SMAX Technology SIU7117 Quick Installation Manual

Add to my manuals
8 Pages

advertisement

SMAX Technology SIU7117 Quick Installation Manual | Manualzz

3M IP Camera Bullet

Quick Installation Guide

Thank you for purchasing this product!

Before you use this product, please check the package contents. If any item is missing, contact your dealer of purchase to claim for missing item(s).

Package Contents

No. Description

1 Network IP Camera

2 DC power adapter

3 Sun Shield

4 Screw

5 Bracket

6 User manual CDROM

7 Quick installation guide

1

2

1

1

1

Q’ty

1

1

Familiar with the IP Camera

[DI/DO Pin assignment]

No. Description

- : RS485-

1

+ : RS485+

1 : DO

2 : GND

3 : DI

2 DC12Volt/2A input

3 Reset Button

4 Audio output

5 Audio input

6

Network, RJ45 connector (support POE 802.3af)

2 LED indicator, orange: power, green: network

7 TV output, BNC connector

※ Please check the I/O cable attached index before insert or release any wire.

1

[Front site]

No. Description

1

2

IR-LED: Used for illumination assistance under night mode

Day/night sensor: Used for day/night detection and IR-LED

ON/OFF control

3 Lens: Fixed focal length.

Hardware verification

1.

Connect Ethernet cable to LAN port.

2.

Connect DC power cable to IP Camera’s DC power connector.

3.

Plug DC power adapter to power outlet on the wall.

If everything’s ok, you should see the left LED light on LAN port light up. If not, please recheck every step and try again, or ask your dealer of purchase for help.

2

Disassembly the case to insert SD card

1.

Hereunder shows the sequence of bullet case disassembly.

2.

It is recommended that release the case with a hexagonal socket, such as the socket spanner ① pictured above. Attach the socket spanner to the cable gland ②, and twist anti-clockwise to loosen it. Pull out the Insert ③, and then unscrew the Rear cover ④ to locate the Micro SD Card Slot.

3

3.

Please note the front side of the cable, which is covered with heat shrink tube, should be inserted in to the PVC tube cap completely . It is very important for weatherproof function working properly.

Accessories’ assembly

1.

Find the screws in the package, use screwdriver to fix the sun shield on the device’s main body.

2.

Secure the wall mounting metal bracket on the wall then secure the bullet camera on the bracket.

4

Search the camera on the network

This camera offers web UI management interface. Currently the viewing system required as below:

˙OS: Microsoft Windows XP / Vista / Win7 / Win8

˙Browser: IE8 / IE9 / IE10

˙Cell phone: 3GPP player

˙Quick Time: 7.0 or above

1.

Make sure all IP cameras are powered on and connect to local network first.

2.

Using the utility ‘IPFinder.exe’ on the CD-ROM, the IP camera can be searched without knowing the IP address:

3.

Press ‘

Discover’

button to search for all IP cameras on the local network. If the IP camera was not resided in the same sub-network of the managed PC, click ‘Change IP’ to assign an

IP address of the same subnet of the PC. Then the IP camera can be accessed by clicking ‘ Link’ button through web browser.

4.

Click ‘Exit’ button to close IPFinder .

5

Access camera’s Web UI and Install ActiveX Plugin

1.

This IP camera is a DHCP client. It can get IP address from

DHCP server automatically.

2.

The default IP address is 192.168.1.99. Use

IPFinder

to search the camera and assign an IP address resided in the same sub-network of the managed computer.

3.

Select the IP camera from IPFinder ’s list and click ‘Link’ to access the device. The user login screen will appear when camera is connected.

4.

Both user name and password are ‘admin’ .

5.

If the IP camera is accessed for the first time, the following message will pop up:

This message prompts that ActiveX plugin installation is needed before getting the video from IP camera.

For IE 9 or above version, the notification will be displayed at the bottom of Internet Explorer:

6

6.

If the window pop up this ‘Windows Firewall has blocked some features of this program’

Click ‘Allow access’ , otherwise the UI image will not be able to function properly.

7.

When Internet Explorer plugin is installed, you may also be prompted that ‘Do you want to allow changes to be made to your computer?’ :

Click ‘Yes’ to allow changes.

8.

After ActiveX plugin is installed, the video stream from camera can be seen. Please refer to user manual for more detailed instructions.

P/N: 5300-00000024-00Y

7

advertisement

Was this manual useful for you? Yes No
Thank you for your participation!

* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project

Related manuals

Download PDF

advertisement