Honda HR-V (2016-2021) 21YM Owner Manual 133 Pages
advertisement
The information and specifications included in this publication were in effect at the time of approval for printing. Honda Motor Co., Ltd., reserves the right, however, to discontinue or change specifications or design at any time without notice and without incurring any obligation.
Accessories Precautions
The GPS antenna is located in the dashboard. Metallic front or side window tinting can seriously degrade or obstruct GPS reception.
Signal noise from devices such as radar detectors, vehicle tracking devices, remote starters, and additional amplifiers can disrupt the navigation system. If you install any such item, install it away from the navigation display and antenna.
Important Safety Information
3
WARNING
Using the navigation system while driving can take your attention away from the road, causing a crash in which you could be seriously injured or killed.
Only operate system controls when the conditions permit you to safely do so.
Avoid focusing on the screen or manually operating the system controls while driving.
Certain on-screen controls are disabled when driving. Pull to the side of the road if you need to devote more attention and time to look at the screen or access additional menus.
Route guidance may conflict with street closures, road construction, detours, and out-of-date map data.
The system itself may also have limitations. Verify route information by carefully observing roads, signs, and signals. Always use your own judgment and obey traffic laws.
2
NOTICE
Clean the screen with a soft, damp cloth. You may use a mild cleaner intended for use on navigation screens.
2
2
2
2
2
Driving to Your Destination 75
Contents
2
Quick Reference Guide
Overview—Functions at a Glance
Navigation
You can select any place/landmark as a destination by using the touch screen. The navigation system gives you turn-by-turn driving directions to your destination.
Store home address
Register
1
home address.
Store contacts
Store locations to use as the destination.
Enter destination
Select your destination using
9
methods.
Select route
Set route preferences and select one of different routes.
Track route
Follow your route in real-time with voice guidance.
Traffic Information *
View and avoid congestion and traffic incidents.
*: Available only in certain areas.
Avoid certain areas
Set streets and areas to detour around.
Add waypoints
Add “pit stops” along your route.
HOME Screen
The system displays various functions from the HOME screen. Select HOME at any time to return to the main HOME screen.
(Power)
Select and hold the button for about ten seconds to reboot the system.
HOME
Display the HOME screen.
VOL (Volume)
Increase or decrease audio volume.
MENU
Display the menu screen of each function (this is not used in the navigation app).
BACK
Go back to the previous screen.
(Display Mode)
Switch between Day and Night mode manually.
Navigation
Display the map screen and operate the navigation system.
App/Widget List
Display the App/Widget List . You can also display the navigation menu screen to select from the App/Widget List .
Navigation app
Navigation Menu Screen
Display the map screen and operate the navigation features.
GPS signal strength
Display the satellites status.
Where To?
Select search methods to enter a destination for route guidance.
Apps
Display the useful functions incorporated into the navigation system.
View Map
Display the map screen.
Settings
Change settings for navigation functions.
3
4
Touchscreen Operation
You can operate the system using your finger on the touchscreen.
The touchscreen can be operated if you are wearing thin gloves, but it may be more difficult for the system to respond.
Tap
Touch the screen lightly with your finger to select an item on the screen.
Slide
Move your finger slowly across the screen to scroll the map.
Flick
Lightly sweep your finger side to side or up and down to scroll a list or map.
Pinch In/Out
Open or close your fingers on the screen in a pinching motion to zoom in or out of the map.
How to Enter Information
You can enter information (e.g., town names, street names, numbers, and symbols) when prompted on input screens by a different method.
Using the Touchscreen
Select a character or icon on the screen to select it.
Select to remove the last entered character.
Select to remove all entered characters.
Select
Select
Select
Select
to display upper/lower case characters.
to enter a space character.
to display other types of characters.
to change the keypad language.
Help
This navigation system comes with help information, which tells you how to use this navigation.
a Press the HOME button and then select Navigation .
b Select Apps .
c Select Help .
d Select a help topic.
On input search screens, the suggested search terms are displayed.
Select to display a list of possible entries.
Select to search help topics by keyword.
You can also display a help topic to select on each menu screen.
5
6
Map Screen Legend
The colour of the map is different depending on the selected language.
Map scale
Landmark icons
Map operation icons
Traffic incident icons
Current vehicle position
Map menu
Feature areas
Current street name
Streets
Traffic flow indicator
Traffic is flowing normally.
Traffic is slightly congested.
Traffic is heavily congested or stopped.
Traffic has not updated.
During Route Guidance
During route guidance, route information is displayed on the map screen.
You can see the detailed information on the turn information screen.
Map Screen
Next guidance indicator
Distance to the next guidance point and street name of next guidance point.
Stop guidance icon
Waypoint
Calculated route
Estimated time of arrival
Guidance Screen
Street name of next guidance point
Scrolls key
Select this key to scroll the display.
Speed limit icon
Day or Night Mode
Press the (Display mode) button to manually switch between Day and
Night mode.
Day Mode Night Mode
Estimated time to next guidance point
Distance to next guidance point
7
8
Navigation—Home Addresses and Going Home
The “Home” feature automatically routes you to your home address from any location simply by selecting Go Home . You can store one home address.
The order of the steps may change depending on the map data loaded on your device.
Storing Your Home Address
f Enter a house number and then select
Done .
i Select an address from the list.
j Select Select .
a Press the HOME button and then select Navigation .
b Select Where To?
.
c Press and then select Set Home
Location .
g Enter a street and then select Done .
Going Home
a Press the HOME button and then select Navigation .
b Select Where To?
.
c Select Go Home .
d Select Enter My Address .
e Select Search All .
h Select a street from the list.
If the select Town screen is displayed, select a town.
Navigation—Entering a Destination
Enter your destination using one of several methods, then follow route guidance on the map to your destination.
The order of the steps may change depending on the map data loaded on your device.
a Press the HOME button and then select Navigation .
b Select Where To?
.
c Select Address .
f Enter the name of your destination street and select Done .
i Select Go!
.
Route guidance to the destination begins.
g Select your destination street from the list.
Routes : Choose one of multiple routes.
d Select Search All .
e Enter the house number and select
Done if necessary.
If the select Town screen is displayed, select a town.
h Select an address from the list.
: Display your destination map and save a place.
9
10
Navigation—Changing Route or Destination
You can alter your route by adding waypoints to visit, adding streets to avoid, or changing your destination during route guidance.
Adding a Waypoint (“Pit Stop”)
You can add waypoints along your route.
a Press the HOME button and then select Navigation .
b Select Where To?
.
c Select search method.
d Select the location to add to the destination list and select Go!
.
e Select Add to Active Route .
f If necessary, edit the order of the destinations and select Done .
Changing Your Destination
There are three methods you can use to specify a new destination during route guidance.
Searching nearby hospitals, police stations, or fuel stations
Select the vehicle icon and select an item.
Selecting an icon on the map
Select a place/landmark icon or a new area on the map twice.
Entering a new destination
Select Where to?
and then enter a new destination.
Cancelling Your Route
a Press the HOME button and then select Navigation .
b Select View Map .
c Select .
Troubleshooting
Why does the vehicle position icon on the map appear slightly off my actual position, especially at intersections?
This is normal. The navigation system is unaware of the width of intersections. Large differences in vehicle position can indicate a temporary loss of the GPS signal.
Why does the “arrival time” display sometimes increase even though I am getting closer to my destination?
The “arrival time” is based on the speed limit on each road. Depending on the traffic conditions, the “arrival time” may be calculated to be earlier or later.
Why does my clock frequently change the time forward and backward by one hour?
The clock setting is automatically updated based on your
GPS location.
2
For more Information
How do I turn on the navigation system voice guidance?
1.
Press the HOME button.
Select Navigation > Settings > Navigation .
Check that Voice Prompts is not set to off.
2.
Press the HOME button and then select Settings .
Select System , and then select Sound/Beep tab.
Check that Volume is not set to 0.
My battery was disconnected or went dead, and the navigation system is asking for a code. Where do I find it?
In most cases, you do not need to enter a code. Simply press and hold the (Audio Power) button for two seconds; the system should reactivate.
2
How do I specify a destination when an entered town or street could not be found?
Try selecting the destination directly from the map.
11
How to Use This Manual
This section explains different methods on how you can easily find information in this manual.
12
Searching the Table of Contents
Two types of Tables of Contents help you find your desired information.
More Detailed
Contents
Table of Contents
First, find the general chapter related to what you are looking for (e.g., entering a destination from the Favourites).
Then, go to that chapter to view a more specific table of contents.
Chapter Contents
This more detailed table of contents shows you exactly what information is listed by section and title.
Searching the Index
Menu items displayed on the navigation screen (e.g., Favourites ) can be found individually in the Index.
Navigation Screen
Index
The Index consists of main terms and subentries. The sub-entries help you get to the desired page depending on what you are looking for.
Go to the
Next Page
After following the menu tree, step-by-step instructions explain how to achieve the desired result.
Menu Tree
The menu tree helps guide you through the system’s menu options.
To get to your desired function, follow the menu tree in order of the steps shown.
HOME Navigation Where To?
Favourites
Select the item on the system control panel.
Select HOME .
* Sample pages and images in this section may differ from the actual ones.
Select the menu option.
Select Favourites .
13
14
System Setup
This section describes the start-up procedure and the navigation and setup functions.
Start-up ....................................................16
Personal Information ...............................17
Setting Home Location............................18
Deleting Shortcuts ..................................19
Favourites Locations ................................20
Display Mode Settings ............................26
Switching Display Mode Manually ...........26
Map & Vehicle ..........................................28
Vehicle....................................................29
Driving Map View (Map Orientation) .......30
Map Detail ..............................................31
Map Theme ............................................32
Map Buttons ...........................................33
Map Layers .............................................34
Dashboards ............................................ 34
myMaps ................................................. 35
Navigation ............................................... 36
Calculation Mode................................... 37
Avoidances ............................................ 38
Custom Avoidances ............................... 39
Traffic ....................................................... 45
Other Settings ......................................... 46
Units & Time .......................................... 46
Language & Keyboard ............................ 49
Device .................................................... 52
Data Reset ............................................... 54
Reset Factory Default Settings ................ 54
15
16
Start-up
The navigation system starts automatically when you set the power mode to
ACCESSORY or ON. At start-up, the following Confirmation screen is displayed.
1.
Select OK .
u The HOME screen is displayed.
u If you do not select OK , the screen will become completely black after 30 seconds.
2.
Select Navigation .
1
Avoid focusing on the screen and drive safely following the actual traffic restrictions.
If the navigation system loses power at any time, you may need to press and hold the (Audio Power) button for more than two seconds, or you may be prompted for the 5-digit security code.
2
You can also start the navigation app by selecting on the HOME screen.
2
When you use the navigation app, the system may close other apps.
When connected via a Bluetooth ®
HandsFreeTelephone, the navigation app screen will switch to the incoming screen when receiving a call.
3.
Select Agree .
Personal Information
H
HOME u Where To?
Use the personal information menu to set your home location. You can also delete unwanted shortcuts.
1.
Select .
u The menu screen is displayed.
2.
Select an item.
The following items are available:
• Set Home Location : Sets your home location.
2
• Remove Shortcut(s) : Deletes shortcuts.
2
17
18 uu Setting Home Location
Setting Home Location
H
HOME u u u u
1.
Select an item.
2.
Select the home location.
3.
Select Select .
The following items are available:
• Enter My Address : Sets the home location by entering the address.
2
Storing Your Home Address P. 8
• Use My Current Location : Sets your current location as your home location.
• Choose from Recently Found : Sets the home location from a recently found location.
Deleting Shortcuts
H
HOME u u u u
1.
Select a shortcut with the if you want to delete.
uu Deleting Shortcuts
2.
Select a shortcut again.
3.
Select Save .
19
20 uu Favourites Locations
Favourites Locations
You can save locations so you can quickly find them and create routes to them.
■
Saving a Favourite Location
1.
Display the screen where the location of the destination can be confirmed.
2
2.
Select .
3.
Select Save .
4.
Select OK .
■
Saving Your Current Location
H
HOME u View Map
1.
Select the vehicle icon.
2.
Select Save .
uu Favourites Locations
1
Vehicle position may not be displayed when:
• The automobile is travelling off-road.
• The vehicle position data cannot be updated.
3.
Enter a name of the location.
4.
Select Done .
5.
Select OK .
Continued 21
22 uu Favourites Locations
■
Editing a Favourite Location
H
HOME u u u
1.
Select a saved location you want to edit.
2.
Select .
3.
Select .
4.
Select Edit .
5.
Select an item.
The following items are available:
• Name : Enters a new name for the location.
• Phone Number : Enters a phone number.
• Categories : Creates or changes the category in which this location is saved.
• Change Map Symbol : Selects a new symbol.
uu Favourites Locations
Continued 23
24 uu Favourites Locations
■
Deleting a Favourite Location
H
HOME u u u
1.
Select a saved location you want to delete.
2.
Select .
3.
Select .
4.
Select Delete .
5.
Select Yes .
■
Deleting Favourites Locations
H
HOME u u u
1.
Select .
2.
Select Delete Favourite(s) .
3.
Select a saved location you want to delete.
u Select Select All to delete all saved locations.
4.
Select Delete .
5.
Select Yes .
uu Favourites Locations
25
26
Display Mode Settings
Switching Display Mode Manually
Set the screen brightness separately for Day and Night modes. Press the
(Display mode) button to cycle through the display modes (Day to Night to Off).
Press the (Display mode) button.
u The Brightness bar is displayed for a few seconds.
u Select or to adjust the brightness.
1
Switching Display Mode Manually
You can also adjust the display brightness by sliding or flicking on the bar.
uu Switching Display Mode Manually
Illumination control
button
Dash illumination adjustment buttons (see your
Owner’s Manual for location)
Headlights
(Auto * /On/Off)
Priority
1
2
3
Operation
Selects Day or Night display mode when the user wants to change the brightness of the display temporarily.
Remember: This button overrides all other display brightness adjustment that is set by the sunlight sensor automatically or you changed manually from the System settings screen.
When the headlights are turned on, and you wish to have the Day display mode, adjust the illumination to the full brightness (beeps).
Remember: Adjust the dash brightness back to midrange to allow auto switching by sensing the headlights are on or off.
When turned on, the display changes to Night display mode.
The previous three controls listed above can
“cancel” this function.
Remember: Use the button, or adjust the dash illumination to full brightness, to set the display to your desired choice.
27
Map & Vehicle
H
HOME u u u
Change the map settings.
Select an item.
28
The following items are available:
• Vehicle : Changes the icon to represent your position on the map.
2
• Driving Map View : Sets the perspective on the map.
2
Driving Map View (Map Orientation) P. 30
• Map Detail : Sets the level of detail on the map. More detail may cause the map to draw slower.
2
• Map Theme : Changes the colour of the map data.
2
• Map Buttons : Sets which icons are included on the map. Up to three icons can be included on the map.
2
• Map Layers : Sets the data that appears on the map.
2
• Dashboards : Sets the map dashboard layout.
2
• Auto Zoom : Sets whether to the auto zoom on the map screen.
• myMaps : Sets which installed maps the device uses.
2
Vehicle
H
HOME u u u Vehicle
You can choose your vehicle icon.
1.
Select an option.
2.
Select Save .
uu Vehicle
29
30 uu Driving Map View (Map Orientation)
Driving Map View (Map Orientation)
H
HOME u u u Driving Map View
Select the map orientation.
1.
Select an option.
2.
Select Save .
The following options are available:
• Track Up : Displays the map with your direction of travel facing upwards.
• North Up : Displays the map with North always pointing up.
• 3-D (factory default): Displays the map in 3D with your direction of travel facing upwards.
Map Detail
H
HOME u u u Map Detail
Set the level of detail on the map.
1.
Select an option.
2.
Select Save .
The following options are available:
• More : Sets the level of detail shown on the map to most.
• Normal (factory default): Sets the level of detail shown on the map to normal.
• Less : Sets the level of detail shown on the map to least.
uu Map Detail
31
32 uu Map Theme
Map Theme
H
HOME u u u Map Theme
Change the colour of the map data.
1.
Select an option.
2.
Select Save .
uu Map Buttons
Map Buttons
H
HOME u u u Map Buttons
Set the shortcuts that appear in the map tools menu.
1.
Select if you want to delete and then select OK .
2.
Select to add new shortcut.
1
Reset to Defaults
Resets the settings to the factory defaults.
3.
Select an option.
4.
Select Save .
33
34 uu Map Layers
Map Layers
H
HOME u u u Map & Vehicle Map Layers
Set the data that appears on the map screen.
1.
Select an option.
2.
Select Save .
Dashboards
H
HOME u u u Map & Vehicle Dashboards
Switch the dashboard layout.
1.
Select or .
2.
Select Save .
myMaps
H
HOME u u u myMaps
Set which installed maps the device uses.
Select an option.
uu myMaps
35
Navigation
H
HOME u u u
Change the navigation settings.
36
The following items are available:
• Calculation Mode : Sets route preference.
2
• Avoidances : Sets road features to avoid on a route.
2
• Custom Avoidances : Allows you to avoid specific roads or areas.
2
• Advanced Detours : Sets the length of the detour.
• Safe Mode : Sets the operation limit while driving.
• Voice Prompts : Turns the voice prompts on or off.
• GPS Simulator : Stops the device from receiving a GPS signal.
1
Safe Mode and GPS Simulator are set to off as factory default.
Calculation Mode
H
HOME u u u Calculation Mode
Set the route preferences (calculating method).
1.
Select an option.
2.
Select Save .
The following items are available:
• Faster Time (factory default): Calculates routes that are faster to drive but can be longer in distance.
• Shorter Distance : Calculates routes that are shorter in distance but can take more time to drive.
• Less Fuel : Calculates routes that could use less fuel than other routes.
uu Calculation Mode
37
38 uu Avoidances
Avoidances
H
HOME u u u Avoidances
1.
Select an option.
2.
Select Save .
1
Motorways , Toll and Fees and Ferries are set to off as factory default.
The following items are available:
• U-Turns : Avoids u-turns.
• Motorways : Avoids motorways.
• Toll and Fees : Avoids toll roads.
• Ferries : Avoids ferries.
• Car Share Lanes: Avoids car share lanes.
• Unpaved Roads : Avoids unpaved roads.
Custom Avoidances
H
HOME u u u Custom Avoidances
This function allows you to avoid specific areas and sections of road. You can enable and disable custom avoidances as needed.
Select an option.
u Select Add New Custom
Avoidance if custom avoidances are already stored.
The following options are available:
• Add Avoid Area : Sets an avoid area.
2
• Add Avoid Road : Sets an avoid road.
2
uu Custom Avoidances
Continued 39
40 uu Custom Avoidances
■
Adding an Avoid Area
H
HOME u u u Custom Avoidances
1.
Select the upper-left (right) corner of the area to avoid. Select Next .
u The icon is displayed on the map.
2.
Select the lower-right (left) corner of the area to avoid. Select Next .
u The selected area is shaded on the map.
3.
Select Done .
■
Adding an Avoid Road
H
HOME u u u Custom Avoidances
1.
Select the starting point of the section of road to avoid. Select
Next .
u The icon is displayed on the map.
uu Custom Avoidances
Continued 41
42 uu Custom Avoidances
2.
Select the ending point of the road section. Select Next .
u The selected road is displayed in pink.
3.
Select Done .
■
Editing a Custom Avoidance
H
HOME u u u Custom Avoidances
1.
Select the area or road to edit from the list.
2.
Select .
u The menu screen is displayed.
3.
Select an item.
The following items are available:
• Rename : Enters a new name.
• Delete : Deletes a selected area or road.
• Disable : Disables the avoidance.
Continued uu Custom Avoidances
43
44 uu Custom Avoidances
■
Deleting Custom Avoidances
H
HOME u u u Custom Avoidances
1.
Select .
2.
Select items you want to delete.
u Select Select All for all items in the list.
3.
Select Delete .
Traffic
H
HOME u u u
Select an item.
The following items are available:
• Traffic : Enables the traffic feature.
• Current Provider : Sets the traffic provider to use for traffic data.
• Subscriptions : Displays the lists of the current traffic subscriptions.
• Optimise Route : Sets whether to use Optimised routes On Request or
Automatic .
On Request : Changes the route when receiving the traffic information.
Automatic : Automatically optimises the route when receiving the traffic information.
1
Traffic information is available in certain areas.
45
46
Other Settings
Units & Time
H
HOME u u u
Set the time format and adjust the current time for navigation screen. You can also set the map units.
Select an item.
The following items are available:
• Current Time : Sets the device time.
2
• Time Format : Allows you to select a 12-hour, 24-hour, or UTC display time.
2
• Units : Sets the unit of measure used for distances.
2
uu Units & Time
■
Current Time
H
HOME u u u Current Time
Flick to adjust the current time.
1
Automatic
Sets the time automatically when your navigation system is receiving satellite signals. Factory default is on.
■
Time Format
H
HOME u u u Time Format
1.
Select an item.
2.
Select Save .
The following items are available:
• 24-Hour : Displays the 24 hour clock.
• 12-Hour : Displays the 12 hour clock.
• UTC : Displays UTC (Coordinate Universal Time) time.
Continued 47
48 uu Units & Time
■
Units
H
HOME u u u Units
1.
Select an item.
2.
Select Save .
The following items are available:
• Miles : Sets the units to miles.
• Kilometres : Sets the units to kilometres.
Language & Keyboard
H
HOME u u u
Set the language for the unit and the keyboard layout.
Select an item.
uu Language & Keyboard
1
When you select a language for the system, the language setting of the navigation app is automatically switched.
See the Owner’s Manual for instructions.
The following items are available:
• Voice Language : Sets the language for voice prompts.
2
• Keyboard Language : Sets the language for your keyboard.
2
• Keyboard Layout : Sets the keyboard layout.
2
Continued 49
50 uu Language & Keyboard
■
Voice Language
H
HOME u u u Voice
Language
1.
Select the language from the list.
2.
Select Save .
■
Keyboard Language
H
HOME u u u Keyboard
Language
1.
Select the language from the list.
2.
Select Save .
■
Keyboard Layout
H
HOME u u u Keyboard
Layout
1.
Select an option.
2.
Select Save .
The following options are available:
• QWERTY (factory default): Sets the keyboard layout to QWERTY.
• ABCDE : Sets the keyboard layout to ABCDE.
uu Language & Keyboard
51
52 uu Device
Device
H
HOME u u u
Select an option.
The following options are available:
• About : Displays the device information.
2
• Travel History : Allows the device to record information for suggested routes, previous routes and destinations, and Trip Log features.
• Clear Travel History : Deletes the recorded information.
• Update Map : Displays the description screen of map updates.
2
Obtaining a Navigation Update P. 127
■
About
H
HOME u u u About
Display the device information.
uu Device
53
54
Data Reset
Reset Factory Default Settings
H
HOME u Settings u
You can restore all settings to the factory default values.
1.
Select Restore .
2.
Select Yes .
1
Reset Factory Default Settings
If you want the navigation app set to the factory default, select the Factory Data Reset of the system.
For more details, see the Owner’s Manual.
When you select in each settings category, you can restore the selected category.
Navigation
This section describes how to enter a destination, select a route to take, and follow the route to your destination. It also describes how to change your route or destination along the way.
Entering a Destination ........................... 56
HONDA ................................................. 59
Address ................................................. 60
Categories ............................................. 65
Favourites .............................................. 70
History ................................................... 70
Map Input.............................................. 71
Calculating the Route ............................. 72
Viewing the Routes ................................ 73
Viewing the Destination Map ................. 74
Driving to Your Destination ................... 75
Viewing the Route ................................. 75
Map Operation ........................................79
Map Menu..............................................80
Traffic Information (For applicable countries) ......................................... 84
Changing Your Route ..............................86
Stopping the Route .................................86
Taking a Detour ......................................86
Adding Waypoints ..................................88
Editing the Destination List......................89
Changing Your Destination ....................93
Selecting a Destination on the Map.........93
Searching Near Establishment .................94
Entering a New Destination.....................96
Entering a New Destination from Trip
Planner................................................. 97
55
Entering a Destination
H
HOME u Where To?
This section describes how to enter a destination for route guidance.
Select an item.
56
Shortcuts
The following items are available:
• Enter Search : Sets a destination by entering a category, brand name, address, or town name.
2
• Searching near: : Sets by selecting search area.
2
Changing the Search Area P. 58
• Go Home : Sets your home address as a destination.
2
• HONDA : Sets a destination by entering a Honda dealer.
• Address : Sets a destination by entering an address.
2
• Categories : Sets a destination by selecting a category.
2
• Favourites : Sets a destination by selecting a place stored in the Favourites list.
2
uu u
• History : Sets a destination by selecting a previous destination.
2
• Personalise : Adds shortcuts to Where To?
menu.
2
■
Using the Search Bar
H
HOME u u u
You can use the search bar to search for locations by entering a category, brand name, address, or town name.
1.
Enter a search term.
u Suggested search terms appear below the search bar as you type.
2.
Select or suggested search term.
1
• To search for a type of business, enter a category name, such as “movie theatres.”
• To search for a business by name, enter all or part of the name.
• To search for an address near you, enter the street number and street name.
• To search for an address in another town, enter the street number, street name, town, and state.
• To search for a town, enter the town and state.
3.
Select your destination from the list.
4.
Set the route to your destination.
2
Continued 57
58 uu u
■
Changing the Search Area
H
HOME u u u
By default, your device finds locations closest to your current location. You can find a location near another town or location.
Select an item.
1
My Current Route and My Destination can be set when the route is active.
The following items are available:
• Where I Am Now : Searches near your current location.
• My Current Route : Searches along your current route.
• My Destination : Searches near your current destination.
• A Different Town : Searches near the town you enter.
• A Recent Destination : Searches near a recent destination.
• A Favourite Destination : Searches near a favourite place.
uu HONDA
■
Adding Shortcuts
H
HOME u u u
Up to 36 shortcut icons can be stored.
Select an item you want to add a shortcut.
1
You can delete unwanted shortcuts.
2
HONDA
H
HOME u u u
Find any HONDA services for a destination.
1.
Select the desired name from the list.
2.
Set the route to your destination.
2
59
60 uu Address
Address
H
HOME u u u
Enter an address to use as the destination. The country you are currently in is displayed (e.g., United Kingdom).
Select an item.
The following items are available:
• Spell Town : Selects your destination town.
2
• Spell Post Code : Selects your destination post code.
2
• Search All : Sets an address to use as the destination.
2
• Change Country : Selects the country.
2
■
Selecting the Country
H
HOME u u u Change Country
1.
Enter a Country name.
2.
Select a Country from the list.
uu Address
Continued 61
62 uu Address
■
Search All
H
HOME u u u Search All
1.
Enter the house number. Select
Done .
2.
Enter the street name. Select
Done .
u A list of matching hits is automatically displayed after you enter several letters, with the closest match at the top of the list.
3.
Select your destination street from the list.
u If the select Town screen is displayed, select a town.
4.
Set the route to your destination.
2
1
The order of the steps may change depending on the map data loaded on your device.
uu Address
■
Selecting the Town
H
HOME u u u Spell Town
1.
Enter the name of a different town. Select Done .
u A list of matching hits is automatically displayed after you enter several letters, with the closest match at the top of the list.
1
You do not need to enter spaces or symbols (e.g., &,
-, %).
The order of the steps may change depending on the map data loaded on your device.
2.
Select your destination town from the list.
u Next, you are prompted to enter a house number.
2
Continued 63
64 uu Address
■
Selecting the Post Code
H
HOME u u u Spell Postal Code
1.
Enter the postal code. Select
Done .
2.
Select your destination postal code from the list.
3.
Enter the house number. Select
Done .
4.
Enter the street name. Select
Done .
1
The order of the steps may change depending on the map data loaded on your device.
5.
Select your destination street from the list.
2
uu Categories
Categories
Select the category of a place (e.g., Restaurants, Petrol Stations, Shopping) stored in the map database to search for the destination.
■
Finding a Location by Category
H
HOME u u Categories
1.
Select a category.
1
This option is convenient if you do not know the exact name of a place or if you want to narrow down the number of matches returned for places with a common name.
When you set the destination or waypoint, the same categories of icons do not appear.
Quick Search screen
After you have performed a search for a destination, certain categories display a Quick Search list that display the four destinations you selected.
2.
Select a subcategory.
u If subcategory screen is not displayed, proceed to step 3.
Continued 65
66 uu Categories
3.
Select a place name from the list.
4.
Set the route to your destination.
2
uu Categories
■
Finding a Location by Junctions
H
HOME u u u Junctions
Select the intersection of two streets as the destination.
1.
Select Spell Town .
u If select Search All , proceed to step 3.
u Select Change Country , if necessary.
2
1
Finding a Location by Junctions
If there is more than one junction, you are prompted to select the junction. If the two streets that you have selected do not intersect, no junction is entered.
2.
Enter a town name. Select Done .
u A list of matching hits is automatically displayed after you enter several letters, with the closest match at the top of the list.
3.
Select a town.
Continued 67
68 uu Categories
4.
Enter the street 1 name. Select
Done .
u A list of matching hits is automatically displayed after you enter several letters, with the closest match at the top of the list.
5.
Select the street from the list.
u Repeat step 4 to search the second street.
6.
Select the intersection.
7.
Set the route to your destination.
2
■
Finding a Towns
H HOME u u u Towns
Select your destination town centre.
1.
Select a town.
u Select Enter Search and enter a town name if you want to narrow down the number of matches.
2.
Set the route to your destination.
2
uu Categories
■
Finding a Location Using Coordinates
H
HOME u u u Coordinates
You can find a location using latitude and longitude coordinates. This can be helpful when geocaching.
1.
Select the latitude coordinate.
2.
Enter the new coordinate. Select
Done .
3.
Select the longitude coordinate.
4.
Enter the new coordinate. Select
Done .
5.
Select View on Map .
6.
Set the route to your destination.
2
1
Finding a Location Using Coordinates
If you want to change the coordinate format, select
and then select Format .
69
70 uu Favourites
Favourites
H
HOME u u u
Select a saved location to use as the destination.
1.
Select your destination from the list.
2.
Set the route to your destination.
2
1
If you want to delete all saved locations, select and then select Delete Favourite(s) .
History
H
HOME u u u
Select an address from a list of your 50 most recent destinations to use as the destination. The list is displayed with the most recent destination at the top.
1.
Select your destination from the list.
2.
Set the route to your destination.
2
1
If you want to delete all recent destinations, select
and then select Clear .
uu Map Input
Map Input
H
HOME u View Map
Scroll the map to manually select an icon or a location as the destination.
1.
Select any point on the map.
2.
Scroll a map, and select a street, intersection, or category icon you want to set a destination.
u Return to the current location when you select .
3.
Set the route to your destination.
2
1
You can customize the map as you like using ,
2
If you want to display a specific category of places, select and then select a category icon.
The place information is displayed when you select the on the map.
2
Viewing the Destination Map P. 74
71
72
Calculating the Route
This section describes how to calculate your route.
Select Go!
.
u The system calculates and displays the route line on the map screen.
1
If the system has many guidance points on the route to the destination, it may stop at 99% calculation.
In this case, the route guidance will start when you select OK .
The following items are available:
• Routes : Displays different routes.
2
• : Displays your destination map.
2
Viewing the Destination Map P. 74
Viewing the Routes
View different routes to your destination.
1.
Select or to change a route.
u The travel distance, estimated travel time and traffic information are displayed for each route.
2.
Select Go!
.
u The system calculates and displays the route line on the map screen.
uu Viewing the Routes
73
74 uu Viewing the Destination Map
Viewing the Destination Map
1.
Select an item.
2.
Select Go!
.
u The system calculates and displays the route line on the map screen.
1
Select to display the following option:
Save
You can add the destination address to the saved location list.
2
The following items are available:
• Route Info : Displays different routes.
2
• Set Location : Sets the vehicle position when you are indoors or not receiving satellite signals.
Driving to Your Destination
Viewing the Route
This section describes how to follow the route guidance to your destination.
■
Map Screen
Next guidance indicator
After calculating the route to your destination, the route is displayed on the map screen.
2
As you drive, the system tracks your position on the map in real time and provides guidance as you approach each guidance point on the route.
1
Speed limit icon
The speed limit shown on the map may be different from the actual speed limit and Traffic Sign
Recognition System * .
For more details about Traffic Sign Recognition
System, see the owner's manual.
Select the vehicle icon to view the Where Am I?
screen.
2
Viewing the Current Location Information
Speed limit icon
The following items are available:
• Select the text bar on the top of the map to display the turn list screen.
2
• Select the Next guidance indicator to display the turn information screen or junction view screen (Junction view is for applicable countries only).
2
• Select to cancel the route guidance and remove your current route.
2
• Select to display the map menu.
2
• Select to display the parking information screen of nearby parking.
The system clock and navigation app clock are based on different conditions.
Therefore, the system clock and navigation app clock will not match when crossing a time zone and during summertime.
For details on system clock adjustment, see the owner's manual.
You can stop your vehicle en route (e.g., to rest, stop for gas, etc.), and then continue on your route.
If you did not complete your route, the navigation restarts when you restart your vehicle.
Continued
* Not available on all models
75
76 uu Viewing the Route
• Select the arrival time in the lower left to change the information displayed. Select the following options:
Estimated Time of Arrival , Distance to Destination , Estimated Time to
Destination , Via Arrival , Distance to Via , Time to Via , Direction of Travel ,
Elevation or Time of Day .
1
The next guidance indicator does not appear in the following cases.
• The vehicle speed is 3 mph (4.8 km/h) or less
• The GPS signal is weak
• The vehicle position on the map and current vehicle position do not match
The system displays a roundabout to the next guidance indicator in the following cases.
• Its diameter is 82 ft (25 m) or more
• There is no road inside it
• There is no stop sign
■
Turn List
The turn list screen displays turn-by-turn instructions and the distance between turns.
Select the text bar on the top of the map.
u Select a turn to display the detailed information.
2
u Select to display the entire route on the map.
2
uu Viewing the Route
■
Turn Information
The turn information screen displays the turn on the map and the distance and time left before you reach the turn. For applicable countries, the lane assist screen may display a view of the upcoming junction.
Select the upper-left corner of the map or select any turn on the turn list screen.
1
Junction View Screen (For applicable countries)
The junction view screen displays a view of the upcoming junction and which lane you should be driving.
■
Entire Route
The entire route screen displays the entire route, destination name, time to destination, and distance to destination.
1.
Select the text bar on the top of the map.
2.
Select .
3.
Select Map to display the entire route screen.
u Select to return to the previous screen.
1
You can customize the map as you like using
2
,
Continued 77
78 uu Viewing the Route
■
Deviating From the Planned Route
If you leave the calculated route, the system automatically recalculates a route to the desired destination based on your current location and direction.
■
Trip Log Display
If you set the trip log to show, a series of dots (breadcrumbs) is displayed to track the path you are taking.
2
1
You can delete the Trip Log.
2
2
Reset Factory Default Settings P. 54
Map Operation
Customize the map as you like. You can also set a destination and save a place from the map.
1.
Select any point on the map.
2.
Select an option.
u If you want to set a destination or to save a favourite in the map, scroll the map and select the desired location.
2
2
1
When you select Track Up or North Up , the current map scale and the (Track Up only) appear on the map.
The always points North.
2
Driving Map View (Map Orientation) P. 30
The following options are available:
•
•
•
•
•
: Zooms in the map.
: Zooms out the map.
: Switches the map to 2D or 3D.
: Rotates the 3D map in anticlockwise direction.
: Sets the data that appears on the map.
2
79
uu Map Menu
Map Menu
H
HOME u View Map u
Select an item.
80
The following options are available:
• Mute : Turns the voice prompts on or off.
• Stop : Cancels the route guidance and removes your current route.
• Detour : Calculates a detour route.
2
• Exit Services : Displays a list of the exit services for the route.
2
• Where Am I?
: Displays the information about your current location.
2
Viewing the Current Location Information P. 82
• Map Layers : Sets the data that appears on the map.
2
• Where To?
: Enters a new destination using the destination menu even when en route.
2
• ecoRoute TM : Uses the ecoRoute TM features.
2
uu Map Menu
■
Viewing Exit Services
H
HOME u u u u
You can view exit services (e.g. whether the exit is near fuel stations, restaurants, etc.) and add new destinations or waypoints to the calculated route.
1.
Select or to display your desired list of exit services.
2.
Select a category tab.
3.
Select an item.
u The location is displayed on the
Calculate Route screen.
2
1
The map screen of the selected exit is displayed when you select .
Continued 81
82 uu Map Menu
■
Viewing the Current Location Information
H
HOME u u u u
You can confirm your current location, address, and nearest intersection.
Select an item.
1
Viewing the Current Location Information
Vehicle position may not be displayed when:
• The automobile is travelling off-road.
• The vehicle position data cannot be updated.
The following options are available:
• Save : Saves your current location.
2
Saving Your Current Location P. 21
• Hospitals / Police Stations / Fuel : Searches for a hospital, police station, or fuel station around your current location.
2
Searching Near Establishment P. 94
■
Using Direction to Me
H
HOME u u u u
If you need to tell another person how to get to your current location, your device can give you a list of directions.
1.
Select .
2.
Select Directions to Me .
3.
Select an item.
4.
Select Select .
u The turn list screen displays turn-by-turn instructions and the distance between turns.
2
uu Map Menu
83
84 uu Traffic Information (For applicable countries)
Traffic Information (For applicable countries)
When calculating your route, the device examines the current traffic and automatically optimises the route for the shortest time. If a severe traffic delay occurs on your route while you are navigating, your device automatically recalculates the route.
The traffic icon changes colour to indicate the severity of traffic conditions on your route or on the road you are currently travelling. Your device may route you through a traffic delay if a better alternative route does not exist. The delay time is added into your estimated time of arrival automatically.
1.
Select on the map screen.
2.
Select an item.
The following options are available:
• Traffic on Route : Displays the traffic delays on your route. You can select the traffic you want to avoid.
2
Traffic Rerouting Manually P. 85
• Traffic Conditions : Displays a list of traffic delays.
2
• Traffic Legend : Displays an overview of traffic legends.
2
1
Traffic Information (For applicable countries)
The traffic icon changes colour to indicate the severity of traffic conditions.
• Green: Flowing freely.
• Yellow: Moderate traffic condition.
• Red: Very slow or stop-and-go traffic.
• Grey: No traffic data.
Alternate Route
1.
Select while navigating an automobile route.
2.
Select Alternate Route .
3.
Select a route.
uu Traffic Information (For applicable countries)
■
Traffic Rerouting Manually
H
HOME u u u u
View the traffic delays on your route, including the estimated time of each delay and the distance to each delay. You can select the traffic you want to avoid manually.
Select and then select Avoid to avoid the traffic delay.
u Select or to view other traffic delays on your route.
■
Viewing Traffic Delays
H
HOME u u u u
View a list of traffic delays.
1.
Select an item in the list to view the delay on a map.
2.
Select or to change the information if there is more than one delay.
■
Viewing Traffic Legends
H
HOME u u u u
See an overview of the icons and colours used on the traffic map.
u The system displays the traffic legend.
85
86
Changing Your Route
Stopping the Route
H
HOME u View Map u (when en route)
Stop the route guidance and remove the destination and all waypoints from the destination list.
1
You can also stop your route from the map menu.
2
Taking a Detour
H
HOME u u u u (when en route)
Calculate a new route to avoid something ahead of you. The system creates a new route, if possible. The system attempts to get you back on your original route as quickly as possible.
1
If your current route is the only reasonable option, the system might not calculate a detour.
uu Taking a Detour
■
Taking a Detour Around Specified Areas
H
HOME u u u u (when en route)
You can take a detour for a specified distance along your route or detour around specific roads. This is useful if you encounter construction zones, closed roads, or poor road conditions.
Select an item.
1
Taking a Detour Around Specified Areas
You can use this feature when Advanced Detours is set to On.
2
Select to delete all detours.
The following items are available:
• Next 0.5 mile on Route : Calculates a new route by avoiding the next 0.5 mile on your route.
• Next 2 mile on Route : Calculates a new route by avoiding the next 2 miles on your route.
• Next 5 mile on Route : Calculates a new route by avoiding the next 5 miles on your route.
• Detour by Road(s) on Route : Calculates a new route by avoiding the specific roads on your route. Select roads from the turn list.
87
88 uu Adding Waypoints
Adding Waypoints
Add waypoints (pit stops) along the route to your destination.
1.
Select a search method to add a waypoint.
2
2.
Select a place. Select Go!
.
3.
Select Add to Active Route .
u Select Start New Route to set the location as your new destination.
2
4.
Select and move the order of destinations.
5.
Select Done .
u The route is automatically recalculated and displayed on the map screen.
1
When you add a waypoint, the system may take some time to update the arrival time.
uu Editing the Destination List
Editing the Destination List
■
Editing Places on the Your Route
H
HOME u u u (when en route) Unsaved
Trip
1.
Select a place from the destination list.
1
Select Map to display the destination and waypoints on the map screen.
2
2.
Select an item.
The following options are available:
• Departure Time (current location only): Sets the departure time.
• Clear Departure Time (current location only): Clears the departure time.
• Arrival Time (destination and waypoints): Sets the arrival time.
• Clear Arrival Time (destination and waypoints): Clears the arrival time.
• Duration (destination and waypoints): Sets the duration time.
• Change Location : Changes the destination or waypoints.
Continued 89
90 uu Editing the Destination List
• Remove Location : Removes the destination or waypoints.
• Rename Location : Enters a new name for the location.
■
Editing Your Route
H
HOME u u u (when en route) Unsaved
Trip u u
1.
Select and move the order of destinations.
u Select to add a new location.
u Select to delete destinations from the destination list.
2.
Select Save .
u The route is automatically recalculated.
■
Saving Your Route
H
HOME u u u (when en route) Unsaved
Trip u u
1.
Enter a route name.
2.
Select Done .
uu Editing the Destination List
■
Reorder Your Destination List Automatically
H
HOME u u u (when en route) Unsaved
Trip u u
Automatically order the waypoints in the destination list.
Select Map to display the destination and waypoints on the map screen.
1
Reorder Your Destination List Automatically
Select , and then select Review Trip to display the turn list.
2
Continued 91
92 uu Editing the Destination List
■
Recalculate Using Another Route Preference
H
HOME u u u (when en route) Unsaved
Trip u u
The route preference is just for this time. If you want to change the route preference for routing, change the navigation settings.
2
Recalculates the route using another route preference.
1.
Select an item.
2.
Select Save .
u The route is automatically recalculated.
Changing Your Destination
Selecting a Destination on the Map
Select a new destination when en route by selecting a location on the map.
1.
Select any point on the map.
2.
Scroll a map, and select a street, intersection, or category icon you want to set a destination.
3.
Select Go!
.
4.
Select an item.
The following options are available:
• Start New Route : Sets the location as your new destination.
• Add to Active Route : Sets the location as the first waypoint.
2
93
94 uu Searching Near Establishment
Searching Near Establishment
H
HOME u u u u
Search for a hospital, police station, or fuel station around your current location.
1.
Select a category type.
u You can also confirm your current location, address, and nearest intersection.
2.
Select a place.
3.
Select Go!
.
4.
Select an item.
The following options are available:
• Start New Route : Sets the location as your new destination.
• Add to Active Route : Sets the location as the first waypoint.
2
uu Searching Near Establishment
95
uu Entering a New Destination
Entering a New Destination
H
HOME u Where To?
Enter a new destination using the Destination menu screen even when you are en route.
1.
Select a search method to enter a new destination.
2
2.
Select a place and then Select Go!
.
3.
Select an item.
96
The following options are available:
• Start New Route : Sets the location as your new destination.
• Add to Active Route : Sets the location as the first waypoint.
2
uu Entering a New Destination from Trip Planner
Entering a New Destination from Trip Planner
You can use the trip planner to create and save a route with multiple destinations.
■
Creating Your Route
H
HOME u u u New Trip u
Location
1.
Select a method to enter a new destination.
2
2.
Select Select .
3.
Select to add additional locations.
u Repeat step 1 and 2 to search the destination.
u Select and move the order of destinations.
u Select to delete unwanted destinations.
4.
Select Next .
Continued 97
98 uu Entering a New Destination from Trip Planner
5.
Enter a route name.
6.
Select Done .
1
Select to display the Edit Trip screen.
2
7.
Select Go!
.
u Select Map to display the destination and waypoints on the map screen.
2
8.
Select next destination from the list.
9.
Select Start .
u The route is automatically recalculated and displayed on the map screen.
uu Entering a New Destination from Trip Planner
■
Using the Saved Route
H
HOME u u u
1.
Select a saved route.
2.
Select Go!
.
3.
Select next destination from the list.
4.
Select Start .
u The route is automatically recalculated and displayed on the map screen.
■
Editing the Saved Route
H
HOME u u u
1.
Select a saved route you want to edit.
2.
Select .
Continued 99
100 uu Entering a New Destination from Trip Planner
3.
Select an item.
The following options are available:
• Edit Destinations : Edits the destination list of the saved trip.
2
• Delete Trip : Deletes a saved trip.
• Rename Trip : Enters a new name for the saved trip.
• Optimise Order : Automatically orders the waypoints in the destination list.
2
Reorder Your Destination List Automatically P. 91
• Route Preference : Changes the route preferences (calculating method).
2
Recalculate Using Another Route Preference P. 92
Other Features
This section describes the useful functions incorporated into the navigation system.
About Apps Menu ................................ 102
ecoRoute TM ............................................ 103
Setting Up the Vehicle Profile ............... 104
Viewing the Vehicle Profile ................... 106
Calibrating the Fuel Economy ............... 107
Viewing the ecoChallenge Scores ......... 108
Viewing Fuel Economy Information ...... 109
Viewing a Mileage Report .................... 110
Information Functions .......................... 111
Help ..................................................... 111
Where I've Been ................................... 112
Calculator ............................................ 113
Unit Converter ..................................... 114
GPS Information................................... 115
101
About Apps Menu
H
HOME u Apps
Display the useful functions incorporated into the navigation system.
Select an item.
102
The following items are available:
• Help : Displays the Help function.
2
• ecoRoute TM : Displays fuel economy information, mileage report, your driving habit and vehicle information.
2
• Trip Planner : Sets the trip planner to create and save a trip with multiple destinations.
2
Editing the Destination List P. 89
2
Entering a New Destination from Trip Planner P. 97
• Where I've Been : Displays your previous routes and places you have stopped on the map.
2
• Calculator : Displays the Calculator function.
2
• Unit Converter : Displays the Unit Converter function.
2
ecoRoute
TM
H
HOME u u u TM
The ecoRoute TM feature calculates the fuel economy and the fuel price of navigating to a destination, and offers tools for improving fuel efficiency.
The data provided by the ecoRoute feature is an estimate only.
To receive more-accurate fuel reports for your specific vehicle and driving habits, calibrate the fuel economy.
Select an item.
The following items are available:
• At The Pump : Calibrates the fuel economy to receive more-accurate fuel reports.
2
Calibrating the Fuel Economy P. 107
• ecoChallenge : Helps you maximize the vehicle fuel economy by scoring your driving habits.
2
Viewing the ecoChallenge Scores P. 108
• Fuel Economy : Displays fuel economy information.
2
Viewing Fuel Economy Information P. 109
• Vehicle Profile : Checks or reset your vehicle information.
2
Viewing the Vehicle Profile P. 106
• Mileage Report : Displays mileage reports for your vehicle.
2
Viewing a Mileage Report P. 110
103
104 uu TM Setting Up the Vehicle Profile
Setting Up the Vehicle Profile
H
HOME u u u TM
The first time you use the ecoRoute features, you must enter vehicle information.
1.
Select Yes .
2.
Select a fuel type.
3.
Select Next .
4.
Enter the fuel information of cities.
5.
Select Next .
uu TM Setting Up the Vehicle Profile
6.
Enter the fuel information of motorways.
7.
Select Next .
8.
Enter the fuel price.
9.
Select Next .
u The confirmation message will appear.
10.
Select OK .
105
106 uu TM Viewing the Vehicle Profile
Viewing the Vehicle Profile
H
HOME u u u TM
Select Vehicle Profile .
u If you reset the Vehicle Profile , select Reset .
Calibrating the Fuel Economy
H
HOME u u u TM At The Pump
You can calibrate the fuel economy to receive more-accurate fuel reports for your specific vehicle and driving habits. You should calibrate when you fill up your fuel tank.
1.
Enter the current fuel price.
2.
Enter the amount of fuel the vehicle has used since the last time the fuel tank was filled.
3.
Enter the distance you have travelled since the last time the fuel tank was filled.
4.
Select Next .
u The device calculates the average vehicle fuel economy.
5.
Select Save .
uu TM Calibrating the Fuel Economy
107
uu TM Viewing the ecoChallenge Scores
Viewing the ecoChallenge Scores
H
HOME u u u TM ecoChallenge
The ecoChallenge feature helps you maximize the vehicle fuel economy by scoring your driving habits. The higher your ecoChallenge scores, the more fuel you have saved. The ecoChallenge collects data and calculates a score whenever your device is moving and in Automobile transportation mode.
1
Viewing the ecoChallenge Scores
If you reset the ecoChallenge Scores, select and then select Reset .
108
The following information is displayed:
• Current : Displays the score for your current driving activity.
• Overall : Displays an average of the speed, acceleration, and braking score.
• Speed : Displays your score for driving your vehicle at the optimal speed for conserving fuel (45–60 mph for most vehicles).
• Acceleration : Displays your score for smooth and gradual acceleration. You lose points for rapid acceleration.
• Braking : Displays your score for smooth and gradual braking. You lose points for hard braking.
uu TM Viewing Fuel Economy Information
Viewing Fuel Economy Information
H
HOME u u u TM Fuel Economy
You can view your fuel consumption, your total fuel cost, and your average fuel economy.
Select a section of the graph to zoom in.
1
Viewing Fuel Economy Information
If you reset the Fuel Economy information, select
and then select Reset .
109
110 uu TM Viewing a Mileage Report
Viewing a Mileage Report
H
HOME u u u TM Mileage Report
You can view saved mileage reports on the device.
Select a report.
1
Mileage Reports
Mileage reports provide the distance, the time, the average fuel economy, and the fuel cost of navigating to a destination.
A mileage report is created for every route that you drive. If you stop a route on the device, a mileage report is created for the distance you travelled.
Information Functions
Help
H
HOME u u u
Select a help topic you want to display.
1
You can also display the help topic to select on each menu screen.
■
Searching Help Topics
H
HOME u u u u
1.
Enter a keyword. Select Done .
Continued 111
112 uu Where I've Been
2.
Select a help topic you want to confirm.
Where I've Been
H
HOME u u u
Before you can use this feature, you must enable the travel history feature. You can view your previous routes and places you have stopped on the map.
1
If you want to delete the recorded information, select
and then select Clear Travel History .
Calculator
H
HOME u u u
Enter a numeric value to calculate.
uu Calculator
113
114 uu Unit Converter
Unit Converter
H
HOME u u u
1.
If necessary, Select a measurement category (e.g., Distance ).
u Select a measurement category from the list. Select Save .
2.
If necessary, Select a unit of measurement (e.g., km ).
u Select a unit of measurement from the list. Select Save .
3.
Enter a numeric value to convert
(e.g., 1000). Select Done .
GPS Information
H
HOME u
The GPS info screen displays the satellites status.
Select and hold the .
u The picture on the left shows status of each GPS satellite.
u A solid bar indicates that the GPS satellite is ready for use.
uu GPS Information
115
116
Troubleshooting
Troubleshooting ................................... 118
Map, Voice, Entering Destinations ........ 118
Traffic .................................................. 119
Guidance, Routing ............................... 120
Update, Coverage, Map Errors ............. 121
Display, Accessories.............................. 121
Miscellaneous Questions ...................... 122
117
118
Troubleshooting
Map, Voice, Entering Destinations
Problem
The Startup Confirmation screen is displayed every time I start the car.
The navigation system reboots by itself (returns to the opening screen).
How do I specify a destination when an entered town or street could not be found?
How do I delete saved places?
I cannot hear the navigation system voice.
Solution
This is normal. The Startup Confirmation screen reminds you and your guest drivers to always operate the navigation system in a safe manner. If you do not select OK , the screen will become completely black after 30 seconds.
A reboot can be caused by extreme temperatures or shock from bumpy roads, and does not necessarily indicate a problem. If this happens frequently, please see your dealer.
Try selecting the destination directly from the map.
2
1.
Press the HOME button. Select Navigation > Where To?
> Favourite(s) >
> Delete Favourite(s) .
2.
Select saved places you want to delete.
3.
Select Delete .
4.
Select Yes .
1.
Press the HOME button. Select Navigation > Settings > Navigation and set
Voice Prompts to on.
2
2.
Press the HOME button. Select Settings > System > Sound/Beep tab and check that Volume is not set to 0.
uu Traffic
Traffic
Problem
Traffic information is missing or is not displaying properly. What is wrong?
Solution
Verify the following:
● Traffic information relies on a clear signal. If signal strength is low, traffic data may not be available.
●
●
Check that the traffic icons are turned on.
2
Traffic Information (For applicable countries) P. 84
It is possible that there is a temporary technical problem with your metropolitan
●
● area traffic. You can call Honda Automobile Customer Service to see if there is an outage.
2
Honda Automobile Customer Service Contact Information P. 127
If the situation persists, see your Honda dealer for assistance.
Traffic information is available only in certain areas.
119
120 uu Guidance, Routing
Guidance, Routing
Problem
The navigation system does not route me the same way I would go or the same way as other mapping systems.
Solution
The navigation system attempts to generate the optimal route. You can change the route preferences used when calculating a route.
2
Recalculate Using Another Route Preference P. 92
The street I’m on is not shown on the map screen. The mapping database is constantly undergoing revision. You can access the most recent information on the Internet.
2
The vehicle position icon is not following the road and the “GPS icon” text in the upper left hand corner of the screen is white or missing.
●
●
Check that the GPS antenna (located in the dashboard) is not blocked. For best reception, remove items from the dashboard, such as radar detectors, cellular phones, or loose articles.
Metallic tinting or other aftermarket devices can interfere with the GPS reception.
Please consult your dealer.
2
How do I stop the map from rotating as I drive along?
1.
Press the HOME button. Select Navigation > Settings > Map & Vehicle >
Driving Map View and check that Driving Map View is set to Track Up or 3-D .
2.
Select North Up .
3.
Select Save .
“Arrival time” is based on the speed limit on each road. Depending on the traffic conditions, the “arrival time” may be calculated to be earlier or later.
The “arrive time” display sometimes increases even though I am getting closer to my destination.
My elevation (shown when I display the current position) seems to fluctuate even though my elevation has not changed.
My elevation is missing on the “current position” screen.
This is normal. The elevation can vary ±30 m due to GPS calculation errors.
2
The elevation is only displayed if the GPS antenna can receive signals from at least four satellites. Try moving the vehicle into an open area. The elevation is also not displayed if the calculated elevation is zero or below sea level.
uu Update, Coverage, Map Errors
Update, Coverage, Map Errors
Problem Solution
My town is not part of a fully verified detailed coverage area.
The mapping database is constantly undergoing revision. You can access the most recent information on the Internet.
2
Does the navigation system work outside Europe?
The navigation system contains maps for Europe. The navigation system will not work in other countries.
2
Display, Accessories
Problem
The display appears dim when starting the car in really cold weather.
Solution
This is normal. The display will become brighter after a few minutes.
121
122 uu Miscellaneous Questions
Miscellaneous Questions
Problem
My clock frequently changes forward and backward by one hour.
My battery was disconnected or went dead, and the navigation system is asking for a code.
How do I change the interface language?
The clock setting is automatically updated based on your GPS location.
2
Solution
Press and hold the (Audio Power) button for two seconds. The system should reactivate. If you have installed an aftermarket system, see your dealer.
2
Entering the Security Code P. 124
Press the HOME button. Select Settings > System > Others tab > Language and select the desired language for system language.
See the owner’s manual.
Reference Information
System Initialization ..............................124
Entering the Security Code....................124
Startup Confirmation Screen .................124
System Limitations ................................125
GPS System...........................................125
Address Calculation ..............................125
Database ..............................................125
Customer Assistance .............................127
Resolving Problems ...............................127
Honda Automobile Customer Service
Contact Information............................127
Visiting Your Dealer ..............................127
Map Coverage ......................................127
Obtaining a Navigation Update .............127
Traffic Information ............................... 127
Legal Information ................................. 128
User Agreement ................................... 128
123
124
System Initialization
The navigation system must be initialized if power to the navigation system is interrupted for any reason (e.g., the battery was disconnected).
Entering the Security Code
You can find out about your serial number and security code from a dealer.
1.
Set the power mode to ON, and turn on the system.
2.
Press and hold the system power button for more than two seconds.
u The system is reactivated when the system control unit establishes a connection with the vehicle control unit. If the control unit fails to recognise the system unit, you must go to a dealer and have the system unit checked.
Startup Confirmation
Screen
The Startup Confirmation screen is displayed when initialization has successfully completed. It is displayed every time you start your vehicle. Select OK to continue.
System Limitations
GPS System
The signals received from the GPS satellites are extremely weak (less than a millionth of the strength of a local FM station) and require an unobstructed view of the sky.
The GPS antenna is located in the dashboard. The signal reception can easily be interrupted or interfered with by the following:
• Metallic window tint on the front or side windows
• Cellular phones, PDAs, or other electronic devices docked in a cradle or lying loose on the dashboard
• Remote starters or “hidden” vehicle tracking systems mounted near the navigation unit
• Audio electronic devices mounted near the navigation unit
• Trees, tall buildings, motorway overpasses, tunnels, or overhead electrical power wires
The GPS is operated by the U.S. Department of Defense. For security reasons, there are certain inaccuracies built into the GPS for which the navigation system must constantly compensate. This can cause occasional positioning errors of up to several hundred metres.
Database
The digitized map database reflects conditions as they existed at various points in time before production. Accordingly, your database may contain inaccurate or incomplete data or information due to the passage of time, road construction, changing conditions, or other causes.
Address Calculation
The destination icon shows only the approximate location of a destination address. This occurs if the number of possible addresses is different from the number of actual addresses on a block. For example, the address 1425 on a 1400 block with 100 possible addresses (because it is followed by the 1500 block) will be shown a quarter of the way down the block by the system. If there are only 25 actual addresses on the block, the actual location of address
1425 would be at the end of the block.
For example, some places/landmarks may be missing when you search the database because the name was misspelled, the place was improperly categorized, or a place/ landmark is not yet in the database. This is also true for police stations, hospitals, and other public institutions. Do not rely on the navigation system if you need law enforcement or hospital services. Always check with local information sources.
Continued 125
126 uu Database
The database does not include, analyze, process, consider, or reflect any of the following categories of information:
• Neighbourhood quality or safety
• Population density
• Availability or proximity of law enforcement
• Emergency, rescue, medical, or other assistance
• Construction work, zones, or hazards
• Road and lane closures
• Legal restrictions (such as vehicular type, weight, load, height, and speed restrictions)
• Road slope or grade
• Bridge height, width, weight, or other limits
• Traffic facilities safety
• Special events
• Pavement characteristics or conditions
We assume no liability for any incident that may result from an error in the program, or from changed conditions not noted above.
Every effort has been made to verify that the database is accurate. The number of inaccuracies you experience increases the longer you go without obtaining an updated map database.
2
Obtaining a Navigation Update P. 127
Customer Assistance
Resolving Problems
If you run into a specific issue that you cannot resolve, consult the following help resources:
• For navigation system issues:
2
Or, please contact your dealer.
• For traffic-related issues:
2
• Call Honda Automobile Customer
Service.
Honda Automobile
Customer Service Contact
Information
Please contact your dealer.
Visiting Your Dealer
If you have a question that you cannot resolve using the available help resources, you can consult your dealer. Please identify the specific issue (e.g., error occurs when you enter a specific address, when driving on a certain road, or just when it’s cold) so that the service adviser can refer the issue to the factory so that a solution can be found.
Be patient, the service adviser may be unfamiliar with your specific issue.
Map Coverage
The navigation system provides map coverage for the European region.
Obtaining a Navigation
Update
Honda is continuously updating the navigation system.
Navigation system software is usually updated annually.
Please contact your Honda dealer for further information regarding the update program available for your vehicle.
Traffic Information
Continuously updated traffic information is available in major metropolitan areas.
127
Legal Information
128
User Agreement
■
END USER TERMS
The content provided (“Data”) is licensed, not sold. By opening this package, or installing, copying, or otherwise using the
Data, you agree to be bound by the terms of this agreement. If you do not agree to the terms of this agreement, you are not permitted to install, copy, use, resell or transfer the Data. If you wish to reject the terms of this agreement, and have not installed, copied, or used the Data, you must contact your retailer or HERE North
America, LLC (as defined below) within thirty (30) days of purchase for a refund of your purchase price. To contact HERE, please visit www.here.com.
The Data is provided for your personal, internal use only and may not be resold. It is protected by copyright, and is subject to the following terms (this “End User License
Agreement”) and conditions which are agreed to by you, on the one hand, and
HERE and its licensors (including their licensors and suppliers) on the other hand.
For purposes of these terms, “HERE” shall mean (a) HERE North America, LLC with respect to Data for the Americas and/or the
Asia Pacific region and (b) HERE Europe B.V. for Data for Europe, the Middle East and/or
Africa.
The Data includes certain information and related content provided under license to
HERE from third parties and is subject to the applicable supplier terms and copyright notices set forth at the following URL: http://corporate.navteq.com/ supplier_terms.html.
License Limitations on Transfer: Your limited license does not allow transfer or resale of the Data, except on the condition that you may transfer the Data and all accompanying materials on a permanent basis if: (a) you retain no copies of the Data;
(b) the recipient agrees to the terms of this
End User License Agreement; and (c) you transfer the Data in the exact same form as you purchased it by physically transferring the original media (e.g., the CD-ROM or
DVD you purchased), all original packaging, all Manuals and other documentation.
Specifically, Multidisc sets may only be transferred or sold as a complete set as provided to you and not as a subset thereof.
■
TERMS AND CONDITIONS
License Limitations on Use: You agree that your license to use this Data is limited to and conditioned on use for solely personal, noncommercial purposes, and not for service bureau, timesharing or other similar purposes. Except as otherwise set forth herein, you agree not to otherwise reproduce, copy, modify, decompile, disassemble or reverse engineer any portion of this Data, and may not transfer or distribute it in any form, for any purpose, except to the extent permitted by mandatory laws.
Additional License Limitations: Except where you have been specifically licensed to do so by HERE in a separate written agreement, and without limiting the preceding paragraph, your license is conditioned on use of the Data as prescribed in this agreement, and you may not (a) use this Data with any products, systems, or applications installed or otherwise connected to or in communication with vehicles capable of vehicle navigation, positioning, dispatch,
uu User Agreement real time route guidance, fleet management or similar applications; or (b) with, or in communication with, including without limitation, cellular phones, palmtop and handheld computers, pagers, and personal digital -assistants or PDAs.
Warning: This Data may contain inaccurate or incomplete information due to the passage of time, changing circumstances, sources used and the nature of collecting comprehensive geographic Data, any of which may lead to incorrect results.
Disclaimer of Warranty: HERE AND ITS
LICENSORS (INCLUDING THEIR LICENSORS
AND SUPPLIERS) DISCLAIM ANY
WARRANTIES, EXPRESS OR IMPLIED, OF
QUALITY, PERFORMANCE,
MERCHANTABILITY, FITNESS FOR A
PARTICULAR PURPOSE OR NON-
INFRINGEMENT. Some States, Territories and Countries do not allow certain warranty exclusions, so to that extent the above exclusion may not apply to you.
CONDITIONS, WHETHER IN AN ACTION IN
CONTRACT OR TORT OR BASED ON A
WARRANTY, EVEN IF HERE OR ITS
LICENSORS HAVE BEEN ADVISED OF THE
POSSIBILITY OF SUCH DAMAGES. Some
States, Territories and Countries do not allow certain liability exclusions or damages limitations, so to that extent the above may not apply to you.
No Warranty: This Data is provided to you
“as is”, and you agree to use it at your own risk. HERE and its licensors (and their licensors and suppliers) make no guarantees, representations or warranties of any kind, express or implied, arising by law or otherwise, including but not limited to, content, quality, accuracy, completeness, effectiveness, reliability, fitness for a particular purpose, usefulness, use or results to be obtained from this Data, or that the Data or server will be uninterrupted or error free.
Disclaimer of Liability: HERE AND ITS
LICENSORS (INCLUDING THEIR LICENSORS
AND SUPPLIERS) SHALL NOT BE LIABLE TO
YOU IN RESPECT OF ANY CLAIM, DEMAND
OR ACTION, IRRESPECTIVE OF THE NATURE
OF THE CAUSE OF THE CLAIM, DEMAND
OR ACTION ALLEGING ANY LOSS, INJURY
OR DAMAGES, DIRECT OR INDIRECT,
WHICH MAY RESULT FROM THE USE OR
POSSESSION OF THIS DATA; OR FOR ANY
LOSS OF PROFIT, REVENUE, CONTRACTS
OR SAVINGS, OR ANY OTHER DIRECT,
INDIRECT, INCIDENTAL, SPECIAL OR
CONSEQUENTIAL DAMAGES ARISING OUT
OF YOUR USE OF OR INABILITY TO USE THIS
DATA, ANY DEFECT IN THIS DATA, OR THE
BREACH OF THESE TERMS OR
Export Control: You agree not to export from anywhere any part of the Data or any direct product thereof except in compliance with, and with all licenses and approvals required under, applicable export laws, rules and regulations, including but not limited to the laws, rules and regulations administered by the Office of Foreign Assets
Control of the U.S. Department of
Commerce and the Bureau of Industry and
Security of the U.S. Department of
Commerce. To the extent that any such export laws, rules or regulations prohibit
HERE from complying with any of its obligations hereunder to deliver or distribute Data, such failure shall be excused and shall not constitute a breach of this
Agreement.
Continued 129
uu User Agreement
130
Entire Agreement: These terms and conditions constitute the entire agreement between HERE (and its licensors, including their licensors and suppliers) and you pertaining to the subject matter hereof, and supersedes in their entirety any and all written or oral agreements previously existing between us with respect to such subject matter.
(“Claims”), you agree to submit to the personal jurisdiction of (a) the State of
Illinois for Claims related to Data for the
Americas and/or the Asia Pacific region provided to you hereunder, and (b) The
Netherlands for Data for Europe, the Middle
East and/or Africa provided to you hereunder.
Severability: effect.
You and HERE agree that if any portion of this agreement is found illegal or unenforceable, that portion shall be severed and the remainder of the
Agreement shall be given full force and
Governing Law: The above terms and conditions shall be governed by the laws of the State of Illinois (for Data for the
Americas and/or the Asia Pacific region) or
The Netherlands (for Data for Europe, the
Middle East and Africa), without giving effect to (i) its conflict of laws provisions, or
(ii) the United Nations Convention for
Contracts for the International Sale of
Goods, which is explicitly excluded. For any and all disputes, claims and actions arising from or in connection with the Data
Government End Users: If the Data is being acquired by or on behalf of the
United States government or any other entity seeking or applying rights similar to those customarily claimed by the United
States government, this Data is a
“commercial item” as that term is defined at 48 C.F.R. (“FAR”) 2.101, is licensed in accordance with this End User License
Agreement, and each copy of Data delivered or otherwise furnished shall be marked and embedded as appropriate with the following “Notice of Use”, and be treated in accordance with such Notice:
NOTICE OF USE
CONTRACTOR (MANUFACTURER/
SUPPLIER) NAME:
HERE
CONTRACTOR (MANUFACTURER/
SUPPLIER) ADDRESS:
425 West Randolph Street, Chicago, IL
60606.
This Data is a commercial item as defined in
FAR 2.101 and is subject to the End User
License Agreement under which this Data was provided.
© 1987-2013 HERE. All rights reserved.
If the Contracting Officer, federal government agency, or any federal official refuses to use the legend provided herein, the Contracting Officer, federal government agency, or any federal official must notify HERE prior to seeking additional or alternative rights in the Data.
© 1987-2013 HERE. All rights reserved.
Numbers
3D Map
....................................................... 30
A
Adding Waypoints
..................................... 88
Apps Menu
............................................... 102
Avoidances ................................................. 38
C
Index
Index
Symbols a
(Display Mode) Button
9
(Power) Button ....................................... 3
Calculating the Route ................................ 72
Calculation Mode
....................................... 37
Cancel Route .............................................. 10
Changing Your Destination
Changing Your Route ................................ 86
Custom Avoidances
.................................... 39
Customer Assistance ................................ 127
D
Dashboards ................................................. 34
Data Reset
.................................................. 54
Device
......................................................... 52
Display Mode ............................................. 26
Driving to Your Destination
I
E ecoRoute
TM ................................................ 103
Editing the Destination List
Entering a Destination
............................... 56
Address ..................................................... 60
Categories ................................................. 65
Favourites .................................................. 70
History....................................................... 70
HONDA ..................................................... 59
Map Input ................................................. 71
Entering a New Destination ...................... 96
F
Favourites .................................................... 20
Deleting .............................................. 24, 25
Editing....................................................... 22
Saving ................................................. 20, 21
G
Go Home
....................................................... 8
H
Home ........................................................... 18
HOME Screen
................................................ 3
Honda Customer Service
.......................... 127
Information Functions
.............................. 111
L
Language & Keyboard ............................... 49
Legal Information .................................... 128
M
Map & Vehicle ............................................ 28
Map Buttons
............................................... 33
Map Detail
.................................................. 31
Map Layers .................................................. 34
Map Legend
.................................................. 6
Map Menu .................................................. 80
Map Operation
........................................... 79
Map Screen ................................................. 75
Icon............................................................. 6
Map Theme ................................................. 32
Map Update
Obtaining Update Data ........................... 127
myMaps ....................................................... 35
N
Navigation .................................................. 36
Navigation App
............................................ 3
Navigation Menu Screen ............................. 3
North Up
..................................................... 30
O
Other Settings ............................................ 46
131
132
P
Personal Information .................................. 17
Update System Software
Obtaining Update Data ........................... 127
S
Security Code ............................................ 124
Setting
Data Reset ................................................. 54
Device ....................................................... 52
Display Mode Settings ............................... 26
Language & Keyboard ............................... 49
Map & Vehicle ........................................... 28
Navigation ................................................. 36
Other Settings ........................................... 46
Personal Information.................................. 17
Traffic........................................................ 45
System Initialization
................................. 124
System Limitations .................................... 125
V
Vehicle
........................................................ 29
T
Track Up
...................................................... 30
Traffic .......................................................... 45
Indicator ...................................................... 6
Setting....................................................... 45
Traffic Information..................................... 84
Troubleshooting
................................. 11, 118
U
Units & Time
advertisement