Panasonic SC-HTB900GNK 3.1 Channel Atmos Soundbar User Manual

Add to my manuals
40 Pages

advertisement

Panasonic SC-HTB900GNK 3.1 Channel Atmos Soundbar User Manual | Manualzz

SC-HTB900-EGEBGN-TQBM0479_eng.book 1 ページ 2019年4月16日 火曜日 午後7時58分

Operating Instructions

Home Theater Audio System

Model No. SC-HTB900

Thank you for purchasing this product.

Please read these instructions carefully before using this product, and save this manual for future use.

Included Installation Instructions

The installation work should be done by a qualified installation specialist. (  12 to 15)

Before commencing work, carefully read these installation instructions and the operating instructions to ensure that installation is performed correctly.

(Please keep these instructions. You may need them when maintaining or moving this system.)

Model number suffix “EB” denotes UK model.

EB EG GN

2019/05/09

TQBM0479

SC-HTB900-EGEBGN-TQBM0479_eng.book 2 ページ 2019年4月16日 火曜日 午後7時58分

Safety precautions

WARNING

Unit

≥ To reduce the risk of fire, electric shock or product damage,

– Do not expose this unit to rain, moisture, dripping or splashing.

– Do not place objects filled with liquids, such as vases, on this unit.

– Use the recommended accessories.

– Do not remove covers.

– Do not repair this unit by yourself. Refer servicing to qualified service personnel.

≥ To prevent injury, this apparatus must be securely attached to the wall in accordance with the installation instructions.

AC mains lead

≥ To reduce the risk of fire, electric shock or product damage,

– Ensure that the power supply voltage corresponds to the voltage printed on this unit.

– Insert the mains plug fully into the socket outlet.

– Do not pull, bend, or place heavy items on the lead.

– Do not handle the plug with wet hands.

– Hold onto the mains plug body when disconnecting the plug.

– Do not use a damaged mains plug or socket outlet.

≥ The mains plug is the disconnecting device.

Install this unit so that the mains plug can be unplugged from the socket outlet immediately.

Button-type battery (Lithium battery)

≥ Risk of fire, explosion and burns. Do not recharge, disassemble, heat above 60 o C or incinerate.

WARNING

DO NOT INGEST BATTERY,

CHEMICAL BURN HAZARD

This product contains a coin/button cell battery. If the coin/button cell battery is swallowed, it can cause severe internal burns in just 2 hours and can lead to death. Keep new and used batteries away from children. If the battery compartment does not close securely, stop using the product and keep it away from children. If you think batteries might have been swallowed or placed inside any part of the body, seek immediate medical attention.

Small object

≥ Keep the adhesive tape of the IR Blaster and the screws out of reach of children to prevent swallowing.

CAUTION

Unit

≥ Do not place sources of naked flames, such as lighted candles, on this unit.

≥ This unit may receive radio interference caused by mobile telephones during use. If such interference occurs, please increase separation between this unit and the mobile telephone.

≥ This unit is intended for use in moderate climates.

≥ Product Identification Marking is located on the bottom of the unit.

Placement

≥ Place this unit on an even surface.

≥ To reduce the risk of fire, electric shock or product damage,

– Do not install or place this unit in a bookcase, built-in cabinet or in another confined space. Ensure this unit is well ventilated.

– Do not obstruct this unit’s ventilation openings with newspapers, tablecloths, curtains, and similar items.

Do not block the top of the main unit and the rear of the active subwoofer. (  5, 6)

– Do not expose this unit to direct sunlight, high temperatures, high humidity, and excessive vibration.

Button-type battery (Lithium battery)

≥ Danger of explosion if battery is incorrectly replaced.

Replace only with the type recommended by the manufacturer.

≥ Insert with poles aligned.

≥ Mishandling of batteries can cause electrolyte leakage and may cause a fire.

– Remove the battery if you do not intend to use the remote control for a long period of time. Store in a cool, dark place.

– Do not heat or expose to flame.

– Do not leave the battery(ies) in a car exposed to direct sunlight for a long period of time with doors and windows closed.

≥ When disposing of the batteries, please contact your local authorities or dealer and ask for the correct method of disposal.

Disposal of Old Equipment and Batteries

Only for European Union and countries with recycling systems

These symbols on the products, packaging, and/or accompanying documents mean that used electrical and electronic products and batteries must not be mixed with general household waste.

For proper treatment, recovery and recycling of old products and used batteries, please take them to applicable collection points in accordance with your national legislation.

By disposing of them correctly, you will help to save valuable resources and prevent any potential negative effects on human health and the environment.

For more information about collection and recycling, please contact your local municipality.

Penalties may be applicable for incorrect disposal of this waste, in accordance with national legislation.

(Note for the battery symbol (bottom symbol)):

This symbol might be used in combination with a chemical symbol. In this case it complies with the requirement set by the

Directive for the chemical involved.

2 TQBM0479

SC-HTB900-EGEBGN-TQBM0479_eng.book 3 ページ 2019年4月16日 火曜日 午後7時58分

Caution for AC Mains Lead

(For the AC mains plug of three pins)

For your safety, please read the following text carefully.

This appliance is supplied with a moulded three pin mains plug for your safety and convenience.

A 5-ampere fuse is fitted in this plug.

Should the fuse need to be replaced please ensure that the replacement fuse has a rating of 5-ampere and that it is approved by ASTA or BSI to BS1362.

Check for the ASTA mark Ï or the BSI mark Ì on the body of the fuse.

If the plug contains a removable fuse cover you must ensure that it is refitted when the fuse is replaced.

If you lose the fuse cover the plug must not be used until a replacement cover is obtained.

A replacement fuse cover can be purchased from your local dealer.

Before use

Remove the connector cover.

How to replace the fuse

The location of the fuse differ according to the type of AC mains plug (figures A and B). Confirm the AC mains plug fitted and follow the instructions below.

Illustrations may differ from actual AC mains plug.

1. Open the fuse cover with a screwdriver.

Figure A Figure B

Fuse cover

2. Replace the fuse and close or attach the fuse cover.

Figure A

Fuse

(5 ampere)

Figure B

Fuse

(5 ampere)

About Bluetooth

®

Panasonic bears no responsibility for data and/or information that is compromised during a wireless transmission.

Frequency band used

This system uses the 2.4 GHz frequency band.

Certification of this device

≥ This system conforms to frequency restrictions and has received certification based on frequency laws. Thus, a wireless permit is not necessary.

≥ The action below are punishable by law in some countries: j Taking apart or modifying the unit.

j Removing specification indications.

Restrictions of use

≥ Wireless transmission and/or usage with all

Bluetooth ® equipped devices is not guaranteed.

≥ All devices must conform to standards set by

Bluetooth SIG, Inc.

≥ Depending on the specifications and settings of a device, it can fail to connect or some operations can be different.

≥ This system supports Bluetooth ® security features. But depending on the operating environment and/or settings, this security is possibly not sufficient. Transmit data wirelessly to this system with caution.

≥ This system cannot transmit data to a

Bluetooth ® device.

Range of use

Use this device at a maximum range of 10 m.

The range can decrease depending on the environment, obstacles or interference.

Interference from other devices

≥ This system may not function properly and troubles such as noise and sound jumps may arise due to radio wave interference if the main unit is located too close to other Bluetooth ® devices or the devices that use the 2.4 GHz band.

≥ This system may not function properly if radio waves from a nearby broadcasting station, etc. are too strong.

Intended usage

≥ This system is for normal, general use only.

≥ Do not use this system near equipment or in an environment that is sensitive to radio frequency interference (example: airports, hospitals, laboratories, etc.).

TQBM0479 3

SC-HTB900-EGEBGN-TQBM0479_eng.book 4 ページ 2019年4月16日 火曜日 午後7時58分

Table of contents

Safety precautions ..........................2

About Bluetooth

®

............................ 3

Supplied items................................. 4

Before use

Control reference guide.................. 5

Getting started

Step 1 Connections........................ 8

Step 2 Placement.......................... 12

Step 3 Active subwoofer wireless connection ................................... 16

Step 4 Network settings............... 16

Operations

Using this system.......................... 18

Streaming music over the network ......................... 19

Bluetooth ® operations .................. 20

Sound menu................................... 21

Setup menu.................................... 22

Linked operations with the TV

(VIERA Link

“HDAVI Control TM ”) .................... 24

Reference

Troubleshooting ............................ 26

Unit care ......................................... 31

Licenses ......................................... 31

Specifications ................................ 32

Supplied items

This system (SC-HTB900)

∏ 1 Main unit (speaker) (  5)

(SU-HTB900)

∏ 1 Active subwoofer (  5)

(SB-HWA900)

Accessories

Check the supplied accessories before using this system.

∏ 1 Remote control (with a battery) (  7)

(N2QAYC000121)

∏ 1 IR Blaster (  10)

(K2ZZ02C00007)

∏ 2 Wall mount brackets (  14)

(TUWX2111)

∏ 2 AC mains lead (  11)

For the United Kingdom and Ireland

(K2CT2YY00089)

For Continental Europe

(K2CQ2YY00164)

For Australia and New Zealand

(K2CJ2YY00123)

∏ 2 Screws (  14)

(XYN5+J14FJK)

≥ Product numbers are correct as of April 2019. These may be subject to change.

≥ The supplied AC mains lead is for use with this system only.

Do not use it with other equipment. Also, do not use cords from other equipment with this system.

About descriptions in these operating instructions

≥ Pages to be referred to are indicated as “  ±± ”.

≥ Labels on this unit and the remote control are indicated as [ ±± ] in these operating instructions.

≥ The illustrations shown may differ from your unit.

≥ These operating instructions are applicable to model SC-HTB900 for variety of regions. Unless otherwise indicated, illustrations in these operating instructions are of the model for the United Kingdom and Ireland.

≥ Operations in this operating instructions are described mainly with the remote control, but you can perform the operations on the main unit if the controls are the same.

4 TQBM0479

SC-HTB900-EGEBGN-TQBM0479_eng.book 5 ページ 2019年4月16日 火曜日 午後7時58分

Control reference guide

This system (Front)

1*

5

2* 3* 4*

Main unit

(SU-HTB900) 6 7 8

9

Active subwoofer

(SB-HWA900)

1 [ Í /I ] Standby/on switch ( Í /I )*

Touch to switch the unit from on to standby mode or vice versa. In standby mode, the unit is still consuming a small amount of power.

2 [VOL j ] [VOL i ] Adjust the volume of this system* (  18)

3 [INPUT] Select the input source* (  18)

4 [ ]*

≥ Select the Bluetooth ® device as the source

(  18)

≥ Bluetooth ® pairing (  20)

≥ Disconnecting a Bluetooth ® device (  20)

5 Cooling fan

6 Remote control signal sensor (  7)

7 Display

8 Indicator

≥ This flashes 2 times when playback is started or when the power is turned on from the app.

9 WIRELESS LINK indicator (  16)

* These switches work just by touching the marks. Each time you touch the switch, there will be a beep sound.

The beep sound setting can be changed.

(  22)

≥ Do not place objects in front of this system.

≥ Do not place objects on the top surface of the main unit.

≥ Regularly remove dust, etc., from this system. (  31,

“Clean this system with a soft, dry cloth”)

TQBM0479 5

SC-HTB900-EGEBGN-TQBM0479_eng.book 6 ページ 2019年4月16日 火曜日 午後7時58分

This system (Others)

Main unit

(Bottom)

1

2

3

4

5

6

7

8

10

1

9

1 AC IN ( ) terminal (  11)

2 HDMI AV OUT (TV (ARC)) terminal (ARC compatible) (  8)

3 HDMI AV IN (HDMI 2) terminal (  10)

4 HDMI AV IN (HDMI 1) terminal (  10)

5 LAN terminal (  17)

6 OPTICAL DIGITAL AUDIO IN (TV) terminal

(  8)

7 Ir SYSTEM terminal (  10)

8 [ BÍ C I] Active subwoofer on/off button

(  16)

9 [I/D SET] I/D SET button

This is only used when the main unit is not paired with the active subwoofer. (  29)

10 Ventilation holes

Active subwoofer

(Rear)

The symbols on this product represent the following.

AC

Class II equipment (The construction of the product is double-insulated.)

6 TQBM0479

SC-HTB900-EGEBGN-TQBM0479_eng.book 7 ページ 2019年4月16日 火曜日 午後7時58分

Remote control

Before using for the first time

Remove the insulation sheet A .

1

2

3

4

INPUT

SETUP SOUND

 OK 

5

6

7

8

≥ Dispose of the insulation sheet responsibly after removing it.

To replace a button-type battery

Battery type: CR2025 (Lithium battery)

1 [ Í ] Switch the main unit from on to standby or vice versa (  18)

2 [INPUT] Select the input source (  18)

3 [SETUP] Select the setup menu (  22)

4 [SOUND] Select the sound menu (  21)

5 [ -PAIRING]

≥ Select the Bluetooth ® device as the source

(  18)

≥ Bluetooth ® pairing (  20)

≥ Disconnecting a Bluetooth ® device (  20)

6 [ i VOL j ] Adjust the volume of this system

(  18)

7 [MUTE] Mute the sound (  18)

8 [ 4 ][OK][ 3 ] Select and confirm the option

≥ Set the button-type battery with its ( i ) mark facing upward.

About remote control signal sensor

The remote control signal sensor is located on the main unit.

≥ Use the remote control within the correct operation range.

Distance: Within approx. 7 m directly in front

Angle: Approx. 30 o left and right

TQBM0479 7

SC-HTB900-EGEBGN-TQBM0479_eng.book 8 ページ 2019年4月16日 火曜日 午後7時58分

Step 1 Connections

Turn off all equipment before connection and read the appropriate operating instructions.

Do not connect the AC mains lead until all other connections are completed.

When connecting to 4K compatible equipment and 4K Ultra HD TV, use High Speed HDMI cables which support 18 Gbps bandwidth.

Connection with the TV

Verify if the TV’s HDMI terminal is labelled “HDMI (ARC)”.

Labelled “HDMI (ARC)” Not Labelled “HDMI (ARC)”

HDMI IN (ARC)

TV

Be sure to connect to the TV’s ARC compatible terminal. (Refer to the operating instructions for the TV.)

A HDMI cable

HDMI IN OPTICAL OUT

TV

A HDMI cable

B Optical digital audio cable

≥ When you use the optical digital audio cable, insert the tip correctly into the terminal.

What is ARC?

ARC is an abbreviation of Audio Return Channel, also known as HDMI ARC. It refers to one of the HDMI functions. When you connect the main unit to the terminal labelled “HDMI (ARC)” on the TV, the optical digital audio cable that is usually required in order to listen to sound from a TV is no longer required, and TV pictures and sound can be enjoyed with a single HDMI cable.

8 TQBM0479

SC-HTB900-EGEBGN-TQBM0479_eng.book 9 ページ 2019年4月16日 火曜日 午後7時58分

Connection with players, etc., supporting HDR10+ and Dolby

Vision

TM

This system does not support HDR10+ and Dolby Vision TM . When connecting to a player, TV, etc., that supports HDR10+ or Dolby Vision TM , use the following connection.

≥ The name of the terminal may be different depending on the device that supports HDR10+. Refer to the operating instructions of the supporting device for details.

≥ If you connect this system and are then unable to view Netflix, use the following connection.

≥ VIERA Link does not work when you use this connection. (  24)

HDMI

AUDIO OUT HDMI IN

(ARC)

*

HDMI

VIDEO OUT

HDMI IN

TV

Player, etc., supporting HDR10+

A HDMI cable

* If this terminal does not support ARC, also use an optical digital audio cable to connect the main unit and the TV. (  8, “Not Labelled “HDMI (ARC)””)

TQBM0479 9

SC-HTB900-EGEBGN-TQBM0479_eng.book 10 ページ 2019年4月16日 火曜日 午後7時58分

Connection from an HDMI compatible device

You can direct the audio signal from the connected Blu-ray Disc player, DVD player, Set

Top Box, etc. to this system.

Preparation

≥ Connect the main unit to the TV. (  8)

Using the IR Blaster

(When the remote control does not work properly)

Depending on how the main unit is setup, it may block the TV’s remote control signal sensor, stopping the TV’s remote control from working.

Use the supplied Ir system cable if this occurs.

The TV remote control signals received by the main unit are sent to the TV to operate it.

≥ For the operation range, refer to page 7.

≥ Do not use any other IR Blaster except the supplied one.

1 Connect the jack plug to the main unit’s Ir SYSTEM terminal.

HDMI OUT e.g.,

Blu-ray Disc player

A HDMI cable

HDMI OUT e.g.,

Set top box

≥ Refer to the operating instructions of the connected HDMI compatible device for the necessary setting, to output the video and audio signals.

A IR Blaster (supplied)

B Adhesive tape (supplied)

2 Place the infrared emitter in sight of the TV’s remote control signal sensor.

Placement example

On the rear of the main unit:

C TV remote control signal sensor

D Infrared emitter

E Adhesive tape (supplied)

10 TQBM0479

SC-HTB900-EGEBGN-TQBM0479_eng.book 11 ページ 2019年4月16日 火曜日 午後7時58分

3 Aim the TV’s remote control at this system’s remote control sensor and operate the TV.

AC mains lead connection

≥ Connect only after all other connections are completed.

*

≥ For the location of the TV’s remote control signal sensor, refer to the operating instructions for the TV.

≥ Select a location that suits the environment.

≥ Make sure to clean the surface, where the adhesive tape is to be attached.

≥ If you peel off the adhesive tape, the surface may become damaged and exposed adhesive may remain. Once you have confirmed the TV is operating correctly, secure it by attaching the adhesive tape.

≥ When the TV receives signals from both its remote control and the IR Blaster, their signals may interfere with each other, making it impossible for you to operate the TV.

Try using the TV’s remote control from a different angle.

A To a household mains socket

B AC mains lead (supplied)

* Insert the AC mains lead fully into the main unit.

If the TV remote control does not work even after you have adjusted its angle, do not use the IR Blaster. Install the main unit so that the TV’s remote control signal sensor is visible from the position where you operate the TV remote control.

≥ This system consumes a small amount of AC power (  32) even when it is turned off. In the interest of power conservation, if you will not be using this system for a long time, unplug it from the household mains socket.

Saving energy

The main unit is designed to conserve its power consumption and save energy.

≥ The main unit will automatically switch to standby mode when no signal is input and no operation is performed for approx. 20 minutes. Refer to page 22, “AUTO OFF” to turn this function off.

TQBM0479 11

SC-HTB900-EGEBGN-TQBM0479_eng.book 12 ページ 2019年4月16日 火曜日 午後7時58分

Step 2 Placement

Safety Precautions

The active subwoofer

When carrying the active subwoofer

Take care not to damage the inside speaker unit.

Professional installation is required.

The installation should never be done by any other than a qualified installation specialist.

PANASONIC DISCLAIMS ANY PROPERTY

DAMAGE AND/OR SERIOUS INJURY,

INCLUDING DEATH RESULTING FROM

IMPROPER INSTALLATION OR INCORRECT

HANDLING.

≥ Be sure to install the main unit as indicated within this operating Instructions.

≥ Attach using techniques suited to the structure and materials of the installation location.

Caution

≥ This system is to be used only as indicated in these instructions. Failure to do so may lead to damage to the amplifier and/or the speaker, and may result in the risk of fire.

Consult a qualified service person if damage has occurred or if you experience a sudden change in performance.

≥ Do not attempt to attach the main unit to a wall using methods other than those described in this manual.

A

B

A Do not hold the active subwoofer from this opening.

The parts inside may get damaged.

B Always hold the bottom of the active subwoofer when moving it.

Wireless interference

Interference may occur if you are using other devices (wireless LAN/microwave ovens/ cordless phones, etc.) that use the 2.4 GHz frequency band, causing some communication problems (sound is interrupted, sound skips, there is a lot of noise, etc.).

If this happens, separate the other electronic equipment from the main unit and active subwoofer so that interference does not occur.

≥ Do not hold the main unit in one hand to avoid injury, you may drop the main unit when carrying it.

≥ To prevent damage or scratches, lay down a soft cloth and perform the assembly on it.

≥ Place the active subwoofer within a few meters of the main unit and in a horizontal position with the top panel facing upward.

≥ Do not use the main unit or the active subwoofer in a metal cabinet.

≥ Placing the active subwoofer too close to the walls and corners can result in excessive bass. Cover walls and windows with thick curtains.

≥ Keep magnetised items away. Magnetised cards, watches, etc., can be damaged if placed too close to the main unit and active subwoofer.

B

A

A Main unit/active subwoofer

B Wireless router, cordless phone and other electronic devices

12 TQBM0479

SC-HTB900-EGEBGN-TQBM0479_eng.book 13 ページ 2019年4月16日 火曜日 午後7時58分

When placing the main unit in a rack or on a table

Additionally required accessories (commercially available)

≥ Fall prevention cord ..................................................................................................................... k 2

≥ Screw eyes (to attach the fall prevention cord) ............................................................................ k 2

≥ Use commercially available screws that are capable of supporting over 60 k g .

≥ Use a cord that is capable of supporting over 60 k g (with a diameter of about 1.5 mm).

≥ Lay the unit on a blanket or soft cloth for assembly.

1 Attach the cord to the main unit.

 

(Bottom)

A Cord*

* If the cord cannot be threaded through the holes, try bending the cord in 2 locations, about 5 mm apart from the tip, at an angle of 45 o (as illustrated above).

2 Place the main unit in the desired position and attach each cord onto the rack or table.

≥ Make sure that the slack of the cord is minimal.

≥ Do not lean the main unit against the TV or wall.

B Screw eye

≥ Attach at a position capable of supporting over 60 k g .

≥ Depending on the placement of the main unit, the screwing position of the screw eye may differ.

When placing the main unit in front of the TV

The main unit may block or interfere with the TV’s various sensors (C.A.T.S. (Contrast Automatic

Tracking System) sensor, remote control sensor, etc.) and the 3D Eyewear transmitters on a 3D compatible TV.

≥ If interference occurs, move the main unit further away from the TV. If the TV still does not function correctly, try using it in a rack or in the wall mount position.

TQBM0479 13

SC-HTB900-EGEBGN-TQBM0479_eng.book 14 ページ 2019年4月16日 火曜日 午後7時58分

When attaching the main unit to a wall

The main unit can be wall mounted using the supplied wall mount brackets, etc. Make sure that the screw used and the wall are strong enough to support the weight of at least 60 k g .

The screws and other items are not supplied as the type and size will vary with each installation.

≥ Refer to step 3 for details about the required screws.

≥ Be sure to attach the fall prevention cord as a secondary safety measure.

Supplied accessories

∏ 2 Screws ∏ 2 Wall mount brackets

Additionally required accessories (commercially available)

≥ Screws for wall mounting............................................................................................................. k 2

≥ Fall prevention cord ..................................................................................................................... k 2

≥ Screw eyes (to attach the fall prevention cord) ........................................................................... k 2

≥ Use a cord that is capable of supporting over 60 k g (with a diameter of about 1.5 mm).

≥ Lay the unit on a blanket or soft cloth for assembly.

1 Perform steps 1 in “When placing the main unit in a rack or on a table”. (

13)

2 Attach the wall mount brackets to the main unit.

(Rear)

A Wall mount bracket (supplied)

B Screw (supplied)

14 TQBM0479

SC-HTB900-EGEBGN-TQBM0479_eng.book 15 ページ 2019年4月16日 火曜日 午後7時58分

3 Drive a screw into the wall.

≥ Use the measurements indicated below to identify the screwing positions on the wall.

≥ Leave at least 200 mm of space above of the main unit to allow enough space for fitting the main unit.

≥ Be sure to use a level to ensure that both mounting holes are level to each other.

Front view (semi-transparent image)

C At least 30 mm

D ‰ 4.0 mm

E ‰ 7.0 mm to ‰ 9.4 mm

F Wall or pillar

G 2.5 mm to 4.5 mm

 

H 700 mm

K 8 mm

I 175 mm

L 89 mm

4 Fit the main unit securely onto the screw(s).

J 175 mm

M Wall mounting hole

DO

≥ Move the speaker so that the screw is in this position.

5 Secure the cord to the wall.

≥ Make sure that the slack of the cord is minimal.

A Screw eye

B Cord

DO NOT

≥ In this position, the speaker will likely fall if moved to the left or right.

TQBM0479 15

SC-HTB900-EGEBGN-TQBM0479_eng.book 16 ページ 2019年4月16日 火曜日 午後7時58分

Step 3 Active subwoofer wireless connection

Preparation

≥ Turn on the main unit.

1 Press [

BÍ C

I].

Step 4 Network settings

You can stream online music services.

To use these features, this unit must join the same internet-connected network as the device.

≥ Please update the system’s firmware after the network settings are complete. (  23,

“Firmware update”)

Active subwoofer on/off button [ BÍ C I]

Use this button to turn the active subwoofer on and off.

C I:

The active subwoofer is on.

BÍ :

The active subwoofer is off.

The active subwoofer will still consume a small amount of power even when it is turned off

( B , Í ).

2 Check that the wireless link is activated.

Choose a network setting method from the following.

Wireless LAN connection

Method 1:

Using the “Google Home” app (  17)

≥ You can establish the wireless network settings with the “Google Home” app (free of charge).

Wired LAN connection

Method 2:

Using a LAN cable (  17)

≥ You can establish a stable connection to the network with a LAN cable.

≥ The setting will be cancelled after the set time limit. Redo the setup.

WIRELESS LINK indicator

Lights red:

The wireless link is not activated.

Lights green:

The wireless link is activated.

Blinks green:

The active subwoofer is trying to activate the wireless link with the main unit.

≥ The wireless link will be activated when the main unit and the active subwoofer are both turned on.

16 TQBM0479

SC-HTB900-EGEBGN-TQBM0479_eng.book 17 ページ 2019年4月16日 火曜日 午後7時58分

Method 1:

Using the “Google Home” app

Preparation

This system has a built-in Wi-Fi ® and can be connected to a wireless router.

≥ Disconnect a LAN cable.

– Doing so will disable the Wi-Fi ® function.

When a LAN cable has been connected to this system, disconnect the LAN cable after disconnecting the AC mains lead. Reconnect the AC mains lead after this.

≥ Make sure your smartphone or tablet is connected to the same network as this system.

Method 2:

Using a LAN cable

e.g., LAN cable (not supplied)

Broadband router, etc.

1 Turn this system on.

2 Download the “Google Home” app

(free of charge) onto your smartphone or tablet.

≥ To download the “Google Home” app, visit: https://www.google.com/cast/setup/

1 Disconnect the AC mains lead.

2 Connect the main unit to a broadband router, etc. using a LAN cable.

3 Connect the AC mains lead to the main unit and turn this system on.

≥ When the connection is established, “ on the main unit’s display.

” is indicated

4 Start the “Google Home” app and follow the on-screen instructions to set up a connection.

≥ To use the Chromecast-enabled apps with this unit

(  19)

3 Start the app and follow the on-screen instructions.

4 Check that the connection has completed.

≥ When the connection is established, “ ” is indicated on the main unit’s display.

≥ If Wi-Fi connection is not possible, make sure that “Wi-Fi” in the Setup menu is set to “ON”. (  23, “Wi-Fi”)

≥ Wireless connection of the “Google Home” app may fail sometimes. Restore the factory settings on the main unit if this occurs.(  26, “To return to the factory preset.”)

≥ This system will be displayed as “Panasonic HTB900-****” if the device name is not set.

(“****” stands for characters unique to each set.)

This system's name can be changed with the app “Google

Home” (  above).

≥ You can check your network information (SSID, MAC address and IP address) from the “Google Home” app or the setup menu of this system.

To check on this system, refer to “NET INFO”. (  23)

≥ Some items on the “Google Home” app are irrelevant to this system.

≥ Use category 7 or above straight LAN cables (STP) when connecting to peripheral devices.

≥ The LAN cable must be connected or disconnected while the AC mains lead is disconnected.

≥ Inserting any cable other than a LAN cable in the LAN port can damage the system.

≥ If the LAN cable is disconnected, redo the network settings.

≥ When a LAN cable is connected, the Wi-Fi function will be disabled.

TQBM0479 17

SC-HTB900-EGEBGN-TQBM0479_eng.book 18 ページ 2019年4月16日 火曜日 午後7時58分

Preparation

≥ Turn on the active subwoofer.

≥ Turn on the TV and/or connected device.

1

2

To adjust the volume of this system

Press [ i VOL j ].

≥ Volume range: 0 to 100

To mute the sound

Press [MUTE].

≥ While muting, “MUTE” is indicated on the display.

≥ To cancel, press the button again or adjust the volume.

≥ Muting is cancelled if the main unit is turned off.

INPUT

SETUP SOUND

 OK

1 Press [

Í

] to turn on the main unit.

2 Select the source.

Press

[INPUT]

To select

Input changes in the following order each time you press

[INPUT].

“TV” --# “HDMI 1” -# “HDMI 2”

^- “NETWORK” ( “BLUETOOTH” (}

If this system does not operate as expected or sound is unusual, returning the settings to the factory preset may solve the problem. (  26)

≥ If there is sound coming out of the TV’s speakers, reduce the volume of the TV to its minimum.

≥ There may be a difference in the maximum volume value of the TV and the unit.

≥ When playing equipment connected to the HDMI AV IN terminal, to switch audio/video to the TV, switch input to the

TV tuner. If VIERA Link (HDMI) (  24) is not enabled, also switch the input of this unit to TV.

[ -PAIRING]

Select the Bluetooth the source. (  20)

® device as

≥ This remote control cannot be used to control the operations of the connected devices.

When you select “HDMI 1” or

“HDMI 2”

Change the input on the TV to the one this unit is connected to, then start play on the device connected to this unit.

When you select “BLUETOOTH”

Start play on the Bluetooth ® device connected to this unit.

Remote control code

When other Panasonic devices respond to this system’s remote control, change the remote control code on this system and the remote control.

Preparation

≥ Turn off all other Panasonic products.

≥ Turn on the main unit.

≥ Aim the remote control at this unit’s remote control sensor.

To set the code to “REMOTE 2”

While pressing and holding [MUTE], press and hold [OK] for more than 4 sec.

“REMOTE 2” is indicated on the display.

To set the code to “REMOTE 1”

While pressing and holding [MUTE], press and hold [ 4 ] for more than 4 sec.

“REMOTE 1” is indicated on the display.

18 TQBM0479

SC-HTB900-EGEBGN-TQBM0479_eng.book 19 ページ 2019年4月16日 火曜日 午後7時58分

Streaming music over the network

You can stream online music services or music files from your smartphone/tablet to this system.

Streaming online music

This system is compatible with Chromecastenabled apps. For the list of Chromecast-enabled apps, visit: g.co/cast/apps

Preparation

≥ Complete the network settings. (  16)

≥ Make sure that the network is connected to the

Internet.

≥ Make sure your smartphone or tablet is connected to the same network as this system.

1 Turn this system on.

≥ Check that “ ” is indicated on the display.

– If it is not indicated or blinks, check the network settings. (  16)

2 Download the Chromecast-enabled app onto your smartphone or tablet.

3 Start the Chromecast-enabled app and tap the Cast icon .

4 Select this system or group which this system is included.

≥ “CASTING” will be indicated on the main unit’s display.

≥ Use the “Google Home” app to group speakers when streaming online music to other compatible speakers.

5 Select and play the desired music on your Chromecast-enabled app.

Not all music streaming services are available in all countries/regions. Registration/ subscription may be required, or fees may be charged to use music streaming services.

Services are subject to change or be discontinued. For details, visit an individual music streaming service’s website.

Important notice:

Before you dispose of or transfer this unit to a third party, be sure to log out of your music streaming services accounts to prevent unauthorised use of your accounts.

TQBM0479 19

SC-HTB900-EGEBGN-TQBM0479_eng.book 20 ページ 2019年4月16日 火曜日 午後7時58分

Bluetooth

®

operations

By using the Bluetooth ® connection, you can listen to the sound of the Bluetooth ® audio device from this system wirelessly.

≥ Refer to the operating instructions of the Bluetooth ® device for further instruction on how to connect a Bluetooth ® device.

Preparation

≥ Turn on the Bluetooth ® feature of the device and place the device near the main unit.

Bluetooth

®

pairing

1 Press [ -PAIRING] to select

“BLUETOOTH”.

≥ If “PAIRING” is indicated on the display, go to step 3.

2 Press and hold [ -PAIRING] until

“PAIRING” is indicated on the display.

3 Select “Panasonic HTB900-****” from the Bluetooth

®

device’s Bluetooth

®

menu.

≥ If the device name is set on the “Google Home” app, the set name is displayed. The device name can be changed with the dedicated application “Google

Home”. (  17)

≥ The MAC address (an alphanumeric character string that is displayed by and unique to the device) may be displayed before the device name is displayed.

≥ If prompted for the passkey on the Bluetooth ® device, enter “0000”.

≥ Once the Bluetooth ® device is connected, the name of the connected device will be indicated on the display for a few seconds.

≥ If you register more than 8 devices, ones that have not been connected for a long period of time may be deleted from the list of registered devices. In that case, pair with the deleted devices again.

Connecting a paired

Bluetooth

®

device

1 Press [ -PAIRING] to select

Bluetooth

®

mode.

2 After confirming that “BLUETOOTH

READY” is indicated on the display, select “Panasonic HTB900-****” from the Bluetooth

®

device’s Bluetooth

®

menu.

≥ If the device name is set on the “Google Home” app, the set name is displayed. The device name can be changed with the dedicated application “Google

Home”. (  17)

Disconnecting a Bluetooth

®

device

Press and hold [ -PAIRING] until the

“BLUETOOTH READY” is indicated on the display.

≥ When “BLUETOOTH” is selected as the source, this system will automatically try and connect to the last connected Bluetooth ® device. If the connection attempt fails, try to establish a connection again.

≥ This system can only be connected to one device at a time.

≥ To change the sound quality, refer to “LINK MODE”. (  22)

≥ When enjoying video contents with this function, the video and audio output may not be synchronised.

20 TQBM0479

SC-HTB900-EGEBGN-TQBM0479_eng.book 21 ページ 2019年4月16日 火曜日 午後7時58分

Sound menu

1 Press [SOUND] repeatedly to select the sound effect and then press [OK].

≥ You can also press [ 4 ] or [ 3 ] repeatedly to select the setup item.

2 Press [

4

] [

3

] repeatedly to select the desired setting and then press [OK].

∫ CLR DIALOG

You can change the level of dialogue clarity when you want to emphasise people’s voices, etc.

Of the levels “LEVEL 1” to “LEVEL 4”, the effect increases the higher the level number.

If the sound becomes unnatural, select “OFF”.

∫ SOUND MODE

Select the sound mode to suit the TV programme or connected equipment.

STANDARD: Best suited for dramas and comedy shows.

STADIUM: Produces a realistic sound for live sports broadcasts.

MUSIC: Enhance the sound of musical instruments and songs.

CINEMA: Produces three-dimensional sound unique to movies.

NEWS: Enhance the voice of news and sports commentaries.

STRAIGHT * 1 : Output is 2.1 channels during stereo playback and 3.1 channels during multichannel playback.

∫ DTS:X DIALOG CONTROL* 2

You can change the level of dialogue clarity when you want to emphasise people’s voices, etc.

This has an effect only when playing back DTS:X content.

Of the levels “LEVEL 0” to “LEVEL 6”, the effect increases the higher the level number.

®

∫ DUAL AUDIO* 2

Sets the preferred audio channel mode when there are two audio modes received by this system.

M1: Main

M2: Secondary

M1+M2: Main + Secondary

This effect only works if the audio output of the TV or player is set to “Bitstream” and “Dolby Dual

Mono” is available in the sound source.

∫ 3D SURROUND* 1 * 2

This system not only pushes the sound field out to the left and right, but also upwardly to help realise an immersive sound effect.

e.g., Impression of the 3D surround effect

∫ DRC* 2

You can listen at low volumes but still hear dialogue clearly.

If the sound becomes unnatural, select “OFF”.

≥ When playing back “Dolby TrueHD” audio, if “AUTO” is selected, then depending on the content, the effect output may be the one when “ON” is selected.

∫ AGC

Auto gain control prevents sudden loud sound by reducing the sound level automatically when the input is too high.

This function is suitable for TV broadcast that has sound level difference.

If the sound becomes unnatural, select “OFF”.

If the sound becomes unnatural, select “OFF”.

≥ The surround effect depends on the source.

≥ This works only when the input selected is “TV”, “HDMI 1”, or “HDMI 2”.

∫ SUBWOOFER

You can adjust the amount of bass.

Of the levels “LEVEL 1” to “LEVEL 4”, the effect increases the higher the level number.

∫ LOW VOL MODE

Enhance the dialogue in low volume condition.

Select “OFF” to cancel this effect if the dialogue does not sound natural in low volume condition.

TQBM0479 21

SC-HTB900-EGEBGN-TQBM0479_eng.book 22 ページ 2019年4月16日 火曜日 午後7時58分

∫ WALL MOUNT

Select the appropriate speaker placement mode to suit your placement method. This system will adjust the sound effect according to the placement mode setting.

ON : For wall mounting layout

OFF : For table top layout

Setup menu

1 Press [SETUP] repeatedly to select the setup item and then press [OK].

≥ You can also press [ 4 ] or [ 3 ] repeatedly to select the setup item.

2 Press [

4

] [

3

] repeatedly to select the desired setting and then press [OK].

≥ Changed settings will be kept until it is changed again, unless otherwise indicated.

*1 The “SOUND MODE” cannot be set to “STRAIGHT” at the same time that “3D SURROUND” is set to “ON”, and vice versa.

*2 Effects are disabled when the input selected is

“BLUETOOTH” or “NETWORK”. It is also not possible to change the settings.

Audio format

You can view the current audio format.

Press and hold [SOUND] for more than 4 sec.

≥ The audio format is displayed for about 3 seconds.

≥ No audio format is displayed if input to this unit is

Bluetooth ® or the network.

∫ DIMMER

Switch the brightness of the display.

≥ While “DISPLAY OFF” is set, the display lights for about

5 seconds if operations are performed on the main unit or with the remote control.

≥ While “DISPLAY OFF” is set, a part of the display lights if the display is off but the main unit is on.

∫ BEEP

A beep sounds when you touch the switch on the main unit or when you turn the unit on/off.

≥ This works during muting as well.

∫ AUTO OFF

The main unit automatically is turned off if there is no audio input and when you do not use it for approx. 20 minutes.

≥ When this is set, the display shows “P.OFF 1MIN” to indicate that the main unit will turn off in approximately 1 minute.

≥ If “STANDBY MODE” or “VIERA LINK” is set to “ON”, this function will also be set to “ON”. To change the setting, set

“STANDBY MODE” and “VIERA LINK” to “OFF”. (  23)

∫ VOL LIMITATION

When this function is set to “ON”, if the volume exceeds 50 when the main unit is turned off, then the volume is set to 50 when the main unit is turned on.

∫ LINK MODE

Change the Bluetooth ® transmission mode to prioritise transmission quality or sound quality.

Make sure that the Bluetooth ® device is not connected (“BLUETOOTH READY” is indicated on the display).

MODE 1 : Emphasis on connectivity.

MODE 2 : Emphasis on sound quality.

≥ The default setting is “MODE 2”.

22 TQBM0479

SC-HTB900-EGEBGN-TQBM0479_eng.book 23 ページ 2019年4月16日 火曜日 午後7時58分

∫ VIERA LINK

Turn on the VIERA Link function.

Select “OFF” when your HDAVI Control device does not work correctly with this system.

≥ ARC will be disabled. Connect an optical digital audio cable.

≥ Turn off all connected devices and then turn them on again after changing the setting.

∫ STANDBY MODE

When this function is set to “ON”, then the main unit automatically turns on in the following cases.

– When a Bluetooth ® connection is established to the main unit from a paired Bluetooth ® device.

– When playback operations are performed on the main unit from a device connected to the network.

≥ The default setting is “ON”.

≥ If this function is set to “ON”, the standby power consumption will increase. (  32)

∫ Wi-Fi

The wireless LAN function can be enabled or disabled.

∫ F/W VERSION

You can check the firmware version.

≥ Press [ 4 ] [ 3 ] to select “FIRMWARE” or “CHROMECAST

BUILT-IN” and then press [OK].

– When you select “FIRMWARE”, the version of the installed firmware is displayed.

– When you select “CHROMECAST BUILT-IN”, the version of Chromecast built-in is displayed.

Press [OK] again to stop the display.

∫ F/W UPDATE

You can update the firmware of this system.

≥ For details, refer to “Firmware update” (  below)

≥ Changed settings will be kept until it is changed again, unless otherwise indicated.

Firmware update

Occasionally, Panasonic may release updated firmware for this system that may add or improve the way a feature operates. These updates are available free of charge.

For the latest information, refer to the site below.

https://panasonic.jp/support/global/cs/audio/

(This site is in English only.)

∫ Wi-Fi SIGNAL LEVEL

You can check the signal strength of the wireless connection.

≥ The signal strength is displayed when you press [OK] while

“Wi-Fi SIGNAL LEVEL” is being displayed.

Press [OK] again to stop the display.

≥ It is recommended to have a signal strength of “LEVEL 3”.

Change the position or angle of your wireless network router or this system if the indication is “LEVEL 2” or

“LEVEL 1” and see if the connection improves.

≥ If “LEVEL 0” is displayed, this system cannot establish a link with the wireless network router.

≥ “WIRED LAN” is displayed when connected with a LAN cable.

∫ NET INFO

You can confirm the IP address allocated to this system, the MAC address of this system, and the network name (SSID) of this system.

IP ADDRESS

SSID

MAC ADDRESS

≥ Characters that cannot be displayed are replaced with

“ * ”.

∫ RESET

This restores the settings to the factory presets.

≥ For details, refer to “To return to the factory preset.” (  26)

Automatic updates

When a new update is available, this system will update the firmware automatically after midnight if it is not in use.

≥ Complete the network settings. (  16)

– Make sure that the network is connected to the Internet.

(  16)

≥ If an update is detected during the network settings, updating will be performed as a part of the network settings.

≥ If a critical update is detected while the system is in use, updating will be prioritised.

≥ Updating may take longer or may not work properly depending on the connection environment.

TQBM0479 23

SC-HTB900-EGEBGN-TQBM0479_eng.book 24 ページ 2019年4月16日 火曜日 午後7時58分

Manual updates

After connecting to the network,

“NEW FIRMWARE FOUND/PRESS[OK]” is displayed on the display of the main unit when a downloadable piece of new firmware is found.

The “F/W UPDATE” display from step 2 is displayed when you press [OK].

Preparation

≥ Complete the network settings. (  16)

– Make sure that the network is connected to the Internet.

(  16)

1 Press [SETUP] repeatedly to select “F/

W UPDATE” and then press [OK].

≥ You can also press [ 4 ] or [ 3 ] repeatedly to select the setup item.

2 Press [

4

] [

3

] to select “UPDATE YES” and then press [OK] to start the update.

≥ “WAIT” blinks on the display.

DO NOT DISCONNECT the AC mains lead while one of the following messages is displayed.

“UPDATING”, “UPDATE □□□ %” or “ □ / □ □□□ %”

(“ □ ” stands for a number.)

≥ During the update process, no other operations can be performed.

When the update has finished successfully,

“SUCCESS” is displayed.

3 Press [

Í

/I] on the main unit to turn it off, then press [

Í

/I] on the main unit to turn it on.

≥ If there are no updates, “NO NEED” is displayed.

≥ Downloading takes a maximum of approx. 30 minutes. It may take longer or may not work properly depending on the connection environment.

≥ You cannot output sound from this unit while updating the firmware.

≥ To view the TV during update, change the settings on the

TV to have the sound output from the TV’s speakers. Refer to the operating instructions of the TV for details.

Linked operations with the TV

(VIERA Link “HDAVI

Control

TM

”)

What is VIERA Link “HDAVI

Control”?

VIERA Link “HDAVI Control” is a convenient function that offers linked operations of this system, and a Panasonic TV (VIERA) under

“HDAVI Control”.

You can use this function by connecting the equipment with an HDMI cable. See the operating instructions for connected equipment for operational details.

Preparation

1 Confirm that the HDMI connection has been made. (  8, 10)

2 Set the “HDAVI Control” operations on the connected equipment (e.g., TV).

3 For the optimal “HDAVI Control” operations change the following settings on the connected TV* 1 .

≥ Set the default speaker settings to this system.* 2

≥ Set the speaker selection settings to this system.

4 Turn on all “HDAVI Control” compatible equipment and select the TV’s input for this system so that the “HDAVI Control” function works properly.

5 If a device is connected to the HDMI AV IN terminal, start play to check that the picture is displayed on the TV correctly.

When the connection or settings are changed, repeat this procedure.

*1 The availability and function of the settings may vary depending on the TV. Refer to the operating instructions for the TV for details.

*2 If the TV has a default speaker setting within the VIERA

Link setting items, choosing this system as the default speaker will automatically change the speaker selection to this system.

24 TQBM0479

SC-HTB900-EGEBGN-TQBM0479_eng.book 25 ページ 2019年4月16日 火曜日 午後7時58分

≥ VIERA Link “HDAVI Control”, based on the control functions provided by HDMI which is an industry standard known as HDMI CEC (Consumer Electronics Control), is a unique function that we have developed and added. As such, its operation with other manufacturers’ equipment that supports HDMI CEC cannot be guaranteed.

≥ This unit supports “HDAVI Control 5” function.

“HDAVI Control 5” is the standard for Panasonic’s HDAVI

Control compatible equipment. This standard is compatible with Panasonic’s conventional HDAVI equipment.

≥ Please refer to individual manuals for other manufacturers’ equipment supporting VIERA Link function.

What you can do with

VIERA Link

“HDAVI Control”

To make sure that the audio is output from this system, turn the main unit on by using the TV’s remote control and selecting home cinema from the speaker menu of VIERA Link menu.

The availability and function of the settings may vary depending on the TV. Refer to the operating instructions for the TV for details.

Speaker control

You can select whether audio output is from this system or the TV speakers by using the TV menu settings.

Home cinema

This system is active.

≥ When the main unit is in standby mode, changing the TV speakers to this system in the VIERA Link menu will automatically turn the main unit on.

≥ You can control the volume setting of this system using the volume or mute button on the TV remote control.

≥ If you turn off the main unit, TV speakers will be automatically activated.

≥ Audio will automatically be output from this system if the

TV is compatible to VIERA Link “HDAVI Control 4” or later.

TV

TV speakers are active.

≥ The volume of this system is set to its minimum.

Automatic input switching

When the following operations are performed, the main unit will automatically change the input to the corresponding source.

j When play starts on an HDMI connected device.* 3 j When the TV input or the TV channel is changed.

*3 If the speaker output setting on the TV is set to this system, the TV and the main unit turn on automatically

(Power on link).

Power off link

When the TV is turned off, the main unit also turns off automatically.

(This function does not work when

“BLUETOOTH” or “NETWORK” is the source.)

Automatic lip-sync function

(for HDAVI Control 3 or later)

Delay between audio and video is automatically adjusted by adding time-lag to the audio output, enabling you to enjoy smooth audio for the picture.

≥ It may take up to 8 seconds for sound to be output from this unit after turning the TV (VIERA) on. You can reduce the amount of time it takes for sound to be output by using an optical digital audio cable. If you do so, reconnect the

HDMI cable to a non-ARC compatible HDMI terminal on the TV (VIERA). (  8)

≥ The delay information is automatically set if the TV is compatible to VIERA Link “HDAVI Control 3” or later and the VIERA Link is set to on.

The setting causes a sound delay of approximately 0.04 seconds when connected to a Panasonic TV (VIERA) with

VIERA Link (HDMI) version 2 or earlier or a TV from another manufacturer.

TQBM0479 25

SC-HTB900-EGEBGN-TQBM0479_eng.book 26 ページ 2019年4月16日 火曜日 午後7時58分

Before requesting service, make the following checks. If you are in doubt about some of the check points, or if the solutions indicated in the following guide do not solve the problem, consult your dealer for instructions.

If this system does not operate as expected, returning the settings to the factory preset may solve the problem.

To return to the factory preset.

1 Press [SETUP] repeatedly to select

“RESET” and then press [OK].

≥ You can also press [ 4 ] or [ 3 ] repeatedly to select the setup item.

2 Press [ 4 ] [ 3 ] to select “OK?YES” and then press [OK].

≥ “RESET” blinks on the display. After the “RESET” display goes out, “TV” is selected as the source for this system.

≥ The remote control code will return to

“REMOTE 1” when this system is returned to the factory preset. To change the remote control code, refer to “Remote control code”

(  18).

The remote control does not work properly.

≥ The battery is depleted. Replace it with a new one. (  7)

≥ It is possible that the insulation sheet has not been removed. Remove the insulation sheet.

(  7)

≥ It may be necessary to set the code of the remote control again after changing the battery of the remote control. (  18)

≥ Use the remote control within the correct operation range. (  7)

The main unit is automatically switched to standby mode.

“AUTO OFF” function is on.

The main unit will automatically switch to standby mode when no signal is input and no operation is performed for approx. 20 minutes. Refer to page

22 to turn this function off.

The main unit is turned off when the TV’s speakers are selected in the speaker control.

This is a normal feature when using VIERA Link

(HDAVI Control 4 or later). Please read the operating instructions for the TV for details about its power save feature. (  24)

General operation

No power.

≥ Unplug the AC mains lead for at least 3 minutes before plug in again.

≥ After turning the main unit on, if the main unit immediately turns off, unplug the AC mains lead and consult your dealer.

≥ If the main unit does not turn on by turning on

TV (HDAVI Control), turn on the main unit manually.

If the problem persists, refer to “HDMI” in

“Troubleshooting”.

The switches on the main unit do not work.

[ Í /I], [VOL j ], [VOL i ], [INPUT], and [ ] on the main unit are touch keys. Touch the switches with your finger. They may not work if operated with your fingernails or hands wearing gloves.

Colour irregularities on a CRT TV.

If colour irregularities appear on the TV, turn off the TV for about 30 minutes and move TV away from this unit slightly. If this does not fix the problem, move this unit away from the TV.

The TV remote control does not work even when the IR Blaster is connected to the main unit.

When the TV receives signals from both its remote control and the IR Blaster, their signals may interfere with each other, making it impossible for you to operate the TV. Adjust the angle at which you operate the TV remote control.

(  11)

26 TQBM0479

SC-HTB900-EGEBGN-TQBM0479_eng.book 27 ページ 2019年4月16日 火曜日 午後7時58分

HDMI

This system does not operate correctly.

If the HDMI cable is connected to the wrong terminal (HDMI AV IN or HDMI AV OUT), this system will not operate correctly. Turn the main unit off, disconnect the AC mains lead and reconnect the HDMI cable(s). (  8, 10)

When the main unit is turned on or off, audio and video are temporarily disabled.

When the main unit is turned on or off it is normal for the audio and video to be temporarily disabled.

This is not a malfunction. This can occur when the device it is connected to, via HDMI, does not support Panasonic’s VIERA Link feature (HDAVI

Control 3 or later).

VIERA Link related operations no longer function properly.

≥ Check the VIERA Link setting on the connected devices.

j Turn on VIERA Link function on the connected devices.

j Select this system as the speaker in the TV's

VIERA Link menu.

≥ Have you turned the VIERA Link settings off?

(  23)

≥ When the HDMI connections are changed, after a power failure or after the AC mains lead has been removed, VIERA Link operations may not function properly.

j Turn on all the devices that are connected to the TV with an HDMI cable and then turn the

TV on.

j Turn off the VIERA Link settings of the TV and turn it on again. For details refer to the operating instructions for the TV.

j While the main unit and the TV are connected with the HDMI cable, turn on the TV and then remove the main unit’s AC mains lead and reconnect it again.

The images from this system do not appear on the TV.

When outputting in 60p (4K), images may be distorted depending on the HDMI cable. Use High

Speed HDMI cables which support 18 Gbps bandwidth.

Bluetooth

®

Pairing cannot be done.

Check the Bluetooth ® device condition.

The device cannot be connected.

≥ The pairing of the device was unsuccessful or the registration has been replaced. Try pairing the device again. (  20)

≥ This system might be connected to a different device. Disconnect the other device and try pairing the device again.

The device is connected but audio cannot be heard through this system.

For some Bluetooth ® devices, you have to set the audio output to “Panasonic HTB900-****” manually. Read the operating instructions for the device for details.

The first few seconds of audio cannot be heard when using the HDMI connection.

This may occur during DVD-Video chapter playback. Change the digital audio output setting on the connected device from “Bitstream” to

“PCM”.

When operating an HDMI compatible device of a different brand, the main unit reacts in an unwanted manner.

HDAVI Control commands may use a different signal depending on the brand of the device. In this case, turn VIERA Link off. (  23)

Connection is interrupted.

Sound is interrupted/sound skips/there is a lot of noise.

≥ Remove any obstacle between the main unit and the device.

≥ Other devices that use the 2.4 GHz frequency band (wireless router, microwaves, cordless phones, etc.) are interfering. Bring the

Bluetooth ® device closer to the main unit and distance it from the other devices.

≥ Select “MODE 1” for stable communication.

(  22, “LINK MODE”)

If the above does not fix the problem, you may be able to fix the problem by reconnecting this unit and the Bluetooth ® device. (  20)

TQBM0479 27

SC-HTB900-EGEBGN-TQBM0479_eng.book 28 ページ 2019年4月16日 火曜日 午後7時58分

Sound

No sound (or image).

≥ Turn muting off. (  18)

≥ Check the connections to the other devices.

(  8, 10)

≥ Make sure that the received audio signal is compatible with this system. (  32)

≥ Turn this system off and then on again.

≥ If the main unit is connected to the TV with only an HDMI cable, make sure that the TV’s HDMI

≥ terminal is labelled “HDMI (ARC)”. If not, connect using the optical digital audio cable.

(  8)

If the main unit is connected to a Panasonic TV and turned on using the remote control or the touch key on the main unit, sound might not be output from this system. In this case, turn the main unit on using the TV’s remote control.

(  24)

If the connections are correct, there might be a problem with the cables. Redo the connections with different cables.

Check the audio output settings on the connected device.

The dual audio cannot be changed from main to secondary.

If the audio received from the connected device is not “Dolby Dual Mono” or the output setting is not

“Bitstream”, the setting cannot be changed from this system. Change the setting on the connected device.

The dialogue is too persistent or the dialogue does not sound natural.

This system has a function to make the dialogue stand out when the volume is low. ( 

The sound lags behind the image.

21)

Depending on the TV, when this unit is connected to it via Bluetooth audio cable. ( 

®

8)

, the sound output from this unit may lag behind the TV image. Connect this unit and the TV with an HDMI cable/optical digital

Sound stops.

The power of the main unit turns off automatically.

(When the main unit detects a problem, a safety measure is activated and the main unit automatically switches to standby mode.)

≥ There is a problem with the amplifier.

≥ Is the volume extremely high?

If so, lower the volume.

≥ Is this system placed in an extremely hot place?

If so, move this system to a cooler place and wait a few moments and then try to turn it on again.

If the problem persists, confirm the display, turn this system off, remove the AC mains lead cord and consult your dealer. Please be sure to remember the display that was indicated and inform the dealer.

The volume is lowered when the main unit is turned on.

“VOL LIMITATION” is on.

If the main unit is turned off with the volume setting in the greater half (above 50), the main unit will automatically lower the volume to the middle (50) when the main unit is turned on.

(  22)

28 TQBM0479

SC-HTB900-EGEBGN-TQBM0479_eng.book 29 ページ 2019年4月16日 火曜日 午後7時58分

Network Active Subwoofer

Cannot connect to the network.

≥ This system’s Wi-Fi security supports WPA2 TM only. Your wireless router must therefore be

WPA2 TM compatible. For details on the security supported by your router and how to change the settings, please refer to the operating instructions or contact your Internet service provider.

≥ If the network is set to be invisible, make the network visible while you set up the network for this system or make a wired LAN connection.

(  17)

≥ Make sure that the multicast function on the wireless router is enabled.

No power.

Ensure the AC mains lead of the active subwoofer is connected properly.

After turning the subwoofer on, it immediately turns off.

Unplug the AC mains lead and consult your dealer.

No sound from the subwoofer.

≥ Check that the active subwoofer is turned on.

≥ Check that the WIRELESS LINK indicator lights green. (  16)

Cannot select this system as the output speakers.

Make sure that the devices are connected to the same network as this system.

Reconnect the devices to the network.

Turn off and then on the wireless router.

Playback does not start.

The sound is interrupted.

If using the 2.4 GHz band on the wireless router, simultaneous use with other 2.4 GHz devices, such as microwaves, cordless telephones, etc., may result in connection interruptions. Increase the distance between this system and these devices.

j If your wireless router supports 5 GHz band, try using the 5 GHz band.

To change to the 5 GHz band, redo the network settings (  16). Make sure to select your network name (SSID) for the 5 GHz band during the setup.

Do not place this system inside a metal cabinet, for it might block the Wi-Fi signal.

≥ Place this system closer to the wireless router.

≥ If several wireless devices are simultaneously using the same network as this system, try turning off the other devices or reducing their network usage.

≥ Reconnect the devices to the network.

≥ Turn off and then on the wireless router.

≥ Try a wired LAN connection. (  17)

≥ Restart the app.

The WIRELESS LINK indicator lights red.

≥ There is no link between the main unit and the active subwoofer.

j Check that the main unit is turned on.

j Turn the active subwoofer off and then back on. Alternatively, turn the active subwoofer off, disconnect the AC mains lead and then reconnect it.

≥ The active subwoofer and the main unit may not be paired correctly. Try the following operation.

(Wireless pairing)

1 Turn on the main unit and active subwoofer.

2 Press and hold [I/D SET] on the rear of the active subwoofer for more than 3 sec.

(The WIRELESS LINK indicator will blink in red.)

3 While pressing and holding [INPUT] on remote control, touch and hold [VOL i ] on the main unit for more than 4 sec.

(“SUBWOOFER PAIRING” will be indicated on the display.)

≥ When the wireless pairing is successful, “PAIRED” will be indicated on the display for 2 sec and

WIRELESS LINK indicator lights green.

4 Turn the main unit off and on.

≥ Consult your dealer if the problem persists.

TQBM0479 29

SC-HTB900-EGEBGN-TQBM0479_eng.book 30 ページ 2019年4月16日 火曜日 午後7時58分

Main unit displays

“F61”

≥ There is a problem with the amplifier of the system.

≥ Disconnect the AC mains lead and consult the dealer.

“DL ERROR”

The firmware download has failed. Press [OK] to exit. Please try again later.

“FAIL”

Setting has failed. Read the instructions and try again.

“F70 HDMI” / “U701” / “U703”

≥ Check HDMI connection.

≥ Turn off the main unit and then switch it on again.

≥ Disconnect the HDMI cable.

“F703” / “F704”

≥ Turn off the main unit and then switch it on again.

≥ Consult your dealer if the problem persists.

“LINKING”

≥ This system is trying to connect to the last connected Bluetooth ® device when

“BLUETOOTH” is selected.

≥ This system is communicating with the wireless router to complete the network settings.

Depending on the wireless router this process may take a few minutes. Try moving this system closer to the wireless router.

“F76”

≥ There is a problem with the power supply.

≥ Disconnect the AC mains lead and consult the dealer.

“NO CONNECT”

This system cannot connect to the network.

Check the network connection. (  16)

“U704”

This system is receiving unsupported video format signal from the input source.

≥ Change the video resolution setting on the connected device. (Refer to the operating instructions for the device.)

≥ If there is no image, connect the device directly to the TV to change the settings.

“REMOTE  ” (“  ” stands for a number.)

The remote control and this system are using different codes. Change the code on the remote control. (  18)

“WIRED LAN”

Connection to the network is via a wired LAN connection.

≥ When setting up wireless connection, disconnect the LAN cable from this system.

“U705”

The TV’s HDMI terminal connected to the main unit or the TV’s setting is not compatible with the

HDCP 2.2 playback source.

≥ Ensure to connect to the TV’s HDCP 2.2 compatible terminal.

≥ Ensure the TV’s HDMI HDCP setting corresponds to HDCP 2.2.

(Refer to the operating instructions for the TV.)

“Wi-Fi OFF”

The wireless LAN function on this system is disabled.

≥ When setting up wireless connection, set the “Wi-Fi” setting to “ON”. (  23)

“WAIT”

≥ This is displayed, for example, when this system is turning off.

≥ This is flashing when the system is trying to enter a network setting mode.

“ ” blinks

≥ This may occur when, for instance, the network connection is interrupted.

30 TQBM0479

SC-HTB900-EGEBGN-TQBM0479_eng.book 31 ページ 2019年4月16日 火曜日 午後7時58分

Unit care

Clean this system with a soft, dry cloth

≥ When dirt is heavy, wring a cloth moistened in water tightly to wipe the dirt, and then wipe it with a dry cloth.

≥ When cleaning the speakers, use a fine cloth.

Do not use tissues or other materials (towels, etc.) that can fall apart. Small grains may get stuck inside the speaker cover.

≥ Pull out the AC mains lead from the socket before maintenance. Clean the main unit with a soft cloth. To clean the top panel ( A ) of the main unit, use a soft cloth such as cleaning cloth (optional), etc. and wipe it horizontally along its texture.

≥ Never use alcohol, paint thinner or benzine to clean this system.

≥ Before using chemically-treated cloth, carefully read the instructions that came with the cloth.

To dispose or transfer this system

This system may keep the user settings information in the main unit. If you discard the main unit either by disposal or transfer, then follow the procedure to return all the settings to the factory presets to delete the user settings.

(  26, “To return to the factory preset.”)

≥ The operation history may be recorded in the memory of the main unit.

The terms HDMI and HDMI High-Definition Multimedia

Interface, and the HDMI Logo are trademarks or registered trademarks of HDMI Licensing Administrator, Inc. in the United

States and other countries.

HDAVI Control TM is a trademark of Panasonic Corporation.

The Bluetooth ® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by

Panasonic Corporation is under license.

Other trademarks and trade names are those of their respective owners.

Google, Google Home, Chromecast built-in and other related marks and logos are trademarks of Google LLC.

The Wi-Fi CERTIFIED TM Logo is a certification mark of Wi-Fi

Alliance ® .

“Wi-Fi ® ” is a registered trademark of Wi-Fi Alliance ® .

“WPA TM ” and “WPA2 TM ” are trademarks of Wi-Fi Alliance ® .

FLAC Decoder

Copyright (C) 2000,2001,2002,2003,2004,2005,2006,2007,

2008,2009 Josh Coalson

Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met:

– Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer.

– Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution.

– Neither the name of the Xiph.org Foundation nor the names of its contributors may be used to endorse or promote products derived from this software without specific prior written permission.

THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT

HOLDERS AND CONTRIBUTORS “AS IS” AND ANY

EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT

NOT LIMITED TO, THE IMPLIED WARRANTIES OF

MERCHANTABILITY AND FITNESS FOR A PARTICULAR

PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE

FOUNDATION OR CONTRIBUTORS BE LIABLE FOR ANY

DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY,

OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT

LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR

SERVICES; LOSS OF USE, DATA, OR PROFITS; OR

BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON

ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,

STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR

OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF

THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY

OF SUCH DAMAGE.

Licenses

Dolby, Dolby Audio, Dolby Atmos, and the double-D symbol are trademarks of Dolby Laboratories.

For DTS patents, see http://patents.dts.com.

Manufactured under license from DTS, Inc.

DTS, the Symbol, DTS and the Symbol together, DTS:X, the

DTS:X logo, Virtual:X, and the DTS Virtual:X logo are registered trademarks or trademarks of DTS, Inc. in the United

States and/or other countries.

© DTS, Inc. All Rights Reserved.

The product with the Hi-Res Audio logo is conformed to Hi-Res

Audio standard defined by Japan Audio Society.

The logo is used under license from Japan Audio Society.

TQBM0479 31

SC-HTB900-EGEBGN-TQBM0479_eng.book 32 ページ 2019年4月16日 火曜日 午後7時58分

Specifications

AMPLIFIER SECTION

RMS OUTPUT POWER (non-simultaneous drive)

FRONT SPEAKER (L/R)

85 W+85 W

(1 kHz, T.H.D. 10.0 %, 4 Ω, 20 kHz LPF)

FRONT SPEAKER (Centre)

85 W

(1 kHz, T.H.D. 10.0 %, 4 Ω, 20 kHz LPF)

SUBWOOFER

250 W

(100 Hz, T.H.D. 10.0 %, 8 Ω, 20 kHz LPF)

Total RMS OUTPUT POWER

505 W

TERMINALS SECTION

HDAVI Control

This unit supports “HDAVI Control 5” function

HDMI AV input (HDMI 1) input connector

1

Type A (19 pin)

HDMI AV input (HDMI 2) input connector

HDMI AV output (TV (ARC))

1

Type A (19 pin)

1 output connector Type A (19 pin)

Digital Input

Optical digital input (Optical terminal)

Ethernet interface

LAN (100BASE-TX/10BASE-T)

IR Blaster

Terminal Type Φ3.5 mm jack

SPEAKER SECTION

FRONT SPEAKER (L/R) Built in Main set

Type

2 way, 3 speaker (Bass reflex)

Speaker Unit(s)

Woofer

Tweeter

6.5 cm x 2/ch, Cone type

1.6 cm x 1/ch, Dome Type

FRONT SPEAKER (C) Built in Main set

Type

1 way, 2 speaker (Closed)

Speaker Unit(s)

Fullrange

SUBWOOFER

Type

6.5 cm x 2/ch, Cone type

1 way, 1 speaker (Bass reflex)

Speaker Unit(s)

Sub woofer 16 cm x 1, Cone type

GENERAL

Power consumption

Main unit

Active subwoofer

Standby

Main unit

40 W

48 W

0.3 W (Network Standby Off)* 1

2.0 W (Network Standby On with Wireless LAN)* 1

2.0 W (Network Standby On with Wired LAN)* 1

Active subwoofer

Power switch off

0.3 W

The wireless link is not activated

0.6 W

Power supply

Dimensions (W k H k D)

Main unit

For table top layout

AC 220 V to 240 V, 50 Hz

1050 mm k 78 mm k 129 mm

For wall mounting layout

1050 mm k 89 mm k 133 mm

Active subwoofer

180 mm k 408 mm k 306 mm

Mass

Main unit

Approx. 6.0 k g

Active subwoofer

Approx. 5.4 k g

Operating temperature range

0 o C to i 40 o C

Operating humidity range

35 % to 80 % RH (no condensation)

32 TQBM0479

SC-HTB900-EGEBGN-TQBM0479_eng.book 33 ページ 2019年4月16日 火曜日 午後7時58分

Wi-Fi SECTION

Standard

IEEE802.11a/b/g/n/ac

Frequency Band

2.4 GHz band/5 GHz band

Security

WPA2 TM , Mixed mode WPA2 TM /WPA TM

* The WLAN feature of this product shall exclusively be used inside buildings.

WIRELESS SECTION

Wireless module

Frequency Range

2.40335 GHz to 2.47735 GHz

No. of channels

38

Bluetooth

®

SECTION

FORMAT SECTION

HDMI AV input

LPCM (Max 7.1 ch)

Dolby Digital

Dolby TrueHD

Dolby Digital Plus

Dolby Atmos ®

DTS ®

DTS-ES Discrete 6.1

DTS-ES Matrix 6.1

DTS ® 96/24

DTS-HD ® High Resolution Audio

DTS-HD ® Master Audio

DTS-Express

DTS:X ®

HDMI AV input (TV(ARC))

LPCM (2 ch)

Dolby Digital

Dolby Digital Plus

Dolby Atmos ® (Dolby Digital Plus)

DTS ®

DTS-ES Discrete 6.1

DTS-ES Matrix 6.1

DTS ® 96/24

Optical digital input

LPCM (2 ch)

Dolby Digital

DTS ®

DTS-ES Discrete 6.1

DTS-ES Matrix 6.1

DTS ® 96/24

LAN (DMR)

Format Support

WAV/FLAC/AIFF/ALAC

(32, 44.1, 48, 88.2, 96, 176.4,

192 kHz/16, 24 bit)

AAC (32, 44.1, 48, 88.2, 96 kHz/16-320 kbps)

MP3 (32, 44.1, 48 kHz/16-320 kbps)

Bluetooth ® System Specification

Bluetooth ® Ver.4.2

Wireless Equipment Classification

Class 2 (2.5 mW)

Supported Profiles

A2DP/AVRCP

Supported Codec

AAC, SBC

Frequency Band

2.4 GHz Band FH-SS

Operating Distance

Approx. 10 m Line of sight* 2

≥ Specifications are subject to change without notice.

≥ Mass and dimensions are approximate.

≥ Total harmonic distortion is measured by a digital spectrum analyzer.

≥ Uncompressed FLAC files may not operate correctly.

≥ Audio in formats with high-sampling rates is down-sampled to 96 kHz or lower for playback.

*1 “Network Standby” means “STANDBY MODE” and

“VIERA LINK”.

When the other connected devices are turned off.

*2 Prospective communication distance.

Measurement environment: Temperature 25 o C/Height

1.0 m

Measure in “MODE 1”

TQBM0479 33

SC-HTB900-EGEBGN-TQBM0479_eng.book 34 ページ 2019年4月16日 火曜日 午後7時58分

Safety information for customers in the EU

English

Declaration of Conformity (DoC)

Hereby, “

Panasonic Corporation

” declares that this product is in compliance with the essential requirements and other relevant provisions of Directive 2014/53/EU.

Customers can download a copy of the original DoC to our RE products from our DoC server: http://www.ptc.panasonic.eu

Contact to Authorised Representative:

Panasonic Marketing Europe GmbH, Panasonic Testing Centre,

Winsbergring 15, 22525 Hamburg, Germany

5.15 - 5.35 GHz band is restricted to indoor operations only in the following countries.

Português

Declaração de Conformidade (DoC)

Com o presente documento, a “ Panasonic Corporation ” declara que este produto se encontra em conformidade com os requisitos específicos e demais especificações referentes à Diretiva 2014/53/UE.

Os clientes podem baixar uma cópia da declaração de conformidade (DoC) para nossos produtos RE do Server DoC: http://www.ptc.panasonic.eu

Contacto com um Representante Autorizado:

Panasonic Marketing Europe GmbH, Panasonic Testing Centre,

Winsbergring 15, 22525 Hamburg, Alemanha

A banda 5,15 - 5,35 GHz está restrita a operações no interior, apenas nos seguintes países.

Type of wireless

WLAN

(The main unit)

Bluetooth ®

(The main unit)

2.4 GHz Wireless

System

(The main unit and the active subwoofer)

Frequency band

2412-2472 MHz

5180-5320 MHz

5500-5700 MHz

2402-2480 MHz

2401.35-

2479.35 MHz

Maximum power

(dBm e.i.r.p.)

20 dBm

20 dBm

20 dBm

10 dBm

10 dBm

Ελληνικά

Δήλωση συμμόρφωσης (DoC)

Η “ Panasonic Corporation ” δηλώνει ότι το προϊόν αυτό είναι

συμμορφωμένο προς τις βασικές απαιτήσεις και άλλες σχετικές

διατάξεις της Οδηγίας 2014/53/EΕ.

Οι πελάτες μπορούν να κατεβάσουν ένα αντίγραφο του πρωτοτύπου

DoC για τα RE προϊόντα μας από τον DoC server μας: http://www.ptc.panasonic.eu

Επικοινωνήστε με τον Εξουσιοδοτημένο Αντιπροσωπό μας:

Panasonic Marketing Europe GmbH, Panasonic Testing Centre,

Winsbergring 15, 22525 Hamburg, Γερμανία

Η ζώνη των 5,15 - 5,35 GHz περιορίζεται σε λειτουργίες σε

εσωτερικούς χώρους μόνο στις ακόλουθες χώρες.

Tipo de ligação sem fios

Banda de frequência

WLAN

(The main unit)

2412-2472 MHz

5180-5320 MHz

5500-5700 MHz

Bluetooth ®

(The main unit)

2.4 GHz Wireless

System

(The main unit and the active subwoofer)

2402-2480 MHz

2401.35-

2479.35 MHz

Potência máxima

(dBm e.i.r.p.)

20 dBm

20 dBm

20 dBm

10 dBm

10 dBm

Magyar

Megfelelőségi Nyilatkozat (DoC)

Ezennel a, “

Panasonic Corporation

” kijelenti, hogy a jelen termék kielégíti az 2014/53/EU Irányelv létfontosságú követelményeit és más vonatkozó rendelkezéseit.

A vásárlók letölthetik az RE termékek eredeti DoC másolatát a

DoC szerverünkről: http://www.ptc.panasonic.eu

A hivatalos képviselő elérhetősége:

Panasonic Marketing Europe GmbH, Panasonic Testing Centre,

Winsbergring 15, 22525 Hamburg, Németország

A 5,15 - 5,35 GHz sávtartományt csak az alábbi országok korlátozzák beltéri használatra.

Τύπο ασύρµατης Ζώνη συχνοτήτων

WLAN

(The main unit)

2412-2472 MHz

5180-5320 MHz

5500-5700 MHz

2402-2480 MHz

Bluetooth ®

(The main unit)

2.4 GHz Wireless

System

(The main unit and the active subwoofer)

2401.35-

2479.35 MHz

Μέγιστη ισχύς

(dBm e.i.r.p.)

20 dBm

20 dBm

20 dBm

10 dBm

10 dBm

Wireless típus

WLAN

(The main unit)

Bluetooth ®

(The main unit)

2.4 GHz Wireless

System

(The main unit and the active subwoofer)

Frekvenciasáv

2412-2472 MHz

5180-5320 MHz

5500-5700 MHz

2402-2480 MHz

2401.35-

2479.35 MHz

Maximális teljesítmény

(dBm e.i.r.p.)

20 dBm

20 dBm

20 dBm

10 dBm

10 dBm

34 TQBM0479

SC-HTB900-EGEBGN-TQBM0479_eng.book 35 ページ 2019年4月16日 火曜日 午後7時58分

Slovensky

Vyhlásenie o zhode (DoC)

Panasonic Corporation

” týmto vyhlasuje, že tento výrobok je v súlade so základnými požiadavkami a ďalšími príslušnými ustanoveniami smernice 2014/53/EÚ.

Zákazníci si môžu stiahnuť kópiu pôvodného DoC na naše RE výrobky z nášho servera DoC: http://www.ptc.panasonic.eu

Kontakt na splnomocneného zástupcu:

Panasonic Marketing Europe GmbH, Panasonic Testing Centre,

Winsbergring 15, 22525 Hamburg, Nemecko

Pásmo 5,15 - 5,35 GHz je obmedzené na prevádzku vo vnútri iba v nasledovných krajinách.

Latviski

Atbilstības deklarācija (DoC)

Ar šo “Panasonic Corporation” paziņo, ka šis izstrādājums atbilst pamatprasībām un pārējiem Direktīvas 2014/53/ES noteikumiem.

Pircēji var lejupielādēt oriģinālo DoC kopiju mūsu RE izstrādājumos no mūsu DoC servera: http://www.ptc.panasonic.eu

Lūdzam sazināties ar pilnvaroto parstāvi:

Panasonic Marketing Europe GmbH, Panasonic Testing

Centre, Winsbergring 15, 22525 Hamburg, Vācijā

5,15–5,35 GHz frekvenču joslā lieto tikai telpās šādās valstīs.

Typ bezdrôtového pripojenia

WLAN

(The main unit)

Bluetooth ®

(The main unit)

2.4 GHz Wireless

System

(The main unit and the active subwoofer)

Frekvenčné pásmo

2412-2472 MHz

5180-5320 MHz

5500-5700 MHz

2402-2480 MHz

2401.35-

2479.35 MHz

Maximálny výkon

(dBm e.i.r.p.)

20 dBm

20 dBm

20 dBm

10 dBm

10 dBm

Eesti keel

Vastavusdeklaratsioon (DoC)

Käesolevaga kinnitab “ Panasonic Corporation ”, et see toode vastab direktiivi 2014/53/EL olulistele nõuetele ja teistele asjakohastele sätetele.

Kliendid saavad koopia meie RE toodetele kehtiva originaalvastavusdeklaratsiooni koopia alla laadida meie DoC-serverist: http://www.ptc.panasonic.eu

Võtke ühendust volitatud esindajaga:

Panasonic Marketing Europe GmbH, Panasonic Testing Centre,

Winsbergring 15, 22525 Hamburg, Saksamaa

5,15 - 5,35 GHz riba on mõeldud kasutamiseks ainult siseruumides järgmistes riikides.

Bezvadu tips

WLAN

(The main unit)

Bluetooth ®

(The main unit)

2.4 GHz Wireless

System

(The main unit and the active subwoofer)

Frekvenču josla

2412-2472 MHz

5180-5320 MHz

5500-5700 MHz

2402-2480 MHz

2401.35-

2479.35 MHz

Maksimālā jauda

(dBm EIRP)

20 dBm

20 dBm

20 dBm

10 dBm

10 dBm

Lietuviškai

Atitikties deklaracija (AD)

Bendrovė “ Panasonic Corporation ” patvirtina, kad šis gaminys atitinka direktyvos 2014/53/ES esminius reikalavimus ir kitas taikytinas nuostatas.

Mūsų RE gaminių originalios atitikties deklaracijos kopiją klientai gali atsisiųsti iš mūsų AD serverio: http://www.ptc.panasonic.eu

Įgaliotojo atstovo adresas:

Panasonic Marketing Europe GmbH, Panasonic Testing Centre,

Winsbergring 15, 22525 Hamburg, Vokietija.

Kai veikimo dažnis yra nuo 5,15 iki 5,35 GHz, šį gaminį galima naudoti tik patalpose toliau išvardytose šalyse.

Juhtmevaba seadme tüüp

WLAN

(The main unit)

Bluetooth ®

(The main unit)

2.4 GHz Wireless

System

(The main unit and the active subwoofer)

Sagedusriba

2412-2472 MHz

5180-5320 MHz

5500-5700 MHz

2402-2480 MHz

2401.35-

2479.35 MHz

Maksimaalne võimsus

(dBm EIRP)

20 dBm

20 dBm

20 dBm

10 dBm

10 dBm

Bevielio ryšio tinklas

WLAN

(The main unit)

Bluetooth ®

(The main unit)

2.4 GHz Wireless

System

(The main unit and the active subwoofer)

Dažnių diapazonas

2412-2472 MHz

5180-5320 MHz

5500-5700 MHz

2402-2480 MHz

2401.35-

2479.35 MHz

Maksimali siuntimo galia

(dBm e.i.r.p.)

20 dBm

20 dBm

20 dBm

10 dBm

10 dBm

TQBM0479 35

SC-HTB900-EGEBGN-TQBM0479_eng.book 36 ページ 2019年4月16日 火曜日 午後7時58分

Slovensko

Izjava o skladnosti (DoC)

“ Panasonic Corporation ” v tem dokumentu izjavlja, da je izdelek v skladu z bistvenimi zahtevami in drugimi pomembnimi določbami Direktive 2014/53/EU.

Stranka lahko naloži izvod izvirnega DoC o naših izdelkih RE s strežnika DoC: http://www.ptc.panasonic.eu

Naslov pooblaščenega predstavnika:

Panasonic Marketing Europe GmbH, Panasonic Testing Centre,

Winsbergring 15, 22525 Hamburg, Nemčija

Frekvenčni pas 5,15–5,35 GHz je v naslednjih državah omejen samo na uporabo v zaprtih prostorih.

Български

Декларация за съответствие (DoC)

С настоящото “ Panasonic Corporation ” декларира, че този продукт е в съответствие с основните изисквания и други съответни разпоредби на Директива 2014/53/EС.

Потребителите могат да свалят копие от оригиналните DoC към нашите продуктите от типа RE от сървъра, на който се съхраняват DoC: http://www.ptc.panasonic.eu

Свържете се с нашия упълномощен представител:

Panasonic Marketing Europe GmbH, Panasonic Testing Centre,

Winsbergring 15, 22525 Hamburg, Германия

Честотната лента 5,15 - 5,35 GHz е ограничена за експлоатация на закрито единствено в следните държави.

Vrsta brezžične povezave

WLAN

(The main unit)

Bluetooth ®

(The main unit)

2.4 GHz Wireless

System

(The main unit and the active subwoofer)

Frekvenčni pas

2412-2472 MHz

5180-5320 MHz

5500-5700 MHz

2402-2480 MHz

2401.35-

2479.35 MHz

Največja moč

(dBm EIRP)

20 dBm

20 dBm

20 dBm

10 dBm

10 dBm

Norsk

Samsvarserklæring (DoC)

“ Panasonic Corporation ” erklærer herved at dette produktet samsvarer med de grunnleggende kravene og andre relevante bestemmelser i direktivet 2014/53/EU.

Kundene kan laste ned en kopi av den originale samsvarserklæringen (DoC) for vårt RE utstyr fra vår DoC server: http://www.ptc.panasonic.eu

Kontaktinformasjon autorisert representant:

Panasonic Marketing Europe GmbH, Panasonic Testing Centre,

Winsbergring 15, 22525 Hamburg, Tyskland

5,15 – 5,35 GHz-båndet er begrenset til innendørs bruk i de følgende landene.

Вид безжична връзка

WLAN

(The main unit)

Bluetooth ®

(The main unit)

2.4 GHz Wireless

System

(The main unit and the active subwoofer)

Честотна лента

2412-2472 MHz

5180-5320 MHz

5500-5700 MHz

2402-2480 MHz

2401.35-

2479.35 MHz

Максимална мощност

(dBm e.i.r.p.)

20 dBm

20 dBm

20 dBm

10 dBm

10 dBm

Român

Declaraţie de Conformitate (DoC)

“ Panasonic Corporation ” declară prin prezenta că acest produs este conform cu cerinţele esenţiale şi alte prevederi relevante ale Directivei 2014/53/UE.

Clienţii pot descărca o copie a DoC-ului original al produselor noastre RE de la adressa noastră DoC din Internet: http://www.ptc.panasonic.eu

Contactaţi Reprezentantul Autorizat:

Panasonic Marketing Europe GmbH, Panasonic Testing Centre,

Winsbergring 15, 22525 Hamburg, Germania

Intervalul 5,15 - 5,35 GHz este restricţionat la operarea în interior doar în următoarele ţări.

Type trådløs

WLAN

(The main unit)

Bluetooth ®

(The main unit)

2.4 GHz Wireless

System

(The main unit and the active subwoofer)

Frekvensbånd

2412-2472 MHz

5180-5320 MHz

5500-5700 MHz

2402-2480 MHz

2401.35-

2479.35 MHz

Maks. effekt

(dBm e.i.r.p.)

20 dBm

20 dBm

20 dBm

10 dBm

10 dBm

Tip de wireless Interval de frecvenţă

WLAN

(The main unit)

Bluetooth ®

(The main unit)

2.4 GHz Wireless

System

(The main unit and the active subwoofer)

2412-2472 MHz

5180-5320 MHz

5500-5700 MHz

2402-2480 MHz

2401.35-

2479.35 MHz

Putere maximă

(dBm e.i.r.p.)

20 dBm

20 dBm

20 dBm

10 dBm

10 dBm

36 TQBM0479

SC-HTB900-EGEBGN-TQBM0479_eng.book 37 ページ 2019年4月16日 火曜日 午後7時58分

Hrvatski

Deklaracija o podobnosti (DoC)

Ovime „ Panasonic Corporation ” izjavljuje da ovaj proizvod udovoljava osnovnim zahtjevima i ostalim relevantnim odredbama Direktive 2014/53/EU.

Kupci mogu preuzeti kopiju originalne DoC za naše RE proizvode s našeg DoC poslužitelja: http://www.ptc.panasonic.eu

Adresa ovlaštenog predstavništva:

Panasonic Marketing Europe GmbH, Panasonic Testing Centre,

Winsbergring 15, 22525 Hamburg, Njemačka

Pojas od 5,15 do 5,35 GHz ograničen je na upotrebu samo u zatvorenim prostorima u sljedećim državama.

Türkçe

Uygunluk Beyanı (DoC)

“ Panasonic Corporation ” bu belge ile bu ürünün 2014/53/EU Direkti’nin temel gerekliliklerine ve diğer ilgili hükümlerine uygun olduğunu beyan eder.

Müşterilerimiz RE ürünlerimizle ilgili orijinal DoC belgesinin bir kopyasını DoC sunucumuzdan indirebilir: http://www.ptc.panasonic.eu

Yetkili Temsilci ile temasa geçin:

Panasonic Marketing Europe GmbH, Panasonic Testing Centre,

Winsbergring 15, 22525 Hamburg, Almanya

5,15 - 5,35 GHz bant sadece aşağıdaki ülkelerde kapalı mekanlardaki işlemlerle sınırlıdır.

Vrsta bežične mreže

WLAN

(The main unit)

Bluetooth ®

(The main unit)

2.4 GHz Wireless

System

(The main unit and the active subwoofer)

Frekvencijski pojas

2412-2472 MHz

5180-5320 MHz

5500-5700 MHz

2402-2480 MHz

2401.35-

2479.35 MHz

Maksimalna snaga

(dBm e.i.r.p.)

20 dBm

20 dBm

20 dBm

10 dBm

10 dBm

Kablosuz türü

WLAN

(The main unit)

Bluetooth ®

(The main unit)

2.4 GHz Wireless

System

(The main unit and the active subwoofer)

Frekans bandı

2412-2472 MHz

5180-5320 MHz

5500-5700 MHz

2402-2480 MHz

2401.35-

2479.35 MHz

Maksimum güç

(dBm e.i.r.p.)

20 dBm

20 dBm

20 dBm

10 dBm

10 dBm

This product incorporates the following software:

(1)the software developed independently by or for Panasonic Corporation,

(2)the software owned by third party and licensed to Panasonic Corporation,

(3)the software licensed under the GNU General Public License, Version 2.0 (GPL V2.0),

(4)the software licensed under the GNU LESSER General Public License, Version 2.1 (LGPL V2.1), and/or

(5)open source software other than the software licensed under the GPL V2.0 and/or LGPL V2.1.

The software categorized as (3) - (5) are distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY, without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.

Please refer to the detailed terms and conditions thereof shown in our website below.

http://panasonic.jp/support/global/cs/audio/oss/all8_3_1c.html

At least three (3) years from delivery of this product, Panasonic will give to any third party who contacts us at the contact information provided below, for a charge no more than our cost of physically performing source code distribution, a complete machine-readable copy of the corresponding source code covered under GPL V2.0, LGPL V2.1 or the other licenses with the obligation to do so, as well as the respective copyright notice thereof.

Contact Information: [email protected]

The source code and the copyright notice are also available for free in our website below.

https://panasonic.net/cns/oss/

Safety information for customers in Norway

NORSK

ADVARSEL

Produkt

≥ For å redusere faren for brann, elektrisk støt eller skade på apparatet:

– Utsett ikke produktet for regn, fukt, drypping eller sprut.

– Ikke plasser objekter som er fylt med væske, som vaser, på apparatet.

– Bruk det anbefalte tilbehøret.

– Fjern ikke deksler.

– Reparer ikke denne enheten selv, overlat service til kvalifisert servicepersonell.

Vekselstrømnett

≥ Nettstøpselet er trukket ut fra denne enheten.

Installer denne enheten slik at nettstøpselet umiddelbart kan trekkes fra stikkontakten.

FORSIKTIG

Produkt

≥ Plasser ikke åpen ild, slik som levende lys, oppå apparatet.

≥ Dette apparatet er beregnet for bruk under moderate klimaforhold.

Plassering

≥ For å redusere faren for brann, elektrisk støt eller skade på apparatet:

– Ikke plasser apparatet i en bokhylle, et innebygget kabinett eller et annet lukket sted. Pass på at produktet er godt ventilert.

– Apparatets ventilasjonsåpninger må ikke dekkes til med aviser, duker, gardiner eller lignende.

TQBM0479 37

SC-HTB900-EGEBGN-TQBM0479_eng.book 38 ページ 2019年4月16日 火曜日 午後7時58分

[For_Australia]

Panasonic Warranty

1. Subject to the condions of this warranty Panasonic or its Authorised Service Centre will perform necessary service on the product, without charge for parts or labour, if in the opinion of Panasonic the product is found to have a manufacturing defect within one

(1) year or (12 months) (the “warranty period”) from the date of purchase appearing on your purchase receipt.

3.

Dealers, and only where the products are used and serviced within Australia or its territories. Warranty cover only applies to the services that are carried out by a Panasonic Authorised Service Centre and only if valid proof of purchase is presented when the warranty service is requested.

This warranty only applies if the product has been installed and/or used in accordance with the manufacturer’s recommendaons (as noted in the operang instrucons) under normal use and reasonable care (in the opinion of Panasonic). The warranty does not cover damage, malfuncon or failure resulng from use of incorrect voltages, incorrect installaon, accident, misuse, neglect, build-up of dirt or dust, abuse, maladjustment of customer controls, mains supply problems, thunderstorm acvity, infestaon by insects or vermin, tampering or repair by unauthorised persons (including unauthorised alteraons), exposure to abnormally corrosive condions, or any foreign object or maer having entered the product.

4. This warranty does not cover the following items unless the fault or defect existed at the me of purchase:

(a) Consumable parts

(b) Cosmec parts

(c) Worn or damaged parts

(d) Informaon stored on Hard Disk Drives, Opcal Discs, USB Devices, SD Cards, Tapes

(e) DTV recepon issues caused by TV Aerial / Cabling / Wall socket(s)

5. Some products may be supplied with Ethernet connecon hardware. The warranty is limited on such products and will not cover:

(a) Internet and or DLNA connecon / setup related problems

(b) Access fees and or charges incurred for internet connecon

(c) Incompable soware or soware not specifically spulated in the product operaons manual; and

(d) Any indirect or consequenal costs associated with the incorrect use or misuse of the hardware, its connecon to the internet or any

other device.

6. To claim warranty service, when required, you should:

• Contact Panasonic’s Customer Care Centre on 132 600 for Service Centre informaon.

• Confirm the opening and acceptance mes with the Authorised Service centre that you choose.

• Then send or take the product to a Panasonic Authorised Service Centre together with your proof of purchase receipt.

• Any freight and insurance costs associated with the transport of the product to and/or from your nearest Authorised Service Centre must

be arranged and paid for by you.

7.

The warranes hereby conferred do not extend to, and exclude, any costs associated with the installaon, de-installaon or re-installaon of a product, including costs related to the mounng, de-mounng or remounng of any screen, (and any other ancillary acvies), delivery, handling, freighng, transportaon or insurance of the product or any part thereof or replacement of and do not extend to, and exclude, any damage or loss occurring by reason of, during, associated with, or related to such installaon, de-installaon, re-installaon or transit.

Panasonic Authorised Service Centres are located in major metropolitan areas and most regional centres of Australia, however, coverage will vary dependant on product. For advice on exact Authorised Service Centre locaons for your product, please telephone our Customer Care

Centre on 132600 or visit our website and use the Service Centre Locator.

In addion to your rights under this warranty, Panasonic products come with consumer guarantees that cannot be excluded under the

Australian Consumer Law. If there is a major failure with the product, you can reject the product and elect to have a refund or to have the product replaced or if you wish you may elect to keep the goods and be compensated for the drop in value of the goods. You are also entled to have the product repaired or replaced if the product fails to be of acceptable quality and the failure does not amount to a major failure.

If there is a major failure in regard to the product which cannot be remedied then you must nofy us within a reasonable period by contacng the Panasonic Customer Care Centre. If the failure in the product is not a major failure then Panasonic may choose to repair or replace the product and will do so in a reasonable period of me from receiving noce from you.

THIS WARRANTY CARD AND THE PURCHASE DOCKET (OR SIMILAR PROOF OF PURCHASE)

SHOULD BE RETAINED BY THE CUSTOMER AT ALL TIMES

If you require assistance regarding warranty condions or any other enquiries, please visit the Panasonic

Australia website

www.panasonic.com.au

or contact by phone on

132 600

If phoning in, please ensure you have your operang instrucons available.

Panasonic Australia Pty. Limited

ACN 001 592 187 ABN 83 001 592 187

1 Innovation Road, Macquarie Park NSW 2113 www.panasonic.com.au

PRO-031-F11 Issue: 5.0 23-01-2018

38 TQBM0479

SC-HTB900-EGEBGN-TQBM0479_eng.book 39 ページ 2019年4月16日 火曜日 午後7時58分

TQBM0479 39

SC-HTB900-EGEBGN-TQBM0479_eng.book 41 ページ 2019年4月16日 火曜日 午後7時58分

For the United Kingdom and Ireland customers

Sales and Support Information

Customer Communications Centre

≥ For customers within the UK: 0344 844 3899

≥ For customers within Ireland: 01 289 8333

≥ Monday–Friday 9:00 am – 5:00 pm (Excluding public holidays).

≥ For further support on your product, please visit our website: www.panasonic.co.uk

Direct Sales at Panasonic UK

≥ Order accessory and consumable items for your product with ease and confidence by phoning our

Customer Communications Centre Monday–Friday 9:00 am – 5:00 pm (Excluding public holidays).

≥ Or go on line through our Internet Accessory ordering application at www.pas-europe.com.

≥ Most major credit and debit cards accepted.

≥ All enquiries transactions and distribution facilities are provided directly by Panasonic UK.

≥ It couldn’t be simpler!

≥ Also available through our Internet is direct shopping for a wide range of finished products. Take a browse on our website for further details.

EU

Manufactured by:

Importer for Europe:

Panasonic Corporation

Kadoma, Osaka, Japan

Panasonic Marketing Europe GmbH

Panasonic Testing Centre

Winsbergring 15, 22525 Hamburg, Germany

Panasonic Corporation

Web Site: http://www.panasonic.com

© Panasonic Corporation 2019

TQBM0479

F0419HA0

advertisement

Was this manual useful for you? Yes No
Thank you for your participation!

* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project

Related manuals

Download PDF

advertisement