NetKey
®
Category 6A
Punchdown Jack Module
D A T A S H E E T s p e c i f i c a t i o n s
Category 6A/Class E
A
, 8-position keystone jack module shall terminate unshielded twisted 4-pair,
22 – 26 AWG, 100 Ohm cable. Punchdown tool properly terminates each conductor for optimum performance. Universal label is color-coded T568A and T568B wiring schemes. t e c h n i c a l i n f o r m a t i o n
Category 6A/Class E
A channel and component performance:
Exceeds ANSI/TIA-568-C.2 Category 6A and ISO 11801 Class E
A channel requirements at swept frequencies up to 500 MHz
Exceeds ANSI/TIA-568-C.2 and ISO 11801 Class E swept frequencies up to 500 MHz
A standards at
FCC compliance: Complies with ANSI/TIA-1096-A (formerly FCC Part 68); contacts plated with 50 microinches of gold for superior performance
IEC compliance: Meets IEC 60603-7
PoE compliance: Rated for 2500 cycles with IEEE 802.3af/802.3at and proposed
802.3bt type 3 and type 4
Safety compliance: cULus Listed; UL 1863 and CAN/CSA-C22.2 (UL File E129886)
Operating Temperature: -10°C to 65°C (14°F to 149°F)
RoHS compliance: Compliant k e y f e a t u r e s a n d b e n e f i t s
100% performance tested
110 style punchdown termination
Confidence that each jack module delivers specified performance
Utilizes industry standard termination style and includes wire retention cap
Modular Universal keystone jack modules snap in and out of all NetKey ®
Faceplates, Modular Patch Panels, and Surface Mount Boxes for fast moves, adds, and changes
Individually serialized
Convenience packaging
(optional)
Marked with quality control number for future traceability
25 jacks packaged in one easy to open container, eliminating the time to open each individual package and reducing on-site waste; ideal for high volume installations
NetKey
®
Category 6A Jack Module
Module:
Bulk pack of
NK6X88M*
24 jack modules: NK6X88M*-Q
Termination and Cable Prep Tools
Punchdown tool: PDT110‡
Punchdown base: NKSPB
JackRapid +
Termination Tool: JR-PAN-2‡‡
Cable snipping tool:
Cable stripping tool:
CWST
CJAST
*To designate a color, add suffix IW (Off White),
EI (Electric Ivory), IG (Int’l Gray), WH (White),
BL (Black), OR (Orange), RD (Red), BU (Blue),
GR (Green) or YL (Yellow).
‡Terminates the NetKey
®
Keystone
Punchdown Jack Module and NetKey
®
Patch Panel.
‡‡Terminates the NetKey ® Keystone
Punchdown Jack Module. Fluke JackRapid
Termination Tool available through distribution. To locate the local office,
+ visit www.flukenetworks.com/contact.
+ JackRapid is a trademark of Fluke Networks.
a p p l i c a t i o n s
NetKey ® Category 6A Punchdown Jack
Modules provide a cost effective medium for ensuring that network bandwidth needs are easily met today and tomorrow. The NetKey ®
Solution helps organizations efficiently and reliably meet data transmission needs.
With certified performance to ISO 11801 and
ANSI/TIA-568-C.2 Category 6A component standards, this system will support high bandwidth applications such as those required by education, healthcare, finance, and banking.
www.panduit.com
NetKey
®
Category 6A Punchdown Jack Module
T e s t R e s u l t s
Mechanical Test
Normal Force
Vibration
Shock
Durability
Mating/Un-Mating
Termination Cycles
Electrical Test
Low Level Circuit Resistance
Dielectric Withstand Voltage
Insulation Resistance
Environmental Test
Temperature Life
Humidity
Thermal Shock
Climatic Sequence
Flowing Mixed Gas Corrosion
Test Method
—
IEC 512-6d
IEC 512-6c
IEC 512-9a
IEC 512-13b
IEC 352
Test Method
IEC 512-2a
IEC 512-4a
IEC 512-3a
Test Method
IEC 512-9b
IEC 512-11c
IEC 512-11d
IEC 512-11a
IEC 512-11g
Measurement
Load (grams)
Circuit Resistance (mOhms)
Contact Disturbance (microseconds)
Circuit Resistance (mOhms)
Mating Force (N)
Un-Mating Force (N)
Number of Cycles
Measurement
Resistance (mOhms)
1000 V, 1 minute
Resistance (mOhms)
Measurement
Circuit Resistance (mOhms)
Circuit Resistance (mOhms)
Circuit Resistance (mOhms)
Circuit Resistance (mOhms)
Circuit Resistance (mOhms)
Typical Test Results
>100
<40
<5
<40
<20
<20
<20
Typical Test Results
<20
Passed
>500
Typical Test Results
<40
<40
<40
<40
<40
.875
[22.23]
1.16
[29.50]
0.645
[16.38]
PANDUIT US/CANADA
Phone: 800.777.3300
PANDUIT EUROPE LTD.
London, UK
Phone: 44.20.8601.7200
Dimensions are in inches. [Dimensions in brackets are metric].
WORLDWIDE SUBSIDIARIES AND SALES OFFICES
PANDUIT SINGAPORE PTE. LTD.
Republic of Singapore
Phone: 65.6305.7575
PANDUIT JAPAN
Tokyo, Japan
Phone: 81.3.6863.6000
PANDUIT LATIN AMERICA
Guadalajara, Mexico
Phone: 52.33.3777.6000
PANDUIT AUSTRALIA PTY. LTD.
Victoria, Australia
Phone: 61.3.9794.9020
For a copy of Panduit product warranties, log on to www.panduit.com/warranty
For more information
Visit us at www.panduit.com
Contact Customer Service by email: [email protected] or by phone: 800.777.3300
©2021 Panduit Corp.
ALL RIGHTS RESERVED.
NKDS52--WW-ENG
7/2021
