WEST 1600 Manual
WEST 1600 is a reliable manure spreader that can handle various materials, including yard manure, silage, and slurry. It features a sliding door for controlled spreading, a stone trap to prevent damage, and a variable feed-out mechanism to eliminate bridging. The robust build and efficient spreading system make it ideal for agricultural use.
Advertisement
Advertisement
A-PDF Merger DEMO : Purchase from www.A-PDF.com to remove the watermark
INDEX
1. Machinery Specifications
2. Safety Procedures
3. Maintenance
4. Operating Instructions
5. Tyre Pressures, Bolt Torque’s
6. Anti-Splash Attachments
7. Front Drive Assembly Illustration
8. Front Drive Assembly List
9. Auger Assembly Illustration
10. Auger Assembly List
11. Feed Out Rotor Assembly Illustration
12. Feed Out Rotor Assembly List
13. Cam Arm & Moving Wall Assembly Illustration
14. Cam Arm & Moving Wall Assembly List
15. Rotor Cover & Tray Assembly Illustration
16. Rotor Cover & Tray Assembly List
17. Rear Plate & Bearing Assembly Illustration
18. Rear Plate & Bearing Assembly List
19. Door, Door Cylinder & Door Track Assembly Illustration
20. Door, Door Cylinder & Door Track Assembly List
21. Door Cylinder Assembly Illustration
22. Door Cylinder Assembly List
23. Tray Tensioned Lever Assembly Illustration
24. Tray Tensioned Lever Assembly List
25. Door Indicator Assembly Illustration
26. Door Indicator Assembly List
27. Hydraulics Layout Illustration
28. Hydraulics List
29. 1300, 1600 & 2000 Lights Illustration
30. 1300,1600 & 2000 Lights List
31. 3000 Lights Illustration
32. 3000 Lights List
33. 1300/1600 Axle Assembly Illustration
34. 1300/1600 Axle Assembly List
35. 2000 Axle Assembly Illustration
36. 2000 Axle Assembly List
37. PTO Drive Shaft Illustration
For Harry West (Prees) Ltd. use only.
3000 XX570002 onwards
2000 XX20236 onwards
1600 XX161252 onwards
1300 XX13518 onwards
SPECIFICATION – METRIC
Tyre Size
Tyre Size
Tyre Pressure – bars
Overall Height – metres
Overall Width
Overall Length
Level Volume – Litres
Unladen Weight – tonnes
Gross Weight – tonnes
P.T.O. Speed – r.p.m
Min. Tractor – h.p.
Axle Beam – mm.sq.
Auger Dia – metres
Auger Speed – r.p.m
Feed Out Rota Dia. – metres
Feed Out Rotor – r.p.m
Hydraulic Pressure
18.4 x 26 x 12 ply
2.6
2.12
2.42
4.70
5910
3.04
23.1 x 26 x 14 ply
2.3
2.22
2.64
5.49
7274
3.40
8.933
540
70
90
0.74
10.8
0.63
508
10.653
540
80
90
0.74
10.8
0.63
508
170 bars max
SPECIFICATION – IMPERIAL
MODEL
1300
MODEL
1600
Tyre Pressure – p.s.i
Overall height
Overall width
Overall Length
Level Volume – Gallons
P.T.O. Speed – r.p.m
Min. Tractor – kw
Axle Beam – sq. in.
Auger Dia – ins
Auger Speed – r.p.m.
Feed Out Rotor Dia – ins
Feed Out Rotor – r.p.m
Hydraulic Pressure
MODEL
1300
MODEL
1600
18.4 x 26 x 12 ply
38
6'11"
7'11"
15'5"
1300
540
52
3-5"
29"
10.8
2’10”
508
2500 lb/in²
23.1 x 26 x 14 ply
34
7'3"
8'8"
18'0"
1600
540
60
3-5"
29"
10.8
2’10”
508
MODEL
2000
23.1 x 26 x 16 ply
2.6
2.35
2.64
5.66
9092
3.84
12.905
540
80
100
0.74
11.2
0.63
508
MODEL
2000
23.1 x 26 x 16 ply
38
7'9"
8'8"
18'7"
2000
540
67
4"
29"
11.2
2’10”
508
MODEL
3000
650/65-30.5 x 16 ply
2.2
2.85
2.9
6.34
13638
4.96
18.558
540
110
100
0.74
11.2
0.614
508
MODEL
3000
650/65-30.5 x 16 ply
32
9’4”
9’6”
20’9”
3000
540
82
4”
29”
11.2
2’
508
1
SAFE STOP PROCEDURE
• Make sure handbrake is fully applied.
• Make sure all controls and equipment is left safe.
• Stop the engine.
• Remove the key.
Always use SAFE STOP:
• Before leaving your seat; or
• When anyone else approaches; or
• When anyone else is working on the machine.
You need to take extra precautions when safe stop is not possible.
SAFETY
1.
Keep all personnel clear of machine when spreading or manoeuvring
2.
Do not permit anyone to ride on machine.
3.
Never enter machine to clear blockages unless the SAFE STOP PROCEDURE has been followed and P.T.O. drive shaft disconnected at the tractor end before carrying out adjustments, inspections or service.
4.
Always disconnect the P.T.O drive shaft at the tractor end before carrying out adjustments, inspections or service.
5.
In use keep all guards in place, they are for your protection and ensure that the P.T.O shaft guard chains are secure.
6.
P.T.O Drive Shaft – check there is a minimum overlap of 150mm of the lemon section tubes and that these tubes do not bottom on full lock. Should the tubes need shortening cut equal amounts from each tube and the plastic guard tubes.
7.
Check tractor is large enough to control the machine in all conditions, do not overload the spreader.
8.
Check hydraulic circuits functioning, especially the brakes. Hoses need to be checked periodically for excessive cracking or damage that may compromise their functionality. Always ensure SAFE STOP PROCEDURE is in place.
9.
Foreign bodies in manure – the machine can throw stones or other objects a great distance. Ensure the machine is kept well clear of people, roads and buildings.
10.
Rotor tips and channels – check for wear and damage. Replace as necessary.
11.
Disengage P.T.O clutch when turning sharp corners.
12.
Operation of lights must be checked periodically.
13.
The driver must not exceed 20mph while towing this machine.
14.
Care must be taken when traversing across any land with an incline of greater than 5 degrees, as there is a danger of the vehicle overturning.
15.
Tyre pressure must be maintained for safe use of machinery.
2
MAINTENANCE
• P.T.O. Shaft
Every 8 operating hours lubricate with quality grease. Clean and grease the P.T.O drive shaft before each prolonged period of non-use. Grease the plastic guard tubes in winter to prevent freezing. Note! `Safe Stop’ and disengage PTO.
• Feed out Rotor, PTO drive and Layshaft Bearings
Every 8 operating hours lubricate with Morris Multi Purpose EP Grease or equivalent. Note! `Safe Stop’ and disengage PTO.
• Check tyre pressures and wheel nuts every 8 operating hours. Note! `Safe Stop’ and disengage PTO.
• Main Auger Bearings
Every 8 operating hours lubricate with Morris Multi Purpose EP Grease or equivalent. Note! `Safe Stop’ and disengage PTO.
• Tray Tension Bushes (under Rotor Lever)
Every 20 operating hours lubricate with Morris Multi Purpose EP Grease or equivalent. Note! `Safe Stop’ and disengage PTO.
• Recommended slackness in chains should be measured as illustrated, with a measurement of 6mm – 12mm.
To obtain a full life for each chain, regular tensioning is required.
Note! `Safe Stop’ and disengage PTO.
• lubricate with Oil every 200 hours
(a) Drive chains, and check adjustment, Note! `Safe Stop’ and disengage PTO.
(b) Guard hinges, stone trap pivots, tray pivots, rotor cover hinges, moving wall pivot, and door cylinder and brake cylinder pivot points. Note! `Safe Stop’ and disengage PTO.
• Annually remove hub caps from axles and fill with Morris Multi Purpose EP Grease or equivalent, lightly oil brake lever shaft. Note! `Safe Stop’ and disengage PTO.
• Hoses must be checked periodically for excessive cracking or damage that may compromise their functionality. Any maintenance on the hydraulics must not be carried out unless the vehicle is isolated appropriately.
• Operation of the lights must be checked periodically.
• When replacing the bearings in axle hubs, they must be torqued up until they start to drag, then released to the nearest slot on the castle nut.
Note: - R.H.P. type bearings should only be greased with 1or 2 pumps of grease gun. Excessive greasing will force out the seals.
If machine is laid up for a period of time, carry out greasing and lubrication
. i.e. pour waste oil between body and moving wall to combat corrosion.
3
OPERATING INSTRUCTIONS
1.
Couple tractor/dual spreader on ring hitch.
* Fit P.T.O. shaft with shear coupling at machine end. Check shear bolt is 12.9 grade.
Should P.T.O shaft be too long, refer to manufacturers instruction leaflet for shortening.
2.
The sliding door is operated with a double acting hydraulic cylinder and a 2-way valve is required on the tractor. The brakes are operated simultaneously with the tractor brakes. Before operating the machine check these two services are operational.
3.
Check maintenance for any loose bolts or parts before starting machine. Note! `Safe Stop’ and disengage PTO.
4.
The P.T.O. shaft is normally shipped inside the body of the machine behind the stone trap door.
5.
The tray tension mechanism is in its working position when the handle is fully raised. In its lowered position the tray is dropped and the rotor door (over the rotor) may be raised to clear blockages. Never use the machine with the handle in the lowered position.
Loading Manure
Close sliding door fully. For yard manure, which does not easily break up, it is recommended that it be broken up with the loader before being loaded into machine. Spreading will be consistent and fast, providing the above is complied with.
Loading Silage
Fill to only two-thirds full and level from front to back. Fully close sliding door when starting. Feed out at low r.p.m.
Spreading Manure
Open sliding door a minimum of halfway. Engage P.T.O at low tractor engine revs and immediately increase revs to 540 at the
P.T.O. Drive tractor forward at required speed and adjust sliding door position to give required spread.
Spreading Slurry
Again engage P.T.O at low tractor engine revs, increase to 540rpm and open sliding door 2" to 3 " depending on the consistency of the slurry and the application rate required.
General
Should the machine have variable feed out, operate the sliding door which will eliminate any bridging and return door to previous opening, but never close sliding door while the machine is running. Excessive noises should be investigated and any stones or foreign bodies removed from inside the stone trap or underfeed out rotor.
Note! `Safe Stop’ and disengage PTO.
Do not permit string or black plastic to get wound around the auger or feed out rotor shafts, remove this regularly as it can impose high loads on the bearings and increase the power required to drive the machine. Note! `Safe Stop’ and disengage PTO.
Shear bolts
Shear bolts are located in the PTO drive shaft. Spare shear bolts are fitted at the bottom of the front guard.
In the event of shear bolt breakage, normally caused through stones or other objects, Note! `Safe Stop’ disconnect P.T.O shaft and replace shear pin. Unlock stone trap door and clear any stones. Drop tray under rotor and check for obstruction.
Tray under Rotor
Any build up of manure on the rotor tray should be removed. Note! `Safe Stop’ and disengage PTO . The tray is spring loaded and adjustable. The correct gap between the rotor tips and the tray is 3 to 4 mm (1/8"). Note when the tray is dropped there should be no gap between the coils of the springs. Gaps indicate that the springs are too weak and an irregular spread pattern will result.
Auger Spring Plates
Four spring plates are fitted to the front of the auger, these plates extend to the full diameter of the auger. These plates transfer manure sideways into the feed out rotor and should they become damaged or bent, must be replaced or an irregular spread will result. Before attempting to replace plates Note! `Safe Stop’ and disengage PTO.
Agitator
A flat agitator plate is fitted to the R.H. sidewall of the body, this plate is moved up and down by a connecting rod and cam at the front of the auger. This plate feeds manure down to the auger and prevents bridging. It is possible for this plate to freeze to the body wall and this should be freed off prior to use. Note! `Safe Stop’ and disengage PTO.
Stone Trap
Check stone trap regularly and remove stones, check for stones under auger and between auger and feed out rotor. Note! `Safe
Stop’ and disengage PTO.
Feed out Rotor Tips
Regularly check for wear and when necessary, hard weld to make up for wear and replace any damaged parts on rotor. Note!
`Safe Stop’ and disengage PTO.
4
Bolt Torque
M8
M8
M10
M12
M16
M20
M22 (wheel)
Tyre Pressures
Model Tyre Size
1300 18.4 x 26 x 12 ply
1600 23.1 x 26 x 14 ply
2.6
2.3
2000 23.1 x 26 x 16 ply 2.6
3000 650/65-30.5 x 16 ply 2.2
Bars
Data
Grade 12.9
Grade 8.8
Grade 8.8
Grade 8.8
Grade 8.8
Grade 8.8
Grade
Bolt Torques
Black Bolts
N/m.
46.4
28
56
98
244
476
370
P.S.I
38
33
38
32
Plated nuts
Kg/m
4.75
2.9
5.74
10.0
25.0
48.0
38
Lbs./ft
35
21
42
72
180
352
273
Wheels, Axles and Drawbar Torques
1300
1600
2000
3000
Wheel
360 N/m
360 N/m
360 N/m
360 N/m
Sprung Axle
-
-
-
-
Drawbar
-
-
-
-
5
DUAL ALL MODELS
REF. PART No. DESCRIPTION
131600 1300 & 1600 Splash Guard Assy
1 131104 Front & Rear Pressing 1300 & 1600
2 201602 Side Pressing LH
2 201605 Side Pressing RH
201600 2000 Splash Guard Assy
1 201601 Front & Rear Pressing 2000
2 201602 Side Pressing LH
2 201605 Side Pressing RH
571600 3000 Splash Guard Assy
1 571601 End Pressing
2 571610 Side Pressing
2 571620 Side Pressing
3 571630 Mid Pressing
132000 1 Decal Kit 1300
160400 1 Decal Kit 1600
202000 1 Decal Kit 2000
572000 1 Decal Kit 3000
2
2
2
2
2
2
2
QTY.
2
2
2
ANTI-SPLASH ATTACHMENT
AUGER DRIVE
SECONDARY DRIVE
PTO DRIVE
ROTOR DRIVE
7
TENSIONER
REF PART No. DESCRIPTION
1 990525 3 ” Circlip
2 110609 Key
3 110608 95 th duplex keyed Sprocket
4 200506 Thrust Washer
5 200504 Front auger bearing nylon bush
6 990502 Grease nipple
7
8 110607
Oilite bearing
(Inclusive with 110607)
10 th bushed duplex sprocket
9 120425 Chain adjuster pin
10 120287 Chain Tensioner Brkt
11 990524 2” Circlip
12 110605 76 th simplex keyed sprocket
13 110610 Key
14 990105 MP2 bearing
15 110611 Key
16 110606 12 th duplex keyed sprocket
17 120406 Spacer
18 120405 Lay Shaft
19 200510 Front Drive shaft
20 990107 MSF 1 bearing
21 120407 P.T.O. Box Spacer
22 200511 16 th
23 200512 12 th
simplex sprocket
splined sprocket
24 200929 P.T.O. box weld assy
25 110612 Key
26 990524 2” Circlip
27 200536 17 th Sprocket
FRONT DRIVE ASSEMBLY
2
1
1
1
1
1
1
1
1
1
1
1
1
1
2
1
1
1
1
1
QTY
1
2
1
1
1
1
2
45
46
41
42
43
44
37
38
39
40
33
34
35
36
REF PART No.
28
29
30
31
32
110604
200537
110603
200422
200400
200978
990114
200540
200541
200979
200801
200508
110434
200425
200976
200513
200131
200981
990542
990543
990544
990545
990546
990547
DESCRIPTION
Duplex chain
Simplex chain
Simplex chain
Front guard top
Front guard btm
Bolt M16 x 80
Washer
6006DDUCM Bearing (rhp)
12 th Idler Sprocket
Bush
Adjusting brkt
Front auger bearing weld assy
Felt seal
Spacer
P.T.O. Guard
Sealing Plate
Nylon Spacer
Adjuster
Tensioner Brkt weld assy
EXTRAS
1” P simplex half link
1” P simplex con/link
1” P simplex inner link
Duplex half link
1” P duplex con/link
1” P duplex inner link
1
1
1
1
1
1
1
1
2
1
1
1
QTY
1
1
1
1
1
1
1
6
7
7
3
4
5
6
REF PART NO
1
1
2
1
1
110300
160300
200300
570300
110315s
110311
110310
110313
110320
200320
110324
200324
1300/1600/2000/3000 AUGER ASSY
DESCRIPTION
Auger Assy 1300
Auger Assy 1600
Auger Assy 2000
Auger Assy 3000
Spring plate
1300/1600 Dual Auger plate8 mm
Auger plate 6 mm
1300/1600 Dual Filler plate
Front Shaft Assy (1300/1600)
Front Shaft Assy (2000/3000)
Rear Shaft Assy (1300/1600)
Rear Shaft Assy (2000/3000)
QTY
1
1
1
1
4
6/12/15/15
11/10/11/16
17/22/26/32
1
1
1
1
PLEASE STATE THE CORRECT MACHINE SERIAL NUMBER AND PART NUMBER WHEN ORDERING PARTS
REF PART NO
1
2
7
8
9
10
3
4
5
6
11
11a
11b
201000
201009
990112
200970
201007
201008
201001
201002
201022
201023
201010
201010
201010
DESCRIPTION
STANDARD ROTOR
FEED OUT ROTOR W/ASSY
SPACER
MSF2 BEARING
COVER PLATE
ROTOR TIP OUTER
ROTOR TIP INNER
FRONT & REAR CHANNEL
INTERMEDIATE CHANNEL
FRONT SHAFT W/ASSY
REAR SHAFT W/ASSY
SHIM 1mm
SHIM 2mm
SHIM 3mm
FEED OUT ROTOR ASSY
QTY
1
1
2
2
10
18
10
18
1
1
As Req
As Req
As Req
REF PART NO
1 201401
2
3
4
7
8
9
10
12
201009
990112
200970
201410
201420
201022
201023
201402
DESCRIPTION
3000 ROTOR
FEED OUT ROTOR W/ASSY
SPACER
MSF2 BEARING
COVER PLATE
FRONT CHANNEL W/A
COMMON CHANNEL W/A
FRONT SHAFT W/A
REAR SHAFT W/A
REPLACEABLE BLADE
PLEASE STATE THE CORRECT MACHINE SERIAL NUMBER AND PART NUMBER WHEN ORDERING PARTS
QTY
13
15
1
1
28
1
1
2
2
7
8
9
3
4
5
6
REF PART NO
1
2
200715
200701
110253
200924
990647
200918
200994
200927
Cam arm top
CAM ARM AND MOVING WALL
DESCRIPTION REF
Cam arm bottom
Moving wall assy 1300/1600
Guide Channel
Chamfered Bolt
2000 Moving wall assy
Retaining Washer
Pivot bush
M20 Nut and bolt
QTY
1
1
1
1
1
1
1
1
1
PART NO DESCRIPTION QTY
PLEASE STATE THE CORRECT MACHINE SERIAL NUMBER AND PART NUMBER WHEN ORDERING PARTS
REF PART NO
1 200946 Rotor Cover
2 200904 Tray
3 990515 Linch pin
4 200965 Link
5 200974 Spacer
DESCRIPTION
6 205117 Anti splash plate
(fitted from 07/2006)
ROTOR COVER AND TRAY
QTY REF PART NO
1
1
2
2
2
1
DESCRIPTION QTY
PLEASE STATE THE CORRECT MACHINE SERIAL NUMBER AND PART NUMBER WHEN ORDERING PARTS
REF PART NO
5
6
1
2
3
4
200977
200966
200509
200505
200804
200807
DESCRIPTION
SEAL PLATE
REAR PLATE ASSY
FELT SEAL
BEARING
BEARING HOUSING
COVER PLATE
REAR PLATE AND BEARING
QTY
1
1
1
2
1
1
REF PART NO DESCRIPTION
PLEASE STATE THE CORRECT MACHINE SERIAL NUMBER AND PART NUMBER WHEN ORDERING PARTS
QTY
2
3
4
5
6
7
200959
200961
200502
200971
200972
200956
DOOR TRACK TOP
1300/1600 CYLINDER BRKT
2000 CYLINDER PLUS EXTENSION PIECE
FRONT CYLINDER PIN
REAR CYLINDER PIN
SCRAPER PLATE
SLIDING DOOR CYLINDER AND TRACK
REF PART NO DESCRIPTION
1 200953 SLIDING DOOR ASSY
QTY REF PART NO
1
1
1
1
1
1
1
DESCRIPTION
PLEASE STATE THE CORRECT MACHINE SERIAL NUMBER AND PART NUMBER WHEN ORDERING PARTS
QTY
REF PART NO
1
2
3
4
5
6
120502
990600
990601
Cylinder Assy
Barrel
Piston Rod
1" BSF Nut
Split pin
Piston Head
Gland Nut
7 SK/63/175/A Seal Kit
990602
990604
1300, 1600 and 2000 Door Cylinder Assembly
DESCRIPTION
1300, 1600
QTY REF PART NO
1
1
1
1
1
1
1
1
5
6
3
4
1
2
200502
990617
990618
990619
990620
990621
DESCRIPTION
2000, 3000
Door cylinder, complete
Barrel Assembly
Piston Rod
1" B.S.F.Nut
Split Pin
Piston Head
Gland Nut
7 990622 Seal Kit
990622kramp Seal Kit
PLEASE STATE THE CORRECT MACHINE SERIAL NUMBER AND PART NUMBER WHEN ORDERING PARTS
QTY
1
1
1
1
1
1
1
1
1
REF PART NO
1 990616 LINCH PIN
DESCRIPTION
2 PLAIN WASHERS
3 200973 SPACER
4 200934 LEVER ASSY
5 120600 TENSION SPRING
TRAY TENSIONER LEVER ASSY
QTY REF PART NO
2
4
2
1
2
DESCRIPTION
PLEASE STATE THE CORRECT MACHINE SERIAL NUMBER AND PART NUMBER WHEN ORDERING PARTS
QTY
REF PART NO
1 201123 COVER
2 201119 SPRING
3 201110 ROLLER
4 201106 INDICATOR
5 201104 ROLLER PIN
DESCRIPTION
6 201118 WIRE ROPE AND CLEVIS
DOOR INDICATOR ASSY
QTY REF PART NO
1
1
2
1
1
1
DESCRIPTION QTY
PLEASE STATE THE CORRECT MACHINE SERIAL NUMBER AND PART NUMBER WHEN ORDERING PARTS
BLUE
RED
GREEN & YELLOW
CLOSE DOOR – RED
OPEN DOOR – BLUE
BRAKE – GREEN / YELLOW
REF PART NO DESCRIPTION
1300 Dual Spreader
1 990201 Male Q/R coupling
2 990202 Female Q/R coupling brake
3 990206 ½Dowty Washer
4 990213 ¼" MMM 'T' Junction
6 200503 Brake cylinder
7 110502 Front Door Hose (5.76m)
8 110501 Rear Door Hose (6.63m)
9 110507 Brake hose to tractor (5.6m)
10 110504 RH Brake Hose (1.07m)
11 110503 LH Brake Hose (0.83m)
2000 Dual Spreader
1 990201 Male Q/R Coupling
2 990202 Female Q/R Coupling
3 990206 ½ Dowty Washer
4 990213 ¼ MMM 'T' Junction
6 990623 Brake Cylinder
7 200543 Door Hose (6.0m)
8 As 7 Door Hose (6.0m)
9 200544 Brake Hose to tractor (6.0m)
10 200545 RH Brake Hose (0.83m)
11 200546 LH Brake Hose (1.07m)
2
1
1
1
1
3
1
2
1
2
1
1
1
1
1
1
1
2
1
3
QTY
HYDRAULICS
REF PART NO DESCRIPTION
1600 Dual Spreader
1 990201 Male Q/R Coupling
2 990202 Female Q/R Coupling
3 990206 ½Dowty Washer
4 990213 ¼" MMM 'T' Junction
6 200503 Brake cylinder
7 110502 Front Door Hose (5.76m)
8 110501 Rear Door Hose (6.63m)
9 110507 Brake Hose to tractor (5.6m)
10 160506 RH Brake Hose (1.07m)
11 160505 L H Brake Hose (0.83m)
3000 Dual Spreader
1 990201 Male Q/R Coupling
2 990202 Female Q/R Coupling
3 990206 ½ Dowty Washer
4 990213 ¼ MMM 'T' Junction
6 990623 Brake Cylinder
7 200543 Door Hose (6.0m)
8 As 7 Door Hose (6.0m)
9 570544 Brake Hose to tractor (6.0m)
10 200545 RH Brake Hose (0.83m)
11 200546 LH Brake Hose (1.07m)
PLEASE STATE THE CORRECT MACHINE SERIAL NUMBER AND PART NUMBER WHEN ORDERING PARTS
1
1
1
2
2
1
3
1
1
1
1
1
2
1
1
1
QTY
2
1
3
1
REF PART NO DESCRIPTION
1 201720 COMPLETE SET
2 201721 TRACTOR LEAD
3 201722 7 PIN PLUG
4 201723 7 PIN SOCKET
5 201724 FRONT LIGHT COMPLETE
8 201727 RH REAR LIGHT COMPLETE
9 201728 LH REAR LIGHT COMPLETE
12VC5W-E8-3E2T118
2821LUXLAMP12VR5W 37R-E13-2A1
CAB12VP214-E13-2A3
DUAL LIGHTS
QTY
1
1
2
1
2
1
1
PIN 1 GREEN
PIN 2 BLUE
PIN 3 WHITE
PIN 4 YELLOW
PIN 5 BROWN
PIN 6 RED
LIGHTING CONNECTIONS
PIN 7 BLACK
BULBS
REAR SIDE 12Volt 5Watt
FRONT SIDE 12Volt 5Watt
BRAKE AND INDICATOR 12Volt 21Watt
LH INDICATOR LAMP
REAR FOG LAMP
EARTH RETURN
RH INDICATOR LAMP
RH TAIL & NO PLATE LAMP
STOP LAMP
LH TAIL & NO PLATE LAMP
2 off
2 off
4 off
PLEASE STATE THE CORRECT MACHINE SERIAL NUMBER AND PART NUMBER WHEN ORDERING PARTS
3
1
1
2
4
REF PART NO
1 571700 COMPLETE SET
2 201721 TRACTOR LEAD
3 252901BR FL REAR LIGHT
4 252901BR FL FRONT LIGHT
DESCRIPTION
GE2619F
GE1057F
GE1077F
3000 DUAL LIGHTS
QTY
1
1
2
2
PIN 1 GREEN
PIN 2 BLUE
PIN 3 WHITE
PIN 4 YELLOW
PIN 5 BROWN
PIN 6 RED
LIGHTING CONNECTIONS
PIN 7 BLACK
BULBS
FRONT LIGHT BULB
ORANGE REAR LIGHT BULB
RED REAR LIGHT BULB
LH INDICATOR LAMP
REAR FOG LAMP
EARTH RETURN
RH INDICATOR LAMP
RH TAIL & NO PLATE LAMP
STOP LAMP
LH TAIL & NO PLATE LAMP
PLEASE STATE THE CORRECT MACHINE SERIAL NUMBER AND PART NUMBER WHEN ORDERING PARTS
REF PART NO
1
2
10053
14367
Hub cap
Split Pin
3 5802061 Castle Nut
DESCRIPTION
4 7329307 Washer
5 1328981 Hub (8x22mm Stud)
6 505026 Outer Bearing 32211
7 3260193 Wheel Stud M18
8 10115 Wheel Nut M18
9 908408S Stub Shaft
10 505027 Inner Bearing 32017
11 6002064 Rear Washer
12 4008054 Spring
13 408100S Back Plate
14
15
Cam Shaft
Brake lever
17 4008053 Brake shoe & Linning
18 Grease nipple
19 WB1215 Sealing washer
20 Circlip
21 408TSM80 Drum (8 x 18Ø studs)
23 CBAG2032 Bearing Cam shaft
24 Circlip
4
2
2
2
16
2
2
2
2
2
2
16
2
2
2
2
2
2
2
2
2
4
1300 & 1600 STUB AXLE
QTY REF PART NO DESCRIPTION
PLEASE STATE THE CORRECT MACHINE SERIAL NUMBER AND PART NUMBER WHEN ORDERING PARTS
QTY
REF PART NO DESCRIPTION
1 3780000500 Support of brake
2 3780000120 Brake cover
3 3407000000 Brake Shoes
4 2237512000 Right Cam Shaft
4 2237512100 Left Cam Shaft
5 3472010100 Central Roller Brake
6 3472010000 Fixed centre roller
7 3161019000 Cam bush
8 3161019100 Fixed Bush
9 3392060000 Cam Stop Ring
10 3780000600 Cam Joint Ring
11 3492006300 Shoe brake spring (long)
12 3492006400 Shoe brake spring (short)
13 3516000000 Washer
14 3516000100 Washer
15 3261003500 Circlip
16 3261020000 Brake Spring Clip
17 3261021000 Brake roller clip
18 3182008000 Rod
19 3372004000 Grease Nipple
20 3492008500 Brake Return Spring
21 4560019200 Drum
22 4435500900 Axle Body Bracing Bush
23 443600160A Rear Washer (1010 XR – 1110 X)
24 3534026100 Bearing (32219)
2000 STUB AXLE
QTY REF PART NO
2
4
4
1
1
4
4
4
4
4
4
2
4
2
2
2
2
2
2
2
2
2
2
2
4
26 324101700A Cap
27 3351016000 Wheel Stud
28 3314011000 Wheel Nut
DESCRIPTION
30 336400100A Spring Pin
31 4419047000 Hub (1010 XR – 1110 XF)
25 330201000A Castle Nut
29 4793032100 Axle Beam (1010XFR 406 x 120)
PLEASE STATE THE CORRECT MACHINE SERIAL NUMBER AND PART NUMBER WHEN ORDERING PARTS
2
QTY
2
2
20
20
1
2
COMPLETE P.T.O. DRIVE SHAFT
PART NO. 200539
Shear Pin M8 x 55 x Grade 12.9
990541
Download
Public link updated
The public link to your chat has been updated. You may view and manage your chat links after registration here.
Document public link
Advertisement
