Brother PT-P950NW Quick Setup Guide

LAJ122001A
General Description
Front
PT-P900W/PT-P950NW
1
2
4
5
ELECTRONIC LABELING SYSTEM
3
6
7
8
PT-P900W/PT-P950NW
Quick Setup Guide
English
Back
PT-P900W
Thank you for purchasing the P-touch Label Printer model
PT-P900W/PT-P950NW.
Your new PT-P900W/PT-P950NW is an intuitive, feature-rich and easy to
operate label printer that produces professional looking, high-quality labels.
This manual contains basic procedures for using the P-touch Label Printer.
Read the whole guide before using your product and keep it for later reference.
The available options and supplies may vary depending on the country.
11
9
To download and install printer drivers and software, visit our website.
10
install.brother
PT-P950NW
For more information on installing the driver and software, see Installing the
Software and Printer Driver to a Computer.
Available Manuals
 Product Safety Guide
This guide provides safety information; read it before you use the P-touch
Label Printer.
9
11
12
10
13
 Quick Setup Guide (this guide)
This guide provides basic information about using the P-touch Label Printer
along with detailed troubleshooting tips.
 User’s Guide
When downloading the installer from above install.brother and installing it, the
folder “Brother Manual” is created on your PC desktop and this manual is
stored in this folder.
This guide provides additional information about the P-touch Label Printer
settings and operations, troubleshooting tips, and maintenance instructions.
In addition, you can download individual manuals that you need from the
Brother support website.
Visit the Brother support website at support.brother.com and click Manuals on
your model page to download the other manuals.
Unpacking Your P-touch Label Printer
Before using your P-touch Label Printer, check that the package contains the
following:
P-touch Label Printer
Product Safety Guide
Quick Setup Guide
AC adapter
Power supply cord
USB cable
Tape cassette
1
2
3
4
5
6
7
Tape compartment cover
Tape exit slot
Cover open button
(Status) indicator
(Battery) indicator
(Power) button
(Feed&Cut) button
IMPORTANT
8
(Wi-Fi) button
9 AC adapter socket
10 Serial port
11 USB port
(for Computer)
12 USB host
(for Barcode Scanner)
13 LAN port
Before using the P-touch Label Printer, make sure you remove the
protective material according to the following procedure.
1 Press the cover open button to
open the tape compartment
cover.
2 Pull the tape to remove the
tape together with the
protective material.
Connecting the Power Supply
Use the AD9100ESA (AC adapter) for this P-touch Label Printer. Connect the
AC adapter directly to the P-touch Label Printer.
2.
NOTE
•
•
AC Adapter
1.
 Charging the Rechargeable Li-ion Battery
Insert the plug on the AC adapter cord into the AC adapter socket
marked DC IN 24 V on the P-touch Label Printer.
Insert the plug on the power supply cord into the AC adapter.
1.
2.
Before use, fully charge the battery.
Up to three hours may be needed to fully charge the battery.
Make sure the battery is installed in the P-touch Label Printer.
Use the AC adapter and power supply cord to connect the P-touch
Label Printer to an AC power outlet.
Press the
(Power) button to turn the P-touch Label Printer on if it is
not on already.
The
(Battery) indicator lights in orange during charging, and it goes
off when the battery is fully charged.
1
2
1
2
3.
AC adapter
Power supply cord
1
2
Insert the power supply plug into a standard AC power outlet.
IMPORTANT
•
•
•
Turn the P-touch Label Printer off before disconnecting the AC
adapter.
Do not pull or bend the AC adapter cord and power supply cord.
After the power supply plug is inserted into the AC power outlet, it
may take a few seconds until the
(Power) button is enabled.
Using the Rechargeable Li-ion Battery
(Optional)
Attach the battery base (PA-BB-002) to the P-touch Label Printer. For more
information about attaching the battery base, see its instruction manual.
 Installing the Rechargeable Li-ion Battery
1.
2.
3.
4.
Press and hold the
off.
(Power) button to turn the P-touch Label Printer
Open the battery cover on the bottom of the P-touch Label Printer.
Insert the battery into the battery compartment.
Close the battery cover.
1
2
AC adapter
Power supply cord
NOTE
Although the charging stops if the P-touch Label Printer is used to print,
feed, or perform another operation, the charging will start again
automatically after the operation is finished if the charging is not
completed.
 Stopping Rechargeable Li-ion Battery Charging
To stop the battery charging, disconnect the AC adapter.
Notes on Using the Rechargeable Li-ion Battery
 Before use, fully charge the battery. Do not use it until it is fully charged.
 The battery charging must take place in environments between 32°F
and 104°F (0°C and 40°C), otherwise the battery will not charge, and the
(Battery) indicator will remain lit. If the charging stops because the
environment temperature is too low or too high, place the P-touch Label
Printer with a temperature between 32°F and 104°F (0°C and 40°C) and
try charging again.
 If the P-touch Label Printer is used to print, feed, or perform another
operation when both the battery is installed and the AC adapter is
connected, the
(Battery) indicator may turn off and charging may
stop even if the battery is not fully charged.
Rechargeable Li-ion Battery Characteristics
 Removing the Rechargeable Li-ion Battery
Press and hold the
(Power) button to turn the P-touch Label Printer off.
Remove the battery cover and the battery, and then reattach the battery
cover.
To ensure the highest performance and longest life from the battery:
 Do not use or store the battery in a location exposed to extreme high or
low temperatures as it may discharge more quickly. This may happen
when using a rechargeable Li-ion battery with a high charge (90%
charged or more) in a location exposed to high temperatures.
 Remove the battery when storing the P-touch Label Printer for long
periods of time.
 Store a battery with less than a 50% charge in a cool dry place out of
direct sunlight.
 Recharge the battery every six months if it is stored for long periods of
time.
 If you touch a part of the P-touch Label Printer while the Li-ion battery is
charging, that part of the P-touch Label Printer may feel warm. This is
normal, and the P-touch Label Printer may be used safely. However, if
the P-touch Label Printer becomes extremely hot, discontinue use.
Inserting a Tape Cassette
Turning Power On/Off
The TZe, HGe tape, FLe label and HSe tube cassettes can be used in your
P-touch Label Printer.
IMPORTANT
If the new tape cassette has a cardboard stopper,
be sure to remove the stopper before inserting the
cassette.
1.
Check that the end of the tape is not bent and that it passes through the
tape guide. If it does not, pass it through the tape guide as shown in the
illustration.
1
1
On: Press the
(Power) button to turn the P-touch Label Printer on. The
(Power) indicator lights in green.
Off: Press and hold the
(Power) button again to turn the P-touch Label
Printer off. The
(Power) indicator may light in orange until the power is off.
IMPORTANT
When turning the P-touch Label Printer off, do NOT remove the battery
or disconnect the AC adapter until the orange
(Power) indicator turns
off.
Connecting to a computer
PT-P900W
Basic Setup
Operating Systems
2
2
1
2
2.
3.
End of tape
Tape guides (The actual shape may be different depending on
the tape width.)
Press the cover open button to open the tape compartment cover.
Insert the tape cassette into the tape cassette compartment with the end
of the tape facing the P-touch Label Printer’s tape exit slot, then push
down evenly until the tape cassette is installed correctly.
Windows Vista /
Windows 7/
Windows 8 / 8.1
Windows 10 /
Windows Server 2008 /
2008 R2
Windows Server 2012 /
2012 R2
USB port
LAN port
r
r
–
Mac OS X v10.9.5, 10.10.x,
10.11
–
PT-P950NW
Basic Setup
Operating Systems
Windows Vista /
Windows 7/
Windows 8 / 8.1
Windows 10 /
Windows Server 2008 /
2008 R2
Windows Server 2012 /
2012 R2
1
1
Tape exit slot
IMPORTANT
•
•
•
4.
When inserting the tape cassette, make sure that the tape and ink
ribbon do not catch on the print head.
Make sure that there is no slack in
the tape, and then carefully insert
the tape cassette. If there is slack
in the tape, the tape will catch on
the protrusion (2) when the
cassette is inserted and become
bent or wrinkled, causing the tape
2
to jam.
To fix the slack in the tape, refer to
the illustration in step 1 and pull the tape outside of the tape guide.
When removing the tape cassette, make sure that the tape does not
catch on the protrusion (2).
Close the tape compartment cover.
IMPORTANT
Store tape cassettes in a cool dark location, away from direct sunlight
and high temperature, high humidity, or dusty locations. After opening
the sealed package, use the tape cassette as quickly as possible.
Serial port
(ESC/P and
P-touch
Template
only)
USB port
LAN port
Serial port
(ESC/P and
P-touch
Template
only)
r
r
r
Mac OS X v10.9.5, 10.10.x,
10.11
NOTE
The compatible operating systems may change. For the latest
information, visit our support website at support.brother.com.
–
LED Indicators
(Status)
The indicators light and flash to indicate the P-touch Label Printer status. The
symbols used in this section explain the meaning of the different indicator
colors and patterns:
(Off)
=
Indicator is lit
=
Indicator is flashing
=
Indicator can be off, lit or flashing in any color
=
Indicator is off
Example: G
G = Green
O = Orange
R = Red
(Power)
(Wi-Fi)
PT-P950NW Only:
USB host unsupported
device connection error
USB host HUB
connection error
O
(2 times in 1.8
seconds)
R
USB host power supply
excessive voltage error
(PT-P950NW Only)
R
(1 time in 1
second)
R
Mass storage error
R
(1 time in 2
seconds)
= Indicator is flashing in green
R
Roller holder error
R
Adapter error
R
Option connection error
(PT-P950NW Only)
R
(Status)
(Off)
(Power)
O
(Wi-Fi)
(Off)
Condition
During the processing of
the power-off
Idle mode
Initializing mode
(Off)
(Off)
G
Mode can be used only
when the Touch Panel
Display Unit (TDU) is
installed (includes the
error mode)
(PT-P950NW Only)
G
Tape feed and cutting
mode
G
Printing mode
G
(2 times in 1.8
seconds)
O
(Off)
O
R
R
(2 times in 1.8
seconds)
(Off)
G
(Off)
No media error
Tape end error
O
Cover open mode
O
G
Cover open error when
printing
G
G
(Off)
Receiving data
(Off)
G
Transferring data
(Off)
O
Now cooling
R
R
System error 1
System error 2
System error 3
R
R
In boot mode
O
(Off)
Reset mode (when the
mode is starting)
(Off)
O
(Off)
Reset mode (when the
button is pressed 1/3/5
times)
G
O
(Off)
Reset mode (when the
button is pressed 2/4/6
times)
(Off)
Reset mode (when reset
is confirmed)
(Off)
IP address fixed
notification (USB ID fixed
notification)
G
(Off)
Mass storage mode
G
(Off)
Mass storage processing
mode
R
G
G
(Three times)
(Off)
O
G
(One time)
O
(Three times)
GOR
(Repeat four
times)
R
(2 times in 1.8
seconds)
R
(1 time in 1
second)
O
(2 times in 1.8
seconds)
O
R
(Off)
Adapter connection error
(Off)
When blinking alternately:
Cutter error
When blinking
simultaneously:
High temperature error
O
(Off)
Non-compliant tape error
O
(Off)
Wrong media error
(Off)
Communication error
Memory full error
Number of lines/character
size error
(Off)
When blinking alternately:
Database search error
When blinking
simultaneously:
No template error
(Off)
High-resolution/draft
printing error
(Off)
Black mark not detected
error
O
O
R
(2 times in 1.8
seconds)
Condition
O
(2 times in 1.8
seconds)
O
(1 time in 1
second)
O
(2 times in 1.8
seconds)
O
Installing the Software and Printer Driver to a Computer
 Battery indicator
Condition
To print from your Windows computer or Mac, install the printer driver,
P-touch Editor and other applications to your computer.
(Off)
Rechargeable battery
power: full
Charging complete
1.
O
Charging
2.
(Battery)
(Power)
Rechargeable battery
power: half
O
(1 times in 4 seconds)
Rechargeable battery
power: low
O
(2 times in 4 seconds)
R
R
Rechargeable battery error
R
G
Rechargeable battery
power: empty
(Status)
(Power)
(Off)
O
(Off)
O
(Off)
(Off)
No available WPS access
point was found
You can connect the P-touch Label Printer to a Windows computer or Mac
using a USB cable, wireless LAN, or wired LAN. For more information, see
the User’s Guide.
WPS access point
connection error
 Connecting Using USB
R
(2 times in 1.8
seconds)
(2 times in 1.8
seconds)
Incorrect security settings
WPS access point search
error
Wi-Fi on, not connected
Wi-Fi on, connected
G
G
Connecting the P-touch Label Printer to a Computer
R
G
G
G
Wi-Fi: WPS setting mode
G
BT switching complete
notification
(PT-P950NW Only)
(Three times)
Printing Using the Computer
Available Applications for Use with Computers
Available
Applications
Close the dialog box when the installation is complete.
Condition
O
O
To connect the P-touch Label Printer to a computer using a wireless
connection, we recommend the following:
• Configure the wireless network settings while installing the software.
You can change the settings later using the Printer Setting Tool. For
more information, see the User’s Guide.
• Install the software on a computer wirelessly connected to your
network and configure the P-touch Label Printer using a USB cable.
• Get the SSID (network name) and password (network key) of the
wireless network in advance.
• If your wireless access point/router supports WPS, you can use
one-push WPS (Wi-Fi Protected Setup) to quickly configure the
wireless network settings.
(Wi-Fi)
R
O
Double-click the downloaded .exe file and follow the on-screen
instructions to proceed with the installation.
NOTE
3.
 Wi-Fi® indicator
Visit our website (install.brother) and download the installer for the
latest software and manuals.
Features
Computer
Connection
P-touch Editor Design and print custom
labels with built in drawing
tools, text using different
fonts and styles, imported
graphic images and
barcodes.
Windows /
Mac
Wi-Fi / USB /
Wired Network
Cable Label
Tool
Windows
Create and print labels for
cables, patch panels,
faceplates, electrical
equipment and more.
For more information, see the User’s Guide.
1.
2.
3.
Connect the P-touch Label Printer end of the USB cable to the USB port
on the back of the P-touch Label Printer.
Connect the other end of the USB cable to the USB port on the
computer.
Turn on the P-touch Label Printer.
 Connecting Using Wi-Fi
1.
2.
Turn on the P-touch Label Printer.
Press and hold the
(Wi-Fi) button on your P-touch Label Printer for
one second to turn the Wi-Fi function on. The
(Wi-Fi) indicator starts
flashing in green once every three seconds.
• Ad-Hoc Mode
After installing the printer driver and other applications to your
computer, set the Ad-Hoc mode using the Printer Setting Tool
installed on the computer. (See the User’s Guide.)
 Connecting Using a Wired LAN (PT-P950NW Only)
NOTE
To use a static IP address to connect your P-touch Label Printer to a
wired LAN connection, install the printer driver and Printer Setting Tool,
and then specify wired LAN connection settings.
For more information, see Installing the Software and Printer Driver to a
Computer.
1.
2.
3.
Connecting the P-touch Label Printer to a Mobile Device
1.
Before connecting the LAN cable, make sure that the P-touch Label
Printer is turned off.
Connect the LAN cable to the LAN port on the back of the P-touch Label
Printer, and then connect the other end of the LAN cable to an active
LAN port on the network.
Turn on the P-touch Label Printer.
2.
NOTE
The printer’s communication settings can be changed with
[Communication Settings] in the Printer Setting Tool.
For more information, see the User’s Guide.
Printing from the computer
There are various methods for printing with this P-touch Label Printer.
The following describes the procedure for printing from a computer using
P-touch Editor.
1.
2.
3.
3.
Select [File] then [Print] from the menu bar or by clicking the [Print]
icon.
• For Mac
Connect the P-touch Label Printer and computer with a USB cable.
Start the Printer Setting Tool on your computer, and confirm that
[WirelessDirect] is set to [On] in the [Wireless LAN] tab.
For more information, see the User’s Guide.
Press and hold the
(Wi-Fi) button on your P-touch Label Printer for
one second to turn the Wi-Fi function on.
The
(Wi-Fi) indicator starts flashing in blue once every three
seconds.
In the Wi-Fi settings screen of your mobile device, select the SSID of
the P-touch Label Printer and enter the password.
NOTE
•
Start P-touch Editor, and then open the document you want to print.
Create a label design.
Confirm the Wireless Direct settings of the P-touch Label Printer.
• For Windows
Connect the P-touch Label Printer and computer with a USB cable.
Start the Printer Setting Tool on your computer, and click the
[Communication Settings] button. Confirm that [Infrastructure and
Wireless Direct] or [Wireless Direct] is selected for [Selected
Interface] in the [General] tab.
For more information, see the User’s Guide.
•
The factory default SSID and password are as follows:
SSID: “DIRECT-*****_PT-P900W” or “DIRECT-*****_PT-P950NW” is
the last five digits of the product serial number.
(You can find the serial number label in the tape compartment of the
P-touch Label Printer.)
Password (network key): 00000000
You can connect the P-touch Label Printer to a mobile device in the
Infrastructure Mode via a wireless access point/router.
Printing from a Mobile Device
Printing Using the Mobile Device
Installing Applications for Use with Mobile Devices
You can either use your P-touch Label Printer as a stand-alone label Printer
or connect it to a mobile device. To create and print labels directly from your
mobile device, install the Brother mobile applications, and then connect your
P-touch Label Printer to your mobile device.
For more information about the mobile
applications available for your printer,
visit support.brother.com/g/d/f5f9.
1.
Start the Brother application on your mobile device.
NOTE
Make sure that the P-touch Label Printer is connected to your mobile
device.
See Installing Applications for Use with Mobile Devices.
2.
Select a label template or design.
NOTE
You can also select a label or image you designed previously, and print
it.
3.
Tap [Print] in the application menu.
Connecting the Other Interfaces (Serial
Interface/Bluetooth Interface)
You can connect the P-touch Label Printer to a barcode scanner using a
serial interface or Bluetooth interface.
For more information, see the User’s Guide.
Troubleshooting
Printing Problems
Solution
• Print labels so that barcodes are aligned with
the print head as shown below:
1
Problem
Solution
The label did not print.
• Check that text has been entered and that
the tape cassette is installed correctly with
sufficient tape remaining.
• If the tape is bent, cut off the bent section and
thread the tape through the exit slot.
• If the tape is jammed, remove the tape
cassette, and then pull out the jammed tape
and cut it. Check that the end of the tape
passes through the guide before reinstalling
the tape cassette.
The label is not printed
correctly.
Problem
Printed barcodes cannot
be read.
2
1
2
3
Windows Vista / Windows Server 2008
To display the [Quality] options, open the
printer properties by clicking the Start button
- [Control Panel] - [Hardware and Sound] [Printers], right-clicking the P-touch Label
Printer you want to set up, and then clicking
[Printing Preferences].
The ink ribbon is separated If the ink ribbon is broken, replace the tape
from the ink roller.
cassette. If not, leave the tape uncut and
remove the tape cassette, then wind the loose
ink ribbon onto the spool as shown in the figure.
1
Windows 7 / Windows Server 2008 R2
To display the [Quality] options, open the
printer properties by clicking the Start button
- [Devices and Printers], right-clicking the
P-touch Label Printer you want to set up, and
then clicking [Printing Preferences].
Spool
Windows 8 / Windows 8.1 / Windows
Server 2012 / Windows Server 2012 R2
The P-touch Label Printer • Replace the tape cassette if striped tape is
stops while printing a label.
visible, as this indicates that you have
reached the end of the tape.
• Connect the AC adapter directly to the
P-touch Label Printer, or charge the
rechargeable Li-ion battery.
The label did not get cut
automatically.
To display the [Quality] options, open the
printer properties by clicking [Control Panel]
in the [Apps] screen - [Hardware and
Sound] - [Devices and Printers],
right-clicking the P-touch Label Printer you
want to set up, and then clicking [Printing
Preferences].
Check the Cut Option setting. For more
information, see the User’s Guide.
Alternatively, when using the tape cassette,
press the
(Feed&Cut) button to feed and
cut the tape.
Windows 10
To display the [Quality] options, open the
printer properties by clicking the Start button
- [Settings] - [Devices] - [Devices and
Printers], right-clicking the P-touch Label
Printer you want to set up, and then clicking
[Printing Preferences].
A tape jam error cannot be Contact Brother customer service.
cleared despite following
the troubleshooting steps.
I want to print in higher
resolution.
The high resolution or high
speed printing setting was
specified, but an error
occurred and printing could
not be completed.
High resolution printing can be used if you are
printing from a computer,the AC adapter is
connected, and TZe laminated tape with black
ink is installed. Use the printer driver to select
the high resolution mode when printing the
labels.
As conditions for high resolution or high speed
printing, the AC adapter must be connected,
and TZe laminated tape with black ink must be
installed.
To clear the error, cancel the print job, and then
connect the AC adapter or cancel high
resolution or high speed printing.
Print head
Barcodes
Printing orientation
• Try using another scanner.
• We recommend printing the barcodes with
[Standard] selected from the [Quality]
options.
• Remove the tape cassette and reinstall it,
pressing it firmly until it locks into place.
• If the print head is dirty, clean it with a cotton
swab or optional print head cleaning cassette
(TZe-CL6).
1
3
Version Information
Problem
Solution
I do not know the version You can use the following procedure.
number of the firmware for Use 0.94" (24 mm) or 1.4" (36 mm) tape.
the P-touch Label Printer. 1 Turn your P-touch label Printer on.
2 Press and hold the
(Feed&Cut) button
for more than 10 seconds to print the report.
I want to confirm whether I Use the P-touch Update Software to confirm if
am using the latest version you have the latest version or not.
of the software.
See the User’s Guide for more information
about the P-touch Update Software.
Product Specifications
Model Name
PT-P900W
Size
Dimensions
appox. 4.65" (W) x 7.56" (D) x 5.75" (H)
(118 mm (W) × 192 mm (D) × 146 mm (H))
Weight
appox. 3.33 lb (1508 g) (without tape cassette
and batteries)
Printing
Method
Thermal Transfer
Cassette
• Brother TZe tape cassette :
0.13" (3.5 mm), 0.23" (6 mm), 0.35" (9 mm),
0.47" (12 mm), 0.70" (18 mm), 0.94" (24 mm),
1.4" (36 mm) widths
• Brother FLe label cassette :
0.82" (21 mm) × 1.77" (45 mm)
• Brother HSe tube cassette :
0.23" (5.8 mm), 0.34" (8.8 mm), 0.46" (11.7
mm), 0.69" (17.7 mm), 0.93" (23.6 mm) widths
• Brother HGe tape cassette:
0.23" (6 mm), 0.35" (9 mm), 0.47" (12 mm),
0.70" (18 mm), 0.94" (24 mm), 1.4" (36 mm)
widths
Interface
USB
Version 2.0 Full Speed
Wi-Fi
•
•
•
•
Serial
Wireless Direct: IEEE802.11n
Ad-Hoc mode: IEEE802.11b
Infrastructure mode: IEEE802.11b/g/n
WPS 2.0
RS232C (Original serial cable)
Environment
Operating
temperature/humidity
When running: between 50°F and 95°F (10°C
and 35°C) /
between 20% and 80%
Max. wet bulb temperature:
80.6°F (27°C)
Model Name
PT-P950NW
Size
Dimensions
appox. 4.65" (W) x 7.56" (D) x 5.75" (H)
(118 mm (W) × 192 mm (D) × 146 mm (H))
Weight
appox. 3.33 lb (1508 g) (without tape cassette
and batteries)
Printing
Method
Thermal Transfer
Cassette
• Brother TZe tape cassette :
0.13" (3.5 mm), 0.23" (6 mm), 0.35" (9 mm),
0.47" (12 mm), 0.70" (18 mm), 0.94" (24 mm),
1.4" (36 mm) widths
• Brother FLe label cassette :
0.82" (21 mm) × 1.77" (45 mm)
• Brother HSe tube cassette :
0.23" (5.8 mm), 0.34" (8.8 mm), 0.46" (11.7
mm), 0.69" (17.7 mm), 0.93" (23.6 mm) widths
• Brother HGe tape cassette:
0.23" (6 mm), 0.35" (9 mm), 0.47" (12 mm),
0.70" (18 mm), 0.94" (24 mm), 1.4" (36 mm)
widths
Interface
USB
Version 2.0 Full Speed
Wi-Fi
•
•
•
•
Wireless Direct: IEEE802.11n
Ad-Hoc mode: IEEE802.11b
Infrastructure mode: IEEE802.11b/g/n
WPS 2.0
Serial
RS232C (Original serial cable)
USB host
Supports only barcode scanners
LAN
10BASE-T/100BASE-TX
Bluetooth
(The Bluetooth interface (optional) is required.)
Bluetooth Ver.2.1+EDR (Class 1)
Supported profiles: SPP, OPP
Environment
Operating
temperature/humidity
When running: between 50°F and 95°F (10°C
and 35°C) /
between 20% and 80%
Max. wet bulb temperature:
80.6°F (27°C)
Brother support website
Please visit our support website at support.brother.com.
You can find following information:
• Software downloads
• Manuals/Documents
• Frequently Asked Questions (Troubleshooting, Useful tips on using printer)
• Consumable information
• Latest OS compatibility information
The contents of this website are subject to change without notice.

* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project