6 CORPORATE PARKWAY
GOOSE CREEK SC 29445
.
.
Quoizel, Inc.
6 Corporate Parkway
Goose Creek, SC
29445
Customer Service
Phone 631.273.2700
Fax 631.231.7102
www.quoizel.com
Assembly Instruction Sheet #IS-BRN8408IB
For Style BRN8408IB
Tools Required: Flathead screwdriver, Phillips screwdriver, pliers, wire cutters, wire strippers, electrical tape, safety glasses.
Bulb Recommended: (1) Edson Bulb 60W Maximum
Estimated Assembly Time: 20-30 minutes
Preparation: Identify and inspect all parts before beginning installation. Check package content list and diagrams below to be sure all parts are present. If any parts are missing or damaged, do not attempt to assemble, install, or operate the fixture. Contact customer service for replacement parts.
Warnings and Cautions
Turn off electricity at circuit breaker or main fuse box before installation. Consult a licensed electrician if in doubt.
These instructions are provided for your safety. It is very important you read them completely before installing the fixture. We strongly recommend that a licensed, professional electrician perform the installation.
Disconnect fixture from power source before replacing bulbs. Make sure bulbs are given sufficient time to cool before removal. Do not subject glass parts to any shock while in operation or shattering may result.
Package Contents
Part
A
B
C
D
Description
Inner Backplate
Mounting Screw
Fixture Body
Edson Bulb
Quantity
1 pc.
2 pcs.
1 pc.
1 pc.
A
C
B
D
Thank you for purchasing a Quoizel product.
Need assistance with parts or assembly? Call Quoizel customer service at 1-631-273-2700 or visit us on-line at www.quoizel.com
2012 QuoizelInc.
October2012
1of5
BRN8408IB
FINISH: IMPERIAL BRONZE
2
6.5”
7”
8”
6.5”
14.5”
9”
4
3
1
5.5”
8”
(1)60W Edson Bulb
(Supplied)
3
4
1
2
NO.
PART NUMBER
G3405PA
1 8408IBBRN
G3403PA
G3404PA
NOTE: ALL DIMENSIONS ARE ROUNDED UP TO THE NEAREST 1/2 "
REPLACEMENT PART DESCRIPTION
BACK CLEAR BEVELED GLASS PANEL
BASE IMPERIAL BRONZE
FRONT CLEAR BEVELED GLASS PANEL
SIDE CLEAR BEVELED GLASS PANEL
2of5
REQ.
1
1
1
2
6 CORPORATE PARKWAY
GOOSE CREEK SC 29445
.
.
Assembly Instruction Sheet #IS-BRN8408IB
For Style BRN8408IB
STEP 1
-
Attach Inner Backplate to Outlet
Box
A. Attach the Inner Backplate (A) to Outlet Box and secure by threading Outlet Box Screws (not supplied) into the
Mounting Holes on the Outlet Box. Tighten until snug.
Outlet Box
Mounting Hole
Outlet Box
Screw
Inner Backplate
Figure 1
STEP 2
-
Make Wire Connections
A. Use standard wire connectors to make all wire connections. (Connectors are not included with fixture.)
Strip and prepare wire ends according to instructions supplied with connectors.
B. Connect White Supply Wire from the Outlet Box to White
Wire from fixture.
C. Connect Black (or Red) Supply Wire from the Outlet Box to Black Wire from fixture.
D. Connect Ground Wire from the Outlet Box to Ground
Wire from fixture.
E. Twist connectors until wires are tightly joined together.
F. Wrap each connection with approved electrical tape and carefully stuff all the connected wires into the Outlet Box.
White wire from supply
Black wire from supply
(or Red)
Ground wire from supply
White wire from fixture
Black wire from fixture
Ground wire from fixture
Figure 3
Figure 2
Thank you for purchasing a Quoizel product.
Need assistance with parts or assembly? Call Quoizel customer service at 1-631-273-2700 or visit us on-line at www.quoizel.com
2012 QuoizelInc.
October2012
3of5
6 CORPORATE PARKWAY
GOOSE CREEK SC 29445
.
.
Assembly Instruction Sheet #IS-BRN8408IB
For Style BRN8408IB
STEP 3
-
Attach Fixture Body to Inner
Backplate
A. Place the backplate of the Fixture Body (C) onto the
Inner Backplate (A). Line up holes on both of them.
Thread Mounting Screws (B) into the mounting holes on the Inner Backplate (A) and hand tighten until snug to secure them.
Mounting
Hole
Mounting
Screw
Figure 4
Inner
Backplate
Backplate
STEP 4
-
Install Bulb
A. This fixture uses Edson bulbs with a standard screw base. Maximum 60 watts.
B. Insert bulb and screw snugly into place.
Socket
Bulb
Figure 5
Thank you for purchasing a Quoizel product.
Need assistance with parts or assembly? Call Quoizel customer service at 1-631-273-2700 or visit us on-line at www.quoizel.com
2012 QuoizelInc.
October2012
4of5
6 CORPORATE PARKWAY
GOOSE CREEK SC 29445
.
.
Assembly Instruction Sheet #IS-BRN8408IB
For Style BRN8408IB
STEP 5
-
Apply Silicone Sealer to Mounting
Screws
A. To prevent moisture from entering the wire compartment, apply a small amount of silicone sealer
(not included) to the threaded side of the mounting
Screws (B) and then install them onto the mounting
Hole on the side of inner Backplate (A). Wipe off excess caulk.
Mounting
Screw
Figure 6
STEP 6
-
Apply Silicone Sealer to Backplate
A. Make sure exterior wall surface and fixture backplate are free of dirt before applying caulk. Using exterior grade caulk, start on one side of fixture backplate and follow contour, where the fixture backplate meets the exterior wall surface upward. Proceed to caulk over top of backplate and down other side. Do not caulk bottom of fixture backplate to ensure proper moisture drainage.
Your fixture is now assembled and ready to use.
Enjoy!
Outdoor
Fixture
Backplate
Exterior Wall
Surface
Figure 7
Exterior
Grade Caulk
Thank you for purchasing a Quoizel product.
Need assistance with parts or assembly? Call Quoizel customer service at 1-631-273-2700 or visit us on-line at www.quoizel.com
2012 QuoizelInc.
October2012
5of5
