Jetson JGBS User Manual
Advertisement
Advertisement
GRAVITY BALANCE BIKE
MODEL #: JGBS | VERSION #: 1
USER MANUAL
1
Congratulations on your new Jetson Gravity Balance Bike! Please note, this is not an electric device. Before your first ride, please check whether the wheels are damaged, or parts are loose. If there are any abnormalities, please contact Jetson Customer Support at
1-(888) 976-9904, or email [email protected].
This product manual can help you understand, assemble, use, and maintain your Jetson Gravity Balance Bike. In order to avoid danger caused by collisions, falls, and loss of control, please use caution and learn how to ride the
Jetson Gravity Balance Bike safely. Jetson and authorized dealers cannot be held liable for injury or damage caused from riding the Jetson Gravity Balance Bike. Falling, losing control, and collisions (including failure to obey the
Jetson Gravity Balance Bike manual) may cause injury. In order to minimize the risk, ensure you read the Jetson Gravity Balance Bike manual carefully.
Users ride at their own risk.
The user is responsible for consequences caused by violating warnings or improper operations.
If for any reason you want to return this product, please call us at 1-(888)
976-9904 or email us at [email protected] before returning it to the store.
WHAT’S IN THE BOX:
• 1 x Gravity Balance Bike
• 2 x Bearing Bushings
• 3 x Headset Caps
• 1 x Pipe Clip
• 1 x Allen Wrench
Model #: JGBS | Version #: 1
FOR YOUR SAFETY:
• This product is suitable for children age 2-5, and for use on private property and closed courses. Always drive defensively, and watch out for potential obstacles that may catch your wheel or cause you to swerve suddenly.
• The Jetson Gravity Balance Bike should always be used under supervision.
• Always check any local laws or regulations which may affect where the
Jetson Gravity Balance Bike may be used.
• Ride at your own risk and use common sense. Any rider that is unable to fit comfortably on the vehicle should not attempt to ride it. All decisions on who is allowed to ride the Jetson Gravity Balance Bike should be made based on their maturity, skill, and ability to follow the rules.
• The Jetson Gravity Balance Bike is designed for one rider, with a maximum weight of 65 pounds. Never carry passengers, and do not attach the Jetson
Gravity Balance Bike to other objects.
• This product was manufactured for performance and durability, but is not impervious to damage. Jumping and aggressive riding should be avoided under all circumstances. The rider assumes all responsibility and risk associated with high-stress activity.
• Keep your fingers and other body parts away from all other moving compo nents when operating the Jetson Gravity Balance Bike. Keep your hands on the handlebars at all times.
• Do not wear headphones or use a cell phone while operating the Jetson
Gravity Balance Bike.
• Do not operate the Jetson Gravity Balance Bike in wet or icy weather, and never immerse the product in water.
• Avoid excessive speeds when riding downhill, as it increases the risk of accident and injury. Avoid wet, slick, bumpy, uneven or rough surfaces while using the Jetson Gravity Balance Bike. Never risk damaging surfaces such as carpet and flooring by using the product indoors.
• Do not ride at night, or when visibility is limited.
• Always wear proper protective equipment, such as a helmet, elbow pads, and knee pads. Athletic shoes with rubber soles are best for riding the Jetson Gravity Balance Bike.
• Never operate the product barefooted or in sandals, and keep shoelaces tied and out of the wheels.
Model #: JGBS | Version #: 1
2
OVERVIEW:
3
1) Handlebar
2) Pipe Clip
3) Front Frame
4) Headset Bushing (Headset Cap with Bearing Bushing)
5) Front Fork
6) Seat
7) Wheel
Model #: JGBS | Version #: 1
ASSEMBLY INSTRUCTIONS:
1. Insert a Headset Cap and Bearing Bushing (4) into the top of the Front Fork (5).
2. Insert the Front Fork (5) through the Front
Frame tube (3) and slide it down against the
Headset Cap and Bearing Bush (4). Place the remaining Headset Cap and Bearing
Bushing in the top of the Front Fork tube.
3. Put the Pipe Clip (2) in the top of the Front
Fork tube, and insert the Handlebar (1) into the Pipe Clip. Tighten using the included
Allen Wrench.
Model #: JGBS | Version #: 1
4
5
The Jetson Gravity Balance Bike has the ability to raise and lower the seat, depending upon the height of the child.
NOTE: Seat and handlebar heights must be adjusted before your first ride. The proper riding position is seated comfortably, with legs completely straight and able to touch the ground with the tips of your toes. Always check the seat and handlebar heights before riding.
To adjust the seat height, you must change the Connection Plate (as pictured to the right). To raise the seat, insert the Connection Plate with the opening upwards. To lower the seat, flip the Connection Plate so the cross bracing faces upwards.
Model #: JGBS | Version #: 1
PRODUCT REGISTRATION
Please complete and mail this card within 10 days of purchase.
Name: _____________________________________________________________________
Age: _______________________________________________________________________
Address: ___________________________________________________________________
City, State, Zip: _____________________________________________________________
Email: _____________________________________________________________________
Home Phone: __________________ Work Phone: ________________________________
Purchase Date: ___________ Purchased from: _________________________________
Serial Number: _____________________________________________________________
Product: ___________________________________________________________________
Gender: _______________ Occupation: ________________________________________
Is this your first Jetson product? _____________________________________________
Other similar product owned before: _________________________________________
How did you hear about the Jetson ® Gravity Balance Bike?
____________________________________________________________________________
____________________________________________________________________________
Complete this form and mail it to:
Attention: Product Registration
Jetson Electric Bikes
1 Rewe Street
Brooklyn, NY 11211
A LEADER
IN ELECTRIC TRANSPORTATION
888-976-9904
[email protected]
IF YOU LIKE THIS PRODUCT, PLEASE CHECK OUT THE
OTHER PRODUCTS ON OUR WEBSITE, INCLUDING OUR:
• ELECTRIC BICYCLE
• FOLDING ELECTRIC SCOOTER
• ELECTRIC MOPED
• ELECTRIC SKATEBOARD
...AND MORE!
WWW.JETSONBIKE.COM

Public link updated
The public link to your chat has been updated.
Advertisement