SEA GSM-SP11 User Manual
Advertisement
Advertisement
SP11 – User manual
1.
Introduction
GSM-SP11 (for short SP11) is device for remote control and monitoring , SP11 uses GSM network for communication. SP11 has 8 digital outputs ,that can be remotely switched on/off or generate pulse. SP11 has 7 digital inputs.
If input change it´s own state SP11 can react on it via sending SMS message or by voice call.
And 2 analog inputs (clamps A1+, A1- and A2+, A2-), those can be set for measuring current ( 0 to 20 mA ), voltage ( 0 to 10 V ) or temperature measurment for different kinds of temperature sensors..
Detailed information about SP11 activity can be stored in device . Functions and names of inputs/outputs,phone numbers,password etc. are customizable through PC with USB cable or remotely by GPRS through program SeaConfigurator . This configuration program is possible download for free from www.seapraha.cz
(in search type in „Configurator“). Lower part of the box has integrated DIN rail and SP11 can be easily mount into switchboard .
(1) SIM card holder (under detachable cover) krytkou) (2) USB conector type B (under detachable cover)
(3) digital outputs (Y)
(4) DIN rail holder
(5) power supply 8 to 30 V
SS
(6) LED indication of outputs
(7) LED indication of operational status
(8) LED indication of inputs
(9) analog inputs
(10) GSM antenna connector
(11) digital inputs (X)
2.
Package
Content
1pcs GSM-SP11
1pcs GSM antenna (order code GSM-ANT05S)
1pcs USB cable A-B (order code HW-11.02.8818)
Accessories – Must be ordered separately!
Box with power supply GSM-SP-BOX-MV
Temperature sensor GSM-C-T2 … range from -20 °C to +50 °C (integrated KTY81-
210)
Temperature sensor GSM-C-T3 … range from -40 °C to +180 °C (integrated Pt1000)
USB cable you have to have connected power supply to SP11!Load configuration from the device by clicking on button [From station] . In tab „Settings“ –
„Users“ Type in your phone number and name.
7.
Customized configuration must be uploaded to the SP11.
Click on button [To the station] . If you let the USB cable connected,you can watch in tab „Monitoring“ current status of the SP11 and statuses of it´s own inputs and outputs.
8.
Digital inputs (signals to the SP11) connect to clamps X1 to
X7 and digital outputs (signals out from the SP11) connect to clamps Y1 to Y8. Recommended wiring of those signals are written in chapter „Hardware“.when any input changes state,SP11 can send SMS message to you phone in format e.g. “Input1 is ON” (Depends on configuration).
4.
Technical specifications
Parameter
Dimensions
WIdth
Symbol Condition
š
Height
(without
GSM antenna)
Depth (from v
DIN holder)
DCVoltage V
Current h
CC
I
CC
V
CC
= 12V
MIN.
8
TYP
60
90
80
53 *1) Slim)
0,14
MAX Units
30
0,5 *2) mm mm mm
V
DC
A
Power supply
Digital DC inputs (any polarity)
Average power consumption
Number
Voltage log. H
Voltage log. L
Current
P
CC
-
|V
IN
|
|V
IN
|
4
1,67
7
12
<2
6
30
4
W
-
V
V
Digital outputs DC,
AC
Anolog inputs A1 a
A2:
(customizable)
Humidity
I
IN
Number
Voltage DC
Voltage AC
Current DC I
Current AC I
-
V
V
OUTDC
OUTAC
OUTDC
OUTAC
Number -
Measured unit -
Voltage
Current input resistance input resistance
Resolution
GSM module Frekvencies
Temperature Operational
- t
A
Operational
-
R
IN h
A
V
IN
= 12V 2,5
8
50
35
90
90
1
Analog input with customizable conversion , adjustable for different measurements
0 to 10V;
0 to 20mA (input resistance 75 ); temperature sensors:
KTY (-50 až +150°C); max
Pt100 (-100 až +300°C);
Pt1000 (-100 až +300°C); max
Voltage input 100
12
50
Current input 75
12
850/900/1800/1900
-20 +45
90 mA
-
-
-
V
DC
V
AC mA mA
V mA k
bits
MHz
°C
%
*1)
*2)
We can make box smaller „Slim“ design on request.
Average consumption is when GSM network is connected and battery is charged.
Every output switched on increases consumption by 1mA. Max consumption is short when device is downloading data via GPRS and weak signal and discharged battery.
SP11 is designed for installation into switchboard with min. protection at least IP44!
5.
Hardware
3.
Installation
Caution!
2.
1.
b.
a.
Before inserting the SIM card into the SP11 device, we recommend to turn off setting of the “PIN code”!
Vložte aktivovanou (= zavolat alespoň na infolinku operátora) SIM kartu většiny mobilních telefonů naleznete tuto volbu v menu „Nastavení zabezpečení telefonu“.
3.
4.
c.
ATTENTION:
Before connecting analog input make sure you have the right configuration for it!(typically voltage/current input).
1.
Before powering up SP11 insert activated SIM card into SIM card reader (under detachable cover) and mount the GSM antenna. SIM card is inserted to the reader by slope side heading down and contacts heading to the middle of the SP11.
Recognize right insert by mechanical click. To remove the SIM card - press the
SIM card in direction into the the freely removed.
SP11 until mechanical click. The SIM card can be
2.
Connect device to DC power supply. DC voltage must be 8-30Vss , connect to clamps + and – and turn on the power supply.
3.
If power is good, green LED PWR goes on.After about 20 sec blue LED GSM will starts flashing every 3 sec .
4.
Send SMS message in format 1234 STATE to the SP11´s phone number. Device will respond with state SMS message in format
„ GSM-SP11: Y1=vyp......X1=vyp....AP=12V....“ .For further configuration you have to use program SeaConfigurator (see below).
5.
Install program SeaConfigurator , It´s latest version is available for download on www.seapraha.cz
(in search type in „Configurator“).
Downloaded program install according to the instructions of installation guide. USB driver will be installed automatically.
6.
Run program SeaConfigurator (Start Programs SEA
Configurator Configurator). Connect device to PC through USB cable, which is included in package.During configuration through
GSM-SP11_Users_Manual_EN_v1_06.docx
Clamps A1-, A1+ a A2-, A2+ (analog input):
… voltage input 0 to +10 V (clamp A1+ / A2+ connect to higher potencial!)
… current input 0 to +20 mA (clamp A1+ / A2+ connect to higher potencial!)
… temperature sensor KTY81-210, Pt100, Pt1000 (order of connection doesn´t matter) strana 1 / 5
Caution!
Everywhere where is risk of interference,we recommend using galvanicaly separated power supply for inputs and outputs from SP11´s power supply. You can use power supply GSM-PWR1.
5.1
Digital inputs (X)
Digital inputs of SP11 are marked from X1 to X7. Clamp COM is common for all digital inputs. On the picture below you can see example connection of external circuits and internal connection of input X1 (same for all digital inputs).It doesn´t matter on polarity of clamp COM,it can be plus or minus.
5.4
Front panel
1 2
3 4
5 6
7 8
IN(X)
PWR
GSM
ERR
5.2
Analog inputs (A1,A2)
SP11 has two customizable analog inputs (A1, A2),they are connected to input terminal box (marked as A1+, A1- and A2+, A2-). Analog input can be configurated for measuring voltage 0 to 10 Vss, current 0 to 20 mA or temperature via temperature sensors KTY81-210, Pt100 or Pt1000.
Measured values of voltage and current can be converted to units specified by user.
E.g. Measured current 10 to 20mA can be displayed like pressure 0 to 5 Mpa.
(look to the configuration program SeaConfigurator ).
Caution!
Analog inputs must be right configurated via program SeaConfigurator at first and then connect measured signals! This prevents damaging input circuits during wrong configuration. E.g. If input is set as current input can´t be used for measuring voltage! If input is set for measuring temperature you can only use passive
(resistance) sensor and it doesnť matter on polarity.
5.3
Digital outputs (Y)
Digital outputs of SP11 are marked from Y1 to Y8.Clamp C1-4 is common for outputs
Y1 to Y4 and clamp C5-8 is common for outputs Y5 to Y8. On the picture below you can see example connection of external circuits and internal connection of output Y1
(same for all outputs). Output Y2 switches negative power line of the relay´s coil Re2 and output Y6 switches positive power line of the relay´s coil Re6 (relay coil voltage must be same as voltage of the power supply!).Polarity of clamp C1-4 and clamp C5-
8 doesn´t matter.
GSM-SP11_Users_Manual_EN_v1_06.docx
OUT(Y)
1 2
3 4
5 6
Front panel of SP11 has State LEDs and indication LEDs of inputs and outputs. State is displayed for inputs X1 to X7 and for outputs Y1 to Y8
(indication LEDs for Y7 and Y8 are situated above USB conector).When input/output is ON, corresponding LED glows or blinks.
Under detachable cover are situated SIM card reader , button for sleep mode and conector for extension module.
SIM card is inserted to the reader by slope side heading down and contacts heading to the middle of the SP11. Recognize right insert by mechanical click. To remove the SIM card - press the SIM card in direction into the mechanical click. The SIM card can be the freely removed.
SP11 until
On extension conector can be connected communication board or by flat cable extension module which will be situated on left side of SP11 on DIN rail. USB conector for connection to PC is under folding cover next to the detachable cover.
LED
PWR
GSM
Color green blue
Off device is turned off no GSM signal
On connected to external power supply 8-30
V
different
GSM error occured
Meaning
Blink 1 per 2s
Device is powered from internal battery working status
Fast 1:1
-
SIM card problem
ERR red working status error error error
1 to 7
(IN)
1 to 8
(OUT) green green input isn´t active output is off input is active output is on
Waiting for input recognition before sending
SMS message .
Output is regulated or pulse is generated on output.
-
5.5
Datalogger
SP11 can save (log) detailed informations about it´s own activity. Saved log can be used for analyzing activity of device. User can set up which informations will be saved to log file during configuration of SP11 via program SeaConfigurator . Is possible to save informations about input/output signals or received/send SMS messages. File type of log file is .csv (= Comma Separated Values).Name of log file is derived from actual date (data.csv).
There are two types of log records: periodic and event.Multiple logs file can be generated in same day distincted from each other by symbol „@“ and letter.It can happen in those cases: Reset SP11, writing configuration and pulling out SIM card.
(Examples of log file´s names: 130205.csv; [email protected]; [email protected];
[email protected]; etc.). Log files can be deleted in program SeaConfigurator .
There are two types of log records: periodic and event. Event record contains actual analog values. Periodic saves average, minimal or maximal analog value.
These are typical saved values:
LocalTime;type;phone;text;Y1;Y1.cmd;Y2;Y2.cmd;Y3;Y3.cmd;Y4;Y4.cmd;Y5;Y5.cmd
;Y6;Y6.cmd;Y7;Y7.cmd;Y8;Y8.cmd;X1;X2;X3;X4;X5;X6;X7;PWW;AP;A1;A2;ALM1;Ba tt.Chg;Batt.Cap;T.int;Ubat;Inab;GSM.cell;GSM.signal;GSM.credit;
Example of one „line“ of record:
2014-05-04 14:15:43;1;;;0;;0;;0;;0;;0;;0;;0;;1;;0;1;0;0;0;0;0;1;16,1;17,6;5,4;0;
100;?;27,5;4209;1;23002F,2F20,049E_0030;38;; label Meaning
Time Local type *1) phone text
Y1
Y1.cmd *2)
Local date and time when event occured
Type of saved record (1 to 6)
Phone number
Text of SMS message
State of output Y1
Command for output Y1 strana 2 / 5
X1
PWW
AP
A1 *3)
Unit 1
ALM1 *4)
ALM2 *4)
Batt.Chg
Batt.Cap
T.int
S3
Ubat
Inab
GSM.cell
GSM.signal
GSM.credit
… Y2,Y2.cmd,Y3,Y3.cmd,Y4,Y4.cmd,Y5,Y5.cmd,Y6,Y6.cmd,Y7,Y7.cmd,Y8,Y8.cmd
State of input X1
… X2,X3,X4,X5,X6,X7
Digital input power supply
Analogový vstup "napájení" [V]
State of analog input A1
… A2
Presence of extension module
State of alarm 1
State of alarm 2
Approximate backup battery charge level [%]
Approximate long term backup battery charge level [%]
Internal temperature of the device [°C]
6.2
GSM signal strengh – filtrated value [%]
Current battery voltage [mV]
Current approximate service value about backup battery charging
Informations about BTS current GSM signal strengh v [%]
Water works:
Gate=open
Heater=heats
(16/20‘C)
Lamp=glows
SIGNAL=58%
1
Whenever the command SMS contains valid password the
0
0
100
76
29.2
38
4193
398
23002F,0404,047A_006E
35
SP11
Name of station
Input 1 is ON will be OFF.
Output 3 in ON
send back Status
1
14.4
SeaConfigurator . Only those states which aren´t disabled in field next to inputs/outputs „Mention in status message“ are mentioned in status SMS message.
Examples of status message
6.3
Status SMS message
0 Vysvětlení informací ve zprávě o stavu
Input 2 in ON after temperature reach 20°C Input 2
GSM Signal strengh
Control using SeaControl (Smart phone
Credit on pre-paid SIM card
with Android)
This application can use smartphones with Android OS. Application makes easier control of SP11 and state monitoring.You can download this application from Google
Play for free,type into search „seacontrol“.
*1)
*2)
Record type:
1 – periodic depends on time
2 – also when digital input/output is changed
3 - received SMS
4 - sent SMS
5 – outgoing call
6 – configuration informations (only in case of restart)
Y.cmd:
B ... alert
A ... alarm
Q ... reset
P ... pulse
N ... nonfreezing number ... regulation
(-- if two or more cases are true,only the highest one will be saved (E.g. if Regulation,
*4) nonfreezing and Pulse are true, only P will be saved.)
*3) A1:
O … disconnected;
Z … short circuit;
? … unknown (After turning on, device doesn´t communicate)
ALM1, ALM2:
E.g. On, off, alarm, alert
6.4
You can control outputs and watch state of SP11 in tab „Monitor“ in configuration program SeaConfigurator .
7.
Contol via SeaConfigurator (PC with WIN)
Configuration
Program SeaConfigurator is designed for local and remote configuration and for local and remote monitoring of SP11.Local configuration and monitoring is provided through USB cable and remote configuration and monitoring is provided through
GPRS data connection. Latest version of SeaConfigurator can be downloaded for free from www.seapraha.cz
(in search type in „Configurator“).
Preview of configuration screen in SeaConfigurator :
5.6
Backup battery
SP11 has backup Li-Ion battery , that allows SP11 work without external power supply.
6.
Control
6.1
Control via SMS message (COMMAND)
SP11 is controlled via SMS message in GSM network.Those SMS messages must be in format:
<PASSWORD> <COMMAND> [<COMMAND>] ...between password and command must be space.
Example:
1234 STATE … send message about device´s state.
7.1
Configuration via SMS messages
Some important parameter can be configurated by special configuration SMS messages.
Caution!
When configurating via SMS is important to understand that´s only change of parameters and it will not match with configuration saved in PC.
1234 ON … switch on output Y1 (If output number isn´t specified
,device will switch on output with the lowest number) and confirms switching on via
SMS message.
1234 Y1 ON … switch on output Y1 and confirms it via SMS message.
1234 Y4 PULSE 10 NOBACK … switch on output Y4 for 10sec (then switch it off)
, but will not send SMS message.
1234 Y4 PULSE value.
… switch on output Y4 for 10sec, because it was last entered
1234 Y4 RESET … switch off output Y4 for 4sec (4sec are set by default ).
1234 Y1 TEPL 20 … Output will regulate heater to 20°C, through temperature sensor selected in SeaConfigurator.
Is possible to put multiple commands in one message all at once:
1234 Y1 ON Y2 TEPL 20 Y3 PULSE
Output names (Y1, Y2, Y3 etc.) and state names (ON, TEPL, PULSE etc.) can user define in program SeaConfigurator . Command SMS message can look like this:
1234 GATE OPEN STOVE HEAT 20 LAMP BLINK 4
GSM-SP11_Users_Manual_EN_v1_06.docx
7.1.1
Reset to factory settings
1234 FACTORY … resets SP11 to factory settings
7.1.2
Restriction for number of sent messages
1234 !LIMITSMS p d … restriction (pnumber ) of SMS sent in specified amout of time ( d ays).
Sets restriction for number of sent SMS messages and calling in specified amount of time. First parameter specifies allowed number of outgoing SMS messages and second one specifies amount of time in days. When exceeds limit of sent SMS messages device will send one more message about exceeding limit to master. After expiration of specified amount of time and restoring function no SMS message will be send.
Supressed SMS messages and calls will be lost.Current settings can be find by command „ 1234 !LIMITSMS ?
“. Default setting is !LIMITSMS 70 7 , or max 70
SMS messanges per 7 days. Counter resets when new configuration is uploaded from
SeaConfigurator . strana 3 / 5
7.1.3
User – sending SMS (disable/enable)
This SMS message is useful in case when user change his phone number or users are changed.
1234 USER DIS +420123456789 … disable user with phone number+420.. from controlling SP11.
1234 USER EN +420123456789 … enable user with phone number+420..user can control SP11.
1.1.1
User – controlling SP11 (disable/enable)
thss SMS message can be useful when you need to disable user (temporarily) from controlling SP11.
1234 CODE DIS 1234 …disable user with password 1234 from controlling SP11.
1234 CODE EN 1234 … enable user with password 1234 control SP11.
8.
SP11 in box
SP11 can be fitted into small box (GSM-SP-BOX-MV).This box has power supply
230VAC/12VDC, 15W (GSM-PWR1).This solution counts with additional installation of extension for analog and digital inputs TGSM-SP-EXP on left side of SP11. On the top of the box is SMS panel connector for antenna connection.
7.1.4
Disable/enable event from input/output
This SMS is useful in case when some failure appears (E.g. input malfunction), which will cause sending many warning SMS messages.Parameter which can be changed/set via SMS message are in SeaConfigurator .
1234 X1 !DIS
… disable events for input X1
7.1.5
Presetting GPRS connection
Parameters, which can be change/set via SMS message are in SeaConfigurátor marked with SMS symbol in yellow field (pictures below). Clicking on symbol will display window with hint and with text of configuration SMS message.
Hints for configuration SMS messages are part of SeaConfigurator´s SMS in yellow field.
7.2
Explanation of important terms
PIN (Personal Identification Number – usually 4 digits) = SIM card can use only users who know PIN (in case when PIN usage in activated on the SIM card).PIN usage can be deactivated. Insert SIM card into your phone a deactivate PIN using manual of the phone (PIN can be usually deactivated in Menu Security PIN).
PASSWORD = Password must be included in SMS commands, configuration and monitoring of SP11.SP11 accepts only SMS with valid password.Password is also required for connecting SP11 with PC (through USB cable or remotely via data connection in GSM network). Factory password is „ 1234 “.
EVENT = Change of state on digital input or transition of analog value between two preset zones. SP11 can react on events by different actions, if they were set in configuration. SP11 can send SMS message or call on specified phone numbers.
ACTION = It is one voice call or SMS message to one user or internal COMMAND.
Every EVENT can cause multiple ACTIONS.
COMMAND = Is send via SMS message to device or it can be summon as ACTION when EVENT occurs. This kind of command is called internal COMMAND and same rules aplly for it like for COMMAND in SMS message (Only it doesn´t has password in front of it.).
LIST OF USERS =List of all users and their phone numbers,which are used in
ACTIONS.User names are used for better organization. SP11 doesn´t use those names.
DEVICE SHUTDOWN = Disconnect SP11 from all sources of energy (from external power supply and internal battery).
DEVICE STARTUP = Connect SP11 to power source. From perspective ofSP11 it doesn´t matter if device is powered from internal battery or external power supply.(Note: reset of the SP11´s processor means startup for SP11).
POWER supply TURN ON/OFF = connecting/disconnecting SP11´s power supply clamps from external power supply (Note: Because SP11 has internal battery, it can be configurated in case of connecting/power failure of the power supply , device will send this information through SMS message.).
Dimensions of small box:
Protection class: IP55
External dimensions: width: height: depth:
166 mm
140 mm (without through holes and antenna connector)
150 mm
Into the box next to the external power supply and SP11 can fit also GSM-SP-EXP or
8 pcs of relay in socket. If you need to more space you can use big box (GSM-SP-
BOX-VV).
GSM-SP11_Users_Manual_EN_v1_06.docx
strana 4 / 5
Possible problems and their solution
Problem reason Solution Problem description
Typical problems during installation of the
SP11:
SP10after installation
(during first use) seems pernamently unavailable in GSM network.
Typical problems during running of
SP11:
Suddenly SMS sending from
SP11 stops pernamently work.
Typical problem during SP11 remote configuration via
GPRS
Ringing from
SP11 when event occured can´t be cancelled by denying.
Disconnected / turned off power supply broken / yet inactive SIM card depleted credit on prepaid SIM card
PIN blocked SIM card
(must be unblocked by
PUK).
Test phone call is redirected into voice mail.
Weak GSM signal.
Depleted credit on prepaid SIM card.
SIM card expirared:
GSM provider require
SIM card credit recharge after some time (cca 1 year) .
Different reason
New SIM card doesn´t have activated GPRS.
Too short time of dialing/ringing in configuration.
Check power supply for
SP11. Note: SP11 is not powered from USB cable!
Put SIM card into your phone to check functionality
Check credit status on prepaid SIM card.
Check PIN usage for SIM card in SIM card settings.
Cancel phone call redirection and cancel notification when calling to different GSM network.
Check GSM antenna.
Check GSM signal quality where SP11 is placed. (E.g.
You can check it with your
Phone with SIM card from same GSM provider.Your phone should have in place where GSM antenna is located at least two signal strengh bars.).
Tip: Call
*22# to find how much credit is on the SIM card.
For Vodafone cards
*101# For Twist - T-Mobile
*104*# For GO - O2
*161*# For BleskMobil (O2)
Recharge credit contact GSM provider for
SIM card reactivation.
Insert SIM card from SP11 into your phone and try to send SMS message.
If you still can´t send SMS, contact your GSM provider.
(Check if you have right settings for service center phone number (SCA)).
You can figure out reason of your problem from LED signalization on SP11´s front panel.
Ask GSM provider to activate
GPRS data for SIM card in SP11.
Extend times in configuration
„restrict dialing time“,
„restrict ringing time“
9.
Frequently Asked Questions (FAQ)
1. What is necessary to use the SP11 succesfully?
SIM card must allow receiving/sending SMS messages from phone, incoming and outgoing voice calls and GPRS data. Before using SIM card in SP11 is necessary to solve all issues (or with help from your GSM provider).
Good GSM signal strengh in place where SP11 will be located (at least 2 two signal bars on your phone). Problem with insufficient GSM signal can be often solved by using different type of GSM antenna. Which will be placed on proper spot. Antenna will be connected to SP11 by koax cable with SMA terminal.
Enough credit (in case of using pre-paid SIM card).
Cancel all phone call redirections and automatic notifications from GSM provider before call connection (E.g. about calling to different GSM provider network).
2. What is (SCA Service Center Address) number of my GSM provider? (In case when SMS sending from SP11 doesn´t work)
In present time we have those service centers in Czech republic:
+420 608 005681 - Vodafone
+420 603 052000 - T-Mobile
+420 602 909909 - Telefónica O2
3. I wanted to try functionality of SP11 with my own SIM card. After that I can
´t find my SMS messages, which were located on SIM card before.
SMS messages were processed by SP11 and then deleted.Probably because they were analyzed as syntacticaly incorrect.
4. Where can I find more informations?
More informations you can get on www.seapraha.cz
.
10.
Warranty
NGeneral warranty period is 12 months after purchase, when eventual malfunction device will be repaired free of charge in SEA company while shipping to SEA is paid by customer and SEA pays for shipping back to customer. For SW there is 24 months warranty under following conditions:
Both CPU and PC software is sold “as is”. The software was created by the best software engineers in SEA and was carefully tested both in SEA and also by SEA customers using GSM applications products made in SEA. In spite of making all possible to get error free software it can happen, that the software in CPU or PC programming SW or their mutual interaction has some error under some specific conditions. If such error is found and the description of the problem including configuration file is sent by E-mail to SEA ltd., the error is removed free of charge and
SEA will send new SW by E-mail to customer.
SEA ltd. has NO RESPONSIBILITY for any damage, lost, costs and any other problems direct or inducted, caused by such SW error, by eventual device malfunction from any reason or by undelivered SMS from the device.
Main company residence is complaint place:
SEA spol. s r.o.
Dolnoměcholupská 1537/21
102 00 Praha 10, tel. 272700058
47117931 ( manufacturer ) declare under our sole responsibility, that product device for remote control and monitoring type
GSM-SP11 is in conformity with the following standards: health and safety:
EMC: radio frequency:
CE Declaration of conformity in accordance with the Radio and Telecommunications Terminal Equipment
Directive 1999/5/EC (R&TTE) and Directive 2011/65/EU (ROHS).
We SEA, spol. s r.o., Dolnoměcholupská 1537/21, CZ 102 00 Praha 10, Czech Republic, ID :
EN 60 950-1:2005+A1:2009 EN 60 950-1:2006+A11:2009+A1:2010+A12:2011
ETSI EN 301 489-1
EN 301 511 v 9.0.2
ETSI EN 301 489-7 v1.3.1
The last two digits of year in which the CE marking was affixed: 13
Place of issue: Praha
Date of issue : 2.9.2013
Name:
Grade:
Ing. Vladimír Rosůlek
Technical director
GSM-SP11_Users_Manual_EN_v1_06.docx
strana 5 / 5

Public link updated
The public link to your chat has been updated.
Advertisement