Quoizel PCPE8524C Promenade Bath Light Installation Guide
Advertisement
Advertisement
Assembly Instruction Sheet #IS-PCPE8524C
_R1
For Styles PCPE8524C
Please go to www.quoizel.com
for product cleaning tips. Go to the Care + Maintenance selection.
Tools Required: Flathead screwdriver, Phillips screwdriver, pliers, wire cutters, wire strippers, electrical tape, safety glasses.
Light Source: Integrated 8W LED
Estimated Assembly Time: 20-30 minutes
Preparation: Identify and inspect all parts before beginning installation. Check package content list and diagrams below to be sure all parts are present. If any parts are missing or damaged, do not attempt to assemble, install, or operate the fixture. Contact customer service for replacement parts.
Warnings and Cautions
Turn off electricity at circuit breaker or main fuse box before installation. Consult a licensed electrician if in doubt.
These instructions are provided for your safety. It is very important you read them completely before installing the fixture. We strongly recommend that a licensed, professional electrician perform the installation.
Disconnect fixture from power source before replacing bulbs. Make sure bulbs are given sufficient time to cool before removal. Do not subject glass parts to any shock while in operation or shattering may result.
Package Contents
B
Mounting
Screw x 4
C
Fixture
Body x 1
A
Inner
Backplate x 1
STEP 1 Install Inner Backplate and Fixture Body
A. Pass supply wires through Inner Backplate (A). Attach Inner
Backplate (A) to Outlet Box with the head of Green Ground Screw facing you. Secure it with Outlet Box Screws (not included). Tighten until snug .
B. Refer to Step 2 for wiring connections.
C. Attach Fixture Body (C) over Inner Backplate (A) and secure with
Lock Screws (B). Tighten until snug with screwdrivers.
Outlet Box
Screw
A
Outlet
Box
How To Replace Shade
A. By using Phillips screwdriver unscrew Screws from Fixture Body.
Remove Cap and Shade from Fixture Body as shown.
B. Reverse above steps to reinstall replacement Shade onto fixture.
Shade
Cap
Screw
Phillips Screwdriver
PCPE8524C
FINISH: POLISHED CHROME
Figure 3
Fixture Body
1 3”
4.5”
C
7”
24”
Figure 1
B
STEP 2 - Wire Connections
3”
A. Use standard wire connectors (not included) to make all wire connections. Twist connectors until wires are tightly joined together.
Wrap each connection with approved electrical tape and carefully stuff all the connected wires between Inner Backplate (A) and
Fixture Body (C).
NOTE: ALL DIMENSIONS ARE ROUNDED UP TO THE NEAREST 1/4
"
NO.
PART NUMBER REPLACEMENT PART DESCRIPTION QTY.
1 J1180SH SHADE 1
White wire from supply
Black wire from supply (or Red)
Ground wire from supply
White wire from fixture
Black wire from fixture
Ground wire from fixture
Your fixture is now assembled and ready to use. Enjoy!
Figure 2
Thank you for purchasing a Quoizel product.
Need assistance with parts or assembly? Call Quoizel customer service at 1-800-645-3184 or visit us on-line at www.quoizel.com
2016 QuoizelInc.
RevisedDate:2016-06-06
1of1

Public link updated
The public link to your chat has been updated.
Advertisement