Neck Pickup:
EMG-HZ H4A
EMGHZ
Bridge Pickup:
EMG-HZ H4
Damien Riot FR
Wiring Diagram
Black & White
Green
Red
Bridge ground wire
Bare
Black & white wires from pickup soldered together and insulated.
Volume
500k
Black & white wires from pickup soldered together and insulated.
EMGHZ
Black & White
Red
Green
Bare
3-way lever switch
1
2
3
Neck
3-way switch settings
1 2 3
Bridge
Tone
500k
.022
Master Vol
Master Tone
3
2
1
3-Way
Switch
For technical or warranty questions please email: [email protected]
Diagram copyright Schecter Guitar Research 2011
Tip (hot output)
Sleeve (ground)
Output Jack
= ground. This symbol is found where any ground connection should be soldered.
c d a b
Damien Riot FR
Neck Specs:
Scale Length: 648mm/25.5”
A: Width at Nut- 42mm
B: Width at Last Fret- 58mm
C: Thickness at 1st Fret- 20mm
D: Thickness at 12th Fret- 22mm
Radius: 355mm/14”
radius
Bridge Pickup
Name:
Model No:
Construction:
Magnet:
Output:
EMG-HZ H4
H4
Humbucker
Ceramic
Description:
13.65K ohm
Combining the power of the active
81 with the soul of a passive PAF, the tone is well balanced, with tight bass, glassy mids, and crunchy highs. These great tonal features are achieved by utilizing over wound coils loaded with ceramic bar magnets, all fully shielded for minimal noise.
Strings
Neck Pickup
Name:
Model No:
Construction:
Magnet:
Output:
Description:
EMG-HZ H4A
H4A
Humbucker
Alnico V
13.65K ohm
The tone is very well-balanced, with solid bass, pronounced mids, and fat highs. These great tonal features are achieved by utilizing vintage wound coils loaded with Alnico V bar magnets, all fully shielded for minimal noise.
6-String Guitar*
Tuning: E-A-D-G-B-E
Gauge: .046-.036-.026-.017-.013 .010
(EB Regular Slinky #2221)
*Changing to different string gauges and/or alternate tunings may require minor neck/bridge adjustments for optimal performance. For Schecter setup tips refer to Schecter Setup Guide.
