Quoizel TRG1508BN Trilogy Mini Pendant Installation Guide
Quoizel TRG1508BN is a versatile lighting fixture that can be used in a variety of settings. With its adjustable height and multiple rod options, it can be customized to fit your specific needs. The fixture comes with a decorative filament bulb that provides a warm and inviting glow. It is also compatible with CFL bulbs, making it an energy-efficient choice. The TRG1508BN is easy to install and comes with all the necessary hardware.
Here are some of the features and benefits of the Quoizel TRG1508BN:
- Adjustable height: The fixture can be adjusted to hang at a height of 46 inches or 58 inches.
Advertisement
Advertisement
6 CORPORATE PARKWAY
GOOSE CREEK SC 29445
.
.
Quoizel, Inc.
6 Corporate Parkway
Goose Creek, SC
29445
Customer Service
Phone 631.273.2700
Fax 631.231.7102
www.quoizel.com
Assembly Instruction Sheet #IS-TRG1508
For Styles TRG1508OZ and TRG1508BN
Please go to www.quoizel.com
selection.
for product cleaning tips. Go to the Care + Maintenance
Tools Required: Flathead screwdriver, Phillips screwdriver, pliers, wire cutters, wire strippers, electrical tape, safety glasses.
Light Source: (1) Medium Base Decorative Filament 60W bulb (provided), Maximum
100W, Alternate bulb (1) 23W CFL Maximum.
Estimated Assembly Time: 20-30 minutes
Preparation: Identify and inspect all parts before beginning installation. Check package content list and diagrams below to be sure all parts are present. If any parts are missing or damaged, do not attempt to assemble, install, or operate the fixture. Contact customer service for replacement parts.
Warnings and Cautions
Turn off electricity at circuit breaker or main fuse box before installation. Consult a licensed electrician if in doubt.
These instructions are provided for your safety. It is very important you read them completely before installing the fixture. We strongly recommend that a licensed, professional electrician perform the installation.
Disconnect fixture from power source before replacing bulbs. Make sure bulbs are given sufficient time to cool before removal. Do not subject glass parts to any shock while in operation or shattering may result.
Package Contents
Part
C
D
A
B
E
F
I
J
G
H
K
L
Description
Crossbar
Mounting Screw
Lock Washer
Hex Nut
Mounting Ball
Ceiling Canopy
6” Rod
12” Rod
Socket Assembly
Shade
Socket Collar
Bulb
Quantity
1 pc.
2 pcs.
2 pcs.
2 pcs.
2 pcs.
1 pc.
2 pcs.
2 pcs.
1 pc.
1 pc.
1 pc.
1 pc.
A
B
C
D
E
F
L
I
J
K
G
H
Thank you for purchasing a Quoizel product.
Need assistance with parts or assembly? Call Quoizel customer service at 1-631-273-2700 or visit us on-line at www.quoizel.com
2015 QuoizelInc.
December2015
1of5
TRG1508OZ/TRG1508BN
FINISH: OLD BRONZE
BRUSHED NICKEL
4
6”
3
12”
2.4mm
13Ga
GND
QUOIZEL
R
5” Dia.
1”
46”
OVERALL HEIGHT INCLUDES
(2) 6” AND 12” RODS
1
5”
7.5”
8” Dia.
2
(1)100W
Medium Base Bulb
(Supplied)
NO.
PART NUMBER
G3642SH 1
2
3
4
I1101EC
9012EXOZ1
9006EXOZ1
3
4
9012EXBN
9006EXBN
NOTE: ALL DIMENSIONS ARE ROUNDED UP TO THE NEAREST 1/4 "
STYLE NUMBER REPLACEMENT PART DESCRIPTION
GLASS
VINTAGE BULB
12” ROD
6” ROD
12” ROD
6” ROD
2of5
REQ.
1
1
2
2
2
2
TRG1508OZ
TRG1508BN
TRG1508OZ
TRG1508BN
6 CORPORATE PARKWAY
GOOSE CREEK SC 29445
.
.
Assembly Instruction Sheet #IS-TRG1508
For Styles TRG1508OZ and TRG1508BN
STEP 1
-
Assemble Rods
A. Determine the Rods (G/H) to be assembled to the Socket
Assembly (I) according to your hanging height.
B. Pass Supply Wires and Ground Wire through the chosen
Rods (G/H) and then thread the chosen Rods (G/H) and the Socket Assembly (I) together. Hand tighten until snug.
Figure 1
6” Rod
6” Rod with
Fixture Loop
12” Rod with
Nipple
12” Rod
Supply Wire and
Ground Wire
Socket
Assembly
STEP 2
-
Assemble Ceiling Canopy to Upper
Rod
A. Pass Supply Wires and Ground Wire through the Ceiling
Canopy (F) and then thread the Ceiling Canopy (F) and the Upper Rod together. Hand tighten until snug.
Ceiling
Canopy
Supply Wire and
Ground Wire
Upper Rod
Figure 2
STEP 3
-
Attach Mounting Screws, Lock
Washers and Hex Nuts to Crossbar
A. Line up a set of holes on the Crossbar (A) and Holes on the Ceiling Canopy (F).
B. Thread Mounting Screws (B) into the holes on the
Crossbar (A), pass Lock Washers (C) and thread Hex Nut
(D) onto the Mounting Screws (B). Hand tighten until snug.
Mounting Screw
Lock Washer
Ceiling
Canopy
Crossbar
Hex Nut
Figure 3
Thank you for purchasing a Quoizel product.
Need assistance with parts or assembly? Call Quoizel customer service at 1-631-273-2700 or visit us on-line at www.quoizel.com
2015 QuoizelInc.
December2015
3of5
6 CORPORATE PARKWAY
GOOSE CREEK SC 29445
.
.
Assembly Instruction Sheet #IS-TRG1508
For Styles TRG1508OZ and TRG1508BN
STEP 4
-
Attach Crossbar to Outlet Box
A. Attach the Crossbar (A) to Outlet Box and secure by threading Outlet Box Screws (not supplied) into the
Mounting Holes on the Outlet Box. Tighten until snug.
Figure 4
Outlet
Box
Crossbar
Mounting
Hole
Outlet Box
Screw
STEP 5
-
Make Wire Connections
A. Use standard wire connectors to make all wire connections. (Connectors are not included with fixture.)
Strip and prepare wire ends according to instructions supplied with connectors.
B. Connect White Supply Wire from the Outlet Box to White
Wire from fixture.
C. Connect Black (or Red) Supply Wire from the Outlet Box to Black Wire from fixture.
D. Connect Ground Wire from the Outlet Box to Ground
Wire from fixture.
E. Twist connectors until wires are tightly joined together.
F. Wrap each connection with approved electrical tape and carefully stuff all the connected wires into the Outlet Box.
Figure 5
White wire from supply
Black wire from supply
(or Red)
Ground wire from supply
White wire from fixture
Black wire from fixture
Ground wire from fixture
Figure 6
Thank you for purchasing a Quoizel product.
Need assistance with parts or assembly? Call Quoizel customer service at 1-631-273-2700 or visit us on-line at www.quoizel.com
2015 QuoizelInc.
December2015
4of5
6 CORPORATE PARKWAY
GOOSE CREEK SC 29445
.
.
Assembly Instruction Sheet #IS-TRG1508
For Styles TRG1508OZ and TRG1508BN
STEP 6
-
Attach Ceiling Canopy to Mounting
Screw
A. Place the Ceiling Canopy (F) over the Mounting Screws
(B) and secure with Mounting Balls (E). Hand tighten until snug.
Mounting
Screw
Figure 7
Ceiling Canopy
Mounting
Ball
STEP 7
-
Attach Shade to Fixture Body
A. Place Shade (H) over the Socket, secure by thread the
Socket Collar (L) onto the Socket, hand tighten until snug.
Figure 8
Socket
Shade
Socket Collar
STEP 8
-
Install Bulb
A. This fixture uses Medium Base Decorative Filament 60W bulb, Maximum 100W.
B. Insert bulb and screw properly into place.
Your fixture is now assembled and ready to use.
Enjoy!
Figure 9
Socket
Bulb
Thank you for purchasing a Quoizel product.
Need assistance with parts or assembly? Call Quoizel customer service at 1-631-273-2700 or visit us on-line at www.quoizel.com
2015 QuoizelInc.
December2015
5of5

Public link updated
The public link to your chat has been updated.
Advertisement