自主科技 自由生活
Table of Contents
Product Introduction
............................................. 2
Technical Specifications
......................................... 2
Packing List
..................................................... 3
Appearance and Assembly
....................................... 3
Front panel ......................................................................................................... 3
Back cover ......................................................................................................... 3
Bottom................................................................................................................ 4
Assembling support............................................................................................ 4
System connection ............................................................................................. 4
Buttons introduction
............................................. 6
Machine buttons ................................................................................................. 6
Remote control keys (optional) .......................................................................... 7
Introductions to Display Modes
................................... 8
1. Preset mode .................................................................................................... 8
2.Card Reading Mode ...................................................................................... 17
3.USB Working Mode...................................................................................... 17
Statement
...................................................... 19
Trademark Statement
........................................... 19
自主科技 自由生活
Product Introduction
The F5005 multimedia digital photo frame is used the 8" (8-inch) TFT-LCD panel and the multimedia technology, it has the following features: z
Rotating/zooming-in/zooming-out/moving/reviewing pictures and 9-picture reviewing (3×3) z
Automatically displaying pictures in slide show mode, supporting 13 kinds of special display effect z
Supporting the customized interval of automatic display z
Playing background music of slide show z
Supporting the digital pictures of 12 million pixel at most z
Supporting the music playing/stopping /pausing, volume adjustment and mute control z
Displaying the file name and image resolution ratio, shooting time (excluding those with no shooting time), etc. z
File management mode: Providing the copying and deletion functions z
Support MP3 player, portable hard disk equipments z
Support SD, MS pro, CF, MMC memory card z
Support USB z
Built-in Memory z
Built-in Speaker z
External side LED (optional) z
Remote control function （ Optional ）
Technical Specifications
z
Input voltage of power adapter: 100-240 VAC ~ 50-60 Hz z
Input voltage of this equipment: +5 VDC z
Power consumption: 7.5 W z
Picture format: JPEG (YUV code) 12 million pixel z
Support audio format: MP3 （ 320kbps 、 44.1kHz
） ,WMA （ 192kbps 、 44.1kHz
） z
Support video format: MJPEG, MPEG-1 （ *.mpg,*.mpeg,*.dat
） , z
MPEG-2 *.mpg,*.mpeg
），
AVI file of divx or xvid code ,MAX. resolution 720×560
， ≤
7Mbps z
Operation mode: Buttons, remote control (optional)
自主科技 自由生活 z
Resolution of Liquid Crystal Display (LCD): 800×480 z
Effective display area: 158*99.36mm
Packing List
Refer to the information on the colored box (including accessories and optional accessories).
Appearance and Assembly
Front panel
1. LCD
2. Receiving window for remote control signals (reserved)
3. Front frame decorations
4. Front frame
Figure 4.1
Back cover
5. Power switch
6. Power indicator
7. Navigation button
8. Speaker
9. “Enter” button
10. “Esc” button
11. Locker of front frame
12. Stand
Figure 4.2
自主科技 自由生活
Bottom
13. “SD/MMC/MS PRO ”card slot
14. CF card slot
15. +5V DC power jack
16. USB port
Figure 4.3
Notes :Changing the Inner Frame
The F5005 is supplied with two, interchangeable, inner frames to compliment the interior design of your home, one Multicolor and one Silver. To change the frame simply press the Frame removal button on the top of the
F5005 and carefully separate the compete frame from the screen. Next, to separate the inner frame from the outer frame, press the back of the inner frame firmly and ease the two frame apart. Now simple choose your new frame color and replace, reversing the procedure above.
Assembling support
Insert the front end of the support to the slot on the back cover, and then rotate the base as illustrated in Figure
4.4, until the support is locked properly.
Figure 4.4
System connection
Connect the power cable of the power adapter delivered with the photo frame to the power jack of the photo frame, and then connect the power adapter to the AC power socket. (See Figure 4.5.)
自主科技 自由生活
Figure 4.5
自主科技 自由生活
Buttons introduction
Machine buttons:
Up Joystick button:
1
）
Move up the cursor at the menu.
2
）
Open brightness adjustment menu at playing interface.
3
）
Switch picture control bar and music control bar (After use button “ENTER” open the control bar).
4
）
Shift up when zoom in picture.
5
）
Pageup at the first line of 9-picture thumbnail.
Down Joystick button:
1 ） Move down the cursor at the menu.
2 ） Open volume adjustment menu at playing interface.
3
）
Switch picture control bar and music control bar (After “ENTER” button open control bar).
4
）
Shift down when zoom in picture.
5
）
Pagedown at the last line of 9-picture thumbnail.
Left Joystick button:
1 ） Move left the cursor at the menu.
2
）
Back to up-level folder
（ in file list
）
.
3
）
Switch the previous file at playing interface.
4
）
Shift left when zoom in picture
（ when control bar closed
）
.
5) Pageup at the first picture of 9-picture thumbnail.
Right Joystick button:
1 ） Move right the cursor at the menu.
2 ） Back to sub-level folder （ in file list ） .
3
）
Operate copy/delete selected files.
4
）
Switch the next file at playing interface.
5
）
Shift right when zoom in picture
（ when control bar closed
）
.
6) Pagedown at the last picture of 9-picture thumbnail.
自主科技 自由生活
“ENTER” button:
1
）
Confirm perform selected item.
2
）
Open control bar at the file playing interface.
“ESC” button
：
Exit
Power switch:
Turn on or cut off the power supply. When it is on OFF, the power is off; when it is pushed upwards to ON, the power is on; when it is further pushed upwards to LED, the decorative indicators are turned on
(such indicators are optional; you need to refer to the instructions on the external package; this operation is available only when you select the decorative LED).
Remote control keys (optional)
：
Joystick
：
As same as machine Joystick.
“ENTER” key
：
Confirm perform selected item,
Open control bar at the file-playing interface.
Info
key
：
Open file information after control bar opened.
At file list interface, open operation menu after select files.
Rotation key
：
Follow clockwise or anti-clockwise direction to rotate picture.
“ESC” key
：
Exit menu or folder.
Mute key
：
Mute control.
Zoom key
：
Zoom when playing picture.
自主科技 自由生活
Volume keys
：
Adjust sound volume.
：
Not utilized.
Note ： Remote distance ≤ 5m, horizon angle ± 4 5°，vertical angle ±5°.
Introductions to Display Modes
1. Preset mode
：
After assembling support and connect adapter well, turn on the power supply without memory card inserted, to see the
“ aigo” logo interface.
Start interface will be seen on screen. According to “System Setup”(User could setup image ,music, movie, file list and calendar as start interface, default setting is calendar, Figure 6.1). User could set clock and alarm in “System
Setup”, there are three rings in system, on the other hand, we can set three personal rings. The format of personal rings should be “MP3”, the filename must be “RING1.MP3
、
RING2.MP3
、
RING3.MP3” , put them in the root directory of memory(NAND),and the personal rings will be set.
When user set image, music, or movie as start interface, system will search files according to this order: memory
SD/MMC-MS-CF-USB-NAND, if no files in these devices, system will enter the “Card select” interface after warning.
Figure 6.1
At calendar interface press the key “Enter”, it will enter the card interface.
（ Figure 6.2).
自主科技 自由生活
Figure 6.2
Select NAND icon and press “ENTER” button at the card menu, the system enter the function select interface.
(Figure 6.3).
Figure 6.3
1-1> At the function select interface, select icon, press “ENTER” button to enter picture view mode ， the picture view mode will appear by the 9-picture thumbnail mode. (Figure6.4). Press
“
Esc
”
button to return function select interface.
自主科技 自由生活
Figure 6.4
Through the Joystick you can choose one of 9-picture thumbnail, press ENTER button display selected picture. And then play the pictures which in current directory automatically, press “ESC” button to stop playing, return 9-picture thumbnail by press “ESC” button again.
During display picture, through Joystick display the previous picture or the next picture; open the brightness menus of screen figure 6.5a
, open volume menu figure 6.5b
, adjust parameters
，
“ESC” button to close the menu, it also will be closed in 5s if no operation.
(a)
(b)
Figure 6.5
During picture displaying, press “ENTER” button to open picture control bar.
（ figure 6.6
） . Press or to switch music control bar, user could play back music when display pictures. In section 1-2, we will explain the operation of music control bar. Press “ESC” button to close the menu, it also will be closed in 5s if no operation.
自主科技 自由生活
Figure 6.6
The functions of picture control bar are shown as below figure 6.7.
Status Stop
Rotate
Zoom
Previous
Show file info
Play/Pause
Picture resolution
Next
Figure 6.7
View 3 × 3
Press STOP key at control bar back to function select interface ； press “ESC” button at picture view menu back to 9-picture thumbnail.
1-2>At the function select interface, through Joystick choose music play menu
（ figure 6.8
）
.
icon ， press “ENTER” button to enter the
自主科技 自由生活
Figure 6.8
System search music files in the current memory equipment and play them automatically. During music playing, uses the control bar to perform control operation, the functions are shown as figure 6.9. Press adjust button to move the option to “play mode” ,there are three modes in this option, “standard”, “ repeat one” and “dir. repeat”, press
“ENTER” to choose one of them..
Status
Time
Stop
Play/Pause
Previous
Next
Fast backward
Fast forward
ID3 tag file info
Play mode
Figure 6.9
Press button to close control bar, press or “ENTER” button to open control bar again.
The Joystick open volume menu
（ figure 6.10
）
, use the Joystick adjust the volume, press “ENTER” button to save parameters, press “ESC” button to close the menu(don’t save parameters).
Figure 6.10
Press “ESC” button or press STOP key back to function select interface at control bar.
1-3>At the function select interface, through Joystick choose icon, press “ENTER” button to enter the movie play menu, the system will search the video files in the current memory equipment and play them automatically. During movie playing, press Joystick to open the volume menu
（
Operation as same as 1-1
）
. Pres
“ENTER/ESC” button to open/close video control bar （ figure 6.11
） .
Figure 6.11
自主科技 自由生活
The functions of video control bar are shown as figure 6.12. Under function switch, Press to switch “audio code information, play mode”, at the item of play mode , press “ENTER” to switch “standard play, repeat one, dir repeat”.
Time
Previous
Fast backward
Fast forward
Show file info Stop
Status
Play/pause
Next
Zoom
Figure 6.12
Press “ESC” button or press STOP key back to function select interface at control bar.
Function switch
1-4>At the function select interface
， through Joystick choose icon, press “ENTER” button to enter file management menu （ Figure 6.13
）， this list shows current memory equipment, press “ESC” to exit function select interface.
Figure 6.13
After use Joystick to choose memory equipment, press “ENTER” button or Joystick to view the content （ figure 6.14
） , picture files could preview on the right side.
自主科技 自由生活
Figure 6.14
You can delete or copy files at the list.
Delete file
：
button to shift cursor to target file
， press button, the left of file will appear the selected symbol “ ” （ figure6.15
， press button again to cancel selection.
Figure 6.15
User can choose multi-files to operate. （ Figure 6.16
） .
自主科技 自由生活
Figure 6.16
After you select file, long press “ENTER” button to open operation menu.
（ Figure 6.17
） .
Figure 6.17
Press button and shift cursor to icon ， press “ENTER” button to confirm, the selected files will be deleted.
（ figure 6.18
）
Press “ENTER” button return to file management menu.
Figure 6.18
Copy file
：
Press button and shift cursor to target file, press button, it will appear the selected symbol
自主科技 自由生活
“ ”
. After file select, press or ESC to exit current folder and then enter to target folder, long press “ENTER” button to open file operation menu, select icon
， the selected file will be copy to the target folder
（ figure 6.19
）
.
If the space of the memory device is not enough, error information will be shown, copy operation unsuccessful.
Figure 6.19
1-5>At the function select interface, through Joystick choose the system setup menu.
（ figure 6.20
）
.
icon
， press “ENTER” button to enter
Figure 6.20
The setup items are shown as below ：
：
Menu language setup
， it includes “Simplified Chinese”, “English” two items.
： Picture setup, it includes “the speed of automatic slide show”,” picture play mode” two items.
： Clock setup.
：
Alarm setup.
：
Set up start interface.
： Video setup, Screen brightness, contrast and color setups.
：
Default setup, recover the factory default setup.
：
Check out the information of current software version.
自主科技 自由生活
The buttons’ operation method is shown as below
：
button
： shift items or choose parameters.
or “ENTER” button ： enter the selected item, confirm the setup result. or “ESC” button
：
Back to the up-level item/the previous picture or forward to the next picture.
2.Card Reading Mode
：
After connecting the system, insert the memory card and power on the equipment. The system will display Logo which turns into the card selection interface
（ figure 6.21
）
.
Figure 6.21
Only display current memory card icon , through the Joystick selected playing memory card, press “ENTER” to enter function select interface.
3
．
USB Working Mode
：
After the USB interface of the equipment is connected to a PC (figure 6.22), the system enters the USB Slave mode.
At this time, the computer can directly operate the memory card inserted in the digital photo frame. In the automatic playing process, you need to exit from the playing after inserting the USB; only thus the USB can be connected to your PC.
自主科技 自由生活
Figure 6.22
After the USB interface of the equipment is connected to a portable memory, the system enters the USB Host mode
(as shown in figure 6.23)
图 6.23
When use “USB Host” function, USB stick and other USB equipments will be named to “ UDISK ” and appear at file list. It’s reading, operation modes are same as memory card.
Note: 1.To avoid any accident caused by insufficient USB power on your PC, make sure to power on the device before connecting to your PC.
2. Limited by the system power supply, the driving current of the peripheral USB device should be not greater than 500 mA; beyond that, external power supply is required.
自主科技 自由生活
Statement
y aigo pledges this: For the F5005 series products, the guarantee period is one year since the purchase date. For any faults caused by non-human factors in the normal use of the device, aigo provides free repair. For any faults by the human factors or after the guarantee period, aigo provides paid maintenance and relevant materials. y aigo assumes no responsibly for any damage or loss cause by the use of this user manual. y aigo assumes no responsibly for any loss cause by the use of this product by any third party. y aigo assumes no responsibly for any damage or loss resulted from the data loss caused by any fault, repair or power-off. Be sure to make backups for all important data on other media to ensure data safety. y aigo is the trademark in China. Reproduction or use by any organization or individual is prohibited unless authorized by aigo. y The product specifications and information mentioned in this manual are for your reference only. They are subject to change without further notice.
Trademark Statement
y
The product names mentioned in this manual only serve for identification, and they may be the registered trademarks or copyrights of other companies. Hence the following statement: y
SD logo is a registered trademark. y
MultiMediaCard is the trademark of Infineon Technologies AG of Germany, and it has been authorized to Multi
Media Card Association (MMCA). y The rest of the companies, products, or service names involved in this manual may all be the trademarks or service logos of the relevant holders.
If at any time in the future you should need to dispose of this product please note that: Waste electrical products should not be disposed of with household waste.
Please recycle where facilities exist. Check with your Local Authority or retailer for recycling advice. (Waste Electrical and Electronic Equipment Directive).
自主科技 自由生活
自主科技 自由生活
自主科技 自由生活
