Puregas P550W Series, P550WH, P550WLP, P552WLP User Manual
Reklam
Reklam
P550W Series Air Dryers
User’s Guide
Models covered:
P550W P550WH P550WLP P552W P552WH P552WLP
P011658 – Rev. P
PUREGAS, LLC P550W Series Air Dryers User’s Guide
1. Welcome & Congratulations
Congratulations on your purchase of a new PUREGAS P550W Series Air Dryer! We here at PUREGAS are very proud of our products and we are committed to providing you with the best value and service possible.
We are sure that you will be satisfied with your new air Dryer and would like to thank you for choosing PUREGAS for your Air Dryer requirements. We also hope that you will continue to choose us for your future air pressure and related product purchases.
For information about this and other PUREGAS products, please visit us on the web at:
www.puregas.com
2. Introduction
PLEASE READ THIS USER’S GUIDE THOROUGHLY AND SAVE FOR
FUTURE REFERENCE.
This User’s Guide is provided for the benefit of our customers and contains information and direction specific to the PUREGAS P550W Series Air Dryers. Models covered include P550W, P550WH, P550WLP, P552W, P552WH, and P552WLP. This guide covers topics including: safety, specifications, installation, registration, operation, testing, maintenance, replacement parts, service, and troubleshooting issues. Observation and compliance with this User’s Guide will ensure the maximum life and efficiency of your air Dryer.
This User’s Guide should be read thoroughly prior to installing, operating, or servicing the air Dryer in order to become familiar with the recommended procedures. This will minimize the possibility of personal injury or damage to the unit due to improper operation or handling.
Page 3 of 99 P011658 – Rev. P
PUREGAS, LLC
3. Table of Contents
P550W Series Air Dryers User’s Guide
1. Welcome & Congratulations .......................... 3
2. Introduction ..................................................... 3
3. Table of Contents ............................................. 4
4. Safety & Warning Information ...................... 6
5. Overview & Specifications .............................. 8
5.1 Product Description .................................... 8
5.2 Key Features ............................................... 8
5.3 P550W Series Air Dryer Models ................ 8
5.4 Technical Specifications ............................. 9
5.5 Dryer Function Overview ......................... 10
6. Installing Your Dryer .................................... 11
6.1 Safety & Warning Information ................. 11
6.2 Before You Begin ..................................... 12
6.3 Included Contents ..................................... 13
6.4 Required Tools and Materials ................... 13
6.5 Installation Steps ....................................... 14
6.6 Installation Checklist ................................ 23
7. Registering Your Dryer................................. 23
8. Operating Your Dryer .................................. 24
8.1 Safety & Warning Information ................. 24
8.2 Connecting Air Supply Lines to the Dryer 25
8.3 Depressurizing the Dryer .......................... 26
8.4 Powering the Dryer ON & OFF ................ 26
8.5 Using the Front Panel Display .................. 27
8.6 Identifying Dryer Alarms ......................... 29
8.7 Adjusting & Resetting Dryer Set Points ... 31
8.8 Open Panel ................................................ 39
8.9 Setting the System Pressure ...................... 39
8.10 Setting the Static Pressure ...................... 40
8.11 Setting the Outlet Pressure ...................... 40
8.12 Connecting to Common Alarm
Terminals ........................................................ 41
8.13 Connecting to Power Fail Alarm
Terminals ........................................................ 42
8.14 Connecting via Web Browser ................. 43
8.15 Using the Status Screen .......................... 45
8.16 Using the Config Screen ......................... 48
8.17 Using the Event Screen ........................... 51
8.18 Using the Alarm Screen .......................... 52
8.19 Using the Firmware Screen ..................... 53
8.20 Connecting via SNMP ............................ 55
9. Testing Your Dryer ....................................... 56
9.1 Safety & Warning Information ................. 56
9.2 Measuring Compressor Amp Draw .......... 57
9.3 Measuring Compressor Voltage ............... 58
9.4 Measuring Incoming Voltage ................... 60
9.5 Measuring Voltage from AC Step-Down
Transformer .................................................... 61
9.6 Testing Consistent Heatless Dryer
Cycling............................................................ 62
9.7 Testing Unloader Valve ............................ 64
9.8 Measuring Heatless Dryer Solenoid
Voltage............................................................ 65
9.9 Testing Air Dryer Fan ............................... 66
9.10 Testing Compressor ON/OFF Cycling ... 66
9.11 Testing High Compressor Last Run
Time Alarm ..................................................... 68
9.12 Testing Humidity Alarm and System
Shutdown ........................................................ 69
9.13 Testing High Outlet Pressure Alarm ....... 71
9.14 Testing Low Outlet Pressure Alarm........ 72
9.15 Testing Air Fittings & Hoses for Leaks .. 73
10. Maintaining Your Dryer ............................. 74
10.1 Safety & Warning Information ............... 74
Page 4 of 99 P011658 – Rev. P
PUREGAS, LLC
10.2 Six Month Maintenance .......................... 76
10.3 8,000 Hour Maintenance ........................ 77
11. Replacement Parts & Accessories .............. 78
11.1 Dryer Parts .............................................. 78
11.2 Dryer Parts cont. ..................................... 79
11.3 Heatless Dryer Assembly Parts............... 80
11.4 Accessories for Your Dryer .................... 81
11.5 Ordering Parts from PUREGAS ............. 82
12. Service & Repair.......................................... 83
12.1 Services Offered ..................................... 83
12.2 Initiating a Service Transaction .............. 83
13. Troubleshooting Your Dryer ...................... 84
13.1 Before You Call PUREGAS ................... 84
13.2 Safety & Warning Information ............... 84
13.3 Air Dryer Won’t Power ON.................... 85
13.4 Display Screen Not Functioning ............. 86
13.5 High Outlet Pressure Alarm .................... 86
13.6 Can’t Create a High Pressure Alarm ....... 86
13.7 Low Outlet Pressure Alarm .................... 87
13.8 Can’t Create a Low Pressure Alarm ....... 87
13.9 High Humidity ........................................ 88
13.10 Can’t Create a High Humidity Alarm /
Shutdown ........................................................ 89
13.11 High Flow Rate Alarm.......................... 89
13.12 High Cabinet Temperature Alarm ........ 89
P550W Series Air Dryers User’s Guide
13.13 Inconsistent Heatless Dryer Cycling ..... 90
13.14 Compressor Doesn’t Operate ................ 90
13.15 Compressor Won’t Build Pressure ........ 91
13.16 Compressor Excessive AMP Draw ....... 91
13.17 High Compressor Last Run Time
Alarm .............................................................. 92
13.18 Can’t Create a High Compressor Last
Run Time Alarm ............................................. 92
13.19 Compressor Rapid ON/OFF Cycling .... 93
13.20 Contacting PUREGAS Technical
Support............................................................ 93
14. Appendix ...................................................... 94
14.1 Wiring Diagram ...................................... 94
14.2 Set Point Limits and Defaults ................. 95
14.3 SNMP Parameters ................................... 96
15. Limited Warranty Agreement .................... 97
Registration Reminder .................................... 97
16. Contacting PUREGAS ................................ 98
16.1 General .................................................... 98
16.2 Sales ........................................................ 98
16.3 Service .................................................... 98
16.4 Technical Support ................................... 98
17. Notes.............................................................. 99
Page 5 of 99 P011658 – Rev. P
PUREGAS, LLC
4. Safety & Warning Information
P550W Series Air Dryers User’s Guide
This section contains general information about safety and warning points to consider and adhere to during installation, operation, and maintenance of your air Dryer. PLEASE
READ THIS SECTION BEFORE PERFORMING ANY OPERATION OR
PROCEDURE ON YOUR AIR DRYER.
Additional warnings specific to an operation or procedure will also be presented throughout the following sections. These will include the symbol as well as a label of
“
WARNING!
”, “
CAUTION!
”, or “
IMPORTANT!
”. Please be sure to pay close attention for these warnings and read them as you encounter them.
WARNING!
For your safety, all the information in this User’s Guide must be followed to minimize the risk of electrical shock, and prevent property damage or personal injury.
WARNING!
Extreme care should be exercised to avoid contact with live electrical circuits. Many procedures performed during installation, operation, testing, and maintenance of this air Dryer require the equipment to be running, creating a situation for potential electrical shock. It is highly recommended that you remove all jewelry before performing any procedures.
WARNING!
Internal surfaces may be hot . Use care when coming into contact with internal components as there is a potential for some of these components to become hot when in operation or standby.
Page 6 of 99 P011658 – Rev. P
PUREGAS, LLC
CAUTION!
CAUTION!
CAUTION!
IMPORTANT!
P550W Series Air Dryers User’s Guide
Proper Installation & Maintenance as outlined in this User’s Guide is extremely important to ensure the reliability and longevity of the equipment as well as prevent damage or personal injury.
Depressurizing the air Dryer may be necessary before performing certain procedures. NEVER remove pressure sensing tubes from the
Control Board without depressurizing the air Dryer first, or damage to the Control Board will occur.
Incoming power to Dryer must be:
•
15 amp service recommended
•
10 amp slow blow fuse
•
110 - 125 VAC, 50/60 Hz for P550W models
•
208 - 253 VAC, 50/60 Hz, 1 Phase for P552W models
Performing routine maintenance as outlined in the Maintaining Your
Dryer section will ensure optimal performance over the lifecycle of your air Dryer.
IMPORTANT!
Performing procedures not described in this User’s Guide or installing components not supplied by PUREGAS is NOT RECOMMENDED
AND MAY VOID THE WARRANTY.
Page 7 of 99 P011658 – Rev. P
PUREGAS, LLC
5. Overview & Specifications
P550W Series Air Dryers User’s Guide
5.1 Product Description
The P550W Series Air Dryers from PUREGAS are designed to intake wet ambient air and remove the moisture for delivery to applications requiring a constant, ondemand source of dry, pressurized air. This process is fully automatic and will remain consistent with minimal required periodic maintenance. These dryers are designed specifically for indoor use.
The P550W Series Air Dryers employ a fully digital operating platform offering the most accurate readings of Dryer variables, removable access panel allowing easier access for adjustment and maintenance, and ultra quiet compressor with an industry leading maintenance interval of 8,000 hours.
5.2 Key Features
•
LCD display of all operating parameters
•
Solid state microprocessor-based circuitry eliminates costly maintenance
•
Accurate humidity sensing within
0.1% RH
•
Quietest Dryer on the market - less than 50 dBA
•
Oil-less compressors with 8,000 hour maintenance interval
5.3 P550W Series Air Dryer Models
Model Description
P550W Single Pressure Outlet, 110 - 125 VAC, 2 - 15 PSI
P550WH 4-Bank Outlet Manifold, 110 - 125 VAC, 2 - 15 PSI
P550WLP Low Pressure, Single Pressure Outlet, 110 – 125 VAC, 0.30 – 7.50 PSI
P552W Single Pressure Outlet, 208 - 253 VAC, 2 - 15 PSI
P552WH 4-Bank Outlet Manifold, 208 - 253 VAC, 2 - 15 PSI
P552WLP Low Pressure, Single Pressure Outlet, 208 - 253 VAC, 0.30 – 7.50 PSI
Page 8 of 99 P011658 – Rev. P
PUREGAS, LLC
5.4 Technical Specifications
P550W Series Air Dryers User’s Guide
P550W P550WH P550WLP P552W P552WH P552WLP
Output
Capacity
Power
Requirements
Outlet
Pressure
Range
Outlet Air
Humidity
Compressor
Type
Drying
Method
Operating
Temperature
Range
Noise Level
Alarms
Outlet
Connections
Dimensions
Net Weight
2 – 15 PSI
Normal: Up to 350 SCFD continuous
Maximum: 550 SCFD emergency
110 - 125 VAC,
50 / 60 Hz, 7.0 Amps
0.30 – 7.50
PSI
74 lbs
208 - 253 VAC, 1 Phase,
50 / 60 Hz, 3.5 Amps
2 – 15 PSI
Less than 2% RH
Two-cylinder, 1/2 HP, oil-less type
Heatless Desiccant
40
to 85
F (optimal)
0.30 – 7.50
PSI
51 dBA at 3’, 48 dBA at 10’
Standard alarms – complete readings of all critical measurement points, individual alarm indication display, including SNMP communication
3/8”
O.D. tube fitting
3/8”
Press-tolock, 4bank manifold with shut off valves
3/8” O.D. tube fitting
3/8”
Press-tolock, 4bank manifold with shut off valves
3/8”
O.D. tube fitting
12” D x 17.25” W x 27” H
Page 9 of 99 P011658 – Rev. P
PUREGAS, LLC
5.5 Dryer Function Overview
P550W Series Air Dryers User’s Guide
# Component
1 Compressor
Description
Compresses drawn in ambient air.
2 Heatless Dryer
3 Unloader Valve
Removes moisture from compressed air.
Relieves excess Compressor head pressure.
4 Capacity Control Valve Regulates System Pressure and prevents air from bleeding back through the Heatless Dryer.
5 Humidity Sensor Measures the Humidity of the compressed air.
6 Air Tank Stores dry compressed air.
7 Static Pressure Regulator Regulates the Static Pressure (17 PSI).
Maintains constant pressure on the Flow Block for accurate Flow measuring.
8 Flow Block Measures the Flow of compressed air.
9 Outlet Pressure Regulator Regulates the Outlet Pressure.
10 Pressure Outlet Outputs the pressure set by the Outlet Pressure
Regulator.
11 4-Bank Outlet Manifold Distributes the air into 4 separate outlets.
Page 10 of 99 P011658 – Rev. P
PUREGAS, LLC
6. Installing Your Dryer
6.1 Safety & Warning Information
P550W Series Air Dryers User’s Guide
WARNING!
Internal surfaces may be hot . Use care when coming into contact with internal components as there is a potential for some of these components to become hot when in operation or standby.
WARNING!
Extreme care should be exercised to avoid contact with live electrical circuits. Many procedures performed during installation, operation, testing, and maintenance of this air Dryer require the equipment to be running, creating a situation for potential electrical shock. It is highly recommended that you remove all jewelry before performing any procedures.
CAUTION!
Proper Installation & Maintenance as outlined in this User’s Guide is extremely important to ensure the reliability and longevity of the equipment as well as prevent damage or personal injury.
CAUTION!
Incoming power to Dryer must be:
•
15 amp service recommended
•
10 amp slow blow fuse
•
110 - 125 VAC, 50/60 Hz for P550W models
•
208 - 253 VAC, 50/60 Hz, 1 Phase for P552W models
Page 11 of 99 P011658 – Rev. P
PUREGAS, LLC
IMPORTANT!
P550W Series Air Dryers User’s Guide
Performing procedures not described in this User’s Guide or installing components not supplied by PUREGAS is NOT
RECOMMENDED AND MAY VOID THE WARRANTY.
6.2 Before You Begin
6.2.1 Carefully inspect the unit, including the shipping box as well as the air
Dryer, for ANY DAMAGE CAUSED BY SHIPPING. If any shipping damage is detected, it is important to file a claim with the shipping company prior to continuing the installation procedures.
6.2.2 Read the entire Installing Your Dryer section to familiarize yourself with the components and procedures before performing the air Dryer installation.
6.2.3 Verify the installation location of the air Dryer:
6.2.3.1 Well ventilated and free from abrasive dust or chemicals.
6.2.3.2 Ambient temperature is between 40° and 85° F (optimal).
NOTE: Higher temperatures will decrease component lifespan.
6.2.3.3 Meets the following power requirements:
•
110 - 125 VAC for P550W, P550WH and P550WLP models
•
208 - 253 VAC, 1 Phase for P552W, P552WH and P552WLP models
•
All models require 50/60 Hz and minimum 15 amp service with a 10 amp slow blow fuse
6.2.4 Notify the alarm center of the installation and potential for alarms during the process (as necessary).
Page 12 of 99 P011658 – Rev. P
PUREGAS, LLC
6.3 Included Contents
P550W Series Air Dryers User’s Guide
(1) P550W Series Air Dryer
(1) Installation Guide (not shown)
Package located inside the Dryer:
(1) 120 VAC Power Cord (P550W, P550WH, P550WLP)
(1) 220 VAC Power Cord (P552W, P552WH, P552WLP)
(4) Connector, Male 1/4 MPT (P550WH, P552WH)
(1) Tee Tube Union
(1) Precision Bleed Orifice Fitting
(1) User’s Guide (not shown)
6.4 Required Tools and Materials
•
Medium adjustable wrench
•
Box Cutter
•
Cup of soapy water
•
1-inch paint brush
(recommended)
Page 13 of 99 P011658 – Rev. P
PUREGAS, LLC
6.5 Installation Steps
6.5.1 Using a box cutter remove the Dryer from box and all shipping materials.
NOTE: If ANY SHIPPING
DAMAGE is detected, file a claim with the shipping company prior to continuing the installation procedures.
6.5.2 Open panel latches and remove the front panel.
6.5.3 Check for loose parts, hoses, or wiring.
NOTE: If ANY SHIPPING
DAMAGE is detected, file a claim with the shipping company prior to continuing the installation procedures.
P550W Series Air Dryers User’s Guide
Page 14 of 99 P011658 – Rev. P
PUREGAS, LLC
6.5.4 Remove the ship-loose contents package.
For SINGLE Outlet dryers:
6.5.5 Remove the Plug from the
Outlet Port by pressing the ferrule down then pulling the plug upward.
6.5.6 Install the Plug into the included Precision Bleed
Orifice Fitting and then into the dryer Outlet Port.
For 4-Port Outlet dryers:
6.5.7 Remove four (4) Outlet Port plugs.
6.5.8 Install four (4) Outlet Port
Connectors.
P550W Series Air Dryers User’s Guide
Page 15 of 99 P011658 – Rev. P
PUREGAS, LLC P550W Series Air Dryers User’s Guide
6.5.9 Place the Dryer at the desired operating location:
•
Place the Dryer on a leveled surface
•
For rack install use Universal Rack Mounting Kit P011674 (section
•
For wall install use Wall Mounting Kit P011773 (section 11.4 )
6.5.10 Verify that the Dryer is powered OFF .
6.5.11 Plug AC Power Cord to Dryer.
6.5.12 Wire or plug the power cord into:
•
110 - 125 VAC power outlet for P550W,
P550WH, and
P550WLP models
•
208 - 253 VAC, 1 phase, power outlet for P552W, P552WH, and
P552WLP models. o Line – Black (Brown) o Neutral – White (Blue) o Ground – Green (Green/Yellow)
Page 16 of 99 P011658 – Rev. P
PUREGAS, LLC
6.5.13 Power the Dryer ON .
NOTE : The compressor and heatless Dryer will start, creating air flow through the
Outlet Port.
For 4-Port Outlet dryers:
6.5.14 Open the first Outlet Port slightly to create a small amount of air flow.
6.5.15 Set the System Pressure:
With Compressor running:
6.5.15.1 Pull the Capacity
Control Valve knob out.
P550W Series Air Dryers User’s Guide
Page 17 of 99 P011658 – Rev. P
PUREGAS, LLC
6.5.15.2 Turn the knob until the reading on the pressure gauge is 50
PSI .
6.5.15.3 Push the knob in to lock.
6.5.16 Let the Dryer run until the
Humidity drops below 2%.
(may take up to 15 minutes).
NOTE : Press the RESET button if the Dryer goes into
SHUTDOWN mode.
6.5.17 Power the Dryer OFF .
P550W Series Air Dryers User’s Guide
Page 18 of 99 P011658 – Rev. P
PUREGAS, LLC
For SINGLE Outlet dryers:
6.5.18 Remove the Precision
Bleed Orifice fitting from the
Outlet Port by pressing the ferrule down then pulling the fitting upward.
NOTE: Save this fitting for use in low flow applications.
6.5.19 Connect the air supply line(s):
For SINGLE Outlet dryers:
6.5.19.1 Connect a 3/8” air supply line to the Outlet
Port.
For 4-Port Outlet dryers:
6.5.19.2 Connect up to four
(4) 3/8”air supply lines to the Outlet Ports.
Open Outlet Ports as required.
P550W Series Air Dryers User’s Guide
Page 19 of 99 P011658 – Rev. P
PUREGAS, LLC P550W Series Air Dryers User’s Guide
NOTE: For all dryers with minimal FLOW:
Install the included Precision
Bleed Orifice fitting to maintain a constant air flow.
6.5.20 Power the Dryer ON .
6.5.21 Set the Static Pressure:
6.5.21.1 Pull Static Pressure
Regulator knob out.
6.5.21.2 Turn knob until the reading on the pressure gauge is 17 PSI .
6.5.21.3 Push knob in to lock.
Page 20 of 99 P011658 – Rev. P
PUREGAS, LLC
6.5.22 Set the Outlet Pressure:
6.5.22.1 Pull the Outlet
Pressure Regulator knob out (or loosen the retaining nut – LP
Models).
6.5.22.2 Turn knob until
Outlet Pressure ( OUTP ) reading is at the desired setting.
6.5.22.3 Push knob in to lock
(or tighten the retaining nut – LP Models).
P550W Series Air Dryers User’s Guide
Page 21 of 99 P011658 – Rev. P
PUREGAS, LLC P550W Series Air Dryers User’s Guide
6.5.23 Check for air leaks:
NOTE: This is a general procedure that can be applied to any fitting or hose that has air pressure in it. DO NOT SOAP TEST THE HUMIDITY
SENSOR FITTING. DAMAGE TO THE SENSOR MAY OCCUR.
With Compressor NOT running:
6.5.23.1
Listen for any ‘hissing’ sounds which may indicate a fitting or hose air leak.
With Compressor running:
6.5.23.2 Use a 1-inch paint brush to dab soapy water on the air fitting or hose connection to be tested.
If air bubbles appear at the connection, this indicates that air is leaking from the connection.
If any leaks are detected, take steps to seal them off (as necessary):
•
Tighten the fitting
•
Re-connect the hose end
•
Replace the fitting / hose / component
6.5.24 Re-install the front panel.
6.5.25
REGISTER YOUR DRYER. See section 7. for details.
Page 22 of 99 P011658 – Rev. P
PUREGAS, LLC
6.6 Installation Checklist
P550W Series Air Dryers User’s Guide
No shipping damage was detected.
Dryer location meets the following requirements: o Well ventilated o Free from abrasive dust or chemicals o Ambient temperature is between 40° and 85° F (optimal)
System Pressure is set to 50 PSI.
Static Pressure is set to 17 PSI.
No air leaks are present in the system.
No alarms are present on the Display Panel.
7. Registering Your Dryer
Please take a moment to register your PUREGAS P550W Series Air Dryer.
Registering is necessary to activate the Limited Warranty on your product. Once you register, you are eligible to receive free technical support, as well as updates concerning your PUREGAS products.
Register Online at www.puregas.com/registration
Or by Phone 1-800-521-5351 (option 2)
Have the following information available:
Model # :
Company Name :
Serial # :
Shipping Address :
Location Name :
City :
Contact Name :
Email :
State : Zip Code :
Phone # : ( ) - ext .
Page 23 of 99 P011658 – Rev. P
PUREGAS, LLC
8. Operating Your Dryer
8.1 Safety & Warning Information
P550W Series Air Dryers User’s Guide
WARNING!
Extreme care should be exercised to avoid contact with live electrical circuits. Many procedures performed during installation, operation, testing, and maintenance of this air Dryer require the equipment to be running, creating a situation for potential electrical shock. It is highly recommended that you remove all jewelry before performing any procedures.
WARNING!
Internal surfaces may be hot . Use care when coming into contact with internal components as there is a potential for some of these components to become hot when in operation or standby.
IMPORTANT!
Performing procedures not described in this User’s Guide or installing components not supplied by PUREGAS is NOT
RECOMMENDED AND MAY VOID THE WARRANTY.
Page 24 of 99 P011658 – Rev. P
PUREGAS, LLC P550W Series Air Dryers User’s Guide
8.2 Connecting Air Supply Lines to the Dryer
For SINGLE Outlet dryers:
8.2.1 Connect a 3/8” air supply line to the Outlet Port.
For 4-Port Outlet dryers:
8.2.2 Connect up to four (4)
3/8”air supply lines to the
Outlet Ports.
Open Outlet Ports as required.
NOTE: For all dryers with minimal flow:
Install the included Precision
Bleed Orifice fitting to maintain a constant air flow.
CAUTION : Be careful when removing outlet plugs or connected Air Supply
Lines. System may be pressurized.
Page 25 of 99 P011658 – Rev. P
PUREGAS, LLC
8.3 Depressurizing the Dryer
P550W Series Air Dryers User’s Guide
CAUTION : Be careful when removing air hose. System is pressurized.
8.3.1 Disconnect air hose from the quick disconnect connector located on top of
Outlet Pressure Regulator.
8.3.2 To prevent pressure from building back up, power the Dryer OFF (See
8.3.3 Reconnect air hose.
8.4 Powering the Dryer ON & OFF
CAUTION!
Incoming power to Dryer must be:
•
15 amp service recommended
•
10 amp slow blow fuse
•
110 - 125 VAC, 50/60 Hz for P550W models
•
208 - 253 VAC, 50/60 Hz, 1 Phase for P552W models
8.4.1 POWER Switch - Controls the main power to the Dryer.
Page 26 of 99 P011658 – Rev. P
PUREGAS, LLC
8.5 Using the Front Panel Display
P550W Series Air Dryers User’s Guide
CAUTION!
The Display Screen is covered by a clear protective layer that guards against Electrostatic Discharge (ESD). DO NOT REMOVE
THIS LAYER.
8.5.1 ALARM LED – Indicates an alarm is present.
8.5.2 RESET Button – Clears an alarm and allows the system to continue operating.
8.5.3 HOLD Button – Freezes the current information screen on the display.
When pressed again, it will allow the information screens to begin cycling again.
8.5.4 Arrow Buttons – Used to access, navigate, and change values in the Set
Point Adjust screens.
Page 27 of 99 P011658 – Rev. P
PUREGAS, LLC P550W Series Air Dryers User’s Guide
8.5.5 Display Screen - Shows the current Dryer readings. Will cycle between the following information screens (unless the HOLD button has been pressed):
8.5.5.1 Tank Screen
TANK – Air Tank pressure - fluctuates between 20 – 50 PSI.
OUTP – Outlet Pressure regulated by the Outlet Pressure Regulator
HUMIDITY – Humidity level of the system.
CABINET – Temperature of the Dryer cabinet compartment.
8.5.5.2 System Stat Screen
SYSTEM STAT - Running Status of the system:
•
ON RUN – System is Online.
•
SHUTDOWN – System has been shutdown as a result of either a
Humidity or High Cabinet Temperature alarm.
LAST RUN – How many minutes the compressor ran during the last Air
Tank pressurization cycle.
TTL TIME – How many hours the compressor has run since the last
Comp Run Reset.
FLOW – Air Flow Rate
Page 28 of 99 P011658 – Rev. P
PUREGAS, LLC
8.6 Identifying Dryer Alarms
P550W Series Air Dryers User’s Guide
8.6.1 High Outlet Pressure Alarm -
Occurs when the Outlet Pressure
( OUTP ) rises above the alarm set point for more than one (1) minute.
(Default setting is 10.0 PSI for Standard models / 7.50 PSI for LP models)
See section 13.5 for troubleshooting information.
8.6.2 Low Outlet Pressure Alarm –
Occurs when the Outlet Pressure
( OUTP ) drops below the alarm set point for more than one (1) minute.
(Default setting is 2.0 PSI for Standard models / 0.30 PSI for LP models)
See section 13.7 for troubleshooting information.
8.6.3 High Humidity Alarm –
Occurs when the Humidity level rises above the alarm set point for more than one (1) minute.
(Default setting is 10.0%)
If this alarm is present for one (1) minute or more, the air Dryer will go into
SHUTDOWN mode to prevent saturated air from being delivered to the supply line.
See section 13.9 for troubleshooting information.
Page 29 of 99 P011658 – Rev. P
PUREGAS, LLC P550W Series Air Dryers User’s Guide
8.6.4 High Cabinet Temperature Alarm -
Occurs when the temperature in the cabinet rises above 120°F for more than ten (10) seconds.
If this alarm is present for three (3) minutes or more, the Compressor will
SHUTDOWN to protect against damage due to overheating. Once the temperature lowers to 112°F the Compressor will re-start.
See section 13.12 for troubleshooting information.
8.6.5 High Compressor Last Run Time Alarm –
Occurs when the compressor takes longer to pressurize the air tank than the set point for the alarm. (Default setting is 3:00 minutes)
See section 13.17 for troubleshooting information.
8.6.6 Compressor Total Hour Alarm –
Occurs when the compressor has reached an 8,000 hour maintenance interval. Perform the required maintenance.
See section 10.3 for maintenance information.
8.6.7 High Flow Rate Alarm –
Occurs when the Flow Rate
( FLOW ) rises above the alarm set point for more than one (1) minute. (Default setting is 500 SCFD)
See section 13.11 for troubleshooting information.
Page 30 of 99 P011658 – Rev. P
PUREGAS, LLC P550W Series Air Dryers User’s Guide
8.7 Adjusting & Resetting Dryer Set Points
Dryer Set Points are simply limits programmed for a specific reading. Once this limit is reached (or exceeded) this results in an alarm for that reading. Each of these set points is factory programmed with a default value based on typical usage of the air
Dryer. Many of the set points for Dryer alarms can be modified to levels more closely based upon your specific application.
NOTE
: Reference Appendix Section 14.2 for Limits and Defaults.
•
Press the Up (
) Arrow Button to access the Set Point Adjust screens.
•
Press the Up (
) & Down (
) Arrow Buttons to navigate through the available
Set Point Adjust screens.
•
To change a specific Set Point:
8.7.1 High Flow Rate Alarm Set Point (default setting is 500 SCFD) –
8.7.1.1 Press the Right (
)
Arrow Button to access the
Change Value Screen.
8.7.1.2 Press the Right (
) &
Left (
) Arrow Buttons to move the underscore beneath the digit to change.
8.7.1.3 Press the Up (
) & Down (
) Arrow Buttons to change the value of the selected digit.
8.7.1.4 Press the Right (
) Arrow Button until the underscore disappears.
8.7.1.5 Press the Right (
)
Arrow Button until the underscore appears under the correct setting ( YES or
NO ).
8.7.1.6 Press the Up (
) Arrow to confirm. This will lock in the new setting value.
Page 31 of 99 P011658 – Rev. P
PUREGAS, LLC P550W Series Air Dryers User’s Guide
8.7.2 High Outlet Pressure Alarm Set Point
(default setting is 10.0 PSI for Standard models / 7.50 PSI for LP models) –
8.7.2.1 Press the Right (
)
Arrow Button to access the
Change Value Screen.
8.7.2.2 Press the Right (
) &
Left (
) Arrow Buttons to move the underscore beneath the digit to change.
8.7.2.3 Press the Up (
) & Down (
) Arrow Buttons to change the value of the selected digit.
8.7.2.4 Press the Right (
) Arrow Button until the underscore disappears.
8.7.2.5 Press the Right (
)
Arrow Button until the underscore appears under the correct setting ( YES or
NO ).
8.7.2.6 Press the Up (
) Arrow to confirm. This will lock in the new setting value.
Page 32 of 99 P011658 – Rev. P
PUREGAS, LLC P550W Series Air Dryers User’s Guide
8.7.3 Low Outlet Pressure Alarm Set Point
(default setting is 2.0 PSI for Standard models / 0.30 PSI for LP models) –
8.7.3.1 Press the Right (
)
Arrow Button to access the
Change Value Screen.
8.7.3.2 Press the Right (
) &
Left (
) Arrow Buttons to move the underscore beneath the digit to change.
8.7.3.3 Press the Up (
) & Down (
) Arrow Buttons to change the value of the selected digit.
8.7.3.4 Press the Right (
) Arrow Button until the underscore disappears.
8.7.3.5 Press the Right (
)
Arrow Button until the underscore appears under the correct setting ( YES or
NO ).
8.7.3.6 Press the Up (
) Arrow to confirm. This will lock in the new setting value.
Page 33 of 99 P011658 – Rev. P
PUREGAS, LLC P550W Series Air Dryers User’s Guide
8.7.4 High Humidity Alarm Set Point (default setting is 10.0%) –
8.7.4.1 Press the Right (
)
Arrow Button to access the
Change Value Screen.
8.7.4.2 Press the Right (
) &
Left (
) Arrow Buttons to move the underscore beneath the digit to change.
8.7.4.3 Press the Up (
) & Down (
) Arrow Buttons to change the value of the selected digit.
8.7.4.4 Press the Right (
) Arrow Button until the underscore disappears.
8.7.4.5 Press the Right (
)
Arrow Button until the underscore appears under the correct setting ( YES or
NO ).
8.7.4.6 Press the Up (
) Arrow to confirm. This will lock in the new setting value.
Page 34 of 99 P011658 – Rev. P
PUREGAS, LLC P550W Series Air Dryers User’s Guide
8.7.5 High Compressor Last Run Time Alarm Set Point (default setting is
3:00 minutes) –
8.7.5.1 Press the Right (
)
Arrow Button to access the
Change Value Screen.
8.7.5.2 Press the Right (
) &
Left (
) Arrow Buttons to move the underscore beneath the digit to change.
8.7.5.3 Press the Up (
) & Down (
) Arrow Buttons to change the value of the selected digit.
8.7.5.4 Press the Right (
) Arrow Button until the underscore disappears.
8.7.5.5 Press the Right (
)
Arrow Button until the underscore appears under the correct setting ( YES or
NO ).
8.7.5.6 Press the Up (
) Arrow to confirm. This will lock in the new setting value.
Page 35 of 99 P011658 – Rev. P
PUREGAS, LLC P550W Series Air Dryers User’s Guide
8.7.6 Compressor Total Time Reset –
The Total Time ( TTL TIME ) is the time the compressor runs measured in hours since startup or the last time the compressor time counter was reset.
The dryer will display an alarm when this counter has reached 8,000 hours, signaling is it time for maintenance.
8.7.6.1 Press and Hold the Left
(
) & Right (
) Arrow
Buttons to access the
Change Value Screen.
8.7.6.2 Press the Right (
) &
Left (
) Arrow Buttons to move the underscore beneath the digits to change to zero (0).
8.7.6.3 Press the Up (
) & Down (
) Arrow Buttons to change the value of the selected digit.
8.7.6.4 Press the Right (
) Arrow Button until the confirmation screen appears.
8.7.6.5 Press the Right (
)
Arrow Button until the underscore appears under the correct setting ( YES or
NO ).
8.7.6.6 Press the Up (
) Arrow to confirm. This will lock in the new setting value.
Page 36 of 99 P011658 – Rev. P
PUREGAS, LLC P550W Series Air Dryers User’s Guide
8.7.7 Reset to Factory Values –
8.7.7.1 Press the Left (
) &
Right (
) Arrow Buttons at the same time.
8.7.7.2 Press the Right (
)
Arrow Button until the underscore appears under the correct setting ( YES or
NO ).
8.7.7.3 Press the Up (
) Arrow to confirm. This will lock in the new setting value.
8.7.8 Alarm Delays Set Point -
The Alarm Delay allows the Dryer to come out of the alarm condition on its own without signaling an alarm.
ON (default) – waits one (1) minute before signaling alarms
OFF – signals alarms immediately
8.7.8.1 Press the Right (
)
Arrow Button to change the value.
8.7.8.2 Press the Right (
)
Arrow Button until the underscore appears under the correct setting ( OFF or
ON ).
8.7.8.3 Press the Up (
) Arrow to confirm. This will lock in the new setting value.
Page 37 of 99 P011658 – Rev. P
PUREGAS, LLC P550W Series Air Dryers User’s Guide
8.7.9 Startup Delay Set Point (default setting is 0 sec) –
The Startup Delay keeps the compressor from turning on immediately when the dryer is powered on for up to 10 seconds. This allows multiple dryers to power on in separate intervals in case of a power loss.
8.7.9.1 Press the Right (
)
Arrow Button to access the
Change Value Screen.
8.7.9.2 Press the Right (
) &
Left (
) Arrow Buttons to move the underscore beneath the digit to change.
8.7.9.3 Press the Up (
) & Down (
) Arrow Buttons to change the value of the selected digit.
8.7.9.4 Press the Right (
) Arrow Button until the underscore disappears.
8.7.9.5 Press the Right (
)
Arrow Button until the underscore appears under the correct setting ( YES or
NO ).
8.7.9.6 Press the Up (
) Arrow to confirm. This will lock in the new setting value.
8.7.10 Pressure Gauge –
This is an information screen only and will not time-out, returning to the cycling information screens. It also masks air Dryer alarms while in use. This screen can be used during air
Dryer troubleshooting.
Page 38 of 99 P011658 – Rev. P
PUREGAS, LLC
8.8 Open Panel
8.8.1 Open panel latches and remove the front panel.
8.9 Setting the System Pressure
With Compressor running:
8.9.1
Open Panel (see section 8.8 ).
8.9.2 Pull the Capacity Control
Valve knob out.
8.9.3 Turn the knob until the reading on the Pressure
Gauge is 50 PSI .
8.9.4 Push the knob in to lock.
8.9.5 Close Panel.
P550W Series Air Dryers User’s Guide
Page 39 of 99 P011658 – Rev. P
PUREGAS, LLC
8.10 Setting the Static Pressure
8.10.1
Open Panel (see section 8.8 ).
8.10.2 Pull the Static Pressure
Regulator knob out.
8.10.3 Turn knob until the reading on the Pressure
Gauge is 17 PSI .
8.10.4 Push knob in to lock.
8.10.5 Close Panel.
P550W Series Air Dryers User’s Guide
8.11 Setting the Outlet Pressure
8.11.1
Open Panel (see section 8.8 ).
8.11.2 Pull the Outlet Pressure
Regulator knob out (or loosen the retaining nut – LP
Models).
Page 40 of 99 P011658 – Rev. P
PUREGAS, LLC
8.11.3 Turn knob until Outlet
Pressure ( OUTP ) reading is at the desired setting.
8.11.4 Push knob in to lock (or tighten the retaining nut – LP
Models).
8.11.5 Close Panel.
P550W Series Air Dryers User’s Guide
8.12 Connecting to Common Alarm Terminals
8.12.1
Open Panel (see section 8.8 ).
8.12.2 Locate the external
Common Alarm pins on the
Control Board.
8.12.3 Wire the Common Alarm wire pair to the Control
Board as required:
•
COMMON & NO for
CLOSE ON ALARM operation.
•
NC & COMMON for
OPEN ON ALARM operation.
8.12.4 Close Panel.
Page 41 of 99 P011658 – Rev. P
PUREGAS, LLC P550W Series Air Dryers User’s Guide
8.13 Connecting to Power Fail Alarm Terminals
8.13.1
Open Panel (see section 8.8 ).
8.13.2 Locate the external Power
Fail pins on the Control
Board.
8.13.3 Wire the Power Fail
Alarm wire pair to the
Control Board as required:
•
PWR FAIL & NO for
CLOSE ON ALARM operation.
•
NC & PWR FAIL for
OPEN ON ALARM operation
8.13.4 Close Panel.
Page 42 of 99 P011658 – Rev. P
PUREGAS, LLC
8.14 Connecting via Web Browser
P550W Series Air Dryers User’s Guide
If the Air Dryer IS connected to an IP network:
•
The Air Dryer must be configured with a valid IP Address, Subnet Mask, and
Gateway Address for the network.
•
An IP cable is connecting the Air Dryer to the network.
•
Use a computer that is on the same network as the air Dryer.
•
Use Internet Explorer (6.0 or newer) or Mozilla Firefox Web Browser.
If the Air Dryer IS NOT connected to an IP network and has not been configured with IP information:
•
Use the default IP Address ( 192.168.1.100) of the air dryer to connect.
•
Use an IP Cable (may require Cross-over cable) plugged directly into a
Laptop/PC and the other end plugged into the UTP Port on the control board of the Air Dryer.
•
Configure the network card on the Laptop/PC to use the IP Address
192.168.1.101
. This will make the Laptop/PC compatible with the Air Dryer.
•
Use Internet Explorer (6.0 or newer) or Mozilla Firefox Web Browser.
8.14.1 Type the IP Address of the P550W Series air Dryer in the Address text box of the web browser.
Page 43 of 99 P011658 – Rev. P
PUREGAS, LLC P550W Series Air Dryers User’s Guide
The Web Browser connection offers five (5) screens to the user:
•
Status Screen - Displays the readings and alarms monitored in the
P550W Series Air Dryer. Provides remote ALARM RESET.
•
Config Screen - All configurations of Set Points, Setups, and
Keyword can be made in this screen.
•
Event Screen - Displays all events such as alarms, changes made, and alarm resets registered by the P550W Series Air Dryer. This screen is informational only.
•
Alarm Screen - Displays all the Alarms registered by the P550W
Series Air Dryer. This screen is informational only.
•
Firmware Screen – Allows the user to upload any software updates or upgrades to the Air Dryer.
8.14.2 Click on the Menu Bar selection to access a specific screen.
Page 44 of 99 P011658 – Rev. P
PUREGAS, LLC
8.15 Using the Status Screen
P550W Series Air Dryers User’s Guide
Displays the readings and alarms monitored in the P550W Series Air Dryer.
Provides remote ALARM RESET.
•
Readings are displayed in BLACK unless an alarm is present.
•
Alarms are displayed in RED next to the parameter in alarm.
•
Alarm Status will display Alarm if any alarms are present.
•
Keyword validation is required for ALARM RESET and RESET TOTAL
RUN TIME.
Page 45 of 99 P011658 – Rev. P
PUREGAS, LLC P550W Series Air Dryers User’s Guide
8.15.1 Resetting an Alarm
8.15.1.1 Click on the ALARM RESET Button to remotely reset Air Dryer alarms displayed on Status Screen.
8.15.1.2 Enter Keyword (default is 123456)
8.15.1.3 Click on SUBMIT Button when done.
Page 46 of 99 P011658 – Rev. P
PUREGAS, LLC P550W Series Air Dryers User’s Guide
8.15.2 Resetting Compressor Total Run Time
8.15.2.1 Click on the RESET TOTAL RUN TIME Button to remotely reset
Compressor Total Run Time displayed on Status Screen.
8.15.2.2 Enter Keyword (default is 123456)
8.15.2.3 Click on SUBMIT Button when done.
Page 47 of 99 P011658 – Rev. P
PUREGAS, LLC
8.16 Using the Config Screen
P550W Series Air Dryers User’s Guide
All configuration of Set Points, Setups, and Keyword can be made in this screen.
NOTE
: Reference Appendix section 14.2 for Limits, Defaults, and Formats.
•
Values in BLUE represent the current setting.
•
The ACCEPT Button is used to change values.
•
The CHANGE KEYWORD Button allows you to configure a new Keyword.
•
Keyword validation is required for the following: o Changing a Set Point value o Changing the Keyword
Page 48 of 99 P011658 – Rev. P
PUREGAS, LLC P550W Series Air Dryers User’s Guide
8.16.1 Changing a Set Point or Setup value:
8.16.1.1 Click on the value to change.
8.16.1.2 Type in the new value.
8.16.1.3 Click the ACCEPT Button when done.
8.16.1.4 Enter Keyword (default is 123456)
8.16.1.5 Click on SUBMIT Button when done. This will lock in the new setting value.
Page 49 of 99 P011658 – Rev. P
PUREGAS, LLC P550W Series Air Dryers User’s Guide
8.16.2 Changing the Keyword
8.16.2.1 Click on CHANGE KEYWORD Button to change the keyword.
8.16.2.2 Type the Old Keyword.
8.16.2.3 Type the New Keyword.
8.16.2.4 Type the Confirm New Keyword.
8.16.2.5 Click on SUBMIT Button to confirm. This will lock in the new setting value.
Page 50 of 99 P011658 – Rev. P
PUREGAS, LLC
8.17 Using the Event Screen
P550W Series Air Dryers User’s Guide
Displays all events such as alarms, changes made, and alarm resets registered by the P550W Series Air Dryers. This screen is informational only.
•
Click on the column headings to sort data according to that column.
•
Click the Arrow Buttons to navigate through all the event log pages.
Page 51 of 99 P011658 – Rev. P
PUREGAS, LLC
8.18 Using the Alarm Screen
P550W Series Air Dryers User’s Guide
Displays all the Alarms registered by the P550W Series Air Dryers. This screen is informational only.
•
Click on the column headings to sort data according to that column.
•
Click the Arrow Buttons to navigate through all the event log pages.
Page 52 of 99 P011658 – Rev. P
PUREGAS, LLC
8.19 Using the Firmware Screen
P550W Series Air Dryers User’s Guide
Displays the current firmware version and date of the P550W Series Air Dryers.
•
Current Version: Displays the current firmware version of the P550W Air
Dryer.
•
New Version File: Displays the new location and new firmware version chosen.
•
The BROWSE Button allows you to locate the new firmware file.
•
The ACCEPT Button is used to change values.
•
Keyword validation is required to update firmware.
Page 53 of 99 P011658 – Rev. P
PUREGAS, LLC P550W Series Air Dryers User’s Guide
8.19.1 Updating the Firmware:
8.19.1.1 Click on BROWSE Button to locate the firmware file.
8.19.1.2 Navigate and Select the correct .bin file. Press the OK Button.
8.19.1.3 Click the ACCEPT Button when done
8.19.1.4 Enter Keyword (default is 123456)
8.19.1.5 Click on SUBMIT Button when done. This will lock in the new firmware version.
Page 54 of 99 P011658 – Rev. P
PUREGAS, LLC
8.20 Connecting via SNMP
P550W Series Air Dryers User’s Guide
Using SNMP to connect and communicate with the P550W Series Air Dryer is dependent upon the specific SNMP Management software used on your network.
This software requires a SNMP Definition & Configuration File (MIB file) in order to properly communicate with the Air Dryer.
The files for the P550W Series Air Dryers can be downloaded from our website
(Puregas.com) under the Product Support section SNMP Files link. It is necessary to import this file into your SNMP operating software.
NOTE:
Reference Appendix section 14.3 for a list of SNMP Parameters including
Limits, Defaults, and Formats.
Page 55 of 99 P011658 – Rev. P
PUREGAS, LLC
9. Testing Your Dryer
9.1 Safety & Warning Information
P550W Series Air Dryers User’s Guide
WARNING!
Extreme care should be exercised to avoid contact with live electrical circuits. Many procedures performed during installation, operation, testing, and maintenance of this air Dryer require the equipment to be running, creating a situation for potential electrical shock. It is highly recommended that you remove all jewelry before performing any procedures.
WARNING!
Internal surfaces may be hot . Use care when coming into contact with internal components as there is a potential for some of these components to become hot when in operation or standby.
CAUTION!
Depressurizing the air Dryer may be necessary before performing certain procedures. NEVER remove pressure sensing tubes from the control board without depressurizing the air Dryer first, or damage to the control board will occur.
Page 56 of 99 P011658 – Rev. P
PUREGAS, LLC P550W Series Air Dryers User’s Guide
9.2 Measuring Compressor Amp Draw
WARNING!
Internal surfaces may be hot . Use care when coming into contact with internal components as there is a potential for some these components to become hot when in operation or standby.
With the Compressor running:
9.2.1
Open Panel (see section 8.8 ).
9.2.2 Locate wire #5 coming directly from the compressor.
9.2.3 Use an Amp Meter to measure the running amps.
With the compressor running, the running amps should measure
5.0 amps or below .
9.2.4 Close Panel.
If the compressor measures over 5.0 running amps, see section 13.16 for
troubleshooting information.
Page 57 of 99 P011658 – Rev. P
PUREGAS, LLC
9.3 Measuring Compressor Voltage
P550W Series Air Dryers User’s Guide
WARNING!
Extreme care should be exercised to avoid contact with live electrical circuits. It is highly recommended that you remove all jewelry before performing any procedures.
9.3.1
Open Panel (see section 8.8 ).
9.3.2 Locate the relay terminal block on the control board inside the air Dryer.
9.3.3 Slide off clear plastic terminal block cover.
With the Compressor running :
9.3.4 Use a Voltmeter to measure across the board terminals where wires #5 and #6 are connected.
The voltage should measure
120 VAC (
10%) .
Page 58 of 99 P011658 – Rev. P
PUREGAS, LLC
With the Compressor NOT running :
9.3.5 Use a Voltmeter to measure across the board terminals were wires #5 and #6 are connected.
The voltage should measure
0 VAC (
10%) .
9.3.6 Replace the clear plastic terminal block cover.
9.3.7 Close Panel.
P550W Series Air Dryers User’s Guide
If any of the voltage measurements are different than indicated above, the Control
Board is defective and should be replaced. See sections 11.1 for part detail and
11.5 for ordering information.
Page 59 of 99 P011658 – Rev. P
PUREGAS, LLC
9.4 Measuring Incoming Voltage
WARNING!
P550W Series Air Dryers User’s Guide
Extreme care should be exercised to avoid contact with live electrical circuits. It is highly recommended that you remove all jewelry before performing any procedures.
9.4.1
Open Panel (see section 8.8 ).
9.4.2 Locate the Incoming
POWER connector inside the Dryer.
9.4.3 Use a Voltmeter to measure the voltage (inside Dryer):
9.4.3.1 Place the probes between the Power connector and terminal insulation so that they touch the metal contacts for
BLACK (BROWN) wire and WHITE (BLUE) wire.
The voltage should measure 110 - 125 VAC for the P550W, P550WH and
P550WLP or 208 - 253 VAC for the P552W, P552WH and P552WLP.
9.4.4 Close Panel.
If the incoming voltage measures less than indicated above, it is recommended that steps be taken at your facility to increase the power to the recommended level of voltage.
Page 60 of 99 P011658 – Rev. P
PUREGAS, LLC P550W Series Air Dryers User’s Guide
9.5 Measuring Voltage from AC Step-Down Transformer
WARNING!
Extreme care should be exercised to avoid contact with live electrical circuits. It is highly recommended that you remove all jewelry before performing any procedures.
For P552W, P552WH and P552WLP Dryers:
9.5.1
Open Panel (see section 8.8 ).
9.5.2 Locate the POWER
Switch.
9.5.3 Use a Voltmeter to measure the voltage (inside Dryer):
9.5.3.1 Place the probes between the Power
Switch and terminal insulation so that they touch the metal contacts for BLACK (BROWN) wire #1 and WHITE (BLUE) wire #2.
9.5.4 Close Panel.
The voltage should measure 110 - 125 VAC .
If the voltage at the power switch measures less than 110 VAC and the incoming power voltage is within specifications, it is recommended that the AC transformer
is replaced. See section 11.5 for ordering information
Page 61 of 99 P011658 – Rev. P
PUREGAS, LLC P550W Series Air Dryers User’s Guide
9.6 Testing Consistent Heatless Dryer Cycling
WARNING!
Internal surfaces may be hot . Use care when coming into contact with internal components as there is a potential for some of these components to become hot when in operation or standby.
With the Compressor running :
9.6.1
Open Panel (see section 8.8 ).
9.6.2 Place a piece of insulating material over the compressor for this test (i.e. piece of cardboard) .
9.6.3 Locate the heatless Dryer purge solenoids inside the air
Dryer
Page 62 of 99 P011658 – Rev. P
PUREGAS, LLC
9.6.4 Place your hand beneath the purge solenoids to feel for purging air. Air should:
•
Purge from Tower 1 side
•
Purge from Tower 2 side
30 Seconds later
•
Purge from Tower 1 side
30 Seconds later
• …and so on.
9.6.5 Remove insulating material from top of the compressor.
9.6.6 Close Panel.
P550W Series Air Dryers User’s Guide
If the Heatless Dryer is not cycling consistently as described, see section 13.13
for troubleshooting information.
Page 63 of 99 P011658 – Rev. P
PUREGAS, LLC
9.7 Testing Unloader Valve
With the Compressor running :
9.7.1 Locate the Unloader Valve on the right side of the heatless Dryer.
9.7.2 Place your hand over the
Unloader Valve to feel for air flow.
Air should NOT flow from this fitting continuously. Air should only be released in a short burst when the compressor shuts off.
P550W Series Air Dryers User’s Guide
If air flows from this valve continuously the Unloader Valve is either defective
and should be replaced. See sections 11.3 for part detail and 11.5 for ordering
information.
Page 64 of 99 P011658 – Rev. P
PUREGAS, LLC P550W Series Air Dryers User’s Guide
9.8 Measuring Heatless Dryer Solenoid Voltage
With the Compressor running :
9.8.1 Locate the Heatless Dryer
Cycle Timer.
The timer has three (3) sets of terminals (from left-to-right):
“
VALVE
” – Left solenoid
“
IN
” – Incoming power
“
VALVE
” – Right solenoid
9.8.2 Use a Voltmeter to measure the DC voltage across each set of “ VALVE ” terminals.
Continue to measure for up to
45 seconds if no voltage is initially measured.
The voltage should measure 53 Volts DC .
If the voltage does not measure 53 Volts DC, this is an indication that the Cycle
Timer is defective and should be replaced. See sections 11.3 for part detail and
11.5 for ordering information.
Page 65 of 99 P011658 – Rev. P
PUREGAS, LLC P550W Series Air Dryers User’s Guide
9.9 Testing Air Dryer Fan
NOTE: To test the fan, the cabinet temperature must be above 90
F.
9.9.1 Place your hand outside the
Dryer to feel for air being blown outwards.
NOTE: The fan will turn OFF when the cabinet temperature is below 80
F.
If the fan is not blowing air outwards as described:
•
Verify the cabinet temperature is above 90
F.
•
Check for loose wiring. Refer to the Wiring Diagram (section 14.1 )
•
Replace defective fan (see sections 11.1 for part detail and 11.5 for
ordering information).
•
Replace defective control board if fan does not respond properly to
temperature changes (see sections 11.1 for part detail and 11.5 for
ordering information).
9.10 Testing Compressor ON/OFF Cycling
9.10.1 When the Unit Screen
display, press the HOLD
Button on the Front Panel to freeze that screen.
Page 66 of 99 P011658 – Rev. P
PUREGAS, LLC P550W Series Air Dryers User’s Guide
With Compressor running:
9.10.2 Verify the compressor shuts down when the tank pressure ( TANK ) reaches
50.0 PSI .
If the tank pressure (TANK) fails
to reach 50 PSI, see section 13.15
for troubleshooting information.
With Compressor NOT running:
CAUTION : Be careful when removing Air hose. System is pressurized.
9.10.3
Depressurize air Dryer (see section 8.3.1 )
9.10.4 Verify the compressor turns on when the tank pressure ( TANK ) falls to
20.0 PSI .
9.10.5 Reconnect air hose.
If the Compressor Cycling fails either test described, it indicates a problem with
the Control Board which will need to be replaced. See sections 11.1 for part
detail and 11.5 for ordering information.
Page 67 of 99 P011658 – Rev. P
PUREGAS, LLC P550W Series Air Dryers User’s Guide
9.11 Testing High Compressor Last Run Time Alarm
CAUTION : Be careful when removing Air hose. System is pressurized.
NOTE: For this test, allow the Display Screen to cycle through the information screens.
9.11.1 Start timing when the compressor turns on.
9.11.2
Depressurize air Dryer (see section 8.3.1 )
This prevents the compressor from shutting down.
When the compressor runs for 3:00 minutes (unless adjusted to a different Set
Point by the user), a High
Compressor Last Run Time
( LAST RUN ) alarm should appear on the System Screen.
9.11.3 Reconnect air hose.
9.11.4 Press the RESET Button .
If you are unable to create a High Compressor Last Run Time (LAST RUN)
alarm as described, see section 13.18 for troubleshooting information.
Page 68 of 99 P011658 – Rev. P
PUREGAS, LLC P550W Series Air Dryers User’s Guide
9.12 Testing Humidity Alarm and System Shutdown
CAUTION : Be careful when removing Air hose. System is pressurized.
9.12.1 Power the air Dryer OFF .
9.12.2
Depressurize air Dryer (see section 8.3.1 )
9.12.3 Unscrew and remove the
Humidity Sensor from the
Humidity Block.
9.12.4 Power the air Dryer ON .
Page 69 of 99 P011658 – Rev. P
PUREGAS, LLC
Allow the Humidity reading to rise over 10.0%.
9.12.5 After three (3) minutes, verify that a Humidity Alarm appears and the Dryer goes into SHUTDOWN mode.
9.12.6 Replace the Humidity
Sensor into the Humidity
Block.
9.12.7 Press the RESET Button to clear the Humidity alarm.
P550W Series Air Dryers User’s Guide
If you are unable to create a Humidity / Shutdown alarm as described, see section
13.10 for troubleshooting information.
Page 70 of 99 P011658 – Rev. P
PUREGAS, LLC P550W Series Air Dryers User’s Guide
9.13 Testing High Outlet Pressure Alarm
9.13.1 Make a note of the current
Outlet Pressure ( OUTP ) reading.
9.13.2 Pull the Outlet Pressure
Regulator knob out (or loosen the retaining nut – LP
Models).
9.13.3 Turn knob clockwise until
Outlet Pressure ( OUTP ) reading climbs over 10.0 PSI
( over 7.50 PSI - LP Models).
After one (1) minute, the High Pressure Alarm should appear on the display.
9.13.4 Turn Outlet Pressure
Regulator knob counterclockwise until Outlet
Pressure ( OUTP ) reading lowers to the reading
9.13.5 Push knob in to lock (or tighten the retaining nut – LP Models).
9.13.6 Press the RESET Button .
If you are unable to create a High Outlet Pressure Alarm as described, see
section 13.6 for troubleshooting information.
Page 71 of 99 P011658 – Rev. P
PUREGAS, LLC P550W Series Air Dryers User’s Guide
9.14 Testing Low Outlet Pressure Alarm
9.14.1 Make a note of the current
Outlet Pressure ( OUTP ) reading.
9.14.2 Pull the Outlet Pressure
Regulator knob out (or loosen the retaining nut – LP
Models).
9.14.3 Turn knob counterclockwise until Outlet
Pressure ( OUTP ) reading drops below 2.0 PSI ( below 0.30 PSI
– LP Models).
After one (1) minute, the Low Pressure Alarm should appear on the display.
9.14.4 Turn Outlet Pressure
Regulator knob clockwise until Outlet Pressure ( OUTP ) reading rises to the reading
9.14.5 Push knob in to lock (or tighten the retaining nut – LP Models).
9.14.6 Press the RESET Button .
If you are unable to create a Low Outlet Pressure Alarm as described, see section
13.8 for troubleshooting information.
Page 72 of 99 P011658 – Rev. P
PUREGAS, LLC P550W Series Air Dryers User’s Guide
9.15 Testing Air Fittings & Hoses for Leaks
NOTE: This is a general procedure that can be applied to any fitting or hose that has air pressure in it. DO NOT SOAP TEST THE HUMIDITY SENSOR
FITTING. DAMAGE TO THE SENSOR MAY OCCUR.
With Compressor NOT running:
9.15.1
Listen for any ‘hissing’ sounds which may indicate a fitting or hose air leak.
With Compressor running:
9.15.2 Use a 1-inch paint brush to dab soapy water on the air fitting or hose connection to be tested.
If air bubbles appear at the connection, this indicates that air is leaking from the connection.
If any leaks are detected, take steps to seal them off (as necessary):
•
Tighten the fitting
•
Re-connect the hose end
•
Replace the fitting / hose / component
Page 73 of 99 P011658 – Rev. P
PUREGAS, LLC
10. Maintaining Your Dryer
P550W Series Air Dryers User’s Guide
In order to ensure that your P550W Series Air Dryer continues to operate efficiently and reliably, PUREGAS recommends performing the following maintenance procedures at the specified Six Month and 8,000 Hour intervals.
It is also recommended that you print out the included Six Month Maintenance (section
and 8,000 Hour Maintenance
log sheets and record all completed maintenance for historical tracking and reference purposes.
The log sheets include a Section reference column which indicates the User’s Guide section containing the information about the specific procedure. Please refer to these sections for detailed procedural information.
NOTE: When operating at higher ambient temperatures, it is recommended that maintenance be performed more frequently.
NOTE: After 16,000 hours of run time, PUREGAS recommends sending in your compressors and heatless dryers for a complete and comprehensive rebuild by our
Service Department technicians.
See sections 12.1 and 12.2 for information on
services and contacting PUREGAS.
10.1 Safety & Warning Information
WARNING!
Extreme care should be exercised to avoid contact with live electrical circuits. Many procedures performed during installation, operation, testing, and maintenance of this air Dryer require the equipment to be running, creating a situation for potential electrical shock. It is highly recommended that you remove all jewelry before performing any procedures.
Page 74 of 99 P011658 – Rev. P
PUREGAS, LLC
WARNING!
CAUTION!
CAUTION!
IMPORTANT!
IMPORTANT!
IMPORTANT!
P550W Series Air Dryers User’s Guide
Internal surfaces may be hot . Use care when coming into contact with internal components as there is a potential for some of these components to become hot when in operation or standby.
SHUT DOWN IMMEDIATELY FOR REPAIRS if the air compressor shows any evidence of overheating or presents excessive noise.
Depressurizing the air Dryer may be necessary before performing certain procedures. NEVER remove pressure sensing tubes from the Control Board without depressurizing the air Dryer first, or damage to the Control Board will occur.
Performing routine maintenance as outlined in the Maintaining
Your Dryer section will ensure optimal performance over the lifecycle of your air Dryer.
Performing procedures not described in this User’s Guide or installing components not supplied by PUREGAS is NOT
RECOMMENDED AND MAY VOID THE WARRANTY.
After performing any maintenance, always soap test pressure fittings to check for air leaks. Also, check for any loose or disconnected wiring.
Page 75 of 99 P011658 – Rev. P
PUREGAS, LLC
10.2 Six Month Maintenance
P550W Series Air Dryers User’s Guide
MODEL:
SERIAL NUMBER:
LOCATION NAME:
ADDRESS:
DATE INSTALLED:
Procedure
Install Six Month Maintenance Kit
Read & Record Flow Rate ( FLOW )
Measure & Record
Compressor Amp Draw
Measure & Record Incoming Voltage
(must be 110 - 125 VAC for P550W, P550WH and
P550WLP models and must be 208 - 253 VAC for P552W, P552WH and
P552WLP models)
Section
Test High & Low Outlet Pressure Alarms
Set System Pressure (50 PSI)
Set Static Pressure (17 PSI)
Set Outlet Pressure
Test Consistent Heatless Dryer Cycling
Test Fan
Test Compressor ON/OFF Cycling
Test High Compressor Last Run Time Alarm
Test Humidity Alarm & System Shutdown
Test Air Fittings for Leaks
Visually Inspect Inside & Outside of Unit for Loose
Wiring or Hardware
Maintenance Performed by:
Date of Maintenance:
6
Maintenance Interval (Months)
12
18
24
NOTE: COPY OR PRINT THIS PAGE AND KEEP IT WITH THE AIR DRYER
30
Page 76 of 99 P011658 – Rev. P
PUREGAS, LLC
10.3 8,000 Hour Maintenance
P550W Series Air Dryers User’s Guide
Under typical operating conditions:
8,000 hours of run time will occur between one (1) and two (2) years of use.
This will be identified by a TTL TIME Alarm on the display.
MODEL:
SERIAL NUMBER:
LOCATION NAME:
ADDRESS:
DATE INSTALLED:
Procedure
Install 8,000 Hour Maintenance Kit
Read & Record Flow Rate ( FLOW )
Measure & Record
Compressor Amp Draw
Section
Set System Pressure (50 PSI)
Set Static Pressure (17 PSI)
Set Outlet Pressure
Test Consistent Heatless Dryer Cycling
Test Compressor ON/OFF Cycling
Test Air Fittings for Leaks
Reset TTL TIME Reading to Zero
Visually Inspect Inside & Outside of Unit for Loose
Wiring or Hardware
Maintenance Performed by:
Date of Maintenance:
Maintenance Interval (Hours)
8,000 16,000 24,000 32,000 40,000
NOTE: COPY OR PRINT THIS PAGE AND KEEP IT WITH THE AIR DRYER
Page 77 of 99 P011658 – Rev. P
PUREGAS, LLC P550W Series Air Dryers User’s Guide
11. Replacement Parts & Accessories
11.1 Dryer Parts
Description
Power Switch
Fan
Static Pressure Regulator
Air Tank
Control Board -
Standard Pressure
Low Pressure
Heatless Dryer Assembly
System Pressure Gauge (0-100 PSI)
Part Number Quantity
M038428
P4080
P010279
P011816
P011862
1
1
1
1
1
Recommend
Spare
(1)
P010695 1
Page 78 of 99 P011658 – Rev. P
PUREGAS, LLC
11.2 Dryer Parts cont.
P550W Series Air Dryers User’s Guide
Description
Precision Bleed Orifice Fitting
Outlet Pressure Regulator -
Standard Pressure
Low Pressure
Flow Block
Humidity Sensor
Static Pressure Gauge (0-30 PSI)
Capacity Control Valve
Air Compressor Assembly
Part Number Quantity
1
Recommend
Spare
P013349
P010279
P012316
1
1
In 6-Month Maintenance Kit. See section
P8345 1
P010492 1 (1)
P011639 1
Page 79 of 99 P011658 – Rev. P
PUREGAS, LLC
11.3 Heatless Dryer Assembly Parts
P550W Series Air Dryers User’s Guide
Description
Heatless Dryer
Desiccant Chamber
Cycle Timer
Unloader Valve
Solenoid Valve
Part Number
Page 80 of 99
Quantity
Recommend
Spare
P011738
P2004036
1
2
P010530F1
P011839
1
1
In 8,000 Hour Maintenance Kit. See section
P011658 – Rev. P
PUREGAS, LLC
11.4 Accessories for Your Dryer
P550W Series Air Dryers User’s Guide
Description Part Number
Recommend
Spare
Kits for units with “Type A” Compressor
(See detail comparison on next page to determine Compressor Type)
Six Month Maintenance Kit
Includes air intake filter, compressor muffler, and humidity sensor.
P011798 (2)
8,000 Hour Maintenance Kit
Includes heatless Dryer maintenance kit and compressor maintenance kit.
P011673
Kits for units with “Type B” Compressor
(1)
(See detail comparison on next page to determine Compressor Type)
Six Month Maintenance Kit
Includes air intake filter, compressor muffler, and humidity sensor.
P013478
8,000 Hour Maintenance Kit
Includes heatless Dryer maintenance kit and compressor maintenance kit.
Additional Accessories
P013479
(2)
(1)
Universal Rack Mounting Kit
Includes mounting brackets and hardware for 19” or 23” racks.
Wall Mounting Kit
Includes mounting brackets and hardware.
P011674
P011773
Cycle Kit
Allows multiple dryers to be cycled.
P08033W
Cycle Kit Interface Kit P012341
Page 81 of 99 P011658 – Rev. P
PUREGAS, LLC P550W Series Air Dryers User’s Guide
Compressor Comparison to determine correct Kit Part #
11.5 Ordering Parts from PUREGAS
IMPORTANT!
Instruction for the replacement of individual listed components goes beyond the scope of this User’s Guide and will not be covered. Please refer to the information included with the specific replacement part for this instruction.
Once you have identified your required parts and accessories, contact the PUREGAS
Inside Sales / Service department to order:
(800) 521-5351 (option 2)
Fax – (303) 657-2205 [email protected]
Page 82 of 99 P011658 – Rev. P
PUREGAS, LLC
12. Service & Repair
P550W Series Air Dryers User’s Guide
Only PUREGAS can offer factory direct rebuilds backed by a 6 month factory warranty.
•
2 week turnaround time
•
Estimates available upon request
•
Minimum service charge fee applies
12.1 Services Offered
•
Piston Compressor Rebuild o Replace motor bearings, piston rod assemblies, and install a complete compressor maintenance kit. o Test air flow, air pressure, and electrical performance
•
Heatless Dryer Rebuild o Replace desiccant, o-rings, check valves, springs, and complete solenoid assembly o Test proper component operation
•
Desiccant Tower Repack o Clean out tower and replace desiccant, filter, and o-ring
•
Circuit Board Repair (Limited to current model boards only)
•
Complete Dryer Repair
12.2 Initiating a Service Transaction
•
Contact our Parts & Service Department at 1-800-521-5351 (option 3) to obtain a Return Authorization (RA) number.
•
Carefully package the item(s) to be returned.
•
Mark the Return Authorization (RA) number on the outside of the shipping container.
•
Include the main address and phone number of the individual to contact for related inquiry and follow-up information.
•
Include the purchase order number.
Page 83 of 99 P011658 – Rev. P
PUREGAS, LLC
13. Troubleshooting Your Dryer
P550W Series Air Dryers User’s Guide
13.1 Before You Call PUREGAS
PLEASE READ THIS SECTION FIRST.
It is important that you use the following sections in order to diagnose and attempt to fix the problem with your air
Dryer before placing a call to PUREGAS Technical Support.
This troubleshooting guide is intended to simplify the isolation of problems, present possible causes, provide test procedures for verification, and suggest corrective actions to restore the air Dryer back to normal operation. Each section begins with the most likely cause(s) of the issue. Otherwise, they start from the simplest possibilities and progress to more complicated ones.
This troubleshooting guide is designed to be easy to follow and very effective when used properly. It is suggested to always start at the beginning of the specific problem section and continue in sequence, following the procedures indicated.
13.2 Safety & Warning Information
WARNING!
For your safety, all the information in this User’s Guide must be followed to minimize the risk of electrical shock, and prevent property damage or personal injury.
WARNING!
Internal surfaces may be hot . Use care when coming into contact with internal components as there is a potential for some of these components to become hot when in operation or standby.
Page 84 of 99 P011658 – Rev. P
PUREGAS, LLC
WARNING!
Extreme care should be exercised to avoid contact with live electrical circuits. Many procedures performed during installation, operation, testing, and maintenance of this air Dryer require the equipment to be running, creating a situation for potential electrical shock. It is highly recommended that you remove all jewelry before performing any procedures.
CAUTION!
Depressurizing the air Dryer may be necessary before performing certain procedures. NEVER remove pressure sensing tubes from the Control Board without depressurizing the air Dryer first, or damage to the Control Board will occur.
CAUTION!
Do not test the Humidity Sensor with an ohm meter or apply any DC voltage. This will render the Humidity Sensor defective.
IMPORTANT!
P550W Series Air Dryers User’s Guide
Performing procedures not described in this User’s Guide or installing components not supplied by PUREGAS is NOT
RECOMMENDED AND MAY VOID THE WARRANTY.
13.3 Air Dryer Won’t Power ON
Possible Cause
POWER
OFF
Switch in
position
No incoming voltage to air Dryer
Check
Verify POWER switch is in the ON position
Measure incoming
Corrective Action
Turn POWER switch to the ON position (section
Troubleshoot facility power supply to air
Dryer
Page 85 of 99 P011658 – Rev. P
PUREGAS, LLC P550W Series Air Dryers User’s Guide
13.4 Display Screen Not Functioning
Possible Cause
Dryer experienced a power spike
Ribbon cable disconnected
Check
Verify ribbon cable from the decal is connected at the display board
Corrective Action
Power the air Dryer
OFF for 15+ seconds.
Power the air Dryer ON .
Reconnect the ribbon cable properly.
13.5 High Outlet Pressure Alarm
Possible Cause
Outlet Pressure set too high
High Outlet Pressure
Alarm set point too low
Check
Verify Outlet Pressure
( OUTP ) reading
Verify High Outlet
Pressure Alarm set point
Corrective Action
Adjust Outlet Pressure
Raise High Outlet
Pressure Alarm set point
13.6 Can’t Create a High Pressure Alarm
Possible Cause
Defective Outlet
Pressure Regulator
High Outlet Pressure
Alarm set point higher than default setting
Check
Verify that the Outlet
Pressure Regulator can be adjusted
Verify High Outlet
Pressure Alarm set point
Defective Control Board Verify that the Outlet
Pressure ( OUTP ) reading is higher than the High Outlet Pressure
Alarm set point (above)
Corrective Action
Replace Outlet Pressure
Regulator if unable to adjust pressure
Adjust Outlet Pressure
Regulator so that Outlet
Pressure ( OUTP ) reading climbs over verified set point
Replace Control Board
Pressure ( OUTP ) reading is over verified
High Outlet Pressure
Alarm set point for more than 1 minute and fails to create an alarm.
Page 86 of 99 P011658 – Rev. P
PUREGAS, LLC
13.7 Low Outlet Pressure Alarm
P550W Series Air Dryers User’s Guide
Possible Cause
Outlet Pressure set too low
Check
Verify Outlet Pressure
( OUTP ) reading
High Flow condition Verify Flow Rate
( FLOW ) reading is not higher than expected
Low Outlet Pressure
Alarm set point too high
Verify Low Outlet
Pressure Alarm set point
Leak in the air system With no outlet flow, test fittings and hoses for
Corrective Action
Adjust Outlet Pressure
Troubleshoot High Flow condition
Lower the Low Outlet
Pressure Alarm set point
Tighten any loose connections as required
13.8 Can’t Create a Low Pressure Alarm
Possible Cause
Defective Outlet
Pressure Regulator
Low Outlet Pressure
Alarm set point lower than default setting
Check
Verify that the Outlet
Pressure Regulator can be adjusted
Verify Low Outlet
Pressure Alarm set point
Defective Control Board Verify that the Outlet
Pressure ( OUTP ) reading is lower than the
Low Outlet Pressure
Alarm set point (above)
Corrective Action
Replace Outlet Pressure
Regulator if unable to adjust pressure
Adjust Outlet Pressure
Regulator so that Outlet
Pressure ( OUTP ) reading drops below verified set point
Replace Control Board
Pressure ( OUTP ) reading is under verified
Low Outlet Pressure
Alarm set point for more than 1 minute and fails to create an alarm.
Page 87 of 99 P011658 – Rev. P
PUREGAS, LLC
13.9 High Humidity
CAUTION!
P550W Series Air Dryers User’s Guide
Do not test the Humidity Sensor with an ohm meter or apply any DC voltage. This will render the Humidity Sensor defective.
Possible Cause
Low Flow Rate
High Humidity Alarm set point too low
Defective Humidity
Sensor
Heatless Dryer not cycling between towers
(
Check
Low System Pressure Verify System Pressure
Verify Flow Rate
FLOW ) reading is low
Verify High Humidity
Alarm set point
If Flow Rate is low, allowing a higher alarm set point (up to 10%) will allow Dryer to run within acceptable levels.
Perform the Testing
Humidity Alarm and
System Shutdown test
Verify consistent
Heatless Dryer cycling
Defective Control Board Unplug Humidity
Sensor from Control
for Board location)
Humidity reading should drop to 0%
Corrective Action
Adjust System Pressure to 50 PSI, ± 2 PSI.
Install the included
Precision Bleed Orifice fitting to maintain a constant air flow.
Raise High Humidity
Alarm set point
Over 10% not recommended
Troubleshoot
Can’t
Create a High Humidity
Alarm / Shutdown condition
Troubleshoot
Inconsistent Heatless
Dryer Cycling condition
If Humidity did not drop to 0%, replace Control
Page 88 of 99 P011658 – Rev. P
PUREGAS, LLC P550W Series Air Dryers User’s Guide
13.10 Can’t Create a High Humidity Alarm / Shutdown
These troubleshooting steps assume that the Humidity Element is removed from the Humidity Block during the Testing Humidity Alarm and System Shutdown
Possible Cause
Humidity Sensor Cable disconnected
Check
Verify that Humidity
Sensor cable is connected to the Control
Board
Defective Humidity
Sensor
Verify that Humidity reading fails to climb higher than 15% or creates sporadic readings
Defective Control Board Verify that Humidity reading is over 15% for more than 1 minute
Corrective Action
Connect Humidity
Sensor cable
Replace Humidity
Replace Control Board if no alarm is created and system does not shut
13.11 High Flow Rate Alarm
Possible Cause Check
Air leak in downstream cable outside of Dryer
Verify Flow Rate
( FLOW ) reading is not higher than expected
Air leak inside of Dryer Test fittings and hoses
High Flow Alarm set point too low
Verify High Flow Alarm set point
Corrective Action
Fix downstream problem
Reconnect or replace bad fitting / hose
Raise High Flow Alarm
13.12 High Cabinet Temperature Alarm
Possible Cause
Fan Failure
High Ambient
Temperature
Check
Verify fan is running
Verify temperature of
Dryer operating location. Recommended ambient temperature is
40°-85°F.
Corrective Action
Check for loose fan
Replace defective fan
Lower the ambient temperature of the
Dryer’s operating location
Page 89 of 99 P011658 – Rev. P
PUREGAS, LLC P550W Series Air Dryers User’s Guide
13.13 Inconsistent Heatless Dryer Cycling
Possible Cause
Defective Solenoid
Valve
Check
Measure voltage going to the Heatless Dryer
Solenoid Valves
Defective Cycle Timer Measure voltage going to the Heatless Dryer
Solenoid Valves
Corrective Action
If 53 VDC IS present, replace Solenoid Valves included in the 8,000
Hour Maintenance Kit
If 53 VDC IS NOT present, replace the
Cycle Timer
13.14 Compressor Doesn’t Operate
Possible Cause
Defective compressor
Defective control board
System is in Shutdown state
Check
Measure compressor voltage
Measure compressor voltage
On the Display Panel, verify that the system is in SHUTDOWN state
Corrective Action
If voltage is good, replace compressor
or send it in for repair
If measurements are incorrect, replace control board (section
Press the RESET
Button
Page 90 of 99 P011658 – Rev. P
PUREGAS, LLC P550W Series Air Dryers User’s Guide
13.15 Compressor Won’t Build Pressure
Possible Cause
Defective Unloader
Valve
Leak in air system
Check
Low System Pressure Verify System Pressure
Corrective Action
Adjust System Pressure to 50 PSI, ± 2 PSI.
Replace Unloader Valve
Test Unloader Valve
If this is continuously flowing high amounts of air, the Unloader Valve is defective.
Check all hoses and fittings between compressor and Air
Tank for air leaks
Connect, tighten, or replace leaking component
13.16 Compressor Excessive AMP Draw
Possible Cause
Restriction in air line
Compressor failing
Check
Remove Discharge Hose from compressor (hose to the heatless Dryer)
Re-measure Compressor
AMP Draw
Remove Discharge Hose from compressor (hose to the heatless Dryer)
Re-measure Compressor
AMP Draw
Corrective Action
If measurement is below the recommended amps, trace hoses from compressor to Unloader
Valve looking for restrictions or kinks
If measurement is still above the recommended amps, replace the compressor
or send it in for repair
Page 91 of 99 P011658 – Rev. P
PUREGAS, LLC P550W Series Air Dryers User’s Guide
13.17 High Compressor Last Run Time Alarm
Possible Cause Check
Low System Pressure Verify System Pressure
High Flow condition
Defective Unloader
Valve
Defective Heatless
Dryer Solenoid Valve
Verify Flow Rate
( FLOW ) reading is not higher than expected
Test Unloader Valve
If this is continuously flowing high amounts of air, the Unloader Valve is defective.
Verify consistent
Heatless Dryer cycling
If either side is continuously flowing high amounts of air, the
Solenoid Valve is defective.
Defective control board Measure voltages at control board
Corrective Action
Adjust System Pressure to 50 PSI, ± 2 PSI.
Troubleshoot High Flow condition
Replace Unloader Valve
Replace Solenoid
Valves included in the
8,000 Hour Maintenance
If measurements are incorrect, replace control board (section
13.18 Can’t Create a High Compressor Last Run Time Alarm
Possible Cause
High Compressor Last
Run Time Alarm set point higher that the default of 3:00 minutes
Check
Verify High Compressor
Last Run Time Alarm
Defective Control Board Verify that the compressor has run longer than the verified
High Compressor Last
Run Time Alarm set point (above)
Corrective Action
Allow the compressor to run longer than the verified set point
Replace Control Board
compressor runs longer than the verified High
Compressor Last Run
Time Alarm set point by
1 minute or more and fails to create an alarm.
Page 92 of 99 P011658 – Rev. P
PUREGAS, LLC P550W Series Air Dryers User’s Guide
13.19 Compressor Rapid ON/OFF Cycling
Possible Cause Check
Defective control board Measure voltages at control board
Corrective Action
If measurements are incorrect, replace control board (section
13.20 Contacting PUREGAS Technical Support
Please read the Before You Call PUREGAS section (13.1 )
Once you have exhausted all of the potential problems and solutions covered in the
Troubleshooting Your Dryer section, and you still require further assistance to correct a problem, contact PUREGAS Technical Support:
(800) 521-5351 (option 1)
Have the following information available:
Trouble Ticket # (if following-up on a previous call) :
Phone # : Technician Name :
Model # :
Company Name :
Serial # :
Location Name :
City : State :
Page 93 of 99 P011658 – Rev. P
PUREGAS, LLC
14. Appendix
14.1 Wiring Diagram
P550W Series Air Dryers User’s Guide
Page 94 of 99 P011658 – Rev. P
PUREGAS, LLC
14.2 Set Point Limits and Defaults
P550W Series Air Dryers User’s Guide
14.2.1 System Adjustments
Description
Minimum
Value
System Pressure
Static Pressure
Outlet Pressure
(LP UNITS)
2.0
(0.30)
Alarm Delay OFF
Startup Delay 0
14.2.2 Alarm Set Points
Maximum
Value
15.0
(7.50)
ON
10
Default
Value
50
17
ON
0
Unit of
Measurement
PSI
PSI
PSI
Seconds
Description
High Flow Alarm
High Outlet Pressure
Alarm (LP UNITS)
Low Outlet Pressure
Alarm (LP UNITS)
High Humidity Alarm
High Compressor Last
Run Time Alarm
High Cabinet
Temperature Alarm
Compressor Total Run
Time Alarm
Minimum
Value
0
0.6
(0.31)
0.5
(0.30)
3
Maximum
Value
900
20.0
(7.50)
19.9
(7.49)
15
2:00 5:00
Default
Value
500
10.0
(7.50)
2.0
(0.30)
10
3:00
120
8000
Unit of
Measurement
SCFD
Shutdown
PSI
PSI
%
Minutes
Deg F
Hours
YES
YES
14.2.3 System Operations
Description
Compressor
ON Value OFF Value
20.0 50.0
Default
Value
Unit of
Measurement
PSI
Fan 90 80 Deg F
Page 95 of 99 P011658 – Rev. P
PUREGAS, LLC
14.3 SNMP Parameters
P550W Series Air Dryers User’s Guide
Device Configuration Information
Device ID
Device Model
Device Firmware Version
Current Date/Time
IP Address
Subnet Mask
Gateway Address
SNMP Trap Server Address
SNMP Read Community String
(also sets SNMP Trap Community String)
SNMP Write Community
Status Readings (Read-Only)
Outlet Pressure Reading
Tank Pressure Reading
Humidity Reading
Flow Reading
Cabinet Temperature Reading
Compressor Total Run Time Reading
Compressor Last Run Time Reading
System Status
Compressor Status
Fan Status
Heater Status (Outdoor Unit Only)
Alarm Readings (Read-Only)
High Flow Alarm
High Outlet Pressure Alarm
Low Outlet Pressure Alarm
High Humidity Alarm
High Cabinet Temperature Alarm
High Compressor Last Run Time Alarm
Maintenance Required Alarm
Total Alarm
Configuration Settings (Read-Write)
High Flow Alarm Threshold
High Outlet Pressure Alarm Threshold
Low Outlet Pressure Alarm Threshold
High Humidity Alarm Threshold
High Compressor Last Run Time Alarm Threshold
Reset Compressor Total Run Time Reading
Start Up Delay
Alarm Reset
Alarm Delay
Alarm Traps Sent to SNMP Server
High Flow
High Outlet Pressure
Low Outlet Pressure
High Humidity
High Cabinet Temperature
High Compressor Last Run Time
Maintenance Required
Alphanumeric (Defined by Customer)
Alphanumeric (Factory Preset)
Numeric (Factory Preset)
Numeric (mm/dd/yy hh:mm)
Numeric (xxx.xxx.xxx.xxx)
Numeric (xxx.xxx.xxx.xxx)
Numeric (xxx.xxx.xxx.xxx)
Numeric (xxx.xxx.xxx.xxx)
Alphanumeric (6-14 digits, Default =
“public”)
Alphanumeric (6-14 digits, Default =
“123456”
Numeric (PSI)
Numeric (PSI)
Numeric (%)
Numeric (SCFD)
Numeric (DEG F)
Numeric (Hours)
Numeric (Seconds)
ON / SHUTDOWN
ON / OFF
ON / OFF
ON / OFF
OK / Alarm
OK / Alarm
OK / Alarm
OK / Alarm
OK / Alarm
OK / Alarm
OK / Alarm
OK / Alarm
Numeric (SCFD)
Numeric (PSI)
Numeric (PSI)
Numeric (%)
Numeric (Seconds)
Numeric (Hours)
Numeric (Seconds)
RESET
ON / OFF
Page 96 of 99 P011658 – Rev. P
PUREGAS, LLC
15. Limited Warranty Agreement
P550W Series Air Dryers User’s Guide
PUREGAS products carry a one (1) year warranty against defective workmanship and material. This period starts at date of shipment. Not included are the components subject to normal replacement during a year’s operating time.
No claims for labor in replacing defective parts or for consequential damages will be allowed. Replacement parts will be invoiced in the regular way, with invoices subject to adjustment after the parts claimed defective are examined at our factory. In addition, no material or parts will be accepted at our factory for in-warranty repairs or credit without previous authorization from PUREGAS.
Responsibility for damages incurred in transit will be borne by the user and the user in turn should file any damage claim against the carrier. All warranty items are F.O.B.
Broomfield, Colorado. Freight charges are the responsibility of the user.
This warranty shall not apply to any PUREGAS product which shall have been repaired or altered in any way by anyone other than PUREGAS or authorized personnel so as to affect, in our judgment, its proper functioning or reliability, neither will it apply to any product which has been subject to misuse, negligence, or accident. The installation of unauthorized non PUREGAS parts will void the warranty on those PUREGAS products.
Registration Reminder
If you haven’t already done so, please take a moment to register your PUREGAS P550W
Series Air Dryer. Registering is necessary to activate this Limited Warranty on your product. Once you register, you are eligible to receive free technical support, as well as updates concerning your PUREGAS products.
See Section 7. for details on Registering Your Dryer.
Page 97 of 99 P011658 – Rev. P
PUREGAS, LLC
16. Contacting PUREGAS
P550W Series Air Dryers User’s Guide
16.1 General
PUREGAS, LLC
226A Commerce Street
Broomfield, Colorado 80020
(800) 521-5351
(303) 427-3700
Fax – (303) 657-2233 [email protected]
www.puregas.com
16.2 Sales
(800) 521-5351 (option 2)
Fax – (303) 657-2205 [email protected]
16.3 Service
(800) 521-5351 (option 3)
Fax – (303) 657-2205
16.4 Technical Support
(800) 521-5351 (option 1)
DON’T FORGET TO REGISTER YOUR DRYER!
See Section 7. for details on Registering Your Dryer.
Page 98 of 99 P011658 – Rev. P
PUREGAS, LLC
17. Notes
P550W Series Air Dryers User’s Guide
________________________________________________________________________
________________________________________________________________________
________________________________________________________________________
________________________________________________________________________
________________________________________________________________________
________________________________________________________________________
________________________________________________________________________
________________________________________________________________________
________________________________________________________________________
________________________________________________________________________
________________________________________________________________________
________________________________________________________________________
________________________________________________________________________
________________________________________________________________________
________________________________________________________________________
________________________________________________________________________
________________________________________________________________________
________________________________________________________________________
________________________________________________________________________
________________________________________________________________________
________________________________________________________________________
________________________________________________________________________
________________________________________________________________________
________________________________________________________________________
________________________________________________________________________
________________________________________________________________________
________________________________________________________________________
________________________________________________________________________
________________________________________________________________________
Page 99 of 99 P011658 – Rev. P
İndir
Herkese açık bağlantı güncellendi
Sohbetinize giden herkese açık bağlantı güncellendi. You may view and manage your chat links after registration here.
Belge herkese açık bağlantısı
Reklam
