ESDEC Clickfit Evo Manual
ESDEC Clickfit Evo is a versatile and durable mounting system designed to securely install solar panels on roofs with slopes ranging from 15 to 60 degrees. Its key features and capabilities include:
- Wide Compatibility: Compatible with all brands and models of solar panels with a maximum frame edge thickness of 2 mm and a maximum weight of 25 kg.
- Adjustable Design: The installation support can be adjusted to fit mounting holes with a minimum diameter of 6.5 mm and a maximum distance from the center of the hole to the frame edge of 17 mm.
- Integrated Cable Management: The installation support features an integrated cable clip to guide and secure cables, ensuring a neat and organized installation.
Advertisement
Advertisement
Item number: 100-8064
Safety warnings
•
The installation support should only be used by qualified technical staff.
•
Do not install in windy conditions and on a wet and slippery roof surface.
•
When working on a sloping roof, always use fall protection. Use safety nets and edge protection when necessary.
•
Slide roof tiles up to create spaces to put your feet. Warning: Never stand in the gutter.
•
Wear safety shoes with reinforced toecaps and sturdy, slip-resistant soles.
•
Always wear the right protective clothing when carrying out the work.
•
Ladders must always be placed on a firm and stable surface.
•
Ladders must be positioned at a 75-degree angle and make sure the ladder extends about 1 meter above the roof edge.
•
If possible, secure the top of the ladder with rope or straps.
• Make sure you follow the instructions in the manual “Working Safely on Roofs”.
Application range for the ClickFit Evo Installation Support
•
All brands and models of solar panels with a maximum frame edge thickness of 2 mm and a maximum weight of 25 kg.
•
Minimum diameter of the mounting hole: 6.5 mm
•
Maximum distance from the center of the mounting hole to the frame edge: 17 mm
•
Maximum load per installation support: 30 kg.
•
Roof slope: Between 15 and 60 degrees (optimum slope is 35 degrees).
Attaching the installation support
1. Press down the click tab with your thumb.
2. Slide the installation support onto the edge of the panel, making sure the tab on the click tab fits in the installation hole.
3. Repeat steps 1 and 2 for the opposite panel edge to attach the second installation support.
4. Optional: secure the cable in the integrated cable clip on the installation support to guide the cable.
5. Then install the solar panel on the horizontal mounting rails, making sure the installation support hooks behind the edge of the upper mounting rail.
Please note! Make sure the solar panel does not exert too much force on the installation support.
Install with care!
THIS INSTALLATION SUPPORT MUST BE KEPT IN GOOD CONDITION BEFORE USE!
Please contact the supplier for information on the warranty term and warranty conditions.
Please, also see the General Terms of Sale and Delivery, available on request.
The manufacturer rejects any liability for damage or injury caused by failing to strictly follow this instruction manual or failing to use normal care during transport, mounting and use of the ClickFit Evo mounting system.
Because of our continuous efforts for improvement, details of the product may differ from the description in this manual. For this reason these instructions are only a guideline for installing the product in this manual. This manual has been drawn up with great care. However, the manufacturer cannot accept responsibility for any errors in this manual or for the consequences of such errors.
All rights reserved. No part of this manual may be reproduced in any form
.

Public link updated
The public link to your chat has been updated.
Advertisement