MX mini

Desk Mount LCD Arm

User's Guide

Tools Needed

For Grommet Hole

Mounting

Ø 5/16” (8 mm) Ø 3/8" (9.5 mm)

English

For the latest User Installation Guide please visit: www.ergotron.com

English, Español, Français, Deutsch, Nederlands, Italiano, Svenska, 日本語, 汉语 www.ergotron.com | USA: 1-800-888-8458 | Europe: +31 (0)33-45 45 600 | China: 400-120-3051 | Japan: [email protected]

888-45-340-G-00 rev. F • 12/18 1 of 9

Hazard Symbols

Review

These symbols alert users of a safety condition that demands attention. All users should be able to recognize and understand the signi fi cance of the following Safety Hazards if encountered on the product or within the documentation. Children who are not able to recognize and respond appropriately to

Safety Alerts should not use this product without adult supervision!

Symbol Signal Word

NOTE

CAUTION

WARNING

ELECTRICAL

Level of Hazard

A NOTE indicates important information that helps you make better use of this product.

A CAUTION indicates either potential damage to hardware or loss of data and tells you how to avoid the problem.

A WARNING indicates either potential for property damage, personal injury, or death.

An Electrical indicates an impending electrical hazard which, if not avoided, may result in personal injury, fi re and/or death.

Safety

Warning: Because mounting surface materials can vary widely, it is imperative that you make sure mounting surface is strong enough to handle mounted product and equipment.

Caution:

To avoid the potential to pinch cables it is important to follow the cable routing instructions in this manual. Failure to follow these instructions may result in equipment damage or personal injury.

Components

3

4

5

2

1

1x

A

1x

10mm

1x

B

2x

C D

4x

4x

1x

M4 x 10mm

4x

15x7x1mm

M4 x 10mm

4x

M6 x 22mm

1x

1x

M8 x 95mm

M8

4mm

2x

M6 x 16mm

1x

3mm

2 of 9 888-45-340-G-00 rev. F • 12/18

Features & Speci

fi

cations

12.6”

(320 mm)

Side View

90°

< 8 lbs. (3.6 kg)

CAUTION: DO NOT EXCEED MAXIMUM LISTED

WEIGHT CAPACITY. SERIOUS INJURY OR PROPERTY

DAMAGE MAY OCCUR!

Side View

5°

360°

180°

180°

Top View

Top View

Front View

Portrait/Landscape Rotation.

Top View

888-45-340-G-00 rev. F • 12/18 3 of 9

1

CLAMP

Choose 1 of the 3 Mounting Options:

GROMMET HOLE

Ergotron WorkFit-T

4 of 9 a

1.27”-2.35”

(32-60 mm)

4mm

5

0.28”-1.36”

(7-35 mm) b c

6

2

7

888-45-340-G-00 rev. F • 12/18

GROMMET HOLE

< 3”

(77 mm) f g

4mm

888-45-340-G-00 rev. F • 12/18 c d e a b h 1x

M8

Ø 5/16” (8 mm)

Ø 3/8” (9.5 mm)

3mm

1x

M8 x 95mm

3mm

2x

M6 x 16mm

CAUTION: Bolt must be centered in hole.

2

7

5 of 9

Ergotron WorkFit-T d

6 of 9 a b c

3mm e 4mm

4x

4x

M6 x 22mm

15x7x1mm

2

7

888-45-340-G-00 rev. F • 12/18

2

Attach Display

Remove Stop Screw if you would like Portrait/Landscape Rotation.

M3 x 5mm

0°

3

4x

M4 x 10mm

4x

M4 x 10mm

NOTE: VESA plate will only accept 75mm or 100mm

VESA pattern.

NOTE: Leave enough slack in cable to allow full range of motion.

Caution: To avoid the potential to pinch cables it is important to follow the cable routing instructions in this manual. Failure to follow these instructions may result in equipment damage or personal injury.

2x

888-45-340-G-00 rev. F • 12/18 7 of 9

Adjustment Step

You may need to adjust this arm over time as the friction pivot could change tension.

8 of 9 a

10mm b

+

Increase Friction

If this product moves too easily, then you'll need to increase friction:

_

Decrease Friction

If this product is too dif fi cult to move, then you'll need to decrease friction: c

888-45-340-G-00 rev. F • 12/18

Set Your Workstation to Work For YOU!

Learn more about ergonomic computer use at: www.computingcomfort.org

Height Position top of screen slightly below eye level.

Position keyboard at about elbow height with wrists fl at.

Distance Position screen an arm's length from face—at least 20” (508mm).

Position keyboard close enough to create a 90 ˚ angle in elbow.

Angle Tilt screen to eliminate glare.

Tilt the keyboard back 10° so that your wrists remain fl at.

To Reduce Fatigue

Breathe - Breathe deeply through your nose.

Blink - Blink often to avoid dry eyes.

Break • 2 to 3 minutes every 20 minutes

• 15 to 20 minutes every 2 hours.

For Warranty visit: www.ergotron.com/warranty

For Service visit: www.ergotron.com

For local customer care phone numbers visit: http://contact.ergotron.com

NOTE: When contacting customer service, reference the serial number.

www.ergotron.com | USA: 1-800-888-8458 | Europe: +31 (0)33-45 45 600 | China: 400-120-3051 | Japan: [email protected]

© 2015 Ergotron, Inc. All rights reserved.

888-45-340-G-00 rev. F • 12/18 9 of 9