Model Number
18207
Operating Instructions
& Parts Manual
Air Actuated Hydraulic
Bottle Jack w/Wheels
Capacity
20 Ton
SFA Companies © 2003
10939 N. Pomona Avenue
Kansas City, MO 64153
OIPM #18207-ABJ3
Printed in Taiwan
Save these instructions. For your safety, read and understand the information contained within. The owner and operator shall have an understanding of this product and safe operating procedures before attempting to use this product. Instructions and Safety information shall be conveyed in the operators native language before use of this product is authorized. Make certain that the operator thoroughly understands the inherent dangers associated with the use and misuse of the product. If any doubt exists as to the safe and proper use of this product as outlined in this factory authorized manual, remove from service until which time it is clear. Inspect before each use. Do not use if broken, bent, cracked or otherwise damaged parts are noted. If the jack has been or suspected to have been subjected to a shock load (a load dropped suddenly, unexpectedly upon it), discontinue use until checked out by an authorized factory service center. Owners and operators of this equipment shall be aware that the use and subsequent repair of this equipment may require special training and knowledge. It is recommended that an annual inspection be done by qualified personnel and that any missing or damaged parts, decals, warning / safety labels or signs be replaced with factory authorized replacement parts only. Any jack that appears to be damaged in any way, is worn or operates abnormally shall be removed from service immediately until such time as repairs can be made.
PRODUCT DESCRIPTION
Omega Air Actuated Hydraulic Bottle Jack with wheels is designed for lifting , but not sustaining, loads ranging up to
20 tons. After lifting, loads must be immediately supported by appropriate means. It is suitable for use in an appropriately rated and designed vertical or bench press structure. This jack is not recommended for use in lifting or positioning houses and/or other building structures. This jack complies with applicable ASME / ANSI - PALD
Standards. For air actuated use, ensure that your air source can dedicate 7.8 CFM @ 90 - 175PSI to each jack operated. To ensure dependable, troublefree operation an air dryer and oiler is recommended.
SPECIFICATIONS
Model Capacity
18207 20 Ton
Base Size (L x W)
6 7/8" X 4 7/8"
Min. Height
9 3/4"
Max. Height
18 3/4"
BEFORE USE
1. Verify that the product and the application are compatible, if in doubt call Omega Technical
Service (888)332-6419.
2. Before using this product, read the operator's manual completely and familiarize yourself thoroughly with the product and the hazards associated with its improper use.
3. With the provided handle, open the release valve
(counter-clockwise no more than 2 full turns).
4. With ram fully retracted, locate and remove the oil filler screw. This will help release any pressurized air which may be trapped within the reservoir.
Ensure the oil level is just below the oil filler screw hole. Re-install the oil filler screw.
5. Pour a teaspoon of good quality, air tool lubricant into the air supply inlet of the lift control valve. (See
Illustration) Connect to air supply and operate for 3 seconds to evenly distribute lubricant.
6. Check to ensure that jack rolls freely and that the pump operates smoothly before putting into service.
Replace worn or damaged parts and assemblies with Omega Authorized Replacement Parts only.
7. This product is fitted to accept the popular 1/4" PT air nipple. When installing 1/4" PT nipple of your choice, ensure that thread tape or compound is used when servicing connections.
8. Inspect before each use. Do not use if bent, broken or cracked components are noted.
2
extension screw saddle handle air hose return spring lift control valve air motor positioner receptacle oil filler screw wheel release valve
Figure 1 - Model 18207 Nomenclature
OPERATION
Lifting (refer to Figure 1)
1. Assemble 3 pc. handle, ensure that each spring clip aligns with and is secure in the corresponding handle slot.
2. Chock the load to prevent inadvertent shifting and movement.
3. Insert the handle into the positioner receptacle, tilt jack and wheel it into position near the lift point.
4. With slotted end of handle, close the release valve by turning it clockwise until the threaded valve offers firm resistance to further tightening.
! SAFETY MESSAGE !
Use only the handle provided with this product or an authorized replacement to ensure proper release valve operation. Do not use an extender on the air hose nor the operating handle. When using to lift vehicle, lift only on the manufacturer’s recommended lift points and in accordance with the published guidelines in your vehicle owners manual.
5. Insert and secure handle into positioner receptacle.
Squeeze the lift control valve until saddle contacts load. To end air operation, simply release the grip on the lift control valve. Never wire, clamp or otherwise disable the the lift control valve to function by any means other than by using the operator's hand.
6. Raise load to desired height, then immediately transfer the load to appropriately rated support devices such as jack stands.
!
WARNING
!
WARNING
Study, understand, and follow all instructions provided with and on this device. Do not exceed rated capacity. This is a lifting device only. After lifting, immediately transfer the load to appropriately rated vehicle stands. Never work on, under, or around a load supported by this device. Use only on hard, level surfaces capable of sustaining rated capacity loads. Do not move or dolly loads with this device. Do not modify this device. Failure to heed these markings may result in personal injury and/or property damage.
To avoid crushing and related injuries:
NEVER work on, under or around a load supported only by a jack. ALWAYS use adequately rated jack stands.
3
Lowering
1. Raise load enough to carefully remove jack stands.
2. Insert handle onto release valve and slowly turn handle counter-clockwise, but no more than 2 full turns. If load fails to lower, carefully transfer the load to another lifting device and jack stands. Carefully remove affected jack, and then the jack stands.
Lower the load, again by slowly turning the release valve no more than 2 full turns.
! SAFETY MESSAGE !
Be sure all tools and personnel are clear before lowering load. No alterations shall be made to this device. Only attachments and/or adapters supplied by the manufacturer shall be used.
3. After removing jack from under the load, ensure ram lowers completely to reduce exposure to rust and contamination.
MAINTENANCE
Important : Use only a good grade hydraulic jack oil.
Avoid mixing different types of fluid and NEVER use brake fluid, turbine oil, transmission fluid, motor oil or glycerin. Improper fluid can cause premature failure of the jack and the potential for sudden and immediate loss of load. We recommend Mobil DTE 13M or equivalent.
Adding oil
1. With saddle fully lowered and release valve open, set jack in its upright, level position. Remove oil filler screw.
2. Fill until oil is level with the filler screw hole, re-install oil filler screw.
Changing oil
For best performance and longest life, replace the complete fluid supply at least once per year.
1. With saddle fully lowered and release valve open, remove the oil filler screw.
2. Lay the jack on its side and drain the fluid into a suitable container.
Note: Dispose of hydraulic fluid in accordance with local regulations.
3. Fill with good quality jack oil. Reinstall oil filler screw.
Lubrication
1. A coating of light lubricating oil to axles and saddle screw extension will help to prevent rust.
2. Periodically check the ram for signs of rust or corrosion. Clean as needed and wipe with an oily cloth.
Never use sandpaper or abrasive material on ram surface!
3. When not in use, store the jack with ram fully retracted and air disconnected.
4
TROUBLESHOOTING
Symptom Possible Causes Corrective Action
Jack will not lift load
Jack will lift, but not maintain
pressure
Jack will not lower after unloading
Poor lift performance
• Release valve not tightly closed
• Overload condition
• Air supply inadequate
• Release valve not tightly closed
• Overload condition
• Hydraulic unit malfunction
• Reservoir overfilled
• Ensure release valve tightly closed
• Remedy overload condition
• Ensure adequate air supply
• Ensure release valve tightly closed
• Remedy overload condition
• Contact Omega Tech. Service
• Ensure load is removed, then drain fluid
to proper level
• Fluid level low
• Air trapped in system
• Ensure proper fluid level
• With ram fully retracted, remove oil filler
screw/plug to let pressurized air escape,
then reinstall oil filler screw/plug
Will not lift to full extension • Fluid level low • Ensure proper fluid level
ONE YEAR LIMITED WARRANTY
For a period of one (1) year from date of purchase, SFA Companies will repair or replace, at its option, without charge, any of its products which fails due to a defect in material or workmanship, or which fails to conform to any implied warranty not excluded hereby.
Performance of any obligation under this warranty may be obtained by returning the warranted product, freight prepaid, to SFA Companies Warranty Service Department, 10939 N. Pomona Ave., Kansas City, MO 64153.
Except where such limitations and exclusions are specifically prohibited by applicable law, (1) The
CONSUMER'S SOLE AND EXCLUSIVE REMEDY SHALL BE THE REPAIR OR REPLACEMENT OF DEFECTIVE
PRODUCTS AS DESCRIBED ABOVE, and (2) SFA Companies SHALL NOT BE LIABLE FOR ANY
CONSEQUENTIAL OR INCIDENTAL DAMAGE OR LOSS WHATSOEVER, and (3) THE DURATION OF ANY AND
ALL EXPRESSED AND IMPLIED WARRANTIES, INCLUDING WITHOUT LIMITATION, ANY WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, IS LIMITED TO A PERIOD OF ONE (1) YEAR
FROM DATE OF PURCHASE.
Some states do not allow limitations on how long an implied warranty lasts, so the above limitation may not apply to you. Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may not apply to you. This warranty gives you specific legal rights, and you may also have other rights which vary from state to state.
5
