D-Link Express EtherNetwork DI-604 Quick Installation Manual

Add to My manuals
12 Pages

advertisement

D-Link Express EtherNetwork DI-604 Quick Installation Manual | Manualzz

This product can be set up using any current web browser, i.e., Internet Explorer 5x,

Netscape Navigator 4x.

DI-604

Express EtherNetwork™

Broadband Router

Before You Begin

1. If you purchased this router to share your high-speed Internet connection with other computers, you must have either an Ethernet-based Cable or a DSL modem with an established Internet account from an Internet Service Provider (ISP).

2. It’s best to use the same computer that is connected to your modem for configuring the DI-604 router. The DI-604 Router acts as a DHCP server and will assign all the necessary IP address information on your network. See Appendix at the end of this Quick Installation Guide or the Manual on the CD-ROM for setting each network adapter to automatically obtain an IP address.

Check Your Package Contents

These are the items included with your DI-604 purchase:

• DI-604 Ethernet Broadband Router

• CD-ROM (containing Manual and Warranty)

• Ethernet (CAT5 UTP/Straight-Through) Cable

• 5V DC, 2A Power Adapter

Using a power

supply with a different voltage rating will damage and void the warranty for this product.

If any of the above items are missing, please contact your reseller.

©2002 D-Link Systems, Inc. All rights reserved. Trademarks or registered trademarks are the property of their respective holders. Software and specifications subject to change without notice. DI-604.05082002

Connecting The DI-604 Broadband Router

To Your Network

A.

First, connect the power adapter to the receptor at the back panel of the DI-604 and then plug the other end of the power adapter to a wall outlet or power strip. The Power LED will turn ON to indicate proper operation.

B.

Insert one end of an Ethernet cable to the WAN port on the back panel of the DI-604 and the other end to the Ethernet port located on your Cable or DSL modem. The WAN LED light will illuminate to indicate proper connection.

C.

Insert one end of an Ethernet cable to LAN port 1 on the back panel of the DI-604 and the other end to an available Ethernet port on the network adapter in the computer you will use to configure the DI-604.

The LED light for LAN Port 1 will illuminate to indicate proper connection. (Note: Some computers already have network adapters pre-installed.)

A .

Receptor for

Power Adapter

Reset Button

Pressing this button restores the router to its original factory default settings.

C .

LAN Ports

These are the connections for

Ethernet cables to your Ethernetenabled computers

Restart Your Computer

B .

WAN Port

This is the connection for the

Ethernet Cable to

Ethernet Port on the

Cable or DSL

Modem.

Connecting Additional Computers To The

DI-604 Broadband Router

Using additional Ethernet (CAT5 UTP/Straight-Through) cables, connect your Ethernet-equipped computer(s) to one of the 3 remaining Ethernet

LAN ports on the back panel of the DI-604.

LAN Port LEDs.

Each of the

LAN ports on the back of the

DI-604 have a corresponding

LED light on the front panel of the unit. When a proper connection has been made to a computer that is ON, the

LED on the front panel should illuminate.

When you have completed the steps in this Quick Installation Guide, your connected network should look similar to this:

Cable or DSL

Modem

DI-604 Ethernet

Broadband Router

Computers connected to the LAN Ports

Using The Setup Wizard

Open your Web browser and type

“http://192.168.0.1” into the URL address box.

Then press the Enter or

Return key.

The logon pop-up screen will appear.

Type “admin” for the username and leave the password field blank.

Click OK

Once you have logged in, the

Home

screen will appear.

Click Run Wizard

You will see the following screens.

Click Next

Step 1 - Set up your new password .

You have the option to establish a password.

Click Next

Step 2 Choose your time zone.

Click Next

The Setup Wizard (continued)

Select the type of Internet connection for your router.

Select one of these settings

Click Next

If you selected Dynamic IP

Address , this screen will appear:

If you are unsure of which setting to select, please contact your Internet

Service Provider.

Click the “Clone MAC

Address” button to automatically copy the MAC address of the network adapter in your computer. You can also manually type in the MAC address.

What is a MAC address?

Each network adapter has a discrete

Media Access Control (MAC) address. Note that some computers and peripherals may already include built-in network adapters.

Click Next

If your ISP requires a Static IP

Address , and this option is selected, then this screen will appear:

Enter the IP address information originally provided to you by your ISP .

You will need to complete all the required fields.

Click Next

If your ISP uses PPPoE (Point-to-

Point Protocol over Ethernet) and this option is selected, then this screen will appear:

Enter in the username and password provided to you by your ISP.

Click Next

Do not use displayed in these fields. They are only shown as an example.

Your Setup is Complete!

Click Restart

Click Close

You will be returned to the

Home

tab.

Test Your Internet Connection

Click Exit

Relaunch your Web browser (i.e., Internet

Explorer or Netscape

Navigator ), to link to your favorite Web site to test your Internet connection.

For additional settings or information, refer to the Advanced, Tools, or Status tabs on the web-management interface; or to the manual located on the

CD-ROM.

APPENDIX

To connect to the network, make sure the network adapter in your computer is configured properly. Here’s how to configure the network adapter to obtain an IP address automatically for the

DI-604 Broadband Router.

For Microsoft Windows XP:

Go to Start > right click on

My Network Places > select Properties > Double-click on the Network Connection associated with the Ethernet adapter (i.e.,

D-Link DFE-530TX+).

Click Internet Protocol (TCP/IP)

Click Properties

Select Obtain an IP address automatically

Click OK

Restart your computer

For Apple Macintosh OS X:

Go to the Apple Menu and Select System

Preferences .

Select Built-in

Ethernet in the Show pull-down menu

Select Using DHCP in the Configure pulldown menu

Click on

Apply Now

The IP address information, the Subnet Mask, the Router’s

IP address and the Ethernet adapter address will appear.

Click on

Network

Technical Support

You can find the most recent software and user documentation on the D-Link website.

D-Link provides free technical support for customers within the United States for the duration of the warranty period on this product.

U.S. customers can contact D-Link technical support through our web site or by phone.

D-Link Technical Support over the Telephone:

(800) 758-5489

24 hours a day, seven days a week

D-Link Technical Support over the Internet: http://support.dlink.com email: [email protected]

advertisement

Related manuals

Download PDF

advertisement