of Eco-Response with a 100% efficiency rating, placing this leading technology in heating type 2 with a responsiveness weighting of 0.75.

300kg saving

Average carbon saving of up to 300kg per annum when compared to auto slimline storage heaters*

*Based on a semi-detached house with a floorspace of 130m 2

8

Product Selector

Model Reference

ER300

ER400

ER500

75 773301

75 773302

75 773303

PW E4ZC 75 770916

Nominal

Output

0.7kW

1.1kW

1.5kW

Charge

Acceptance

9.1kWh

13.65kWh

18.2kWh

4 zone pilot wire central controller

Input Rating

(Off Peak)

1.3kW

1.95kW

2.6kW

Input Rating

(Radiant Elt.)

0.28kW

0.34kW

0.39kW

Number of Elements

2

3

4

Number of Bricks

8

12

16

+44 (0) 1733 456789 www.creda-heating.co.uk

Weight

65kg

94kg

124kg

Eco-Response

Storage radiant heaters

Advanced control heating systems

Conventional heater

1

Eco-Response

1

It is smarter to maintain low level background heat.

2 3

With a conventional ‘wet’ heating system, when heating goes off, building shell cools.

The building shell has to then be warmed again before room feels comfortable.

This takes time and energy - slow response.

2 3

The room temperature can be raised quickly and efficiently when needed.

Economical.

Responsive.

Intelligent.

Technical Specification

• Elements (Storage) - 650W incoloy sheathed, mineral filled elements

• Element (Direct Acting) - cable-on-foil thin facia panel

• Thermostat (Input) - integral electronic charge limiter

Maximum core temperature 670 o C/690 o C at full charge

• Thermostat (Output) - integral electronic thermostat with child lock facility

• Thermal Insulation - Carbowool 128kg/m 2 , Microtherm G and calcium silicate

• Energy Retention Cells - high density bonded magnetite

• Protection (Storage) - automatic reset core limit thermostat and manual over-temperature cut out

• Protection (Direct Acting) - automatic reset limit thermostat and automatic reset over-temperature cut out

• Finish - white polyester and zinc coated steel with grey base

• Cable (Storage) - 1.6m 2.5mm

2 3 core

• Cable (Direct Acting) - 1.6m 0.75mm

2 2 core

• Supply - 230/240V AC single phase

Dimensions

Control options

4 zone pilot wire central controller

Allows 7 day programming of comfort/setback time settings of multiple pilot wire linked heaters in up to

4 separate zones.

Ref: 75 770916

Model Height A Width B

ER300

ER400

ER500

712mm

712mm

712mm

600mm

830mm

1060mm

Depth C

130mm+10mm

130mm+10mm

130mm+10mm

Feet Position D

295mm

523mm

751mm

Minimum clearance required

• 75mm either side of heater

• 150mm in front of the heater

• 250mm directly above the heater

Matching TPRIII E

Electronic panel heaters also available for pilot wire linked heating systems

(See page 12-13).

+44 (0) 1733 456789 www.creda-heating.co.uk

9

Contour100

Electronic panel heater

Advanced control heating systems

“

The all new Contour100 panel heater range offers high quality build and panel finish with contemporary radiator styling.

”

Contour100 panel heaters incorporate electronic thermostatic controls which allow very precise regulation of room temperatures.

Key features

• Contemporary radiator styling

• Electronic thermostatic control, accurate to +/-0.3

O C

• Convected heat for rapid warm up

• Silent operation

• Pre-set background temperature at 5 O C below thermostat setting

(when connected to a programming unit supporting setback feature)

• IPX4 rated (splashproof)

• Being electronic, control is totally silent and reliable

• Hidden thermostat range limiter feature - for additional economy

• Range of optional plug-in electronic timer modules, including:

- 24 hour digital timer

- Single zone 7 day pilot wire programmer

- Runback timer

• Compatible with Creda 4 zone pilot wire central controller

Technical Specification

• Elements - finned, mineral-filled sheath type

• Thermostat - electronic with 5ºC setback control capability

• Finish - white powder coated steel and thermoplastic

• Protection - auto reset thermal cutout

• Cable - 1.2 metres, 4 core (live, neutral, pilot and earth)

• IP rating - IPX4 (splashproof)

• Supply - 230/240V AC single phase

Dimensions

10

Product Selector

Model

CEP 500E

CEP 750E

CEP 1000E

CEP 1500E

CEP 2000E

Reference

75 775101

75 775102

75 775103

75 775104

75 775105

Rating

0.5kW

0.75kW

1kW

1.5kW

2kW

Height A

536mm

536mm

536mm

536mm

536mm

Width B

503mm

503mm

671mm

741mm

911mm

+44 (0) 1733 456789 www.creda-heating.co.uk

Depth C

104mm

104mm

104mm

104mm

104mm

Weight

12kg

12kg

15kg

17.5kg

22kg

Contour100

Electronic panel heater

Contour100 Electronic panel features

Advanced control heating systems

Control options

A range of optional plug-in control modules, which can be removed from the heater for easy programming, provide the flexibility for TPRIII to meet a wide range of control specifications:

• High quality build and panel finish

• Forward angled facing grille to assist heat circulation

• Electronic thermostat for accuracy

+2 O C

MECHANICAL

THERMOSTATS

MAY OVERSHOOT

BY UP TO 2 O C

ELECTRONIC

THERMOSTATS

ARE ACCURATE

TO ±0.3

O C

+1 O C

+0.3

O C

-0.3

O C

-1 O C

SET TEMPERATURE

-2 O C

Both Contour100 and TPRIII E electronic panel heaters feature highly accurate electronic thermostats (+/-0.3

O C), providing superior comfort and operating efficiency.

As the room temperature nears the desired set point, power to the elements is reduced. The room temperature is closely monitored to an accuracy of less than 0.3ºC, minimising overshoot and temperature drift, resulting in better energy efficiency and user comfort.

Control options

• TPR E24T 24 hour digital timer. Provides 24 hour programmable on/off control

• TPR E7DT single zone, pilot wire programmer controls up to 10 slave heaters.

Provides 7 day programmable on/off control

• TPR ERBT runback timer. Provides installer programmable runback time up to

4 hours (in 30 minute increments). Can be locked into heater

Dimensions

4 zone pilot wire controller Plug-in timer module

4 zone pilot wire central controller

Allows 7 day programming of comfort/setback time settings of multiple pilot wire linked heaters in up to 4 separate zones (see page 20).

Product Selector

Model

TPR E24T

TPR E7DT

TPR ERBT

PW E16A

PW E4ZC

Reference

75 770912

75 770913

75 770914

75 770915

75 770916

Product Description

24 hour plug-in timer module

7 day single zone plug-in timer module

4 hour run back timer plug-in module

16 amp pilot wire interface unit

4 zone pilot wire central controller

+44 (0) 1733 456789 www.creda-heating.co.uk

Height A

50mm

50mm

50mm

86mm

132mm

Width B

70mm

70mm

70mm

86mm

86mm

Depth C

145mm

145mm

145mm

22mm

38mm

11

TPRIII E

Electronic pilot plus panel heaters

Advanced control heating systems

“

The TPRIII Electronic pilot plus panel heater range - unites smooth styling with superior control performance options to give flexible heating solutions.

TPRIII Electronic pilot plus panel heaters incorporate

” electronic thermostatic controls to allow precise regulation of room temperatures - essential when comfort, economy and energy efficiency need to be considered in equal measure. To meet the needs of most applications the

TPRIII Electronic pilot plus panel heaters can also be controlled by a new range of plug-in timers or by pilot wired signalling from a 4 zone pilot wire central controller.

Key features

• Front facing grille for best possible heat projection

• Styling to complement Eco-Response radiators with pure white finish

• Electronic thermostatic control - +/-0.3ºC, completely silent operation

• Pre-set background temperature at 5ºC below thermostat setting

(when connected to a programming unit supporting setback feature)

• Optional plug-in electronic timer modules, including:

- 24 hour digital timer

- Single-zone pilot wire programmer

- Runback timer

• Compatible with Creda 4 zone, wall mounted pilot wire signalling multi-heater programmers

• IPX4 rated (splashproof)

• Hidden thermostat range limiter feature - for additional economy

• Simple detachable wall bracket for easy installation

Product Selector

Model

TPRIII 500E

TPRIII 750E

TPRIII 1000E

TPRIII 1250E

TPRIII 1500E

TPRIII 2000E

Reference

75774440

75774441

75774442

75774443

75774444

75774445

Loading

0.5kW

0.75kW

1kW

1.25kW

1.5kW

2kW

Height A

430mm

430mm

430mm

430mm

430mm

430mm

Technical Specification

• Element - finned, mineral-filled sheathed type

• Thermostat - electronic with fixed 5ºC setback facility

• Finish - white powder coated steel and thermoplastic

• Protection - auto reset thermal cut-out

• IP rating - IPX4 (splashproof)

• Cable - 1.2 metres, 4 core cable (live, neutral, pilot and earth)

• Supply - 230/240V AC single phase

Dimensions

Width B

450mm

620mm

620mm

690mm

690mm

860mm

Depth C

108mm

108mm

108mm

108mm

108mm

108mm

Weight

5.2kg

6.6kg

6.6kg

7.1kg

7.1kg

8.5kg

12 +44 (0) 1733 456789 www.creda-heating.co.uk

TPRIII E

Electronic pilot plus range controls

Advanced control heating systems

TPRIII E Electronic rotary thermostat

Improved economy may be achieved by limiting the thermostat rotational range, by means of the mechanical ‘peg and hole’ feature hidden beneath a removable cap on the thermostat knob.

Control Options

Pilot wire heating system

The PW E4ZC central controller allows 7 day programming for comfort and setback temperature periods of multiple pilot wire linked heaters in up to four separate zones.

• 4 Separate heating zones

• Heater modes - Comfort/Setback, Comfort/Frost or Comfort/Off

• Wall mounted mains powered controller with capacitor back up (approx. 4 hrs)

Zone 1 Zone 2

TPRIII E Electronic panel heaters will accept the same range of plug-in timer modules as Contour100 electronic panel heaters (featured on page 11).

Pilot wire auxiliary interface unit

Zone 3 Zone 4

240v mains supply

Dimensions

4 zone pilot wire controller

PW E16A Interface unit

Plug-in timer module

The PW E16A pilot wire auxiliary interface unit enables heaters without electronic controls to be central programmed, for on/off time periods only, as part of a pilot wire linked heating system.

(Max. 3kW. Requires a 38mm deep metal box or surface patress).

Product Selector

Model

TPR E24T

TPR E7DT

TPR ERBT

PW E16A

PW E4ZC

Reference

75 770912

75 770913

75 770914

75 770915

75 770916

Product Description

24 hour plug-in timer module

7 day single zone plug-in timer module

4 hour run back timer plug-in module

16 amp pilot wire interface unit

4 zone pilot wire central controller

+44 (0) 1733 456789 www.creda-heating.co.uk

Height A

50mm

50mm

50mm

86mm

132mm

Width B

70mm

70mm

70mm

86mm

86mm

Depth C

145mm

145mm

145mm

22mm

38mm

13

TPRIII M / MT

Mechanical thermostatic panel heaters

Advanced control heating systems

“

TPRIII mechanical thermostat panel heaters offer a versatile choice of models with built-in timer options or panels with no controls at all.

”

Popular with specifiers and contractors to complement

Creda electric storage heaters, TPRIII mechanical thermostatic panels are most commonly used to warm bedrooms, bathrooms, kitchens and other areas which only require heating for short periods of the day. Cost effective, they offer an efficient way to extend an existing heating system. The ranges come with control options to fulfil the widest range of applications, from single room background heating through to commercial applications.

Key features

• TPRIII (MT) models have programmable 24 hour timers

• TPRIII (MT7) model has a programmable 7 day timer

• TPRIII (NC) models with no built-in controls

• Full or half power output selection on thermostatic models

• Adjustable thermostat (5-30 O C) on thermostatic models

• Convected heat for rapid warm-up. Suitable for domestic or commercial use

• IPX4 rated (splashproof)

• Frost protection setting on thermostatic models

• 2kW model available with 7 day timer

• Front heat outlet grille for efficient heat circulation

• Lockable dust cover (on thermostatic models)

• Detachable hinged wall mounting bracket for fast installation and easy cleaning

Technical Specification

• Element - mineral-filled sheathed type

• Thermostat - capillary type (MT models only)

• Finish - white powder coated steel

• Protection - auto reset thermal cut-out

• IP rating - IPX4 (splashproof)

• Supply - 230/240V AC single phase

Dimensions

14

Product Selector

Model

Thermostat only models

TPRIII 500M

TPRIII 750M

TPRIII 1000M

TPRIII 1250M

TPRIII 1500M

TPRIII 2000M

Timer models 24hr

TPRIII 500MT

TPRIII 750MT

TPRIII 1000MT

TPRIII 1250MT

TPRIII 1500MT

TPRIII 2000MT

Timer model 7 day

TPRIII 2000MT7

Reference

75 774440

75 774401

75 774402

75 774403

75 774404

75 774405

75 774410

75 774411

75 774412

75 774413

75 774414

75 774415

75 774435

Loading

0.5kW

0.75kW

1kW

1.25kW

1.5kW

2.kW

0.5kW

0.75kW

1.kW

1.25kW

1.5kW

2.kW

2.kW

Height A

430mm

430mm

430mm

430mm

430mm

430mm

430mm

430mm

430mm

430mm

430mm

430mm

430mm

Width B

450mm

620mm

620mm

690mm

690mm

860mm

450mm

620mm

620mm

690mm

690mm

860mm

860mm

+44 (0) 1733 456789 www.creda-heating.co.uk

Depth C

108mm

108mm

108mm

108mm

108mm

108mm

108mm

108mm

108mm

108mm

108mm

108mm

108mm

4.8kg

6.2kg

6.2kg

6.6kg

6.6kg

8.0kg

8.0kg

Weight

4.8kg

6.2kg

6.2kg

6.6kg

6.6kg

8.0kg

TPRIII NC

‘ No controls panel heaters’

Advanced control heating systems

TPRIII Thermostatic panel heater ranges TPRIII No controls panel heater range

TPRIII M mechanical thermostat without timer

(500W - 2000W models).

TPRIII MT mechanical thermostat with 24hr timer

(500W - 2000W models).

TPRIII NC a range of panel heaters without any integral controls for use in applications where external control of temperature and time programming is required.

Technical Specification

• Element - mineral-filled sheathed type

• Finish - white powder coated steel

• Protection - auto reset thermal cut-out

• IP rating - IPX4 (splashproof)

• Supply - 230/240V AC single phase

Dimensions

TPRIII MT7 mechanical thermostat with 7 day timer

(available in 2000W model only).

Product Selector

Model

No controls models

TPRIII 500NC

TPRIII 750NC

TPRIII 1000NC

TPRIII 1250NC

TPRIII 1500NC

TPRIII 2000NC

Reference

75 774300

75 774301

75 774302

75 774303

75 774304

75 774305

Loading

0.5kW

0.75kW

1kW

1.25kW

1.5kW

2kW

Height A

430mm

430mm

430mm

430mm

430mm

430mm

Width B

450mm

620mm

620mm

690mm

690mm

860mm

+44 (0) 1733 456789 www.creda-heating.co.uk

Depth C

108mm

108mm

108mm

108mm

108mm

108mm

Weight

4.8kg

6.2kg

6.2kg

6.6kg

6.6kg

8.0kg

15

Newera Style

Panel heaters

Advanced control heating systems

“

The Newera Style provides a contemporary option for fully controllable heating in every room, with accurate twin electronic thermostats providing flexible control.

”

Safety and comfort feature highly in the design of the Newera Style, manufactured from composite material to provide a lower surface temperature without loss of convected heat with a unique outlet grille design that helps prevent wall discolouration.

Control options

Newera Style and Newera Electronic panel heaters may be connected as a centrally controlled system using the optional mains borne accessories.

The MB programmer communicates with the heaters and controls a comfort or setback thermostat as per the times set in the programmer.

MB Programmer Ref: 75 770907

MB Interface Ref: 75 770908 Key features

• Unique grille design to keep walls free of dust marks

• Composite construction for lower surface temperature without loss of convected heat

• Twin electronic thermostats for comfort and setback

• Mains borne and pilot wire control options

• IP24 rated (splashproof)

Allows 7 day programming of comfort/setback time settings of multiple pilot wire linked heaters in up to

4 separate zones.

4 zone pilot wire central controller

Ref: 75 770916

Integral twin electronic thermostats for setting comfort and setback temperatures.

Technical Specification

• Elements - finned, metal sheathed mineral filled type

• Thermostats - twin electronic

• Protection - two level thermal safety overheat

• Supply - 230/240V AC single phase

Dimensions

16

Product Selector

Model

PPH750

PPH1000

PPH1500

PPH2000

MBPRG

MBIF

PW E4ZC

Reference

75 772601

75 772602

75 772603

75 772604

75 770907

75 770908

75 770916

Rating

0.75kW

1kW

1.5kW

2kW

Newera MB programmer

Newera MB interface

4 zone pilot wire central controller

Height A

615mm

615mm

615mm

615mm

+44 (0) 1733 456789 www.creda-heating.co.uk

Width B

497mm

645mm

941mm

1163mm

Depth C

135mm

135mm

135mm

135mm

Newera Electronic and

Newera Plus Panel heaters

Advanced control heating systems

Electronic

Models only

“

The Newera Electronic and Plus panel heater ranges provide a choice of control options or stand alone heaters in sleek designs.

Newera Electronic

”

The Newera Electronic range provides style, flexibility and ease of use in buildings of

Key features

• Twin electronic thermostats for comfort and setback

• Can be used with mains borne or pilot wire any size. Built-in twin electronic thermostats controllers as part of a complete heating system allow control of comfort and setback temperatures. So panels can be used individually or can be linked to provide complete heating systems. A 7 day programmer can be added for the convenience of hassle-free heating matched to the way you use the space throughout the week.

• Compact, attractive design occupying minimum wall space

• Mains borne and pilot wire control options

• Hinged wall mounting bracket to allow easy access for cleaning and decorating

• IP24 rated (splashproof)

Technical Specification

• Elements - finned, metal sheathed mineral filled type

• Thermostats - twin Electronic

(Newera Electronic only)

• Thermostat - single mechanical

(Newera Plus only)

• Protection - two level thermal safety overheat

• Supply - 230/240V AC single phase

Dimensions

Newera Plus

A simple robust stand alone thermostatic panel heater. The Newera Plus range offers a low cost heating solution ideal for hotels or student accommodation.

Key features

• Single mechanical thermostat, stand alone heating

• Excellent value and simple to operate

• Robust construction and easy to install

• Compact - takes up minimal wall space

• Hinged wall mounting bracket to allow easy access for cleaning and decorating

• Ideal for conservatories, extensions, hotels and student accommodation

• IP24 rated (splashproof)

Single mechanical thermostat

Product Selector

Model

EPH500

EPH1000

EPH1250

EPH1500

EPH2000

PW E4ZC

MBPRG

MBIF

HPH750

HPH1000

HPH1250

HPH1500

Reference

75 772401

75 772402

75 772403

75 772404

75 772405

75 770916

75 770907

75 770908

75 772301

75 772302

75 772303

75 772304

Rating

0.5kW

1kW

1.25kW

1.5kW

2kW

Height A

450mm

450mm

450mm

450mm

450mm

4 zone pilot wire central controller

Newera MB Programmer

Newera MB Interface

0.75kW

1kW

1.25kW

1.5kW

450mm

450mm

450mm

450mm

+44 (0) 1733 456789 www.creda-heating.co.uk

Width B

370mm

445mm

520mm

590mm

740mm

370mm

445mm

520mm

590mm

Depth C

78mm

78mm

78mm

78mm

78mm

78mm

78mm

78mm

78mm

17

RF Electronic radio frequency controlled panels

Advanced control heating systems

“

The RF range offers a combination of slimline, flexible heater panels with non-wired control solutions; ideal for use in domestic and commercial applications.

”

Designed to offer economical, stylish and safe heating solutions, these compact panels can be used in conjunction with tailored accessories to provide the perfect heating solution.

A digital electronic thermostat uses integral drift compensation to ensure a stable and consistent room temperature and an on/off switch allows flexibility when heating is not required.

The RF panel range includes standard 400mm panels,

200mm plinth panels and splash-proof models to provide a complete heating solution for every room, including the bathroom.

Key features

• Local or central control meets Building Regulations Part L

(when used with Creda Saver or Zone Controllers)

• Electronic thermostat with drift compensation for accurate room temperature control

• RF/E406S and RF/E410S models are IP24 rated (splashproof)

• Non-wired signalling for total flexibility and ease of insulation

Technical Specification

• Elements - Finned, metal sheathed mineral-filled type

• Finish - Cream powder coated steel and thermoplastic

• Protection - Two level thermal safety overheat

• Supply - 230/240V AC single phase

Dimensions

18

Product Selector

Model

RF/E408

RF/E410

RF/E412

RF/E415

RF/E420

RF/E406S

RF/E410S

RF/E208

RF/E210

RF/E212

RF/E215

Reference

85510

85520

85530

85540

85550

85820

85840

85610

85620

85630

85640

Product Description

RF 400mm panel heater

RF 400mm panel heater

RF 400mm panel heater

RF 400mm panel heater

RF 400mm panel heater

RF 400mm panel heater (splashproof)

RF 400mm panel heater (splashproof)

RF 200mm panel heater (plinth)

RF 200mm panel heater (plinth)

RF 200mm panel heater (plinth)

RF 200mm panel heater (plinth)

Rating

0.8kW

1kW

1.2kW

1.5kW

2kW

0.6kW

1kW

0.8kW

1kW

1.2kW

1.5kW

+44 (0) 1733 456789 www.creda-heating.co.uk

Height A

400mm

400mm

400mm

400mm

400mm

400mm

400mm

200mm

200mm

200mm

200mm

Width B

645mm

735mm

915mm

1,095mm

1,365mm

555mm

735mm

1,095mm

1,275mm

1,545mm

1,725mm

Depth C

80mm

80mm

80mm

80mm

80mm

80mm

80mm

80mm

80mm

80mm

80mm

RF

Panel heater control options

Advanced control heating systems

A choice of innovative control options is available to suit both domestic and commercial applications.

Electronic thermostat:

• All RF panels feature integral electronic thermostat

• Drift compensation to maintain a stable room temperature

• Double pole on/off switch and overheat protection

• LCD display when element is energised

Creda Saver:

• Optional plug-in, programmable cartridge with

15 pre-set programmes

• Comfort mode thermostat on heater

• Integral setback thermostat

(Comfort thermostat on panel)

Creda Zone Receivers:

• Optional plug-in receivers for heaters, to enable control via Creda Zone controllers

• Integral thermostat for setback

• Automatic start up when communication is restored

• 433 MHz operating band

(Creda Zone 1 and 6 zone controllers)

• 868 MHz operating band

(Creda Zone 8 zone controller)

New Creda Zone 8:

• New controller for up to 8 zones (868 MHz)

• Time and temperature adjustment 24 hours a day,

7 days a week

• Frost protection setting (5-15°C)

• Setback temperature (5-20°C)

• Comfort temperature setting (5-30°C)

• Individual zone & measured zone temperature

LCD display

• Can be wall mounted or freestanding for hand held programming

• Battery operated (2 x AAA)

Creda Zone 1 and 6:

• Single or 6 zone controllers (433 MHz)

• Time and temperature adjustment 24 hours a day,

7 days a week

• Frost protection setting (5-15°C)

• Fall back temperature (5-30°C)

• Comfort temperature setting (5-30°C)

• Individual zone & measured zone temperature

LCD display

• Can be wall mounted or freestanding for hand held programming

• Battery operated (3 x AAA)

Product Selector

Model

CZ8N

CZRN

CZ6

CZ1

CZR

CZS

CZC

Reference

75770918

75770919

85710

85715

85711

85712

85713

Product Description

Creda Zone 8 RF controller (868 MHz)

Plug-in receiver (868 MHz)

Creda Zone 6 RF controller (433 MHz)

Creda Zone 1 RF controller (433 MHz)

Plug-in receiver (433 MHz)

Plug-in Creda Saver

Cover for controls

+44 (0) 1733 456789 www.creda-heating.co.uk

19

20

Control Options

The performance and economy of Creda heating products can be further enhanced by use of control options best suited to the type of installation and lifestyle requirements.

Creda controller for 4 zone pilot wire linked heating system

EcoResponse Storage

Radiant Heaters

Contour100

Electronic

Panel Heaters

TPRIII E Electronic

Panel Heaters

Pilot Wire Controller

Ref: 75 770916

Model: PW E4ZC

Newera Style

Electronic Panel

Heaters

Newera Electronic

Panel Heaters

Auxiliary heater interface for pilot wire linked heating system

Outline Thermostatic

Towel Rails

Pilot wire signalling - ideal control system option for new build applications

4 zone wall mounted central controller mains powered with 4hr backup

Number of heaters - up to 20 in the same zone

Controller features:

TIME - individual 7day programming of multiple time periods

MODES - on/off, comfort/setback or comfort/frost.

Also with manual override selection and holiday functions

Panel Heater features - integral electronic thermostat for comfort temperature selection with a fixed

5 O C setback from comfort, and frost protection at 5 O C

Outline towel rails feature - integral thermostat for comfort temperature, fixed 3-4 O C setback from comfort and frost at 7 O C. Also has manual override, 2hr boost and thermostat range restriction options

Pilot wire signalling - ideal control system option for new build applications

16amp interface unit - for auxiliary heaters without any integral controls

Number of heaters - single unit with up to 3kW maximum loading

Interface features - on/off switching only as signalled by the central controller

Installation - requires a 46mm deep single gang metal back box for flush mounting

Pilot Wire Interface

Ref: 75 770915

Model: PW E16A

Proline II PL

Electric Ladder

Towel Rails

TD Traditional Style

Electric Towel Rails

Solarail Electric

Towel Rails

Immersion heater downflow fan heater or plinth heater (3kW max)

Plug-in 7 day heater module for single zone pilot wire linked system

Pilot wire signalling - ideal control system option for new build applications

Single zone plug-in module controller mains powered by panel with 12hr backup

Number of heaters - up to 10 slave panels pilot wire linked in a single zone

Timer features - 4 on/off time periods for weekdays and 4 for weekends. Also has key lock and ‘advance to next programme’ functions

7 Day Timer Pilot Wire

Ref: 75 770913

Model: TPR E7DT

TPRIII E Electronic

Panel Heaters

Contour100

Electronic

Panel Heaters

Plug-in 24 hour timer module for single heater control

Single heater control - not system linked

24 hour plug-in timer module - mains powered by panel with 12hr backup

Number of heaters - single heater control only

Timer features - 4 on/off time periods in 24hrs

Additional features: key lock and ‘advance to next programme’ functions

24 Hour Timer

Ref: 75 770912

Model: TPR E24T

TPRIII E Electronic

Panel Heaters

Contour100

Electronic

Panel Heaters

Plug-in runback timer module for single heater control

Run Back Timer

Ref: 75 770914

Model: TPR ERBT

TPRIII E Electronic

Panel Heaters

Contour100

Electronic

Panel Heaters

Single heater control - not system linked

Runback plug-in timer module - mains powered by panel

Number of heaters - single heater control only

Timer features - on/off fixed runback time from

1/2hr up to a 4hr period (1/2hr increments selected at installation)

Special function - an alternative selection that switches from comfort to setback for an initial 24hr period, followed by comfort to frost

+44 (0) 1733 456789 www.creda-heating.co.uk

Control Options

MB Programmer

Ref: 75 770907

Model: PW E4ZC

RF 8 Zone

Programmer

Ref: 75 770918

Model: CZ 8N

Credasaver Plug-in

Programmer

Ref: 85712

Model: CZS

Plug-in timer module for single zone mains borne panel heating system

RF 6 Zone

Ref: 85710

Model: CZ6

MB Receiver interface

Ref: 75 770908

Model: PW E4ZC

RF Plug-in (433MHz)

Receiver Module

Ref: 85711

Model: CZR

Newera Style

Electronic Panel

Heaters

Central controller for 8 zone radio frequency panel systems

Newera

Electronic Panel

Heaters

Central controllers for 1 or 6 zone radio frequency panel systems

RF Plug-in (868MHz)

Receiver Module

Ref: 75 770919

Model: CZ RN

RF Electronic

Panel Heaters

RF Electronic

Plinth Heaters

Plug-in single heater 7 day programmable timer module (with setback)

RF Electronic

Panel Heaters

RF Electronic

Panel Heaters

RF Electronic

Plinth Heaters

RF Electronic

Plinth Heaters

Mains borne signalling - no additional signal cabling required ideal for retro fit installations

Single zone plug-in programmer - powered by panel with battery backup

Number of heaters - any number of panels each with an receiver interface unit fitted

Controller features - 3 separate time clocks with hourly on/off period selection over 24hrs. Each can be allocated to one or more days of the week

Panel heater features - integral twin linked electronic comfort and setback thermostats

Radio frequency signalling - 433MHz wireless signalling ideal for retro fit installations

Single or 6 zone RF programmers - wall mounted or free standing, battery powered (2 x AA batteries)

Number of heaters - any number of RF panels with plug-in 433MHz receiver modules fitted

Controller features: full time and temperature adjustment with override and holiday functions.

TIME - 7day, multiple time period setting for each zone

TEMPERATURE - level settings: frost (5-15 O C), setback (5-30 O C) and comfort (5-30 O C)

Panel heater features - integral digital electronic thermostat

Radio frequency signalling - 868MHz wireless signalling ideal for retro fit installations

8 zone RF programmer - compact wall mounted or free standing, battery powered (2 x AAA batteries)

Number of heaters - any number of RF panels with plug-in 868MHz receiver modules fitted

Controller features: full time and temperature adjustment with override and holiday functions.

TIME - 7day, multiple time period setting in each zone

TEMPERATURE - level settings (frost 5-15 O C),

(setback 5-30 O C) and (comfort 5-30 O C)

Panel heater features - integral digital electronic thermostat

Single heater control - not system linked

7 day plug-in programmer module mains powered by the panel heater

Number of heaters - single heater control only

Programmer features:

15 pre-set programmes over a 7 day period.

Integral setback thermostat (5-20 O C)

Panel heater features - integral digital electronic thermostat for comfort setting (5-30 O C)

RF remote thermostat / programmer kits for auxiliary appliances

Radio frequency signalling - wireless signalling between thermostat/programmer unit and the receiver at the heater

Number of heaters - multiple heaters with receivers fitted up to a maximum total loading of 2kW

Thermostat unit features - push on/off rotary control (5 O C -30 O C) with 30 minute boost

Thermostat with programmer unit -

4 programmable on/off time periods for weekdays and weekends. LCD display with 12hr backup memory RF Thermostat &

Receiver Kit

Ref: 75 770917

Model: RFRTK

RF Thermostat &

Programmer & Receiver

Ref: 75 770920

Model: RFRTK7

RF Receiver

Ref: 75 770920

Model: RFRTK7

Towel rails, Plinth Heaters and other heaters without controls

+44 (0) 1733 456789 www.creda-heating.co.uk

21

SFHA Sensair Automatic

Electric storage fan heaters

Electric storage heating

“

The ultimate combination of storage and direct fan heating. Able to regulate input with direct acting heat flexibility, the

SFHA Sensair is more effective at retaining heat than a conventional storage heater.

”

Able to operate on virtually any tariff and with superior high performance insulation levels, it achieves higher SAP and NHER ratings than manual input storage heaters.

Key features

• Combines electric storage fan heating, direct acting heating and fanned heat output with simple controls

• Fully automatic heat storage - no user adjustment required on input controls

• High performance insulation works more effectively than a conventional storage heater

• Heat output is via a quiet two speed fan

• Boost setting for high speed room heat up

• Fan can be switched off without altering thermostat setting

• Operates on virtually any tariff and takes better advantage of extended or split tariffs

• Fanned heating avoids heat stratification

• Lockable controls cover

• Negative pressure air movement through the storage core avoids hotspots and heat leakage

Dimensions

Technical Specification

• Elements (storage) - mineral insulated stainless steel sheathed

• Insulation - opacified silicaceous aerogel and mineral fibre mat

• Storage Core - high density iron oxide compound

• Fan Unit - two speed crossflow fan

• Controls (Output) - regulated by fan, activated by integral adjustable thermostat

• Controls (Input) - hydraulic head temperature compensated, room and storage core temperature sensitive, auto-set charge control

• Protection - two level thermal safety overheat

• Supply - 230/240V AC single phase

22

Model Height A

SFH18AW 705mm

SFH24AW 705mm

Width B

788mm

1016mm

Depth C

187mm

187mm

Product Selector

Model Reference

SFH18AW

SFH24AW

70305

70315

Rating

Storage

2.5kW

3.4kW

Direct

Acting

1.5kW

1.5kW

Charge

Acceptance (7 hrs)

17.6kWh

23.5kWh

Net Storage

14.9kWh

20kWh

Weight

121kg

158kg

Number of Elements

3

4

Number of

Core Bricks

12

16

Remaining Useful Heat* (Fan Off)

After 17hrs (Static) Discharge

40%

40%

+44 (0) 1733 456789 www.creda-heating.co.uk

TSR Supaslim Combi

Storage fan heaters

Electric storage heating

“

The Creda Supaslim

Combi heater is designed to combine economic and has efficient storage heating using low-cost tariff electricity with an independently thermostatcontrolled fan heater.

”

Effectively two heaters in one, the built-in fan can provide heat on its own or in combination with the storage heater for a rapid boost to room temperature.

Key features

• Combines economic tariff rate storage heater with a fast and responsive Warmflow fan heater for instant room heating

• The slimmest storage combination heater available

• Sensamatic fully automatic storage heater output ensures room comfort levels are maintained throughout the day without user intervention

• The Warmflow fan heater has manually adjustable room temperature sensing thermostatic control accurate to within 0.5°C

• Warmflow gives better heat distribution, helping to avoid heat stratification

• Quiet, low velocity Warmflow fan

• All controls are concealed behind a lockable flap

• CW range manually adjustable hydraulic charge control thermostat

• ACW range has hydraulic input charge control thermostat providing auto-set input charge control

• Fan heater ratings can be set on full or half load (installation option)

• Automatic fan heater switch-off during off-peak tariff periods (installation override option)

Technical Specification

• Elements (storage) - mineral insulated stainless steel sheathed

• Insulation - opacified silicaceous aerogel and mineral fibre mat

• Storage Core - high density iron oxide compound

• Fan Unit - crossflow

• Controls - hydraulic head temperature compensated, room and storage core temperature sensitive, auto-set charge control

• Protection - two level thermal safety overheat

• Supply - 230/240V AC single phase

Dimensions

Model Height A

TSR12CW/ACW 760mm

TSR18CW/ACW 760mm

TSR24CW/ACW 760mm

Width B

560mm

788mm

1016mm

Depth C

170mm

170mm

170mm

Product Selector

Model Reference

TSR12CW

TSR18CW

TSR24CW

TSR12ACW

TSR18ACW

TSR24ACW

79348

79358

79368

75 772001

75 772002

75 772003

Rating

Storage

1.7kW

2.5kW

3.4kW

1.7kW

2.5kW

3.4kW

Direct

Acting

1/0.5kW

1.5/0.75kW

2/1kW

1/0.5kW

1.5/0.75kW

2/1kW

Charge

Acceptance (7hrs)

11.8kWh

17.6kWh

23.5kWh

11.8kWh

17.6kWh

23.5kWh

Net Storage

12.6kWh

18.5kWh

25.0kWh

12.6kWh

18.5kWh

25.0kWh

Weight

78kg

114kg

149kg

78kg

114kg

149kg

+44 (0) 1733 456789 www.creda-heating.co.uk

Number of Elements

2

3

3

4

4

2

Number of

Core Bricks

8

12

16

8

12

16

23

TSR Sensor Plus & Slimline

Electric storage heaters

Electric storage heating

“

The Multi-sense system in the TSR Sensor Plus

(AW models) automatically controls heat storage to maintain the desired room temperature.

”

Working on any low-cost tariff, these heaters monitor the room temperature and energy stored within the heater core to avoid overcharging. This can save up to

15% of the energy used by ordinary storage heaters.

• All Multi-sense sensors are mounted within the heater

• Lockable controls cover

Technical Specification

TSR Slimline (MW) models offer the same range of sizes and outputs but with simple manual input and output controls.

• Elements (storage) - mineral insulated stainless steel sheathed

• Insulation - opacified silicaceous aerogel and mineral fibre mat

• Storage Core - high density iron oxide compound

• Controls* (Output) - manually adjustable thermostat controlling output damper.

• Controls (Input) - hydraulic charge control thermostat, manually adjustable

• Protection - two level thermal safety overheat

• Supply - 230/240V AC single phase

Key features

• Multi-sense two thermostatic sensor control system for heat storage and room temperature control

• The only storage heater available that automatically monitors and controls heat output through a thermostatic sensor

• Controls couldn’t be simpler - one for input and one for output

• Multi-sense system enables energy savings of up to 15%

• Multi-sense operates exclusively at maximum efficiency on all economy tariff periods

• Automatic control means little if any control adjustment - just set and forget

* TSR6AW/MW have no user controls and are IPX2 rated (drip-proof)

Dimensions

Model

TSR6A/MW

TSR12A/MW

TSR18A/MW

TSR24A/MW

Height A

705mm

705mm

705mm

705mm

Width B

335mm

560mm

788mm

1016mm

Depth C

170mm

170mm

170mm

170mm

Product Selector

Model Reference

TSR6AW

TSR12AW

TSR18AW

TSR24AW

TSR6MW

TSR12MW

TSR18MW

TSR24MW

79331

79341

79351

79361

79334

79344

79354

79364

Rating

Storage

0.9kW

1.68kW

2.5kW

3.4kW

0.9kW

1.68kW

2.5kW

3.4kW

Charge

Acceptance (7 hrs)

6.3kWh

11.8kWh

17.6kWh

23.5kWh

6.3kWh

11.8kWh

17.6kWh

23.5kWh

Charge

Acceptance (8 hrs)

7.2kWh

12.6kWh

18.5kWh

25kWh

7.2kWh

12.6kWh

18.5kWh

25kWh

Weight

41kg

77kg

110kg

145kg

41kg

77kg

110kg

145kg of Elements

1

2

3

4

1

2

3

4

Core Bricks

4

8

12

16

4

8

12

16

24 +44 (0) 1733 456789 www.creda-heating.co.uk

TSF Turbo

Commercial storage fan heaters

Electric storage heating

“

Creda TSF Turbo storage fan heaters provide controlled output space heating with maximum economy and flexibility.

The heater retains up to 40% of its total stored heat after 17 hours, allowing the

” thermostatically controlled 2-speed centrifugal fan to deliver rapid and uniform heat.

Key features

• Smooth, rounded, modern appearance, compatible with today’s home and office décor

• TSF Turbo uses economy tariff electricity, operating particularly well on special daytime economy periods

• Available in 3.6kW, 4.8kW and 5.7kW models

• More controllable, providing heat quickly when required

• In-built direct element for out of season heating using day rate electricity

• Fanned heat is faster and more even in distribution, particularly near ground level

• Easy to use manual controls for room thermostat and economy charge

• Single or 3 phase installation capability

User controls

• Charge input control

• Neon switch for fan

• Neon switch for direct acting element

• Heat output control

Technical Specification

• Insulation - opacified silicaceous aerogel and mineral fibre mat

• Storage Core - high density iron oxide compound

• Storage Elements - mineral insulated stainless steel sheathed

• Protection - two level thermal safety overheat

• Supply - 230/240V AC single phase

Dimensions

Model

TSF24K

TSF32K

TSF42K

Height A

672mm

672mm

672mm

Width B

776mm

926mm

1076mm

Depth C

250mm

250mm

250mm

Product Selector

Model Reference

TSF24K

TSF32K

TSF42K

70369KS

70379KS

70389KS

Rating

3.6kW

4.8kW

5.7kW

Direct Acting

Element Load

0.7kW

1.1kW

1.5kW

Charge

Acceptance (7hrs)

25.2kWh

33.6kWh

39.9kWh

Charge

Acceptance (8hrs)

28.8kWh

38.4kWh

45.6kWh

Weight

137kg

176kg

215kg

+44 (0) 1733 456789 www.creda-heating.co.uk

Number of

Core Bricks

18

24

30

25

Storage Heater

Accessories

Electric storage heating

“

Creda are also able to offer a choice of heater accessories to complement the storage heater ranges.

”

Useful shelves for utilising space above the heater and rail attachment to warm towels and clothes.

TSR towel rails

• Available for TSR 6, TSR 12 and TSR18 auto and manual models

• Warms and drys towels safely

• Matching white finish

• Quick and easy to fit

• Supply complete with fixings

Storage heater shelves

• Available in four widths to cover all sizes of TSR storage heaters and SFHA storage fan heaters

• Matching white finish

• Quick and easy to fit

• Supply complete with fixings

Heater Guard Options

A range of guards, designed to protect against accidental contact with the hot surface of the heater, is available for Creda heaters from our suppliers:

Norfolk Industries, 95 Oak Street, Norwich NR3 3BP.

Please contact them direct:

Tel: 01603 667957 Fax: 01603 624265

Dimensions

Rail

Shelf

26

Product Selector

Model

TR6

TR12

TR18

SHS6

SHS12

SHS18

SHS24

Reference

79130WS

79140WS

79150W

79032S

79042S

79052S

79062S

Product Description

Storage heater towel rail attachment

Storage heater towel rail attachment

Storage heater towel rail attachment

Storage heater shelf

Storage heater shelf

Storage heater shelf

Storage heater shelf

Rating

TSR6A and TSR6M

TSR12A and TSR12M

TSR18A and TSR18M

TSR6

TSR12

TSR18 and SFHA18

TSR24 and SFHA24

+44 (0) 1733 456789 www.creda-heating.co.uk

Height A

226mm

226mm

226mm

140mm

140mm

140mm

140mm

Width B

391mm

618mm

826mm

405mm

630mm

858mm

1086mm

Depth C

Ø10mm

Ø10mm

Ø10mm

93mm

93mm

93mm

93mm

Outline

Thermostatic integral control towel rails

Towel rails & bathroom warmers

“

Outline heated towel rails are of the popular ladder style and, with outputs of up to 750W, they provide background heating as well as warm dry towels.

Key features

”

• 300W, 500W and 750W output rails

• High quality white or chrome finish

• Integral controls (Controls must be positioned outside of zones 0, 1 & 2)

• Digital electronic thermostat with range restriction and lock facility

• Pilot wire control compatible

• IP24 rated (splashproof)

Integral control features Control options

Technical Specification

• Element - cartridge type

• Control - digital electronic thermostat with boost facility

• Protection - thermal cut-out

• Supply - 230/240V AC single phase

Dimensions

• Push button - On/off with neon indicator

• Rotary - Thermostat with frost protection setting

• Rotary - Variable boost - time set 15 minutes,

30 minutes,1 hour or 2 hours

Product Selector

Model

OTRC300

OTRC500

OTRW500

OTRW750

PW E4ZC

Reference

75 772710

75 772711

75 772701

75 772702

75 770916

Outline towel rails can be pilot wire linked to a flash controller as part of a complete heating system.

Product Description

Outline 30 (chrome)

Outline 50 (chrome)

Outline 50 (white)

Outline 75 (white)

4 zone pilot wire central controller

Rating

300W

500W

500W

750W

+44 (0) 1733 456789 www.creda-heating.co.uk

Height A

855mm

1,300mm

815mm

1,225mm

Width B

550mm

550mm

550mm

550mm

Depth C

85mm

85mm

85mm

85mm

27

Proline II PL

Fast response electric ladder towel rails

Towel rails & bathroom warmers

Four sizes each in white or chrome, straight or curved rails

“

The new Proline II range of dry element ladder style towel rails provide much faster heat up than fluid filled models and are lighter and easier to install, with no chance of leaks.

technology and outstanding performance.

”

Featuring a patented fast response

Proline II towel rails are available in a choice of 16 models with chrome or white finishes and both and straight options.

Key features

• Fast response technology for a quicker warm up than conventional towel rails

• Provides more heat from a lower output so more energy efficient

• Even heat distribution - no cold spots

• Compact, slimline design

• Dry element technology - no leakage, no rusting

• Lightweight for faster, easier installation

• IPX4 rated (splashproof)

180W 220W

260W 360W

Product Selector

Model

Straight rail models

PL180SW

PL220SW

PL260SW

PL360SW

PL180SC

PL220SC

PL260SC

PL360SC

Reference

75 774502

75 774503

75 774504

75 774505

75 774512

75 774513

75 774514

75 774515

28

Description

Straight white

Straight white

Straight white

Straight white

Straight chrome

Straight chrome

Straight chrome

Straight chrome

Rating

180W

220W

260W

360W

180W

220W

260W

360W

Height A

610mm

610mm

843mm

843mm

610mm

610mm

843mm

843mm

+44 (0) 1733 456789 www.creda-heating.co.uk

Width B

453mm

602mm

453mm

602mm

453mm

602mm

453mm

602mm

Depth C

80mm

80mm

80mm

80mm

80mm

80mm

80mm

80mm

Weight

4.4kg

7.9kg

5.5kg

9.5kg

5.4kg

7.9kg

5.5kg

9.5kg

Proline II PL

Fast response electric ladder towel rails

Towel rails & bathroom warmers

Fast even heat distribution in minutes Control Options Technical Specification

• Element - silicone coated dry element type

• Control - cycling cutout

• Protection - Two auto re-set temperature limiters

• Supply - 230/240V AC single phase

RFRTK7 RF remote thermostat and programmer kit.

Enables thermostatic and time control using wireless signalling between the remote wall mounted thermostat and the receiver unit at the appliance

(Also available thermostat kit only see page 21).

Dimensions

Fluid-filled towel rail

New dry element rails

PW E16A Pilot wire auxiliary interface unit

Enables heaters without electronic controls to be central programmed, for on/off time periods only, as part of a pilot wire linked heating system (see page 20).

Product Selector

Model

Curved rail models

PL180CW

PL220CW

PL260CW

PL360CW

PL180CC

PL220CC

PL260CC

PL360CC

RF Thermostat kits

RFRTK

RFRTK7

RFRI

Pilot wire interface unit

PW E16A

Reference

75 774552

75 774553

75 774554

75 774555

75 774562

75 774563

75 774564

75 774565

75 770917

75 770920

75 770921

75 770915

Description

Curved white

Curved white

Curved white

Curved white

Curved chrome

Curved chrome

Curved chrome

Curved chrome

RF remote thermostat kit

RF thermostat and programmer

RF additional receiver unit only

Pilot wire auxiliary interface unit

Rating

180W

220W

260W

360W

180W

220W

260W

360W

2kW

2kW

2kW

3kW

Height A

610mm

610mm

843mm

843mm

610mm

610mm

843mm

843mm

+44 (0) 1733 456789 www.creda-heating.co.uk

Width B

453mm

602mm

454mm

602mm

453mm

602mm

453mm

602mm

Depth C

90-100mm

90-100mm

90-100mm

90-100mm

90-100mm

90-100mm

90-100mm

90-100mm

Weight

4.4kg

7.9kg

5.5kg

9.5kg

4.4kg

7.9kg

5.5kg

9.5kg

29

TD

Traditional style electric towel rails

Towel rails & bathroom warmers

“

Classically styled towel rails that warm and dry towels.

All models offer low energy use whilst maintaining superior heat output.

”

Permanently liquid filled for maintenance free operation the TD towel rail range offers chrome and white options, ideal for drying and airing small towels in areas such as kitchens, cloakrooms and ensuite bathrooms. The TD towel rail can be left switched on indefinitely with the low wattage cartridge element providing economical operation.

Key features

• 60W or 80W models

• Available in white or chrome finishes

• Oil filled for even heat transfer

• Mains neon indicator

• IPX4 rated (splashproof)

• Supplied with wall mounting brackets as standard

• Durable white stove enamel or chrome plated

• Can be mounted for left or right hand cable entry

Control options

RFRTK RF remote thermostat kit.

Enables thermostatic control of electric towel rails using wireless signalling between the remote wall mounted thermostat and the receiver unit at the appliance. (see page 21).

Technical Specification

• Element - cartridge type

• Cycling thermostat

• Protection - thermofuse

• Supply - 230/240V AC single phase

Dimensions

30

Product Selector

Model

TD60W

TD60C

TD80W

TD80C

Reference

75 774601

75 774611

75 774602

75 774612

RFRTK 75 770917

Product Description

TD towel rail (white)

TD towel rail (chrome)

TD towel rail (white)

TD towel rail (chrome)

RF remote thermostat kit

Rating

60W

60W

80W

80W

-

+44 (0) 1733 456789 www.creda-heating.co.uk

Height A

616mm

616mm

851mm

851mm

-

Width B

533mm

533mm

533mm

533mm

-

Depth C

93mm

93mm

93mm

93mm

-

Solarail and LRC

Electric towel rails

Towel rails & bathroom warmers

Solarail

“

Solarail and LRC electric and dry element towel rails offer a choice of large surface area to ultra compact towel rails to satisfy all requirements.

”

LRC electric towel rails Solarail dry element towel rails

Designed for towel drying in the bathroom, shower room or even kitchen areas, Solarails are compact enough to fit in the smallest of spaces.

A range of ladder style fluid-filled towel rails finished in chrome. All models offer low energy usage whilst maintaining superior heat output.

Key features

• Dry element towel rails with a choice of 50W,

85W and 100W outputs

• Supplied with mains cable and mounting brackets for easy installation

• Finished in white or chrome

• IPX4 rated (splashproof)

Key features

• Fluid filled for even heat distribution

• 22mm rail diameter

• Triple layer corrosion protection

• Unique styling complements a range of décor

• Maximises power distribution to optimise energy usage

• Highly polished finish

• High impact ABS support brackets

• IP55 rated (water jets)

• Easy to install - complete with fittings

• Designed for durability

50w

LRC

Technical Specification

• Elements - cartridge type (LRC)

• Flexible cable type (Solarail)

• Cycling thermostat

• Protection - thermofuse

• Supply - 230/240V AC single phase

Dimensions

Product Selector

Model

LRC3

LRC5

CSR50W

CSR50C

CSR100W

CSR85C

Reference

86060

86080

51 805702

51 805701

51 805303

51 805314

Product Description

Ladder Rail (chrome)

Ladder Rail (chrome)

Solarail 50 (white)

Solarail 50 (chrome)

Solarail 100 (white)

Solarail 85 (chrome)

Rating

140W

175W

50W

50W

100W

85W

+44 (0) 1733 456789 www.creda-heating.co.uk

85w & 100w

Height A

1,000mm

1,200mm

410mm

410mm

570mm

570mm

Width B

500mm

600mm

460mm

460mm

710mm

710mm

Depth C

110mm

155mm

85mm

85mm

100mm

100mm

31

CDF

Compact downflow fan heaters

Underfloor heating

& fan heaters

“

Fast response downflow heaters offer a low cost solution for rapid heating on demand.

• Pull cord operated

Technical Specification

”

• Element - stitched ‘black heat’ type

• Protection - thermal cut-off and safety overheat

• Power on neon indicator

Available in three models, they are ideal for bathroom, shower room, kitchen, conservatory or garage locations.

• Thermostat - mechanical bi-metal type (CDF2T only)

• Weight 1.45kg

• Two integral safety devices

• Supply - 230/240V AC single phase

Key features

• 1kW constant heat (CDF1)

• 2kW with rotary variable thermostat (CDF2T)

• 2kW steps back to 1kW after warm up (CDF2)

Dimensions

Electrical products installed in bathrooms

Heating products installed in Zone 2 of a bathroom must carry an IP rating of at least IPX4 (IPX5 if water jets are going to be used in that area).

All electrical products must be connected in compliance with IEE wiring regulations (17th edition) and the circuit protected by an RCD.

Product Selector

Model

CDF1

CDF2T

CDF2

Reference

75 771002

75 771003

75 771001

Product Description

Compact downflow (constant)

Compact downflow (variable thermostat)

Compact downflow (pre-set step down)

Rating

1kW

2kW

2kW

Height A

240mm

240mm

240mm

Width B

235mm

235mm

235mm

Depth C

135mm

135mm

135mm

32 +44 (0) 1733 456789 www.creda-heating.co.uk

PH2

Electric plinth heaters for base units

Underfloor heating

& fan heaters

Manual model (white fascia fitted)

“

Small and compact, plinth heaters provide effective warmth to a cold floor and rapidly heat the room, with 3 fascia choices in every box.

”

The plinth heater will heat a room much faster than a traditional radiator many times its size but will not occupy valuable wall space. The heater sits neatly in kitchen base units, reception desks, shop counters and even stair risers to provide an unobtrusive flow of warm air at floor level.

Available with integral controls or hand held infra-red remote control. Each model comes complete with white, brown and silver fascias to complement modern room designs.

Remote model (silver fascia fitted)

No controls model (brown fascia fitted)

PH2TR supplied complete with hand held on/off infra-red remote control.

Control options

Key features

• Choice of 3 models: manual, remote or no controls

• Each model comes complete with white, brown and silver fascias

• Automatic over temperature cut out

• Maximum output of 2kW

(1kW on TM and TR models)

• Low noise fan only option for cool air circulation

(on TM models)

• Easy slot in profile (no metal sleeve required)

RFRTK RF remote thermostat kit.

Enables thermostatic control using wireless signalling between the remote wall mounted thermostat and the receiver unit at the appliance.

Product Selector

Model

PH2TM

PH2TR

PH2NC

Reference

75 774701

75 774702

75 774703

RFRTK

RFRTK7

RFRI

75 770917

75 770920

75 770921

Rating

2kW

2kW

2kW

2kW

2kW

2kW

Technical Specification

• Element - stitched ‘black heat’ type

• Fan - crossflow type

• Thermoplastic body

• Powder coated fascias white, brown and silver

• Weight 2.5kg

• Supply - 230/240V AC single phase

Dimensions

Product description

Plinth heater 2kW thermostatic manual

Plinth heater 2kW thermostatic remote

Plinth heater 2kW no controls

RF remote thermostat kit

RF remote thermostat and programmer

RF additional receiver unit only

+44 (0) 1733 456789 www.creda-heating.co.uk

Height A

100mm

100mm

100mm

-

-

-

Width B

400mm

400mm

400mm

-

-

-

Width C

200mm

200mm

200mm

-

-

-

33

Soleglow

Underfloor electric heating

Underfloor heating

& fan heaters

“

Soleglow underfloor heating gently dissipates into the room, giving an even, draught-free and comfortable warmth.

”

Independent tests have shown that if your feet are warm, the air temperature in your room can be set a few degrees lower without affecting how you feel. A reduction of 2-3 degrees will make a dramatic impact on the amount of energy that is used, resulting in much lower fuel bills.

With a low capital cost and easy installation, underfloor heating can be a very attractive proposition. But combine this with the clean, even and draught free heat produced, and with no unsightly radiators to collect dust and hamper future redecoration, then the arguments in favour of Soleglow become very attractive.

Typical undertile installation

Control options

Advanced multi-controller allows

7 day programming of ‘on/off’ times, comfort and set-back temperatures.

Multi-Controller (optional)

Ref: 75 771202

What size heating mat?

Making sure the correct sized mat is ordered is essential. Underfloor heating does not go under permanent furniture.

The bathroom below is 1800mm long by

2500mm wide, this equals 4.5m

2 of floor area but the actual amount of underfloor heating required is only 2m 2 .

2.5m

1.6m

1.4m

1.1m

Add the lengths of runs i.e. 1.6 + 1.4 +

1.1 = 4.1 metres. Calculate the m 2 , multiply overall length (4.1) by mat width (0.5m),

4.1m x 0.5m = 2.05m

2 .

Never select a mat larger than this area.

In this case you would select the

2.0m

2 mat.

34

Product Selector

Model

CSG1

CSG1.5

CSG2

CSG2.5

CSG3

CSG4

CSG5

CSG6

CSG7

Reference

75 771101

75 771102

75 771103

75 771104

75 771105

75 771106

75 771107

75 771108

75 771109

CSGMC 75 771202

Rating

160W

240W

320W

400W

480W

640W

800W

960W

1120W

Area

1m

2

1.5m

2

2m

2

2.5m

2

3m

2

4m

2

5m

2

6m

2

7m

2

Soleglow Multi-Controller (7 day programmer)

Length

2,000mm

3,000mm

4,000mm

5,000mm

6,000mm

8,000mm

10,000mm

12,000mm

14,000mm

+44 (0) 1733 456789 www.creda-heating.co.uk

Width

500mm

500mm

500mm

500mm

500mm

500mm

500mm

500mm

500mm

Depth

3mm

3mm

3mm

3mm

3mm

3mm

3mm

3mm

3mm

Sunplus

Outdoor patio heaters

Commercial space heating

“

The new Sunplus outdoor heater provides a safe, efficient and easy answer for outdoor heating.

”

Sunplus heaters give instant heat, are quick to install and only require minimal maintenance, contrasting gas patio heaters, which also have bulky and costly gas bottles to deal with. Sunplus heaters give heat at the flick of a switch and heat like the sun. The radiant heat passes through the air and heats solid objects making it highly efficient wherever it’s installed, making them the ideal outdoor heating solution.

The heaters transmit harmless infra-red radiant energy, like the sun, that turns into heat only when it comes into contact with a solid object such as people.

So you’re not heating the atmosphere or having the heat blown away in the wind unlike outdoor gas heaters.

• Low capital cost as these heaters allow you to select fewer heaters, but place them exactly where the heating need is

• When used with PIR sensors, further energy savings are available

Gold finish halogen lamp

The gold quartz halogen lamp fitted to the Sunplus runs at up to 2,200°C and offers extended performance and

15% greater transmission.

Control options

• Element - 2kW gold quartz halogen lamp

• Finish - high quality aluminium case in silver

• Reflector - high performance polished reflector

• Fitted guard included

• IP rating - IP24 (splashproof)

• Supply - 230/240V AC single phase

Dimensions

Key features

• Low running costs as Radiant heat heats solid objects not the air

• Instant heat cuts the cost of outdoor heating overall

• Silent running with no moving parts or noisy naked flames

Sunquartz autodriver

Product Selector

Model

CSP2

CSQAD

Reference

75 775201

85 822084

Rating

2kW

Product description

Sunplus outdoor patio heater

Sunquartz autodriver PIR

+44 (0) 1733 456789 www.creda-heating.co.uk

Height A

159mm

Width B

594mm

Width C

144mm

35

Sunquartz

Shortwave infra-red radiant heaters

Commercial space heating

“

Instant heat right where it’s needed. Sunquartz short wave infra-red heaters warm people, not the air.

”

Their uses are endless, from warehouses to churches. These efficient sun-like heaters can penetrate damp air with minimum heat loss to the atmosphere.

Key features

• Up to 90% efficient at converting electricity into energy

• Instant sensation of heat with visible glow at switch on

• Absolutely silent in operation

• Long range heat projection

• Modular design

• Lightweight and silent

• Fitted with wire guard for safety

• 1 and 2 lamp units are suitable for a 230-240V single phase supply

• 3 lamp units are supplied wired for single phase supply but can be connected to a 380-415 volt

3 phase supply

Control options

PIR automatic controller senses movement detected within its range and automatically switch on the heater which will remain switched on for a preset time.

The unit is suitable for 500W-6,000W single phase operation. Soft start circuitry is incorporated to reduce the inrush current, allowing cables and fusegear to be rated as for resistive loads and extending lamp life.

The PIR range is adjustable and a temperature hold-off facility will inhibit operation when ambient temperatures exceed a value selected between 10°C and 20°C.

Technical Specification

• Tungsten halogen lamps, 230/240V with ruby red quartz outer sleeve

• Reflectors bright rolled, specular 99.8% aluminium, electro-chemically brightened

• Electro zinc coated steel casing

• High pressure die cast aluminium end castings

• Epoxy polyester powder paint finish white/grey

• Supply - 230/240V AC single phase (3 lamp units can be connected to a 380/415V 3 phase supply)

Dimensions

Sunquartz autodriver

Ref: 85 822084

36

Product Selector

Model

CSQ1.5

CSQ2.0

CSQ3.0

CSQ4.0

CSQ4.5

CSQ6.0

CSQAD

Reference

75 771801

75 771802

75 771803

75 771804

75 771806

75 771807

Rating

1.5kW

2kW

3kW

4kW

4.5kW

6kW

85 822084 Sunquartz autodriver PIR

Number of lamps

1

1

2

2

3

3

Height A

185mm

185mm

370mm

370mm

555mm

555mm

+44 (0) 1733 456789 www.creda-heating.co.uk

Width B

390mm

390mm

390mm

390mm

390mm

390mm

Depth C

115mm

115mm

115mm

115mm

115mm

115mm

Ceramic Emitters

Long wave infra-red heaters

Commercial space heating

“

Long wave infra-red heaters offer highly efficient, silent, space heating.

”

These heaters incorporate dual ceramic emitters to rapidly convert electrical energy into heat energy without producing light.

With no moving parts, these heaters are virtually maintenance-free.

• Fitted with wire safety guards

• Robust fitting brackets

• Ideal for commercial and industrial application where glare free heat is required

Key features

• Durable ceramic emitters which rapidly convert electrical energy into heat energy

• Available in 2, 3 and 4.5kW versions

• No fans or moving components, so no dust contamination to the environment

• Low maintenance

• Good vibration resistance

Technical Specification

• Element - ceramic emitter

• Grey painted steel casing

• Supply - 230/240V AC single phase

Dimensions

Rating

2kW

3kW

4.5kW

Height A

1800

2500

3000

Height B

300

300

500

Height C

200

300

500

Ceiling

C

A

Floor

Ceiling

Floor

B

Area of coverage at minimum mounting height

Heating index

130-150W/m

2

150-170W/m

2

170-200W/m

2

220-240W/m

2

Applications

Shops, meeting halls

Offices, canteens

Workshops, garages

Churches

2kW

7.2m

2

6.8m

2

6.0m

2

4.7m

2

3kW

12.0m

2

11.3m

2

10.0m

2

7.8m

2

4.5kW

18.8m

2

17.7m

2

15.7m

2

12.3m

2

Product Selector

Model

CCR2

CCR3

CCR45

Reference

75 771701

75 771702

75 771703

Rating

2kW

3kW

4.5kW

Height A

340mm

340mm

440mm

+44 (0) 1733 456789 www.creda-heating.co.uk

Width B

376mm

376mm

376mm

Depth C

140mm

140mm

140mm

37

Sunslim

Commercial radiant heaters

Commercial space heating

“

Sunslim is a low cost, robust and easy to install radiant heater. Its tilt mounting allows heat to be localised, or directed to a general area.

”

The Sunslim can be wall-mounted or ceiling hung.

Key features

• Instant, directional radiant heat

• Available in 2kW and 3kW versions

• Completely silent in operation

• Lightweight and robust

• Corrosion resistant

• Suitable for bracket or chain mounting

• Easy to install

• Ideal for localised heating in large covered areas such as factories and workshops

Technical Specification

• Element - ‘black heat’ type

• Zinc coated steel body/matt black end caps

• Chrome plated steel guards

• Anodised aluminium reflector

• Supply - 230/240V AC single phase

Dimensions

• Minimum mounting height 2 metres

• 300mm minimum clearance above the heater

• 500mm minimum clearance on either side

• Installation notes: High temperature cable must be used. We recommend the use of a residual current device (RCD)

0.3

0.1

2.0

2.0

Sunslim - Minimum mounting distances

(met r es)

0.5

Sunslim heated area

Heating index

10

H

4.0

3kW

L

5.24

W

5.49

H

3.3

2kW

L

4.11

W

4.53

12

14

16

18

3.6

3.2

3.5

2.8

4.88

4.51

4.33

4.14

4.94

4.39

4.12

3.84

3.0

2.7

2.5

-

3.84

3.57

3.38

-

4.12

3.70

3.43

-

H = mounting height (determined by on-site requirements) L = length of the heated area W = width of the heated area

38

Product Selector

Model

CSL2

CSL3

Reference

75 771601

75 771602

Rating

2kW

3kW

Height A

108mm

108mm

+44 (0) 1733 456789 www.creda-heating.co.uk

Width B

1,215mm

1,671mm

Depth C

71mm

71mm

Suntube

Tubular heaters

Commercial space heating

“

Suntubes are the perfect answer where a steady energy efficient source of heat is needed, providing gentle background warmth and frost protection for both domestic and commercial applications.

”

They are highly effective as window demisters and for horticultural use,

Optional accessories

Ref: 85 731506 providing invaluable, effective heating and frost protection in greenhouses and conservatories.

Interlinking kit

Available for multiple installations

(100mm mounting centres).

Key features

• 60-360W outputs

• A range of 6 lengths and loadings

• Complete with universal mounting brackets for floor or wall fixing and 1m white cable

STG guards*

We recommend the use of guards for additional security in sensitive areas such as schools, hospitals and care homes.

These can be obtained from C.Ainao Ltd.

Tel: 020 7987 1184

Technical Specification

• Elements metal sheathed throughout

• Polyester epoxy powder coated aluminium body

• High temperature glass filled nylon end caps and brackets

• Supply - 230/240V AC single phase

Dimensions

Product Selector

Model

CST1

CST2

CST3

CST4

CST5

CST6

Reference

75 771501

75 771502

75 771503

75 771504

75 771505

75 771506

CSIK 85 731506

Guard short code*

STG1

STG2

STG3

STG4

STG5

STG6

Interlinking kit

Rating

60 Watts

120 Watts

180 Watts

240 Watts

300 Watts

360 Watts

Diameter A

52mm

52mm

52mm

52mm

52mm

52mm

+44 (0) 1733 456789 www.creda-heating.co.uk

Length B

410mm

670mm

980mm

1,280mm

1,590mm

1,890mm

Depth C

75mm

75mm

75mm

75mm

75mm

75mm

39

Sunfan

High level fan heater

Commercial space heating

“

Sunfan is a robust 3kW high volume air throughput commercial/industrial wall mounted fan heater designed to provide highly efficient heating in winter, or cool air circulation in summer.

”

• High air volume throughput of 300m 3 /hour

Key features

• Quiet running, totally enclosed motor

• Wall mounted with 2 part self supporting bracket

• Multi-directional adjustment of 45° vertically and 150° horizontally with single screw locking

• High level heating/cooling - ideal for shops and warehouses where wall space is at a premium

• Double insulated

• Supplied complete with variable thermostatic controller

Thermostatic controller (included)

For remote switching on/off and variable thermostatic control.

Control options

For remote switching on/off and hot/cold air circulation.

Dual control switch (optional)

Ref: 82 815906

Technical Specification

• Flame retardant polycarbonate/glass filled nylon body

• Single phase, 4 pole motor

• Two tone grey (neutral colours)

• Protection - Two thermal cut-outs

• Supply - 230/240V AC single phase

Dimensions

• Minimum mounting height 1.8 metres

• 150mm minimum clearance above the heater

• 300mm minimum clearance on either side

40

Product Selector

Model

CSF3

Reference

75 771401

CDCS 82 815906

Rating

3kW

Dual control switch

Noise level @3m

40.5dBA

Height A

229mm

+44 (0) 1733 456789 www.creda-heating.co.uk

Width B

267mm

Depth C

260mm

Sunscreen

Warm air curtains

Commercial space heating

“

Sunscreen and Sunspot heaters provide the ideal solution for draught exclusion on external doors.

When mounted on the inside of an

” external door they create a ‘hot air curtain’ to prevent cold draughts entering a building. In summer they can be switched to fan only to form a barrier against incoming dust and provide a refreshing breeze. Suitable for a range of doorway applications in commercial premises such as shops, offices, workshops and stores, the Sunscreen and Sunspot heaters are designed for fast installation with key hole-slots for vertical mounting or brackets providing complete flexibility of adjustment from vertical to horizontal.

Easily accessible switches allow the option to run the unit on fan only or at half or full heat output.

Sunspot 2.25kW

The Sunspot is a modular unit almost half the width of the Sunscreen.

It can be used with a Sunscreen for wider doorways or on its own as a high level wall-mounted fan heater in commercial premises.

Key features

• Two heat settings or cold

• High volume throughput

• Smooth running, shaded pole motor, with

‘greased-for-life’ bearings

• Integral switching for ease of installation

• Tangential blower

Technical Specification

• Element - open coil supported by ceramic insulators

• Zinc coated steel, powder coated body white/grey

• Shaded pole motor

• Protection - thermal safety cut-out

• Supply - 230/240V AC single phase

Dimensions

Wall Mount Ceiling Mount

• Can be fixed directly to the wall using the key slot holes provided or angled using the brackets provided

• Mounting directly above the door at a height of between 1.8 and 2.25m

Product Selector

Model

CSS3

CSS45

CSS225

Reference

50 813976

50 813977

50 813975

Rating

3kW

4.5kW

2.25kW

Height A

185mm

185mm

185mm

+44 (0) 1733 456789 www.creda-heating.co.uk

Width B

610mm

610mm

350mm

Depth C

105mm

105mm

105mm

41

Creda Heating

Cable and connection points

Eco-Response

Intelligent heating technology

Contour100

Electronic panel heaters

TPRIII E

Electronic pilot plus panels

TPRIII M / NC Mechanical thermostatic panel heaters

4 core cable (pilot wire capability).

Newera Style

Panel heaters

4 core cable (pilot wire capability).

Newera Electronic and

Newera Plus Panel heaters

RF Electronic Radio frequency controlled panels

3 core cable (pilot wire capability).

SFHA Sensair Automatic

Electric storage fan heaters

3 core cable (pilot wire capability).

TSR Supaslim Combi

Storage fan heaters

TSR Sensair Plus

Electric storage heaters

TSR Slimline

Electric storage heaters

TSF Turbo

Commercial storage fan heaters

42 +44 (0) 1733 456789 www.creda-heating.co.uk

Creda Heating

Cable and connection points

Outline

Thermostatic towel rails

Right hand connection only

(Cannot be left hand connection mounted).

3 core cable

(pilot wire capability).

Proline II PL Fast response electric ladder towel rails

TD Traditional style electric towel rails

LRC

Curved electric towel rails

Straight rail models may be left hand or right hand connection mounted. Curved rail models cannot be left hand connection mounted.

Solarail

Electric towel rails

May be left hand or right hand connection mounted.

Compact Downflow

Fan heater

Right hand connection only

(Cannot be left hand connection mounted).

Plinth

Electric base unit fan heaters

PH2

May be left hand or right hand connection mounted.

Sunplus

Outdoor patio heater

Sunquartz Radiant heaters

Ceramic Emitter Heaters

Sunslim Radiant heaters

Suntube Tubular heaters

May be left hand or right hand connection mounted.

May be left hand or right hand connection mounted.

Sunfan

High level fan heater

Sunscreen

Warm air curtains

May be left hand or right hand connection mounted.

+44 (0) 1733 456789 www.creda-heating.co.uk

43

Sizing Guide

Storage and panel heaters

To use these tables, select the type of heater and the appropriate sizing guide table. Then read across from the nearest floor area and appropriate external wall length to where the columns intersect.

There are two temperature options given in each table:

• Comfort - approximately 21°C for living areas

• Background - approximately 18°C, typically required in bedrooms

Choose either comfort or background heating for the suggested heater size.

These tables are based on conventionally constructed single or two storey dwellings within:

• Ceiling heights of 2.5m (8ft)

• Roof insulation of 25mm (1in) thick

• Brick cavity walls with no insulation

• An external temperature of -1°C

Technical Specification

Tables for storage and storage fan heaters also assume the use of 7 hour economy tariff electricity.

Please check your tariff and metering requirements with either your electricity supplier or call the Creda

Technical Centre on 08709 000430.

Product Selector

Floor Temperature

Area m 2 Options

18m 2

Up to

21m 2

Up to

24m 2

Up to

27m 2

Up to

30m 2

Up to

3m 2

Up to

6m 2

Up to

9m 2

Up to

12m 2

Up to

15 m 2

Up to

Comfort

Background

Comfort

Background

Comfort

Background

Comfort

Background

Comfort

Background

Comfort

Background

Comfort

Background

Comfort

Background

Comfort

Background

Comfort

Background

1.5m

2m

L

M

MS

L

2M

L

S

L

M

L

M

L

M

S/XS S

S/XS S/XS

S

S

M

S

S

S

M

M

S

M

M

L

M

L

M

L

M

MS

L

MS

L

2M

L

3m

M

L

M

L

M

MS

L

S

S

M

S

M

M

L

MS

L

2M

L

2M

MS

4m 5m

M

S

M

S

L

M

L

M

L

M

MS

M L

MS MS

L L

MS 2M

L L

M

S

L

M

L

M

L

2M 2M

L MS

2M 2M

MS MS

LM LM

MS MS

6m

L

MS

L

2M

L

2M

MS

M

M

L

M

L

M

MS

2M

MS

LM

MS

2L

2M

7m

L

2M

L

2M

MS

2M

MS

L

M

L

M

MS

LM

MS

LM

MS

2L

2M

Total Length of Outside Wall (m)

8m 9m 10m 11m 12m 13m 14m 15m 16m 17m 18m 19m 20m

L

2M

MS

2M

MS

LM

MS

L

M

MS

L

MS

LM

MS

2L

2M

2L

2M

2L

2M

2L

2M

2L

2M

SM

L

2M

L

2M

MS

LM

MS

LM

MS

2M

L

2M

MS

LM

MS

LM

MS

2L

2M

2L

2M

2L

2M

2M

MS

LM

2M

2L

2M

2L

2M

2L

2M

2L

LM

LM

MS

2L

2M

2L

2M

2L

2M

3M

LM

3M

LM

2L

LM

2L

2M

3M

2M

3M

LM

3M

LM

3M

2M

3M

LM

3M

ML

3M

2L

3M

LM

3M

LM

2L+S

2L

2L+S

LM

2L+S

2L

2L+S

2L

2L+S 2L+S 2L+M 2L+M

2L 2L 2L 2L

2L+S 2L+S 2L+S 2L+S 2L+M 2L+M 2L+M 2L+M

2M LM LM 2L 2L 2L 2L 2L

3L

3M

3L

3M

3L

3M

12m 2

Up to

15m 2

Up to

18m 2

Up to

21m 2

Up to

3m 2

Up to

6m 2

Up to

9m 2

Up to

Up to

24m 2

Up to

27m 2

Up to

30m 2

Comfort

Background

Comfort

Background

Comfort

Background

Comfort

Background

Comfort

Background

Comfort

Background

Comfort

Background

Comfort

Background

Comfort

Background

Comfort

Background

18

24

18

24

18

24

18

18

18

18

18

18

18

18

18

24

18

24

18

24

18

18

18

18

18

18

18

18

18

18

18

18

18

18

24

18

24

18

24

18

18

18

18

24

18

24

18

24

18

18

18

24

18

24

18

24

18

18+S

24

18+S 18+S

18

18

24

18

24

18

24

18

24 24 18+S 18+S 18+S

18 18 24 24 24

18+S 18+S 18+S 18+M 18+M 18+M 18+M

24

18+S

24

18+S

24

18+S

24

18+M

24

18+S

24

24

18+S

18+S

18+M 24+M

18+S

18+M 24+M 24+M

18+S

18+S

24+L

18+S

24+M 24+M

18+M

24+L

24+L

18+M

24+L 24+L 24+L

18 24 24 24 24 18+S 18+S 18+S 18+M 18+M 18+M 18+M 24+M

18+S 18+S 18+S 18+S 18+M 18+M 18+M 24+M 24+M 24+L 24+L 24+L 18+2M 18+2M

24 24 24 24 18+S 18+S 18+S 18+M 18+M 18+M 24+M 24+M 24+M 24+M

24

18

24

24

18+S 18+S 18+S 18+M 18+M 24+M 24+M 24+L 24+L 24+L 18+2M 18+2M 24+2M 24+2M 24+2M

24 24 24 18+S 18+S 18+S 18+M 18+M 18+M 24+M 24+M 24+M 24+L 24+L 24+L

18+S 18+S 18+S 18+M 18+M 18+M 24+M 24+M 24+L 24+L 24+L 18+2M 18+2M 18+2M 18+2M 24+2M 24+2M

24 24 24 24 18+S 18+S 18+S 18+M 18+M 18+M 24+M 24+M 24+M 24+L 24+L 24+L 24+L 24+L

18+M 18+M 18+M 24+M 24+M 24+L 24+L 24+L 24+L 18+2M 18+2M 18+2M 18+2M 18+2M 24+2M 24+2M 24+2M 24+2L 24+2L 24+2L

24 24 24 18+S 18+S 18+M 18+M 18+M 18+M 18+M 24+M 24+M 24+L 24+L 24+L 24+L 24+L 18+2M 18+2M 18+2M

Up to

3m 2

Up to

6m 2

Up to

9m 2

Up to

12m 2

Up to

15m 2

Up to

18m 2

Up to

21m 2

Up to

24m 2

Up to

27m 2

Up to

30m 2

Comfort

Background

Comfort

Background

Comfort

Background

Comfort

Background

Comfort

Background

Comfort

Background

Comfort

Background

Comfort

Background

Comfort

Background

Comfort

Background

600

600

600 1000 1000 1250 1250

600 600 1000 1000 1000

600 1000 1000 1250 1250 1500 1500 2000

600 600 1000 1000 1000 1250 1250 1500

1000 1000 1250 1250 1500 1500 2000 2000 2000 2250

1000 1000 1000 1250 1250 1250 1500 1500 2000 2000

1250 1250 1250 1500 1500 2000 2000 2000 2250 2500 2500 2500

1000 1000 1250 1250 1250 1500 1500 1500 2000 2000 2000 2000

1250 1250 1500 1500 2000 2000 2250 2250 2500 2500 2750 3000 3000

1000 1250 1250 1500 1500 1500 2000 2000 2000 2250 2500 2500 2500

1500 1500 2000 2000 2000 2250 2500 2500 2500 2750 3000 3000 3250 3500 3500

1250 1250 1250 1500 1500 1500 2000 2000 2250 2250 2500 2500 2500 2500 2750

1500 2000 2000 2000 2250 2250 2500 2500 2750 3000 3000 3250 3500 3500 4000 4000

1250 1500 1500 1500 2000 2000 2000 2000 2250 2250 2500 2500 2750 2750 3000 3000

2000 2000 2000 2250 2500 2500 2750 2750 3000 3000 3250 3500 3500 4000 4000 4000 4000

1500 1500 2000 2000 2000 2000 2250 2250 2500 2500 2500 2750 2750 3000 3000 3250 3250

2000 2000 2250 2500 2500 2750 3000 3000 3250 3500 3500 4000 4000 4000 4100 4400 4400 4750

1500 1500 2000 2000 2000 2000 2250 2500 2500 2500 2750 2750 3000 3000 3250 3250 3500 3500

2250 2500 2500 2500 2750 3000 3000 3250 3250 3500 3500 4000 4000 4000 4100 4400 4400 4750 4750 5000

2000 2000 2000 2000 2000 2250 2500 2500 2500 2750 2750 3000 3000 3250 3250 3500 3500 4000 4000 4000

Extra Small (XS) = TSR6 = 0.9kW Small (S) = TSR12 = 1.7kW Medium (M) = TSR18 = 2.5kW Large (L) = TSR24 = 3.4kW

44 +44 (0) 1733 456789 www.creda-heating.co.uk

Sizing Guide

Commercial space heaters

Sunslim radiant heaters

When planning a radiant heating installation, refer to Table 1 to select the application and type of environment you wish to heat. Table 2 shows the area that can be heated by a single

Sunslim radiant heater in 3kW and

2kW variants.

Note: Heating areas can be overlapped to achieve the necessary heating index.

0.3

0.1

2.0

2.0

Sunslim - Minimum mounting distances

(met r es)

0.5

Table 1 - Sunslim heating index

Applications

Offices, canteens, waiting rooms, entrance halls, dressing rooms

Shops, meeting halls, recreation rooms, clubs workshops, garages, public buildings

Warehouses, loading bays, hangars

Churches

Heating Index

10-14

12-16

14-18

16-20

18-20

Table 2 - Sunslim heated area

Heating index

10

12

14

16

18

H

4.0

3.6

3.2

3.5

2.8

3kW

L

5.24

4.88

4.51

4.33

4.14

W

5.49

4.94

4.39

4.12

3.84

H

3.3

3.0

2.7

2.5

-

H = mounting height (determined by on-site requirements) L = length of the heated area W = width of the heated area

2kW

L

4.11

3.84

3.57

3.38

-

W

4.53

4.12

3.70

3.43

-

Sunquartz radiant heaters

Use the following procedure when planning a Sunquartz heating installation for buildings having a floor area of up to 500m 2 .

• Make a scaled plan of the area to be heated, noting possible mounting heights and positions

• Determine the overall heating requirements

WxYxK = Total kW loading

1000

Key:

W= Length to be heated in metres

Y = Width to be heated in metres

K = Intensity watts per m 2 , determined from Heating Index Table 1

• Determine the number of Sunquartz heaters by dividing the kW rating of the selected units into the total kW loading from stage 2

Table 1 - Sunquartz heating index

Recommended Applications: Sunquartz -

Heating Index (K)

130 - 170

150 - 170

150 - 200

180 - 220

220 - 240

Shops, meeting halls, recreation rooms, clubs

Offices, canteens, waiting rooms, entrance halls

Workshops, garages, public buildings

Warehouses, loading bays, hangars

Churches

A

30" Min.

C

B

Table 2 - Sunquartz heated area

Model

Sunquartz 1.5kW

Sunquartz 2.0kW

Sunquartz 3.0kW 2 lamp

Sunquartz 3.0kW 3 lamp

Sunquartz 4.0kW

Sunquartz 4.5kW

Sunquartz 6.0kW

Spare tube reference

85 821421

85 822171

85 821421

85 821421

85 822171

85 821421

85 822171

A

1,800

Min mounting distances

B

300

2,500

3,000

3,000

3,000

3,000

4,000

300

500

500

500

500

500

C

300

300

500

500

500

500

500

+44 (0) 1733 456789 www.creda-heating.co.uk

45

Design Request

Application Design Survey Information Sheet

Date Fax back to: 01733 552 882

Completed form to be returned to Applications Design Department, Applied Energy Products Ltd, Morley Way, Peterborough PE2 9JJ

Customer name

Address

Telephone

Fax

Contact

Newbuild Properties

For new-build developments the following are required:

• Scaled plans of the property/building (1:100 minimum)

• Sections and elevations

• Construction details and insulation standards

• Type of space and water heating system required

• Degree of site exposure (severe, normal, sheltered etc)

These may be supplied as hard copy or electronically as DWG, DWF, DXF files

Additional design information required

Solar water heating

All water heating products

Wind turbines

Mechanical heat recovery and ventilation

Heat pumps and cooling

Existing properties

Construction details

Age of build

External wall type

Roof insulation

Floor type

Glazing

Window frames

Property type or

Flat storey type

Usage pattern

Type of heating required

Storage heating

Storage fan heaters

Panel heaters (electronic)

Panel heaters (mechanical)

Sunquartz

Eco Response

(Items marked * will be taken if no information supplied)

Solid

None*

100mm(4”)

Solid*

Single*

Metal

House

Ground*

Domestic*

None

Cavity*

25mm(1”)

150mm(6”)

Timber

Double

Timber*

Bungalow

Intermediate

Commercial

Open

TSR Auto

SFHA Sensair

TSR Manual

TSF Turbo

Downflow fan

Sunscreen

Pilot wire

ER

Filled cavity

50mm(2”)

200mm(8”)

Insulated

Triple

UPVC

Office

Top

Chimney*

Blocked off

TSR Combi

Plinth heater

Fan convector

4 zone control

46

External wall

4m

Window 2.4m x 1.5m

Lounge

Ceiling height 2.4m

Internal walls

3m

Door

External wall

1) Room dimensions including ceiling height

Note: If dimensions are in feet, please indicate clearly

2) Number of external walls

3) Number and size of windows

+44 (0) 1733 456789 www.creda-heating.co.uk

Good practice

Helping you save energy

“

Buildings are responsible for

30% of the country’s carbon

) emissions.

dioxide (CO

2

Most Creda heating appliances come complete with built-in thermostats for energy saving but other energy saving tips can save you money and help protect the environment.

”

1 Turning your thermostat down by just 1 O C could cut your heating bills by up to 10%.

2 Is your water too hot?

Your cylinder thermostat should be set at

60 O C / 140 O C.

3 Close curtains or blinds at dusk to stop heat escaping through the windows.

4 Always turn off the lights when you leave a room.

Or even better, switch to energy saving light bulbs. They save up to ten times their price over their lifetime.

5 Don’t leave electronic items on standby or on charge unnecessarily. Standby can use as much as 60% of the electricity used when it is fully switched on.

6 Use your washing machine, dishwasher and tumbledryer on half-load or economy settings.

7 Only boil the amount of water you need for one cup of tea, rather than half a kettle full.

8 Set the appropriate temperature on your heaters for the room they are in. In a spare room, for example, leave the thermostat on a lower setting.

9 Make sure your hot-water tank is properly insulated. A British Standard lagging jacket only costs £10 and could save £10-£15 per year.

10 Use a lid on saucepans and save energy and money with every meal.

11 Stop your heating bill going through the roof.

Fitting 250mm of loft insulation can save £100.

12 Nearly 25% of heat loss can occur through poorly insulated frames and single glazing. If you can’t afford to double glaze all your windows, go for the room you heat the most.

13 Defrost fridges and freezers regularly to keep them running efficiently and ensure the elements to the rear are off the wall so they can work efficiently.

Don’t leave the door open longer than necessary.

Don't put hot or warm food straight into the fridge - let it cool down first.

14 Use Creda heaters fitted with timers to turn the heating on only when you need it and automatically switch it off when you don’t.

Creda products used in conjunction with control options should be put in setback mode to save energy.

15 Use a shower if you have one - save time, money and water. Visit www.redring.co.uk.

16 A dripping hot water tap wastes energy and in one week wastes enough hot water to fill half a bath.

17 Hot water solar thermal collectors are becoming very popular for free hot water.

Visit www.redring.co.uk.

18 Generate your own electricity. A modern micro wind-turbine is the windmill of the 21st century.

Visit www.xpelair.co.uk.

Energy efficiency tips in the workplace

Many of the items listed above will be relevant to the workplace but there are certain areas which need specific attention:

1 Fit PIR sensors to lighting so it only comes on when people are in the area. And make the most of natural light - it's free and won’t damage the environment.

2 Have an energy efficiency champion in each department who makes sure printers and photocopies are all turned off at night and at weekends you’ll be amazed at the savings made.

3 Make sure staff switch their monitors off at weekends and during holidays.

On average, offices waste £6,000 each year by leaving equipment on over weekends and bank holidays.

4 If you have a working environment that entails keeping draughty doors open all the time, or sees regular opening and closing of doors, invest in a Creda air curtain which works like an invisible barrier and keeps draughty cold air out and warm air in.

Renewable energy

The best way to save energy is to use renewable energy, derived from inexhaustible sources such as the wind and sun, which can provide an economical and sustainable heating solution.

+44 (0) 1733 456789 www.creda-heating.co.uk

47

UK Sales

Sales Hotline: 08709 000420

Sales Fax: 08709 000520

Technical Services

Techline: 08709 000430

Techfax: 08709 000530

Brochure Hotline

International Sales

Creda is a great British brand in every sense of the word.

It is also a world leader in space heating with sales in over twenty countries world-wide. We have achieved this by taking into consideration global market requirements and ensuring products are developed to meet these needs, as well as developing products for specific countries and regions, taking into consideration approvals, electrical supply and climate. For further details call:

Sales Hotline: +44 (0) 1733 456789

Sales Fax: +44 (0) 1733 456727

Waste Electrical and Electronic

Equipment Directive

Applied Energy Products Ltd and its associated brands can confirm that all our responsibilities under the Waste Electrical and Electronic Equipment Directive will be fulfilled in accordance with the law. As required within its provisions we are members of an accredited WEEE recycling scheme for all product categories within the scope of the directive.

WEEE product registration number: WEE/EE0202VV.

Factory inspection is an important element of the BEAB

Approved product scheme. Inspections are carried out annually, at each factory where BEAB Approved products are manufactured. Applied Energy Products Limited is a BEAB approved factory.

The BEAB Approved Mark is the electrical safety mark of the

UK's leading independent approvals specialists. It confirms to all in the supply chain that all products displaying the mark have been evaluated to the highest European and International safety standards.

All Creda Heating products are CE marked to certify that the product fulfills the requirements of all relevant European product directives.

Applied Energy Products Ltd

Morley Way

Peterborough

UK

PE2 9JJ t +44 (0) 1733 456789 f +44 (0) 1733 310606 www.applied-energy.com

[email protected]

www.creda-heating.co.uk

C019 August 08

All Creda Heating products, unless otherwise stated, are covered by a full parts and labour guarantee for 1 year from the date of purchase, so should the product become faulty within the guarantee period, it will be replaced with a new product or repaired by our service engineers, totally free of charge.

Applied Energy Products reserve the right to alter product specification or appearance without prior notice. All finishes in the brochure are as accurate as printing processes allow.