Tennant 6500,6550-E Instruction Bulletin

Add to My manuals
2 Pages

advertisement

Tennant 6500,6550-E Instruction Bulletin | Manualzz

INSTRUCTION BULLETIN

No. 340265

Machine: 6500

Published: 2-99/00

System: OPTIONS

NOTE: DO NOT DISCARD the Parts List from the Instruction Bulletin. Place the Parts

List in the appropriate place in your machine manual for future reference.

Retaining the Parts List will make it easier to reorder individual parts and will save you the cost of ordering an entire kit.

NOTE: Numbers in parenthesis ( ) are reference numbers for parts listed in Bill of Materials.

Installation instructions for demo kit number 379844

SYNOPSIS / PROBLEM:

This kit contains the parts needed to install tie down brackets on the model 6500 sweeper.

Please follow step-by-step instructions.

SPECIAL TOOLS / CONSIDERATIONS: NONE

(Estimated time to complete: 1 hour)

PREPARATION:

(Refer to FIG. 1)

FOR SAFETY: Before leaving or servicing machine, stop on level surface and set parking brake. Then turn off machine and remove key.

1. Drill two 7/16 inch diameter holes in each side of machine frame according to hole locations in figure 1.

(Refer to FIG. 1)

2. Install one tie down bracket (1) on each side of machine frame with two hex screws (3) and two hex flange nuts (2) for each bracket.

(Refer to FIG. 1)

3. Install one tie down bracket (4) on each side of rear machine frame with one hex screw (3) and one hex flange nut (2) for each bracket.

(Refer to FIG. 1)

IB 340265 (2-99) LITHO IN U.S.A.

1

1-1/2”

1-3/8”

4

3

2

2.0”

Machine Frame

1

3

2

Ref.

3

4

1

2

7/16”Dia

Four Places

FIG. 1 -- TIE DOWN BRACKET LOCATIONS

TENNANT

Part No.

82196

07792

39283

14983

BILL OF MATERIALS FOR DEMO KIT 379844

Description

Tie down bracket

Hex flange nut, M10 X 1.5

Hex screw, M10 X 1.5 25

Tie down bracket

TENNANT COMPANY

P. O. Box 1452

Minneapolis, MN 55440-1452

Qty.

6

2

2

6

IB 340265 (2-99) LITHO IN U.S.A.

advertisement

Related manuals

Download PDF

advertisement