JMA WPS-DF-K Install Instructions

Add to My manuals
2 Pages

advertisement

JMA WPS-DF-K Install Instructions | Manualzz

Install Instructions

JMA Wireless Weather Protection System

For 1/2” Connectors to Antenna or Device

Materials

WPS-DF-K

(FOR ANTENNA/ DEVICE)

WPS-4A / WPS-4S

(FOR CONNECTORS)

1/2” JMA WIRELESS

CONNECTOR

TQ-114-F18

TORQUE WRENCH

Step #1 Install WPS-4A or WPS-4S and 1/2” Connector

Slide the WPS-4A or WPS-4S onto the 1/2” cable 6-12 inches from the end prior to cable preparation.

Prep and install the 1/2” cable to install the JMA

Wireless compression connector. Refer to the 1/2” annular install instructions.

Step #2 Install WPS-DF-K

Place the WPS-DF-K onto the antenna or device female port.

Ensure that the WPS-DF-K is properly placed on the antenna or device port, positioned just past the threads.

Properly installed WPS-DF-K.

13009-01 Rev. C

7645 Henry Clay Blvd.

| Liverpool , NY 13 088 | Tel: 315-431-7 100 | [email protected]

| www.jmawireless.com

Install Instructions

JMA Wireless Weather Protection System

For 1/2” Connectors to Antenna or Device

Step #3 Connect and Torque Interface

Connect the 1/2” connector to the antenna port or device, and hand tighten.

Torque the connection to 18 ft-lbs using the TQ-114-F8 torque wrench.

Properly installed connector.

Step #4 Install WPS-4A or WPS-4S

Slide the WPS-4A or WPS-4S over the 1/2” connection making sure to overlap the port seal.

WPS-4A or WPS-4S should completely cover the first set of WPS-DF-K grooves as shown.

Completed installation of the jMA Wirelss Weather

Protection System.

13009-01 Rev. C

7645 Henry Clay Blvd.

| Liverpool, NY 13088 | Tel: 315-431-7 100 | [email protected]

| www.

jmawireless.com

advertisement

Related manuals

Download PDF

advertisement