)NSTALLATION'UIDE

NETGEAR RangeMax™ Wireless USB 2.0 Adapter WPN111

These setup instructions assume that you will connect to an access point or wireless router.

Estimated Completion 10 minutes.

Installation

1. First, install the WPN111 software.

Insert the NETGEAR CD.

If the CD main page does not appear, double click

Autorun.exe

on the CD.

a.

Click Install the Software . The Check for Updates window opens. b.

If you are connected to the Internet, click

Check for Updates . If not, you can choose to install from the CD.

c.

Follow the Wizard steps and click Next to continue.

When the software has been installed the Connection Wizard prompts you to shut down the computer.

2. Now, connect the wireless USB adapter.

a.

Locate an available USB port on your PC.

When prompted, shut down the computer.

b.

Connect the USB cable to the WPN111 and insert the other end of the cable into the

USB slot on your PC. See “Placing the

USB Adapter Cradle”on the other side of this card.

c.

Restart your computer.

d.

You will be prompted to select the country where you are located.

e.

Select the country and click Agree .

3. Use the Smart Wizard to set up your wireless USB adapter.

a.

Windows 2000 users go to Step b. Windows

XP or Vista users can set up the wireless adapter either with the NETGEAR Smart

Wizard (recommended) or the Windows configuration utilities.

• NETGEAR Smart Wizard: Reveals more information about each network and makes it easier to troubleshoot network connection problems.

• Windows configuration utilities: See the Windows documentation or

“Using Windows XP and Vista Wireless Configuration Utilities” at: http://documentation.netgear.com/reference/enu/winzerocfg/index.htm

.

b.

Click Next to accept the NETGEAR Smart

Wizard.

You will be prompted to let the wizard help you connect to a network

(recommended).

c.

Click Next to accept.

4. Connect to a wireless network.

a.

Select the wireless network from the dropdown list, and the wizard records your choice.

Note: Hidden networks do not broadcast the Network Name (SSID). These networks are in the drop-down list, but the Network

Name (SSID) is blank.

If the network uses security, then the Smart

Wizard detects it. b.

Follow the Wizard steps for Security (if used) and for saving a Profile.

c.

After you have reviewed the settings, click Finish .

The WPN111 icon appears in the system tray and on the desktop; and the Settings page opens. The wizard initiates your wireless connection. It could take up to a minute for your wireless connection to be established. Check the status bar.

Using the Status Bar

The status bar is located at the bottom of the Settings page.

Channel

Security Throughput

Wireless network

Signal strength

Find a Network Connection status

Understanding the Status Bar

Wireless network Identifies which wireless network you have joined.

Security • Locked: security enabled.

• Unlocked: security not enabled.

Channel

Throughput

Signal strength

Find a Network

Connection status

The wireless channel used by the network. If many wireless networks in your area use the same channel they can interfere with one another.

Wireless throughput measured in Mega bits per second.

For best performance, connect the WPN111 to a USB 2.0 port. With a USB 1.1 port the WPN111 throughput is limited to the 14 Mbps of the USB 1.1 standard.

More dots indicates a stronger signal. Usually, you will experience higher throughput when the signal is strongest.

Click Find a Network to open the Connection Wizard.

Identifies the status of your network connection.

• Connected to Internet: Wireless Internet connection is OK.

• Connected to Router: Wireless connection to the router is OK but the router is not connected to the Internet.

• 169.254.x.x or ___.___.___.___ : The wireless connection to the router is OK but there is a problem with the router. See the online help or the NETGEAR RangeMax Wireless USB 2.0 Adapter

WPN111 User Manual on the NETGEAR CD for troubleshooting tips.

Placing the USB Adapter Cradle

You can attach the RangeMax™ WPN111 Wireless USB 2.0 Adapter directly to a USB port on your computer, or use the USB cable to extend the range and obtain better wireless reception.

Follow these instructions to use the USB cable, plastic cradle, and loop and hook fastener provided in the package for better USB Adapter placement on a notebook computer:

1.

The RangeMax™ WPN111 Wireless USB 2.0 Adapter comes with three black fasteners. Locate the one that has a prickly side and attach it to the plastic cradle on the middle of the outside rear.

2.

Insert the RangeMax™ WPN111

Wireless USB 2.0 Adapter in the plastic cradle.

3.

Place one of the other pieces of loop and hook fastener on the back of your notebook monitor near the top for better reception.

Note: The last piece fastener can be placed on the side of your PC monitor nearest your wireless access point, if you are using the USB Adapter with a desktop PC.

4.

Join the pieces of the fastener to attach the USB Adapter in the plastic cradle to the notebook or desktop monitor.

See the installation instructions for your operating system before attaching the USB cable to the USB Adapter and your computer.

January 29, 2007

Technical Support

After completing the Smart Wizard configuration assistant, locate the serial number on the bottom label of your product and use it to register your product at http://www.NETGEAR.com/register .

Registration on the website or over the phone is required before you can use our telephone support service. The phone numbers for worldwide regional customer support centers are on the Warranty and Support Information card that came with your product.

Go to http://kbserver.netgear.com for product updates and Web support .

This symbol was placed in accordance with the European Union Directive

2002/96 on the Waste Electrical and Electronic Equipment (the WEEE

Directive). If disposed of within the European Union, this product should be treated and recycled in accordance with the laws of your jurisdiction implementing the WEEE Directive.

© 2007 by NETGEAR, Inc. All rights reserved. NETGEAR is a registered trademark of NETGEAR, Inc. in the

United States and/or other countries. Other brand and product names are trademarks or registered trademarks of their respective holders. Information is subject to change without notice.