Tennant MagnaTwin1600,MagnaTwin2200 Instruction Bulletin

Add to My manuals
1 Pages

advertisement

Tennant MagnaTwin1600,MagnaTwin2200 Instruction Bulletin | Manualzz

KIT NO. 606215 Page 1 of 1

Brush Motor Retrofit Kit

INSTALLATION INSTRUCTIONS:

(Installation Time: One Hour)

TOOLS REQUIRED: Power Drill w/ 1.5” saw bit, Philips

Screwdriver, 3/8” Wrench and 1/8” Allen Wrench.

1. Remove old brush motor plate assembly from machine base. Disconnect wiring from mounting plate.

2. Remove belt pulley from old brush motor and reinstall it on new brush motor.

3. Drill two 1.5”/38,2mm holes into brush base as indicated below, only drill through inside wall. This will allow clearance for the new brush motor.

4. Install new brush motor assembly and connect wiring as shown.

3.0”/73,2mm

1.0”/25,4mm

1.0”/25,4mm

Drill Two 1.5” Dia./38,1mm

Clearance Holes As Indicated.

Wiring Harness from Machine

Wire Diagram

Black

Red

New Brush Motor Assembly

AC

+

AC

Home

606216 Rev. 00 (07–98) Tennant Company Printed in U.S.A

advertisement

Related manuals

Download PDF

advertisement