ATV aDrums EXS-1, aDrums EXS-5 User Manual

Add to my manuals
36 Pages

advertisement

ATV aDrums EXS-1, aDrums EXS-5 User Manual | Manualzz

aDrums EXS-3

User’s Manual

EN

JA

Welcome .

Contents

Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3

Package Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

Assembly Guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

Top Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

Rear Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

1 Getting Ready . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12

Connecting Audio Equipment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

Connecting the Pads . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

Zones supported by the xD3's trigger inputs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

Power On / Off . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

SETUP - Trigger Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14

Cross-talk Cancel Wizard . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15

SETUP - Utility Functions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16

2 Performing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .22

Home Screen . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22

Performing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22

Changing the Drum Kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23

Selecting a drum kit from the list . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23

Song Playback . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23

Using the Metronome . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24

Using the Visualizer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24

3 Menu Functions and Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .25

SONG . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26

METRONOME . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29

RECORDING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30

INST LEVEL (Adjusting the volume of each pad) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31

SETUP - System Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31

4 Detailed Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .32

Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32

Support . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32

5 Important Notice . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .33

Important Safety Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33

Important Information about Use . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34

Before using aDrums EXS-3 be sure to read ‘5 Important Notices’ p .33 .

2

Setup

Package Contents

This product includes the following items .

Kick Pad Spurs for Kick Pad x2 Crash Cymbal Pad Ride Cymbal Pad

Snare Pad xD3 drum sound instrument

Drum Rack

Tom Pads x3

AC adapter

Hi-hat pad AC adapter for hi-hat pad

Multi-trigger cable

Quick Start Guide

SD memory card

Cable tie

Drum key

Tube A x2 Tube B x2

Tube D

Tube E

Tube F

Tube C Cymbal arms x2

3

Drum arms x4

Setup

Assembly Guide

Connect tubes A to F as the figure right shows .

*A corresponding label (A to F) is attached to each tube .

B

D

C

A

1

Insert tube A into the tube C clamp

E

A

B

F

Tube C

*Securely tighten the clamp bolt

Tube A

2 Insert tube A and tube B into the clamps at the ends of tube D

D

Tube D

Stand L

Tube B

*Securely tighten the clamp bolts

Tube A

4

Setup

3

Insert tube A and tube B into the clamps at the ends of tube F

F

Tube F

Stand R

Tube A

Tube B

70mm

*Securely tighten the clamp bolts

4

Attach tube E clamps to stands L and R

E

Tube E

Stand L

Stand R

5

5

Attach the cymbal boom arms

*Securely tighten all bolts

6

Attach the L-arm to the clamp (1) and the snare to the L-arm (2)

2

*Securely tighten all bolts

1

*Adjust the tension of the pad head using the included tuning key .

6

Setup

7

Attach the tom L-arms to the clamps (1) and the toms to the L-arms (2) as shown

1

2

Setup

*Securely tighten all bolts

*Adjust the tension of the head using the tuning key included in the package .

8

Attach the cymbal pads to the boom arms.

2

Crash cymbal

1

Ride cymbal

2

1

Do not over tighten the wing-nuts . For a natural feel, cymbals should swing freely .

7

2

9

Attach the hi-hat cymbals

1

Hi-hat stand

3

2--3cm

*A hi-hat stand is not included .

10

Attach the spurs to the kick drum pad

1

2

4

Spur

*Tighten the knobs

*A kick pedal is not included .

*The tip of the spur can be adjusted so it protrudes from the rubber stopper .

*Note that the spikes can damage floors .

*Note that the spikes can damage your body .

8

Setup

AC adapter for hi-hat optical sensor (bottom cymbal) . Switch

“On” (light is lit) .

*This AC adaptor can be used worldwide . Please connect the adaptor to a plug attachment (several types included) that is correct for the country of use .

3

5

6

11

Attach the xD3 drum sound instrument

Setup

*After completing the assembly verify that all the bolts are securely tightened .

9

CLICK

CLICK

HOME

HOME

HOME

CLICK

HOME

HOME

CLICK

TRACK

HOME

CLICK

CLICK

HOME

HOME

HOME

CLICK

HOME

HOME

CLICK

TRACK

HOME

Setup

xD3 Top Panel

Only the buttons being operated light up .

Power Button

Long-press this button to turn the power on/off .

SONG [ ](PLAY/STOP)Button

Use to start and stop the song .

An SD memory card is necessary for song playback .

Metronome[ ]Button

Use to turn on / off the

VOLUME [+][–]Buttons

Use to adjust the headphone and output volume .

MENU

MENU

1 2 3 4 5

LIST

–––––––––––––––––––––––––– DRUM KIT ––––––––––––––––––––––––––

SONG

CLICK

CLICK

HOME

HOME

HOME

CLICK

HOME

HOME

PHONES

Audio jack for headphones .

1 2 3 4 drum kits .

]

Press button [1] to return to the Home screen .

5

MENU

[LIST]Button ENTER

SONG VOLUME drum kits for selection .

VARIATION

[

Value Knob

Use to select different menu items and settings .

Use also to adjust values .

[ENTER/MENU] Button

From the home screen, press to access the main menu . Use [ENTER] to confirm menu and setting selection and adjusted values .

MENU

SONG VOLUME

1 3 4 5

LIST

CLICK

[2] [3] [4] [5] are used to select displayed menu functions .

For example, as shown on the screen

(right):

TRACK

[2] Button = DELETE

[4] Button = HELP

[5] Button = LOAD

HOME

HOME

1

SONG

2

4

3

2

6

6

5

3

改定履歴

3

ENTER

承認:

VARIATION

10

発行:ATV株式会社

1 2 3 4 5

5

日付 担当 承認

ENTER

MENU

Gray (C0M0Y0K50)

担当 承認

公差:±0.3

設計: Mori

2017.3.27

SONG

公差:±0.3

2017.3.27

図面番号:

名称:

HR08-****

葉数: 1 / 1

図面番号: HR08-****

葉数: 1 / 1

MENU

ENTER

生産図

生産図

1 HOME 2 3 4 5

VARIATION

HOME

Setup

xD3 Rear Panel

SD CARD

Insert the included SD card that contains song data . Additional songs can also be stored and loaded . The SD card is also used to back-up and import xD3 sound data . The xD3 is only compatible with SD /SDHC cards from 2 GB up to 32 GB .

USB

The xD3 can be connected to a

Mac or Windows PC, allowing MIDI messages to be transmitted and received . Use a USB 2 .0 cable .

MIDI OUT

Connect MIDI devices and send MIDI signals .

OUTPUT

These jacks output the audio signal . Connect them to a powered speaker, mixer or audio interface .

AUDIO IN

Connect a music player here so you can play along with the input audio . The AUDIO IN signal is routed to main OUTPUT and

PHONES .

CRASH 2

Connect an additional cymbal pad to expand the drum set .

MULTI TRIGGER IN

Connect the included multi-trigger cable here to input trigger signals from the pads .

DC IN

Connect the included

AC adapter here .

About the AC adapter

The AC adapter can be used worldwide .

Attach the included plug that is suitable for the type of outlet in your country .

*You must use only the included AC adapter and plug .

11

6

5

4

3

2

1

承認:

発行:ATV株式会社

改定履歴 日付

設計:

公差:±0.3

Mori

2017.3.27

担当 承認 色調: Gray (C0M0Y0K50)

名称: eD3 BOTTOM CASE

図面番号:

HR08-****

葉数: 1 / 1

生産図

1 Getting Ready

Connecting Audio Equipment

In order to use the xD3, you will need the following items .

• Headphones or powered speakers, etc .

You can play along with your own songs by connecting a music player’s stereo line output to the xD3’s AUDIO IN jack .

USB ATV LINK

SD CARD

R OUTPUT L AUDIO IN

TRIGGER INPUT

MULTI TRIGGER DC IN 2 AUX 1

Stereo 1/4” jack for headphones

Stereo 3 .5mm mini jack

Mono 1/4” jack outputs

L R

Connecting the pads

First connect the multi-trigger cable to the xD3’s rear panel and then to each pad . Note the connection destination labeled on each jack plug and connect them as shown in the illustration .

After completing all connections, fix the cables onto the stands using the included cable ties .

CTL

HH

CR

SN

T1

K

T2

T3

CUP

(BELL)

RD

12

1 Getting Ready

Zones supported by the xD3’s trigger inputs

xD3 trigger input

Notes

KICK Head N/A

SNARE

TOM 1

Head,Rim

Head

N/A

N/A

Input hardware is only single-trigger capable .

Side stick sound function can be enabled, see the user’s manual .

(Only available on the snare input .)

Input hardware is only single-trigger capable .

TOM 2 Head N/A Input hardware is only single-trigger capable .

Input hardware is only single-trigger capable .

TOM 3

HI-HAT

CRASH

RIDE

CRASH 2

Head

Bow,Edge

Bow,Edge

Bow,Edge,Cup

Bow,Edge

N/A

YES

YES

YES

YES

Three-zone input requires two pad cables .

Power On / Off

Turning the power on

1

Lower the volume of the connected amp or speakers.

2

Turn on the power of the hi-hat.

The indicator under the hi-hat turns on .

3

Long-press the power button of the xD3.

The power turns on .

Turning the power

off

1

Lower the volume of the connected amp or speakers.

2

Long-press the power button of the xD3.

The power turns off .

All settings are saved .

Power switch of hi-hat

On< >Off

*Disconnecting the AC adapter without turning off the power can cause malfunctions . Always turn off the power by pressing the power button .

3

Turn off the hi-hat power switch.

Turning the power off automatically (auto poweroff )

If the xD3 has not been played or operated for 30 minutes, it automatically turns off the power in order to conserve electricity . The auto power-off function can be disabled or adjusted via a setting in the system tab of the setup menu (see p .31) .

Note: The hi-hat's power is not automatically turned off .

13

1 Getting Ready

Trigger Settings

These settings are used to optimize the performance of the xD3 by calibrating the unit’s triggering sensitivity in response to signals from the pad sensors .

Setting up the sensitivity of triggers is important when using the equipment for the first time or when changing the type of pad .

Target Pad Display

CLICK

CLICK

HOME

HOME

HOME

CLICK

HOME

HOME

CLICK

TRACK

HOME

System Tab

Trigger Tab

Help Screen Display

Utility Tab

1

From the home screen, press the ENTER/MENU button and select SETUP using the value knob. Press ENTER again to access the screen shown above. Press the [3] (TRIGGER) button to select the trigger menu tab.

2

Use the value knob to select a menu item and press the [ENTER] button. Turn the value knob to adjust the setting.

*These general settings are applied to all drum kits .

Total Pad Response

Increasing the sensitivity of all pads will produce a powerful sound even when playing with soft taps .

This may be suitable for younger children or players who have a softer playing style . The default sensitivity is indicated by the setting 'NORMAL' . Pad sensitivity can be increased by turning the value knob through the range +1 to +3 .

Pad Model

Use to set the type of pad connected to each trigger input .

*Please use the default setting .

Sensitivity

Head-Rim Adjust

Pedal HH Sens

HH Close Adjust

Use to adjust the sensitivity of each pad . From the default value (0), the sensitivity can be increased with positive value settings (+1 to +10) or decreased with negative value settings (-1 to -10) .

Use to adjust the balance sensitivity between the head sound and the rim-shot sound of the snare drum pad .

If the rim-shot sound is triggered consistently when hitting the snare pad head, adjust the value in the range H1–H10 to find a balance that suits your playing style . If you find it difficult to play the rim-shot, try adjusting the value between R1–R10 .

Use to adjust the volume of the foot-close and foot-splash hi-hat sounds .

Use to adjust the closed position of the hi-hat . If the hi-hat does not sound sufficiently 'closed' when pressing on the pedal with normal pressure, adjust this setting to a positive value in the range 1–5 . If the hi-hat does not sound sufficiently 'open' when the pedal pressure is relaxed or released, adjust this setting to a negative range value -1 to -5 .

Cross-Talk Cancel

Wizard

Use to eliminate “cross-talk”, which is an unwanted signal transmission between pads .

Simply hit each pad according to the Cross-talk Cancel Wizard instructions and the appropriate settings will be made automatically .

SONG

For detailed instructions, please refer to the section about using the "Cross-talk Cancel Wizard" (p .15) .

VOLUME

*Execute this wizard when setting up the drum kit for the first time .

*Cross-talk may reoccur if a pad or pad's mount position is changed . In such cases, please re-execute the wizard .

3

To confirm a setting adjustment and exit editing, press either the [ENTER] button or [

(BACK) button. Repeat step 2 to select and edit different menu item settings.

]

ENTER

MENU

2

14

1 3 4 5

LIST

–––––––––––––––––––––––––– DRUM KIT ––––––––––––––––––––––––––

SONG

MENU

ENTER

1 2 3 4 5

VARIATION

HOME

MENU

1 Getting Ready

Cross-talk Cancel Wizard

1

Follow the onscreen instructions and strike the indicated pad 3 times with powerful hits.

Indicated Pad

OK Display

*If you press [RETRY], the strikes you made so far will be erased and you can start over .

2

When "OK" is displayed, press the [5] (NEXT) button to advance to the next pad.

3

Repeat step 1 and step 2 in the same way.

The xD3 calculates the state of cross-talk for all of the connected pads .

KICK > SNARE > TOM 1 > TOM 2 > TOM 3 > HI-HAT > CRASH 1 > RIDE > CRASH 2

*If the indicated pad is not connected, press [SKIP] .

4

When the screen below is displayed, play the drum set and check if there are any remaining cross-talk problems, then press the [5] (OK) button to exit the cross-talk cancel wizard.

*If you still detect a cross-talk problem, press the [2] (RETRY) button and repeat the wizard again .

*In some cases, it might not be possible to completely eliminate crosstalk . The following actions might improve the situation .

*Increase the distance between the pads .

*Mount the pads on separate stands .

*Place the system on a stable floor .

*Adjust the tension of the mesh pads .

15

1 Getting Ready

UTILITY

System Tab

Trigger Tab

Help Screen Display

Utility Tab

1

Press the [4] (UTILITY) button to select the Utility menu tab.

2

Select the menu item with the value knob and press the [ENTER] button.

Backup Save

Backup Load

Import Kit

The contents of the xD3's internal storage are backed up to an SD card . Insert your SD card into the xD3 .

*Making a periodic backup is recommended in order to prevent the loss of important data .

p.17

Use to load a backup file from the SD card to the xD3 .

*Depending on the backup type, all or selected data in the xD3 will be deleted .

p.18

Use to import drum kit data downloaded from the ATV Sound

Store to the xD3 . This enables you to expand the number of drum kits .

p.20

SD Card Format

Use this function to format an SD card .

*When the card is formatted, all data stored on the SD card will be deleted .

p.21

Factory Reset

Use this function to restore the xD3 to its factory settings .

*Factory reset deletes and overwrites all data in the xD3 .

p.21

16

1 Getting Ready

Backup Save

Help Screen

Display

Save

1

Use the value knob to select "File Name" and press the [ENTER] button.

2

Enter the backup file name.

Move the file name cursor position left < or right > by pressing buttons [4] and [5] below . Turn the value knob to an select an alphanumeric character . Selected characters may also be deleted [2] or inserted [3] .

Delete character

Insert character

Move cursor right

Move cursor left

3

Press the [ENTER] button to confirm the file name.

4

Use the value knob to select "Saving Items" and press the [ENTER] button.

5

Select the backup type to be saved using the value knob and confirm by pressing the

[ENTER] button.

ALL

KIT+TRIG

KIT+INST

KIT

TRIGGER

Select to save all data stored in the xD3 .

Select to save drum kit instrument volume settings and all trigger settings .

Select to save all drum kit data .

Select to save drum kit instrument volume settings .

Select to save all trigger settings .

6

Press the [5] (SAVE) button to confirm settings and save the backup.

A progress bar is shown while the data is being saved . When saving is complete, the screen indicates "Completed" .

*When ALL is selected, it will take about 10-15 minutes to save a backup . This will vary depending on the amount of drum kit data .

*Do not turn off the power or remove the SD card while a backup is being saved .

17

1 Getting Ready

Backup Load

Delete Backup Load Backup

Help Screen Display

CAUTION

When a backup is loaded, some or all of the data stored in the xD3 will be overwritten and deleted . This depends on the backup type .

1

Use the value knob to select a backup file stored on the SD card. Below 'Loading Items' the backup file type is displayed. The reference table below describes the backup types.

ALL

KIT+TRIG

KIT+INST

KIT

TRIGGER

Select to load a full backup of xD3 data .

*All data stored in the xD3 will be deleted .

Select to load a backup of drum kit instrument volume settings and all trigger settings .

*Drum kit instrument volume settings and trigger settings stored in the xD3 will be deleted .

Select to load all drum kit data .

*All drum kit data stored in the xD3 will be deleted .

Select to load drum kit instrument volume settings .

*Drum kit instrument volume settings stored in the xD3 will be deleted .

Select to load trigger settings .

*Trigger settings stored in the xD3 will be deleted .

2

Press the [5] (LOAD) button to load the selected backup file .

3

A confirmation screen will display warning that selected data will be deleted. Press [2] (NO) to exit the load backup procedure and return to the previous screen. Press [5] (YES) to confirm and proceed with loading the backup.

*A progress bar will display during the backup load . When backup type ALL is selected, it takes about 10 minutes to load . When loading is complete a 'Completed' message will display followed by a prompt to power off / on the xD3 .

4

Press the power button to turn off the xD3, and then turn on the power again. The backup is now loaded.

18

1 Getting Ready

Deleting a Backup File

From the Utility tab of the Setup menu, use the backup load function to select and delete a backup file stored on the SD card .

1

Use the value knob to select a backup file stored on the SD card. Below 'Loading Items' the backup file type is displayed. The reference table on p.18 describes the backup types.

2

Press the [2] (DELETE) button.

3

A confirmation screen will display warning that the selected backup file will be deleted.

Press [2] (NO) to exit the delete backup procedure and return to the previous screen. Press

[5] (YES) to confirm the instruction to delete the backup.

*A progress bar will display to indicate the backup is being deleted . When the backup is deleted a

'Completed' message will briefly display before returning the user to the backup load screen .

19

1 Getting Ready

Import Kit

1

Place the downloaded drum kit file (xxxx.xd3kit) in the Import folder of the SD card.

SD Card

ATV

Import

*If there is no "Import" folder, insert the SD card into the xD3 once, and the folders will be created .

2

Insert the SD card into the xD3 drum module.

Import

Help Screen Display

3

Select the drum kit file to import with the value knob.

4

Press the [5] (IMPORT) button to import.

A progress bar is shown during the import . When the import is completed, the screen indicates

"Completed" .

*It takes about 5 minutes to complete the import .

*The downloaded drum kit file can be imported only into an xD3 with a matching product ID . If the product ID does not match, the following message is displayed: "This xD3 doesn't have a permission to import "xxxx" ."

ATV SOUND STORE

This is a website where additional sounds for the xD3 can be purchased for download .

*To obtain a product ID required for account registration, see p .31 for instructions .

http://store .atvcorporation .com/

20

1 Getting Ready

SD Card Format

Format

CAUTION

Formatting the SD card will delete all its data .

1

Insert the SD card into the xD3 drum module.

2

Press the [5] (FORMAT) button.

A confirmation screen will display prompting you to either proceed with formatting (YES) or cancel the process (NO) and return to the previous screen .

3

Press [5] (YES) button to format the SD card. To exit the screen without formatting press the [2] (NO) button.

When formatting is completed, the message "Completed" is displayed .

Factory Reset

Reset

CAUTION

All data in the xD3 drum module will be deleted when restored to its factory setting .

1

Press the [5] (RESET) button.

A confirmation screen will display prompting you to either proceed with factory reset (YES) or cancel the process (NO) and return to the previous screen .

2

Press [5] (YES) button to proceed with factory reset.To cancel factory reset and exit the screen press the [2] (NO) button.

When factory reset is completed, the message "Completed" is displayed .

3

Press the power button to turn off the xD3, and then turn on the power again. The xD3 is now restored to its factory setting.

21

SONG VOLUME

2 Performing

CLICK

Home Screen

The Home screen is displayed after turning on the power .

Press the [1] (HOME) button from any screen to return to the Home Screen .

The Home Screen is displayed when playing the drums .

TRACK

Song Playback Icon

Song Number

Song Name

HOME

Metronome Tempo

1 2 3 4 5

LIST

–––––––––––––––––––––––––– DRUM KIT ––––––––––––––––––––––––––

Drum Kit Number

Drum Kit Name Visualizer: (p.24)

Visually displays the dynamics and timing of the strikes.

The xD3 patch that assigns sounds to each pad is called a "drum kit" . Changing the drum kit

1

HOME

1 CLICK

When you hit the pad, it resounds.

2

The sound changes naturally according to the strength of the hit .

CLICK HOME

Use VOLUME [+][–] to adjust the volume.

*Adjust the volume to an appropriate level for natural playing .

If the output volume is too low, it may cause you to exert unnecessary force when playing, which may cause pain and possibly injury to your hands and arms . Please avoid setting the output volume too loud as this may damage your hearing and the hearing of others around you, especially young children .

It is possible to set a maximum volume limit for the xD3 (p .31) .

2 3 4 5

VARIATION

SONG

HOME

ENTER

MENU

MENU

ENTER

Corresponding styles of playing

Snare drum

Hi-hat

Crash cymbal

Ride cymbal head shot, rim shot, side stick bow, edge, open-close, foot close, foot splash bow, edge

Bow, edge, cup

MENU

22

CLICK

CLICK

HOME

HOME

HOME

CLICK

HOME

HOME

CLICK

TRACK

HOME

SONG VOLUME

CLICK

CLICK

HOME

HOME

HOME

CLICK

HOME

HOME

CLICK

TRACK

HOME

1 2 3

1 2 3

4

4

5

2 Performing

Changing the Drum Kit

1

Press one of drum kit buttons [1]—[5].

ENTER

MENU

MENU

1 2 3 4 5

LIST

The drum kit saved for each button is loaded .

*It takes several seconds to load the drum kit .

2

When the drum kit name is displayed, you can start playing.

Selecting a drum kit from the list

SONG

Use this function to select and load a drum kit other than those already assigned to buttons [1]—[5] .

1

Press the [LIST] button.

The list of drum kits will be displayed .

2

Select the drum kit with the value knob.

MENU

ENTER

3

Press the [ENTER] button.

The selected drum kit will be loaded .

1 2 3 4

Playing side-stick technique

5

VARIATION

With the xD3 you can enable the side-stick mode to produce a clean cross-stick or 'rim click' sound when playing the snare drum pad .

1

Press the [LIST] button.

SONG VOLUME

The list of drum kits is displayed .

2

Press [5] (SIDE STICK) to set it to "ON".

HOME

Set to "OFF" to disable side-stick technique and the cross-stick sound .

3

Press the [

MENU

Song Playback

MENU

To select and play a song, please insert the provided SD card .

1

Press the SONG [ ] button to start playback.

2

Turn the value knob to select between different songs.

The song name will be displayed and the tempo for factory songs will change automatically .

SONG 3

Press the SONG [ ] button again to stop playback. Note that stopping the song resets playback to the start of the song.

• To play a song with the metronome, press the metronome button to start the click before

5

• You can play along to your own songs ( .wav) stored on the SD card (p .28) .

• Access the song screen from the main menu (p .26) to adjust the volume and other song playback functions .

*The tempo of song playback cannot be adjusted .

23

HOME

CLICK

TRACK

CLICK

CLICK

HOME

HOME

HOME

CLICK

HOME

HOME

HOME

CLICK

HOME

HOME

HOME

HOME

TRACK

HOME

CLICK

TRACK

HOME

CLICK

CLICK

HOME

HOME

HOME

CLICK

HOME

HOME

2 Performing

SONG VOLUME

Using the Metronome

1

Press the [ ] button.

The metronome will start and the button LED

1 2 3 4 5

2

Use the value knob to adjust the tempo.

MENU

The tempo range is 20 - 300 BPM .

3

Press the [ ] button again to stop the metronome.

–––––––––––––––––––––––––– DRUM KIT ––––––––––––––––––––––––––

Using the Visualizer

MENU

MENU

The visualizer tool displays the dynamics and timing of your strikes on the pads .

When the metronome is turned

off

1 2 3 4 5

LIST

Strike strength is displayed as bar graph with the vertical axis representing a dynamic range from very soft 'pp - pianissimo' to very loud 'ff - fortissimo' . The last strike is

Latest strike

MENU strike moves to the left . Using this tool you can monitor the dynamics of successive strikes . This is useful when you want to check the even dynamics of a roll, or the dynamic contrast between light

1 2 3

1 2 3

4

4

5

5

When the metronome is turned on, the visualizer's

Indicator Bar Line Beat

MENU according to the beat setting of the metronome (p .29) .

The measure progress 'indicator' scrolls according to the tempo, and the timing and strength of the strikes are displayed as vertical bars on the graph . The vertical bars are displayed in real-time so you can visually check the timing and dynamic variation of strikes in reference to the metronome .

MENU

MENU

1

1

2

2

3

3

4 5

It is possible to modify the selected drum kits that are assigned to drum kit buttons [1]—[5] . A drum kit can be quickly loaded by pressing one of these buttons .

1

Press the [LIST] button .

2

The drum kit list is displayed .

From the displayed list of available drum kits, select a drum kit that you want to assign using the value knob . Press [ENTER] to load the drum kit .

3

Press and hold for 2 seconds the drum kit button [1]—[5] that you want to assign the drum kit to .

Repeat this process to enable the loading of your favourite drum kits with a single button press .

You can overwrite a drum kit button assignment anytime by repeating steps 1 to 3 .

VARIATION

4 5

24

HOME

CLICK

CLICK

HOME

HOME

HOME

CLICK

HOME

HOME

CLICK

TRACK

HOME

3 Menu Functions and Settings

Other xD3 functions and settings are accessible from the main menu screen .

1

Press the [ENTER/MENU] button from the Home Screen.

The menu will be displayed .

2

Turn the value knob to select a menu item. Press the [ENTER] button to access the selected function or settings.

SONG

METRONOME

RECORD

INST LEVEL

SETUP

Access to make song playback, volume, and marker settings .

Access to make adjustments to detailed metronome settings .

Access to adjust the volume level of each pad for each drum kit .

Access to adjust the system, trigger, and utility settings of the xD3 .

p.26

p.29

p.30

p.31

p.31

3

Press the [

HOME screen.

] (BACK) button or the [1] (HOME) button to exit the menu and return to the

MENU

MENU

1 2 3 4 5

LIST

–––––––––––––––––––––––––– DRUM KIT ––––––––––––––––––––––––––

SONG

MENU

ENTER

1 2 3 4 5

VARIATION

HOME 25

3 Menu Functions and Settings

SONG

In the song screen, you can select a song for playback, adjust the volume level of a song, enable song looping, and set song markers .

Screen display when a song is not playing.

Song Number /

Name

Song Playback

Position

Loop 'On' Icon

Playing Time

Song Volume

Loop On/ Off Setting

Screen display during song playback

Clear Marker(s)

Help Screen Display

Marker

Move the playhead position back / forward in 10 second steps.

Playing Time

Marker Settings

Selecting a song and playback control

1

Turn the value knob to select a song.

When selecting a song, previous settings for loop enable, markers and volume will load .

2

Press the SONG [ ] button to play / stop.

During playback, you can press the [3] and [4] buttons to move the playhead position forwards or backwards in 10 second steps .

Adjusting the volume of the song

1

Press the [2] (VOLUME) button and use the value knob to adjust the song's volume level.

2

Press the [2] (VOLUME) button to exit volume level editing. The value knob is now enabled for song selection.

Volume level

26

3 Menu Functions and Settings

Loop setting

When you enable the loop feature, the selected song will 'loop' and play repeatedly .

1

When playback is stopped, press the [3] (LOOP) button to turn the loop function on / off .

When song looping is enabled, a loop icon is displayed .

Markers

For each song you can set up to 9 markers at any position in the song . During playback you can jump to a specific marker or the start of the song .

Using markers is a great way to focus your play-along practice on selected sections of a song .

Marker settings and control

Adding Markers

1

Start song playback.

2

Press the [5] (MARKER) button and use the value knob to select "ADD".

3

Press the [ENTER] button at a time position in the song where you want to add a marker.

When you add a marker the song timeline display indicates the marker number and its position .

Adding markers at different time positions will automatically change the marker numbers so they are always sequentially ordered .

Jump to Marker

1

To jump to a marker position in the song during playback, select the marker number and press the [ENTER] button. To jump to the start of the song, select "TOP" and press [ENTER].

Clear Marker

1

When playback is stopped, press the [5] (CLEAR MARKER) button.

2

A screen will display prompting you to select a marker to clear. Use the value knob to select the numbered marker or "ALL" to select all markers. To clear the selected marker(s), press the [5] (CLEAR) button. Press the [2] (CANCEL) button to return to the song screen without clearing markers.

*Settings for volume, loop, and markers are stored for each song .

*In the song screen you can not change the tempo of the song . A song's tempo may be adjusted in the HOME screen .

27

3 Menu Functions and Settings

Playing user audio files (wav)

The xD3 supports the playback of wav format audio files (see below) . This enables you to copy your own wav files to the SD card and play them using the xD3's song function .

Supported Format

File Type

Filename Extension

Sampling Frequency

Bit Depth

File Size

Windows Wave (RIFF) wav, WAV

48 kHz

16 bits

Up to 2 GB

Set up

Copy the wav file(s) to the SD card's root folder, as shown below .

SD Card

My Song 1.wav

My Song 2.wav

My Song 3.wav

* Up to 100 wav files can be stored on the SD card .

* Audio files ( .wav) that are stored inside folders are not recognized by the xD3 .

* The xD3 does not support audio file names with 2-byte characters .

Playback

Select a wav file by following the instructions for "Selecting a song and playback control" on p .26 .

28

CLICK

CLICK

HOME

CLICK

CLICK

HOME

HOME

HOME

HOME

CLICK

HOME

CLICK HOME

HOME

CLICK

CLICK

TRACK

HOME

TRACK

HOME

3 Menu Functions and Settings

METRONOME

In the metronome screen, various settings for the metronome can be selected and adjusted .

These settings are described in the table below .

Help Screen Tap Tempo

1

Use the value knob to select a setting to adjust.

4

Tempo

Beat

Note

Sound

Level

5

Tempo in beats per minute (BPM) . The value range is 20 - 300 .

The number of beats per bar / measure . The value range is 1 - 13 .

Note refers to the note subdivision that is sounded by the metronome in reference to tempo and the number of beats . The metronome's note value can be set to:

Whole Note, Half Note, Quarter Note, Eighth Note, Eighth Note Triplet, Sixteenth

Note .

The metronome sound has 6 different settings: Electro, Classic, Cowbell, Claves,

Beep 1, Beep 2 .

This setting adjusts the volume level of the metronome independently from the drum kit and song volume levels .

This setting enables you to start the metronome by striking the CRASH 1 cymbal .

The metronome can be set to play for just one or two measures before stopping .

This function is useful when you want to quickly check your timekeeping against the metronome .

VOLUME

Start w/CR1

1. Set it to "MEAS 1" or "MEAS 2" .

2. Press the [ ] button . CR flashes on the screen .

3. Strike the CRASH 1 cymbal . The metronome will play for 1 or 2 measures depending on the setting .

ENTER

2 MENU

Press the [ENTER] button and adjust the value or setting with the value knob.

3

Press the [ENTER] or [

1 2 3

–––––––––––––––––––––––––– DRUM KIT ––––––––––––––––––––––––––

] (BACK) button to confirm the value / setting adjustment. The

MENU

MENU

1 2 3 4 LIST

–––––––––––––––––––––––––– DRUM KIT ––––––––––––––––––––––––––

The tempo can be set by pressing the TAP button several times . This is useful when you need to quickly setup the metronome for a song with an unknown tempo .

1

Press the [5] (TAP) button according to the beat.

The tempo is set .

SONG

MENU

ENTER

MENU

ENTER

1

1

2

2

3

3

4

4

5

VARIATION

5

VARIATION

29

HOME

HOME

3 Menu Functions and Settings

RECORDING

The record screen enables you to record your drum performances; either solo, or while playing along to a song . The recording feature is a great tool for reviewing song performances . It can also be used create quick demo tracks that you can record onto an external device connected to the xD3's audio outputs .

Note that the record feature does not capture audio from the AUDIO IN jack .

Exit Record

Play / Stop

Recording

1

To start recording from standby mode, start playing the drums or press the SONG [ ] button to start song playback.

When recording starts, the elapsed recording time will be displayed .

When you plan to record with the metronome, it is recommended that you start the metronome in advance while in record standby mode . When you are ready to start recording, start playing the drums or press the SONG [ song playback .

] button . The metronome will automatically synchronize with

The metronome itself is not recorded and can be started or stopped during the recording process .

Playback

2

Press the [4] ( ) button.

This starts playback of the recording . You can turn the metronome on / off during playback .

3

Press the [4] ( ) button to stop playback.

4

To record again, press the [5] (REC) button and repeat from Step 1.

The previous recording will be deleted .

5

To end recording, press [2] (EXIT).

Pressing [2] (EXIT) returns you to the HOME screen .

*When you turn off the xD3, the recording data is erased .

*You can not start song playback after the recording process starts .

*You can not adjust metronome's tempo value while recording .

30

3 Menu Functions and Settings

INST LEVEL (Adjusting the volume of each pad)

In this screen you can adjust the volume level of each pad for the selected drum kit .

1

Strike the pad that you want to adjust the volume level for.

2

Use the value knob to adjust the volume level for the selected (highlighted) pad.

3

Repeat steps 1 and 2 to make further pad volume level adjustments.

*The pad volume levels for each drum kit are stored automatically .

SETUP

SYSTEM

Target Pad Display for

'Pad Pan' setting

System Tab

Trigger Tab

Help Screen Display

Utility Tab

1

Press the [2] (SYSTEM) button to select the System tab menu.

2

Use the value knob to select a menu item and press the [ENTER] button.

LCD Contrast This setting adjusts the contrast of the display .

LCD Brightness This setting adjusts the brightness of the display .

Auto Power Off

Master Vol Limit

MIDI Channel

The xD3 drum module automatically turns off after a 30-minute period of inactivity to reduce power consumption .

The auto power-off function has three available settings:

30 mins :

4 hours :

DISABLE : The unit will not power-off automatically .

This sets the master output volume level that is controlled by the [+] and [-] buttons .

This setting is used to limit the maximum output volume of the xD3 in order to prevent hearing damage caused by listening at excessive volume levels .

Sets the MIDI channel number for sending and receiving MIDI data . Default setting is 10 .

Pad Pan

Firmware

Product ID

This setting adjusts the stereo panning position of each pad .

1 . Strike the pad that you want to adjust . The top right corner of the screen indicates which pad is selected .

2 . Turn the value knob to adjust the panning position while striking the pad . The range of values that may be entered is, Left (L1 - 10), CENTER, and Right (1R - 10R) .

3 . Repeat Steps 1 and 2 for all the pads .

Note that stereo panning positions are general settings that apply to all drum kits .

Firmware version

Product ID . A product ID is required when purchasing drum kits from the sound store .

3

Use the value knob to adjust the value/setting and press the [ENTER] button to confirm .

31

4 Detailed Information

Specifications

Electronic Drum Sound Module

Model: xD3

Item

Terminals and Jacks

Power supply

Specification

AUDIO OUTPUT: L/R, mono ¼ inch (6 .35mm) jack x2

PHONES: stereo ¼ inch phone type

AUDIO INPUT: stereo, 3 .5mm TRS jack

MULTI-TRIGGER INPUT: dedicated multi-connector, 25 PIN D-sub to individual ¼ inch TRS plugs

CRASH 2 TRIGGER INPUT: ¼ inch TRS jack

USB: 2 .0 Type B, for MIDI in/out via USB

MIDI OUT: 5-pin DIN

SD Card: SD/SDHC card (2-32GB only)

DC IN: Only for the included AC adapter

DC 12 V

Power consumption 600 mA

*Specifications and appearance of this product are subject to change without notice for improvement .

Support

Refer to the following URL to download available firmware updates, access documentation and other information:

http://www.atvcorporation.com/en/products/drums/exs-5_3/support.html

32

5 Important Notices

Important safety information

Always follow the basic precautions listed below to avoid the possibility of serious injury from fire, electrical shock or other hazards, and serious damages to the aDrums EXS-3, instrument or other goods and assets . Before using aDrums EXS-3, be sure to read all the safety information below .

About the symbols About warnings and cautions

"Caution": Calls your attention to a point of caution

Indicates a hazard that could result in death or serious injury

WARNING

"Do not . . .": Indicates a prohibited action

"You must . . .": Indicates a required action

CAUTION

Indicates a hazard that could result in injury or property damage

WARNING CAUTION

Do not disassemble or modify

Do not disassemble or modify this product .

Do not use or store in the following locations

• Locations of high temperature (in direct sunlight, near heating equipment)

• Moist or humid locations (near a bath or shower, or on a wet floor)

• Locations subject to salt damage

• Locations subject to water or rain

• Excessively dusty locations

Do not damage the power cord

Do not excessively bend the power cord or damage it . Do not place heavy objects on top of the power cord . Doing so may damage the power cord, causing fire or electric shock .

Use the included AC adapter

Use only the included AC adapter . Use the adapter with the voltage that it specifies .

Turn off the power if an abnormality or accident occurs

In the following situations, immediately turn off the power, disconnect the AC adapter from the

AC outlet, and contact your dealer or ATV for servicing .

• If the AC adapter, power cord, or plug is damaged

• If smoke is emitted or an abnormal odor is noticed

• If liquid or a foreign object enters the unit

• If an abnormality or malfunction occurs in the unit

Do not drop or subject to strong impact

Do not drop this product or subject it to strong impact .

Do not plug or unplug the AC adapter with wet hands

You risk electric shock by doing so .

Grasp the power plug when connecting or disconnecting

When connecting or disconnecting the AC adapter from the unit, you must grasp the plug rather than pulling the power cord .

Don’t use AC outlet multipliers

Doing so will cause the outlet to become hot, causing a fire hazard .

If the power plug is dusty, wipe it off

Dust on the power plug can cause electric shock or short circuits .

Disconnect the power plug from the AC outlet if not using the unit for an extended time, or if lightning is expected

Failure to do so may cause electric shock, fire, or malfunction .

Disconnect all connections before moving the unit

Failure to do so may cause damage to the power cord or cables, or may cause people to trip over the cables .

Don’t place the unit in an unstable location

Doing so may cause the unit to overturn, causing personal injury .

Don’t sit or stand on the unit, or place heavy objects on it

Doing so may damage the unit .

You should also avoid applying excessive force to the buttons, knobs, and input/output jacks .

Doing so will cause malfunctions .

Don’t use the unit at high volume for an extended time

Using speakers or headphones at high volume for an extended time will damage your hearing .

Handle the unit with care

Take care that your hands or fingers are not injured by corners or openings in the unit .

Place small parts out of reach of children

Place small parts out of reach of children who might accidentally swallow them .

33

5 Important Notices

Important Information about Use

Installation

• Do not use the instrument in the vicinity of a TV, radio, stereo equipment, mobile phone, or other electric devices .

Otherwise, the instrument, TV or radio may generate noise .

• Do not expose the instrument to excessive dust or vibrations, or extreme cold or heat (such as in direct sunlight, near a heater, or in a car during the day) to prevent the possibility of panel dis-figuration, damage to the internal components or unstable operation .

• The sensor of the hi-hat is exposed to extremely strong light, it may cause error .

Power Supply

• Even when the power switch is turned off, electricity is still flowing to the product at the minimum level . When you are not using the product for a long time, make sure to unplug the power cord from the wall AC outlet .

Cleaning

• When cleaning the equipment, be sure to use a clean, dry cloth . Cleaning products that contain organic solvents, paint thinner, detergents, and chemicallytreated cleaning cloths can cause discoloration and/or warping and should not be used .

• Do not dirty the reflection plate of the hi-hat. Otherwise the response of the instrument may get worse . When getting dirty, clean the instrument by using a wet towel .

Data

• The company can not be held responsible for damage caused by improper use or modifications to the instrument or data that is lost or destroyed .

• The stored contents may be lost due to malfunction of equipment or incorrect operation . Please backup important data .

About copyrights

• This product incorporates audio / sound data contents in which ATV and third parties own copyrights . Using and copying these materials without permission (except for personal and other uses permitted by the copyright law) is prohibited .

• ATV owns copyrights of the contents embedded or attached to this product . Such copyrighted materials include, without limitation, all computer software, sound / audio files, style / image data files, etc . Any unauthorized use of such programs and contents outside of personal use is not permitted under relevant laws .

• Do not make, resell, redistribute, or republish the abovementioned contents attached or affiliated to the product .

About this manual

• The illustrations as shown in this manual are for instructional purposes only, and may appear somewhat different from those on your instrument .

• The company names and product names in this manual are the trademarks or registered trademarks of their respective companies .

34

5 Important Notices

For EU countries

EN This symbol on the product means that used electrical and electronic equipment should not be mixed with general household waste . The correct disposal will help prevent potential negative effects on human health and the environment . For proper treatment, recovery and recycling, please contact your city office, waste disposal servicer or the shop which you purchased the product .

DE Dieses Symbol auf dem Produkt bedeutet, dass elektrische und elektronische Altgeräte nicht mit gewöhnlichem Haushaltsabfall vermischt werden sollten . Durch die korrekte Entsorgung werden Umwelt und

Menschen vor möglichen negativen Folgen geschützt . Bitte wenden Sie sich bezüglich ordnungsgemäßer

Behandlung, Rückgewinnung und Recycling an ihre zuständige Behörde, Ihren Wertstoffhof oder an das

Geschäft, in dem Sie das Produkt erworben haben .

FR Ce symbole sur le produit signifie que les équipements électriques et électroniques usagés ne doivent pas

être mélangés avec les déchets ménagers . L’élimination appropriée aidera à prévenir les effets négatifs potentiels sur la santé humaine et l’environnement . Pour un traitement, une récupération et un recyclage appropriés, veuillez contacter votre mairie, le service d’élimination des déchets ou le magasin où vous avez acheté le produit .

IT Questo simbolo sul prodotto indica che l’apparecchio elettrico ed elettronico usato non deve essere smaltito insieme ai normali rifiuti domestici . Un corretto smaltimento del prodotto contribuisce a prevenire possibili effetti nocivi sulla salute umana e ambientale . Per il trattamento, il recupero e il riciclaggio appropriati, contattare l’ufficio competente locale, il fornitore del servizio di smaltimento rifiuti o il negozio in cui è stato acquistato il prodotto .

ES Este símbolo en el producto indica que los equipos eléctricos y electrónicos usados no deben mezclarse con la basura doméstica . Su correcta eliminación ayudará a evitar posibles efectos negativos sobre la salud humana y el medio ambiente . Para un tratamiento, recuperación y reciclaje adecuados, póngase en contacto con su ayuntamiento, servicio de eliminación de residuos o el establecimiento donde adquirió el producto .

PT Este símbolo no produto significa que o equipamento elétrico e eletrónico não deve ser misturado com os resíduos domésticos normais . A eliminação correta ajudará a prevenir possíveis efeitos negativos na saúde humana e no meio ambiente . Contacte as entidades responsáveis locais, o centro de tratamento de resíduos ou a loja onde adquiriu o produto para saber como tratar, recuperar e reciclar resíduos .

NL Dit pictogram betekent dat gebruikte elektrische en elektronische apparatuur niet samen met huishoudelijk afval kan worden afgevoerd . Deze juiste wijze van afvalverwijdering draagt bij aan de preventie van mogelijke negatieve invloeden op de gezondheid van de mens en het milieu . Neem contact op met uw gemeente of afvalverzamelpunt of de winkel waar u het product hebt gekocht, voor de juiste behandeling, behoud en recycling .

DA Dette symbol på produktet betyder, at brugt elektrisk og elektronisk udstyr ikke må blandes med almindeligt husholdningsaffald . Den korrekte bortskaffelse vil hjælpe med at forhindre potentielle negative virkninger på menneskers sundhed og miljøet . For korrekt behandling, indsamling og genbrug skal du kontakte dit lokale kommunekontor, affaldsstation eller butikken, hvor du købte produktet .

ATV EUROPE LDA.

Rua 28 de Janeiro, nr . 350 – Fração CC-11, Centro Empresarial Candal Park

Santa Marinha, 4400-335 Vila Nova de Gaia, PORTUGAL

ATV Corporation

888-340 Nakagawa, Hosoe-cho, Kita-ku, Hamamatsu, Shizuoka 431-1304, JAPAN

35

www.atvcorporation.com

© 2019 ATV Corporation All rights reserved.

2019 Rev.02

advertisement

Was this manual useful for you? Yes No
Thank you for your participation!

* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project

Related manuals