Lilliput Q7 User Manual
Lilliput Q7 is an impressive 7-inch monitor with high resolution (1920x1200), wide voltage range (DC 7-24V), and high brightness (500cd/㎡). It can convert between SDI and HDMI signals and display recording information. The metal housing provides durability, and various buttons and dials allow for easy menu navigation and adjustment of settings. Explore its features to enhance your video production experience.
Advertisement
Advertisement
User Guide
0
IMPORTANT SAFETY INSTRUCTIONS:
Please read User Guide before using this product.
Please keep User Guide for future reference.
Please read the cautions to prevent possible danger and loss of property.
FEATURES:
High resolution: 1920×1200;
Wide voltage: DC 7-24V;
High brightness: 500cd/ ㎡ ;
High contrast: 1000:1;
SDI and HDMI cross conversion;
Integrated recording info. display;
Metal housing.
CAUTIONS:
1. Please do not place the display screen towards the ground.
2. Please avoid heavy impact or drop onto the ground.
3. Please do NOT use chemical solutions to clean this product. Please wipe with a clean soft cloth to maintain the brightness of the surface.
4.
Please do not block any vent hole.
5. Please follow the instructions and trouble-shootings to adjust the product. Other improper adjustment may result in damage. Any further adjustment must be performed or conducted by a qualified technician.
6.
Please unplug the power and remove the battery if long-term no-use, or thunder weather.
Contents
1. PRODUCT DESCRIPTION ......................................................................................................... 2
2. DV BATTERY MOUNT PLATE .................................................................................................. 3
3. MENU SETTING ......................................................................................................................... 5
7. ACCESSORIES ............................................................................................................................ 9
8. PARAMETERS ........................................................................................................................... 10
9. TROUBLE SHOOTING ............................................................................................................. 10
YP-01151229
1
1. PRODUCT DESCRIPTION
1
.
Power ON/OFF: “ ○ ” is power OFF; “|” is power ON.
2
.
MENU Dial: Turn the dial to adjust volume;
Menu function: press to activate menu displayed on screen when power on.
Option function: select option via dialing to the left or right.
Confirm function: press to confirm after option selected.
3
.
EXIT
4
.
F1
、
F2
、
User-definable buttons.
Default functions:
( function customized to meet your needs
)
F1 Waveform F2 Scan
5
.
INPUT: circularly switch among of SDI and HDMI.
6. Fan cooling holes
7
.
Speaker
8
.
SDI input interface.
9
.
SDI output interface.
10
.
Earphone jack.
11
.
HDMI output interface.
12
.
HDMI input interface.
13
.
DC 12V power input.
2
2. DV BATTERY MOUNT PLATE
Standard mounts process
Following three types of battery plates are suitable for this device, model
F970, QM91D, DU21 & LP-E6 (choose 2 out of 4).
MODEL: F-970 MODEL: QM91D MODEL: DU21 MODEL: LP-E6
DV Battery Mount Plate:
DV Battery Mount Plate Specification:
Model DU21 for battery of Panasonic DV:
NV-GS/PV-GS/DZ-MV/GS/H28/H258/H288GK series, comply with
Panasonic battery DU06/VBD140/SANYO DZhs301sw/Hitachi
DZ-HS303SW/BZ-BP14S/DZ3200/BP07W.
Model QM91D for battery of SONY DV:
DSCR1/F/S/MVCCD/E/HC15E/HC1E/AE1u/DCRTRV828/E/CCD-TRV
116/DCR-DVD/PS105K/300K/10P/1E series.
Model F970 for battery of SONY DV:
DCR-TRV series, DCR-TRV E series, VX2100E PD P series, GV-A700,
GV-D800 FD/CCD-SC/TR3/FX1E/HVR-AIC, HDR-FX1000E, HVR-Z1C,
HVR-V1C, FX7E F330.
Model LP-E6 for battery of Canon DSLR:
5D Mark II/5D Mark III/EOS7D/EOS60D;
3
Plate Bracket
V-mount battery plate (optional):
Please refer to GP-L130AB type battery specifications.
V-mount Battery Plate
Plate Bracket
Anton Bauer mount battery plate (optional):
Please refer to
GP-L130B type battery specifications.
Anton Bauer Mount Battery Plate
4
3. MENU SETTING
Before setting the functions, please make sure the device is connected correctly.
3-1. Shortcut keys:
3-1-1. the image menu
Dialing to the left or right when power on, brightness will appear at the bottom of the screen, then press the dial to switch among of
brightness, sharpness, contrast, saturation, volume, tint, MENU and Exit.
User can adjust the value of the selected option via the dial.
3-1-2. F1-F2 2 user-definable function buttons:
Long press any F1-F2 key for 3-5 seconds to pop-up shortcut menu directly. As shown in Figure
(default menu button in white font).
Select option via dialing to the left or right.
Press to confirm option as default, then press
EXIT to exit.
Functions of F1-F2 buttons can also be customized: Center Marker, Aspect Marker, Check
Field, Underscan, Scan, Aspect, DSLR, Freeze, H/V delay, Peaking, False Color, Exposure, Histogram,
Level Meter, Waveform and Time Code.
F1-F2
:
2 user-definable function buttons
Default function:
F1 Waveform F2 Scan
3-2. MENU Operation
When power on, press “ MENU” on the device. The menu of function setting will display on the screen.
Dialing left or right to choose menu, and press to confirm, and then press EXIT to return.
3-2-1 、 Picture
5
ITEMS
Brightness
Contrast
Saturation
Tint
Sharpness
Color Temp
3-2-2 、 Marker
OPTIONS
0 – 100
0 – 100
0 – 100
0 – 100
0 – 100
5500ºK /6500ºK/7500 ºK/9300 ºK/User
Red Gain
Green Gain
0 – 255 Note: Available
0 – 255 only u nder “User”
Blue Gain 0 – 255 mode to choose
Red Offset 0 – 511
Green Offset 0 – 511
Blue Offset 0 – 511 the color value you need.
ITEMS
Center Marker OFF, ON
OPTIONS
Aspect Marker OFF, 16:9, 1.85:1, 2.35:1, 4:3, 3:2
Safety Marker OFF, 95%, 93%, 90%, 88%, 85%, 80%
Marker Color Red, Green, Blue, White, Black
Marker Mat OFF, 1 – 7
Thickness 2, 4, 6
6
3-2-3 、 Function
Scan
ITEMS
Aspect
Underscan
H/V Delay
Check Field
Zoom
Freeze
DSLR
3G Format
OPTIONS
Zoom, Aspect, Pixel TO Pixel
(Options can be adjusted only under scan mode.)
Full, 16:9, 1.85:1, 2.35:1, 4:3, 3:2
OFF, ON
OFF, H, V, H/V
OFF, Red, Green, Blue
10%~90% (step value is 10%)
OFF, ON
OFF, 5D2, 5D3
Normal, GBRA444 10Bit, YCbCrA444 10Bit,
YCbCrA422 12Bit, GBR444 12Bit, YCbCr444 12Bit
(Available under SDI mode only.)
3-2-4 、 Waveform
ITEMS
Waveform
Peaking
Peaking Color
Peaking Level
OPTIONS
Multi 、 Y 、 YCbCr 、 RGB 、 OFF
OFF, ON
Red, Green, Blue, White
0 – 100
7
False Color
Exposure
Exposure Level
Histogram
Time Code
3-2-5 、 AUDIO
OFF, ON
OFF, ON
0 – 100
Y, RGB, Color
OFF, LTC, VITC (available under SDI mode only.)
Volume
ITEMS
Level Meter
Audio Ch
3-2-6 、 SYSTEM
OPTIONS
0 – 100
OFF, ON (default as on under waveform multi function.)
Ch1&Ch2, Ch3&Ch4, Ch5&Ch6, Ch7&Ch8,
Ch9&Ch10, ChH11&Ch12, Ch13&Ch14,
Ch15&Ch16
(available under SDI mode only.)
ITEMS
Language English, Chinese
OPTIONS
8
HDMI/SDI Convert
Color Bar
OSD Timer
Image Flip
Back Light
Fan
Reset
OFF, ON
OFF, 100%, 75%
10s, 20s, 30s
OFF, H, V, H/V
0
– 100
Low, High
OFF, ON
*HDMI/SDI cross conversion function can realize signal transmits from SDI input to
HDMI output and from HDMI input to SDI output.
7. ACCESSORIES
Standard:
1. Folding sun shade cover 1 piece
2. HDMI A/C cable 1 piece
3. Shoe mount 1 piece
4. VESA battery plate 1 piece
5. Battery plate(QM91D, DU21, F970, LP-E6) 2 piece
6. Battery Plate bracket 1 piece
7. 12V DC adapter 1 piece
8. Manual 1 copy
Optional:
1. Anton Bauer mount 1 piece
2. V-mount 1 piece
3. Battery 1 piece
9
8. PARAMETERS
Panel 7 ”
Aspect Ratio 16:10
Physical Resolution 1920×1200 (324ppi)
Brightness 500 cd/ ㎡
Contrast
Viewing Angle
Input Voltage
1000: 1
170°/ 170°(H/V)
DC 7-24V
Input Signal 3G-SDI, HDMI
Power Consumption ≤13W
Operating Temperature -20
℃
~60
℃
Storage Temperature
Dimension (LWD)
Weight
-30
℃
~70
℃
182×124×22mm
405g
9. TROUBLE SHOOTING
1. Only black-and-white display:
Check whether the color saturation is properly setup or not.
2. Power on but no pictures:
Check whether the cables of 3G-SDI and HDMI are correctly connected or not. Please use the standard power adapter coming with the product package. Improper power input may cause damage.
3. Wrong or abnormal colors:
Check whether the cables are correctly and properly connected or not.
Broken or loose pins of the cables may cause a bad connection.
4. When on the picture shows size error:
Press “MENU → FUNCTION → Underscan” to zoom in/out pictures automatically when receiving HDMI signals
5. Other problems:
Please press “MENU” button and choose “MENU→SYSTEM→ Reset
→ON”
6. According to the ISP, the machine can not function properly:
ISP for program upgrades, non-professionals do not use. Please reboot your device if press accidentally!
Note: due to constant effort to improve products and product features, specifications may change without notice.
10
11

Public link updated
The public link to your chat has been updated.
Advertisement