Powr-Flite PF99 Operator's Manual And Parts List

Powr-Flite PF99 is a commercial upright vacuum cleaner designed for efficient cleaning in various commercial settings. With its powerful suction and automatic self-adjusting rug nozzle, it effortlessly removes dirt and debris from carpets and hard floors. The edge cleaning feature ensures thorough cleaning along edges and corners. Additional cleaning tools and accessories enhance its versatility for cleaning upholstery, stairs, and other hard-to-reach areas. The PF99 also features a thermal fuse protection system to prevent overheating.

PDF Download
Document
Powr-Flite PF99 Operator's Manual And Parts List | Manualzz

Advertisement

Advertisement

Advertisement

Frequently asked questions

Always connect to a properly grounded outlet, keep hair, loose clothing, fingers, and all parts of body away from openings and moving parts, do not pick up anything that is burning or smoking, and unplug the vacuum cleaner before servicing.

Unplug the vacuum cleaner. Remove the dust cover from the unit using the dust cover handle. Remove the used bag from the bag holder. Spread out the end of the new dust bag and attach it to the bag holder. Reinsert the tab on the end of the dust cover into the groove on the dust compartment housing and press it into place.

To adjust the handle, step on the PowrFoot label on the nozzle and tip the handle backwards for the low position, middle position for normal cleaning, and upright position for when cleaning tools are used or for storage.

Unplug the vacuum cleaner. Remove the filter bag and bag support. Remove the filter and clean it with water only. Allow the filter to air dry for 24 hours before reinserting it and reinstalling the bag support and filter bag.

The edge cleaning feature provides for cleaning along edges and in corners by allowing the nozzle to swivel freely.
ALP:
Preparing document for printing…
0%