Waterworks MIBT70 Minna 60" x 30" x 20" Rectangular Cast Iron Bathtub Installation Guide

Minna Bathtub

WWBT70

Dorset

®

Bathtub

4. Install the proper waste and overflow (sold separately).

5. Fill the tub with water to the point where water enters the overflow opening. Drain the tub while inspecting all connections above and below the flooring for leaks.

6. Cover the bathtub surface with a bathtub liner or other form of protection until construction is completed.

WARNING:

The following basic safety precautions should always be followed when using your bathtub.

➢

Caution should always be exercised when entering or leaving the bathtub.

➢

DANGER: To reduce the risk of injury, do not permit children or persons with a disability to use the bathtub without close supervision.

➢

Keep all electrical appliances such as radios and hairdryers a safe distance from the bathtub.

➢

Do not use the bathtub when sleepy or drowsy, under the influence of alcohol or prescription medications or when overheated.

➢

If further assistance is required, please contact Product

Support at 1-800-927-2120 (8am-7pm EST)

Installation Guidelines

These guidelines have been prepared for the professional contractor to aid in the installation of:

DORSET BATHTUB (WWBT60)

3/0 8

2

All dimensions are based on original specifications and are subject to change and variation.

Please consult your Design Associate for current specifications.

W A T E R W O R K S ®