FSR TB-CHRG Installation Instructions

Add to my manuals
2 Pages

advertisement

FSR TB-CHRG Installation Instructions | Manualzz

FSR

TB-CHRG Installation Instructions

244 Bergen Boulevard, Woodland Park, NJ 07424, Phone: 973.785.4347 - Fax: 973.785.4207

3/8 MIN - 5/8 MAX R.

1. DETERMINE LOCATION AND CUT 6-1/16 x 5-3/16 HOLE

WITH 3/8 MIN - 5/8 MAX RADIUS CORNERS IN TABLE TOP.

PANEL

DIRECTION

2. INSTALL MOUNTING BRACKETS TO ASSEMBLY AND SECURE

TO TABLE BY SCREWING MOUNTING SCREWS TO UNDERSIDE

OF TABLE.

TB-CHRG ASSEMBLY

MOUNTING BRACKET

AND MOUNTING

SCREW INSTALLED

6-1/16

(2) MOUNTING

BRACKET

CUSTOMER TO PROVIDE

KO SLUG/PENNY/OTHER

HARD FLAT PIECE FOR

SCREW END, WITH SOFT

TABLE WOOD

MOUNTING BRACKET

AND MOUNTING SCREW

(SEE BELOW)

43096

5 MOUNTING BRACKET

POSITIONS TO ACCOMMODATE

VARIOUS TABLE THICKNESSES

(2) MOUNTING

SCREW

LIT1564

BEFORE TIGHTENING CABLE TIES, DO THE FOLLOWING:

1. Ensure loop for the A/C cord does not

touch any edge when in the open

position.

2. Test cycle the unit to ensure AC cord

make contact with any edges or

components inside the box.

Shown with lid closed.

Shown with lid opened.

advertisement

Was this manual useful for you? Yes No
Thank you for your participation!

* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project

Related manuals

Download PDF

advertisement