Advertisement
Advertisement
This Manual Must Be Read Before Operating The Equipment
Owner / Operator’s Manual
FOR MODELS
SL-80/SL-80SS
Madison Heights, Michigan 48071
800-725-8377 www.snowexproducts.com
© Trynex International 2011 (REV 001) L1102
Customers Copy
5 – 1
Table of Contents
General Information ...................................................................................................................................................................................... 3
Introduction ................................................................................................................................................................................................. 4
Safety .......................................................................................................................................................................................................... 5
Operational Safety Information .................................................................................................................................................................. 6-8
Operating the Spreader ................................................................................................................................................................................ 9
Spreader Maintenance ............................................................................................................................................................................... 10
Troubleshooting ......................................................................................................................................................................................... 11
Warranty .................................................................................................................................................................................................... 12
Side and Bottom View Model
# SL-80/SL-80SS ....................................................................................................................................................................... 13
Handle Assembly Parts Breakdown
Model # SL-80 ....................................................................................................................................................................... 14-15
Model # SL-80SS ................................................................................................................................................................... 16-17
Tank Assembly Parts Breakdown
Model # SL-80 ....................................................................................................................................................................... 18-19
Model # SL-80SS ................................................................................................................................................................... 20-21
Pump Assembly Parts Breakdown
Model # SL-80 ....................................................................................................................................................................... 22-23
Model # SL-80SS ................................................................................................................................................................... 24-25
Notes ................................................................................................................................................................................................... 26-27
5 – 2
Have a question or need assistance?
SnowEx Customer Care
(800) 725-8377
or (248) 586-3500
Monday through Friday 8:00 AM to 4:30 PM EST
Fax: (248) 691-8378
E-Mail: [email protected]
Website: www.snowexproducts.com
© Trynex International 2011 (REV 001) L1102
General Information
CONGRATULATIONS!
The spreader you have purchased is an example of snow and ice control technology at its fi nest! Your spreader’s self-contained design is a trademark of all SnowEx products. Here’s why…
SIMPLICITY : Fewer moving parts manufactured of higher quality means minimal maintenance for your SnowEx spreader.
RELIABILITY: High impact linear low density polyethelyne hopper. State-of-the-art electronic dual variable speed control, custom engineered powder coated frame, maximum torque 12-volt motor coupled to a custom engineered transmission; found only on SnowEx products.
VERSATILITY : Multi-use capabilities allows spreading of a variety of materials for snow and ice control.
WARRANTY : Best in the industry, hands down! 2 years standard and now 5 ear extended (optional).
The bene fi ts you are about to recognize are that of time, money and effort.
We welcome you to the world of SnowEx Performance.
Registration
Record the following information in this manual for quick reference.
Spreader Model Number
Controller Serial Number Spreader Serial Number
Date of Purchase
Dealer Where Purchased
When ordering Parts, the above information is necessary. This will help to see that you receive the correct parts.
At the right is a diagram of the ID tag. This tag on the spreader is located on the frame.
Please fi ll out the warranty card with all the necessary information to validate it.
This will also give us a record so that any safety or service information can be communicated to you.
PB-100000
© Trynex International 2011 (REV 001) L1102 5 – 3
Introduction
This manual has been designed for your help. It will assist you and instruct you on the proper set-up, installation and use of this spreader.
Refer to the table of contents for an outline of this manual.
We require that you read and understand the contents of this manual completely (especially all safety information) before attempting any procedure contained herein.
THIS SIGN SHOULD ALERT YOU:
The Society of Automotive Engineers has adopted this SAFETY ALERT SYMBOL to pinpoint characteristics that, if NOT carefully followed, can create a safety hazard. When you see this symbol in this manual or on the machine itself, BE ALERT ! Your personal safety and the safety of others is involved.
De fi ned below are the SAFETY ALERT messages and how they will appear in this manual:
(RED)
Information that, if not carefully followed, can cause death!
(ORANGE)
Information that, if not carefully followed, can cause serious personal injury or death!
(YELLOW)
Information that, if not carefully followed, can cause minor injury or damage to equipment
5 – 4 © Trynex International 2011 (REV 001) L1102
Safety
Before attempting any procedure in this book, these safety instructions must be read and understood by all workers who have any part in the preparation or use of this equipment.
For your safety warning and information decals have been placed on this product to remind the operator of safety precautions . If anything happens to mark or destroy the decals, please request new ones from SnowEx.
Remember, most accidents are preventable and caused by human error. Exercising of care and precautions must be observed to prevent the possibility of injury to operator or others!
Never operate equipment when under the in fl uence of alcohol, drugs, or medications that might alter your judgment and/or reaction time.
Before working with the spreader, secure all loose fi tting clothing and unrestrained hair.
Always wear safety glasses with side shields when servicing spreader. Failure to do this could result in serious injury to the eyes.
Never attempt to lift a unit with liquid in it.
Never allow children to operate or climb on equipment.
Always check areas to be spread to be sure no hazardous conditions or substances are in the area.
Always inspect unit for defects: broken, worn or bent parts, weakened areas on spreader.
Remember it is the owner’s responsibility to communicate information on safe usage and proper maintenance of all equipment.
Always make sure personnel are clear of areas of danger when using equipment.
Never weld or grind on equipment without having a fi re extinguisher available.
© Trynex International 2011 (REV 001) L1102 5 – 5
Operational Safety Information
Summary of Important Safety Information
Chemical accident procedures
Immediate response is necessary in the event of sprayer leaks, bodily chemical contact, poisoning, or spills.
See instructions below:
Sprayer Leak
Bodily chemical contact
If the sprayer develops a leak, immediately stop spraying. Turn o_ power to the sprayer and follow directions below, as applicable.
Personal contamination can occur when chemicals splash, spill, or spray directly onto a person.
Poisoning by ingestion or inhalation
Chemical spills
1. Immediately follow First Aid instructions on chemical label.
General procedures can include: a) Eyes – immediately fl ush with water.
b) Skin – wash all contaminated skin surfaces with soap and water.
c) Clothing – remove contaminated clothing. Dispose of heavily contaminated clothing per chemical label instructions.
2. Seek medical advice if instructed on the label or the victim experiences symptoms of harmful effects. Bring the chemical label for reference.
In case of poisoning from ingestion or inhalation
If the victim has collapsed or is not breathing, call 911. Otherwise:
1. If you are the victim, immediately seek assistance from nearby personnel, because you
may become incapacitated.
2. Immediately follow _rst aid instructions on chemical label.
3. Call a poison control center for further advice. In the U.S., call 1-800-222-1222. Have the chemical label available for reference.
Chemical spills must quickly be contained and properly cleaned up.
Refer to the chemical label for any specifc clean-up instructions.
General procedures include:
1. Controlling the spill by stopping the source of the spill.
2. Containing the spill so that it does not spread and get into water sources.
3. Cleaning up the spill immediately.
4. Seeking additional advice from:
- Chemical manufacturer. See chemical label for contact information.
- State pesticide regulatory agency. In the U.S., call the National Pesticide Info. Ctr.
at 800-858-7378 for assistance in contacting your state’s agency.
5 – 6 © Trynex International 2011 (REV 001) L1102
Operational Safety Information
Summary of Important Safety Information
LISTED BELOW is a summary of safety information of particular importance.
See individual sections of this owner’s manual for more details.
DURING ASSEMBLY
CHECK and TEST completed assembly as directed in this manual. Serious injury could result from chemical leaks if sprayer is improperly assembled.
DO NOT MODIFY SPRAYER DESIGN
DURING OPERATION
READ and FOLLOW each chemical label’s instructions and warnings.
AVOID inhaling, ingesting, or coming into contact with any chemicals.
KNOW applicable licensing and regulatory requirements for the chemical you plan to use.
KNOW emergency procedures before handling chemicals. Carefully review “Chemical Accident
Procedures” listed below and later in this manual. Also see First Aid instructions on the chemical label.
WEAR protective clothing, eye protection, and chemical resistant gloves when _lling, using and cleaning the sprayer. Wear additional protective gear, such as facemask or apron, as recommended on the chemical label.
EXERCISE EXTRA CAUTION around children and pets. Pesticides are especially toxic to them. Keep sprayer and spray materials away from them at all times.
DO NOT MIX OR POUR chemicals in an enclosed, unventilated area.
DO NOT USE fl ammable or corrosive chemicals in the sprayer.
FLUSH the sprayer before switching chemicals in order to prevent dangerous chemical interactions.
STORE pesticides in a correctly labeled container and in a secure location.
MONITOR the health of operators frequently exposed to pesticides, as recommended by the chemical label or local/federal regulations.
BEFORE SPRAYING
INSPECT and PREPARE sprayer before each use as directed in this manual.
FOLLOW INSTRUCTIONS for SAFELY FUELING the engine. Gasoline is fl ammable and can explode.
Always use caution when handling gasoline.
DO NOT START sprayer until ready to spray in order to avoid unintentional spray release.
WEAR ADDITIONAL PERSONAL PROTECTIVE EQUIPMENT if you will be spraying overhead.
You will be exposed to much more chemical fallout in these applications. Wear chemical resistant head and neck protection, full face mask or halface mask with sealed goggles, and consider using a respirator.
DO NOT SPRAY when wind speed exceeds 4 MPH in order to minimize spray drift.
KEEP sprayer and spray materials away from children/pets. Pesticides can be especially toxic to children and animals.
DO NOT ALLOW anyone younger than 16 to operate sprayer since pesticides are especially toxic to children.
© Trynex International 2011 (REV 001) L1102 5 – 7
Operational Safety Information
Summary of Important Safety Information
During Spraying
• DO NOT OVERAPPLY pesticide. Apply at rate recommended by chemical manufacturer. Excess pesticide can be dangerous to humans/animals, damage desirable plants, and contaminate soil and water sources.
• DO NOT EAT, DRINK, SMOKE, RUB YOUR EYES, or TOUCH YOUR BARE SKIN while handling chemicals and spraying.
• NEVER POINT THE SPRAY GUN at people or animals.
• DO NOT SPRAY near open _ames or sources of heat.
• ALWAYS HOLD THE SPRAY GUN FIRMLY when using it to spray at higher pressures in order to prevent gun from whipping. Keep good footing and balance at all times.
• EXERCISE EXTRA CAUTION when spraying near areas accessible to children and pets.
• CLEAN up spills immediately per instructions on the chemical label.
• TURN OFF vehicle and set brake or block wheels, TURN OFF sprayer, and RELIEVE system pressure before leaving sprayer unattended.
• SEE Troubleshooting section of this manual before attempting any repairs. Wear personal protective equipment and follow safety instructions.
After Spraying
CLEAN sprayer immediately after use according to the directions provided in this manual.
DECONTAMINATE yourself after you are done spraying and have cleaned the sprayer. Wash all exposed areas of the body with soap and water, and remove and launder clothing.
DISPOSE OF or STORE remaining chemicals in secure storage with correctly marked container.
Transporting Safety
READ safety instructions in your vehicle manual with regard to carrying heavy cargo loads.
DO NOT ALLOW drivers younger than 16 to drive the vehicle with the _lled sprayer attached.
MAKE SURE SPRAYER IS SECURELY ATTACHED to vehicle.
EXERCISE CAUTION in vehicle handling when driving with _lled sprayer to avoid loss of control or rollover.
o Keep speed to a minimum so you can maintain control. Reduce speed prior to turns.
o Allow for more distance to stop.
o Avoid any sudden steering maneuvers, starts, or stops that could create liquid sloshing in the sprayer and instability.
SLOW DOWN and EXERCISE EXTRA CAUTION on sloped or uneven terrain. Pick the most level route possible across _elds--drive up and down slopes when necessary, rather than across. Use a vehicle equipped with a roll over protection system (ROPS) if you will be working on non-level terrain.
BE AWARE that visibility may be reduced when making turns or backing up.
DO NOT RIDE or TRANSPORT cargo on the sprayer.
TURN OFF both sprayer and vehicle, and SET BRAKES before leaving unattended.
DO NOT ATTEMPT to lift with liquid in sprayer
5 – 8 © Trynex International 2011 (REV 001) L1102
Sprayer Operation
Model # SL-80/SL-80SS
1) Fill sprayer with material through top hole.
Caution: Always use gloves and safety goggles when fi lling sprayer.
2) Place valve in position for desired use.
3) If using spray wand never point at objects ie: humans, vehicles etc.
4)
If using spray nozzle keep away from objects ie: humans, vehicles etc. at least 10 feet.
5) When not moving or spraying place switch in off position.
© Trynex International 2011 (REV 001) L1102 5 – 9
Sprayer Operation (con’t) & Electrial Schematic
Model # SL-80/SL-80SS
1) Charge battery after each use. Disconnect harness and connect to battery charger as shown below. Then plug charger into 110v outlet.
F50107
F50016
F50106
F50082
5 – 10 © Trynex International 2011 (REV 001) L1102
Troubleshooting & Maintenance
Model # SL-80/SL-80SS
Whenever service is necessary, your local SnowEx Dealer knows your Sprayer best. Take your Sprayer to your local dealer for any maintenance or service needs on your unit. If this is not possible, the Troubleshooting Guide below may assist you in identifying the problem.
Warning: First read all warning instructions and safety messages before servicing your Sprayer.
Preliminary Checks
• Be sure all electrical connections are tight and clean.
• Be sure nothing is obstructing the nozzles.
PROBLEM
Pump doesn’t run.
POSSIBLE CAUSE
Loose electrical connections.
Pump Seized.
Electrical short.
SOLUTION
Check all connections.
Replace pump.
Check for bare wires.
Liquid not spraying. Empty tank.
Pump not running.
Obstructed nozzle.
Fill tank.
Refer to Problem 1
Remove and clean.
Maintenance:
1) Grease Axle zerks after every 20 hours of use.
2) When putting into storage for season drain tank and hose lines and fl ush pump.
© Trynex International 2011 (REV 001) L1102 5 – 11
Warranty
Li
m
ited Warranty
Snowe x products are warranted for a period of two y ears fro m the date of purchase against defects in m aterial or work m anship under nor m al use and service, subject to li m itations detailed below. Warrant y period of two y ears begins on the date of purchase b y the original retail user.
The m ust be returned to the m anufacturer for this warrant y to beco m e effective. This warrant y applies to the original retail purchaser onl y . This warrant y does not cover da m ages caused b y i m proper installation, m isuse, lack of proper m aintenance, alterations or repairs m ade b y an y one other than authorized Snowe x dealers or Snowe x personnel. Due to the corrosive properties of the m aterials dispensed b y spreaders, Tr y ne x does not warrant against da m age caused b y corrosion. Warrant y clai m s b y the user m ust be m ade to the dealer fro m where the product was purchased, unless otherwise authorized b y Snowe x . Snowe x reserves the right to deter m ine if an y part is defective and to repair or replace such parts as it elects. This warrant y does not cover shipping costs of defective parts to or fro m the dealer.
LIMITATION OF LIABILITY
Neither x , nor an y co m pan y affiliated with it, m akes an y warranties, representations for pro m ise as to the perfor m ance or qualit y other than what is herein contained. The liabilit y of Snowe x to the purchaser for da m ages arising out of the m anufacture, sale, deliver y , use or resale of this spreader shall be li m ited to and shall not e x ceed the costs of repair or replace m ent of defective parts. Snowe x shall not be liable for loss of use, inconvenience or an y other incidental, indirect or consequential da m ages, so the above li m itations on incidental or consequential da m ages m a y not appl y to y ou.
NO DEALER HAS AUTHORITY TO MAKE ANY REPRESENTATION OR PROMISE ON BEHALF OF
SNOWEX, OR TO ALTER OR MODIFY THE TERMS OR LIMITATIONS OF THIS
WARRANTY IN ANY WAY.
5 – 12 © Trynex International 2011 (REV 001) L1102
Side and Bottom Views
Model # SL-80/SL-80SS
© Trynex International 2011 (REV 001) L1102 5 – 13
Handle Assembly Parts Breakdown
Model # SL-80
5 – 14 © Trynex International 2011 (REV 001) L1102
Handle Assembly Parts Breakdown
Model # SL-80
© Trynex International 2011 (REV 001) L1102 5 – 15
Handle Assembly Parts Breakdown
Model # SL-80SS
5 – 16 © Trynex International 2011 (REV 001) L1102
Handle Assembly Parts Breakdown
Model # SL-80SS
© Trynex International 2011 (REV 001) L1102 5 – 17
Tank Assembly Parts Breakdown
Model # SL-80
5 – 18 © Trynex International 2011 (REV 001) L1102
Tank Assembly Parts Breakdown
Model # SL-80
© Trynex International 2011 (REV 001) L1102 5 – 19
Tank Assembly Parts Breakdown
Model # SL-80SS
5 – 20 © Trynex International 2011 (REV 001) L1102
Tank Assembly Parts Breakdown
Model # SL-80SS
© Trynex International 2011 (REV 001) L1102 5 – 21
Pump Assembly Parts Breakdown
Model # SL-80
5 – 22 © Trynex International 2011 (REV 001) L1102
Pump Assembly Parts Breakdown
Model # SL-80
© Trynex International 2011 (REV 001) L1102 5 – 23
Pump Assembly Parts Breakdown
Model # SL-80SS
5 – 24 © Trynex International 2011 (REV 001) L1102
Pump Assembly Parts Breakdown
Model # SL-80SS
© Trynex International 2011 (REV 001) L1102 5 – 25
Notes
5 – 26 © Trynex International 2011 (REV 001) L1102
Notes
© Trynex International 2011 (REV 001) L1102 5 – 27
Advertisement
