windham

side table style # WNSIDTBLRD (red) dpci # 249-16-0739 tcin # 14122477 style # WNSIDTBLGY (gray) dpci # 249-16-0727 tcin # 14373267 style # WNSIDTBLWH (white) dpci # 249-16-0718 tcin # 14372250 style # WNSIDTBLBL (teal) dpci # 249-16-0729 tcin # 14373230

>> assembly instructions

© 2019 Target. The Bullseye Design is a trademark of Target Brands, Inc. All rights reserved.

2

Congratulations on your latest Target purchase.

Now what? Don’t start sweating over this box of parts. This will be easy. We did the hard work for you.

All you need to do is follow our simple instructions and you’ll be on your way to transforming your room in no time. Good luck—though we’re confident you won’t need it.

before you begin

1. Check for damaged or missing parts. Call 1-855-MYTGTHOME (855-698-4846) to order missing supplies.

2. Use the carton as a working surface to prevent product damage during assembly.

3. Read through and review assembly steps.

4. Gather all tools prior to assembly.

tools needed

table of contents

introduction

hardware

parts list

how to use the cam lock system

assembly

5

6

2

4

7-12

QUESTIONS? Just call 1-855-MYTGTHOME (855-698-4846) for parts and service. For faster service, have the style number and dpci number ready when calling. 3

hardware

(H1) x 12 wooden dowel

(H2) x 14 cam bolt

(H3) x 14 cam

(H4) x 8 flat head screw

(H5) x 1 knob bolt

(H6) x 1 knob

exploded diagram

J

K

L

H

I

F

G

ITEM DESCRIPTION QUANTITY

A top panel 1

B

C

D right side panel left side panel back panel

1

1

1

E shelf 1 drawer face drawer bottom drawer back drawer right side drawer left side top trim bottom trim

1

1

1

1

1

1

1

5

how to use the cam lock system

Screw cam bolt into panel Align cam bolt(s) with cam(s) and insert all the way into cross-bored hole(s)

Push cam into panel - arrow feature on cam top points to panel edge

6

Rotate cam(s) clockwise 180° to lock panels together

Panels should be tight against each other and connection should be rigid

step 1: attach shelf/back panel/bottom trim/top trim to left side panel

(H1) x 4 wooden dowel

(H2) x 5 cam bolt

(H3) x 5 cam

Carefully tap small wooden dowels into place. Leave 1/2” of the dowels sticking out.

1.2. Screw-In cam bolts must be screwed down flush.

1.3. Refer to page 6 for instructions on how to use the cam lock system.

1.4. Do not over tighten bolts.

7

step 2: attach right side panel

(H1) x 4 wooden dowel

(H2) x 5 cam bolt

(H3) x 5 cam

8

Carefully tap small wooden dowels into place. Leave 1/2” of the dowels sticking out.

2.2. Screw-In cam bolts must be screwed down flush.

2.3. Refer to page 6 for instructions on how to use the cam lock system.

2.4. Do not over tighten bolts.

step 3: attach top panel

(H1) x 4 wooden dowel

(H2) x 4 cam bolt

(H3) x 4 cam

3.1. Carefully tap small wooden dowels into place. Leave 1/2” of the dowels sticking out.

3.2. Screw-In cam bolts must be screwed down flush.

3.3. Refer to page 6 for instructions on how to use the cam lock system.

3.4. Do not over tighten bolts.

9

step 4: attach drawer left and right sides to drawer face

(H4) x 4 flat head screw

10

4.1. Align screws with pre-drilled holes.

4.2. Do not over tighten screws.

step 5: attach drawer bottom, drawer back and knob

(H4) x 4 flat head screw

(H5) x 1 knob bolt

(H6) x 1 knob

5.1. Align screws and bolt with pre-drilled holes.

5.2. Do not over tighten screws and bolt.

11

12

step 6: install drawer

30 lbs.

1. This unit has been designed for the weight shown. Exceeding this recommended weight could result in excessive “sagging” of the top. Extreme overloading can cause failure of the top and possible injury.

2. Furniture Care Instructions: Dust with a clean, lint-free cloth. Use a spray furniture polish as needed.

QUESTIONS? Just call 1-855-MYTGTHOME (855-698-4846) for parts and service. For faster service, have the style number and DPCI number ready when calling. 13

© 2019 Target. The Bullseye Design is a trademark of Target Brands, Inc. All rights reserved.