Honda Civic 5 Door & Type-R 21YM Owner Manual 133 Pages
advertisement
The information and specifications included in this publication were in effect at the time of approval for printing. Honda Motor Co., Ltd., reserves the right, however, to discontinue or change specifications or design at any time without notice and without incurring any obligation.
Accessories Precautions
The GPS antenna is located in the dashboard. Metallic front or side window tinting can seriously degrade or obstruct GPS reception.
Signal noise from devices such as radar detectors, vehicle tracking devices, remote starters, and additional amplifiers can disrupt the navigation system. If you install any such item, install it away from the navigation display and antenna.
Important Safety Information
3
WARNING
Using the navigation system while driving can take your attention away from the road, causing a crash in which you could be seriously injured or killed.
Only operate system controls when the conditions permit you to safely do so.
Avoid focusing on the screen or manually operating the system controls while driving.
Certain on-screen controls are disabled when driving. Pull to the side of the road if you need to devote more attention and time to look at the screen or access additional menus.
Route guidance may conflict with street closures, road construction, detours, and out-of-date map data.
The system itself may also have limitations. Verify route information by carefully observing roads, signs, and signals. Always use your own judgment and obey traffic laws.
2
NOTICE
Clean the screen with a soft, damp cloth. You may use a mild cleaner intended for use on navigation screens.
2
2
2
2
2
Driving to Your Destination 76
Contents
2
Quick Reference Guide
Overview—Functions at a Glance
Navigation
You can select any place/landmark as a destination by using the touchscreen. The navigation system gives you turn-by-turn driving directions to your destination.
Store home address
Register
1
home address.
Store contacts
Store locations to use as the destination.
Enter destination
Select your destination using several methods.
Select route
Set route preferences and select one of the available routes.
Track route
Follow your route in real-time with voice guidance.
Traffic Information *
View and avoid congestion and traffic incidents.
*: Available only in certain areas.
Avoid certain areas
Set streets and areas to detour around.
Add waypoints
Add “pit stops” along your route.
HOME Screen
The system displays various functions from the HOME screen. Press the button at any time to return to the main HOME screen.
(Display Mode)
Switch between Day and Night modes manually.
Display the map menu.
(Home)
Display the HOME screen.
(Map)
Display the map screen.
(Back)
Go back to the previous screen.
VOL (Volume)
Increase or decrease the audio volume.
Navigation
Display the navigation feature that was used the last time.
At start-up, the navigation top screen is displayed.
Navigation Top Screen
Display the map screen and operate the navigation features. From the HOME screen, press the button and then press the button. The navigation top screen is displayed.
GPS signal strength
Display the satellites' status.
Where To?
Select search methods to enter a destination for route guidance.
Apps
Display the useful functions incorporated into the navigation system.
View Map
Display the map screen.
Settings
Change the settings for the navigation functions.
3
Touchscreen Operation
You can operate the system using your finger on the touchscreen.
The touchscreen can be operated if you are wearing thin gloves, but it may be more difficult for the system to respond.
Tap
Touch the screen lightly with your finger to select an option on the screen.
Slide
Move your finger slowly across the screen to scroll the map.
Swipe
Lightly sweep your finger side to side or up and down to scroll a list or map.
Pinch In/Out
Open or close your fingers on the screen in a pinching motion to zoom in or out of the map.
4
You can change the touchscreen sensitivity setting.
2 Refer to the Owners Manual.
How to Enter Information
You can enter information (e.g., town names, street names, numbers, and symbols) when prompted on the input screen.
Using the Touchscreen
Select a character or icon on the screen to select it.
Select to remove the last entered character.
Select to remove all entered characters.
Select to display upper/lower case characters.
Select to enter a space character.
Select to display other types of characters.
Select to change the keypad language.
Help
This navigation system comes with help information, which tells you how to use this navigation.
a Press the button and then press the button.
b Press the button.
c Select Apps .
d Select Help .
e Select a help topic.
On input search screens, the suggested search terms are displayed.
Select to display a list of possible entries.
Select to search help topics by keyword.
You can also display a help topic to select on each menu screen.
5
6
Map Screen Legend
The colour of the map is different depending on the selected Map Theme.
Map scale
Searching specific category
Map operation icons
Traffic incident icons
Streets
Current vehicle position
Feature areas
Place/landmark icons
Map buttons
Traffic flow indicator
Traffic is flowing normally.
Traffic is slightly congested.
Traffic is heavily congested or stopped.
Traffic has not updated.
Map menu
During Route Guidance
During route guidance, route information is displayed on the map screen.
You can see the detailed information on the turn information screen.
Map Screen
Next guidance indicator
Distance to the next guidance point and street name of next guidance point.
Waypoint
Where To?
Cancel route
Speed limit
Guidance Screen
Street name of next guidance point
Scrolls key
Select this key to scroll the display.
Estimated time to next guidance point
Calculated route
Dashboards
Distance to next guidance point
Day or Night Mode
Press the button to manually switch between Day and Night modes.
Day Mode Night Mode
Turn-by-Turn Directions
The next guidance point appears on the Driver Information Interface (DII).
Remaining distance
Street name of next guidance point
Next driving manoeuvre is approaching.
7
8
Navigation—Home Addresses and Going Home
The “Home” feature automatically routes you to your home address from any location simply by selecting Go Home .
You can store one home address.
The order of the steps may change depending on the map data loaded on your system.
Storing Your Home Address Going Home
e Select Search All .
a Press the button.
b Select .
a Press the button.
b Select .
c Select and then select Set
Home Location .
c Select Go Home .
f Enter a house number and then select
Done .
g Enter a street and then select Done .
h Select a street from the list.
d Select Enter My Address .
If the select town screen is displayed, select a town.
i Select an address from the list.
j Select Select .
Navigation—Entering a Destination
Enter your destination using one of several methods, then follow route guidance on the map to your destination.
The order of the steps may change depending on the map data loaded on your system.
a Press the button.
b Select .
c Select Address .
f Enter the name of your destination street and select Done .
i Select Go!
.
Route guidance to the destination begins.
g Select your destination street from the list.
Routes : Choose one of multiple routes.
d Select Search All .
e Enter the house number and select
Done if necessary.
If the select town screen is displayed, select a town.
h Select an address from the list.
: Display your destination map and save a place.
9
10
Navigation—Changing Route or Destination
You can alter your route by adding waypoints to visit, or changing your destination during route guidance.
Adding a Waypoint (“Pit Stop”)
You can add waypoints along your route.
a Press the button.
b Select .
c Select a search method.
d Select the location to add to the destination list and select Go!
.
e Select Add to Active Route .
f If necessary, edit the order of the destinations and select Done .
Changing Your Destination
There are several methods you can use to specify a new destination during route guidance.
Searching nearby hospitals, police stations, or petrol stations
Select the vehicle icon and select an option.
Selecting an icon on the map
Select a place/landmark icon or a new area on the map twice.
Entering a new destination
Select Where To?
and then enter a new destination.
Canceling Your Route
a Select .
Troubleshooting
Why does the vehicle position icon on the map appear slightly off my actual position, especially at junctions?
This is normal. The navigation system is unaware of the width of junctions. Large differences in vehicle position can indicate a temporary loss of the GPS signal.
Why does the “Arrival time” display sometimes increase even though I am getting closer to my destination?
The “Arrival time” is based on the speed limit on each road. Depending on the traffic conditions, the “Arrival time” may be calculated to be earlier or later.
Why does my clock frequently change the time forward and backward by one hour?
The clock setting is automatically updated based on your
GPS location. If you are driving near a time zone border, the automatic update likely is the reason.
For more Information
How do I turn on the navigation system voice guidance?
1.
Press the button.
Select Settings > System > Sound/Beep tab.
Turn up Guidance Volume , if guidance volume is low.
For more details, see the Owner’s Manual.
2.
Press the button and then press the button.
Select Settings > Navigation .
Check that Voice Prompts is not set to off.
How do I specify a destination when an entered town or street could not be found?
Try selecting the destination directly from the map.
11
How to Use This Manual
This section explains different methods on how you can easily find information in this manual.
12
Searching the Table of Contents
Two types of Tables of Contents help you find your desired information.
More Detailed
Contents
Table of Contents
First, find the general chapter related to what you are looking for (e.g., entering a destination from the Favourites).
Then, go to that chapter to view a more specific table of contents.
Chapter Contents
This more detailed table of contents shows you exactly what information is listed by section and title.
Searching the Index
Menu items displayed on the navigation screen (e.g., Favourites ) can be found individually in the Index.
Navigation Screen
Index
The Index consists of main terms and subentries. The sub-entries help you get to the desired page depending on what you are looking for.
Go to the
Next Page
After following the menu tree, step-by-step instructions explain how to achieve the desired result.
Menu Tree
The menu tree helps guide you through the system’s menu options.
To get to your desired function, follow the menu tree in order of the steps shown.
Favourites
Select the item on the system control panel.
* Sample pages and images in this section may differ from the actual ones.
Select the menu option.
Select Favourites .
13
14
System Setup
This section describes the start-up procedure and the navigation and setup functions.
Start-up ....................................................16
Personal Information ...............................17
Setting Home Location............................17
Favourites Locations ................................18
Display Mode Settings ............................25
Switching Display Mode Manually ...........25
Map & Vehicle ..........................................27
Vehicle....................................................28
Driving Map View (Map Orientation) .......29
Map Detail ..............................................30
Map Theme ............................................31
Map Buttons ...........................................32
Map Layers .............................................33
Dashboards.............................................33
myMaps ................................................. 34
Navigation ............................................... 35
Calculation Mode................................... 36
Avoidances ............................................ 37
Custom Avoidances ............................... 38
Traffic ....................................................... 43
Other Settings ......................................... 44
Units ...................................................... 44
Language & Keyboard ............................ 45
Device .................................................... 48
Data Reset ............................................... 50
Reset Factory Default Settings ................ 50
15
16
Start-up
The navigation system starts automatically when you set the power mode to
ACCESSORY or ON. At start-up, the following confirmation screen is displayed.
1.
Select OK .
u The HOME screen is displayed.
u If you do not select OK within
30 seconds, a black screen or clock will be displayed.
Touch the screen to display the message again.
u The system will automatically start up the feature that was used the last time.
2.
Press the button.
u The map screen is displayed.
u When you want to display the navigation top screen, you press the button.
1
Avoid focusing on the screen and drive safely following the actual traffic restrictions.
When you use the navigation system, the system may close other apps.
When you select Navigation , the system displays the navigation feature that was used the last time. At start-up, the navigation top screen is displayed.
■
Limitations for Manual Operation
Certain manual functions are disabled or inoperable while the vehicle is in motion.
You cannot select a grayed-out option until the vehicle is stopped.
Personal Information
Setting Home Location
H u u
Use the personal information menu to set your home location.
1.
Select Set Home Location .
1
You can also display the same screen by selecting on the Where To?
screen.
If you want to delete a shortcut(s), select Remove
Shortcut(s) .
2
The home location can be overwritten.
2.
Select an option.
u Select Use My Current
Location to set home location.
u Select Enter My Address or
Choose from Recently
Found , proceed to steps 3 and
4.
3.
Select the home location.
4.
Select Select .
The following options are available:
• Enter My Address : Sets the home location by entering the address.
2
Storing Your Home Address P. 8
• Use My Current Location : Sets your current location as your home location.
• Choose from Recently Found : Sets the home location from a recently found location.
17
18 uu Favourites Locations
Favourites Locations
You can save locations so you can quickly find them and create routes to them.
■
Saving a Favourites Location
H u
1.
Select a search method.
u Find a location that you want to save.
2
2.
Select .
3.
Select or select .
4.
Select Save .
u If necessary, enter a name and select Done .
5.
Select OK .
■
Saving a Favourites Location Manually
H
u u
1.
Select a destination from the map.
2
2.
Select the destination name at the bottom of the map.
3.
Select or select .
4.
Select Save .
u On some places other than POI, you can edit the place name.
5.
Select OK .
uu Favourites Locations
Continued 19
20 uu Favourites Locations
■
Saving Your Current Location
H
u u
1.
Select the vehicle icon.
2.
Select Save .
1
Vehicle position may not be displayed when:
• The vehicle is travelling off-road.
• The vehicle position data cannot be updated.
3.
Enter a name of the location.
4.
Select Done .
5.
Select OK .
■
Editing a Favourites Location
H
u u
1.
Select a favourites location you want to edit.
2.
Select .
3.
Select
4.
Select Edit .
or select .
uu Favourites Locations
Continued 21
22 uu Favourites Locations
5.
Select an option.
The following options are available:
• Name : Enters a new name for the location.
• Phone Number : Enters a phone number.
• Categories : Creates or changes the category in which this location is saved.
• Change Map Symbol : Select a new symbol.
■
Deleting a Favourites Location
H
u u
1.
Select a favourites location you want to delete.
2.
Select .
3.
Select or select .
4.
Select Delete .
5.
Select Yes .
uu Favourites Locations
Continued 23
24 uu Favourites Locations
■
Deleting Favourites Locations
H
u u
1.
Select or select .
2.
Select Delete Favourite(s) .
3.
Select a favourites location you want to delete.
u Select Select All to delete all favourites locations.
4.
Select Delete .
5.
Select Yes .
Display Mode Settings
Switching Display Mode Manually
Set the screen brightness separately for Day and Night modes. Press the button to cycle through the display modes (Day to Night to Off).
Press the button.
u The Brightness bar is displayed for a few seconds.
u Select or to adjust the brightness.
1
Switching Display Mode Manually
You can also adjust the display brightness by sliding or swiping on the Brightness bar.
You can change the touchscreen sensitivity setting.
2 Refer to the Owners Manual.
Continued 25
uu Switching Display Mode Manually
26
Illumination control
button
Operation
Selects Day or Night display mode when the user wants to change the brightness of the display temporarily.
Remember: This button overrides all other display brightness adjustments either set automatically by the sunlight sensor or manually from the System settings screen.
Sunlight sensor
(see your Owner’s
Manual for location)
If the sunlight sensor detects daylight and the headlights are turned on, the system automatically overrides the Night display and displays the Day display mode.
Remember: If desired, use the override this automatic choice.
button to
Dash illumination adjustment knob
(see your Owner’s
Manual for location)
When the headlights are turned on, and you wish to have the Day display mode, adjust the illumination to the full brightness (beeps).
Remember: Adjust the dash brightness back to midrange to allow auto switching by sensing the headlights are on or off.
Headlights
(Auto/On/Off)
When turned on, the display changes to Night display mode.
The previous three controls listed above can
“cancel” this function.
Remember: Use the button, or adjust the dash illumination to full brightness, to set the display to your desired choice.
Map & Vehicle
H
u u Map & Vehicle
Change the map settings.
Select an option.
The following options are available:
• Vehicle : Changes the icon to represent your position on the map.
2
• Driving Map View : Sets the perspective on the map.
2
Driving Map View (Map Orientation) P. 29
• Map Detail : Sets the level of detail on the map. More detail may cause the map to draw slower.
2
• Map theme : Changes the colour of the map data.
2
• Map Buttons : Sets which icons are included on the map. Up to three icons can be included on the map.
2
• Map Layers : Sets the data that appears on the map.
2
• Dashboards : Sets the map dashboard layout.
2
Continued 27
28 uu Vehicle
• Auto Zoom : Sets whether the map zooms automatically according to the distance of the next guidance point.
• myMaps : Sets which installed maps the system uses.
2
Vehicle
H
u u u u
You can choose your vehicle icon.
1.
Select an option.
2.
Select Save .
Driving Map View (Map Orientation)
H
u u u u
Select the map orientation.
1.
Select an option.
2.
Select Save .
The following options are available:
• Track Up : Displays the map with your direction of travel facing upwards.
• North Up : Displays the map with north always pointing up.
• 3-D (factory default): Displays the map in 3D with your direction of travel facing upwards.
uu Driving Map View (Map Orientation)
29
30 uu Map Detail
Map Detail
H
u u u u
Sets the level of detail on the map.
1.
Select an option.
2.
Select Save .
The following options are available:
• More : Shows more detail on the map.
• Normal (factory default): Shows a standard amount of detail on the map.
• Less : Shows less detail on the map.
Map Theme
H
u u u u
Changes the colour of the map data.
1.
Select an option.
2.
Select Save .
uu Map Theme
31
32 uu Map Buttons
Map Buttons
H
u u u u
Sets up to three shortcuts that appear in the map tools menu.
1.
Select if you want to delete a shortcut and then select OK .
2.
Select to add a new shortcut.
1
Reset to Defaults
Resets the settings to the factory defaults.
3.
Select an option.
4.
Select Save .
Map Layers
H
u u u Map & Vehicle u
Sets the data that appears on the map screen.
1.
Select an option(s).
2.
Select Save .
uu Map Layers
1
Trip Log is set to off as factory default.
Dashboards
H
u u u Map & Vehicle u
Switches the dashboard layout at the bottom of the map.
1.
Select or .
2.
Select Save .
33
34 uu myMaps
myMaps
H
u u u u
Sets which installed maps the system uses.
Select an option(s).
Navigation
H
u u Navigation
Changes the navigation settings.
The following options are available:
• Calculation Mode : Sets route preference.
2
• Avoidances : Sets road features to avoid on a route.
2
• Custom Avoidances : Allows you to avoid specific roads or areas.
2
• Advanced Detours : Sets the length of the detour.
• Voice Prompts : Turns the voice prompts on or off.
• GPS Simulator : Stops the system from receiving a GPS signal.
1
Advanced Detours and GPS Simulator are set to off as factory default.
35
36 uu Calculation Mode
Calculation Mode
H
u u u u
Sets the route preference.
1.
Select an option.
2.
Select Save .
The following options are available:
• Faster Time (factory default): Calculates routes that are faster to drive but can be longer in distance.
• Shorter Distance : Calculates routes that are shorter in distance but can take more time to drive.
• Less Fuel : Calculates routes that could use less fuel than other routes.
Avoidances
H
u u u u
Set preferences for route options to avoid.
1.
Select an option(s).
2.
Select Save .
uu Avoidances
1
Motorways , Tolls and Fees , and Ferries are set to off as factory default.
The following options are available:
• U-Turns : Avoids u-turns.
• Motorways : Avoids motorways.
• Tolls and Fees : Avoids toll roads.
• Ferries : Avoids ferries.
• Car Share Lanes: Avoids car share lanes.
• Unpaved Roads : Avoids unpaved roads.
37
38 uu Custom Avoidances
Custom Avoidances
H
u u u u
Allows you to avoid specific areas and sections of road. You can enable and disable custom avoidances as needed.
Select an option.
u Select Add New Custom
Avoidance if custom avoidances are already stored.
The following options are available:
• Add Avoid Area : Sets an area to avoid.
2
• Add Avoid Road : Sets a road to avoid.
2
■
Adding an Avoid Area
H
u u u u Add Avoid
Area
1.
Select the upper-left (right) corner of the area to avoid. Select Next .
u The icon is displayed on the map.
2.
Select the lower-right (left) corner of the area to avoid. Select Next .
u The selected area is shaded on the map.
3.
Select Done .
Continued uu Custom Avoidances
39
40 uu Custom Avoidances
■
Adding an Avoid Road
H
u u u u Add Avoid
Road
1.
Select the starting point of the section of road to avoid. Select
Next .
u The icon is displayed on the map.
2.
Select the ending point of the road section. Select Next .
u The selected road colour changes.
3.
Select Done .
■
Editing a Custom Avoidance
H
u u u u
1.
Select the area or road to edit from the list.
2.
Select .
u The menu screen is displayed.
3.
Select an item.
The following items are available:
• Rename : Enters a new name.
• Delete : Deletes a selected area or road.
• Disable : Disables the avoidance.
Continued uu Custom Avoidances
41
42 uu Custom Avoidances
■
Deleting Custom Avoidances
H
u u u u
1.
Select .
2.
Select options you want to delete.
u Select Select All for all options in the list.
3.
Select Delete .
1
Select if you want to search the saved custom avoidance.
Traffic
H
u u Traffic
Sets the traffic feature.
Select an option.
The following options are available:
• Traffic : Enables the traffic feature.
2
• Current Provider : Sets the traffic provider to use for traffic data.
• Subscriptions : Displays the lists of the current traffic subscriptions.
• Optimise Route : Sets whether to use optimised alternate routes On Request
(factory default) or Automatic .
43
44
Other Settings
Units
H
u u u u
You can set the map units.
1.
Select an option.
2.
Select Save .
The following options are available:
• Miles : Sets the units to miles.
• Kilometres : Sets the units to kilometres.
Language & Keyboard
H
u u Language & Keyboard
Set the language for the unit and the keyboard layout.
Select an option.
The following options are available:
• Voice Language : Sets the language for voice prompts.
2
• Keyboard Language : Sets the language for your keyboard.
2
• Keyboard Layout : Sets the keyboard layout.
2
uu Language & Keyboard
1
When you select a language for the audio system, the language setting of the navigation system is automatically switched.
See the Owner’s Manual for instructions.
Continued 45
46 uu Language & Keyboard
■
Voice Language
H
u u u u
1.
Select an option.
2.
Select Save .
■
Keyboard Language
H
u u u u
1.
Select an option.
2.
Select Save .
■
Keyboard Layout
H
u u u u
1.
Select an option.
2.
Select Save .
uu Language & Keyboard
47
48 uu Device
Device
H
u u Device
Select an option.
The following options are available:
• About : Displays the device information.
2
• Travel History : Allows the system to record information for suggested routes, previous routes and destinations, and Trip Log features.
• Clear Travel History : Deletes the recorded information.
• Update Map : Displays the description screen of map update.
2
Obtaining a Navigation Update P. 126
■
About
H
u u u u
Displays the device information.
uu Device
49
50
Data Reset
Reset Factory Default Settings
H
u u u
You can restore all settings to the factory default values.
1.
Select Restore .
2.
Select Yes .
1
Reset Factory Default Settings
When you want to reset the following options, see the below references:
• Home
2
Deleting Favourites Locations P. 24
• Recent
2
• Favourites
2
When you select or select in each settings category, you can restore the selected category.
When you transfer the vehicle to a third party, reset all settings to default and delete all personal data.
Navigation
This section describes how to enter a destination, select a route to take, and follow the route to your destination. It also describes how to change your route or destination along the way.
Entering a Destination ............................52
HONDA ..................................................58
Address ..................................................59
Categories ..............................................64
Favourites ...............................................70
History ....................................................71
Map Input...............................................72
Calculating the Route ..............................73
Viewing and Selecting the Routes ...........74
Viewing the Destination Map ..................75
Driving to Your Destination ...................76
Viewing the Route ..................................76
Map Operation ........................................ 80
Map Menu ............................................. 81
Traffic Information ..............................85
Changing Your Route ............................. 87
Stopping the Route ................................ 87
Taking a Detour ..................................... 88
Adding Waypoints ................................. 89
Changing Your Destination ................... 90
Selecting a Destination on the Map ........ 90
Searching Near Establishment ................ 91
Entering a New Destination .................... 93
Entering a New Destination from Trip
Planner................................................. 94
Editing the Destination List ..................... 98
51
52
Entering a Destination
H u
This section describes how to enter a destination for route guidance.
Select an option.
Shortcuts
The following options are available:
• Enter Search : Sets a destination by entering a category, name, address, or town name.
2
• Searching near : Selects the town to search near.
2
Changing the Search Area P. 55
• Go Home : Sets your home address as the destination.
2
• HONDA : Sets a nearby Honda dealer as the destination.
2
• Address : Sets a destination by entering an address.
2
1
The Display Audio system can only provide route guidance from one navigation system at a time.
When setting a destination on one system, any active route guidance with the other system is cancelled, and the system you are currently using will direct you to your destination.
If you press the button on the steering wheel and select Navi Menu while on the map screen, the following items are available. Use the steering wheel buttons to select the items.
• Go Home
• Recent Destination
• Change Route Pref.
• Saved Places
• Cancel Route
• Add New Address
Button
• Categories : Sets a destination by selecting a category.
2
• Favourites : Sets a destination by selecting a place stored in the Saved list.
2
• History : Sets a destination by selecting a previous destination.
2
• Personalise : Adds shortcuts to the Where To?
menu.
2
uu u
Continued 53
54 uu u
■
Using the Search Bar
H u u
You can use the search bar to search for locations by entering a category, name, address, company phone number, or town name.
1.
Enter a search term.
u The search history is displayed below the search bar.
u Suggested search terms appear below the search bar as you type.
2.
Select or suggested search term.
3.
Select your destination from the list.
4.
Select Go!
to set the route to your destination.
2
1
If you want to delete the search history, select
Restore in the settings menu.
2
Reset Factory Default Settings P. 50
uu u
■
Changing the Search Area
H u u
By default, your system finds locations closest to your current location. You can find a location near another town or location.
Select an option.
1
My Current Route and My Destination can be set when the route is active.
The following options are available:
• Where I Am Now : Searches near your current location.
• My Current Route : Searches along your current route.
• My Destination : Searches near your current destination.
• A Different Town : Searches near the town you enter.
• A Recent Destination : Searches near a recent destination.
• A Favourite Destination : Searches near a favourite place.
Continued 55
56 uu u
■
Adding Shortcuts
H u u
Up to 36 shortcut icons can be stored.
Select an option you want to add as a shortcut.
■
Deleting Shortcuts
H u u
1.
Select a shortcut with if you want to delete it.
2.
Select Touch to Remove .
3.
Select Save .
uu u
57
58 uu HONDA
HONDA
H u u
Find any Honda services to set as a destination.
1.
Select the desired name from the list.
2.
Set the route to your destination.
2
Address
H u u
Enter an address to use as the destination. The town or country you are currently in is displayed.
Select an option.
The following options are available:
• Spell Town : Selects your destination town.
2
• Spell Post Code : Selects your destination post code.
2
• Search All : Sets an address to use as the destination.
2
• Change Country : Selects the change country.
2
Selecting the Change Country P. 60
uu Address
Continued 59
60 uu Address
■
Selecting the Change Country
H u u Change Country
1.
Enter a country name.
2.
Select a country from the list.
uu Address
■
Search All
H u u Search All
1.
Enter the house number. Select
Done .
1
The order of the steps may change depending on the map data loaded on your system.
2.
Enter the street name. Select
Done .
u A list of matching hits is automatically displayed after you enter several letters, with the closest match at the top of the list.
3.
Select your destination from the list.
u If the select town screen is displayed, select a town.
4.
Select Go!
to set the route to your destination.
2
Continued 61
62 uu Address
■
Selecting the Town
H u u Spell Town
1.
Enter the name of a different town. Select Done .
u A list of matching hits is automatically displayed after you enter several letters, with the closest match at the top of the list.
1
You do not need to enter spaces or symbols (e.g., &,
-, %).
The order of the steps may change depending on the map data loaded on your system.
2.
Select your destination town from the list.
u Next, you are prompted to enter a house number.
2
uu Address
■
Selecting the Post Code
H u u Spell Post Code
1.
Enter the postal code. Select
Done .
1
The order of the steps may change depending on the map data loaded on your system.
2.
Select your destination postal code from the list.
3.
Enter the house number. Select
Done .
4.
Enter the street name. Select
Done .
5.
Select your destination street from the list.
2
63
64 uu Categories
Categories
Select the category of a place (e.g., Restaurants, Petrol Stations, Shopping) stored in the map database to search for the destination.
■
Finding a Location by Category
H u u
1
This option is convenient if you do not know the exact name of a place or if you want to narrow down the number of matches returned for places with a common name.
1.
Select a category.
2.
Select a subcategory.
u If the subcategory screen is not displayed, proceed to step 3.
uu Categories
3.
Select a place name from the list.
4.
Select Go!
to set the route to your destination.
2
1
Quick Search screen
After you have performed a search for a destination, certain categories display a Quick Search list that display the several destinations you selected.
Continued 65
66 uu Categories
■
Finding a Location by Junctions
H u u Junctions
Select the junction of two streets as the destination.
1.
Select Spell Town .
u If selecting Search All , proceed to step 4.
u Select Change Country , if necessary.
2
1
Finding a Location by Junctions
If there is more than one junction, you are prompted to select the junction.
2.
Enter a town name. Select Done .
u A list of matching hits is automatically displayed after you enter several letters, with the closest match at the top of the list.
3.
Select a town.
4.
Enter the Street 1 name. Select
Done .
u A list of matching hits is automatically displayed after you enter several letters, with the closest match at the top of the list.
5.
Select the street from the list.
u Repeat step 4 to enter the street 2 name.
6.
Select the junction.
7.
Select Go!
to set the route to your destination.
2
uu Categories
Continued 67
68 uu Categories
■
Finding a Town
H u u Towns
Selects your destination town.
1.
Select a town.
u Select Enter Search and enter a town name if you want to narrow down the number of matches.
2.
Select Go!
to set the route to your destination.
2
uu Categories
■
Finding a Location Using Coordinates
H u u Coordinates
You can find a location using latitude and longitude coordinates. This can be helpful when geocaching.
1.
Select the latitude coordinate.
2.
Enter the new coordinate. Select
Done .
3.
Select the longitude coordinate.
4.
Enter the new coordinate. Select
Done .
5.
Select View on Map .
6.
Select Go!
to set the route to your destination.
2
1
Finding a Location Using Coordinates
If you want to change the coordinate format, select
or select and then select Format .
69
70 uu Favourites
Favourites
H u u
Select a favourites location to use as the destination.
1.
Select your destination from the list.
2.
Select Go!
to set the route to your destination.
2
1
You can add, edit, or delete the saved place.
2
uu History
History
H u u
Select an address from a list of your 50 most recent destinations to use as the destination. The list is displayed with the most recent destination at the top.
1.
Select your destination from the list.
2.
Select Go!
to set the route to your destination.
2
1
If you want to delete all recent destinations, select
or select and then select Clear .
71
72 uu Map Input
Map Input
H
u u
Scroll the map to manually select an icon or a location as the destination.
1.
Select any point on the map, a street, junction, or category icon.
u Return to the current location when you press the button.
2.
Select Go!
to set the route to your destination.
2
1
You can customize the map as you like using ,
2
If you want to display a specific category of places, select and then select a category icon.
The place information is displayed when you select the on the map.
2
Viewing the Destination Map P. 75
Calculating the Route
This section describes how to calculate your route.
Select Go!
.
u The system calculates and displays the route line on the map screen.
1
If the system has many guidance points on the route to the destination, it may stop calculation.
In this case, the route guidance will start when you select OK .
The following options are available:
• Routes : Displays different routes.
2
Viewing and Selecting the Routes P. 74
• : Display the destination on the map.
2
Viewing the Destination Map P. 75
73
74 uu Viewing and Selecting the Routes
Viewing and Selecting the Routes
View and select different routes to your destination.
1.
Select or to change a route.
u The travel distance, estimated travel time, and traffic information are displayed for each route.
2.
Select Go!
.
u The system calculates and displays the route line on the map screen.
uu Viewing the Destination Map
Viewing the Destination Map
1.
Select an option.
2.
Select Go!
.
u The system calculates and displays the route line on the map screen.
1
When you select or select , you can add to the favourites location list.
2
The following options are available:
• Route Info : Displays different routes.
2
Viewing and Selecting the Routes P. 74
• Set Location : Sets the vehicle position when you are indoors or not receiving satellite signals.
You can use this feature when GPS Simulator is set to on.
2
75
76
Driving to Your Destination
Viewing the Route
This section describes how to follow the route guidance to your destination.
■
Map Screen
Speed limit icon
Next guidance indicator
Dashboards
After calculating the route to your destination, the route is displayed on the map screen.
2
As you drive, the system tracks your position on the map in real time and provides guidance as you approach each guidance point on the route.
1
When your phone is connected to Hands-Free
Telephone system, the navigation screen will switch to the incoming call screen when receiving a call.
Speed limit icon
The speed limit shown on the map may be different from the actual speed limit.
The speed limit icon is not displayed on all roads.
Select the vehicle icon to view the Where Am I?
screen.
2
Viewing the Current Location Information
You can stop your vehicle en route (e.g., to rest, stop for petrol, etc.), and then continue on your route.
If you did not complete your route, the navigation restarts when you restart your vehicle.
The following options are available:
• Select the text bar on the top of the map to display the turn list screen.
2
• Select the Next guidance indicator to display the turn information screen or junction view screen.
2
• Select to cancel the route guidance and remove your current route.
2
• Select to display the map menu.
2
• Select to display the parking information screen of nearby parking.
uu Viewing the Route
• Select the map dashboards when you want to change the information that is displayed. Select the following options:
Estimated Time of Arrival , Distance to Destination , Estimated Time to
Destination , Via Arrival , Distance to Via , Time to Via , Direction of Travel ,
Elevation .
■
Turn List
The turn list screen displays turn-by-turn instructions and the distance between turns.
Select the text bar on the top of the map.
u Select a turn to display the detailed information.
2
u Select or select to display the entire route on the map.
2
1
The next guidance indicator does not appear in the following cases.
• The vehicle speed is 4.8 km/h (3 mph) or less
• The GPS signal is weak
• The vehicle position on the map and current vehicle position do not match
The system displays a roundabout to the next guidance indicator in the following cases.
• Its diameter is 25 m (82 ft) or more
• There is no road inside it
• There is no stop sign
Turn-by-Turn Directions
The next guidance point appears on the Driver
Information Interface (DII).
The Turn-by-Turn directions may not be displayed if the information cannot be received correctly.
Continued 77
78 uu Viewing the Route
■
Turn Information
The turn information screen displays the turn on the map and the distance and time remaining before you reach the turn. The lane assist screen may display a view of the upcoming junction.
Select the next guidance indicator of the map or select any turn on the turn list screen.
1
Junction View Screen
The junction view screen displays a view of the upcoming junction and which lane you should be driving.
■
Entire Route
The entire route screen displays the entire route, destination name, time to destination, and distance to destination.
1.
Select the text bar on the top of the map.
2.
Select or select
3.
Select Map to display the entire route screen.
u Press the button to return to the previous screen.
■
Deviating From the Planned Route
If you leave the calculated route, the system automatically recalculates a route to the set destination based on your current location and direction.
uu Viewing the Route
■
Trip Log Display
If you set the trip log to show, a series of lines (breadcrumbs) are displayed to track the path you are taking.
2
1
You can delete the Trip Log.
2
2
Reset Factory Default Settings P. 50
79
80
Map Operation
Customize the map, set a destination, and save a place from the map.
1.
Select any point on the map.
2.
Select an option.
u If you want to set a destination or save a location in the map, scroll the map and select the desired location.
2
2
•
•
•
•
The following options are available:
• : Zooms in to the map.
: Zooms out of the map.
: Switches the map to 2D or 3D.
: Rotates the 3D map.
: Sets the data that appears on the map.
2
1
When you select Track Up or North Up , the current map scale and the (Track Up only) appear on the map.
The always points to North.
2
Driving Map View (Map Orientation) P. 29
Map Menu
H
u
Select an option.
The following options are available:
• Where To?
: Enters a new destination.
2
• Mute : Turns the voice prompts on or off.
• Stop : Cancels the route guidance and removes your current route.
• Detour : Calculates a detour route.
2
• Exit Services : Displays a list of the exit services for the route.
2
• Where Am I?
: Displays the information about your current location.
2
Viewing the Current Location Information P. 83
• Map Layers : Sets the data that appears on the map.
2
• ecoRoute TM : Uses the ecoRoute TM features.
2
• Settings : Change settings for navigation functions.
2
Continued uu Map Menu
1
You can also display the map menu by selecting on the map screen.
81
82 uu Map Menu
■
Viewing Exit Services
H
u u
You can view exit services (e.g., whether the exit is near petrol stations, restaurants, etc.) and add new destinations or waypoints to the calculated route.
1.
Select or to display your desired list of exit services.
2.
Select a category tab.
3.
Select an option.
u The location is displayed on the
Calculate Route screen.
2
1
The map screen of the selected exit is displayed when you select .
■
Viewing the Current Location Information
H
u u
You can confirm your current location, address, and nearest junction.
Select an option.
uu Map Menu
1
Viewing the Current Location Information
Vehicle position may not be displayed when:
• The vehicle is traveling off-road.
• The vehicle position data cannot be updated.
The following options are available:
• Save : Saves your current location.
2
Saving Your Current Location P. 20
• Hospitals / Police Stations / Fuel : Searches for a hospital, police station, or petrol station around your current location.
2
Searching Near Establishment P. 91
Continued 83
84 uu Map Menu
■
Using Directions to Me
H
u u
Get a list of directions to your current location.
1.
Select or select .
2.
Select Directions to Me .
3.
Select an option.
4.
Select Select .
u The turn list screen displays turn-by-turn instructions and the distance between turns.
2
uu Traffic Information
Traffic Information
When you set the traffic feature, the system examines traffic conditions and optimizes the route for the shortest time. If a severe traffic delay occurs while you are navigating, the system searches for a faster route. If it finds one, the system will prompt you and you can choose to accept the new route.
The traffic icon changes colour to indicate the severity of traffic conditions on your route or on the road you are currently traveling. The system may route you through a traffic delay if a better alternative route does not exist. The delay time is added into your estimated time of arrival automatically.
1.
Select on the map screen.
2.
Select an option.
The following options are available:
• Alternate Route : Display the alternate route screen.
2
• Traffic On Route : Displays the traffic delays on your route. You can select the traffic you want to avoid.
2
Traffic Rerouting Manually P. 86
• Traffic Conditions : Display the traffic flow and delays on nearby roads.
2
• Traffic Legend : Displays an overview of traffic legends.
2
1
You can change the traffic information settings.
2
The traffic icon changes colour to indicate the severity of traffic conditions.
• Green: Flowing freely.
• Yellow: Moderate traffic condition.
• Red: Very slow or stop-and-go traffic.
• Gray: No traffic data.
■
Alternate Route
H
u u
Display the alternate route screen.
Select Go!
.
Continued 85
86 uu Traffic Information
■
Traffic Rerouting Manually
H
u u
View the traffic delays on your route, including the estimated time of each delay and the distance to each delay. You can select the traffic you want to avoid manually.
1.
Display a list of traffic events.
2.
Select an option.
3.
Select and then select Avoid to avoid the traffic delay.
u Select or to view other traffic delays on your route.
■
Viewing Traffic Delays
H
u u
View the traffic flow and delays on nearby roads.
u Select if you want to display a list of traffic delays.
■
Viewing Traffic Legends
H
u u
See an overview of the icons and colours used on the traffic map.
The system displays the traffic legend.
Changing Your Route
Stopping the Route
Stop the route guidance and remove the destination and all waypoints.
Select .
1
You can also stop your route from the map menu.
2
87
88 uu Taking a Detour
Taking a Detour
H
u u (when en route)
Calculate a new route to avoid something ahead of you. The system creates a new route if possible. The system attempts to get you back on your original route as quickly as possible.
1
If your current route is the only reasonable option, the system might not calculate a detour.
■
Taking a Detour Around Specified Areas
You can take a detour for a specified distance along your route or detour around specific roads. This is useful if you encounter construction zones, closed roads, or poor road conditions.
Select an option.
The following options are available:
• Next 0.5 mile on Route : Calculates a new route by avoiding the next 0.5 mile on your route.
• Next 2 mile on Route : Calculates a new route by avoiding the next 2 miles on your route.
• Next 5 mile on Route : Calculates a new route by avoiding the next 5 miles on your route.
• Detour by Road(s) on Route : Calculates a new route by avoiding the specific roads on your route. Select roads from the turn list.
1
Taking a Detour Around Specified Areas
You can use this feature when Advanced Detours is set to On.
2
Select to delete all detours.
uu Adding Waypoints
Adding Waypoints
Add waypoints (pit stops) along the route to your destination.
1.
While en route, select a search method to add a new destination or waypoint.
2
2.
Select a place. Select Go!
.
3.
Select Add to Active Route .
u Select Start New Route to set the location as your new destination.
2
4.
Select and hold , or and then move the destination to the desired position.
5.
Select Done .
u The route is automatically recalculated and displayed on the map screen.
1
When you add a waypoint, the system may take some time to update the arrival time.
89
90
Changing Your Destination
Selecting a Destination on the Map
Select a new destination when en route by selecting a location on the map.
1.
Select any point on the map, or a street, junction, or category icon.
2.
Select Go!
.
3.
Select an option.
The following options are available:
• Start New Route : Sets the location as your new destination.
• Add to Active Route : Sets the location as the first waypoint in the Edit Route screen.
2
uu Searching Near Establishment
Searching Near Establishment
H
u u
Search for a hospital, police station, or petrol station around your current location.
1.
Select a category type.
u You can also confirm your current location, address, and nearest junction.
2.
Select a place.
3.
Select Go!
.
Continued 91
92 uu Searching Near Establishment
4.
Select an option.
The following options are available:
• Start New Route : Sets the location as your new destination.
• Add to Active Route : Sets the location as the first waypoint in the Edit Route screen.
2
uu Entering a New Destination
Entering a New Destination
H
u
Enter a new destination using the Destination menu screen even when you are en route.
1.
Select a search method to enter a new destination.
2
2.
Select a place and then select Go!
.
1
You can also display the Where To?
screen by pressing the button on the navigation top screen.
3.
Select an option.
The following options are available:
• Start New Route : Sets the location as your new destination.
• Add to Active Route : Sets the location as the first waypoint in the Edit Route screen.
2
93
94 uu Entering a New Destination from Trip Planner
Entering a New Destination from Trip Planner
You can use the trip planner to create and save a route with multiple destinations.
■
Creating Your Route
H
u u u u Select Start Location
1.
Select a method to enter a new destination.
2
2.
Select Select .
3.
Select to add additional locations.
u Repeat steps 1 and 2 to enter the destination.
u Select and hold , or and then move the destination to the desired position.
u Select to delete unwanted destinations.
4.
Select Next .
uu Entering a New Destination from Trip Planner
5.
Enter a route name.
6.
Select Done .
7.
Select Go!
.
u Select Map to display the destination and waypoints on the map screen.
2
u Select to display the Edit
Trip screen.
2
8.
Select the next destination from the list.
9.
Select Start .
u The route is automatically recalculated and displayed on the map screen.
Continued 95
96 uu Entering a New Destination from Trip Planner
■
Using the Saved Route
H
u u Trip Planner
1.
Select a saved route.
2.
Select Go!
.
3.
Select the next destination from the list.
4.
Select Start .
u The route is automatically recalculated and displayed on the map screen.
■
Editing the Saved Route
H
u u Trip Planner
1.
Select a saved route you want to edit.
2.
Select .
uu Entering a New Destination from Trip Planner
3.
Select an option.
The following options are available:
• Edit Destinations : Edits the destination list of the saved trip.
2
• Delete Trip : Deletes a saved trip.
• Rename Trip : Enters a new name for the saved trip.
• Optimise Order : Automatically orders the waypoints in the destination list.
2
Reorder Your Destination List Automatically P. 101
• Route Preference : Changes the route preferences (calculating method).
2
Recalculate Using Another Route Preference P. 102
97
98 uu Editing the Destination List
Editing the Destination List
You can use the trip planner to edit and save a route with multiple destinations.
■
Editing Places on Your Route
H
u u Trip Planner
1.
Select the trip you want to edit.
1
Select Map to display the destination and waypoints on the map screen.
2
2.
Select a place from the destination list.
3.
Select an option.
The following options are available:
• Departure Time (current location only): Sets the departure time.
• Clear Departure Time (current location only): Clears the departure time.
• Arrival Time (destination and waypoints): Sets the arrival time.
• Clear Arrival Time (destination and waypoints): Clears the arrival time.
• Duration (waypoints only): Sets the duration time.
• Change Location : Changes the destination or waypoint.
• Remove Location : Removes the destination or waypoint.
• Rename Location : Enters a new name for the location.
uu Editing the Destination List
Continued 99
100 uu Editing the Destination List
■
Editing Your Route
H
u u Trip Planner
1.
Select the trip you want to edit.
2.
Select .
3.
Select Edit Destinations .
4.
Select and hold , or and then move the destination to the desired position.
u Select to add a new location.
u Select to delete destinations from the destination list.
5.
Select Save .
u The route is automatically recalculated.
uu Editing the Destination List
■
Saving Your Route
H
u u Trip Planner (when en route)
1.
Select Unsaved Trip .
2.
Select .
3.
Select Save Trip .
4.
Enter a route name.
5.
Select Done .
■
Reorder Your Destination List Automatically
H
u u Trip Planner
Automatically order the waypoints in the destination list.
1.
Select the trip you want to edit.
2.
Select .
3.
Select Optimise Order .
4.
Select Map to display the destination and waypoints on the map screen.
Continued 101
102 uu Editing the Destination List
■
Recalculate Using Another Route Preference
H
u u Trip Planner
The route preference is just for this time. If you want to change the route preference for routing, change the navigation settings.
2
Recalculates the route using another route preference.
1.
Select the trip you want to edit.
2.
Select .
3.
Select Route Preference .
4.
Select an option.
5.
Select Save .
u The route is automatically recalculated.
Other Features
This section describes the useful functions incorporated into the navigation system.
About Apps Menu ................................ 104
ecoRoute TM ............................................ 105
Setting Up the Vehicle Profile ............... 106
Viewing the Vehicle Profile ................... 108
Calibrating the Fuel Economy ............... 109
Viewing the ecoChallenge Scores ......... 110
Viewing Fuel Economy Information ...... 111
Viewing a Mileage Report .................... 111
Information Functions .......................... 112
Help ..................................................... 112
Where I've Been ................................... 113
Calculator ............................................ 114
Unit Converter ..................................... 115
GPS Information................................... 116
103
About Apps Menu
H
u u
Display the useful functions incorporated into the navigation system.
Select an option.
104
The following options are available:
• Help : Displays the Help function.
2
• ecoRoute TM : Allows for mileage and fuel cost entry and displays fuel economy information, mileage reports, your driving habits, and vehicle information.
2
• Trip Planner : Sets the trip planner to create and save a trip with multiple destinations.
2
Editing the Destination List P. 98
2
Entering a New Destination from Trip Planner P. 94
• Where I've Been : Displays your previous routes and places you have stopped on the map.
2
• Calculator : Displays the Calculator function.
2
• Unit Converter : Displays the Unit Converter function.
2
ecoRoute
TM
H
u u ecoRoute TM
The ecoRoute TM feature calculates the fuel economy and the fuel price of navigating to a destination and offers tools for improving fuel efficiency.
The data provided by the ecoRoute TM feature is an estimate only.
To receive more accurate fuel reports for your specific vehicle and driving habits, calibrate the fuel economy.
Select an option.
1
The first time you use the ecoRoute TM features, you must enter vehicle information.
2
Setting Up the Vehicle Profile P. 106
The following options are available:
• At The Pump : Calibrates the fuel economy to receive more accurate fuel reports.
2
Calibrating the Fuel Economy P. 109
• ecoChallenge : Helps you maximise the vehicle fuel economy by scoring your driving habits.
2
Viewing the ecoChallenge Scores P. 110
• Fuel Economy : Displays fuel economy information.
2
Viewing Fuel Economy Information P. 111
• Vehicle Profile : Checks or resets your vehicle information.
2
Viewing the Vehicle Profile P. 108
• Mileage Report : Displays mileage reports for your vehicle.
2
Viewing a Mileage Report P. 111
105
106 uu TM Setting Up the Vehicle Profile
Setting Up the Vehicle Profile
H
u u ecoRoute TM
The first time you use the ecoRoute TM features, you must enter vehicle information.
1.
Select Yes .
2.
Select a fuel type.
3.
Select Next .
4.
Enter your estimated city fuel economy number.
5.
Select Next .
6.
Enter your estimated motorway fuel economy.
7.
Select Next .
8.
Enter the fuel price.
9.
Select Next .
u The confirmation message will appear.
10.
Select OK .
uu TM Setting Up the Vehicle Profile
107
108 uu TM Viewing the Vehicle Profile
Viewing the Vehicle Profile
H
u u ecoRoute TM
Select Vehicle Profile .
u If you want to reset the Vehicle
Profile , select Reset .
Calibrating the Fuel Economy
H
u u u TM u
You can calibrate the fuel economy to receive more accurate fuel reports for your specific vehicle and driving habits. You should calibrate when you fill up your fuel tank.
1.
Enter the current fuel price.
2.
Enter the amount of fuel the vehicle has used since the last time the fuel tank was filled.
3.
Enter the distance you have traveled since the last time the fuel tank was filled.
4.
Select Next .
u The system calculates the average vehicle fuel economy.
5.
Select Save .
uu TM Calibrating the Fuel Economy
109
uu TM Viewing the ecoChallenge Scores
Viewing the ecoChallenge Scores
H
u u u TM u
The ecoChallenge feature helps you maximise fuel economy by scoring your driving habits. The higher your ecoChallenge scores, the more fuel you have saved. The ecoChallenge collects data and calculates a score whenever the vehicle is moving.
1
Viewing the ecoChallenge Scores
If you want to reset the ecoChallenge scores, select
and then select Reset .
110
The following information is displayed:
• Current : Displays the score for your current driving activity.
• Overall : Displays an average of the speed, acceleration, and braking score.
• Speed : Displays your score for driving your vehicle at the optimal speed for conserving fuel (72–96 km/h (45–60 mph) for most vehicles).
• Acceleration : Displays your score for smooth and gradual acceleration. You lose points for rapid acceleration.
• Braking : Displays your score for smooth and gradual braking. You lose points for hard braking.
uu TM Viewing Fuel Economy Information
Viewing Fuel Economy Information
H
u u u TM u
You can view your fuel consumption, your total fuel cost, and your average fuel economy.
Select a section of the graph to zoom in.
1
Viewing Fuel Economy Information
If you want to reset the Fuel Economy information, select and then select Reset .
Viewing a Mileage Report
H
u u u TM u
You can view saved mileage reports on the system.
Select a report.
u Display the Mileage Report.
1
Mileage Reports
Mileage reports provide the distance, the time, the average fuel economy, and the fuel cost of navigating to a destination.
A mileage report is created for every route that you drive. If you stop a route on the system, a mileage report is created for the distance you traveled.
111
112
Information Functions
Help
H
u u Help
Select a help topic you want to display.
1
You can also display the help topic to select on each menu screen.
■
Searching Help Topics
H
u u Help u
1.
Enter a keyword. Select Done .
2.
Select a help topic you want to display.
uu Where I've Been
Where I've Been
H
u u Where I've Been
Before you can use this feature, you must enable the travel history feature. You can view your previous routes and places you have stopped on the map.
1
If you want to delete the recorded information, select
and then select Clear Travel History .
If you select , you can select the day to display the travel history.
113
114 uu Calculator
Calculator
H
u u Calculator
Enter a numeric value to calculate.
Unit Converter
H
u u Unit Converter
1.
If necessary, select a measurement category (e.g., Distance ).
u Select a measurement category from the list. Select Save .
2.
If necessary, select a unit of measurement (e.g., km ).
u Select a unit of measurement from the list. Select Save .
3.
Enter a numeric value to convert
(e.g., 1000). Select Done .
uu Unit Converter
115
116 uu GPS Information
GPS Information
H
u
The GPS info screen displays the satellites' status.
Select and hold .
u A solid bar indicates that the GPS satellite is ready for use.
Troubleshooting
Troubleshooting ................................... 118
Map, Voice, Entering Destinations ........ 118
Traffic .................................................. 119
Guidance, Routing ............................... 120
Update, Coverage, Map Errors ............. 121
Display, Accessories.............................. 121
Miscellaneous Questions ...................... 122
117
118
Troubleshooting
Map, Voice, Entering Destinations
Problem
The Startup Confirmation screen is displayed every time I start the car.
The navigation system reboots by itself (returns to the opening screen).
How do I specify a destination when an entered town or street could not be found?
How do I delete favourites places?
I cannot hear the navigation system voice.
Solution
This is normal. The Startup Confirmation screen reminds you and your guest drivers to always operate the navigation system in a safe manner. The Startup
Confirmation screen goes off after a certain period of time, even if you do not select OK .
A reboot can be caused by extreme temperatures or shock from bumpy roads, and does not necessarily indicate a problem. If this happens frequently, please see your dealer.
Try selecting the destination directly from the map.
2
1.
Press the button. Select > Favourites > > Delete Favourite(s) .
2.
Select saved places you want to delete.
3.
Select Delete .
4.
Select Yes .
1.
Press the button and then press the button. Select Setting > Navigation and set Voice Prompts to on.
2.
Press the button. Select Settings > System > Sound/Beep tab.
Turn up Guidance Volume , if guidance volume is low.
For more details, see the Owner’s Manual.
uu Traffic
Traffic
Problem
Traffic information is missing or is not displaying properly. What is wrong?
Solution
Verify the following:
● Traffic information relies on a clear signal. If signal strength is low, traffic data may not be available.
●
●
Check that the traffic icons are turned on.
2
It is possible that there is a temporary technical problem with your metropolitan
●
● area traffic provider. You can call Honda Automobile Customer Service to see if there is an outage.
2
Honda Automobile Customer Service Contact Information P. 126
If the situation persists, see your dealer for assistance.
Traffic information is available only in certain areas.
119
120 uu Guidance, Routing
Guidance, Routing
Problem
The navigation system does not route me the same way I would go or the same way as other mapping systems.
Solution
The navigation system attempts to generate the optimal route. You can change the route preferences used when calculating a route.
2
Recalculate Using Another Route Preference P. 102
The street I’m on is not shown on the map screen. The mapping database is constantly undergoing revision.
The vehicle position icon is not following the road. ● Check that the GPS antenna (located in the dashboard) is not blocked. For best reception, remove items from the dashboard, such as radar detectors, cellular phones, or loose articles.
● Metallic tinting or other aftermarket devices can interfere with GPS reception.
Please consult your dealer.
2
How do I stop the map from rotating as I drive along?
1.
Press the button and then press the button.
2.
Select Settings > Map & Vehicle > Driving Map View .
3.
Check that Driving Map View is set to Track Up or 3-D .
4.
Select North Up and the select Save .
The “Arrival time” display sometimes increases even though I am getting closer to my destination.
My elevation (shown when I display the current position) seems to fluctuate even though my elevation has not changed.
My elevation is missing on the “current position” screen.
“Arrival time” is based on the speed limit on each road. Depending on the traffic conditions, the “Arrival time” may be calculated to be earlier or later.
This is normal. The elevation can vary ±30 m (100 ft) due to GPS calculation errors.
2
The elevation is only displayed if the GPS antenna can receive signals from at least four satellites. Try moving the vehicle into an open area. The elevation is also not displayed if the calculated elevation is zero or below sea level.
uu Update, Coverage, Map Errors
Update, Coverage, Map Errors
Problem
My town is not part of a fully verified detailed coverage area.
Does the navigation system work outside coverage area?
Solution
The mapping database is constantly undergoing revision.
The navigation system will not work outside map coverage area. You can maximize the map coverage by zooming out of the map.
2
Display, Accessories
Problem
The display appears dim when starting the car in really cold weather.
Solution
This is normal. The display will become brighter after a few minutes.
121
122 uu Miscellaneous Questions
Miscellaneous Questions
Problem
My clock frequently changes forward and backward by one hour.
How do I change the interface language?
Solution
The clock setting is automatically updated based on your GPS location. If you are driving near a time zone border, the automatic update likely is the reason.
Press the button and then select Settings > System > Others tab >
Language .
Select the desired language for system language.
For more information, see the Owner's Manual.
Reference Information
System Limitations ................................124
GPS ......................................................124
Address Calculation ..............................124
Database ..............................................124
Customer Assistance .............................126
Resolving Problems ...............................126
Obtaining a Navigation Update .............126
Honda Automobile Customer Service
Contact Information............................126
Visiting Your Dealer ..............................126
Map Coverage ......................................126
Traffic Information ................................126
Legal Information ................................. 127
User Agreement ................................... 127
123
124
System Limitations
GPS
The signals received from GPS satellites are extremely weak (less than a millionth of the strength of a local FM station) and require an unobstructed view of the sky. The GPS antenna is located in the dashboard. The signal reception can easily be interrupted or interfered with by the following:
• Metallic window tint on the front or side windows
• Cellular phones, PDAs, or other electronic devices docked in a cradle or lying loose on the dashboard
• Remote starters or “hidden” vehicle tracking systems mounted near the navigation unit
• Audio electronic devices mounted near the navigation unit
• Trees, tall buildings, motorway overpasses, tunnels, or overhead electrical power wires
GPS is operated by the U.S. Department of
Defense. For security reasons, there are certain inaccuracies built into GPS for which the navigation system must constantly compensate.
This can cause occasional positioning errors of up to several hundred feet (meters).
Database
The digitized map database reflects conditions as they existed at various points in time before production. Accordingly, your database may contain inaccurate or incomplete data or information due to the passage of time, road construction, changing conditions, or other causes.
Address Calculation
The destination icon shows only the approximate location of a destination address. This occurs if the number of possible addresses is different from the number of actual addresses on a block. For example, the address 1425 on a 1400 block with 100 possible addresses (because it is followed by the 1500 block) will be shown a quarter of the way down the block by the system. If there are only 25 actual addresses on the block, the actual location of address
1425 would be at the end of the block.
For example, some places/landmarks may be missing when you search the database because the name was misspelled, the place was improperly categorized, or a place/ landmark is not yet in the database. This is also true for police stations, hospitals, and other public institutions. Do not rely on the navigation system if you need law enforcement or hospital services. Always check with local information sources.
The database does not include, analyze, process, consider, or reflect any of the following categories of information:
• Neighborhood quality or safety
• Population density
• Availability or proximity of law enforcement
• Emergency, rescue, medical, or other assistance
• Construction work, zones, or hazards
• Road and lane closures
• Legal restrictions (such as vehicular type, weight, load, height, and speed restrictions)
• Road slope or grade
• Bridge height, width, weight, or other limits
• Traffic facilities safety
• Special events
• Pavement characteristics or conditions
We assume no liability for any incident that may result from an error in the program, or from changed conditions not noted above.
Every effort has been made to verify that the database is accurate. The number of inaccuracies you experience increases the longer you go without obtaining an updated map database.
2
Obtaining a Navigation Update P. 126
uu Database
125
126
Customer Assistance
Resolving Problems
If you run into a specific issue that you cannot resolve, consult the following help resources:
• For navigation system issues:
2
Or, please contact your dealer.
• For traffic-related issues:
2
• For reporting issues with the database or places/landmarks:
• Visit
https://my.garmin.com/mapErrors/ report.faces
Obtaining a Navigation
Update
Honda is continuously updating the navigation system.
Navigation system software is usually updated annually.
Please contact your Honda dealer for further information regarding the update program available for your vehicle.
Honda Automobile
Customer Service Contact
Information
Please contact your dealer.
Visiting Your Dealer
If you have a question that you cannot resolve using the available help resources, you can consult your dealer. Please identify the specific issue (e.g., error occurs when you enter a specific address, when driving on a certain road, or just when it’s cold) so that the service advisor can refer the issue to the factory so that a solution can be found.
Be patient, the service advisor may be unfamiliar with your specific issue.
Map Coverage
The navigation system provides map coverage for the Albania, Andorra, Austria,
Azores Islands, Balearic Islands, Belarus,
Belgium, Bosnia/Herzegovina, Bulgaria,
Canary Island (Gran Canaria/Tenerife),
Channel Islands, Ceuta, Croatia, Cyprus,
Czech, Denmark, Estonia, Finland, France,
French Guiana, Germany, Gibraltar, Greece,
Guadeloupe, Hungary, Iceland, Ireland, Isle of Man, Italy, Latvia, Liechtenstein,
Lithuania, Luxembourg, Macedonia,
Madeira, Malta, Martinique, Moldova,
Monaco, Netherlands, Norway, Poland,
Portugal, Reunion, Romania, Saint
Barthelme, San Marino, Serbia/
Montenegro/Kosovo, Slovakia, Slovenia,
Spain, Sweden, Switzerland, Turkey, UK and Ukraine.
Traffic Information
Continuously updated traffic information is available in major metropolitan areas.
Legal Information
User Agreement
■
END USER TERMS
The content provided (“Data”) is licensed, not sold. By opening this package, or installing, copying, or otherwise using the
Data, you agree to be bound by the terms of this agreement. If you do not agree to the terms of this agreement, you are not permitted to install, copy, use, resell or transfer the Data. If you wish to reject the terms of this agreement, and have not installed, copied, or used the Data, you must contact your retailer or HERE North
America, LLC (as defined below) within thirty (30) days of purchase for a refund of your purchase price. To contact HERE, please visit www.here.com
.
The Data is provided for your personal, internal use only and may not be resold. It is protected by copyright, and is subject to the following terms (this “End User License
Agreement”) and conditions which are agreed to by you, on the one hand, and
HERE and its licensors (including their licensors and suppliers) on the other hand.
For purposes of these terms, “HERE” shall mean (a) HERE North America, LLC with respect to Data for the Americas and/or the
Asia Pacific region and (b) HERE Europe B.V. for Data for Europe, the Middle East and/or
Africa.
The Data includes certain information and related content provided under license to
HERE from third parties and is subject to the applicable supplier terms and copyright notices set forth at the following URL: http://corporate.navteq.com/ supplier_terms.html.
License Limitations on Transfer: Your limited license does not allow transfer or resale of the Data, except on the condition that you may transfer the Data and all accompanying materials on a permanent basis if: (a) you retain no copies of the Data;
(b) the recipient agrees to the terms of this
End User License Agreement; and (c) you transfer the Data in the exact same form as you purchased it by physically transferring the original media (e.g., the CD-ROM or
DVD you purchased), all original packaging, all Manuals and other documentation.
Specifically, Multidisc sets may only be transferred or sold as a complete set as provided to you and not as a subset thereof.
■
TERMS AND CONDITIONS
License Limitations on Use: You agree that your license to use this Data is limited to and conditioned on use for solely personal, noncommercial purposes, and not for service bureau, timesharing or other similar purposes. Except as otherwise set forth herein, you agree not to otherwise reproduce, copy, modify, decompile, disassemble or reverse engineer any portion of this Data, and may not transfer or distribute it in any form, for any purpose, except to the extent permitted by mandatory laws.
Additional License Limitations: Except where you have been specifically licensed to do so by HERE in a separate written agreement, and without limiting the preceding paragraph, your license is conditioned on use of the Data as prescribed in this agreement, and you may not (a) use this Data with any products, systems, or applications installed or otherwise connected to or in communication with vehicles capable of vehicle navigation, positioning, dispatch,
Continued 127
uu User Agreement
128 real time route guidance, fleet management or similar applications; or (b) with, or in communication with, including without limitation, cellular phones, palmtop and handheld computers, pagers, and personal digital assistants or PDAs.
Warning: This Data may contain inaccurate or incomplete information due to the passage of time, changing circumstances, sources used and the nature of collecting comprehensive geographic Data, any of which may lead to incorrect results.
Disclaimer of Warranty: HERE AND ITS
LICENSORS (INCLUDING THEIR LICENSORS
AND SUPPLIERS) DISCLAIM ANY
WARRANTIES, EXPRESS OR IMPLIED, OF
QUALITY, PERFORMANCE,
MERCHANTABILITY, FITNESS FOR A
PARTICULAR PURPOSE OR NON-
INFRINGEMENT. Some States, Territories and Countries do not allow certain warranty exclusions, so to that extent the above exclusion may not apply to you.
CONDITIONS, WHETHER IN AN ACTION IN
CONTRACT OR TORT OR BASED ON A
WARRANTY, EVEN IF HERE OR ITS
LICENSORS HAVE BEEN ADVISED OF THE
POSSIBILITY OF SUCH DAMAGES. Some
States, Territories and Countries do not allow certain liability exclusions or damages limitations, so to that extent the above may not apply to you.
No Warranty: This Data is provided to you
“as is”, and you agree to use it at your own risk. HERE and its licensors (and their licensors and suppliers) make no guarantees, representations or warranties of any kind, express or implied, arising by law or otherwise, including but not limited to, content, quality, accuracy, completeness, effectiveness, reliability, fitness for a particular purpose, usefulness, use or results to be obtained from this Data, or that the Data or server will be uninterrupted or error free.
Disclaimer of Liability: HERE AND ITS
LICENSORS (INCLUDING THEIR LICENSORS
AND SUPPLIERS) SHALL NOT BE LIABLE TO
YOU IN RESPECT OF ANY CLAIM, DEMAND
OR ACTION, IRRESPECTIVE OF THE NATURE
OF THE CAUSE OF THE CLAIM, DEMAND
OR ACTION ALLEGING ANY LOSS, INJURY
OR DAMAGES, DIRECT OR INDIRECT,
WHICH MAY RESULT FROM THE USE OR
POSSESSION OF THIS DATA; OR FOR ANY
LOSS OF PROFIT, REVENUE, CONTRACTS
OR SAVINGS, OR ANY OTHER DIRECT,
INDIRECT, INCIDENTAL, SPECIAL OR
CONSEQUENTIAL DAMAGES ARISING OUT
OF YOUR USE OF OR INABILITY TO USE THIS
DATA, ANY DEFECT IN THIS DATA, OR THE
BREACH OF THESE TERMS OR
Export Control: You agree not to export from anywhere any part of the Data or any direct product thereof except in compliance with, and with all licenses and approvals required under, applicable export laws, rules and regulations, including but not limited to the laws, rules and regulations administered by the Office of Foreign Assets
Control of the U.S. Department of
Commerce and the Bureau of Industry and
Security of the U.S. Department of
Commerce. To the extent that any such export laws, rules or regulations prohibit
HERE from complying with any of its obligations hereunder to deliver or distribute Data, such failure shall be excused and shall not constitute a breach of this
Agreement.
uu User Agreement
Entire Agreement: These terms and conditions constitute the entire agreement between HERE (and its licensors, including their licensors and suppliers) and you pertaining to the subject matter hereof, and supersedes in their entirety any and all written or oral agreements previously existing between us with respect to such subject matter.
(“Claims”), you agree to submit to the personal jurisdiction of (a) the State of
Illinois for Claims related to Data for the
Americas and/or the Asia Pacific region provided to you hereunder, and (b) The
Netherlands for Data for Europe, the Middle
East and/or Africa provided to you hereunder.
Severability: effect.
You and HERE agree that if any portion of this agreement is found illegal or unenforceable, that portion shall be severed and the remainder of the
Agreement shall be given full force and
Governing Law: The above terms and conditions shall be governed by the laws of the State of Illinois (for Data for the
Americas and/or the Asia Pacific region) or
The Netherlands (for Data for Europe, the
Middle East and Africa), without giving effect to (i) its conflict of laws provisions, or
(ii) the United Nations Convention for
Contracts for the International Sale of
Goods, which is explicitly excluded. For any and all disputes, claims and actions arising from or in connection with the Data
Government End Users: If the Data is being acquired by or on behalf of the
United States government or any other entity seeking or applying rights similar to those customarily claimed by the United
States government, this Data is a
“commercial item” as that term is defined at 48 C.F.R. (“FAR”) 2.101, is licensed in accordance with this End User License
Agreement, and each copy of Data delivered or otherwise furnished shall be marked and embedded as appropriate with the following “Notice of Use”, and be treated in accordance with such Notice:
NOTICE OF USE
CONTRACTOR (MANUFACTURER/
SUPPLIER) NAME:
HERE
CONTRACTOR (MANUFACTURER/
SUPPLIER) ADDRESS:
425 West Randolph Street, Chicago, IL
60606.
This Data is a commercial item as defined in
FAR 2.101 and is subject to the End User
License Agreement under which this Data was provided.
© 1987-2013 HERE. All rights reserved.
If the Contracting Officer, federal government agency, or any federal official refuses to use the legend provided herein, the Contracting Officer, federal government agency, or any federal official must notify HERE prior to seeking additional or alternative rights in the Data.
© 1987-2013 HERE. All rights reserved.
129
130
Index
Index
Symbols a
Button
........................................ 3, 7, 25
Numbers
3D Map ........................................................ 29
D
Dashboards ................................................. 33
Data Reset ................................................... 50
Detour ......................................................... 88
Device
.......................................................... 48
Display Mode Settings ............................... 25
Driving to Your Destination
G
Go Home
...................................................... 8
GPS Information
....................................... 116
A
Adding Waypoints ...................................... 89
Apps Menu ................................................ 104
Avoidances
.................................................. 37
C
Calculating the Route
................................. 73
Calculation Mode
....................................... 36
Calculator
.................................................. 114
Cancel Route
............................................... 10
Changing Your Destination
Changing Your Route ................................. 87
Custom Avoidances
.................................... 38
Customer Assistance
................................. 126
E
ecoChallenge ............................................ 110
ecoRoute TM
................................................ 105
Editing the Destination List ....................... 98
Entering a Destination ............................... 52
Address..................................................... 59
Categories................................................. 64
Favourites.................................................. 70
History ...................................................... 71
Map Input ................................................. 72
Entering a New Destination
I
Information Functions
............................. 112
L
Language & Keyboard
............................... 45
Legal Information
.................................... 127
F
Favourites Locations ................................... 18
Deleting .............................................. 23, 24
Editing ...................................................... 21
Saving ....................................................... 18
Fuel Economy ................................... 109, 111
H
Help
...................................................... 5, 112
Home Location
........................................... 17
HOME Screen
............................................... 3
HONDA
....................................................... 58
Honda Automobile Customer Service Contact
Information ............................................ 126
M
Map & Vehicle ............................................ 27
Map Buttons
............................................... 32
Map Coverage .......................................... 126
Map Detail
.................................................. 30
Map Layers ................................................. 33
Map Menu .................................................. 81
Map Operation
.......................................... 80
Map Screen ................................................. 76
Icon ............................................................ 6
Map Screen Legend
..................................... 6
Map Theme
................................................ 31
Map Update
Obtaining Update Data ........................... 126
Map view
.................................................... 29
Mileage Report
........................................ 111
myMaps
...................................................... 34
S
Setting
Data Reset ................................................. 50
Device ....................................................... 48
Display Mode Settings ............................... 25
Language & Keyboard ............................... 45
Map & Vehicle ........................................... 27
Navigation ................................................. 35
Other Settings ........................................... 44
Personal Information ................................. 17
Traffic........................................................ 43
Start-up ....................................................... 16
Stopping the Route .................................... 87
System Limitations
.................................... 124
N
Navigation .................................................. 35
Navigation Top Screen
................................ 3
North Up
..................................................... 29
T
Track Up ...................................................... 29
Traffic
Indicator ...................................................... 6
Setting ...................................................... 43
Traffic Information..................................... 85
Troubleshooting ................................. 11, 118
O
Other Settings
............................................ 44
U
Unit Converter .......................................... 115
Units ............................................................ 44
Update System Software
Obtaining Update Data............................ 126
P
Personal Information
................................. 17
V
Vehicle ........................................................ 28
.................................. 106, 108
W
Where I’ve Been ....................................... 113
131
advertisement