Quoizel SDN8408IB Steadman Outdoor Lantern Installation Guide

Quoizel SDN8405IB is a stylish and functional outdoor light fixture that is perfect for illuminating your home's exterior. With its 60W maximum Edson bulb, this fixture provides ample lighting for your porch, patio, or deck. The fixture is easy to install and comes with all the necessary hardware. The SDN8405IB is also weather-resistant, so you can be sure that it will withstand the elements. Here are some of the features and benefits of the Quoizel SDN8405IB:

60W maximum Edson bulb provides ample lighting
Weather-resistant construction for durability
Easy to install with all necessary hardware included

PDF Download

Document

6 CORPORATE PARKWAY

GOOSE CREEK SC 29445

Quoizel, Inc.

6 Corporate Parkway

Goose Creek, SC

29445

Customer Service

Phone 631.273.2700

Fax 631.231.7102

www.quoizel.com

Assembly Instruction Sheet #IS-SDN8408IB

For Style SDN8408IB

Tools Required: Flathead screwdriver, Phillips screwdriver, pliers, wire cutters, wire strippers, electrical tape, safety glasses.

Bulb Recommended: (1) Edson Bulb 60W Maximum

Estimated Assembly Time: 20-30 minutes

Preparation: Identify and inspect all parts before beginning installation. Check package content list and diagrams below to be sure all parts are present. If any parts are missing or damaged, do not attempt to assemble, install, or operate the fixture. Contact customer service for replacement parts.

Warnings and Cautions

Turn off electricity at circuit breaker or main fuse box before installation. Consult a licensed electrician if in doubt.

These instructions are provided for your safety. It is very important you read them completely before installing the fixture. We strongly recommend that a licensed, professional electrician perform the installation.

Disconnect fixture from power source before replacing bulbs. Make sure bulbs are given sufficient time to cool before removal. Do not subject glass parts to any shock while in operation or shattering may result.

Package Contents

Part

Description

Crossbar

Mounting Screw

Lock Washer

Hex Nut

Lock Ball

Fixture Body

Shade

Long Socket Collar

Short Socket Collar

Edson Bulb

Quantity

1 pc.

2 pcs.

1 pc.

Thank you for purchasing a Quoizel product.

Need assistance with parts or assembly? Call Quoizel customer service at 1-631-273-2700 or visit us on-line at www.quoizel.com

2012 QuoizelInc.

October2012

1of6

SDN8408IB

FINISH: IMPERIAL BRONZE

2.4mm

13Ga

GND

QUOIZEL

10”

12”

19.5”

8” Dia.

(1)60W Edson Bulb

(Supplied)

NOTE: ALL DIMENSIONS ARE ROUNDED UP TO THE NEAREST 1/2 "

NO.

PART NUMBER

18408IBSDN

G3393SH

M280KTIB

REPLACEMENT PART DESCRIPTION

BASE IMPERIAL BRONZE

CLEAR SEEDY GLASS

KIT IMPERIAL BRONZE REPLACEMENT

2of6

REQ.

6 CORPORATE PARKWAY

GOOSE CREEK SC 29445

Assembly Instruction Sheet #IS-SDN8408IB

For Style SDN8408IB

STEP 1

Attach Mounting Screws, Lock

Washers and Hex Nuts to Crossbar

A. Line up a set of holes on the Crossbar (A) and Holes on the Backplate of the Fixture Body (F).

B. Thread Mounting Screws (B) into the holes on the

Crossbar (A), pass Lock Washers (C) and thread Hex

Nut (D) onto the Mounting Screws (B). Hand tighten until snug.

Mounting

Screw Lock Washer

Fixture

Body

Crossbar

Hex Nut

Figure 1

Backplate

STEP 2

Attach Crossbar to Outlet Box

A. Attach the Crossbar (A) to Outlet Box and secure by threading Outlet Box Screws (not supplied) into the

Mounting Holes on the Outlet Box. Tighten until snug.

Outlet

Box

Crossbar

Mounting

Hole

Outlet Box

Screw

Figure 2

Thank you for purchasing a Quoizel product.

Need assistance with parts or assembly? Call Quoizel customer service at 1-631-273-2700 or visit us on-line at www.quoizel.com

2012 QuoizelInc.

October2012

3of6

6 CORPORATE PARKWAY

GOOSE CREEK SC 29445

Assembly Instruction Sheet #IS-SDN8408IB

For Style SDN8408IB

STEP 3

Make Wire Connections

A. Use standard wire connectors to make all wire connections. (Connectors are not included with fixture.)

Strip and prepare wire ends according to instructions supplied with connectors.

B. Connect White Supply Wire from the Outlet Box to White

Wire from fixture.

C. Connect Black (or Red) Supply Wire from the Outlet Box to Black Wire from fixture.

D. Connect Ground Wire from the Outlet Box to Ground

Wire from fixture.

E. Twist connectors until wires are tightly joined together.

F. Wrap each connection with approved electrical tape and carefully stuff all the connected wires into the Outlet Box.

Figure 3

White wire from supply White wire from fixture

Black wire from supply

(or Red)

Ground wire from supply

Black wire from fixture

Ground wire from fixture

Figure 4

STEP 4

Attach Fixture Body to Mounting

Screw

A. Place the Backplate of the Fixture Body (F) over the

Mounting Screws (B) and secure with Lock Ball (E).

Hand tighten until snug.

Mounting

Screw

Backplate

Lock Ball

Fixture Body

Figure 5

Thank you for purchasing a Quoizel product.

Need assistance with parts or assembly? Call Quoizel customer service at 1-631-273-2700 or visit us on-line at www.quoizel.com

2012 QuoizelInc.

October2012

4of6

6 CORPORATE PARKWAY

GOOSE CREEK SC 29445

Assembly Instruction Sheet #IS-SDN8408IB

For Style SDN8408IB

STEP 5

Attach Shade to Socket

A. Place the Shade (G) over the Socket. Secure by threading the Long Socket Collar (H) and the Short

Socket Collar (I) onto the Socket. Hand tighten until snug.

Socket

Figure 6

Shade

Long Socket Collar

Short Socket Collar

STEP 6

Install Bulb

This fixture uses Edson bulb with a screw base. Maximum

60 watts.

B. Insert bulb and screw snugly into place.

Bulb

Socket Figure 7

Thank you for purchasing a Quoizel product.

Need assistance with parts or assembly? Call Quoizel customer service at 1-631-273-2700 or visit us on-line at www.quoizel.com

2012 QuoizelInc.

October2012

5of6

6 CORPORATE PARKWAY

GOOSE CREEK SC 29445

Assembly Instruction Sheet #IS-SDN8408IB

For Style SDN8408IB

STEP 7

Apply Silicone Sealer to Mounting

Balls

A. To prevent moisture from entering the wire compartment, apply a small amount of silicone sealer

(not included) to the threaded side of the mounting balls (E) and then install them onto the mounting screws (B). Wipe off excess caulk.

Mounting Ball

STEP 8

Apply Silicone Sealer to Backplate

A. Make sure exterior wall surface and fixture backplate are free of dirt before applying caulk. Using exterior grade caulk, start on one side of fixture backplate and follow contour, where the fixture backplate meets the exterior wall surface upward. Proceed to caulk over top of backplate and down other side. Do not caulk bottom of fixture backplate to ensure proper moisture drainage.

Your fixture is now assembled and ready to use.

Enjoy!

Outdoor

Fixture

Backplate

Exterior Wall Surface

Figure 8

Figure 9

Exterior

Grade Caulk

Thank you for purchasing a Quoizel product.

Need assistance with parts or assembly? Call Quoizel customer service at 1-631-273-2700 or visit us on-line at www.quoizel.com

2012 QuoizelInc.

October2012

6of6

Hello! I am an AI chatbot specifically trained to assist you with the Quoizel SDN8408IB Steadman Outdoor Lantern Installation Guide. I have thoroughly reviewed the document and can help you locate the exact information you need or explain the content in clear and simple terms. Whether you’re looking for guidance on specific features, troubleshooting steps, or general usage, feel free to ask your questions. The more details you provide about your concerns or needs, the more accurately and effectively I can assist you!

Assistant typing

Assistant terminated