Getting Familiar with Your FuzzyScan
F400 Series
Thank you for choosing Cino FuzzyScan Imager. All FuzzyScan imagers deliver world-class performance for a broad range of applications to unleash your productivity. This document provides an easy reference for installation and operation purposes. A complete documentation is provided by the
FuzzyScan Programming Manual available at www.cino.com.tw
.
F700 Series
F600 Series
Power Indicator
Status Indicator
Trigger
Scan Window
Beeper
Cable Release Hole
1
Connecting to Your Host
USB
FuzzyScan imagers support PS/2(DOS/V) Keyboard Wedge, RS-232 Serial, and USB interfaces. Please choose your desired interface cable, then plug it into the cable interface port of the imager and connect it to the host. If you would like to remove the cable, please straighten one end of a paper clip, then insert it into the cable release hole to pull out the cable.
RS232 Serial
PS/2(DOS/V) Keyboard Wedge
2
Using Accessories
You can enhance productivity of your workforce by using various accessories to fulfill a wide variety of application demand.
Universal Holder
Hand-free SmartStand
A stylish Universal Holder is designed for storing your imager when not in use. It serves to protect the imager from lens-scratched or falling. Moreover, its artistic-design enhances the entire value of the imager.
A SmartStand is specifically designed for hand-free applications to maximize user’s comfort and productivity. You can adjust the scanner holder to desired position for optimized scanning.
Thanks to the auto-sense design, the imager is capable of switching between presentation scanning and hand-held scanning automatically while working with
SmartStand.
Please note that the SmartStand is not applicable for F400 Series imager.
3
Host Interface Quick Set
RS232 Serial
PS/2 (DOS/V) KBW Standard Mode
PS/2 (DOS/V) KBW Turbo Mode
USB HID Standard Mode ◆
USB Com Port Emulation
Operation Mode Quick Set
USB HID Turbo Mode
Low Power (Low power trigger)
Presentation (Auto sensing)
Flash (Pulse driven reading)
Toggle (Repeat reading)
Level (Auto power off)
Trigger Mode (External trigger) ◆
Alternative (Periodic power off)
Force (Continued power on)
Diagnostic (Test reading)
4
Keyboard Interface Quick Set
- Record Suffix -
None
TAB
SPACE
ENTER
USA ◆
- Keyboard Layout -
France
Germany
Canadian French
Spain
Latin America
Nertherlands
Japan
5
Serial Interface Quick Set
- Record Suffix -
None TAB
LF
CR ◆ SPACE
CRLF
- Baud Rate -
38.4K BPS 1200 BPS
19.2K BPS 600 BPS
9600 BPS ◆ 300
- Data Frame -
8, None, 1 ◆ 2
8, Even, 1
8, Mark, 1
7, Even, 1
7, Mark, 1
6
7, Even, 2
7, Mark, 2
System Commands
PROGRAM
(Enter Programming Mode)
END
(Exit Programming Mode)
System Information
Factory Default
Master Default
PowerTool Host Link
Save User Default
User Default
7
Keyboard Interface Control
Command
Keyboard Layout
Record Suffix
Preamble
USA ◆
France
Germany
United Kingdom-UK
Canadian French
Spain
Sweden/Finland
Portugal
Norway
None
RETURN ◆
TAB
SPACE
Parameter Selection
Latin America
Italy
Netherlands
Denmark
Belgium
Switzerland-Germany
Iceland
Japan
Universal
ENTER
User define character
None ◆
1-15 characters
Postamble None ◆
1-15 characters
Intermessage Delay None ◆
1-99 (x5) msec.
Intercharacter Delay None ◆
1-99 (x5) msec.
Interfunction Delay
Caps Lock Control
None ◆
1-99 (x5) msec.
“Caps Lock Off” State ◆
“Caps Lock On” State
Auto Detect
Caps Lock Release Control “Caps Lock On, Caps Off’’ ◆
“Caps Lock On, Shift Off’’
Function Key Emulation Enable ASCII 00-31 as KB function code output ◆
Enable ASCII 00-31 as Ctrl-xx output
Key Pad Emulation Disable key pad emulation ◆
Enable numeric output as key pad output
Upper/Lower Case Normal case ◆
Inverse case
Upper case
Lower case
8
FIN
(2 digits)
0
1
0
1
2
0
1
0
1
0
1
2
3
04
05
06
07
00
01
02
03
08
Option Code
13
14
15
16
09
10
11
12
99
4
5
FIN
[00-7F], [FIN]
FIN
[00-7F], [FIN]
FIN
(2 digits)
FIN
(2 digits)
0
1
2
3
Serial Interface Control
Command
STX/ETX Control
Parameter Selection
Disable STX/ETX transmission ◆
Enable STX/ETX transmission
Option Code
0
1
Record Suffix
Preamble
Postamble
None
CR ◆
LF
CRLF
None
◆
1-15 characters
None ◆
1-15 characters
Handshaking Protocol
Intermessage Delay
None ◆
RTS/CTS
ACK/ NAK
Xon/Xoff
None ◆
1-99 (x5) msec.
Intercharacter Delay None ◆
1-99 (x5) msec.
TAB
SPACE
User define character 2
3
0
1
FIN
[00-7F], [FIN]
4
5
6
FIN
[00-7F], [FIN]
2
3
0
1
FIN
(2 digits)
FIN
(2 digits)
Interfunction Delay None ◆
1-99 (x5) msec.
FIN
(2 digits)
Serial Response Time-out None
200 msec.
500 msec. ◆
1 sec.
2 sec.
5 sec.
User define value (sec.)
Message String Breakdown
Keyboard interface output (PS/2, DOS/V, USB HID)
Preamble Data Length Prefix ID Scanned Data Suffix ID
1-15 char. 2-3 digits 1 or 2 char. Variable 1 or 2 char.
Serial interface output (RS-232, USB COM Port Emulation)
Postamble
1-15 char.
STX
1 char.
Preamble Data Length Prefix ID Scanned Data Suffix ID Postamble
1-15 char. 2-3 digits 1 or 2 char. Variable 1 or 2 char. 1-15 char.
ETX
1 char.
2
3
0
1
Record
Suffix
1 char.
4
5
6
Record Suffix
1 char.
9
Operation and Output Control
Parameter Selection Command
Inverse Reading Disable ◆
Enable
Option Code
0
1
Redundancy
Dollar Sign Output
Presentation Control
Presentation Auto-sense
Presentation Sensitivity
Power On Indicator
None
Level 1 ◆
Level 2
Level 3
Level 4
Level 5
Scan Voting
Dollar sign output as “ $ “ ◆
Dollar sign output as “ ￥ “
Dollar sign output as “ € “
Dollar sign output as “ £ “
Dollar sign output as “¢ “
Presentation mode ◆
Flash mode
Force mode
Disable
Enable ◆
Buzzer Tone Control
Good Read Delay
Light Source On Time
Good Read Duration
Hand Free Time-out
Reread Delay
Level 1
Level 2
Level 3
Level 4
Disable (LED off)
LED steady on ◆
LED flash
Level 5
Level 6
Level 7
◆
Buzzer tone – mute
Buzzer tone – low
Buzzer tone – medium ◆
Buzzer tone – high
None ◆
200 msec.
500 msec.
1 sec.
Disable
Immediate time out ◆
Short time out
Medium time out
Short
Medium ◆
Long
Short ◆
Medium
Long
Extremely long
Short ◆
Medium
Long
Extremely long
Buzzer tone – extremely high
Power–on beep ◆
No Power–on beep
1.5 sec.
2 sec.
3 sec.
Long time out
Force verification
Double Scan Verification
Extremely long
Extremely short
2
3
0
1
0
1
2
0
1
2
0
1
0
1
2
3
2
0
1
0
1
2
3
2
3
0
1
2
3
0
1
0
1
2
6
4
5
4
5
6
4
5
3
4
4
5
6
0
1
2
3
0
1
2
3
4
5
3
4
10
Option Codes
2
3
0
1
5
6
4
7
8
9
11
FIN (Finish)
END (Exit)
B
C
A
D
F
E
© Copyright Cino Group
© Copyright PC Worth Int’l Co., Ltd
Cino makes no warranty of any kind with regard to this publication, including, but not limited to, the implied warranty of merchantability and fitness for any particular purpose. Cino shall not be liable for errors contained herein or for incidental consequential damages in connection with the furnishing, performance, or use of this publication. This publication contains proprietary information that is protected by copyright. All rights are reserved. No part of this publication may be photocopied, reproduced or translated into any language, in any forms, in an electronic retrieval system or otherwise, without prior written permission of Cino. All product information and specifications shown in this document may be changed without prior notice.
Warranty
Cino warrants its products against defects in workmanship and materials from the date of shipment, provided that the product is operated under normal and proper conditions. The warranty provisions and durations are furnished by different warranty programs. The above warranty does not apply to any product which has been (i) misused; (ii) damaged by accident or negligence;
(iii) modified or altered by the purchaser or other party; (iv) repaired or tampered by unauthorized representatives; (v) operated or stored beyond the specified operational and environmental parameters; (vi) applied software, accessories or parts are not supplied by Cino; (vii) damaged by circumstances out of Cino’s control, such as, but not limited to, lightning or fluctuation in electrical power. Any defective product must follow the warranty program and RMA procedures to return Cino for inspection.
Regulatory
FCC part 15B
EN55022, EN55024, EN61000-3-2, EN61000-3-3
CNS13438
Industry Canada ICES-003
LED Eye Safety IEC60825-1, EN60825-1
12
www.cino.com.tw
FuzzyScan Family Quick Start Guide
International Edition, Rev. B1
P/N: YMAUB00010020R0
CINO GROUP
PC WORTH INT’L CO., LTD.
© Copyright PC Worth Int’l Co., Ltd.
© Copyright Cino Group.
