Steamist SMS-100 Instructions For Installation And Use Manual

Steamist sMS-100 is a sauna heater designed for heating large saunas to bathing temperature. It is important to note that this heater should only be used for its intended purpose and not for any other purposes. Before using the heater, it is crucial to read the user's instructions carefully. The sMS-100 is controlled by a separate control unit that should be located outside the sauna room in a dry place, at an approximate height of 5 ft. The temperature sensor, which is used to maintain the set temperature in the sauna room, must be connected to the control unit. Both the SMS-100 and its control unit are essential for operating the heater effectively.

PDF Download
Document
Steamist SMS-100 Instructions For Installation And Use Manual | Manualzz

Advertisement

Advertisement

Advertisement

Key features

  • Suitable for heating large saunas
  • Controlled by a separate control unit
  • Temperature sensor maintains set temperature
  • Solid blocks of stone used as sauna stones
  • Stones should be 2-4" in diameter

Frequently asked questions

The Steamist SMS-100 thru SMS-145-3 sauna heaters are designed for the heating of large saunas to bathing temperature.

The sauna stone for an electric heater should be 2-4" in diameter. The heater stones should be solid blocks of stone specially intended for use in the heater.

The stones should be piled into the stone compartment over the grating, between heating elements (resistances) so that the stones support each other. The weight of the stones should not lie on the heating elements.
Preparing document for printing…
0%