install guide
FLC-CH(RS)-CH8-[FLRSCH7]-EN
Document number
17441
Revision Date
20141105
fiRmware
FLC-CH(RS)-CH8-[FLRSCH7]
hardware
FLRSCH7
accessories
FLPROG (REQUIRED)
FLRF1/2/4 (OPTIONAL)
CARLINK ASCL2 (OPTIONAL)
NOTICE The manufacturer will accept no responsability for any electrical
damage resulting from improper installation of this product, be that either
damage to the vehicle itself or to the installed device. This device must be installed by a certified technician. Please review the Installation Guide carefully
before beginning any work.
U.S. Patent No. 8,856,780
Automotive Data Solutions Inc. © 2014
BEFORE INSTALLATION
1- Connect module to computer
2- Login to Weblink account
3- Flash firmware to module (module is not preloaded with firmware)
4- Use accessories accordingly (accessories are sold separately)
www.flashlogic.com
Page 2 of 22
DOC.: #17441 • 20141105
VEHICLE LIST - 1 OF 1
RAM
SECURE TAKEOVER
•
•
•
•
•
•
•
•
•
•
•
RAP SHUTDOWN CTRL
TACHOMETER OUTPUT
•
BRAKE PEDAL STATUS OUTPUT
DOOR UNLOCK
•
TRUNK STATUS OUTPUT
DOOR LOCK
•
DOOR STATUS OUTPUT
DATA IMMOBILIZER BYPASS
1
TRUNK/HATCH RELEASE
INSTALL TYPE
13
DISARM OEM ALARM
YEAR
Dart STD key (Tip-Start) AT (without Autolight)
ARM OEM ALARM
MODEL
DODGE
MAKE
I WARNING: All vehicle doors must be
closed and locked prior to remote start
sequence.
GLOW PLUGS STATUS
FEATURES
NOTE
•
Dart STD key (Tip-Start) AT (with Autolight)
13
2
•
•
•
•
•
•
•
•
•
1500 STD key (Tip-Start) AT
13-14 3
•
•
•
•
•
•
•
•
•
•
1500 Diesel STD key (Tip-Start) AT
14
3
•
•
•
•
•
•
•
•
•
2500 / 3500 STD key (Tip-Start) AT
13-14 3
•
•
•
•
•
•
•
•
•
2500 / 3500 Diesel STD key (Tip-Start) AT
14
•
•
•
•
•
•
•
•
•
U.S. Patent No. 8,856,780
Automotive Data Solutions Inc. © 2014
FLC-CH(RS)-CH8-[FLRSCH7]-EN
3
•
•
•
•
•
www.flashlogic.com
Page 3 of 22
DOC.: #17441 • 20141105
BOX CONTENTS - 1 OF 1
BOX CONTENTS
MODULE
LED 2
BLUE
2
4
6
1
3
5
BLACK
2
4
6
8
10
12
14
16
18
20
1
3
5
7
9
11
13
15
17
19
2
4
6
8
10
12
1
3
5
7
9
11
BLACK
10 PIN CONNECTOR
T-HARNESS 1
PROGRAMMING
BUTTON
LED 1
A
G
F
B
E
4
3
2
1
BLACK
RF PORT/
WEBLINK PORT
4
3
2
1
BLUE
TELEMATIC
PORT
3
2
1
BLACK
MS2
VS2
12 PIN CONNECTOR
VS1
MS1
AFTERMARKET HOOD SWITCH AND CABLE
C
D
9 10
7 8
5 6
3 4
1 2
WHITE
WARNING STICKER
WEBLINK CABLE (required accessory sold separately)
WEBLINK CABLE
MODULE
WEBLINK PORT
COMPUTER
USB PORT
4 PIN BLACK CABLE
U.S. Patent No. 8,856,780
Automotive Data Solutions Inc. © 2014
FLC-CH(RS)-CH8-[FLRSCH7]-EN
www.flashlogic.com
Page 4 of 22
DOC.: #17441 • 20141105
COMPATIBLE ACCESSORIES - 1 OF 1
RF KIT (accessories sold separately)
FLRF1/2/4 RF KIT
(NC)
MODULE
RF PORT
ANTENNA
TELEMATIC KIT (accessories sold separately)
CARLINK
FLHRNTM
MODULE
TELEMATIC PORT
(NC)
TELEMATIC KIT (accessories sold separately)
FLHRNTM
PN 4120260
MODULE
TELEMATIC PORT
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
VEHICLE
OBDII PORT
(NC)
U.S. Patent No. 8,856,780
Automotive Data Solutions Inc. © 2014
OBDII CONNECTOR
CAR CONNECTION
FLC-CH(RS)-CH8-[FLRSCH7]-EN
www.flashlogic.com
Page 5 of 22
DOC.: #17441 • 20141105
U.S. Patent No. 8,856,780
Automotive Data Solutions Inc. © 2014
POLARITY
MODULE
LOCATION
COMPONENT
LOCATOR
~
White
06 pin
06 Red
(+)
Ignition connector
F
~
White
06 pin
03 Black
(-)
Ignition connector
F
Ignition
~
White
06 pin
04 Purple/Brown
(+)
Ignition connector
F
Imo Lin
~
White
06 pin
05 White/Green
(DATA)
Ignition connector
F
CanH
~
Black
16 pin
06 Gray/White
(DATA)
OBDII connector
~
CanL
~
Black
16 pin
14 Yellow
(DATA)
OBDII connector
~
Parking Light
~
Black
06 pin
03 White/Brown
(MUX)
Parking light switch
A
Rap Shutdown
~
~
~
~
(-)
Driver kick panel harness
B
WIRE
COLOR
POSITION
12V
Ground
CONNECTOR
NAME
CONNECTOR
TYPE
13
WIRE
DESCRIPTION
YEAR
MODEL
Dart
STD key
AT
(without
Autolight)
CONNECTOR
COLOR
DODGE
MAKE
TYPE 1 - WIRE CHART - 1 OF 1
Purple
FLC-CH(RS)-CH8-[FLRSCH7]-EN
www.flashlogic.com
Page 6 of 22
DOC.: #17441 • 20141105
TYPE 1 - WIRING DIAGRAM - 1 OF 1
MODULE
IGNITION NODE
A1
VS2
A
G RF PORT/WEBLINK PORT
B
F TELEMATIC PORT
IGNITION CONNECTOR
E
C
A2
D
VS1
IGNITION HARNESS
A
2
4
6
1
3
5
2
4
6
8
10
12
14
16
18
20
1
3
5
7
9
11
13
15
17
19
MS2
B
OBDII CONNECTOR
OBDII
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
PARKING LIGHT SWITCH
WHITE/BLACK - GROUND (-)
WHITE/BROWN (NC)
WHITE/RED (NC)
WHITE
C
2 1
4 3
6 5
8 7
10 9
12 11
CANH - 06
CANL - 14
BROWN/RED
BROWN/YELLOW
MS1
BLACK
B
2K
6
PARKING LIGHT (MUX) - 03
5
4
3
2
1
02 GRAY - RAP SHUTDOWN (-) OUTPUT
DRIVER KICK PANEL
C
11 GRAY/GREEN - HORN (-) OUTPUT
RAP SHUTDOWN (-)
HARNESS
D
2
4
6
8
10
1
3
5
7
9
04 GRAY/WHITE - HOOD STATUS (-) INPUT
WITHOUT OEM HOOD SWITCH:
INSTALL AND CONNECT TO
AFTERMARKET HOOD SWITCH
OPTIONAL
HORN (-)
AFTERMARKET HOOD SWITCH (-)
U.S. Patent No. 8,856,780
Automotive Data Solutions Inc. © 2014
FLC-CH(RS)-CH8-[FLRSCH7]-EN
www.flashlogic.com
Page 7 of 22
DOC.: #17441 • 20141105
U.S. Patent No. 8,856,780
Automotive Data Solutions Inc. © 2014
POLARITY
MODULE
LOCATION
COMPONENT
LOCATOR
~
White
06 pin
06 Red
(+)
Ignition connector
F
~
White
06 pin
03 Black
(-)
Ignition connector
F
Ignition
~
White
06 pin
04 Purple/Brown
(+)
Ignition connector
F
Imo Lin
~
White
06 pin
05 White/Green
(DATA)
Ignition connector
F
CanH
~
Black
16 pin
06 Gray/White
(DATA)
OBDII connector
~
CanL
~
Black
16 pin
14 Yellow
(DATA)
OBDII connector
~
Parking Light
~
Black
06 pin
03 White/Brown
(MUX)
Parking light switch
A
Rap Shutdown
~
~
~
~
(-)
Driver kick panel harness
B
Autolight Off
~
Black
06 pin
06 White/Yellow
(MUX)
Parking light switch
A
WIRE
COLOR
POSITION
12V
Ground
CONNECTOR
NAME
CONNECTOR
TYPE
13
WIRE
DESCRIPTION
YEAR
MODEL
Dart
STD key
AT
(with
Autolight)
CONNECTOR
COLOR
DODGE
MAKE
TYPE 2 - WIRE CHART - 1 OF 1
Purple
FLC-CH(RS)-CH8-[FLRSCH7]-EN
www.flashlogic.com
Page 8 of 22
DOC.: #17441 • 20141105
TYPE 2 - WIRING DIAGRAM - 1 OF 1
MODULE
IGNITION NODE
A1
VS2
A
G RF PORT/WEBLINK PORT
B
F TELEMATIC PORT
IGNITION CONNECTOR
E
C
A2
D
VS1
IGNITION HARNESS
A
2
4
6
1
3
5
MS2
OBDII CONNECTOR
B
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
OBDII
2
4
6
8
10
12
14
16
18
20
1
3
5
7
9
11
13
15
17
19
CANH - 06
CANL - 14
BROWN/RED
BROWN/YELLOW
PARKING LIGHT SWITCH
MS1
BLACK
B
WHITE/BLACK - VEHICLE SIDE
WHITE/BROWN (NC)
WHITE/RED - CONNECTOR SIDE
6
PARKING LIGHT (MUX) - 03
5
4
3
2
1
1000 OHMS
AUTOLIGHT OFF - 06
WHITE
C
DRIVER KICK PANEL
2 1
4 3
6 5
8 7
10 9
12 11
C
02 GRAY - RAP SHUTDOWN (-) OUTPUT
RAP SHUTDOWN (-)
HARNESS
11 GRAY/GREEN - HORN (-) OUTPUT
D
2
4
6
8
10
1
3
5
7
9
04 GRAY/WHITE - HOOD STATUS (-) INPUT
WITHOUT OEM HOOD SWITCH:
INSTALL AND CONNECT TO
AFTERMARKET HOOD SWITCH
OPTIONAL
HORN (-)
AFTERMARKET HOOD SWITCH (-)
U.S. Patent No. 8,856,780
Automotive Data Solutions Inc. © 2014
FLC-CH(RS)-CH8-[FLRSCH7]-EN
www.flashlogic.com
Page 9 of 22
DOC.: #17441 • 20141105
U.S. Patent No. 8,856,780
Automotive Data Solutions Inc. © 2014
POLARITY
MODULE
LOCATION
COMPONENT
LOCATOR
D2664A
Black
06 pin
06 Red
(+)
Ignition connector
F
D2664A
Black
06 pin
03 Black
(-)
Ignition connector
F
Mux
D2664A
Black
06 pin
04 Purple/Brown
(+)
Ignition connector
F
Ignition
~
Gray
04 pin
02 Pink/Green
(+)
Trailer pack connector, right of steering
~
D2664A
Black
06 pin
05 White/Green
(DATA)
Ignition connector
F
CanH
D7405A
Black
16 pin
06 Gray/White
(DATA)
OBDII connector
~
CanL
D7405A
Black
16 pin
14 Yellow
(DATA)
OBDII connector
~
Parking Light
D2242A
Black
10 pin
01 White/Brown
(MUX)
Parking light switch
A
Rap Shutdown
~
~
~
~
(-)
Driver kick panel harness
B
12V
D2664A
Black
06 pin
06 Red
(+)
Ignition connector
F
Ground
D2664A
Black
06 pin
03 Black
(-)
Ignition connector
F
Mux
D2664A
Black
06 pin
04 Purple/Brown
(+)
Ignition connector
F
Ignition
~
Gray
04 pin
02 Pink/Green
(+)
Trailer pack connector, right of steering
~
D2664A
Black
06 pin
05 White/Green
(DATA)
Ignition connector
F
CanH
D7405A
Black
16 pin
06 Gray/White
(DATA)
OBDII connector
~
CanL
D7405A
Black
16 pin
14 Yellow
(DATA)
OBDII connector
~
Parking Light
D2242A
Black
10 pin
01 White/Brown
(MUX)
Parking light switch
A
Rap Shutdown
~
~
~
~
(-)
Driver kick panel harness
B
13-14 Imo Lin
13-14 Imo Lin
WIRE
COLOR
12V
Ground
CONNECTOR
NAME
POSITION
WIRE
DESCRIPTION
CONNECTOR
TYPE
2500 /
2500 Diesel /
3500 /
3500 Diesel
STD key
AT
CONNECTOR
COLOR
RAM
1500 /
1500 Diesel
STD key
AT
YEAR
MODEL
MAKE
TYPE 3 - WIRE CHART - 1 OF 1
Purple
Purple
FLC-CH(RS)-CH8-[FLRSCH7]-EN
www.flashlogic.com
Page 10 of 22
DOC.: #17441 • 20141105
TYPE 3 - WIRING DIAGRAM - 1 OF 1
MODULE
IGNITION NODE
A1
VS2
A
G RF PORT/WEBLINK PORT
B
F TELEMATIC PORT
IGNITION CONNECTOR
E
C
A2
D
VS1
IGNITION HARNESS
A
2
4
6
1
3
5
MS2
B
OBDII CONNECTOR
OBDII
2
4
6
8
10
12
14
16
18
20
1
3
5
7
9
11
13
15
17
19
CANH - 06
CANL - 14
BROWN/RED
BROWN/YELLOW
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
MS1
PARKING LIGHT SWITCH
B
WHITE/BLACK (NC)
WHITE/BROWN
WHITE/RED (NC)
WHITE (NC)
BLACK
PARKING LIGHT (MUX) - 01
1 2 3 4 5
6 7 8 9 10
C
DRIVER KICK PANEL
2 1
4 3
6 5
8 7
10 9
12 11
C
02 GRAY - RAP SHUTDOWN (-) OUTPUT
RAP SHUTDOWN (-)
HARNESS
11 GRAY/GREEN - HORN (-) OUTPUT
D
2
4
6
8
10
1
3
5
7
9
04 GRAY/WHITE - HOOD STATUS (-) INPUT
WITHOUT OEM HOOD SWITCH:
INSTALL AND CONNECT TO
AFTERMARKET HOOD SWITCH
OPTIONAL
HORN (-)
AFTERMARKET HOOD SWITCH (-)
U.S. Patent No. 8,856,780
Automotive Data Solutions Inc. © 2014
FLC-CH(RS)-CH8-[FLRSCH7]-EN
www.flashlogic.com
Page 11 of 22
DOC.: #17441 • 20141105
MODULE PROGRAMMING PROCEDURE - 1 OF 2
01
Close driver door. Re-open driver door to wake
up data bus.
07
ACC
03
Press Unlock on OEM remote. If the vehicle is
not equipped with an OEM remote, press the
module programming button.
08
Wait, LED will flash GREEN once [1x].
09
ACC
ACC
10
Wait, LED will turn solid RED.
11
05
ACC
WARNING: Do not press module programming
button. Connect power first. Connect module
to vehicle.
Turn key to ON position.
15
ON
START
ACC
OFF
Turn key to OFF position.
ACC
OFF
14
Turn key to ON position.
ACC
ON
START
OFF
Wait, LED will flash GREEN.
16
Turn key to OFF position.
17
Wait, LED will turn solid GREEN for 2 seconds.
START
OFF
06
Insert key into ignition.
START
OFF
Turn key to ON position.
ON
Connect module to computer and proceed
with extended programming.
ON
OFF
04
13
START
OFF
02
Remove key.
ON
ON
START
U.S. Patent No. 8,856,780
Automotive Data Solutions Inc. © 2014
12
ON
START
Turn key to OFF position.
ACC
ON
START
OFF
WARNING: Disconnect power last. Disconnect
module from vehicle.
18
Turn key to START position.
ACC
OFF
FLC-CH(RS)-CH8-[FLRSCH7]-EN
ON
START
www.flashlogic.com
MODULE PROGRAMMING PROCEDURE - 2 OF 2
19
Turn key to OFF position.
ACC
OFF
20
Page 12 of 22
DOC.: #17441 • 20141105
ON
START
Module Programming Procedure completed.
U.S. Patent No. 8,856,780
Automotive Data Solutions Inc. © 2014
FLC-CH(RS)-CH8-[FLRSCH7]-EN
www.flashlogic.com
VALET MODE PROGRAMMING PROCEDURE - 1 OF 1
>>
01
ACC
06
Insert key into ignition.
07
Valet Mode Programming Procedure
completed.
Time restriction. Complete next step within 7
seconds.
>>
To exit valet mode: repeat steps 1 to 6.
Remove key.
ACC
OFF
ON
START
ON
START
OFF
02
03
NOTE: In Valet Mode, the Remote starter is not
functional. Keyless entry, Lock and Unlock will
remain functional. See RF kit user manual for
alternate valet mode programming.
Page 13 of 22
DOC.: #17441 • 20141105
Turn key to OFF position then to ON position
five times [5x] rapidly.
5x
ACC
ON
START
OFF
04
Wait, LED 1 will turn solid RED for 2 seconds.
05
Turn key to OFF position.
ACC
OFF
ON
START
U.S. Patent No. 8,856,780
Automotive Data Solutions Inc. © 2014
FLC-CH(RS)-CH8-[FLRSCH7]-EN
www.flashlogic.com
aFteRmaRKet Remote PRogRamming - 1 OF 1
Page 14 of 22
DOC.: #17441 • 20141105
aFteRmaRKet Remote PRogRamming:
notes
I All aftermarket remotes must be programmed to the
RF-Kit.
Refer to the RF-Kit user guide for aftermarket remote
features and programming procedures.
U.S. Patent No. 8,856,780
Automotive Data Solutions Inc. © 2014
FLC-CH(RS)-CH8-[FLRSCH7]-EN
www.flashlogic.com
Page 15 of 22
DOC.: #17441 • 20141105
MODULE NAVIGATION PROCEDURE - 1 OF 1
>>
It is mandatory to exit the Module Navigation
at the end of this procedure. Failure to exit the
Module Navigation will drain vehicle battery.
To exit the Module Navigation at any time:
Follow STEP 13.
04
>>
Module must be programmed to the vehicle.
05
>>
Use the Module Navigation Chart on the next
page.
06
Set ignition to OFF position.
07
TO ACCESS THE MENUS: Press and hold
programming button until LED 1 turns solid
GREEN.
08
IN THE MENUS: Press the programming
button as many times as the menu number
indicates. LED 1 will flash GREEN an equal
amount of times continuously.
09
01
ACC
ON
START
OFF
02
03
[X]
U.S. Patent No. 8,856,780
Automotive Data Solutions Inc. © 2014
TO ACCESS THE OPTIONS: Press and hold
programming button until LED 1 turns solid
RED.
10
IN THE OPTIONS: Press the programming
button as many times as the option number
indicates. LED 1 will flash RED an equal
amount of times continuously.
11
TO ACCESS THE SETTINGS: Press and hold
programming button until LED 1 turns solid
GREEN.
12
Configure every other setting and proceed to
step 13.
[Z]
LED 1 will flash GREEN as many times as
the current (or default) setting number,
continuously.
13
MANDATORY: EXIT MODULE NAVIGATION.
Press and hold programming button for 7
seconds. LED 1 will flash RED rapidly. Release
programming button. LED 1 will turn OFF.
[Z]
IN THE SETTINGS: Press the programming
button as many times as necessary to access
your setting. LED 1 will flash GREEN an equal
amount of times continuously.
14
Module navigation completed.
To return to the MENUS: exit the Module
Navigation and redo the Module Navigation
Procedure.
>>
Failure to exit the Module Navigation will drain
vehicle battery.
[Y]
FLC-CH(RS)-CH8-[FLRSCH7]-EN
To save and return to the OPTIONS: Press and
hold programming button until LED 1 turns
solid RED.
[Y]
LED 1 will flash RED as many times as the
current option number continuously.
www.flashlogic.com
Page 16 of 22
DOC.: #17441 • 20141105
[Y] oPtions
[X] menus
moDuLe navigation chaRt:
notes
I Default settings are listed in bold.
01
II Make sure the option is covered on the vehicle before
attempting to change the setting.
02
03
01
[Z] settings
moDuLe navigation chaRt - 1 OF 2
CONFIGURATION
DISARM/UNLOCK BEFORE START
RELOCK AFTER START
RELOCK AFTER SHUTDOWN
01
oFF
02
ON
01
oFF
02
ON
01
oFF
02
ON
01
oFF
02
ON
01
enabLe
02
DISABLE*
04
FORCE UNLOCK ALL ON FIRST PRESS
05
TAKEOVER
06
N/A
01
N/A
07
N/A
01
N/A
01
03 MIN
02
05 MIN
03
10 MIN
04
15 MIN
05
25 MIN
06
30 MIN
07
35 MIN
08
15 min
01
02 sec
02
05 SEC
03
08 SEC
04
10 SEC
05
15 SEC
06
20 SEC
07
25 SEC
08
30 SEC
08
09
MODULE RUN TIME
WAIT TO START DELAY
10
N/A
01
N/A
11
N/A
01
N/A
12
N/A
01
N/A
13
N/A
01
N/A
*Vehicle will shutdown when a door is opened.
U.S. Patent No. 8,856,780
Automotive Data Solutions Inc. © 2014
FLC-CH(RS)-CH8-[FLRSCH7]-EN
www.flashlogic.com
Page 17 of 22
DOC.: #17441 • 20141105
[Y] oPtions
[X] menus
moDuLe navigation chaRt:
notes
14
01
[Z] settings
moDuLe navigation chaRt - 2 OF 2
HORN EVENT TRIGGER
CONFIGURATION
15
02-07 Technical Support only
01
HORN CHIRPS WIDTH
N/A
01
DoubLe LocK
02
LOCK + UNLOCK
03
LOCK + UNLOCK + START
04
DOUBLE LOCK + START
01
30 msec
02
15 mSec
03
60 mSec
01
N/A
*Vehicle will shutdown when a door is opened.
U.S. Patent No. 8,856,780
Automotive Data Solutions Inc. © 2014
FLC-CH(RS)-CH8-[FLRSCH7]-EN
www.flashlogic.com
[X] numbeR oF
PaRKing Light
FLashes
Diagnostic
Remote staRteR eRRoR coDes - 1 OF 1
I WARNING: The following applies only when the parking
lights are connected and supported by the system.
03
Foot brake is ON.
04
Hood is open.
II After a remote starter failure, the parking lights will flash
[X] number times to indicate an error code. See table.
05
Engine tach signal is lost.
06
System is in Valet Mode.
07
Vehicle is moving (VSS).
08
Glow plug timeout error.
09
RS not synchronized. Start vehicle with OEM key for 15 sec before trying a new RS sequence.
10
N/A
11
N/A
12
N/A
13
N/A
14
N/A
15
N/A
16
CAN communication failure during RS sequence.
Remote staRteR eRRoR coDes:
notes
U.S. Patent No. 8,856,780
Automotive Data Solutions Inc. © 2014
FLC-CH(RS)-CH8-[FLRSCH7]-EN
Page 18 of 22
DOC.: #17441 • 20141105
www.flashlogic.com
I
II
III
DURING PROGRAMMING
DURING REMOTE START
WITH IGNITION OFF
U.S. Patent No. 8,856,780
Automotive Data Solutions Inc. © 2014
Diagnostic
test moDuLe
LeD 1 status
moDuLe Diagnostics - 1 OF 1
Flashing RED
Missing/wrong information from firmware or vehicle.
Solid RED
Module waiting for more vehicle information.
Flashing GREEN
Additional steps required to complete module programming.
Solid GREEN then OFF
Module correctly programmed.
OFF
No activity or module already programmed.
Flashing RED
Module incorrectly programmed.
Solid RED
Module incorrectly programmed.
Flashing GREEN
Module correctly programmed and operational.
Solid GREEN then OFF
Reset in progress.
OFF
Invalid ground when running status from remote starter.
Flashing RED
Module incorrectly programmed or connected.
Solid RED
Module not programmed. Waiting for more vehicle information.
Flashing GREEN
False ground when running status from remote starter.
Solid GREEN then OFF
Reset in progress.
OFF
Module at rest and ready for a remote start sequence.
FLC-CH(RS)-CH8-[FLRSCH7]-EN
Page 19 of 22
DOC.: #17441 • 20141105
www.flashlogic.com
MODULE RESET PROCEDURE - 1 OF 1
01
Disconnect all connectors from module except
the BLACK 20-PIN connector.
07
Reconnect all connectors.
02
Disconnect the BLACK 20-PIN connector.
08
Repeat programming procedure.
03
PRESS AND HOLD programming button while
connecting the BLACK 20-PIN connector.
>>
Failure to follow procedure may result with a
DTC or a CHECK ENGINE error message.
04
Wait, LED 1 will flash RED. RELEASE
programming button.
05
LED 1 will turn RED for 2 seconds.
06
Module RESET completed.
U.S. Patent No. 8,856,780
Automotive Data Solutions Inc. © 2014
FLC-CH(RS)-CH8-[FLRSCH7]-EN
Page 20 of 22
DOC.: #17441 • 20141105
www.flashlogic.com
TAKEOVER PROCEDURE - STD KEY - 1 OF 1
>>
All vehicle doors must be closed and locked
prior to remote start sequence.
01
Press unlock on OEM or aftermarket remote.
02
>>
Page 21 of 22
DOC.: #17441 • 20141105
Failure to follow procedure will result in
vehicle engine shutdown.
Insert key into ignition.
ACC
ON
START
OFF
03
Turn key to ON position.
ACC
OFF
ON
START
04
Press and release BRAKE pedal.
05
Take over procedure completed.
U.S. Patent No. 8,856,780
Automotive Data Solutions Inc. © 2014
FLC-CH(RS)-CH8-[FLRSCH7]-EN
www.flashlogic.com
instaLLation checKList - 1 OF 1
Page 22 of 22
DOC.: #17441 • 20141105
checKList
1
WARNING: Vehicle engine will start many times. Test in a well ventilated area.
2
Close all vehicle doors, hood and trunk.
3
Press the LOCK button once [1x] on the aftermarket keyfob.
9
Press the START/STOP button once [1x] on the aftermarket keyfob to shut down vehicle.
Question 7: Does the vehicle shut down?
Question 1: Do the doors lock?
¨
YES: Go to next step.
¨
NO: Repeat step. If problem persists, press the brake pedal once [1x] to shut down the vehicle
and call technical support.
RAP and auto light shutdown test
¨
YES: Go to next step.
NO: Verify the remote programming, the RF connections and the wired door lock/unlock
connections as illustrated in the wiring diagram, if applicable. Repeat the test and call
technical support, if the problem persists.
10
¨
4
Press the UNLOCK button once [1x] on the aftermarket keyfob.
¨
YES: Go to next step.
¨
NO: Verify the RAP SHUTDOWN connections as illustrated in the wiring diagram. Repeat the
test and call technical support if the problem persists.
Question 2: Do the doors unlock?
Question 8: Did the radio, interior controls and headlights turn off within 60 seconds after
remote start shutdown?
¨
YES: Go to next step.
NO: Verify the remote programming, the RF connections and the wired door lock/unlock
connections as illustrated in the wiring diagram, if applicable. Repeat the test and call
technical support, if the problem persists.
11
Open hood.
¨
12
If not already installed, affix the mandatory orange warning sticker under the hood and
proceed to next step.
5
Press the TRUNK release button once [1x] on the aftermarket keyfob if supported.
13
Press the START/STOP button once [1x] on the aftermarket keyfob to remote start vehicle.
Question 3: Does the trunk or hatch open/unlock?
Question 9: Does the vehicle remote start?
¨
YES: Close trunk or hatch and go to next step.
¨
NO: Verify the remote programming, the RF connections and the wired trunk/hatch
connections as illustrated in the wiring diagram, if applicable. Repeat the test and call
technical support, if the problem persists.
Press the AUX 1 button once [1x] on the aftermarket keyfob if supported.
15
Enter vehicle and close the doors.
Question 4: Does the driver side sliding door open?
16
Press the START/STOP button once [1x] on the aftermarket keyfob to remote start vehicle.
¨
YES: Press the AUX 1 button once [1x] to close the driver sliding door and go to next step.
17
Wait for the vehicle to start.
¨
NO: Verify the remote programming and the RF connections. Repeat the test and call
technical support, if the problem persists.
18
Press brake pedal.
7
Press the AUX 2 button once [1x] on the aftermarket keyfob if supported.
¨
YES: Go to next step.
6
¨
YES: The vehicle is not equipped with a factory hood pin. Install a mandatory aftermarket hood
switch, then repeat the test.
¨
NO: Go to next step.
14
Close hood.
Question 10: Does the vehicle shut down?
Question 5: Does the passenger side sliding door open?
¨
YES: Press the AUX 2 button once [1x] to close the passenger sliding door and go to next step.
¨
¨
NO: Verify the remote programming and the RF connections. Repeat the test and call
technical support, if the problem persists.
NO: The module does NOT detect the brake pedal signal. Press the START/STOP button once
[1x] on the aftermarket keyfob to shut down vehicle, check connection as illustrated in the
wiring diagram, if applicable, and call technical support.
19
Exit vehicle.
8
Press the START/STOP button once [1x] on the aftermarket keyfob to remote start vehicle.
20
Installation checklist completed.
Question 6: Does the vehicle remote start?
¨
YES: Go to next step.
¨
NO: Verify the remote programming, the RF connections and check the remote start error
codes. Repeat the test and call technical support, if the problem persists.
U.S. Patent No. 8,856,780
Automotive Data Solutions Inc. © 2014
FLC-CH(RS)-CH8-[FLRSCH7]-EN
www.flashlogic.com
">
